Sewing machine Janome W23U: technical design, characteristics, reviews. Sewing machine Janome W23U: technical device, characteristics, reviews Sewing machine janome w23u characteristics

Characteristics

Specifications Janome My Excel W23U (ME W 23U)

Automatic bobbin winding

Each machine has a special device for winding the bobbin. For sewing machines with a horizontal hook, the bobbin is inserted into a bobbin case. For machines with a vertical shuttle, the bobbin is inserted from above, directly into the shuttle. The bobbin thread is threaded under the spring plate of the shuttle device or bobbin case in any case. Such a “trifle” as winding thread on a bobbin often creates a lot of inconvenience when sewing. Actually, anyone, even a novice seamstress, knows how to wind thread on a bobbin, especially since there is visual instructions and this operation itself is very elementary.

The weight of a sewing machine consists of the materials from which it is made. If the old high-production models, the body of which is made of metal, then their weight will be much greater than the weight of modern computerized and simple household machines, the body material of which is plastic.

Types of loops:

A standard laundry buttonhole can be made on all electromechanical sewing machines, with the exception of the most primitive models. However, electromechanical sewing machines cannot produce other types of buttonholes.

A straight slotted linen loop is made in semi-automatic mode without turning the fabric in four steps. To make a buttonhole, four switches must be made: when sewing the left side of the buttonhole, the far bartack, the right side and when sewing the near bartack. Depending on the size of the button, most electromechanical sewing machines can sew the buttonhole automatically. To carry out this operation, you should place the button in the loop measuring device of the presser foot to set the density and width of the buttonhole; the machine will perform all other operations automatically.

Sewing a buttonhole in automatic mode depends entirely on the quality of the sewing machine, while sewing a buttonhole in semi-automatic mode depends on the user’s skills. Computerized sewing machines sew buttonholes automatically, and most models can sew buttonholes to fit a button. And in the most expensive models of sewing machines, you can even set the desired size of the loops. Computerized sewing machines sew buttonholes automatically, and most models can sew buttonholes to fit a button. And in the most expensive models of sewing machines, you can even set the desired sizes.

linen

Types of sewing stitches:

Working lines:

In addition to the traditional straight stitch and zigzag, working stitches usually include buttonholes, overlock stitches, stitches for invisible hemming of the bottom of a product, stitches for processing and sewing elastic fabrics, stitches for quilting, as well as various other stitches.

Decorative stitches:

Computerized sewing machines perform a variety of decorative stitches, including: openwork stitches, hemstitches, cross stitches, satin stitches, scalloped hems and various ornaments. A complex model of a sewing machine can contain several alphabets in memory, and some models boast the presence of not only the Latin alphabet, but also the Cyrillic alphabet, while others even have hieroglyphs.
Modification of any stitch on a computerized sewing machine occurs by changing the stitch width and length. Some models feature vertical or horizontal mirroring functions, and can also rotate stitches.
Computerized sewing machines have a built-in memory in which you can store certain combinations of letters or a sequence of various interesting elements with which you can embroider a beautiful border.

overlock, straight, scalloped, straight stitch offset to the left, blind hem

Making loops:

The linen buttonhole can be made on all electromechanical sewing machines, with the exception of the most primitive models. However, electromechanical sewing machines cannot produce other types of buttonholes. A straight slotted linen loop is performed in a semi-automatic mode without turning the fabric in four steps. To make a buttonhole, four switches must be made: when sewing the left side of the buttonhole, the far bartack, the right side and when sewing the near bartack. Depending on the size of the button, most electromechanical sewing machines can sew the buttonhole automatically. To carry out this operation, you should place the button in the loop measuring device of the presser foot to set the density and width of the buttonhole; the machine will perform all other operations automatically.

automatically

Model year:

The year in which the manufacturing company's engineers developed this model for serial assembly. More conservative models, which were produced from 1990 to 2000, have ambiguous design decisions, such as pushers and reververs when choosing an operation on elastic bands, which does not allow frequent switching between operations. This disables the operation switching mechanism. Outdated engines are used, which can overheat and, as a result, melt body parts. Slow sewing speed. Due to the high weight, there is practically no possibility of transportation, bulky dimensions.

New equipment model range after 2010, it is devoid of such difficulties, since the latest technologies are used in production - stepper motors, lightweight heat-resistant alloys in the manufacture of parts, the use of electronics, which allows the equipment to be as functional and in demand as possible. Reliability characteristics in the latest models several times higher than in conservative ones.

Number of loops performed:

Computerized sewing machines can produce up to ten types of buttonholes, such as rounded buttonholes, knit buttonholes, eyelet buttonholes, and others. A traditional clothes loop is also included in their quantity. The machine allows you to make a loop yourself, and then enter it into the memory of the sewing machine in order to quickly and accurately make several more identical loops for a particular product.

Number of operations:

Depending on the sewing machine model, the number of operations may vary. For example, more early models were distinguished by the ability to carry out no more than 10 operations, and modern computerized sewing machines can perform up to several hundred operations.

With the help of additional loopers, the threads are interlaced in the overlocker. The ability to complete a particular number of lines depends on which loopers the overlocker is equipped with. Most overlockers have an upper and lower looper, so you can use them to sew a large number of overlock seams, for example: 4-thread overlock, 3-thread narrow overlock, 3-thread wide, 3-thread Flatlock narrow, 3-thread Flatlock wide, 3-thread rolled hem, 3-thread hem, etc.

Ruler on the body:

Some sewing machines have a ruler on the sleeve. It is extremely convenient for marking products and measuring distances. Using a ruler on the body, it is convenient to leave allowances for sewing and perform cutting, since you can always visually see which part of the product will be processed. Sometimes the ruler is made with phosphorescent paint so that it can be seen in poor lighting. When purchasing an overlocker, you should make sure that the ruler is applied with good paint and will not be erased when sewing.

absent

Maximum presser foot lift height:

Maximum stitch length:

Using this parameter, it is easy to determine what thickness of fabric can be processed on this sewing machine. In order to sewing machine I didn’t make any skips while sewing, it is necessary to supply a sufficient amount of thread, usually this applies to dense materials. The stitch length of the best sewing machines is from 5 to 6 millimeters, but inexpensive sewing machines can only boast a stitch length of up to 4 millimeters.

Maximum sewing speed:

The sewing speed of a sewing machine is calculated by the number of stitches performed per minute. Based on this, the higher the sewing speed, the faster you can get the finished product. Naturally, in order for the sewing speed to be as high as possible, you must have certain skills. As practice shows, the sewing speed is also affected by the type and power of the motor of a particular modification of the sewing machine. For example, electromechanical machines can produce speeds of up to 600 sti/min, computerized sewing machines - up to 800 sti/min, but this is when sewing using a pedal. But if you sew using the start/stop button, the sewing speed will not exceed 600 sti/min.

Maximum stitch width:

The expressiveness and width of the decorative stitch completely depends on the width of the stitch. At best, the stitch width will be around 6 millimeters, although household sewing machines can boast a stitch width of 7 to 9 millimeters.

Lower conveyor:

Playing important role in determining the possibility of sewing fabrics of different densities and capricious textures. Thus, there is a dependence on the contact area of the lower conveyor ( rack) to the fabric and the quality of sewing complex fabrics (the larger the contact area, the better the quality of the fabric processing).

As a rule, for processing medium-thick materials, a lower conveyor is used, which has 4 or 5 segments and 6 teeth on its front sides. If the number of segments and teeth is smaller, it may become difficult to sew thin fabrics. But if the number of segments and teeth is greater, the range of work with more complex types stitching materials.

When working with fabric, you need to pay attention Special attention for sharpening and tooth structure:

Needle threader:

This is a convenient and practical device built into the overlocker and designed for quickly threading the needle. A needle threader is simply indispensable for seamstresses who cannot boast of perfect vision, and significantly speeds up work when changing threads frequently, for example, different color. To quickly thread a needle, you need to pass the thread through the hook of the needle threader and release (or press, if provided by the design) the small lever. The thread will instantly push into the eye of the needle, and all you have to do is remove the resulting loop.As you know, there are several main types of needle threader: standard, automatic and absent.

Work surface lighting:

This function is very convenient and practical, especially when working in a poorly lit room or at night. There are the following types of work surface lighting: additional special lighting, LED lightening, as well as lighting using incandescent or dual LED.

Incandescent lamp

It is an outdated illuminating element and is characterized by a short service life, a sharp dependence of the service life and luminous efficiency on voltage, high energy consumption and the fact that the color temperature lies in the range of 2300 - 2900 K, which leads to a yellowish tint. Incandescent lamps have already been banned in many countries due to the need to save energy and also to reduce emissions carbon dioxide in atmosphere.

LED backlight

This the best option illumination of the working surface, which is provided in many models of modern sewing machines designed for home use. LED lighting differs from other lighting devices in its low energy consumption, high color temperature and unlimited service life.

Dual LED

An additional set of LEDs can be built into the sewing machine arm for brighter illumination of the working surface. Most often, additional lighting is installed in the central part of the sleeve. This makes it possible to illuminate much large area than a single point LED.

Additional special lighting

As a rule, additional special lighting is used in expensive sewing machines, and can be connected via a USB port. This lighting can be directed to any place, and the lamp itself will be easy to attach to any part of the sewing machine using a suction cup.

incandescent lamp

Needle positioning

The complex concept of “positioning,” which characterizes one of the functions of electronic sewing machines, turns out to be very simple in reality.Typically the needle positioning button looks like this:

And it works as follows. If you press it once, the needle will always remain up at the end of sewing, i.e. the closer will operate. In this case, it is very convenient for you to form a thread, or switch to another operation. Well, if you press again, the needle will remain down (in the fabric). It will be convenient for you to turn the fabric to change the sewing direction.However, do not think that this function limits your ability to scroll the flywheel manually. If you need to manually go through some difficult section, then this can always be done.

Sewing field:

Usually it comes in two types: standard and enlarged. The size of the working surface in a sewing machine is determined using the reach of the sleeve. Thus, depending on the length of the sleeve overhang, a product of a certain length can be processed on the surface of the sewing machine, i.e. the larger the sleeve, the larger the area of material processed on the working surface. There are so-called sewing machines with an increased working surface, in which the distance between the needle and the bed should be more than 250 millimeters. In addition, the working surface can be increased by adding a side table. It is important to remember that the working surface should always be increased to the left of the needle. Those sewing machines that come with an extension table are classified as machines with an increased working surface.

standard

Power consumption:

Some buyers of sewing machines, when choosing a model that can process very dense fabric and fabric folded in several layers, consider the power of the sewing machine to be the main parameter. However, this is a misconception. The fact is that the power of a sewing machine is a total parameter, which is equal to the power consumed by the electronics unit and the lighting lamp. Therefore, if there is a heavy load, the motor begins to consume more current from the network. It is important to understand that all engines lose power. This parameter is not specified in technical passport devices, but it exists, and represents the difference between the electrical energy consumed and the electrical energy supplied mechanical power. Modern sewing machines are equipped with motors that consume less power, but thanks to more accurate indicators of power consumption and loss, their operating efficiency will be much higher than that of outdated or budget motors. Typically, these types of motors are used in computerized sewing machines, where they work in conjunction with stepper motors to significantly reduce energy consumption without wasting power.

absent

Adjusting the presser foot pressure on the fabric:

A mechanism that allows you to regulate the force with which the foot presses on the fabric. The pressure required varies in certain cases: if thick tissue is being processed, then less force is needed to allow the tissue to pass; If the fabric is strong and thin, then more pressure is needed. When working with knitwear, the presence of such a mechanism is simply necessary. The fact is that knitwear can be deformed and stretched under the influence of the foot, but this should not happen. The mechanism helps create ideal pressure and does not allow the knitwear to stretch. In machines with a fabric conveyor built on top, this regulator may not be used. Today you can find models of machines with different operating principles: switchable using a regulator, through manual adjustment, with automatic switching according to the type of fabric and with fixed pressure.

Needle standard:

Until recently, Overlockers and Sewing machines were equipped and sewed exclusively with branded needles, which had their own standard and markings. Currently, all models on the market use universal needles for household overlockers and sewing machines. Modifications can be equipped with needles of the standard 130/705H (standard) and ELx705 (with an increased eye size).

Removable sleeve platform:

"Sleeve platform"or "Free Sleeve"- this is the narrow part of the sewing machine (overlocker) which is intended for comfortable work with narrow and round productssuch as cuffs, sleeves, neckline and others. A regular platform becomes a sleeve when the user removes the compartment (box) for accessories (it is removed or moved). The presence of this function greatly facilitates the process of working in hard-to-reach places.

Machine type:

Today, there are many classifications of modern sewing machines, for example, according to the degree of automation, they are non-automatic, fully automated and semi-automatic, which in turn are divided into cyclic and non-cyclic; and according to the method of operation and control, computerized, electronic and electromechanical sewing machines are distinguished.

Computerized sewing machine

This modification of the sewing machine is equipped with optical sensors for the position of the main shaft, a display, flash memory, a microprocessor and stepper motors that control the position of the needle bar and stitch pitch. Thanks to the features of this control, there are no restrictions on the number of lines performed and their complexity. All sewing operations are stored in the machine's memory. This is very convenient, because with the help of simple manipulations on the electronic panel you can quickly select and configure the required sewing operation, and some sewing parameters are adjusted automatically.

Electronic sewing machine

This machine model has electric drive and partly electronic and mechanical control. It can be controlled using electronic and mechanical regulators and switches located on the plastic case at the front. The sewing speed is adjusted using an electronic regulator located on the body of the model, as well as using an electronic pedal. The presence of an electronic sewing speed controller allows you to control the maximum number of revolutions. This is necessary to control the maximum sewing speed. The regulator reduces the risk of material damage. The electronic controller can also control not only the sewing speed, but also monitor the location of the needle.

Electromechanical sewing machine

It is a sewing machine with mechanical control and electric drive. Such a machine is controlled using mechanical regulators and switches, which are located on its plastic body for convenience. Depending on the pressing force on the rheostat pedal, you can adjust the sewing speed. The sewing speed itself does not change either up or down.

Overlock (edging machine)

This is a type of sewing technique that performs the functions of processing frayed edges of fabric when sewing textiles. In one single pass, the overlocker can trim the edge of the product, stitch the parts and overcast the cut. With the help of an overlocker, the edge of the product takes on a finished and neat look. At the same time, thanks to special knife installed in an overlocker, the product is deprived of excess fabric, so it is not recommended to overuse edge processing. As a rule, any textile product needs trimming and edge processing, and it is simply not possible to work with fabrics that have increased flowability and unraveling without an overlocker.

Coverlock

This is an overcasting machine, which contains the functions of an overlocker (performs overcasting stitches) and a cover stitching machine (has the ability to perform knitted cover seams). And all this is because the carpet lock has an additional looper, the so-called expander. The most used carpet locks are 4-thread and 5-thread, although you can often find a carpet in which the number of threads reaches 12. An important advantage of the coverlock is its ability to produce decorative stitches. In addition, with its help you can make not only various flat seams (single-needle two-thread, two-needle three-thread narrow, etc.), but also overcasting and overcasting (two-thread stitch, three-thread stitch, a combination of 2-two-thread stitches, three-thread rolled seam, etc. .).
The only drawback of the carpetlock is the changeover from the flat seam mode to the overcast seam, which is not always convenient and can take some time, especially if the process sequence requires constant change of seams. However, a carpet locker allows you to create a larger number of seams than an overlocker. Therefore, when choosing between an overlocker and a coverlocker, you need to clearly understand how much time will be spent on the work, and which sequence of actions will be used more often.

Coverstitch (flat stitch) machine

Its operation is based on the principle of a chain stitch, when a stitch is formed through the interaction of a needle and a looper. A cover stitch machine is mainly used to sew seams on stretch knitted material, because it makes cover seams very high quality and reliably. As you know, such a seam can be created using a regular sewing machine, but with the addition of a double needle, or using a decorative stitch. However, the quality of a seam made on a conventional machine may not satisfy experienced users.
The advantage of cover stitching machines is their ability to work with both textured threads and polyester threads. The lines always turn out beautiful and even. Using a stitching machine, you can make decorative trims and attach elastic to sweatpants. The cover stitcher can sew 4 stretch flat stitches (triple flat stitch, wide flat stitch, narrow right stitch and left flat stitch). This machine can use from one to three needles.

electronic

Lubricant type:

As you know, lubricants are an integral attribute of any equipment, including sewing. They are used to reduce friction of moving parts and increase the service life of the machine. The reliability of mechanical units and components of a sewing machine directly depends on the consistency and type of lubricants used. The following types of lubricant are available: centralized silicone, silicone and graphite.

Graphite grease

This is the most common lubricant, the popularity of which is largely determined by its availability and optimal price, which are the main advantages of this group of lubricants. The disadvantages include the following: firstly, this type of lubrication leads to increased friction of the driving units, and secondly, it may cause bad smell during processing, thirdly, the lubricant has a hard consistency and low lubricating properties.

Silicone Grease

The best type of lubricant that is used almost everywhere today. Silicone grease is produced by synthesizing semi-liquid silicone oil and a chemical thickener. This lubricant does not have an erosive effect on lubricated components and does not corrode rubber seals. From positive qualities lubricants can be distinguished: high rates of processing, absence of odor, improved performance in rubbing units and vapors, water resistance, sealing and a high range of operating temperatures.

Central silicone grease

This lubricant is used once and in one place, and then through special tubular channels it reaches those parts of the sewing machine that most need constant and timely lubrication. This type of lubricant is the most effective, as it assumes its uniform distribution (without smudges or flooding) to the necessary parts and components.

silicone

Shuttle type:

Exist Various types shuttle, among which there are four main ones:

vertical rotary;
horizontal rotary;
vertical swinging;
shuttle BERNINA 9.

During sewing, the hook of the sewing machine can make oscillatory movements or rotate in vertical or horizontal planes. Based on the type of movement that the shuttle makes during sewing, it has corresponding names: horizontal rotating, swinging shuttle and vertical rotating double-running shuttle.

Vertical swing shuttle

This type of shuttle is a classic one, and it has been installed on many sewing machines for decades, hence its name - classic. This type of shuttle is characterized by insignificant vibration and noise characteristics during operation. In addition, it must be lubricated regularly. Among the advantages of the shuttle, it is worth highlighting the simplicity and familiarity of the design, which is much more convenient than horizontal shuttles. Thanks to the presence of an adjusting screw, which is responsible for the tension of the lower thread, the sewing machine can be adjusted to work with any type of material without resorting to outside help. Majority modern manufacturers Sewing machines still use a vertical swinging hook in their proposed designs.

Horizontal rotary shuttle

This type of shuttle is installed in many models of modern sewing machines, but it has a number of disadvantages, for example, a straight stitch may deviate slightly to the side, and there is no way to adjust the tension of the lower thread. In the first case, deviations occur due to the fact that the axis of rotation of the shuttle is located in a parallel plane of movement of the needle. And in the second case, the thread tension can only be adjusted by a specialist service center. Positive characteristics include visualization of the remaining lower thread on the bobbin, the need for infrequent lubrication, smooth and quiet operation during rotation and ease of threading.

Vertical rotary shuttle

This type of shuttle is installed on premium sewing machines. Among the advantages of the shuttle, it is worth highlighting the excellent ratio of comfort and manufacturability. The shuttle provides a perfectly even stitch path, is distinguished by smooth and quiet operation, reliable design and ease of threading. The device does not require additional lubrication. The only drawback is the high cost of a machine with this type of shuttle.

Shuttle Bernina 9

As you know, the Bernina 9 shuttle, which is equipped with sewing machines of the new 7th series, is considered an absolute world novelty, combining the advantages of two main types of shuttle. It is made from high quality materials that have undergone special processing. Expensive and thorough polishing of every part in contact with the threads guarantees a constant and optimal tension of the thread, and also ensures the smooth movement of the entire mechanism.

The Bernina 9 shuttle has positive characteristics vertical rotary shuttle, and also has an increased size, which allows you to wind 80% more threads onto the retractable bobbin of the shuttle than on a regular one, so with one full bobbin you can embroider and sew much longer, without having to be distracted by re-threading it. Threading the Bernina 9 shuttle is much faster and easier than a vertical shuttle: just press a special button, after which the bobbin will come out of the bobbin holder on its own.

Manual thread trimmer

On the sleeve of a sewing machine there is usually a special blade for manual thread cutting. After the user has completed the necessary operation, he must remove the material from under the presser foot, slightly tighten the upper one and bobbin thread and cut them using this blade. Among the disadvantages of the device, it is worth noting the less than ideal ease of use and high thread consumption.

Automatic thread trimmer

The knife for trimming the lower and upper threads is located under the lower conveyor. It is proposed to set the knife in motion by pressing a special button. The advantages of the device include ease of use and significant thread savings.

How to sew, and how to use a double needle, how to thread two needles at the same time? The threads are threaded in the same way as with one needle, only instead of one spool, two will be used. And both threads will go through the same tensioner at the top.

Stitched materials:

There are several types of stitched materials: heavy, extra-heavy, light, extra-light and medium. When using one or another stitched material, you should pay special attention to the set of threads and needles. It is also necessary to remember several specific factors that affect the quality of sewing, as well as the simplicity and ease of working with the material. Firstly, this is the maximum and minimum stitch length, secondly, the level of height and lift of the foot, thirdly, the required gap between the nose of the shuttle and the tip of the needle, fourthly, the size of the hole in the needle plate and, lastly, the features of the lower feeder .

Lower Conveyor (Rack)
Plays an important role in determining the possibility of sewing fabrics of different densities and capricious textures. Thus, there is a dependence on the contact area of the lower conveyor (rack) to the fabric and the quality of sewing complex fabrics (the larger the contact area, the better the fabric processing will be done).
As a rule, for processing medium-thick materials, a lower conveyor is used, which has 4 or 5 segments and 6 teeth on its front sides. If the number of segments and teeth is smaller, it may become difficult to sew thin fabrics. But if the number of segments and teeth is greater, the range of work with more complex types of piercing materials may increase.
When working with fabric, you need to pay special attention to the sharpening and structure of the teeth:

slightly rounded sharpening of the lower teeth makes it possible to work with ultra-light and lightweight materials(organza, chiffon);
the average degree of roundness allows for high-quality processing of light knitwear and medium-thick materials (linen, cotton, knitwear, suiting fabrics);
when sharpening teeth, you can use the heaviest and very dense materials (drape, flannel, teak, denim) in your work.

It is worth remembering that some household sewing machines, suitable exclusively for sewing heavy and medium-sized materials (denim, leather, drape, etc.), cannot always be used for sewing thin, delicate fabrics, and vice versa.
Modern universal sewing machines, designed to work with different types of fabric, usually have the widest possible lower conveyor with moderately sharp rounded teeth, which significantly affects the market value of the model.

Stitch length
Not everyone knows, but stitch length is one of the most... important characteristics when choosing a sewing machine, since the maximum stitch length can be used to judge the capabilities of working with heavy and super-heavy stitching materials (denim, leather, drape). So, the thicker the material being processed, the more thread it is necessary to feed so that the sewing machine does not make gaps during the sewing process. The best sewing machines have a stitch length of five to six millimeters, but most modern household machines maximum length the stitch is no more than four millimeters.

The gap between the tip of the needle and the nose of the shuttle
It must immediately be said that this gap should not exceed 0.3 millimeters, but in some cases it still exceeds this norm, reaching 1 millimeter, which is fraught negative consequences. For example, gaps may appear when the spout passing next to the vent loop does not grab it. But other factors also influence the formation of the loop and its firm grip by the nose of the shuttle. Firstly, this is the quality of needles and fabrics, secondly, the size and type of needle, thirdly, thread tension (correct and adjusted tension of the lower and upper threads has great value when achieving a perfectly even and high-quality stitch). However, the gap between the tip of the needle and the nose of the shuttle is the main characteristic that affects stitch skipping and, accordingly, the type of material being sewn. If the gap turns out to be larger than normal, it must be adjusted, and if this cannot be done, you can safely consider purchasing another sewing machine.

Needle plate hole size
The type of materials being sewn can be determined by the size of the hole in the needle plate. The hole for the needle entry should be small when sewing ultra-light and lightweight materials, this is necessary to prevent the material from chewing and the fabric from falling through when pierced with a needle. In addition, this size of the hole in the needle plate will allow you to achieve an ideal stitch trajectory, which, in turn, is important for appearance products. There are several types of needle plates: adaptive and additional. An additional needle plate allows you to manually adjust the hole size, making it possible to work with all types of fabrics.

Presser foot lift

This parameter determines the distance between the rack that advances the materials to be sewn and the presser foot of the sewing machine. Taking into account the value of this parameter, it is easy to determine the thickness of the fabric that can be placed under the foot for subsequent processing. It is important to understand that even if the material passes under the foot of the sewing machine, this does not mean that the latter will be able to process it efficiently. There are a number of factors that are decisive in determining whether a sewing machine can process a given material.

heavy, super heavy

Rating 5

Pros: Powerful, can be adjusted to any fabric. Works well with hard synthetics (I sew a sail, thick synthetics + straps + zig-zag). At the same time, if you reconfigure, it sews tulle and other small items just as well. The walking foot works great on curtains.

Disadvantages: No

Comment: Excellent model. Sews everything! From thin curtains to leather and synthetic belts. Record - 4 layers of belt + 2 layers of synthetics.

Pasha N. September 15, 2015, Arkhangelsk

Rating 5

Advantages: high-quality stitches on different types of fabrics, not noisy, hard case

Disadvantages: I haven’t found any in 4 years of active use.

Comment: I am very pleased with the machine, I sew a lot and have never had any problems. It copes with completely different fabrics: suits, chiffon, and a sweater with lycra (the carpet locker didn’t want to adjust, but I urgently needed to sew a T-shirt - Janomochka miraculously sewed everything together). The car is great! The only thing I want to make a reservation is that I don’t skimp on needles and threads, I only use quality ones.

Rating 5

Pros: I really like this sewing machine. I tried to sew different materials: from leather to knitwear. Everything suits me. Easy to use, you can figure it out without any difficulties. Of course, by modern standards, it is already morally outdated, but for the undemanding consumer it is 100% suitable. It is necessary to strictly observe the needle-thread-fabric ratio, then all the lines will be even. Thick areas pass without problems. I bought a bunch of paws - for models from this company they are very cheap.

Disadvantages: It is inconvenient that to reverse you have to hold the button continuously. There is no way to hold the fabric with your hands at this moment. But this may be due to my inexperience.

Comment: At first I wanted a more expensive model, but after reading a lot of positive reviews about this hard worker, I bought it. And I never regretted it.

Olga and. June 23, 2013, Tomsk \Using experience: several months

Rating 5

Advantages: Workhorse, I’ve had it for 10 years, sews silk, chiffon, drape, denim, leather. Served me for 3 years in clothing repairs. Paid for itself 20 times. I love it. I like that you can choose a quiet speed - very convenient for sewing thick materials (when, for example, you hem jeans or leather). It’s also convenient to fix the needle in the fabric, for example at a corner when you need to turn it)

Disadvantages: The automatic buttonhole is not the best, I make the buttonhole by hand.

Comment: Regarding skipped stitches, I can only say one thing - different fabrics need different needles and threads and you will be happy, you can read more about the settings on sewing forums (aspen or season for example). Also, some users criticize the overlock stitch, overlock stitch and Processing an edge with an overlocker is a big difference, and you need to immediately understand that not a single household machine will process it, much less cut the edge like an overlocker.
Regarding the extra 5 embroidery pseudo-overlock stitches, I use 3 of them all the time, especially the last 23 - I use it as a finishing stitch on jeans, for example, my friends and customers are delighted.

Raisa b. July 16, 2012 Moscow and Moscow region \Using experience: more than a year

Score 4

Advantages: The price-quality ratio is clearly expressed here. Very good car. I've been using it for 4 years now. It takes chiffon, drape, and knitwear. The stitching is satisfactory and can withstand comparison with industrial stitching. I read a comment about an automatic loop (they say it’s impossible to adjust the uniform covering of the left and right edges), but this happens quite often in industrial machines. In a word, this machine is suitable for both simple housewives and a small workshop with a small area (power) and maneuverability. A very good feature is the “knitted stitch” (half-zigzag). Good selection of paws and accessories. And the most important thing is that any more or less capable dressmaker or seamstress will be able to set it up and make minor repairs.

Disadvantages: Non-adjustable length of knit stitches and some finishing stitches. But in my opinion, this is not regulated in other sewing machines, and of different brands. And yet it is inconvenient. Of course, slow speed (with the maximum selected). But the most important thing is that I can’t buy good quality needles for knitwear! The “native” (included) needle takes any type of knitwear, but the purchased one does NOT!

Valentina K. March 29, 2012, Moscow and Moscow region \Using experience: more than a year

Rating 5

Advantages: Ease of use. Takes thin, thick, knitted fabrics. It works quietly, does not vibrate, and is powerful.

Disadvantages: I don’t get a very beautiful loop, the density of the covering is different, there is balancing, but I couldn’t adjust it. I talked on specialized forums - many people have this problem.
With knitted stitches, when setting the stitch width, the pitch is set automatically, sometimes this is not very convenient.

Comment: Today I happened to sew on a simple Brother and I fell in love with my machine with triple the force. Everything that seemed self-evident - an even stitch without breaks or loops, the presence of decorative and knitted stitches, low volume during operation, ease of threading the bobbin, ease when passing through thick areas, smooth speed adjustment, etc. - all turned into undoubted advantages.
I sew both knitwear on my machine, without an overlocker, and both thin and thick fabrics.

The product you purchased is a branded product, manufactured with high precision and to the highest standards. modern technologies. The product and its packaging comply with all the requirements of the technical regulations (technical regulations) of the Customs Union.

For your convenience and to avoid damage, please read the user manual before starting work.

For additional accessories, needles, paws, etc., ask at retail stores.

General provisions:

1) The warranty period begins from the date of sale to the final buyer.

2) The warranty period is determined by the manufacturer and is indicated in the information sheet, which is part of the instructions. The manufacturer provides all consumer rights related to the warranty in accordance with the laws of the country where the goods are sold. The retailer, at its discretion, may extend the warranty period for the product. In this case, all costs for additional warranty service are borne by the seller.

3) The product is intended only for household use. If there are traces of commercial use (cooperatives, factories, studios, courses, etc., as well as in individual labor or private entrepreneurial activities, educational and production processes), the machine is removed from the warranty and is not subject to free service during the warranty period.

4) Faulty components and assemblies are repaired free of charge or replaced with new ones during the warranty period. The decision on the advisability of replacing or repairing them remains with the Service Department. Replaced parts become the property of the Service Department.

Conditions for obtaining a guarantee:

5) The warranty card is valid if the following are correctly and legibly indicated: model, serial number of the product, date of sale, clear seals of the selling company, signature of the buyer. The model and serial number on the product must match those indicated on the warranty card. If these conditions are violated and the data specified in the warranty card is changed, erased or overwritten, the warranty card is invalid. If the date of sale cannot be determined, in accordance with the Law “On Protection of Consumer Rights”, the warranty period is calculated from the date of manufacture of the product.

This warranty does not apply to:

1) For damaged products:

due to operation not in accordance with the instructions, careless handling of the product, in cases of flooding, falling, impact and other external influences;
in case of modification and repair of the product made by unauthorized persons;
from exposure to or ingress of moisture, sand, dust, aggressive environments, as well as insects, rodents, domestic animals, etc.;
in case of force majeure (fire, natural disaster, etc.).

2) The warranty does not cover defects and wear for sewing machines and overlockers - needles, needle plates, drive belt, feed dog, bobbin holder, adapter, needle holder, needle bar, needle threader, overlock knives, presser feet, spool holders, light bulbs, loopers, etc. . P.

Manufacturer's warranty does not include:

1) Current Maintenance, installation and configuration of the product.

2) Service at the owner’s home.

3) Cleaning (lubrication) and other maintenance of the mechanism in accordance with the instructions is the responsibility of the owner. If the maintenance conditions are not met, at the discretion of the Service Department, the warranty may be removed from the machine.

Rating 5

Disadvantages: No

Comment: Excellent model. Sews everything! From thin curtains to leather and synthetic belts. Record - 4 layers of belt + 2 layers of synthetics.

Pasha N. September 15, 2015, Arkhangelsk

Rating 5

Advantages: high-quality stitches on different types of fabrics, not noisy, hard case

Disadvantages: I haven’t found any in 4 years of active use.

Rating 5

Disadvantages: It is inconvenient that to reverse you have to hold the button continuously. There is no way to hold the fabric with your hands at this moment. But this may be due to my inexperience.

Comment: At first I wanted a more expensive model, but after reading a lot of positive reviews about this hard worker, I bought it. And I never regretted it.

Olga and. June 23, 2013, Tomsk \Using experience: several months

Rating 5

Disadvantages: The automatic buttonhole is not the best, I make the buttonhole by hand.

Raisa b. July 16, 2012 Moscow and Moscow region \Using experience: more than a year

Score 4

Valentina K. March 29, 2012, Moscow and Moscow region \Using experience: more than a year

Rating 5

Advantages: Ease of use. Takes thin, thick, knitted fabrics. It works quietly, does not vibrate, and is powerful.

Sewing machine in household either reality or the dream of every woman, even if sewing things with her own hands is not her hobby. In any family there is a lot of simple work with fabrics that you absolutely don’t want to do by hand, because sewing on a machine is much faster and of better quality. In the old days, an old “Singer” or “Podolskaya” was cherished as the apple of one’s eye and passed on by inheritance. Now purchasing this equipment is not a problem; the only difficulty is choosing a model. We present to you the Janome My Excel W23U sewing machine, reviews of which place it in the first row among many models. The company that produces these products, Janom, has many years of experience and uses the latest technologies for their production.

Introductory review

Computer-controlled machines have a microprocessor, so their capabilities are much wider than those of simple electromechanical ones. Only computerized machines can perform many decorative stitches and complex operations.

W23U has good combination functionality and low price at good quality sewing The list of its capabilities includes many operations: an optimal set of stitches with a total of 23, including several decorative, overlock, and also for sewing knitwear; automatic buttonhole sewing; devices for sewing zippers and buttons.

The power of this model is sufficient to work with any type of fabric, from thin, airy fabrics to dense, heavy materials.

Janome W23U: Feature Specifications

The Janom machine has smooth speed control, needle positioning, an electronic needle piercing force stabilizer, and a needle threader. The working needle is controlled by a built-in microprocessor, which significantly reduces the need to control the stitching. The presser foot pressure regulator changes the pressing force of the layers of fabric, which allows, if necessary, to set it to the desired position depending on the thickness of the layer. For example, when sewing thick fabrics, as well as when sewing curved seams with a smooth turn, the presser foot should be loosened. The presence of a regulator makes it easier to work with knitwear, since by reducing the pressure, you can avoid the effect of stretching it. The electronic force stabilizer allows you to sew even thick leather.

The controls are located under the top cover of the Janome W23U. The instructions are located there, so without stopping from work, you can see the width and length of the stitch for a specific operation, as well as select the thread tension and the appropriate presser foot. Maximum stitch width is 6.5 mm. During sewing, the working area is illuminated by a lamp. The spool in the Janome W23U sewing machine is located horizontally, so the threads unwind smoothly, without jerking.

Another function is the “reverse” key. The button is conveniently located; you can easily find it by touch and press it to secure the stitch.

Shuttle device

Computerized machines typically use a horizontal shuttle. This is exactly what is installed in Janome My Excel W23U. This type has a different arrangement and design from the vertical shuttle. It is installed horizontally under the needle plate, and since it is not covered by the bobbin case, it is within sight. It is convenient for the seamstress to control the color of the thread and its residue on the bobbin.

The horizontal shuttle does not need lubrication, the thread in the spool does not twist (vertical ones have this disadvantage). It does not skip stitches when sewing. The horizontal position of the shuttle provides easy access to the bobbin and easy threading.

The disadvantage of a horizontal shuttle could be the difficulty of adjusting the tension of the lower thread, but in practice this operation is used very rarely; usually it is enough to adjust the tension of the upper thread.

Let's take a closer look at some positive features cars.

Automatic buttonhole sewing, free sleeve

The Janome W23U sewing machine allows you to perform functions such as sewing buttonholes automatically in just one step. The size of the button is determined by a device with a special foot, so you don’t have to measure the length of the buttonhole yourself. Another useful feature, the so-called “free sleeve”, is necessary for convenience when processing sleeves and any narrow products.

Needle switching function

Switching the needle up or down is sometimes necessary when changing the direction of the seam, in particular at the corners of the parts being sewn. By pressing the button, you can fix the lower position of the needle in the fabric when stopping sewing. After turning the product, press the button again. The needle will return to the up position.

Sewing speed limit

If you need to reduce the sewing speed, just use the regulator to set the desired maximum limit. After this, regardless of the pressure on the pedal, it will not exceed the specified value.

Equipment

Under the lid there is an organizer for storing accessories: a set of needles, presser feet, spool pins, bobbins, etc. Included with the Janome My Excel W23U machine, the buyer receives:

Seam ripper.
wide (C), standard, for sewing in a zipper, for blind stitching, for hemming 2 mm, for automatic buttonholes.
Ruler-guide.
Fabric guide for quilting.
Set of needles.
Screwdriver.
Cleaning brush.
Plastic bobbins 4 pcs.
Hard case for the machine.

Possible faults

Janome W23U sewing machines like all Japanese ones Appliances, high quality and reliable. Nevertheless, breakdowns sometimes occur. Most often, the reason for such trouble is the lack of proper care or careless performance of work. Even the most advanced equipment can refuse to work if it is not provided with the correct operating conditions.

If you know the basic principles, you can try to fix minor problems with the machine yourself. However, it should be taken into account that the technical design of the Janome W23U sewing machine has its own characteristics, so some breakdowns and failures may be atypical, as with most machines of other brands. This is due to the fact that in the manufacture of its equipment, the Janome concern uses advanced technologies, providing almost complete sewing automation.

So, some problems:

The needle does not catch the shuttle thread, the seam does not work. The reason is the mismatch between the needle mechanism and the shuttle. The mechanism needs to be adjusted by a specialist.
The speed slowed down and the noise increased. A switch that limits the speed may have been accidentally pressed. You should put it in the right position.
When sewing, loops are formed at the bottom. The reason is that the upper thread is not threaded correctly. Most likely the thread is not passing through the thread take-up. You need to raise the foot, turn the flywheel manually, when the thread take-up is in the upper position, pass the thread through it. If the thread is fine, it may be because there are burrs on the needle plate or hook.
Needles break. Occurs when the needle hits the needle plate, or when the thickness of the needle does not match the thickness of the thread or the density of the fabric.
If you hear a knocking sound when sewing thick fabrics, you should check whether the needle is dull. Perhaps the needle is of the wrong thickness and does not push the fabric fibers apart, but pierces them. Hence the knock. To fix it, just replace the needle.
Due to power surges in the network, wires or windings in the motor may burn out. If there is a smell of burnt wiring, you should send the machine for repair.
If the engine does not turn on, but it does not, the electronic control unit may have failed. Its replacement can only be performed by specialists who understand the complex electronics of the Janome W23U machine. The price of spare parts is determined in each specific case depending on the breakdown.

Caring for Janom sewing machines

Any sewing machine requires maintenance, first of all, regular cleaning and lubrication, otherwise “surprises” will begin in the form of noise, skipped stitches, uneven stitching, etc. Cleaning should begin by removing the hook. The rubbing surfaces are cleaned from dust, lint and fabric fibers with a special brush. Then they are lubricated. In addition, oil is poured into the technological holes, the location of which is indicated in the instructions. At the same time, you need to remember that excessive lubrication does not benefit the machine, but is fraught with the opposite effect. Excess lubricant is wiped off with a dry cloth, after which the shuttle is installed in place. The machine can only be stored in dry, heated rooms.

Sewing machines Janome My Excel W23U: price, reviews

Based on customer reviews, we can conclude that the presented sewing machine is characterized by them as convenient and reliable. Almost all owners of this modern functional equipment are inclined to this opinion. The main criteria by which such an indispensable assistant is evaluated:

Ease of Management;
reliability;
availability of functions necessary for everyday needs and hobbies;
modern design;
ergonomics;
average price category.

The appearance of the device is above all praise, and the presence of instructions on the panel and buttons is another plus that the sewing machine has earned from its owners. Janome machine W23U. Reviews confirm what to have before your eyes practical guide much more convenient than flipping through the instructions in search of the necessary information.

Despite all its undoubted advantages, its price is not too high. You can purchase a Janom machine both in chain stores and via the Internet for an amount of 7,000 rubles and more. Often, the cost of similar models does not depend on the differences between them, but solely on the place of purchase. However, it is preferable to purchase a machine “in real life”, then there is an opportunity to test it in operation, as they say, without “leaving the cash register”.