Coffee table IR was an integral attribute Soviet kits upholstered furniture. According to the plan, such a set necessarily included a sofa, a couple of armchairs and, in fact, a table. The times of the Union of the Indestructible have long since sunk into oblivion, but the coffee table is still in demand. Of course, it can be used not only for storing magazines and other periodicals, but also, for example, for serving a romantic dinner, for handicrafts and other necessary little things. He will successfully play the role bedside table or stands for pots or vases of flowers. In general, this piece of furniture will be needed both in the living room and in the bedroom. Modern shops furniture is ready to offer many options for such tables, but real craftsmen can create their own exclusive option. This is also a way to save money, and sometimes an opportunity to extend the life of some things if you make it from scrap materials. In this article we will look at how to make a coffee table with your own hands and what you will need for this.
The simplest and most common material for making this interior element is, of course, wood. In addition, wood is perhaps the most affordable and easy-to-work material. With the help of the tools that every self-respecting man has in his arsenal, any board can become a coffee table.
Wooden coffee table - an imperishable classic
In order to make such a table-bench with your own hands you will need following materials(all dimensions are in cm) and tools:
- boards 2.5×7.5 (3 pcs.);
- boards 2.5×10 (1 pc.);
- boards 2.5x5 (8 pcs.);
- legs of the required length (4 pcs.), fastenings for them;
- screws - 3.5;
- self-tapping screws - 3;
- finishing nails - 3.75;
- glue for carpentry;
- putty, paint, primer;
- sandpaper;
- saw;
- drill;
- a pair of short and long clamps;
- roulette;
- hammer;
- Kreg Jig for hidden holes;
- sander
Everything is prepared, then let's start manufacturing:
- The ends of two 2.5×7.5 boards sawn along the length of the table must be cut at an angle of 45º. And cut 2.5x5 boards with a length equal to the length of the previous boards along the internal cut.
- Place the pieces, aligning their edges, and measure the width of the table. Next, you need to cut two parts equal to the required width from a 2.5×10 board. Secure with self-tapping screws to each board.
- Make hidden holes at the ends of the crossbars. Later they will help to fasten the products with the sides.
- Use wood clamps to secure the side boards, aligning the ends, and attach with screws into the drilled countersunk holes.
- Following details − end boards Cut out the 2.5×7.5 carefully, you may need to adjust the blanks, so make them a little longer, and then gradually grind off the excess. Glue the finished ends using wood glue and secure with a belt until dry.
- Sand the surface thoroughly finished product. If necessary, apply putty to the joints of the boards, let it dry and sand again.
- Apply paint or stain and varnish (whatever you prefer).
- Screw on the leg mounts and screw in the legs themselves.
A handmade wooden coffee table is ready to delight you with its versatility. It can be used both as a table and as a bench.
Wooden coffee tables can be round. Let's figure out how to make such a round coffee table with your own hands. To make it you will definitely need:
- boards;
- screws;
- wood glue;
- protective agent for wooden products;
- paint, stain, varnish;
- drill;
- jigsaw;
- level;
- roulette;
- Miter saw;
- clamp clamps.
You can make a drawing for a coffee table yourself, there is nothing complicated about it. When the diagram with the dimensions you need is ready, you can start working.
Action plan:
- First, make a support. Here you need to act as your imagination and level of skill suggest. It should look something like the picture. To hold the support parts together, it is best to drill hidden holes using a Kreg Jig, secure with screws, and cover the holes with plugs.
- The support must be sanded and then treated protective agent and paint or stain.
- To make the top of such a coffee table with your own hands, the boards should be cut into parts equal to its diameter. Lay out, leveling the edges and surface (you can’t do without a level here). Glue with glue and secure the structure with clamps until completely dry.
- From the resulting square blank, using a special curved cutting machine, you can cut a perfectly round tabletop. A simple carpenter is unlikely to have such equipment; a company specializing in furniture manufacturing can help here. If you decide to do this operation yourself, you will have to try. To begin, mark a circle of the required diameter on the workpiece. Then secure the circular cut guide with a nail in the center of the marked circle and make the cut.
- The tabletop, like the base, should be carefully sanded, especially its edge, then treated with an antiseptic and painted (varnished).
If you wish, you can use stencils to apply a design, for example a dial, as in the photo, or maybe something else. It all depends on your imagination. Such homemade table will decorate any interior, even the most sophisticated one.
Coffee table made from pallets
Construction pallets are very versatile construction material. If you wish, you can use them to make many useful, comfortable, and most importantly, exclusive pieces of furniture.
DIY coffee table made from pallets - simply quickly unforgettable
If you have already had thoughts about how to make a coffee table from construction pallets with your own hands, we will help you to realize them. For this we need the actual pallets and regular set tools and materials for working with wooden products, namely:
- hacksaw or jigsaw;
- sanding machine or sandpaper;
- drill;
- screws;
- wood antiseptic;
- paint, stain, varnish (at your discretion).
Operating procedure:
- To make a table from pallets, first select suitable material. Select pallets carefully. The boards should not have large knots, as well as mold and signs of destruction. It is best to disassemble the pallet into planks before starting work. Clean each of them, then saw off the necessary part, sand it and coat it with an antiseptic. You can paint it right away, it will be much more convenient, because in assembled form It will be impossible to get into some places. Then tighten with screws necessary design and finally varnish.
- It is best to make such a table on wheels. For this you can use furniture wheels, and better wheels for trolleys. The latter are more reliable, and their appearance is more suitable.
- Another option is to make small legs for such a table from small bars, and the surface of the table can be covered with durable glass of the required size.
Your DIY pallet table is ready. As it turns out, you can create an exceptional thing by spending very little time, and most importantly, money. But construction pallets are not the only available material from which you can make a small coffee table. For example, standard wooden boxes will cope well with this task.
This handmade coffee table will serve you faithfully for a long time, if you approach the issue of its creation seriously, despite all its apparent simplicity.
It would be advisable to make a table from a log or a picturesque stump, for example. It will decorate the interior in country style. It can be on wheels and have a tabletop unusual shape made of durable glass.
Folding coffee table, how to make
We all want to save more free space in the apartment. An abundance of furniture cluttering up all available space has long been unwelcome. However, having little furniture is also not the ultimate dream. There is only one way out - interior items that easily perform several functions. This is what a transformer table is. When folded it small size and plays the role of a cabinet or coffee table, and when disassembled it is a full-fledged dinner table, which will help you host guests or arrange a family dinner. How to make such a transformer with your own hands?
Computer programs will help you create drawings of such a table. With their help, you can calculate all the nuances.
The best material for creating a transformer is laminated chipboard.
Buy responsibly necessary accessories. The durability of the mechanism, and, consequently, the table as a whole depends on it. Mechanisms for folding tables can be purchased in the store.
Thus, when unfolded, this table is very stable and can easily become a dining table.
100 examples of coffee tables
Now you know that you can easily make a small coffee table yourself. At your request, it will be foldable or non-collapsible, on legs or on wheels, in the color of wood or painted. Imagine, try, and your interior will be unforgettable for little money.
Making furniture at home, not on a production scale, is not a complicated process. Minimal skills in handling a hammer, a hacksaw, a tape measure and a screwdriver are sufficient.
But before you make a coffee table with your own hands, you need to stock up on materials, study various schemes assemblies, sketches and drawings. If you have some imagination, furniture can be made from any unnecessary trash collecting dust in the garage or attic.
Equipment
In the process of making a coffee table you will need tools and Consumables. And also various photos, sketches, drawings or just ideas about what you can create with your own hands from scrap materials.
To make a table you will need:
- Hammer;
- Self-tapping screws and nails for wood;
- Hacksaw,
- Jigsaw (for decorative carvings or cutting workpieces of the required length at a certain angle)
- Glue;
- Screwdriver;
- Primer;
- Varnish or stain;
- Various finishing materials for decoration.
Before actually making a coffee table, you need to decide what it will be made of.
Material
In principle, a coffee table can be made from any unnecessary, but not shabby, trash, of any design. Old, but fairly durable (not corroded by bugs and mold) furniture. It all depends on your imagination and what you have at hand.
Most often, such a piece of furniture is made of wood, metal, plastic, tempered (non-fragile) glass. But you can also convert the dining table into a coffee table. Disassemble old wardrobe, sideboard or buffet for spare parts and make something out of them. The wheels can be taken from an old baby stroller.
How the process of manufacturing and assembling the table will proceed will be influenced solely by enthusiasm and the available material at hand (or feet).
Options
Looking at various diagrams, drawings of coffee tables by various craftsmen who are creating their masterpieces in World Wide Web, we can come to the conclusion that the most optimal and cheapest option is to make it from wood. For example, the same pallets, saw cuts, boards, logs and logs.
A coffee table made from:
- Pallets;
- Radiator;
- Old window blocks;
- An out-of-date entrance door;
- Wardrobe;
- Chest of drawers;
- Boxes;
- Polenyev;
- Glass;
- Reels from under cable bays;
- Old chests and suitcases.
Step-by-step instruction
Let's make an original transforming coffee table from pallets. Let's look at the entire manufacturing and assembly process step by step. To do this, we need a durable pallet that is not rotten, without mold and cracks and crevices.
When such an item is found, we begin making the coffee table:
Decorating a coffee table
When the furniture is made and assembled, it needs to be brought to perfection and given an aesthetic appearance. At the same time, it is better to apply the design on a smooth, well-treated (polished) surface, and appliqués and other overlays on a rough, non-uniform surface.
Before you make a coffee table for dolls for your child, you need to choose one finishing material so that the child does not tear it off at the first opportunity and its scraps do not subsequently lie around the room.
When it comes to decor, there are a lot of ideas. Let's look at some of them:
- On wooden tabletop artistic carvings look good, on glass there are fragments laid out and fastened with glue in the form of a mosaic or a chessboard;
- The more relief, unusual elements, the better (carving, engraving, various “artistic disgrace”);
- To upholster the side surfaces, you can use fabric, ribbons, lace with tassels (make an imitation of a tablecloth);
- You can also decorate with coarse fabric such as a mat or from an old coat;
- Metal corners set with glue will perfectly emphasize the brutality of the coffee table;
- With the help of stain, wood can be aged, giving the furniture an unusual look;
- All smooth, sliding surfaces can be intentionally “roughened” by burning various patterns and lines onto the surface.
A handmade coffee table can be a home decoration. Made with sufficient quality, it will carry not only aesthetic, but also practical functions. Delight the eyes of owners and guests and last for many years.
Photo instructions on how to make a coffee table
Furniture making with my own hands- not only a way to save money, but also a fun activity. You can bring your wildest ideas to life, for example, creating a coffee table. After all, this is not only a stylish accent in the interior, but also a functional element of the room.
The procedure for making a table at home is as follows:
- We take a beam with a cross-section of 5x10 cm, cut it into three parts, several pieces each. For example: the length of the first part is 130 cm, it is necessary to cut 9 pieces of beams with this length. The length of the second part is 21 cm - 12 pieces. The length of the third part is 34 cm - 2 pieces. You can start by making a drawing of the table.
- The timber is placed in three rows. At this stage, you need to leave a small gap so that you can place the table legs there later.
- Remove two rows from the top. We begin to move the rest of the timber. This will give the table an original appearance. Then we make markings for the transverse parts.
- We lay the outer bars of the second row and put marks for the cuts. The cuts can be made with a hacksaw or saw. After which we secure the bars with screws.
- Let's move on to the third row. We shift the parts a little and secure them.
- Empty spaces appeared under the tabletop. They are for feet.
- The table needs to be processed protective composition.
Original coffee tables
Every person wants to have in their apartment unusual table so that it fits into the interior of the room and pleases the eye. This piece of furniture can be made from any material: wood, chipboard, drawers, etc. Let's look at several of these options.
Table made from waste paper
If there are old magazines and newspapers in the house, there is no need to rush to throw them away - perhaps they will serve you as material for the table. True, the interior design must be appropriate. By making furniture in this way, you can choose the table height you need and is comfortable for you. Process making a table from old newspapers and magazines height:
- We take waste paper and roll it into a tube, securing it with money rubber bands.
- We dilute the water-polymer emulsion. And put the rolled paper in it for 2-7 minutes.
- Then we dry the paper.
- We glue the bunch of cabinets with glue, you can use PVA. Dry it in a vertical position, securing it with thread in advance.
- We mark the strips and cut them.
- We glue the glass tabletop. The glass should be 12 mm thick.
Gallery: coffee table (25 photos)
Stylish table made of logs
This method is more complex in terms of execution than the previous one. The main elements for creating a table will be logs. It is taken as a basis wooden box, preferably on wheels. After which it must be furnished with logs. A homemade surface planer is also used for marking. After sawing off all unnecessary elements, there is no need to throw away the sawdust. It is better to collect them in any pallet. After this, the round pieces are glued to the surface. Sawdust must be mixed liquid nails. The mixture should resemble plasticine. Using a spatula, it is necessary to rub all the cracks between the rounds. Then, the product must be removed from all sawings and dirt, sanded and varnished.
DIY coffee table (video)
Creative curved table
Make a table like this It will be difficult on your own, but still possible. The main thing is to follow the manufacturing rules. For the design you need to take any type of wood. You choose the height yourself. The basis is taken from the property of wood, such as softening during dry heating. After which the form is saved. More details about production:
This table option is for those who love functionality and beauty in one item. With the help of simple manipulations he able to change height and appearance.
When assembled, it is a regular table for various waste paper. One has only to lift the two sides with legs, and it changes its usual size and turns into a dining room one.
Another transforming system is based on metal frames-pedestals. They are attached to the tabletop. In their usual position, that is, when assembled, they lie horizontally; if you change the size, the lid rises and rotates on hinges and becomes vertical.
When unfolded, the size of the structure is 73 cm. This height is acceptable for a computer desk. Before making a transformer, you need to make a drawing.
DIY coffee table
To make a coffee table you need to take a sheet of chipboard. Its thickness is 16 mm. Make markings: find the center at the intersection of two diagonals. A nail is driven into the center, to which a thread and a pencil are tied. With its help you can draw a circle. If you want to make a table of a different shape, then draw the bends. After this, the shape is cut out using a jigsaw. The edges must be sanded.
The legs of the table are attached with screws. Paint the countertop itself in the color you want.
Table on wheels
If you have never made tables with your own hands, then you can try the simplest option. Let's consider making a model from chipboard. To make it you do not need a lot of knowledge and skills and expensive materials.
You can order cutting of laminated chipboard.
To make the structure you will need: a table top, planks, a shelf, a bottom, wheels, plastic corners, self-tapping screws, confirmations. When all necessary materials Yes, you can start assembling:
- First you need to make a shelf.
- Connect the tabletop and planks to plastic corners. The result is vertical slats to which you need to attach the shelf using a confirmant. To make her hold on tighter. the same must be done with the bottom.
- We attach the wheels using screws.
- At the very end, you need to seal the attachment points using self-adhesives.
As we have already found out, making a coffee table at home is not difficult. The article presents options that everyone can handle. Over time, you will be able to create the most original designs.
The height of a coffee table according to GOST should not exceed 50 cm, but no one forbids adjusting it to suit yourself. For example, the height of the transformer can be 73 cm. It is also worth noting that the table should fit your interior. Self-production Making such a piece of furniture is a fascinating process that will also save you money. A little imagination - and you already have an original product ready.
Making furniture with your own hands is not only a great way to save money, but also an opportunity to put your creative potential into practice!
We will talk about making coffee tables with your own hands. There is no such thing as too many side tables. They can be placed next to the sofa to place a vase of flowers or a mug of tea, used as a bedside table or as a stand for potted indoor plants. However, monotonous wooden tables are unlikely to liven up a dull interior. I want something stylish and unexpected...
Stylish table made of wooden slats with your own hands
This bench can serve as a coffee table, extra seating or storage space indoor plants. This piece of furniture will “fit” well into almost any interior!
DIY coffee table photo
Materials:
Tools:
Step one: Using a hacksaw, cut the ends of two 2.5 x 7.5 cm boards at a 45 degree angle. Cut out fragments from 2.5x5 cm bars, the length of which will correspond to the internal length of 2.5x7.5 cm blanks.
how to make a coffee table with your own hands. Photo
Step two: Place 2.5x5 cm of the workpiece in the middle, and 2.5x7.5 cm on the edges. Make sure the ends of the inner slats are aligned.
Step three: Measure the distance between the outermost 2.5x7.5 cm bars and cut two pieces of this length from 2.5x10 cm boards. They will serve as lower supports for the bench. Secure them by screwing self-tapping screws into each longitudinal rail.
Step four: Using a Kreg Jig, drill two pocket holes at each end of the support crossbars. These holes will be used to connect to the 2.5 x 7.5 cm edge bars.
Tip: It is difficult to give specific recommendations regarding how far from the edge to attach a Kreg Jig. This depends on the length of the screws used, the exact thickness of the board, etc. We advise you to first practice on unnecessary scraps of boards.
unusual coffee table with your own hands. Photo
Step five: Place 2.5x7.5 cm blanks along the edges of the structure. After making sure that their ends are at the same level, secure them with clamps.
Tip: If you use soft wood (for example, pine) to make the table, place unnecessary scraps of boards under the clamp supports. Otherwise, marks from the clamps will remain on the wood.
Step six: Securely attach the outer 2.5x7.5 cm bars to the base of the bench by screwing 3.5 cm screws into the countersunk holes that you made a little earlier at the ends of the support crossbars.
coffee table made of wood. Master Class
Step seven: Measure the width of the fabricated base to determine how long you need to cut the 2.5 x 7.5 cm blank for the ends of the bench. We recommend that you make a cut with a small margin in length, and then slowly grind off the excess until you achieve the perfect fit.
Step eight: Wet the ends of all slats with water and apply a large number of Gorilla Glue.
Step nine: Place the end boards in their intended place and secure the entire structure with a belt so that it does not fall apart while the glue is wet. For reliability, you can additionally secure the ends with several finishing nails.
Step ten: Sand the surface of the bench sandpaper 120 grit to eliminate all unevenness at the joints. Fill all gaps in the seams and recesses from nail heads (the latter must be recessed into the wood) with putty. Once the putty is dry, sand the surface again, this time with 220 grit sandpaper.
Step eleven: Paint the bench. We recommend that you sand the surface again using 400 grit sandpaper and water before painting.
Step twelve: Install special mounting plates for attaching legs. When attaching them, make sure that you drill holes in places where there are no screws already screwed in. The distance from the fastening to the edge of the base of the bench should be about 2.5 cm. Screw the legs themselves into the fastenings.
Coffee table made of copper pipes. Master Class
The material for making the next table can perhaps be called the most unexpected. This time we decided to tell you how to make a table with your own hands from... copper pipes OK.
Materials and tools:
The figure below shows all the parts (pipes (A-E) and various connecting elements (F-H)) with their sizes and quantities. All that remains for you is to take it in your hands pipe cutter and sit in front of the TV, which will brighten up the tedious cutting process a little. It's not difficult, just a little boring. 😉
When all the pieces are ready, you can begin assembling the lower part of the table. How to do this is shown in the figure.
Having assembled the lower tier, you can proceed to the upper one. The only parts not listed in the parts list are the four 2.5cm pieces of pipe that fit into the tees at the top of the corner posts. Without these inserts you will not be able to put on decorative caps, because... the latter have the same diameter as the tees.
Reliable connection of the tubes with each other will ensure glue, but we recommend applying it only after preliminary assembly of the structure, i.e. after you make sure that all cut tubes have desired length and fit well together.
Wooden shelves, which you can pre-paint if you wish, are secured using special clamps that are placed on the underside of each board. Now you're ready to decorate your home with a new, handmade table!
DIY lightweight cement table
Countertops and other interior elements made from concrete have become increasingly popular recently. However, for all their attractiveness, they are not without a number of disadvantages. Firstly, pouring large quantities of concrete can sometimes be quite an expensive undertaking. Secondly, if we're talking about about small side tables, another one comes to light serious problem- such furniture turns out to be too heavy. On the one hand, there is a desire to get a good, solid thing, on the other hand, you want to be able to move a table you made with your own hands without the help of professional movers. The solution found can be considered an insight.
Materials and tools:
Step one: Mark and cut out the foam sheet. From a 120x240 cm piece you can cut 18 squares of 40x40 cm. By stacking them on top of each other, you will get a parallelepiped 40x40x45 cm.
DIY foam table. Photo
Step two: Glue the cut pieces together. 3M Super 77 aerosol adhesive is ideal for this. It is better to perform this stage of work outdoors. Don't forget to wear gloves and a long sleeve shirt. Apply an even layer of glue to one side of the first square, then do the same with the second. Wait ~15 seconds, then connect the squares, making sure their edges meet. Repeat this until all the square pieces are joined into one piece. Wait about 30 minutes before moving on to step 3.
Step three: Now the most interesting thing... giving the resulting parallelepiped the outline of the future table. We decided to make a table in the shape of a cylinder. You can come up with something more original or, on the contrary, keep the original block with right angles. Cutting foam is easy and fun. Your design will have a rough, angular appearance at first, but don't worry! Once the table has been given the desired shape, it is time for sanding. Using 36 grit sandpaper will quickly smooth out any rough edges. As you get closer to the ideal, gradually move on to sandpaper with a finer grain size. Do not strive to achieve a super smooth surface; at this stage it is important for you to achieve only the required shape.
Step four: The surface of the future table has been sanded, it’s time to cement it. The first layer, applied over the entire foam mold, will fill in the voids and texture of the foam. You only have ~20 minutes, so work quickly so you have time to smooth out any rough edges. Once the applied cement mortar has dried, you can apply the next layer. The number of coats depends on how smooth and even the final surface you want (usually four to five coats are required). It should be remembered that the smoother the surface of the final layer before it dries, the less sanding it will have to do!
Tip: When cooking cement mortar follow the manufacturer's instructions. You should not prepare more mortar than you need to apply one layer (for example, we used 220 ml of water and 450 g of cement). Make sure you don't forget to cover the surface of your workbench or workshop floor, because this job is quite dirty.
Step five: After the last cement layer has dried, you can sand the surface if desired. We wanted to achieve a glossy finish on at least the top of the table, so we sanded it using varying grit sandpaper ranging from 100 to 2000 grit.
Advice: If you are planning this operation, purchase a protective mask that will help you protect your lungs from cement dust
(Made in this project the table turned out to be very durable and strong, but at the same time it weighed no more than a kilogram.)
DIY stump table
The material for the next table is sometimes literally lying under your feet. Even residents of megacities will be able to find a suitable stump if they wish.
log table. Photo
Materials and tools:
- wooden block;
- white acrylic paint;
- hand grinder;
- chisel;
- hammer;
- decorative upholstery nails;
- molar tape.
Step one: Find a table base! This should not be an old rotten stump, but a freshly cut log. Allow it to dry for at least 6 months (nothing is worse than waiting, but it must be done) until the bark begins to separate from the trunk.
Step two: Using a chisel, use a downward motion to carefully scrape away the bark from the log. If the stump is dry enough, you won't have to use too much force to do this.
Step three: By using grinder With medium-grit sandpaper, sand the surface, removing any remaining bark and smoothing out any sharp corners. Don't forget to sand the surfaces of the lower and upper cuts. Wipe the wood with a damp cloth.
Step four: It's time for painting. We used white semi-gloss paint that included a primer (we needed three coats for full coverage). You can choose a different type and color of paint, focusing solely on your taste. Don't forget to prime the surface of the wood first. Make sure you don't forget to trim the bottom cut.
Step five: Prepare decorative nails. Place a strip of masking tape along the top edge of the side surface of the block, thereby marking the place where the first row of nails will be located.
Step six: Use a hammer to hammer in the first row of decorative nails. To ensure that the distance from them to the top edge is the same throughout the entire “line” of nails, use the strip of masking tape you previously glued as a guide. Once the first row is completed, repeat with the second and third row of nails (we needed almost 150 nails for three rows).
Tip: Cover the bottom surface of the stump with furniture felt so that you can move the table around the room without damaging the flooring.
The work is done. You can enjoy your new piece of furniture and be proud that you made this charming coffee table yourself.
Coffee tables: do it yourself
Wooden table: how to make?
Many people are interested in how to make a wooden table with their own hands to get a model with an original appearance. Let's consider one of the options.
To make an original coffee table with your own hands, you should take timber with a section of 5x10cm. It is cut into pieces of the following lengths: 130cm - 9 pieces, 21cm - 12 pieces, 34cm - 2 pieces.
The prepared timber is placed in three rows, leaving space for attaching the legs.
The top two rows are removed. The timber in the third row is moved slightly to create an interesting appearance. Next, mark the places for attaching the transverse parts.
Lay the outer bars of the second row and mark the places of cuts. Then the cuts are made circular saw or a hacksaw with a chisel.
The bars of the second row are secured with screws.
Lay the third row, move the parts and secure them.
An empty space is formed under the tabletop, in which they fix legs.
The wood is processed protective composition, preserving the wood texture.
Original model of a wooden coffee table with your own hands
First, to make a table with your own hands, prepare planks: 6pcs - 22.5x45cm, 2pcs - 22.5x41cm, 8pcs - 20x4cm, 8pcs - 40x4cm.
Planks 20x4 and 40x4 are glued in pairs. To ensure they stick together securely, they are clampedclamps.
While the leg blanks are drying, assemble box from the remaining parts. They are connected with wood glue and nailer.
Legs They are attached to the box with countersunk screws. Crossbars are placed between the legs at the bottom.
cover for a wooden table they are also made using 22.5x45cm planks. They are glued together, and then the resulting square is sawn into two triangles.
One triangle is secured with screws, and the second triangle is secured with slats so that it is removable.
All parts are sanded and painted.
Stylish coffee table. Master Class
Start making a stylish table with your own hands by marking the sheet Chipboard 16mm thick. The center is found on the sheet at the intersection of two diagonals.
A nail is driven into the center, to which a thin rope or harsh thread is tied.
A pencil is tied to the free end. This allows you to draw a circle.
If you want to make a table with your own hands that is not round, but of a more interesting shape, then the shape of the circle is changed by drawing curves.
The table top is cut out jigsaw or a reciprocating saw.
Edges are processed sandpaper.
Legs secured with screws. If they are located obliquely, then the slope should be outward.
Table surface paint in the desired color.
Simple coffee table
To make a coffee table with your own hands, take boards 40x15cm - 2 pieces and 50x19cm - 2 pieces. In addition, you will need legs and mounting plates.
A larger one is fixed on one of the boards plates for attaching legs. You should step back a little from the edges.
Lateral and top part The table is secured with wood glue.
It dries in about half an hour.
DIY log table
A self-made coffee table with this appearance will decorate your cottage or country house. Work begins by assembling the frame. To do this, take sheets plywood two centimeters thick. A base with dimensions of 60x80cm is cut out of them. A box 68cm long, 45cm wide and 40cm high is attached to the base.
DIY log table. Photo
After this, thirty round pieces are cut logs 45 cm long and twenty-four round cuts, the thickness of which is 3 cm.
The prepared logs are secured around the perimeter of the box. Fixed from below to the base rollers. They are installed at a distance of three centimeters from the edge.
In addition to glue, it would be useful to secure the logs with screws from below.
Installed on the box plywood cover. Round circles are glued onto it. The space between them is filled with wood putty, which does not shrink when dried. Apply it in stages so that the previous layer has time to dry.
After the putty has dried, the surface polished. For this, a surface grinder is used. After this, the log table can be used.
Country style table
If you are interested in how to make a table from wood cuts with your own hands, then you should read the instructions.
They begin making such a coffee table with their own hands by choosing the appropriate material.
Selected slept We inspect for any interesting parts or parts that need to be removed.
Excessively rough, protruding parts are cut off. On the side where the tabletop will be, the surface level.
Used for work cleaver, which moves at an angle of forty-five degrees.
The sides also need to be leveled.
All surfaces polished, using ever-decreasing grain sizes.
Glossy varnish mixed with resin in equal parts.
The resulting composition is applied to the wood in a thick layer. It will take a long time to dry. If cracks appear during the drying process, they must be filled.
Bottom side clearing out. If there are voids in the tree, they are filled with resin gradually until the hole is filled.
If there are air bubbles in the dried resin, the surface is heated with a heat gun or burner.
A second layer of resin is applied and again left to dry for two days. The entire surface of the tabletop should be glossy.
The part of the ax handles is cut off at an angle of 22 degrees. The surface is sanded and painted in the desired color.
Mark places for legs and make holes.
Glue is poured into the holes and the legs are installed. Special pads are attached to each.
White coffee table
Make such a coffee table with your own hands from plywood And glass First, prepare a drawing and determine the dimensions. Then they proceed directly to production.
DIY coffee table. Blueprints
Plywood acts as a tabletop box with partitions, covered with glass on top. Triangular legs are attached to it.
You can make a door at the box to access what's inside, or you can lift the glass.
LegsFor a table with your own hands, it is better to cut it out of fairly thick plywood. It should be remembered that double legs are easier to make than more single ones.
When all the parts are ready, they are assembled together and fastened. The table is painted or varnished.
DIY table made from pallets
If you know how to make a table from pallets with your own hands, you can get interesting option furniture for home. Pallets must first be sanded, sawn into pieces and primed.
table made from pallets. Instructions
A table is assembled from the prepared material. To do this, attach legs or wheels. A pallet directly or a surface assembled from individual planks can be used as a table cover.
After all the parts are connected, the structure needs to be painted or varnished. After this, the table made from pallets is ready.
Second version of a table made from pallets
To make such a table with your own hands, you will need one or two pallets. You should first draw a sketch of the future product, taking into account all dimensions.
The table will have a shelf for small things under the table top. The structure is assembled from prepared parts.
The surface is painted black, but this is not the only possible variant. There are many other decorating possibilities.
Coffee table stand
Option on how to make a table from copper pipes with your own hands, may be of interest to many craftsmen.
The pipes are first marked and cut. Then they are coated epoxy glue and assemble the base for the table.
This base is applied to the board and the fastening points are outlined. In these places you will need to drill holes by pipe diameter.
Four holes are drilled, but not all the way through.
The board is impregnated polyurethane and cover stain.
The remaining one is collected from the pipes frame.
Legs and base cover paint in the color of the tabletop.
Made from a piece of cloth pocket, which is hung on the transverse parts of the legs.
All parts are assembled together, adding epoxy glue for reliability.
DIY marine style table
This table is from an old one window frame looks very romantic. The frame is cleaned of dust. If necessary, replace the glass.
Wooden surface paint white acrylic paint. After drying, the paint layer is sanded so that the wood appears. An option is also available in blue and white.
To make the legs, take stalk and sawed into pieces of 34 cm. After this, it is treated with sandpaper to remove roughness.
The blanks are drilled in four places. Next, each leg is attached to the base, and the base with legs is attached to the frame. All this is done with self-tapping screws.
The legs are covered with coarse rope.
For peeled and low-fat glass glue sea souvenirs and seafood. They must be covered with glass on top, which is cut in the workshop to the size of the frame.
A loop is made at one end of the rope. The rope is glued around the perimeter of the frame, leaving the loop free. When the other end reaches it, an interesting sea knot is tied.
A table is the second item after a stool that every beginning amateur furniture maker should be able to do. The table can be created from different materials and possess unique characteristics. An excellent intention for you would be the desire to make your own product from wood.
A table made of wood is quite easy to create with your own hands; having minimal skills in working with carpentry tools is enough. And the cost of the material will be significantly less than for a table using metal, glass or plastic.
A piece of furniture made with your own hands will most accurately correspond to the wishes of the happy owner, and will be incomparably more pleasing to the eye than what was purchased. And most importantly, when creating a table with your own hands, you acquire important skills in working with the material, which will make the restoration of operational defects much easier.
What can you make a good table from?
Especially beautiful tabletop can be made from cheap non-varietal ones pine boards, knotty and twisted (without falling knots, rot, fungus, wormholes), which, when well processed, give a wonderful pattern, to achieve which when working with expensive wood it is necessary to put in much more expense and effort.
When choosing a material, it is important to take care of the strength of the future product. To do this, you should pay attention to the density of the wood.
Soft wood (spruce, pine, chestnut, dogwood) is easily damaged during use, which negatively affects the durability of the table. But scratches and dents can be hidden, although the restoration process will be quite frequent.
Hardwoods (beech, ash, maple, oak, walnut, fruit trees, elm) are quite difficult to process on your own. And you may have to look for experts to work with them. But you will ensure the durability of the product.
External characteristics
It is very important to determine in advance the appearance of your future product. Basic rule good table it is considered if the design fits well into the space allocated for it and leaves a lot of free space for those sitting.
It is also important to consider that a table with a rectangular top will accommodate less people than a table with a round or oval shape with the same area. And it would be more expedient to make a table for guests in a folding version, which is folded out for big holidays, but in everyday life is folded. Also, such a folding table will be convenient in the utility room.
Most often you need to choose a kitchen table. It should be roomy and pleasing to the eye to facilitate the process of working with it. But it should not interfere with movement in the room and in no way interfere with the process of culinary creativity.
Based on this, it is absolutely clear that the size of the table is selected depending on the area of the room. Also, soft wood cannot be used for a kitchen table due to its use in “extreme” conditions.
Choice external characteristics products are a responsible process, therefore, before starting to create a table for the garden with your own hands, it is extremely necessary to thoughtfully assess the needs for which this table is being made.
Transferring an idea to paper
When creating a design that is the fruit of your imagination, you will have to develop the diagram and drawings of your table yourself. Why are there so many electronic programs?
After a thorough development process, it is extremely important to transfer the resulting result to paper. For fast and high-quality work, it is very important to use this manual constantly.
Creative process
Preparation of drawings is the last preparatory stage. Next, you can begin the most important part of the work - manufacturing the parts. Wooden tables It is much easier to create with your own hands if the drawings and diagrams are as informative as possible. This reduces the likelihood of errors to a minimum.
You can actually do it yourself like this: desk, and magazine or children's version. With a certain skill it is possible to create and computer desk. As well as a dining or country model. Each of the options is quite easy to implement.
The canvas for the tabletop and the boards with beams from which the remaining parts will be formed are processed with the available tool or, at worst, with coarse sandpaper to remove any defects present in the form of unevenness and protruding knots.
The boards are sanded on all sides, including the side edges and corners. If you are creating a canvas from wood cuts, you need to make sure that they are sufficiently dry, and also repair small cracks discovered after a visual inspection. And it’s better to tongue and groove them. To get more reliable adhesion of the canvas and save time on assembling elements.
Transfer the diagram to the finished canvas. The main elements are cut out with a jigsaw and, if necessary, the sections are polished. Protruding support elements are cut off by approximately 3 centimeters. Horizontal cuts are made on both sides of the supports (legs).
The blanks are coated with a preparation that prevents the entry of moisture and pests, and only after final drying is it possible to resume the process of creating a table with your own hands.
Putting the details together
After making all necessary details you can begin the ritual. Namely, to put together the desired masterpiece. And it could be like round table, as well as any other selected product.
First, you need to assemble the supporting structure using screws and glue (first, thin channels are drilled with a drill to the length of the screw, otherwise there is a possibility of the part splitting). Galvanized screws can be used for connections, as they do not rust, and this is very important for wood products. Or wood glue.
According to the basic rules, the length and width of the frame should be 30-25 cm less than the tabletop.
Additional boards need to be attached to the sides to add rigidity and to hide the place where the legs are attached. Cut chamfers where the legs are installed.
Then the table leg is secured in place with clamps, and holes for the bolts are drilled in the frame. Place the supporting elements in place and secure them with stoppers. Reinforce the structure with wood glue. Then install the tabletop in place for which furniture corners are used. At the very end, all visible screws are hidden with plugs matching the color of the wood.
The final stage. Finishing
A photo of the completed table can be seen below. Achieving this result is surprisingly easy. If desired, you can round either only the corners or the entire end, depending on the type of table. It will be nice to make chamfers on the edges of the tabletop.
Irregularities in the entire structure are sanded down, and mistakes made are hidden using putty. To extend service life with your own hands assembled table it is necessary to cover it with several layers of varnish or stain.
Thus, do it yourself beautiful table made of wood is a fairly simple leisure activity. And easy to do. The guarantee of obtaining a high-quality, ideal in dimensions and aesthetic result according to your drawings is: strict adherence to the instructions, error-free execution and carefully selected material. And the resulting table will harmoniously fit into the exterior.
Photos of tables with your own hands
