Improving Fiat Doblo and Ducato are useful improvements to Italian cars. Improving Fiat Doblo and Ducato - useful improvements to Italian cars Soundproofing the Doblo interior - what you need for work

Modernization of serial vehicles can be divided into two main types: technical tuning and external styling. In the ObvesMag store you can buy accessories for Fiat Doblo 2001-2015, which will help make the car as convenient as possible. All drivers will be pleased not so much to stand out from others as to receive easy-to-use devices. Buy tuning from the main Russian and foreign companies, and you can enjoy the amazing and bright appearance of this car any day.

There is a huge variety of tuning products available now for Fiat Doblo 2010-2014, and sometimes people ask: what to look for first? Our store can offer you to first buy something without which using a vehicle cannot be very pleasant and easy. It is very necessary to buy car mats for the interior of each car, which will help avoid dampness and moisture penetration. Not only is there a risk of rust developing in the car, but there is also a risk of electrical wiring failure, which is even worse.

Another type of important modification is the purchase of visors for the windows and hood. Such tuning will protect the Fiat Doblo 2011-2013 from wind and chips. In ObvesMaga presented a large number of different deflectors of all shapes and sizes. Including deflectors with chrome moldings: these accessories perfectly highlight the body line.

Installation of body kit in Moscow

A special area of ​​Fiat Doblo 1 tuning that our store sells is the implementation of an iron body kit and stainless steel sills. Such running boards can help with landing and make the operation of SUVs more comfortable. Without thresholds, it will be difficult for children and older people not to get their clothes and shoes dirty; with them it is more convenient to clean the roof of snow or install bicycle racks.

A practical metal body kit allows you to save the plastic and fenders of the car from contact with neighbors in the parking lot and from other troubles. Various small collisions will pass by thanks to the reliable assembly and of stainless steel. Similar tuning for Doblo 1 is recommended when driving on bad roads or in a dense metropolis with a huge number of vehicles.

At ObvesMag we have collected great amount accessories for tuning the interior and exterior of a car. Various covers for mirrors and exhaust pipes. Each such accessory will make appearance modern car more stylish and dynamic. You can install all the tuning yourself or in our car service upon purchase. We deliver tuning products throughout Moscow by courier or throughout Russia transport company: It's short-lived and inexpensive.

I don’t know if I chose the right section, but I decided that this topic would be appropriate here. I invite everyone to share their HOME MADE experience here...
I myself want to share with my classmates my experience of building a homemade, mobile camping refrigerator. A very necessary thing, for trips to nature and to the sea, of course.
This year we will definitely go to the sea. It is better to keep the “brake” and drinks in the cold to prevent them from spoiling. And for this you need a refrigerator. Buy a car refrigerator from a cigarette lighter for 4,500 rubles. “toad” doesn’t give me any. Therefore, also for old car, it was decided to make a new, major refrigerator with “cold accumulators” in the form of frozen one and a half cups of water. Old refrigerator made from packaging cardboard, it lasted 3 trips to the south, and was mercilessly thrown into the trash (I attached a photo below (not the trash, but the refrigerator)).
So, what was done and how. The size of the refrigerator was chosen 400*400*300 mm, based on the size of the trunk in the previous car (too large would take up a lot of space and there would be nowhere to put things).
I decided to insulate, or rather thermally insulate, using foam insulation with foil on one side, 10 mm thick. Width 1.2 m, length 1 m. Price today is 90 rubles/1 m.

The body material was waste from our furniture production– MDF (or, to be clearer, fiberboard) 10 mm thick. Purchased 2 aluminum corners 15*15 mm for 120 rubles. for both. Also purchased were rivets 4*16 (100 pcs. – 50 RUR) and 2 furniture bar hinges for 30 RUR. each. That's all the expenses - 295 rubles. Tools and equipment were borrowed from work (where the refrigerator was assembled).


Cutting off the corners in place, we slowly begin to assemble the box of the future refrigerator.


As a result of the “titanic” labors we got this nice little box.


I installed a snap lock and a folding wire handle on the lid of the box. So that the finished refrigerator along with packaged food can be carried in your hand. Otherwise, full of water and food, it becomes very heavy! But, as they say, you don’t carry your own burden...

Now we proceed to pasting the inside of the box with insulation. I decided that the bottom and lid would be covered with 2 layers of insulation, and the walls with 1 layer. I used liquid nails for gluing. Having smeared the insulation blank with “nails,” I glued it to the wall and pressed it down with a weight. It stuck well, but then I tried to tear it off, but the glued seal didn’t budge.


As a result, after 3 days of working in my free time from my main job (of which there is not so much), I got this nice refrigerator with a hinged top lid with a latch.


4 and a half will be fixed or placed in the corners or on the bottom liter bottles with water, or 6-8 half-liters, previously frozen in the freezer. Can be used mineral water, cold, but with gas, in the heat it’s so invigorating. It is better to take half-liter mineral water, this volume is the most practical. Bottles are not filled with water full, otherwise, when the water freezes, the ice will expand and tear the bottle, and the food will float in the thawed water. To save space in the refrigerator, you can buy a branded “cold accumulator” in the store - these are special bags or flat boxes with liquid inside, which are used instead of bottles (one large one costs about 120-150 rubles). Only bottles with spring water are free! And even when the water in them begins to melt (and this happens in about a day), it can be used for cold washing or drinking.
Using the previous cardboard refrigerator, food and drinks not eaten or drunk along the way reached the sea cold. We even brought our own ice in the new refrigerator at sea, but it didn’t melt completely! This refrigerator can also be used as a stool. I didn’t paint it on purpose, so that it would be visible if something happened to the MDF (for example, if it started to warp from water). I am completely satisfied with the refrigerator; it justified the time and small money spent on its production. And there are a lot of benefits from it!!!

Modernization of serial vehicles can be divided into two main types: technical tuning and external styling. In the ObvesMag store you can buy accessories for Fiat Doblo 2001-2015, which will help make the car as convenient as possible. All drivers will be pleased not so much to stand out from others as to receive easy-to-use devices. Buy tuning from the main Russian and foreign companies, and you can enjoy the amazing and bright appearance of this car any day.

There is a huge variety of tuning products available now for Fiat Doblo 2010-2014, and sometimes people ask: what to look for first? Our store can offer you to first buy something without which using a vehicle cannot be very pleasant and easy. It is very necessary to buy car mats for the interior of each car, which will help avoid dampness and moisture penetration. Not only is there a risk of rust developing in the car, but there is also a risk of electrical wiring failure, which is even worse.

Another type of important modification is the purchase of visors for the windows and hood. Such tuning will protect the Fiat Doblo 2011-2013 from wind and chips. At ObvesMag there is a large number of different deflectors of all shapes and sizes. Including deflectors with chrome moldings: these accessories perfectly highlight the body line.

Installation of body kit in Moscow

A special area of ​​Fiat Doblo 1 tuning that our store sells is the implementation of an iron body kit and stainless steel sills. Such running boards can help with landing and make the operation of SUVs more comfortable. Without thresholds, it will be difficult for children and older people not to get their clothes and shoes dirty; with them it is more convenient to clean the roof of snow or install bicycle racks.

A practical metal body kit allows you to save the plastic and fenders of the car from contact with neighbors in the parking lot and from other troubles. Various small collisions will pass by thanks to the reliable assembly and stainless steel. Similar tuning for Doblo 1 is recommended when driving on bad roads or in a dense metropolis with a huge number of vehicles.

At ObvesMag we have collected a huge number of accessories for tuning the interior and exterior of a car. Various covers for mirrors and exhaust pipes. Each such accessory will make the appearance of a modern car more stylish and dynamic. You can install all the tuning yourself or in our car service upon purchase. We deliver tuning products throughout Moscow by courier or throughout Russia by transport company: it doesn’t take long and is inexpensive.