DIY outdoor table for the dacha. DIY garden table: let’s do it together. Detailed lesson with photos. Video - DIY garden table

Wood outdoor table for the dacha it is quite possible to make it with your own hands. For this, ready-made or independently developed drawings are used. To do it yourself beautiful table made of wood for outdoor use, must be purchased quality material, and follow the manufacturing rules.

Beautiful and comfortable country table– an indispensable attribute of a summer holiday. When choosing a finished product, you need to decide on the dimensions, as well as with the following parameters:

use of a piece of furniture on outdoors or indoors;
the maximum number of people that can be seated at the table;
budget allocated for acquisition.

The tabletop and body of an outdoor piece of furniture can be made of different types material:

plastic models are ideal option for use in the country. The advantages are affordable cost, relative compactness and lightness. As a rule, they are produced in round or oval shapes and can accommodate approximately six to eight people. Despite the stylish appearance, are not very characterized for a long time operation. Disadvantages include the tendency to destruction as a result of the negative impact of direct sun rays. Also, the lightweight design can overturn in strong gusts of wind, the need to use the most flat surface for installation and susceptibility to damage, which is accompanied by a rapid loss of the original aesthetic appearance;

wood models They look very organic even in a modern country landscape. Such pieces of furniture perfectly complement garden plantings. Such models belong to the category of quite expensive. The disadvantages of natural wood include the ability to collapse and warp under the influence of water and temperature changes, and the legs pressed into the soil can rot, which is why it is necessary to regularly treat with antiseptics;
graceful metal models are distinguished by high quality and incredible durability. Such furniture looks especially beautiful against the background of forged fences and decorative elements. Such tables are distinguished by considerable weight, and are also very high cost. Often modern models are very a good combination metal with wood or glass countertops.

If you plan to use the table in a summer cottage all year round, then the best option there will be a metal structure that is very resistant to any adverse external factors. Legs metal structure They can even be concreted, which will provide additional stability to the piece of furniture.

How to make a wooden table for your garden with your own hands

Tables from wooden planks very often made independently. Of course, this option will require sufficient care throughout the entire period of operation, but it will give local area in the country bright style and identity. Among other things, build the most simple models you can do it yourself with little time and money, even in the absence of professional skills and special tool.

Making a drawing of a table with dimensions

Scheme self-assembly may already be ready, but in order to get an original table with the most suitable dimensions and shape of the tabletop, you need to complete the drawing yourself. When drawing up a drawing, it is recommended to focus on standard dimensions such an item country furniture 178x95x77.5 cm.

Required tools and materials

To make a beautiful and practical wooden table for the garden, need to prepare:

roulette;
pencil;
saw;
drill or screwdriver;
building level.

Work must be carried out using standard safety glasses and gloves. During production need to use Construction Materials presented by:

a pair of boards with dimensions 85x10x2.5 cm;
a pair of boards with dimensions 153x10x2.5 cm
four boards with dimensions 168x10x2.5 cm;
four boards with dimensions 75x10x5 cm;
board 95x10x2.5 cm - 17 pcs;
fastening tools in the form of nails, screws and bolts;
glue for woodworking.

It is also necessary to purchase antiseptic compounds for wood processing, wood varnish or special paint and brushes in advance.

How to make a table with your own hands (video)

Let's get started: making parts for a wooden outdoor table

All elements in the form of wooden boards must be smooth, natural humidity, from quality wood hard rocks. If necessary, before assembly, the boards must be leveled and, if necessary, sanded. To obtain a durable structure, the wood should be thoroughly treated with antiseptics.

It is not recommended to impregnate wood with oil compounds., which have proven themselves very well when used in conditions high humidity, but they increase the level of flammability and give the structure an unpleasant and fairly persistent odor that lasts for a long time. After applying water-soluble impregnations, it is recommended to always apply a layer of a special glazing antiseptic, which allows you to give high decorative properties product and providing additional protection.

Assembly and fastening of main elements

At the first stage of self-production of a wooden outdoor country table, the frame base of the piece of furniture is assembled. It is to the frame base that the boards will subsequently be fixed to create a tabletop and table legs. The frame base traditionally consists of four planed and smooth longitudinal boards measuring 168x10x2.5 cm and a pair end boards dimensions 85x10x2.5 cm.

Assembly must be carried out on the most flat surface possible, securing the end elements to the longitudinal boards using galvanized screws and adhesive. Very important prevent warping of the base during assembly and fastening. After checking the diagonal, additional boards 153x10x2.5 cm must be fixed, which will give the assembled structure additional rigidity, and will also hide the areas where the legs are attached.

The tabletop is assembled from boards measuring 95x10x2.5 cm. The boards can be fixed using either galvanized nails or self-tapping screws. Be sure to leave a gap of 0.5 cm between the tabletop elements. The legs are attached using self-tapping screws or bolted connections. The second option is more preferable and allows you to get removable model, convenient for transportation and storage.

Installing amplifiers is a guarantee of table durability

If there is a need to obtain the most massive and durable structure, then amplifiers are used. To install such parts, you need to turn the product upside down. The transverse reinforcements in the middle of the tabletop are nailed, and the corners of the amplifiers are sawed off to save space. A pair of reinforcements with a shaped cutout that follows the shape of the tabletop crossbars is nailed to the sidewalls.

How to protect your table from external factors

Unfavorable weather, represented by sun, rain and temperature changes, are aggressive environment For wooden structure, used in outdoor conditions. To protect wooden crafts and to extend their service life, special film coatings and various impregnating compositions are used. Most often used protective films based on polyurethane. The disadvantage of such a film coating is the loss of appearance, reduced efficiency and wear after a certain time. Wood protection impregnations are presented as a mixture based on oils and repellent solutions. Both options for protection from external adverse factors have proven themselves well, but require periodic updating.

Wooden outdoor table: drawing (video)

We make a wooden country table from what is at hand

A variety of available materials are often used as materials for creating a wooden country table. Incredibly stylish and very reliable tables made from slabs are an option that you can make yourself if you have some woodworking skills. In this case, you need to be prepared for the fact that the technology for manufacturing tabletops based on saw cuts is characterized by its own specifics and is quite labor-intensive, but the resulting finished product will be unique and inimitable.

Very original in garden design the designs look like:

from wooden beam for true fans of natural materials;
from several stumps or bobbins;
from old window frames with glass tabletop;
from boxes supplemented with various decorative elements;
from an old wooden chest with forged elements.

Tables made from pallets have also become quite widespread. The fashion for such products came from Asia, where such furniture items are often made for lack of available funds. When creating such an option, you can show all your imagination, but it is highly advisable to replace nails from pallets with self-tapping screws, and all fastenings of the frame and boards must be reinforced with special furniture corners. If desired, you can supplement the design with ordinary furniture wheels, allowing you to make the table mobile and easy to use.

How to make a metal table with a wooden top

One of the interesting and durable options garden furniture. For self-production you will need:

metal profile pipe or high-quality rolled metal of sufficient cross-section;
primer for working with metal surfaces;
paint on metal surfaces and brushes;
chalk or light marker;
flat surface for stencil;
wooden table top;
bars and adhesive to secure the tabletop.

The tool can be represented by a welding machine, grinder, metal saw, hammer, screwdriver, self-tapping screws and bolts. The metal is first cleaned of rust and dirt using a steel brush, after which a frame is created in accordance with the stencil.

Welding must be done carefully to avoid the formation of welding build-up. The entire structure is cleaned with a wire brush, after which it is primed and painted. After the paint has completely dried, the tabletop is fixed, which also needs to be treated with special antiseptics, and then varnished or painted.

DIY log table (video)

Self-production making country furniture made of wood is a very interesting and creative process, accessible even to beginners. Such natural material goes well with metal, glass, and plastic, which allows you to create original, unusual and very decorative solutions with your own hands.

Garden table is an integral part of any country interior. On modern market This product is presented in a wide range - these are products made of metal, plastic, natural stone and, of course, classic version, wooden garden tables. In this article we will talk about positive qualities common options and we will give accessible instructions on assembling a table with your own hands.

Wood is always relevant

Most garden furniture has always been made of wood. Almost anyone with at least a passing command of a hacksaw and a plane can make a garden table with their own hands. The whole process comes down to joining a small number of planed planks and giving the furniture a marketable appearance.

A few words about the choice of material

If you want your product to serve you faithfully long years, then it is better to make a garden table from strong hardwood. Of course, the most the best option is oak, but the price here, even at cost, will be considerable. Therefore, as a rule, more affordable larch, aspen, birch, linden or acacia wood is used.

Advice: conifers they can be used for manufacturing, but they must first be well prepared and coated protective compounds. Otherwise, the abundance of resin may negatively affect the quality of the coating and your clothes.

For a countertop, the quality and type of wood are especially important, so experts recommend not saving money and buying a good tongue-and-groove board; the increase in costs will be minimal, but the appearance will pleasantly please you. It is advisable to assemble a wooden garden table from well-dried wood, so that the parts will not be damaged later.

In addition, the tabletop and some individual parts can be made of thick waterproof plywood or USB board. Chipboard (chipboard) is less suitable, since this material is susceptible to high humidity and will not last long in the garden.

Self-assembly

Assembly instructions can be very diverse, everyone chooses what he likes best.

The photos and videos in this article show several interesting and available technologies, we will tell you about the simplest, in our opinion, installation option.

As mentioned earlier, it is better to assemble the tabletop from a tongue-and-groove board, so it will be completely monolithic. The joints should be glued with regular furniture glue on wood. In this case, we will talk about a solid product designed for a family of 6 – 8 people.
Comfortable design height for standard dining table is 700 – 750 mm. We will make the dimensions of the top plate 930x1450 mm. For a tabletop, a board thickness of 20 mm is sufficient, but a tabletop 40 mm thick will look more solid and solid.
The boards are joined on a flat, horizontal surface and knocked down with nails or self-tapping screws, two or three perpendicularly located 50x50 mm bars. The bars are fixed at a distance of 300 mm from the edge.

Advice: since the wood is quite dense and thick, it is better to lubricate the screws with soap before screwing them in. Then they will fit into the array much easier.

Next we move on to arranging the legs. Boards with a section of 50x150 mm and a length of 650 mm will be used as legs. They will be joined at the ends, so in order to reduce the length of the fixing bolts or self-tapping screws, 1 cut is made in the middle on each leg, about 70 mm deep and about 150 - 200 mm long.
The legs are joined at the ends, and the selected grooves should be with outside on the same level. A stiffening rib is inserted between two pairs of legs, the function of which is performed by a 50x150 mm board, about 1 m long.
From above, the legs are attached to the strips that secure the tabletop boards. In the lower part, to increase the support area, two boards of the same section 50x150 mm are tacked to the legs. The length is slightly less than the width of the tabletop.

Important: the entire structure, with the exception of the tabletop, can be made collapsible; for this, furniture bolts with a diameter of 6 mm are used. Or assemble everything with long self-tapping screws, but then the table will not be disassembled.

Do not forget that wooden garden tables will be used outdoors, so all wood must be coated with protective compounds. Often one layer of stain is used to highlight the beauty of the texture and two layers of waterproof varnish.

Important: all wood must be planed and cleaned with a sanding machine or sandpaper before assembly. Sharp corners should be chamfered so as not to drive a splinter in later.

Alternative designs

Easy coffee table it is quite possible to assemble from wooden pallets. For this you will need 2 pallets. The top row of boards should be torn off, the missing ones should be supplemented and knocked together end-to-end, more tightly.

This way you will have a monolithic countertop. To increase the height, 4 bars from the same pallets are inserted between the pallets. It is advisable to install furniture wheels from below.

Plastic garden tables are used everywhere, their price is quite affordable. They are durable, have a neat appearance and, as a rule, are quickly disassembled. But plastic rarely fits in natural interior country cottage. Artificial materials, for the most part, have already become boring in the city, and besides, such products cannot boast of durability.

Forged garden tables are a completely different matter; they are often true masterpieces of furniture art. Of course, making such beauty with your own hands is only possible to a narrow circle real specialists, which is why the price of such products, frankly speaking, bites.

Making stone garden tables with your own hands is quite problematic. Alternatively, you can stack the brick cabinets and install a pre-purchased countertop on top. You can also use a large piece of slate as a countertop, but such installation will require considerable physical effort.

Option for making a table.

Conclusion

Often it is not so important whether you have a wooden stone or metal garden table installed. Any design can be successfully fit into landscape design dachas, the main thing is to do it with love, because you are doing it for yourself.

We continue to develop our summer cottage. Today we’ll talk about how and with what to fill dining area or a relaxation area. It’s hard to imagine a cozy gazebo or shady canopy without a table and comfortable benches or chairs.

Today, garden furniture manufacturers offer a huge variety of tables: large and small, wooden, forged, wicker or plastic.

Of course, you can buy a finished product, but many prefer to make garden furniture with your own hands.

How and from what material to make a table and how to decorate the tabletop will be discussed in this article.

Outdoor table for a summer cottage made of wood

Undoubtedly, the most pliable and environmentally friendly material is wood. A wooden table can be made round, square, rectangular or irregular shape, it all depends on the size of the gazebo or the number of seats. You can use a regular stump as a tabletop leg.

The shape and appearance of the table largely depend on the style of your country house and exterior. Log house can be complemented with furniture made from logs and boards. The main tool for processing parts is Sander, since the surfaces of the table top and benches must be smooth, without nicks.

The tabletop can be made from slats or narrow boards, strung on metal rods, or by connecting them using short slats.

A table made of wooden cuts looks interesting, especially if there is one on the site.

You can make such a table in several ways:

connect the cuts together with staples or tongue and groove joints, forming a flat surface;
secure the cuts to some kind of base (in this case, the parts must be of the same thickness to form a flat surface). The product must be sanded and varnished. If desired, the gaps between the cuts are filled epoxy resin, after drying, the surface is sanded again and coated with a protective compound.

Garden table made of wood with benches, made single design looks great both in the gazebo and in the open area.

It's easy to make. Use the diagram below to make your own drawing and calculate materials.

When drawing up a drawing, consider some generally accepted standards:

bench seat height from ground level – 400-500 mm;
seat width – 300-400 mm;
tabletop height from floor level – 700-750 mm;
tabletop width – 580-900 mm.

The length of the table and benches is individual. The figure shows an example of making a table with benches located on two long sides of the tabletop. Similarly, you can make a structure with benches on four sides.

And here is an option for a small round table with stationary benches-stools for four seats. It is easy to move it to the desired location this moment place: in an open area, under a canopy or in a house.

If you wish, you can purchase or make your own folding garden furniture, which can be easily installed in any part of the garden or in the house.

Such furniture will last longer, as it will not be constantly exposed to precipitation. The weight of such products is small, they can be easily and quickly transferred to permanent place storage in a house or barn, where they do not take up much space.

In order for the product to serve for a long time, everything wooden elements must be treated with an antiseptic and coated with varnish, wax or paint. To give the wood the desired shade, use stain or special impregnation with pigment.

Garden table made from scrap material

We have previously talked about furniture made by. Stylish table, made from pallets, is cheap and looks organically on personal plot. The design, supplemented with furniture wheels, is also mobile.

Ordinary stumps decorated with mosaics look very original and can serve as a small table or stools in a recreation area. For mosaic decor, various tiles left over from renovations, chopped into small fragments and laid on tile adhesive or cement mortar, are suitable.

The originality of this composition lies in creative approach owners. The most ordinary stumps are turned into a work of art.

An old table that has fallen into disrepair can also be decorated with mosaics and thereby update the tabletop. Needs to be removed from legs old paint, sand them and paint them again. Such a garden table will serve the owners for a long time and will gather the family around it for lunch and tea.

A wooden reel for winding cable can also serve as a table, just process it and decorate it a little or simply paint it in the desired color. The table will be easy to move if wheels are attached to the bottom.

Many people have inherited things, as they say: it’s a shame to throw them away and there’s nowhere to put them. Try to be smart and use them when arranging summer cottage. You can use the base of an old table as legs for a table. sewing machine, metal headboards and much more. By the way, you can simply buy a tabletop and install it on top of a metal structure.

Those who have weaving skills can make garden furniture from wicker with their own hands. If you are not capable of such feats, but really love wickerwork, then go to the store. Manufacturers offer tables and chairs made of wicker, rattan or artificial fibers to suit every taste and budget.

Metal garden furniture

If you are “friends” with metal, you have welding machine, then you can make garden furniture from this material. Such furniture, as a rule, is openwork and original. In order for the product to serve for a long time, the metal must be protected from corrosion before use. One of the most simple ways protection metal surfaces is a primer that is applied to the product before final painting.

Forged garden furniture is an excellent solution for respectable home owners. Only masters can make one blacksmith forging with appropriate equipment and the presence of a forge.

Forged products go well with many materials: wood, glass, marble. If you wish, you can purchase a forged table blank and fill it yourself.

Stone table

Recently, small architectural forms made of stone. Also on sale you can find tables and benches made of marble or granite. Such products have a high cost.

But this is not the only solution. You can make your own stone base for tables and benches, for example, from rubble, flagstone, brick or blocks, fitting them into the overall appearance of the garden, combining them with other stone buildings.

As you can see, there are quite a lot of options for arranging a recreation area on a personal plot: from cheap, practically costless, to expensive. A table made with love will definitely gather wonderful people around it, and shared gatherings will bring pleasant moments.

In order to organize a place in the country for outdoor recreation, it is not necessary to buy an expensive wooden furniture or spoil the area with inexpensive plastic fittings. So, you can make a table for a summer house with your own hands, having detailed drawing and a minimum of skills. Even so, this process will take a little time and will bring a lot of pleasure, both during the assembly of such a structure and in subsequent operation.

The drawing of a table for a summer house with your own hands is presented below.

Drawing of a table for a summer cottage made of wood

In order to independently master drawing of a table for a summer cottage made of wood, you will need the following tools:

plane,
screwdriver,
jigsaw or hacksaw,
roulette.

We list the main materials for a DIY table:

10x4 block (although the thickness can be any),
board 15x4,
furniture bolts,
wood impregnation or paint.

Overall dimensions of the table

Our garden table has an approximate width of 1.4 m. This is the optimal width to accommodate 4-6 people. The height of the product will ultimately be about 0.7 m. In order to make assembling a table for a summer house as simple as possible, you can use the following patterns.

DIY table assembly process

First, the main parts are prepared. So, it is necessary to cut the timber and boards into the following components:

Bar: 1.4 m – 2 pcs., 0.8 m – 4 pcs., 0.65 m – 2 pcs.,
Board: 1.4 m - 8 pcs.

Base

The basis for the future table is two rigid frames made in the form of a trapezoid. Such a frame is assembled from two legs 0.8 m long and two horizontal bars (0.65 m and 1.4 m, respectively).

The legs themselves in the side section have the shape of a parallelogram with an acute angle of 60 degrees. The ends of horizontal bars are cut at 45 degrees. To rigidly fasten legs with bars, it is better to use furniture bolts with a length equal to twice the width of the bar, plus the thickness of the washer and nut.

Tabletop

After the two base frames are assembled, they must be installed vertically at a distance of a meter from each other for the subsequent installation of the tabletop of our garden table. As such, four boards 15 cm wide are used. They are fastened with wood screws, leaving a gap of 2 cm between the boards. This way, moisture will not accumulate on the surface of the table, even if most of the time it will stand in the open air.

In order to maintain equal gaps, you can use pre-prepared wedge templates, which are temporarily installed between the boards of the countertop.

Seats

Fastening the seat boards is done in the same way (see previous paragraph).

Painting

In order to DIY garden table served for a long time, after assembly it should be coated with special wood paint. The most common option is regular Oil paint. But you can also find other compositions that are more suitable in terms of environmental and aesthetic properties. The color is chosen from personal preferences, funds and the environment where the table will be installed.

How to make a country table

Arranging a summer house is a constant process. Either you build something, or you improve it. Moreover, furniture is constantly needed and tables are most in demand in the country. And put it in the garden, and near the house, and also in the gazebo. We will tell you how to make a table for a summer house with your own hands in this article using the example of ready-made projects.

Homemade table from pallet boards

The material for this table was disassembled pallets. Naturally, you can use new boards. There is only one condition - they must be dry. You can buy dry ones (this costs more) or buy regular ones, put them somewhere in ventilated stacks and keep them for at least 4 months, or better yet, six months. In general, any furniture, including garden benches. made from dry wood.

We are assembling a table for the street - to put it in a gazebo, so we will not glue the boards of the tabletop, but will fasten them from below, using planks. This is a very simple country table and very cheap.

Having disassembled the pallets, we get boards with individual colors and patterns. Having worked a little magic, rearranging them several dozen times in different ways, we achieve the required result. It turns out to be quite a nice tabletop.

We assemble a tabletop from boards

Take the side parts of the pallet. We use them for the table frame. We first sand them with coarse sandpaper, then fine sand them to the required smoothness (grain 120 and 220).

The side slats will go to the sides of the table

We take the planks that remained unused and use them to fasten the tabletop. We place them in the place where the joints of the boards are located. We use two self-tapping screws to fasten each board with a joint, and one for a solid one.

From the treated sidewalls and two boards (also sanded) we assemble the table frame. We fasten its parts with self-tapping screws at the end (two for each joint). The frame can be glued or also “planted” on self-tapping screws. Only they are long. For each, we pre-drill holes with a drill whose diameter is slightly smaller than the diameter of the screws.

The tabletop is almost ready

We turn the assembled tabletop over and sand it. The order is the same - first sandpaper with large grains, then with small grains.

Next is installing the legs. We select four boards of the same size, check their length, and adjust if necessary. Then - sanding again. This is easier than sanding the legs that are already screwed on. We screw the sanded boards to the frame. These will be the legs. For each there are two self-tapping screws, fixed diagonally (look at the photo). For greater stability, we install jumpers at the bottom. You can leave about 10 cm from the floor to the lintels. We connect everything with self-tapping screws, so that the boards do not crack, we pre-drill holes.

The DIY garden table is almost ready. All that remains is to coat it with varnish

After removing the dust, varnish again. In theory, the varnish should lie flat, but it depends on the wood, so another sanding/painting cycle may be needed. As a result, we get this homemade country table.

DIY garden table ready for use

If you don’t like mismatched boards and traces of old nails, you can make the same design into boards. This table can be rectangular, or square. All sizes are arbitrary - please see the space available.

Country table made from leftover boards

This DIY garden table is assembled from the remains of boards of different types and sizes. We went to the tabletop frame pine boards 25 mm thick and 50 mm wide, leftovers for legs are 15*50 mm. We make the frame according to the dimensions you need. This table will stand on the veranda, which is small in width. So let's make it narrow - 60 cm, and length 140 cm. The height of the legs is 80 cm (everyone in the family is tall).

Assembling the frame, attaching the legs to it

Immediately cut two long boards of 140 cm each. To make the tabletop width 60 cm, subtract twice the thickness of the board used - this is 5 cm. Short bars should be 60 cm - 5 cm = 55 cm. Fold the frame, following right angles, twist with self-tapping screws. We check whether the bars are folded correctly - we measure the diagonals, they should be the same.

We cut the boards into four 80 cm boards and attach them from the inside to the assembled frame. You can use 4 screws for each leg.

Making jumpers for the shelf

At approximately the middle of the height of the legs we attach the crossbars. This is a frame for a shelf. The shelf can be used for its intended purpose, and it also increases the rigidity of the structure. We fasten strictly at right angles, checking with a large square.

We put the frame on the floor and check whether it wobbles or not. If everything is done correctly, it should stand rigidly. Next, take sandpaper or a sander and sand.

Let's start assembling the tabletop. From finishing works There were boards of different types of wood left, some painted with stain. We alternate boards of different colors.

We fasten the tabletop boards with finishing nails, carefully finishing them off with a hammer. You can secure it to the shelf with regular nails or self-tapping screws. Then we smooth it out with a sander. The last stage is painting. Very unlucky with the choice of varnish. We bought it too dark and didn’t like the look. I'll have to sand it again and paint it a different color.

Homemade table for the cottage is ready

Wooden table with glued top

This design features L-shaped legs. They are assembled from boards of the same thickness. In this case 20 mm. In order for them to hold well, 5 self-tapping screws are needed. We pre-drill holes with a drill with a diameter 1-2 mm smaller than the diameter of the screws. Then with a drill larger diameter drill holes for the caps. Diameter can be matched to furniture plugs suitable color or make them from a wooden rod. Another option is to use wood putty, to which you add wood dust that remains after sanding. After drying and sanding, the marks will be difficult to find.

Legs with markings for fasteners

When assembling the legs, you must ensure that the angle is exactly 90°. You can choose timber as a pattern. First, coat the joint of the two parts of the leg with wood glue, then install the screws in the following sequence: first the two outer ones, then the middle one, and only then the other two. After the glue has dried, we sand the legs, varnish them and dry them.

Table legs are ready

It's time to make the tabletop. We assemble it from boards of the same thickness. We select the size as needed. You can use fragments of different widths. It is only important that everything looks organic, and that the sides of the boards are smooth and fit together without gaps.

We coat the sides of the boards selected for the tabletop with glue, lay them on a flat surface (some kind of table) and tighten them with clamps. In this case, we got by with one, but preferably at least three. We tighten it so that there are no gaps in the resulting shield. Leave it for a day. Having removed the clamps, we get an almost finished tabletop. It still needs to be trimmed - align the edges, and then sand it. You can trim with a jigsaw or regular hand saw. It's difficult to get a straight line using an angle grinder, but you can try. After sanding we get a beautiful tabletop.

Gluing a tabletop from boards

Using the same technique, you can make an oval or round tabletop. You just need to draw the appropriate line and trim the glued boards along it.

To make the table look more attractive, we will make a frame. We take a thin strip, sand it with sandpaper and fasten it around the perimeter of the tabletop. You can also use finishing nails. Only we also first coat the planks with wood glue, and then with nails.

We fasten the bar around the perimeter

After the glue has dried, we sand the joint again with sandpaper.

This is what the finished tabletop looks like

Now you can attach the table legs. We assemble a table frame from four boards (there is no photo, but you can do it as in the previous paragraph). We attach it to the back side of the tabletop with glue, then install furniture confirmations through the tabletop. A preliminary hole with an extension for the cap is drilled for the confirmations. The holes for fasteners are masked in the same way as on the legs.

We attach the legs to the fixed frame. We place them inside the frame. You can attach it with regular self-tapping screws. That's it, we made a table for the garden with our own hands.

The board table is ready

How to make a garden table from wood with benches

For this table we used 38*89 mm boards (we unraveled them ourselves), but you can take standard sizes. A difference of millimeters will not greatly affect the results. In the photo below you can see what should happen.

To connect the parts, 16 cm long studs with washers and nuts (24 pieces) were used. All other connections are made with nails 80 mm long.

We connect the table parts together with studs, washers and nuts.

The parts are installed in place, a through hole is drilled with a drill. A stud is installed in it, washers are put on both sides and the nuts are tightened. Everything is catching up wrench. Why is this option convenient? For the winter you can disassemble it and take it to a barn or garage.

Making seats

Drawing of a bench with dimensions

According to the drawing, we cut the boards to the required size. Everything is needed in double quantity - for two seats. We sand the boards, Special attention pay attention to the ends.

The short sections that we use to fasten the three boards of the seat along the edges are cut at an angle of 45°. First, we assemble the structure that is attached to the seat from below. We take a board about 160 cm long, and attach two short boards sawn at an angle to the end of it. You need to attach it so that this board is in the middle.

Bottom seat support assembly

Then we attach the legs to the resulting structure (you can use nails). Then we add more boards cut at an angle and tighten everything with studs and bolts.

We attach the seat boards to the resulting structure. Since this is an outdoor table, there is no need to knock them together closely. Leave a gap between two adjacent ones of at least 5 mm. We nail it to the supports (which have been sawn down), two for each board.

Fastening the seats together

We fasten the finished seats using four boards 160 cm long. We fasten each leg with hairpins (if you walk, you can put two hairpins, installing them diagonally or one above the other).

We connect the legs to the boards using pins

Assembling the table

The table is assembled according to a different principle. Please note that for the tabletop, the transverse boards along the edges are cut at 52°. We attach them at such a distance that the legs fit in. 2 nails for each board. You can use finishing ones, with small heads, or you can drive them deep and then mask the holes with putty.

How to make an outdoor table out of wood

Now we need to assemble the cross legs. We take two boards, cross them so that the distance between their ends is 64.5 cm. We outline the intersection with a pencil. At this point you will need to remove the wood to half the thickness of the board.

This will have to be cut out

We make the same notch on the second board. If you fold them, they turn out to be in the same plane. We connect with four nails.

How to do X-shaped legs for garden table

We make the second table leg in the same way. We are not assembling the table yet.

Installing the table

Now you need to attach the legs to the structure on which the benches are installed. We place them at an equal distance from the benches and fasten them with pins.