Electrolux heated floors. Overview of characteristics and rules for installing a warm electric floor under tiles from Electrolux Main advantages of the system

The need to keep feet warm has been known since the days of Ancient Rome. Then in public baths, as well as in private households, the floors and every room in the room were heated using special systems. It was a stove that was located outside a residential building. From her warm air passed through a system of channels under the floor, as well as into the walls. Thus, all rooms on all sides were heated very effectively. This principle has not been forgotten and is used now, but modern systems have a slightly different design. For example, a modern heated floor from the Electrolux company very effectively heats any floors, and the use of special technologies prevents the creation of vortex flows and allows heat to be distributed more correctly in the room.

Modern heated floor

Nowadays, stoves that were once popular in the world are no longer used. Ancient Rome. Today, for floor heating, a heating system built into the floor is used, based on a special heating element. electric cable. Except high efficiency Such a system has great potential for saving energy resources.

Most apartments use cable systems. For urban conditions they are the most optimal. Here you can trace the golden mean between price and installation complexity. As for comfort, there are practically no competitors here. Using liquid coolant that is pumped through pipes, it is very difficult to achieve the same effect that electric systems provide.

Warm floors allow for a much more comfortable distribution of heat flows. While central heating radiators heat the air, which then goes up, the heat from the floor remains below and then rises to the level of a person’s head, thereby creating optimal conditions for a person. Also among the advantages is a smaller volume of dust that rises as a result of the action of conventional flows, which is important for those who suffer from allergies.

Heated floor systems are equipped with sensors and temperature control systems, which allows significant savings on energy resources. Using similar systems saves on average about 20% of electricity.

Features of electric heated floors

There are several types of underfloor heating systems. So, there are cable, rod and film models. The difference between them is the complexity of installation, as well as the base where they will be laid. As for the principle of operation, these are either convection or infrared heating elements.

Heated electric cable floors are often produced in the form of special sections, mats, or as a cable on a reel. When making a choice, many people are faced with the question - which cable is the most optimal?

There are two types of cable used. It can be single- or double-core. To answer the question of which cable is better, you need to understand a little.

The element can be ordinary (resistive), with a constant very high level resistance. Its main task is to convert electricity into heat. Naturally, any cable one way or another, but converts part electric current in heat, but this is only about 3%. Heating cables are capable of recycling about 100% of electricity into thermal energy. Also, some systems use a self-regulating cable. It has special properties due to which it can regulate the current passing through it.

Both single-core and two-core cables have almost the same efficiency. For example, the Electrolux company offers heated floors built on a two-core cable.

System components

In addition to the cable, such systems also contain other equally important components. These are the thermostat and sensors. Experts recommend for various rooms select and install individual thermostats. This ensures a more comfortable use of the system.

The thermostat or thermostat has one function. It is responsible for turning the heating element on or off. It is also designed to maintain the temperature set by the user. At the right moment, the device, based on the data received from the sensor, will turn on or off the heating element.

Choosing a thermostat for heated floors

There are only two types of these devices. Yes, there are simple devices or with the possibility of programming. Before choosing, you need to decide whether there is a need to automatically turn on or turn off the heater according to a given program.

Simple devices can only do primitive things - turn the system on or off. Often, this functionality is quite sufficient for comfortable use. The user will independently turn on the equipment. Depending on the cable used in the system, heating time can take from 15 to 20 minutes. These devices do not have the ability to disconnect the cable or reduce operating temperature at night or when the user is not at home - the programmable ones have these functions and they allow you to save significantly.

Equipment from the industry leader

The Electrolux company is known to many for household appliances, which is distinguished by a high level of quality. But this is not the only direction of work. For 16 years, this manufacturer has confidently maintained its leadership position in the market for underfloor heating and other electric heating systems.

The company already has a fairly wide range of models. Warm floors are presented in various options. Thus, we offer both cable sections and heating mats, which greatly simplify installation. The company also released a large series of thermostats.

Advantages of Electrolux systems

A real breakthrough in technology, as well as great experience allows the company's engineers to create high-tech equipment that can significantly increase the level of comfort in apartments and private households.

The cable core from this brand is very durable. The material used is aramid threads. This is a special high-strength synthetic fiber. Steel is 5 times less durable than aramid. The material is used for the production of body armor, in the production car tires and much more. This material significantly improves the cable's performance.

The core insulation is made of fluoroplastic. Here high performance to wear, and fluoroplastic has high electrical strength. This insulation allows us to guarantee maximum reliability even with significant overheating.

The base of the heating mat is created on the basis of a unique textile material. Also, for additional strength, it is impregnated with a special adhesive composition. This ensures not only strength, but also excellent adhesion in the screed. The structure of the mat is homogeneous.

The lineup

Among the many options for organizing a heated floor, Electrolux specialists offer heating mats as perfect option. These mats are based on very thin electric heating elements.

When installing such systems, there is no need to fill the screed. Also, installation does not require any special knowledge or skills. Such mats can be installed under absolutely any floor covering. Also, the absence of a screed will not steal space in the room. For installation, you just need to correctly calculate all the parameters, and then, based on the results, you should select a set of necessary and suitable equipment.

Not only engineers recommend Electrolux heated floors. Users leave positive reviews about the company's systems. Thus, reviews talk about the rapid heating of the floor surface, as well as the ease of installation due to the self-adhesive mat.

EasyFix Mat: simplicity and savings

According to the manufacturer, the EasyFix series of systems is one of the most economical and profitable solutions for organizing “warm floors”. The series is represented by a two-core thin cable.

Installation is easier than ever. It is enough to unfold the heating mats on required surface and fix them securely. For this there is special composition. Then it is recommended to check the integrity of the structure using a multimeter, and then, if everything is in order, you can connect the heated floor to the thermostat. Next, you can begin installing floor coverings. This system does not take up much space - the floor will only rise by 10 mm.

Innovative textile base Multi Size Mat

The solution is created on the basis of a special stretchy base made of textile materials. This unique material allows the mat to change its length up to 35%. This design also allows you to adjust the power and laying area. In addition, the shape can also vary. This is very important when there are various obstacles in the way of the heated floor in the form of thresholds, furniture or built-in appliances.

Cable sections

The Electrolux company also offers cable equipment. These sections are intended for installation in concrete screed. The series of systems is perfect for rooms with complex configurations. The installation process takes place with a certain installation step. You can also adjust the power of the heated floor.

One of these sections is Twin Cable. This, according to the manufacturers, is a real full-fledged heating system. It alone is quite enough to create the most comfortable microclimate in the premises. The difference between this system is its special cable. Both wires heat up, and the voltage between them is distributed evenly. What does the consumer get as a result? Efficient heating with minimal energy consumption. Also, the heating rate with such sections is quite high.

Thermostats are the only part of the system that can be seen and used. All devices from the company have a nice design and a wide range of functions. Engineers have created several series of equipment. Thermostats are equipped with all necessary sensors and light indications.

In all series, except the initial one, thermostats are equipped with a display on which all system parameters are visible. The device also implements intelligent algorithms. Any parameter can be programmed.

Whatever consumers choose, any type of Electrolux product is consistently high quality and safe. Any equipment is fully certified, and the warranty on floor heating systems is 20 years.

Such systems are very economical. In this they differ significantly from traditional heating devices. Warm floors are chosen for their high comfort, simplicity and reliability. And underfloor heating from Electrolux is chosen for its excellent quality by professionals and industry leaders. User reviews have already confirmed the excellent characteristics of the equipment.

With the help of heated floors, you can create optimal conditions in any home. For their installation, it is best to choose Electrolux products from a Swedish manufacturer. Using cable systems different types It is very easy to create a heated floor that will be reliable, durable and efficient.

Advantages of Electrolux products

Electrolux heated floors have many advantages, including:

Electrolux heating mats

Heating mats – The best decision to create a warm floor under the tiles. To install them, you do not need to pour a thick layer of cement-sand screed, which significantly reduces the height of the room.

To fix the heating mats, it is enough to use ordinary tile adhesive with a layer of 1-3 cm. They are laid on the prepared concrete base, which is also additionally insulated with foil-coated thermal insulation. It allows the generated thermal radiation to be reflected into the room.

Video instructions for installing Electrolux heating mats

The advantage of thermal mats of all series is that to obtain underfloor heating it is enough to simply lay them on the entire surface of the base. There is no need to calculate the distance between cable turns. They are securely fixed on a special backing, which also prevents them from moving after pouring the mortar under the tiles. If necessary, these elements can be cut to obtain a piece the right size. In this case, it is important to monitor the integrity of the cable.

Easy Fix Mat Series

Heating mats of the Easy Fix Mat series are equipped with a two-core cable 3.5 mm thick. This allows you to install them under tiles or other flooring without using a thick layer of fixation solution.

The range of products from the Easy Fix Mat series includes heating mats of different power and sizes. The length of the elements for installation ranges from 1 to 24 m. The power of heating mats from this series ranges from 75 to 1800 W. Therefore, with their help you can install underfloor heating both as an additional and main one.

Warm floor Easy Fix Mat

The area of one mat also varies and ranges from 0.5 to 12 square meters. m. This variety allows you to lay Easy Fix Mat elements in any room, regardless of its configuration and size.

The advantages of heating mats from this series are:

Multi Size Mat Series

Heating mats from the Multi Size Mat series consist of a thin two-core cable 3.5 mm thick. It is placed on an elastic base, which consists of strips 0.5 m wide. They should be installed in increments of 7.4-10 cm. This design feature allows you to quickly change the area directly during installation heating elements and their running power.

The installed heating elements are connected to the power cable through a special coupling cylindrical type. This unit is necessary to connect a heated floor to a device such as a thermostat. One-way scheme connection greatly simplifies the installation of the entire system.

Features of the Multi Size Mat series:

Eco Mat Series

Eco Mats consist of a thin two-core cable that is fixed to a textile base. It bonds more effectively with the adhesive solution and creates a strong monolithic structure with it.

The advantages of the Eco Mat series are:

reduced degree electromagnetic radiation. Warm floor Eco Mat can be installed in children's rooms, as it is completely safe;
the presence of external insulation made of cross-linked polyethylene. This ensures high resistance of all parts to the harmful effects of tile adhesive or concrete;
the heating mats are connected to the power cable through a thin coupling, which makes it possible not to increase the thickness of the solution for their fixation;
wide the lineup. The Eco Mat series is presented in different variations, which differ in size and power.

Thermostats

Thermostats from Electrolux join warm floor and allow you to control its operating parameters. All devices are different modern design, reliability, ease of operation and durability.

Thermotronic Basic

The Thermotronic Basic electronic thermostat is equipped with a mechanical type heating temperature control mechanism. Adjustment range – +5… +40°С. The Thermotronic Basic thermostat has the following advantages:

perfect combination in appearance invoices and color scheme. This allows you to fit the thermostat into any interior;
the ability to set the required temperature range for the operation of a heated floor;
the presence of a light indicator that displays the operating mode of the device;
3 year warranty from the manufacturer.

Thermotronic Avantgarde

The Thermotronic Avantgarde thermostat has the following features:

presence of a liquid crystal display;
Possibility of programming the operating mode of the heated floor during the day. The thermostat sets the required temperature for every hour;
simple controls;
the presence of several replaceable panels of different colors;
The thermostat operates in a wide temperature range – +5…+50°С.

Thermotronic Touch

The Thermotronic Touch series thermostat is different:

Twin Cable heating sections

The Twin Cable heating cable is installed on the prepared base and enclosed in a thin layer of screed. Its power is 17 W per 1 sq. m. It is two-core, which provides more efficient heating of the floor.

The cable design contains thin armid wire and three-layer insulation. To install a heated floor, heating elements can be installed with a minimum bending radius, which will be important for rooms with a complex configuration.

Video: Video instructions for installing the Twin Cable heating section

Electric heating systems from the world-famous manufacturer Electrolux based on cable heating products and special heating mats are mainly repurposed for comfortable heating of rooms by heating the floor surface, under which the heating system is actually mounted.

Note that the premises in which you can organize an effective electric heating floors can not only be used for residential use, but can also be used for efficient and energy-efficient heating of public and office spaces.
Electrolux heated floor installation instructions, the installation of which will be given below, do not require mandatory installation in a sand-concrete screed, it is enough to lay cable products or a heating mat in a pre-prepared tile adhesive solution.

Advantages of underfloor heating over radiator heating

The manufacturer took care of the compactness of its products and when installing a heating system to heat the floor surface, the level of the latter rises to the minimum level.

Initial stage: planning

On initial stage, which involves organizing a heating system for rooms such as Electrolux heated floors, instructions for which are included with this equipment, it is necessary to plan future installation work.

The algorithm for such planning is quite simple to begin with:

Conduct an audit electrical wiring in the room in which this heating system will be installed for high-quality and uninterrupted connection. To do this, the power indicators of all devices that can be connected to the electrical network during operation of the heating system are summed up. It is also necessary to take into account a variety of devices that can also be connected, but are not required to be permanently connected.
Electrolux heated floors, the installation of which must be carried out by a specialist, and having a power of more than 2 kW, are recommended to be connected via a separate machine to specially installed wiring. In addition, it is advisable to make the connection through an RCD (nominal response rates no higher than 30 mA).
Before installation heating mat or cable products, the resistance of each of the system elements should be measured (data on this is recorded in the warranty card). If everything is in order, then the recorded parameters should correspond to the factory settings (indicated by the manufacturer in the instructions).
The next step is the most important - drawing up a diagram for laying the heating electrical system for underfloor heating. Please note that the distance between the system and other heating devices, walls or communication lines must be at least 30-50 cm.

Laying the heating system: features

Before installing a product such as Electrolux heated floors, the installation of which is quite simple, however, it is better to entrust it to specialists, you should first prepare the surface: remove pointed objects, excess construction garbage, as well as unevenness to provide a smooth base for laying the cable or heating mat.
Next, the location of the mats or heating cable products is determined, taking into account the characteristics of the geometry and the room, as well as the furniture located in it.
You should also not forget where the temperature sensor and thermostat will be located.
Further, Electrolux installation of heated floors involves placing the heating elements directly - after they are placed, you should make sure that the wires of the temperature sensor and power cables do not touch each other.

This is important to consider

Please note Special attention that is strictly prohibited use various kinds of extension cords or extend the wires yourself; these actions significantly reduce the safety of the system and can cause an emergency.
Heating products should be laid with the smooth side on the base, after which the product should be adjusted according to a previously made pattern.
If it is necessary to obtain the desired shape of the mat, the product can be cut only in those places of the heating structure where the frame fabric is present.
Directly cut the heating cable itself it is forbidden, as this will compromise the integrity of the heating system.
The distance between the heating elements must be the same, but not less than 5 cm.
When installing an electric heating system for heating floors, you should not use an overlapping connection of heating elements.

Correct installation The design of the system guarantees a long and safe service life.

As a rule, in winter time years, they wear slippers or wool socks indoors. This trend continues in those rooms where the temperature is above 20 degrees, since modern radiators does not provide full heating of the room. But progress does not stand still and today, using Electrolux heated flooring, you can forever forget about the cool flooring in your room.

Warm floor Electrolux with a unique gloss base

Warm floors from Electrolux have been known not only throughout the country, but also abroad for many years. Such incredible success became possible primarily thanks to innovative technological developments, allowing us to produce products that provide the maximum level of comfort in the room. But let's take it in order...

The heated floor heating cord consists of a heavy-duty core that includes aramid threads. As a rule, aramid is more of a high-strength synthetic fiber, but if we draw a parallel between it and steel, then the strength of aramid will be five times higher. That is why the use of this substance increases the resistance of the cord to tearing or stretching several times.

Important! The cores are insulated with fluoroplastic, which provides them with high wear resistance and electrical strength.

Besides distinctive feature heating mats is that their base is impregnated with a special adhesive composition, which not only creates ideal conditions for adhesion, but also prevents the appearance of bubbles.

Attention! The structure of the mat is completely homogeneous.

Advantages

Electric underfloor heating Electrolux has a number of advantages, the main ones of which are:

Uniform and fast heating of all areas in the room.
Self-fixation.
Durability.
Resistance to heavy physical stress.
Wear resistance.

Installation

As practice shows, one of the most available ways make your flooring warm - use heating mats with a base of thin cords that are attached to a self-adhesive base. In addition, it should be borne in mind that their installation is not only very simple (since it does not require pouring a concrete screed), but also does not require special skills or knowledge. All you need to do is unfold and secure the mat. Make sure that the cable resistance is present and connect the thermostat for the Electrolux heated floor. Then all that remains is to put this coating on and enjoy comfortable temperature flooring

Application

As practice shows, you can not only use Electrolux heated flooring under tiles, but also under other cold coverings. In addition, it has proven itself well in combination with laminate and parquet. But in this case, you must remember to follow basic safety rules.

Common installation mistakes

Note that rooms in which effective electric floor heating can be organized can not only be residential, but can also be used for efficient and energy-efficient heating of public and office premises.
Electrolux underfloor heating, installation instructions for which will be given below, does not require mandatory installation in a sand-concrete screed; it is enough to lay cable products or a heating mat in a pre-prepared tile adhesive solution.