Multifunctional SBS (polymer)-modified, weld-on roofing and waterproofing material of increased reliability.
Flexibility on the beam R = 25 mm, not higher than - 25 0 C, heat resistance + 100 0 C
Designed for installation of roofing carpets for buildings and structures, waterproofing foundations and other structures with increased reliability requirements in all climatic regions. The element of Technoelast is the cold of the polar night and constant pressure man-made groundwater. It is used where other materials are unlikely to provide the required level of protection against water. Technoelast is always where serious construction projects. It is there where only the highest reliability is needed. Technoelast review
Technoelast is intended for installing roofing carpets on buildings and structures, waterproofing foundations and other structures with increased reliability requirements in all climatic regions. Technoelast's element is the cold of the polar night and the constant pressure of man-made groundwater. It is used where other materials are unlikely to provide the required level of protection against water. Technoelast is always there where serious construction projects are implemented. It is there where only the highest reliability is needed. Technoelast is produced by applying a bitumen-polymer binder containing bitumen, SBS thermoplastic and fillers to a fiberglass or polyester base. Coarse-grained K, fine-grained coating M and polymer film P are used as a protective layer. Technoelast is fused using a propane torch.
Features of Technoelast
Technoelast is biostable.
Application area
Designed for installation of roofing carpet of buildings and structures and waterproofing building structures.
Structure of Technoelast
Technoelast is produced by double-sided application of a bitumen-polymer binder consisting of bitumen, styrene-butadiene thermoplastic elastomer and filler onto a glass or polyester base. Coarse-grained and fine-grained dressings and polymer films are used as a protective layer.
Technoelst brands
Depending on the type of protective layers and area of application, Technoelast is produced in the following grades:
TOWith coarse-grained coating on the front side and polymer film or fine-grained coating on the welded side of the web; used for installing the top layer of roofing carpet;
P
With fine-grained powder or polymer film, or a combination thereof, on both sides of the canvas; used for installing the bottom layer of roofing and waterproofing building structures (foundations, tunnels, etc.).
Table Characteristics of Technoelast
| Parameter name | TO | P | |
| Cover type: | top | film | film |
| bottom | slate | film | |
| Weight, kg./sq.m. no less | 5.0 | 4.6 | |
| Tensile strength in longitudinal/transverse direction, N, not less | on polyester | 600/400 | 600/400 |
| on fiberglass | 800/900 | 800/900 | |
| on fiberglass | 294 | 294 | |
| Thickness, mm | 4.2 | 4 | |
| Water absorption for 24 hours, % by weight, no more | 1 | 1 | |
| Weight of binder on the welded side, kg/sq.m., not less | 2 | 2 | |
| Loss of powder, g/sample, no more | 1 | ||
| Flexibility temperature on timber R=25mm, оС, not higher | -25 | -25 | |
| Flexibility temperature on the beam R=10 mm, °C, not higher | -25 | -25 | |
| Binder brittleness temperature, °C, not higher | -35 | -35 | |
| Waterproof for 72 hours at a pressure of at least 0.001 MPa | absolute | ||
| Waterproof at a pressure of at least 0.2 MPa, for 2 hours | absolute | ||
| Length\width, m | 10x1 | 10x1 | |
| Heat resistance, °C, not less | 100 | 100 |
Manufacturing jobs
according to the “Guidelines for the design and installation of roofs made of bituminous materials of the TechnoNIKOL Corporation”, can be used in all climatic regions in accordance with SNiP 23-01.
Technology development allows for improved performance traditional materials for construction, including roofing. Popular new products on the construction market include TechnoNIKOL Technoelast EPP and other types of waterproofing weld-on material.
Technoelast in a roll
Description
Technoelast is roll material, resistant to biological destruction, with high waterproofing properties. The manufacturing technology consists of double-sided application of a special water-resistant composition onto a durable, flexible base made of polyester fiber or fiberglass. They use modified bitumen, to which SBS thermoplastic is added.
SBS - polymer material(artificial rubber), which has high functional characteristics. It allows bitumen to maintain elasticity when low temperatures, due to which the waterproofing coating does not crack in cold weather.
The polymer-bitumen composition includes fillers - dolomite, talc, etc. The outer layer on the back side is a polymer film that protects the material from sticking when stored in a roll. The film melts during the installation of the flooring. The top layer can also be a film (this allows you to create a durable multi-layer waterproofing carpet) or a protective mineral coating is used - fine or coarse-grained, for which sand, slate, etc. are used. with the addition of a binder.
Structure Technoelast Purpose
The use of the material is associated with the protection of structures from the destructive effects of moisture. Technoelast waterproofs:
- building construction various types(walls, floors, installation connections);
- surfaces in direct contact with moisture (basements, foundations, swimming pools);
- all types of roofing systems (pitched, flat, including exploitable ones, “green”, etc.).
The reliable and easy-to-install material allows you to fuse a waterproofing carpet, which 100% protects structures from moisture, water vapor, condensation, and gas penetration. The installation of such waterproofing is allowed in any region with any climate, taking into account current standards SNiP 01/23/99.
Main advantages
The technical characteristics of the rolled welding material Technoelast meet not only Russian, but also global requirements. Waterproofing and roofing coatings made from Technoelast are designed for use in regions with any climate, including areas with harsh weather conditions. The production of multifunctional material is carried out on modern equipment using advanced technology, using high-quality raw materials.
Technoelast ensures absolute waterproofness of the structure, regardless of the place where it is installed - as part of roofing system, during the construction of hydraulic structures, arrangement of foundation protection, etc. Technoelast is used both on the surface and inside structures, therefore it is considered universal.
Brands and technical parameters
Technoelast waterproofing is available in several versions for various applications and operating conditions. Abbreviations that designate types of material, are deciphered according to the following principle:
- The first letter is the base material. E - ether (polyester), T - fabric, X - canvas.
- The second letter is the top protective coating. P - film or fine-grained topping, K - crumbs.
- The third letter is the bottom protective layer. P - film or fine-grained topping, K - crumbs.
EPP
Technoelast EPP is used to protect building structures, including foundations, from moisture, as well as for laying underlayment when installing roofing coverings on roofs of any type. It is absolutely waterproof and, due to its high elasticity, is easy to use.
The basis of the material is polyester fiber; SBS-modified bitumen with filler is applied to it. The lower protective layer is made of film, the upper one is made of fine-grained powder.
The thickness of the material is 4.0 mm, the weight of 1 m 2 is 4.95 kg, the weight of the roll is 50 kg, the service life is 20-25 years.
HPP
Technoelast XPP is designed to create the first lining layer when installing a roofing pie, and is used in the field of waterproofing various building elements. Characterized by frost resistance and heat resistance.
The basis is fiberglass with purified bitumen applied on both sides. polymer additive(SBS) and filler. Protective coating There is a film on the top and back sides that prevents the fabric from sticking together after being rolled.
HPP technoelast is different minimum thickness, since it does not contain polyester and mineral chips of the outer coating. The material is designed for low loads.
The thickness is 3 mm, the weight of 1 m 2 is 3.88 kg, the weight of one roll is 39 kg, the service life is 20-25 years.
ECP
Technoelast EKP is a roofing waterproofing material designed for installation of the top layer of roofing. Technoelast EPP and EKP in joint use make it possible to install a reliable roof designed for high loads. EKP roll material is also suitable for waterproofing basements. Advantages include resistance to cracking in severe frosts.
The base is made of polyester, the waterproofing function is performed by bitumen with the addition of thermoplastic and filler. The back side of the material is covered with a protective polymer film, the top coating is made of coarse mineral chips, due to which roofing material resistant to mechanical damage, ultraviolet radiation and other influences.
Thickness - 4.2 mm, weight 1 m 2 - 5.25 kg, roll weight - 53 kg, service life - 20-25 years.
TCH
Technoelast TKP is a material designed for high loads. Suitable for installation of waterproofing protection of underground structures (basements, foundations). When installing roofs on pitched and flat roofs can be used without additional lining materials. It is distinguished by its strength and durability, is vapor-proof, and is laid in a perfectly even sheet.
Technoelast TKP is deservedly considered the most durable top layer among the whole variety of bitumen-surfaced materials. It differs from other types in the use of fiberglass as a base, so it copes well with the functions of a roofing carpet on almost any type of roof.
The fiberglass fabric is impregnated with modified bitumen to achieve maximum strength and durability. As a top coating, Technoelast TKP is covered with stone chips or slate of different colors.
Characteristic features of Technoelast TKP are increased strength characteristics and extended service life. The coating is resistant to atmospheric and mechanical influences. It does not suffer from the cold, high temperatures, changes, humidity and other conditions.
Technoelast TKP is best suited for the top roofing of buildings and structures different types. For ease of storage and transportation, the bottom layer is coated with protective film. A properly laid roof has no irregularities or defects, forming a complete sheet.
— waterproofing, built-up, styrene-butadiene-styrene modified, polymer-bitumen, roll material. It is made by applying a bitumen-polymer binder to a finished polyester/fiberglass/fiberglass base. The surface of the rolls is treated with different-grained coatings or polymer film.
Application
Product brands
Technoelast K (EKP, TKP, EMP)- material with coarse-grained/fine-grained powder on the front side and polymer film/fine-grained powder on the surfaced side of the waterproofing sheet. Used as a top layer of insulation with protection from sunlight.
Technoelast P (EPP, HPP)- material with a polymer film/fine-grained powder, or a combination thereof, on both sides of the waterproofing sheet. Used as bottom layers in multilayer insulation of building structures(tunnels, foundations, roofs, etc.).
Features of the material
- The ability, due to the properties of the bitumen-polymer binder, to restore the tightness of the waterproofing layer in the event of mechanical damage (puncture, cut)
- Stable thickness. During production they are specified exact value thickness, which is a controlled indicator of the quality of the material
- Hydrophobized coarse-grained coating (slate) provides protection from UV radiation and retains moisture
Basic physical and mechanical characteristics
| Indicator name | EPP | HPP | ECP | TCH | EMF | |
|---|---|---|---|---|---|---|
| Thickness (±0.1), mm | 4,0 | 3,0 | 4,2 | |||
| Weight 1 m², kg, (±0.25 kg) | 4,95 | 3,88 | 5,25 | 5,32 | 5,60 | |
| Length/width, m | 10x1 | |||||
| Maximum strength tensile strength, N, not less |
along | 600 | 300 | 600 | 800 | 600 |
| across | 400 | - | 400 | 900 | 400 | |
| Flexibility temperature on the beam R=25 mm, °C, not higher | -25 | |||||
| Heat resistance, °C, not less | 100 | |||||
| Weight of binder on the welded side, kg/m², not less | 2 | |||||
| Water absorption during the day, % by weight, no more | 1 | |||||
| Waterproof for 2 hours at a pressure of at least 0.2 MPa | absolute | - | absolute | |||
| Waterproof for 72 hours at a pressure of at least 0.001 MPa | - | absolute | - | |||
| Type of protective coating | top | film | slate | sand | ||
| bottom | film with logo | |||||
Examples of using
Installation of unused roof concrete base
Installation of an exploitable roof under load with drainage 
Examples of TechnoNIKOL systems using Technoelast waterproofing
Logistics parameters
Storage
Insulation rolls must be stored in a closed, dry room at a distance of more than 1 m from heating devices. The material is placed in one row in height in a vertical position.
Packaging information
Pallets with rolls are packed in a shrink bag white. There can be 20 or 25 rolls on a pallet, depending on the brand of product. Sun-protective white packaging reduces the likelihood of overheating of the waterproofing inside the pallet, preserves appearance and consumer qualities of the material.
The use of Technoelast series materials significantly increases the maintenance-free service life of objects, and as a result, money, time and labor costs are saved.
When waterproofing unused flat roofs on a concrete base
| Design | Insulation | Laying | Material | |
|---|---|---|---|---|
| With screed | Styrofoam | Welded | V | Technoelast EKP |
| n | Uniflex Vent EPV | |||
| Combined | V | Technoelast EKP | ||
| n | Technoelast Fix | |||
| Without screed | XPS | Combined | V | Technoelast EKP |
| n | Technoelast Fix | |||
| Inversion | XPS | Combined | V | Technoelast EPP |
| n | Technoelast Fix | |||
Consult, check availability, fill out applications and find out about discounts