DIY everything for aqua. How to make an aquarium with your own hands. Clay and ceramic products

Most of us love animals. Some people prefer a cat or a dog as a pet, others love exotic things and buy raccoons, chameleons or skunks. Some want the peace that comes with watching fish. It is precisely for the latter that information on how to make an aquarium with your own hands will be useful.

Glue plays the main role, because it is thanks to it that the entire structure is fixed and further retained. There are many types of substances that can be used to connect pieces of glass to each other. But with regard to aquarium glue, the following requirements are put forward:

non-toxic;
high strength;
elasticity;
presentable appearance;
relatively fast setting;
ease of application;
long service life;
high degree of adhesion.

Silicone sealant has all these properties. But when purchasing, you should pay attention to the fact that it is 100%, without impurities and not antibacterial, otherwise the living creatures will simply die. Today there are three main colors available: white, transparent, black. If you use the first one, the aquarium will have the appearance of a certain incompleteness. The second is well suited for products up to 100 liters. Anything more is best glued with black. Small structures with it look very bulky, but in large ones, on the contrary, it emphasizes the lines and gives elegance. The choice of those who have been assembling aquariums for some time often falls on Dow Corning 911, KNAUF 881 or Kleiberit Suprasil 590E.

Typically, manufacturers themselves indicate that a specific type of sealant is intended for the manufacture of aquariums. But be sure to look at the ingredients.

If you decide to self-assembly aquarium, then now is not the time to save. There are many options for tables and calculators that promise to give perfect result. But rarely is the need to install transverse or longitudinal struts indicated. Before you start choosing the thickness of the glass, you need to decide on the desired dimensions. If you are doing such an operation for the first time, then it is better not to take risks with non-standard forms and bends. Next, we calculate the volume of our structure. To do this, multiply the length, width and height. Roughly speaking, the standards will be as follows:

up to 30 l - 4 mm;
up to 80 l - 5 mm;
up to 150 l - 6 mm;
up to 220 l - 8 mm.

Below is a table that takes into account the main points. It will allow you not to stock up, which will slightly reduce costs.

You should not use glass that is already for a long time lies in the basement, garage, stood on display or in another place. The fact is that, in a certain sense, this type of material also has its own service life. It interacts with the environment, which leads to the loss of sodium ions. They will be replaced by other particles that weaken the strength. You need to buy a new one and consider the following:

Regular will do silicate glass. Silicone sealant interacts well with it, forming a molecular bond that allows it to withstand a pressure of 200 kg per 1 cm of seam.
It would be better if it was brand M1.
There should be no sagging or unevenness.
Choose something that doesn't have bubbles. On the one hand, they will interfere with aesthetics, and on the other hand, they will weaken the strength.
If the edges are already polished, then they should be perfectly smooth, since the sealant interacts better with such surfaces.

If you have never cut glass, then it is better to order it from a workshop. This is a very important moment, because the edges after cutting must be perfectly even, otherwise it will not be possible to glue them securely. Prepare two copies of the drawing. Give one to the glazier, keep the second for yourself, so that there are no questions later in case of discrepancy.

Tools

After the main expenses are completed, you can begin to prepare the necessary tool, and you will need the following elements:

silicone gun (also called a skeleton);
metal corners;
small clamps;
small-width masking tape;
stationery knife with a retractable blade;
small spatulas;
substrates to create a gap.

Metal corners and clamps can be replaced with corner clamps. But if you will not use them in the future, then there is no point in spending money on purchasing them.

For assembly, it is better to choose a flat surface; it must be stable, and its size must allow all the components to be placed freely.

Depending on which configuration is chosen, the angles can be:

straight;
sharp;
stupid.

Before applying sealant, it is very important to degrease the surface. You can use alcohol or acetone for this. The size of the seam is selected according to the load that will be exerted on the glass:

The bottom can be installed in two ways:

the walls rest on it;
built around it.

In the first option, the general frame is first assembled, after which it is turned over with the bottom side up, degreased, sealant is applied and glass is laid. In the second option, gluing the walls will need to be done together with gluing the bottom.

In some cases, another glass can be used to strengthen the bottom edge. In this case, the two elements are glued together over the entire area.

If the design involves the presence of stiffeners, then it is important to remember what requirements they must meet:

the size of the longitudinal ones should be equal to the length of the larger wall;
the width should be from 5 cm (for models up to 50 liters, 3 cm is enough);
glass of the same thickness must be used;
to give greater strength, it should be glued overlapping, and not on the inside.

It usually takes up to three days for the sealant to dry completely. At this time, it is better not to move the structure or damage its integrity. If this is not observed, then the seams simply will not withstand the planned load.

Installation

After the aquarium has already stood for the required period, it is not yet worth installing it in the planned place. It's better to test it. To do this, it is brought into the bathroom, placed on a flat surface (you can build stands and place it on the bathroom) and filled with water to the desired level. It is left in this state for several days. If all is well, the liquid is removed and the structure is mounted on its pedestal.

From an aquarium you can make a partition between rooms. If it is located in a partition, care must be taken to ensure ventilation. This will remove moisture that evaporates, which will prevent the formation of fungus. It will also be allocated bad smell. It is better to cover the surface above the aquarium with a vapor barrier - foil. If it is simply installed on a separate pedestal, then it is covered plastic cover with slots for air circulation.

In any of these cases, it is better to lay a layer of foamed polyethylene under the aquarium. This will compensate for some unevenness, which will prevent the risk of chipping.

Interior arrangement

The arrangement of internal elements is, by and large, an expression inner world owner, but there are some rules that are worth considering:

It is better not to put sand on the bottom. It quickly collects sludge, which will lead to the need for frequent cleaning. It is better to use small and medium caliber pebbles. Only a large one will not work, because the plants will not be able to cling to the roots.
Algae are selected for future inhabitants. They are an important part of the microflora, because to some extent they provide water purification, as well as its saturation with oxygen.
Additional decorative elements and driftwood will not easily serve to improve the interior. For some fish species that like to spend time in solitude, they are simply necessary.
A pump and filter must be installed. They will ensure the flow of water, as well as the removal of accumulated harmful substances which could lead to the death of the inhabitants.
An integral attribute will be an aerator. It ensures the supply of sufficient oxygen.
In order to provide enough light, special lamps for aquariums are installed that are capable of emitting ultraviolet light.

Used for aquarium pure water. It should not be boiled or mineral. It is necessary to let it settle well. The fish can be launched two weeks after everything has been assembled and installed.

The entire process of caring for the aquarium and its inhabitants comes down to the following:

Checking the functionality of all pumps and filters.
Clean filters when dirty.
The walls can be cleaned using two brushes with built-in magnets. They are simply installed on opposite sides of the glass and move in parallel.
In order to determine whether it is necessary to clean the bottom, you need to move the stick along the ground. If air bubbles rise, then there is a need to take action. For this purpose, special mud scrapers are used. You can make it yourself. You will need a plastic bottle, silicone hose and two syringes. We make a sleeve from one syringe, cutting off all unnecessary parts. In the second, we cut off the finger rests, and cut a 5 mm hole at the place where the needle is connected. We connect them together so that the sleeve is at the bottom. We connect the bottle and syringes using a hose. The process boils down to the fact that the syringes are immersed in the soil, and with the help of a bottle pressure is created, which raises all the sludge. Next comes the pump and filter. In some cases it may be necessary complete replacement water. During this period, you will have to take care of temporary housing for the fish.

As you can see, if you approach the issue wisely and spare no expense on basic materials, then you can assemble an aquarium at home with the most positive results. Now you can try to make semicircular or cone-shaped aquariums.

Video

Learn how to glue aquarium glass in the following video:

As a rule, aquarists are very passionate people who are ready to do anything for their silent pets, including creating an exclusive decorative design water house. Decorating an aquarium is a creative process that entirely depends on the aesthetic taste of its owner, and every person feels special pride if the unique decorations are made with their own hands.

Wanting to decorate his aquarium, creating a unique environment in it, an aquarist can use individual elements and parts sold in stores, as well as natural objects and materials. Decorations can be very simple or complex. For example, these could be models of ancient buildings of ancient times or knight's castles, a simple hill of neatly stacked stones or a fancy cave with several entrances. It all depends on the person himself. Of course, certain decorations must necessarily correspond to the character and habits of the aquarium inhabitants.

DIY background

Coconut as an aquarium decorative element

Wooden decorative elements

Stone

Ceramics as decorations

Some general decorating rules

No matter how much you would like to decorate your aquarium with a variety of crafts, you should not clutter the interior space too much. It must be remembered that its inhabitants need more swimming space.

It is recommended to place homemade decorations in the background or on the sides, since the basis of any aquarium is its inhabitants, and not crafts. In addition, such placement will help hide from view technical devices to ensure the vital functions of fish (filter, aerator, thermometer). It is advisable to leave only low decorative elements in the central part of the aquarium composition.

In pet stores you can easily purchase almost everything you need to decorate a fish house. But only well-made home decorations can serve as an object of pride for any aquarist and give the interior space a unique look and beauty.

How to make decorations for an aquarium?

If you are looking to create a unique aquascape within the walls of your home aquarium, you need to create your own aquarium decorations. For crafts, you can use both special materials from the store and improvised materials, but they are safe and pre-processed. Homemade decor can be made from natural or artificial raw materials; these can be simple or complex blanks. Simple decorations include the simplest grottoes, caves or wooden decks. Complex ones include sunken ships, chests, underwater cities, and bizarre underwater reefs.

How to install a background yourself

A background composition made in the form of an imitation of a rocky bottom, a coral reef or thickets of dense plants can recreate a colorful perspective on the walls of the aquarium. Proper lighting and decoration of the back wall of the aquarium will attract the attention of caring admirers of marine aesthetics. Of course, it's all a matter of taste, because some people prefer a completely darkened background, while others want to see something exciting.

The second option is more appropriate because it provides the opportunity to dream up. You can apply beautiful ocean-themed patterns to the back wall of the tank using a special self-adhesive film with a print. An important aspect is to attach the material well to the glass. To do this, you need to degrease the surface of the glass with a special solution, then moisten the glass with water from a spray bottle, and carefully stick the sticker on. Then use a plastic card to align the pattern, removing air bubbles under the coating.

You can make a background using foam plastic. The material is absolutely harmless and easy to use. It is necessary to burn one side of the part until small bubbles appear. When it cools down, you need to apply a thin layer of cement to the surface of the abrasive. The result will be a gray relief, similar to an underwater rocky reef. It is attached with the decorated side to back wall aquarium using tape. It looks beautiful and natural.

See how to do it the background for aquarium.

Coconut decorations

Decorations made from wooden driftwood

Stone sculptures

Clay and ceramic products

DIY decorations and crafts for the aquarium

Psychologists say that an aquarium allows a person to relax and get rid of stress. And if the design of your aquarium is also close to the natural sea or river bottom (this means that there are no artificial ships, skulls, crushed vases, colored gravel), then such a piece of nature will help you relax even more.

To create such a corner of nature for yourself, you don’t need to spend a lot of money. Everything that can be used to decorate an aquarium is at our fingertips. And the process of creating decorations for an aquarium is quite fascinating. Today natural and natural decoration of aquariums is very fashionable. You can buy such jewelry in a store, but why spend money if you can make it yourself?

Grotto

Snag

Volumetric background

Aquariums are a whole universe for such small living creatures of the water element as fish, skates, crustaceans, snails, snakes... Their number is pleasantly shocking in any artificial reservoir. DIY aquarium crafts are a creative, exclusive process that depends on the talent of the owner. Aquarists take great pride in the wonderful creations they create. These masterpieces are beautiful and at the same time convenient for the aquatic inhabitants inhabiting aquariums. How many varieties can be implemented when making a magnificent brainchild!

Creating a background

You can create a mythical fairy tale from any wonderful moment in life. Someone remembers a vacation in the mountains and uses rock sculptures to create decorations. Someone cannot forget scuba diving to the bottom of the Black Sea with numerous strange algae on the bottom. Decorations for the aquarium can be created using a black tint. Thanks to this color, space is visualized. At the same time, a colorfully laid out mosaic of stones with colored lighting gives the splendor of the beauty of the water kingdom.

Background decorations for aquariums can be created by painting the surface and applying decorative designs. Can be used self-adhesive film, glued to a sheet of plywood. A pattern created by artists is applied to it. It must be tightly attached to the back wall of the artificial reservoir. glass surface wipe with glass cleaners and degrease. Otherwise, the film may fall off and scare the aquarium inhabitants. The surface is moistened with settled water, applying a plywood sheet evenly. Air is squeezed out of the film by evenly stroking or puncturing the surface. The plywood is secured with high quality tape.

When creating decorations for an aquarium, you can use a sheet of foam. It will serve as a screen, which can be replaced with other decor at any time. A rock, a castle, a waterfall is cut out of the material... The front side is burned with fire until small bubbles appear. Alabaster, gypsum or cement is applied to the hot side. After complete drying, the surface is painted over with gray or gold paint. Attach artistic crafts facing the aquarium. The decoration for the aquarium will serve as a wonderful backdrop for its inhabitants.

The splendor of the waterfall

Aquarium decoration of waterfall splendor is created the mythical fall of a seething stream of water. The powerful effect is achieved by the skillful design of the falling jet of sand. This action is created thanks to air compressor, creating a vacuum. Using injection, the sand rises up through the tubes and then smoothly descends, creating a wonderful illusion. With bated breath and eyes filled with delight, those observing the life of the water element will appreciate the beauty of the picture. You can create decorations for an aquarium in the form of a wonderful waterfall yourself using a compressor. You will need:

A support whose height will serve as the size.
Transparent tape.
Hose with a diameter of up to 15 millimeters.
Plastic bottle for mineral water.
Silicone glue.
Purchased hoses from droppers.
Decorative stones.

The decoration of the aquarium is created using a support. For the necessary stability, it is necessary to attach a rectangular base. Several decorative pebbles are glued onto it, which create the necessary weight and additional stability. A hose is attached to it so that the edge of the top is 1 centimeter above the water. A hole is cut at the bottom of the hose for a sand storage bowl. This vessel is made from plastic bottle. The top of the neck is cut off, which is cut lengthwise in the form of a scoop. The bowl is inserted into the hose and tightly fixed with transparent tape. All joints are sealed with silicone glue. Aquarium decorations do not tolerate depressurization of seams. Otherwise the injection will not work. Tubes from the droppers are attached to the lower edge of the hose. Air is supplied through this device. A hole is cut in the lower part through which all the sand will pour out. The structure can be decorated with small pebbles, plaster, and cement. You can use it to create a beautiful, mesmerizing castle or a mysterious cave. The decoration of the aquarium will be a wonderful addition for its aquatic inhabitants.

Exclusive water architectures

Architecture small form can be replaced with twigs and tree roots found in the forest. True connoisseurs of exclusive jewelry carve from wood various caves, ships, holes, as well as various inhabitants of the water kingdom. Decorations for an aquarium in the form natural trees look great. Viewers are presented with a panorama of the dragon's fairy-tale world, among scattered colored treasures near a wooden chest and a sunken ship. Such shelters will become a favorite place for domestic inhabitants.

When making crafts, the material is soaked in salt water for 30 minutes. Then the future workpiece must be boiled and cleared of bark. You need to cut a hole on the side that will serve as an entrance. The edges are burned over fire and cleaned of loose particles. Then the aquarium decoration should lie for 7 days in boiled water. Only after all the procedures is the wood placed on the bottom of the aquarium, secured with silicone glue or decorative stones. Do not use rotting wood. Particles of such material will get into the aquarium water and negatively affect the health of the inhabitants. It is not recommended to use oak. Its substances emit organic acids that are harmful to fish. Due to the resin content, aquarium decorations should not be made from coniferous trees.

Stone treasury

Treasures of sunken ships skilled craftsmen made from ordinary small pebbles. Flat stones of small size and regular round shape are especially loved and in demand. The production of decorations for aquariums is carried out according to the design and imagination of the master. The gluing of stones is created using special silicone according to the artist’s drawings. It could be a stone fortress or steep cliffs, a stone bridge or a mysterious cave.

Decoration for an aquarium in the form of small pebbles goes well with a sand waterfall and wooden crafts. A natural stone easy to use and has global capabilities for creating unusual figures. You can use smooth pebbles, which are attached well with silicone glue. It is prohibited to make decorations for aquariums from alkaline materials. They change chemical composition water, creating conditions unsuitable for existence. In such a situation, aquatic inhabitants may die. To test the stones for alkalinity, you should drop apple cider vinegar on their surface. If hissing bubbles appear, it is prohibited to use such pebbles, as an alkaline reaction has occurred. This material contains calcareous molecules and is unsuitable for use. If the reaction is neutral, the pebbles are placed on the bottom of the aquarium or glued with glue.

Decoration for an aquarium in the form of pebbles goes well with shells and corals. This material is loved by African cichlids living in similar natural conditions. For other types of marine life, it is better to use the following types of stones:

granite;
pebbles;
quartzite;
amber;
marble;
slate;
porphyry;
gneiss;
Mineral stones.

Decorations for aquariums with very sharp edges should not be used, as the fish may be injured. Figures made of stones are indispensable when decorating home and office aquariums. They fill the interior space well, creating a fairy tale world.

Decorations for aquariums are especially appreciated when you create them yourself. All the beauty of the water element can be shown in all its glory with the hard work and talent of the master. Only with his imagination and skill can mysterious water crafts be brought to life and reproduced. They will attract and delight numerous spectators with fabulous fantasies made of wood, stone, foam plastic, beads, ornamental plants, sand. The world inside the aquarium will seem real, mysterious and attract the eyes of others to it.

The most simple crafts using available means will help you decorate your aquarium. By making your own decorations, you will save money and be able to decorate your pets' water area in a way that is ideal for you.

How to make decorations from pipes for an aquarium?

Homemade decorations for an aquarium made of foam rubber

Here's another one creative idea for decorations. Intricate shapes can be made using foam rubber. So, you will need foam rubber, a brush, mounting foam, scissors, toothpicks, tile adhesive, silicone and acrylic paint for outdoor work. From foam rubber you can easily make not only a “pile of stones”, but also various grottoes for fish.

Cut off whole piece foam rubber that matches the dimensions of the back wall of your aquarium. Next, you must turn on your imagination and create the grotto the way you want it to be.
When the frame is ready, its elements need to be secured. Use polyurethane foam and a pistol.
When the workpiece has dried, dilute the tile adhesive to a thick sour cream. Using gentle movements of the brush, apply the mixture to the frame in 3-4 layers, giving each of them time to dry.
The final step is to take a sponge, soak it in acrylic composition and apply to decorations. This will give the structure a more attractive look. Since foam rubber is very light, it is necessary to secure it to a rigid base. It could be a piece of glass.

Place the decorations in water to “soak” for 3 days, then you can move them directly into the aquarium with the fish.

Do-it-yourself grotto for an aquarium: some interesting and simple ideas

Anyone, even a novice aquarist, knows how important decorations are for an aquarium. They not only make it more aesthetically pleasing and harmonious, but are also actively used by the inhabitants for games and relaxation. In specialized stores similar equipment- mountains. However, they do not always correspond to the design intent, are quite expensive, and sometimes also raise doubts about their safety: the dominance of Chinese handicrafts cannot guarantee non-toxic materials and sufficient treatment to prevent pets from getting hurt. Therefore, competent people prefer to make a grotto for an aquarium with their own hands. In this case, it will definitely fit into the underwater landscape and will be absolutely safe for fish.

A few words about the scenery

"Hastily"

In some cases, you need a grotto for an aquarium with your own hands immediately: for example, you were given newbies, and the “pool” turned out to be too small for them. While waiting for their living conditions to improve, the fish may kill each other. An “instant cooking” house can save the situation.

Taken Glass bottle the right size(for example, from ketchup), washed, boiled and dried. Dry aquarium sand is scattered on a newspaper, the container is coated with silicone and rolled in the ground. After an hour, when the silicone has set firmly enough, the pebbles and pebbles you like are glued onto the adhered sand. They add aesthetics and give the bottle stability. A do-it-yourself grotto like this for an aquarium must dry overnight for the silicone to gain its final strength. The next morning it can be placed in a pond with the fighters.

All-stone shelter

How to make a grotto for an aquarium from pebbles

Wooden tower

How to make an aquarium house from a coconut shell

Many aquarists are offered ideas for decorating housing for fish using various compositions. This topic is constantly open, as the space for imagination is constantly expanding. The aquarium landscape can be diversified using natural materials and plants. What about coconut?

Coconut in an aquarium is an extremely useful and necessary item that will delight your fish. We can assume that the house for animals is ready, you just need to spend a small amount of money and physical effort. Coconut shells do not rot in water, are easy to process and do not contain harmful impurities. With its help you can make useful crafts with your own hands.

Coconuts are negatively buoyant and have beautiful view, so the fish and crustaceans will be happy. The following aquatic inhabitants will accept coconuts as personal shelter for aquariums:

Small cichlids (Apistogramma, Etroplusus, Lilioupi-lamprologus, Tropheus, Ramirezi, Nanochromis, Palvicachromis and others);
Catfish Loricaridae;
Crayfish and shrimp;
Boots;
Plecostomus, Panaka and Ancistrus.

Coconut shell decorations

How to properly prepare coconuts for finishing

How to make coconut houses

Coconut boat

Preparing coconut for the aquarium

Before placing sawn coconuts for the aquarium, it should be soaked in water for several days (changing the water every 12 hours), after cleaning the inside of any remaining pulp using a hard kitchen sponge or steel wool. After lying in the water for a few more days, it is perfectly cleaned. If you leave the nut in the water or boil it in water for 10 minutes, it will no longer stain the aquarium water, and the material itself will not harm the fish.

There is an opinion that after placing a coconut in an aquarium, the health of the fish worsens. This may be due to the chemicals with which the product was treated before being served on the counter. But during boiling, some microbes and toxins are destroyed, so there are already prerequisites for trust. In addition, few people have come across such low-quality coconuts - commodity experts are well versed in the products.

After all the procedures, the coconuts can be cooled by carefully lowering them to the bottom of the aquarium. You can make a house covered with Java moss - it will look organic and attractive. But keep this in mind: large fish can get stuck in a coconut, so be guided by the size of the aquarium animals.

Coconuts for an aquarium are an excellent decoration that creates the presence of a tropical pond indoors. The small underwater world will delight both the inhabitants of the aquarium and everyone who loves to contemplate it.

Aquarium: DIY design (photo)

Today it is not difficult to implement design solutions turnkey interior and exterior design of aquariums. Modern studios offer the most unusual variations in the artistic design of hidden depths. However, if you wish, you can create your own personal project, making a truly unique aquarium. A do-it-yourself design will allow you to bring any idea to life, making the created underwater world the main element of the interior of the room.

Aquadesign

Aquarium - interior element

Thanks to their unusual beauty, modern aquariums can become a real pearl of any interior. The variety of styles and shapes is simply amazing. Aquariums can be suspended, floor-mounted, or built-in. Diorama aquariums create a stunning effect indoors; their shape seems to promote immersion in the exciting aquatic world. A hand-decorated version improves well-being and lifts your spirits. Today it is not uncommon to even have a dry aquarium. The design, carried out with your own hands, allows you to give yourself an unusual creative concept of a seascape. Many solutions can be created through an incredible flight of creativity. It's definitely simple and incredibly fun!

Types of aquariums

Decorations for the subject environment underwater world serve as a win-win decoration for the aquarium. But the main component interior design is its thriving biosystem.

Aquariums according to their purpose are divided into decorative and special (spawning, selection, nursery, quarantine and others). The most popular of them are species and biotope.

A species aquarium will not only decorate the interior of your home, but will also give you a unique opportunity to observe a certain type of fish or their closely related species. Its inhabitants have a significant influence on the design of the aquarium. It’s not at all difficult to design it with your own hands, but before implementing the idea, you should seriously familiarize yourself with the habits of the selected fish in their natural habitat.

Biotope aquariums reproduce an imitation of any natural biotope with characteristic appearance fish, plants and certain parameters of their usual habitat.

Design styles

For newbies

For beginning naturalists the best option The design of the aquarium will become a collector's style. This perfect option, allowing you to “get your hand.” Absolutely everything is allowed here. You can mix plants, use their artificial imitations, or choose any aquarium. The design, brought to life with your own hands, allows you to create interesting compositions from plants different textures And decorative elements. There is an opportunity to experiment with different storylines. The choice of plants should depend on the theme. To begin with, it is recommended to give preference to unpretentious and hardy plants.

Natural style

Underwater garden

Seawater aquarium

Many people today are passionate about breeding marine fish. It is more difficult to prepare a biological environment for them, especially when using living corals, which are quite demanding on water parameters. But experienced naturalists are quite capable of creating such an aquarium design with their own hands. 200 liters is the optimal average volume for enjoying the contemplation of the underwater world. It should not be overpopulated with living beings, since such a tank has a limited life support system.

It is necessary to design a marine aquarium taking into account its appearance, which not least depends on the inhabitants. These can be predators (sharks, rays, moray eels), non-predatory fish (zebrasoma, angelfish and other species) or corals and invertebrate sea anemones. The most unpretentious are considered predatory fish, invertebrates are more difficult to care for and can die from minor deviations in the chemical parameters of water.

To support the life support of such aquariums, it is worth purchasing expensive equipment. It will need to be decoded, this is worth taking into account when designing an aquarium with your own hands. The photo demonstrates how successfully you can hide all the wires, hoses and tubes, decorating the background with picturesque coral reefs, rocks and shelters for fish in the form of mysterious grottoes and caves.

Aquascape

Aquarium background

A beautiful background for decorating the back wall of an aquarium is easily created using special films on which images of the underwater world are printed. They can also be simply saturated Blue colour, creating the effect of depth and contrast. But it is much more interesting, using your imagination, to think over the background, the size and volume of the tank, the decorations used and include everything in the developed design of the aquarium with your own hands: 250 liters, there is a stone background, spectacular driftwood, stones, moss, various plants - all these elements will be just right By the way.

It is worth noting that the background of an aquarium often gives the entire composition (especially volumetric ones) a unique charm and naturalness aquatic environment. It is not difficult to create it with your own hands, using, for example, foam plastic broken into different pieces, which is glued to the back wall of the aquarium and painted with special paint in intermittent strokes. The result is an excellent imitation of a stone background. It can be made in a similar way, using pieces of bark from driftwood.

The composition can be created from dead coral, stones from a sea reef. In a marine aquarium, small invertebrates, polyps and other inhabitants will find refuge here.

The design of an aquarium, developed and executed with your own hands, allows you to implement a considerable number of excellent ideas for story aquariums using exotic plants, shells, sea pebbles. An incredible number of them can be brought to life by creating your own “rock gardens”. And then enjoy watching bright fish with unusual colors flash against their background.

The main thing is not to overdo it with decorative elements, plants and inhabitants of the aquarium. Everything should be harmoniously combined, give pleasure to its creator and not harm the fish.

Hello, dear aquarists! homemade biofilter Today you will learn how to make a homemade aquarium biofilter. I guarantee a lot of impressions and pleasure from his work. So, let's go! What is a biofilter and what is it used for? Let's start with the fact that in the water, as in the air, a lot of all sorts of rubbish rotates: micro algae, food particles, scales and other suspensions that enter from the outside and pollute the water. A […]

Hello, dear aquarists! bonsai in an aquarium How many of you want your first aquarium to not only work well, but also look amazing? I see, I see: you want everything. Then I will teach you how to make a “bonsai” in an aquarium with your own hands! Do you think this isn't real? Not at all: if you have imagination, straight hands and some necessary ingredients, then success is guaranteed! So, let's go! What […]

Hello, dear aquarists! dropchecker Straight to the point. To begin with, let’s define what a drop checker is. A drop checker is a special miniature device that is designed to monitor the CO2 level in your aquariums. This device looks like a test tube filled with a special indicator liquid. So, we decided on this. Go ahead. In one of my articles I already said that CO2 plays a big […]

Hello, dear aquarists! homemade Ph-test What is Ph? This is an indicator of the acidity of water. IN Everyday life Rarely does anyone test water for acidity. But every self-respecting aquarist is simply obliged to check the water in the tap, since this is what he will use as environment for your fish. How can I do that? On this moment, in specialized stores, special Ph tests are sold. […]

Hello, dear aquarists! quiet aquarium compressor Any aquarist knows that an aquarium compressor is artificial lungs aquarium, because without aeration the water in the aquarium very quickly turns into a swamp. But the aquarium compressor has one nasty feature: it makes a loud noise during operation. And if you turn it on at night, you are guaranteed a sleepless night! Is it possible to do the work [...]