Respite during the day is as necessary as sleep at night. Have a smoke break while working in your summer cottage, sit in the shade after long working days, enjoy the long-awaited evening atmosphere, or even play sports - comfortable wooden benches are used for this.
Buying luxurious furniture for the street - now few people can afford to ruin their wallet. Making a bench with your own hands according to the drawings is a triple benefit:
- A practical product made of wood, in which all individual wishes and elements are taken into account, an order of magnitude higher than stamped factory models focused on saving material. Ordering a bench from a separate craftsman also does not always meet expectations.
- Do-it-yourself production will only require costs for Consumables, and if they already exist, then it will cost you no investment at all.
- Construction of interior and landscape elements It’s hard to call it work for a dacha according to your own taste. It is always a pleasure to skillfully create something new for yourself, so that you can then be proud and enjoy the efforts of your work.
Why made of wood?
Wood is the most suitable material to make a bench with your own hands. This is due to its qualities:
Requirements for material and tools
The wood must be of high quality. For the bench, you should choose elements without knots, cracks, or rotten areas. The ease of processing and joining parts, as well as the service life of the finished product, depend on this.
Special attention: only dry wood is suitable for starting work. A damp board is the reason for the deformation of the bench and its destruction when changing weather conditions. Before processing, the material must be thoroughly dried.
The breed is not limited to anything: to make a garden bench for a summer house, any available wood will do. Oak is the most durable, but heaviest. If you stand on a bench all your life in one place, it is better to choose it.
Pine - optimal choice for any product options. It is the most common building material: wood will be easy to find at home or purchase at the nearest base; affordable, moderately durable, less susceptible to temperature influences. Linden, larch and other species are also used.
Making a bench with your own hands - carpentry work, it will require simple carpentry tools. For safety and quality reasons, it is recommended to use only reliable, working tools. Firmly secured hammer handles, plane blades, a sharpened hacksaw or a high-quality blade on an electric saw are the key to effectively achieving results.
Wooden bench design
The general structure of a wooden bench will be useful for those who decide to make it themselves. Before starting work, it is recommended to make a drawing of the future creation with the dimensions and location of the elements. It will help you quickly make the necessary wooden parts of the bench and correctly assemble them into one garden structure. Each element of the drawing performs its own function, without which the product will be unfinished, unreliable or not convenient enough:
- The legs of the bench are supports. For comfortable planting, they are brought to a height of 40-50 cm from the ground. A lower or higher position forces you to take an unnatural posture, from which rest becomes torture and unfavorable tension on the spine. Depending on the length, wooden benches are provided different quantities elements: maximum every 150 cm. Rear and front supports are at the same level with each other. Usually two pairs are needed as most wooden benches have small dimensions.
- Between the legs and seats of the bench, the diagrams provide for intermediate transverse and longitudinal beams, because the plane of the seat is not always formed by one board. They must be attached around the perimeter of the seat to the tops of the legs, but if the distance is large, there may be additional transverse elements attached to the longitudinal beams. Intermediate wooden supports may be absent only if the bench seat is made of wide boards.
- The seat is formed from elements nailed to the intermediate beams and extending 5-25 cm beyond the legs. It is recommended to choose even boards.
- The screed is an element of the strength of the bench. In the drawings it can be made in different forms, but the function is the same: rigid fastening wooden frame. This can be one beam or board, the ends connected to the legs of the bench at a height of 20-30 cm, or corner bars connecting each leg with intermediate beams. The screed prevents the wooden supports from loosening.
- The back is a functional element that divides all benches into two configurations: with and without it. It serves for greater comfort and relaxation of the back. The back should not be vertical at 90° - this is an uncomfortable position. Optimal angle tilt from the seat plane - 110-120°. The presence of a backrest requires modernization of the drawing of the legs. The support area needs to be larger. Geometrically, the load is distributed across the seat and the horizontal projection of the backrest. The back legs of a wooden bench are moved further from the middle or tilted so that the lower points go back. The back consists of supports and a plane. The first ones are attached to the legs at an angle, and boards or slats are attached to them.
General manufacturing principles
Assembly wooden parts benches are made using screws or nails. The second option is recommended. High-quality long nails will provide a stronger connection, while soft modern self-tapping screws often break and over time may no longer hold the rigidity of a wooden frame.
The wooden surfaces of the seat and back must be carefully sanded. The functional planes of the bench can be different shapes: straight or curved to add beauty and greater comfort. For example, the back of the seat can be made in the shape of a boat, and the edges of the seat and back are rounded. The result is achieved by changing the shape of the transverse beams in the drawing (the upper edges are cut out with a wave).
In order to save material and time, you can often find benches where there are gaps between the slats in the seat and back. A simple example: city alleys. This is not inconvenient and, in general, practical, but it is recommended to avoid such savings when making it yourself. A solid garden bench made of wood with full-fledged elements is more beautiful and safer for health. The spaces between the seat and back act as draft windows: after sitting on a bench, an unseasoned person can get sick.
The order of assembly is not determined by anything. If the seats and backrests consist of many slats, it is recommended to first make and fasten the frame elements and screed according to the drawing, and then form the planes. If there is no backrest, and the surface of the bench is one large and strong board, it is advisable to use it as a basis for connecting the remaining elements.
Wood processing is a mandatory process. Immediately after making the bench, it is necessary to impregnate the wood with protection against insects and fungi. Further painting will not only give the wood product a finished look, but will also protect it from external weather influences.
Decorative value
Those who say that there is no beauty in wooden benches simply have no taste. This is one of the landscape and interior elements that form general form cottages or premises. Recreation areas primarily attract the attention of visitors and the owners themselves. That's why beautiful products made from wood, made with your own hands - this is wealth for the home and soul.
Experienced craftsmen, designers and creative newcomers often surprise with their unique solutions. When using seemingly the most inappropriate wooden elements– knotty logs, stumps, old driftwood create masterpieces that people are proud of and admire. Only individual approach to making benches with your own hands will help make your summer cottage unusual and pleasant.
Application of products
The bench is an ambiguous element. Application finished products applies to both the dacha plot and living conditions, and for specific needs. Some of its structural features during manufacture depend on where the wooden bench will be used.
The most popular garden bench is because it is necessary in any garden yard. The version without a backrest is characterized by the presence of only the seat surface; there is no element of vertical back support. Such a bench for a summer house is less convenient, but it is easier to make it with your own hands according to the drawings.
The option without a backrest is chosen by those who do not like to sit still for a long time: a couple of minutes of respite and then back to work. The light weight of the product and simple load distribution allow the use of thin wooden or even 2 metal legs. for a summer residence it is more attractive, convenient, but more difficult to manufacture.
A beautiful and comfortable bench can be placed on the porch of the house, in a gazebo or indoors, where it will play the role of a full-fledged wooden furniture. Benches designed for this purpose are often supplemented with soft material: the backs and seats are covered with a blanket or bedspread, upholstered with leatherette on cotton wool or foam rubber, faux fur, etc.
For sports needs (for example, for training with dumbbells) wooden bench without back – great option benefit. The optimal surface covering for the seat is linoleum with lining.
No one will argue that a bench is simply a necessary attribute for any summer cottage. There are a great many types of garden benches, but in this article we will look at a very simple one. classic version benches designed for 2 people, which is not difficult to make with your own hands. The bench should be strong and not heavy; it can be easily moved by two people to any place on the site.
Below you will find a working 3D model of this bench, which can be rotated in all directions, as well as drawings of the bench parts from which it will be assembled.
So what do we need?
Since you will be doing it yourself, you need to stock up on the following tools and materials:
Tools
- Circular saw (you can get by with a simple hacksaw for wood).
- Planer (if you use unplaned boards).
- Drill or screwdriver (with drills and bits).
- Measuring tool (tape and corner).
- Wrench.
- Paint brush.
- A grinder or hacksaw for cutting a threaded rod to size.
Materials
- Edged board 100*40 mm.
- Edged board 100*25 mm.
- Furniture screws or threaded rod with a diameter of 8-10 mm:
- Nuts and washers for the selected screw size.
- Self-tapping screws with a countersunk head for fastening the elements of the back and seat of the bench.
- Self-tapping screws with a turnkey head for fastening the power strut - 4 pcs.
- Abrasive sandpaper (you can use a drill attachment, or ideally use a surface grinder).
- Protective impregnation for wood.
- Wood putty for sealing screw heads.
After all the elements of the future garden bench will be sawed and planed, you can start assembling it yourself. And below are her isometric drawings with dimensions.
BY SIZES:
I adapted the model of this bench to the sizes that are often found in lumber at our sawmills, but this nasty but is always present. When preparing parts, rely on the main (overall) dimensions, because unplaned material can have a spread of up to 5-8 mm. Accordingly, you will have to make adjustments to the dimensions of your structure.
Drawing of a garden bench made of wood 1400 mm wide.
Assembling a garden bench
- Assembling the sides of the bench.
We drill holes for threaded connections. You can make a hole in the wood with a special drill if you want to recess the caps and nuts. To make it easier to work, you can first fix the entire structure of the side of the bench with clamps or thin nails (screws). - We secure the sidewall structure with screws and nuts (a washer should be placed under the bolt head and nut). Do not tighten too much right away; you may have to move the entire structure further for better stability.
- We perform the same operation with the second sidewall.
- Connect the two sides of the bench using a spacer-tension element (below).
Secure it with large self-tapping screws. - Secure the seat and back elements with self-tapping screws using a screwdriver. The gap according to the drawing between the boards is 5 mm (use, for example, nails or screws of appropriate thickness as a spacer).
- Tighten all threaded connections.
- Apply wood putty to all recessed heads of the screws securing the seat and back of the bench.
- Sand all over with abrasive sandpaper wooden surfaces so as not to plant a splinter and smooth out the putty. All external corners can be rounded.
- Apply protective impregnation or paint to all surfaces in two layers with intermediate drying.
- Voila! After drying, the DIY garden bench is ready for installation.
- Lumber dimensions are nominal. When purchasing boards, add at least 10% to the total footage for possible losses.
- To save lumber, start cutting boards with the longest elements.
- The width of the garden bench can be made at your discretion, just keep in mind that a larger width will cause the seat boards to sag under the weight of the body and the structure will have to be strengthened.
- Whether to install the bottom board of the bench back is at your discretion.
- To minimize accidental bruises and injuries, file or cut off all sharp corners of the seat and backrest elements.
- If lumber is used to make a garden bench natural humidity(not dried), then the dimensions and gaps may change during drying and it is better not to varnish it until the wood is completely dry.
3D model of a garden bench
Click on the picture, wait for it to load and use the pressed button left button mouse to rotate the model. Rotate the mouse wheel to zoom in and out. Watch full screen - icon in the lower right corner. Exit full screen - Esc key.
To fully view 3D models, you need to download the SkethUp viewer program from the official website (free) and install it on your computer. You can download this model for viewing by clicking on the logo in the lower left corner of the viewing window.
Drawing: bench details
This figure shows a diagram with the number of parts and main dimensions.
Examples of similar garden benches
A similar bench with a lighter backrest on one board. As an option for weight loss.
And here is a variant of a bench with a rear shelf on the back. Moreover, the author did correct angle on the backrest reinforcements at the top, and the shelf turned out to be in the correct plane.
The same option with a rear shelf on the back. But here the author did not make the right angle, and the shelf turned out to be littered.
Please note that here, 4 boards are also used on the seat, and 3 on the back. The elements of the bench are varnished.
In the photo below you see a whole ensemble of three benches. Quite a good idea for a relaxation corner on the site. But it seems to me that the long bench should have been strengthened in the middle, otherwise a sag appears, which is what I wrote about above.
With that, thank you for your attention, I was glad if it helped someone. Post your options for made garden benches below in the comments or send them to me by email.
About how to make a large stationary and heavy one garden bench, you can read in another article: “Garden bench with back and armrests”, drawings and dimensions are attached.
If you want to purchase a ready-made garden bench, we advise you to contact a trusted furniture seller Kupistol, they offer a wide range to suit every taste and budget.
Among the small architectural forms The most common are benches and benches. Can be made from any materials or combinations thereof: wood, metal, stone, concrete, plastic, glass.
They are everywhere: streets and city squares, parks and squares, sports and educational establishments, public institutions and residential premises. Almost mandatory element landscape design, plot of a private house or cottage.
The easiest material to process and affordable is wood. Do-it-yourself wooden benches provide an opportunity to save money, demonstrate your craftsmanship at home and be a creator.
Wooden benches: economy option
Make wooden benches using existing “blanks”. It is enough to process it a little and assemble a strong and functional structure - with a seat, back and legs.
Moreover, such “modules” are inexpensive, sometimes purchased for “pennies.” It's about about pallets or pallets.
But not everyone is suitable for the device garden furniture. You should not use products made from off-grade or unedged boards. In the first case, large knots may fall out, in the second, the “aesthetic” qualities suffer.
There are cases where the board fastening step is clearly not suitable for a bench.
The pallet is a wonderful donor for a bench
A pallet, as in the photo, would be better. With a corner chamfer removed along the contour.
The width of the pallet is large for bench seating. It needs to be trimmed, the remainder can be used to construct the backrest.
If the width of the backrest is not enough, then the bench will have to be made from two pallets.
The seats and backrest are part of the structure. Need legs. Let's make pallets from the board itself.
- the bench may not be stable
Rigidity is ensured by the seat, and the mounting area of the legs is quite small. Usually a lower ligament is added so that they do not “spread apart”. A simpler option is to use another pallet (or rather part of it) as a base.
Pallet benches
or two. Do-it-yourself benches and benches made of wood in detail and clearly.
Fixing the backrest, as can be seen from the examples, can be done using a pair of slats, a board, a rope or rope. The assembled bench, its surface is cleaned, sanded, varnished or painted.
You can not cut the pallets to width and make a garden sofa.
There are examples of using pallet boards to make benches and other products from the class of small architectural forms. Flowerpots are also taken in the photo.
It is not necessary to waste time disassembling pallets, but it is better to buy standard lumber.
Simple bench shapes: board and timber
There are designs and execution options - from the simplest to specimens with wood carvings, worthy of being called real works of applied art.
The easiest option for making is a wooden bench without a back.
The drawing shows a do-it-yourself wooden bench, made entirely of boards with a thickness of 75 mm.
Bench made of boards and timber
Each element consists of two parts.
The seat with beveled ends is assembled from two boards. If the bench stands on open area or outside a heated room, it is better to provide a gap. It will allow water to drain and compensate for wood swelling.
The leg consists of two glued elements. To ensure reliability of the end connection, a pin (dowel) is inserted. Two short support beams and seat fastenings are attached to the leg. The legs and beams are connected with grooves, fixed with glue and self-tapping screws. IN assembled form the leg and beam are attached to the seat board with two pairs of screws and dowels, holes are drilled for them in advance.
Benches: assembly order
1. Cut out the workpiece;
2. Process the ends and clean the surfaces for gluing;
3. Glue the legs together;
4. Beams are attached to them;
5. Assembling the shop;
6. Sanded and coated with varnish (or paint).
Images and drawings of a bench made of 30 mm boards with a support beam.
Bench made of 30 mm boards with a support beam
There are already shaped elements in the form of legs with radius cutouts. You can make the work easier and make them rectangular. The drawing is not a dogma - it can be taken as a basis and changed in the direction of simplification or in the direction of complication. They do the same with sizes - make the bench wider, shorter, etc.
What is the difference between this option and the previous one?
One long support beam is used instead of four short ones; it also serves as a stiffening rib for the base - the legs and the entire structure are more stable. The connection between the legs and the beam goes through a tongue and groove, and the tenon is much easier to cut out. That is, this form is a little easier to manufacture, more stable and provides more opportunities for experimentation.
Below are several options for a similar design, but in a different design.
For example, in the minimalist style - there are not even protruding edges. Splicing according to the tongue-and-groove principle is used to connect the legs and the seat.
In this model, they simplified the task as much as possible - they even abandoned cutting out grooves and tenons. In this case, it is better to make the connection between the legs and the beam using confirmations rather than self-tapping screws (they have larger area contact). For strength, they usually add a pair of dowels on each side, set with glue. Hidden mount the seats are made on a dowel, the open seats are made on a self-tapping screw.
If the bench is not very long, then the beam can be placed at the bottom. In this design, it serves solely as a stiffener.
In the photo below you can see an unusual case of using a dowel - it attaches the beam to the legs not with a hidden installation, but with an open one.
In this bench, a block was used to “help” the board.
Legs with crossbars and two oblique supports for sitting are made from it. All fastenings are made on confirmations, and the bars of the legs are connected to each other using grooves.
Here also a block is used for the base. Due to the large thickness of the seat board, it does not require additional support. The lower beam serves as a stiffener.
Making a small bench with a back is not much more difficult. The installation principle and fasteners are similar simple shops: grooves, tenons, dowels, glue, screws and confirmations.
You can take a design with “solid” board legs as a basis. Move them a little from the center to the edge so that the ends of the seat and legs are in the same plane. Attach vertical beams to the legs and screw the backrest to them.
Bench with carved back
For a model whose base is made of a block, making the back is even easier. Two pairs of legs: front - for supporting the seat, rear (high) - for attaching the supporting beam, seat and back.
These were lightweight and “mobile” designs of benches and benches made of wood, which could be used with equal success in an open area, under a canopy or indoors. There are more massive forms aimed at “stationary” placement.
Benches: large format
Making a wooden bench with your own hands for a summer residence involves using any form of material. Including those that are used in the construction of wooden houses.
For example, timber. For reference: timber is classified as such if the aspect ratio is no more than 1:2, and the smaller side has a size of 100 mm or more. Reducing the size transfers such lumber to the “block” category.
It is not easy to assemble a bench like the one in this photo with your own hands, but it is possible.
Assembling the legs is not difficult at all. The only difference from a board and a block is that more powerful fasteners will be required. For example, such self-tapping bolts for wood.
You will have to widen the hole under their head (but confirmations also require this) and place a washer.
Installation and installation of the seat is much more difficult.
To “bundle” the timber together you need three metal studs, with a length almost the width of the seat, and two - the width of the bench, taking into account the legs. It’s difficult to find these on sale - you’ll have to make them from round reinforcement (stainless steel). The gap between the beams can be maintained using wooden plates from boards strung on studs. The thickness of the plates should be the same as the three supporting ones vertical beams that support the seat in the center of the bench.
And this specimen is made of even more powerful timber (150×100). Its assembly is much simpler. Two seat beams are attached from below through short cross beams, which are then mounted to the T-shaped legs.
Bench made of timber
Another easy-to-follow example using a large-format board. The load-bearing capacity of the material is such that the use of reinforcing beams is not required - the seat is attached to the ends of the short legs. The author of the project knows well that the toughest geometric figure- triangle. Therefore, both the configuration of the lower part of the supports and their connection with each other with bolts has the shape of an equilateral triangle.
If possible, order two non-standard wooden beams, then making such a bench with your own hands will not be difficult: you will need to “add” four short timber(100×100) for the legs and two bars (100×50) for the back.
Timber bench
But if there is no such possibility, then instead non-standard timber you can use a couple of standard ones.
This DIY wooden garden bench uses logs.
The most difficult thing in this option is to use an ax (or adze) to make a longitudinal groove and tenon for connecting the logs. For reliable fixation, you will need a couple more dowels on each side (this is the same dowel, but only thicker and longer). The seat and back can be made of boards (as in the photo) or timber. Do-it-yourself benches and benches made of wood - ideas and solutions.
And this version of the bench is already more complicated.
But not really. The main difficulty is making the back, or rather the notch on it. All fastenings of parts of the structure to each other are carried out using dowels.
Basically, like this wooden fastener quite durable - log houses with a couple of floors (including wooden churches) were previously built without a single nail.
And a very simple option: two logs with a groove and half a log sawn lengthwise.
Bench simplicity perfection
Wooden bench
In conclusion, here are a couple of examples of how you can make a bench from wood, not purchased wood, but found in a nearby planting or forest. Benches and benches made of wood with your own hands from auxiliary materials.
In this example, only the seat is made of boards, everything else is made of natural material, which had to be selected according to thickness and adjusted to size.
To make the seat of such a bench, you need a professional tool, so you will have to either order longitudinal sawing of a log, or (which is easier) take an unedged board as a blank.
Information to note : , .
When you visit the Casino X official website for the first time, you will definitely remember this platform by its unique design And large selection promotional offers. Experienced gamblers who know a lot about gaming software are happy to become guests of the resource. There is everything you need for a comfortable game: licensed machines, bonuses, high level service. This is a serious long-term project that is successfully advertised on the Internet and provides a real opportunity not only to hit the jackpot, but also to withdraw your well-deserved winnings without any difficulties.
Virtual slot machines from Casino X of all genres
All professional resources that review Casino X note its very impressive range of games. More than 450 slots from more than 30 providers await you. The main part consists of developments from Netent and Microgaming. Basically, these are five-reel simulators of various genres: fantasy, history, stories from films and legends, fictional stories, sports, animals, treasures and, of course, fruit classics. For convenience, the top online slot machines are collected in a special section. Interesting game mechanics await you:
- free spins;
- cash bonuses;
- multiplication of rewards;
- Special symbols;
- accumulators and multipliers.
Claim your bonus!
The web resource also pays attention to tabletop entertainment and the Live category. To switch to paid bets, you need to create a profile in the system. Once the quick registration is completed, the player can top up his account. Immediately after this, you can start playing on the most popular slot machines. Most of the devices are adapted for gadgets with touch controls. On your smartphone Casino X mobile version slightly different from the format on a computer. There are no functional differences: you manage your bank and bets in the same way as on a personal computer.
Free game mode at Casino X online
Club clients do not have to look for where to download machines for constant access to demos. The browser version of the portal works around the clock, as does its technical support. The site is occasionally updated to better meet current quality standards. All guests of Casino X can play for free without registration under one condition - connecting a smartphone, tablet or computer to the Internet. Just click on the video slot you are interested in and start test game in demo coins. The results of such spins or bets at the roulette or poker table will not affect the real balance in any way.
Unlimited access to Casino X official website
If for some reason Casino X full version does not open at your usual address - this problem is easily solved thanks to alternative copies. For every client and ordinary guest, a mirror today serves as the most in a convenient way log into your account and go to the page with slot machines. The same licensed software with a full guarantee of specific algorithms awaits you. You will never lose your status and balance, since additional addresses with a similar interface and bonus features are constantly being added to the network.
At the dacha we take a break from everyday worries, merge with nature, contemplate, and relax. In anticipation of the coming summer season the site offers a selection of ideas for wooden benches that you can make with your own hands or order from craftsmen.
It will be enough to simply print out the bench you like and show it to a specialist. This is quite enough, since a person who knows his business, even from a sketch, is able to understand what is required of him. So, let's see what is now in the assortment of country decorators...
A good quality classic wooden bench with a backrest. The photo clearly shows the design, which boards were used for the work. How the node elements are fastened.
Simple DIY bench
A simple bench made of boards and a metal base. This is probably one of the most simple designs. Such a wooden bench can be made with your own hands in literally one hour.
DIY board bench
Modern bench made from boards made by yourself. Pay attention to the tenon joint. From the inside, the bench should be additionally secured in the corner with a beam mounted on glue and screws so that the structure does not “walk.”
Wooden bench made of planks
Another idea for a similar connection. Only here the shortcomings have already been taken into account previous version. This bench is extremely stable and reliable. The legs are made of 100x50 mm boards, with 100x25 mm jumpers, the bench seat is made of 100x50 mm boards.
DIY wooden bench chaise longue
Wooden bench chaise longue. If you make a more gentle slope, you can rest reclining. The structure of the bench is made of thick plywood, cut with a jigsaw. For stability, three vertical posts are made.
DIY bench around a tree trunk
Bench around a tree trunk. Do it generously, as the trunk will become thicker over time.
DIY bench with armrests made from pallets
Bench with armrests made of pallets. After construction, a fair amount of this material remains, so it can be put to use.
Set of table and benches made of iron frame
Set of table and benches made of iron frame. If you know how to weld, then by purchasing a metal channel, you can easily make a reliable set for outdoor gatherings with your own hands.
A simple bench made from wood cuts and boards
A simple do-it-yourself bench made from wood cuts and boards. For one summer season, or for reception large quantity guests. Such benches are common in villages; often, driving through the village, you can see such structures near houses.
Small wooden country bench
A small wooden country bench. On such a bench you can weed the beds or work in the flower garden, near the flower bed.
A bench made from a cut of dense wood. This is already a work of art - such masterpieces are worth big money. I have seen such exotic benches in Asian countries - they are held in high esteem there.
Bench with a drawer and tray for things or toys. It will require a certain skill from you during construction, but it will also serve, among other things, as storage.
A decorative bench made of slats is very airy and light.
Rustic bench made from half logs. It will look good in the lap of nature! If you have a forest nearby at your dacha, then you can easily find dry logs that you can split into an exclusive garden bench.
A swing made from crooked trunks. Very decorative and stylish!
A bench decorated with a cart wheel. The design is complex, I’m giving it just for beauty.
A bench made of thick boards with an animal figurine. If you put such a bench in front of the house, on the street side, then there will probably be people who want to take a photo while sitting on it.
Option from dies and crooked tree trunks. A bench for lovers of natural forms.
A bench made from half logs, taken in one of the city parks.
Bench - pergola. The vines are skillfully incorporated into the design of the structure.
A bench made from a cross-cut tree. I understand that it’s unlikely to be possible to make such a cut yourself, without using expensive equipment, but the idea is very original.
A bench made of bamboo with a hanging seat made of thin planks tied with strong rope.
A do-it-yourself bench made of boards and timber is also a very easy-to-make design.
Family bench with table for a large family.
Do-it-yourself massive wooden benches
Massive benches and a table made of wood. The boards are treated in such a way that they look as if they have been doused with water in the sea.
Classic bench sofa.
Rustic furniture is very popular among Western homeowners. The most difficult thing in such things is collecting branches that match the curvature.
A simple bench made from half a log. The legs are made in the form of bast shoes.
Collect your cut tree trunks and branches and use them to create decorative furniture. In a couple of filing seasons fruit trees You can accumulate material for a bench or bench.
An example of a rocking sofa. A good option For summer holiday in the country.
An interesting “double” version of a bench - chair.
Bench with cabinets and flowerpots on them.
Round wooden bench around a tree. The seat elements are made of thick plywood, which made it possible to make the bench round in shape.
Fun DIY bench made from boards and logs
A cheerful bench made of boards and logs. Very simple idea, the main thing is to paint everything brighter and write something original.
A very rich bench - a swing... All that remains is to lick your lips!
Like these ones original ideas DIY wooden benches and benches. This, of course, is not all! There are a lot of ideas around, the main thing is to capture the beauty in the photo, and then implement it on your site!