Dry plaster mixture "Knauf MN Start" based on gypsum binder with polymer additives is intended for machine plastering of walls indoors with normal humidity, including kitchens and bathrooms (SNiP II-3-79*).
Scope of application of gypsum plaster "Knauf MN Start":
Gypsum plaster can be applied to all common solid substrates ( brickwork, cement plaster, concrete, etc.), as well as on surfaces made of polystyrene foam and DSP.
Consumption of plaster "Knauf MN Start":
To plaster 1 m2 of a 10 mm thick surface (excluding losses), about 10 kg of dry plaster mixture (~ 10 kg/m2) is required.
Advantages of gypsum plaster "Knauf MN Start":
Increased productivity - 3-4 times higher compared to manual application.
Does not crack even with a thick layer.
Consumption gypsum plaster"Knauf MN Start" is 2 times smaller than traditional cement-sand plaster mixtures.
Application of a plaster layer up to 30 mm thick in one stroke without preliminary spraying. If necessary, thicker layers can be applied in two coats.
High water-holding capacity - the mortar mixture does not separate and does not dehydrate even on porous substrates that absorb moisture well and at elevated temperatures.
Regulates humidity conditions indoors - “breathes”, creating a favorable indoor microclimate.
The material is made from environmentally friendly natural mineral (gypsum) and does not contain substances harmful to human health.
MN_START_Infolist_(Press)_CS6_preview (213.32kb)
Designed for plastering walls and ceilings indoors by machine using plastering machines, for example, PFT G5, PFT G4.
Apply to all common hard substrates (brickwork, cement plaster, concrete, etc.).
- High productivity - 3-4 times more compared to manual application.
- Does not crack even with a thick layer.
- The consumption of KNAUF-MN Start gypsum plaster is almost 2 times less than traditional cement-sand plaster mixtures.
- Application of a plaster layer up to 30 mm thick in one stroke without preliminary spraying. If necessary, thicker layers can be applied in two coats.
- High water-holding capacity - the mortar mixture does not separate and does not dehydrate even on porous substrates that absorb moisture well and at elevated temperatures.
- Regulates the humidity in the room - “breathes”, creating a favorable microclimate in the room.
- The material is made from environmentally friendly natural mineral (gypsum) and does not contain substances harmful to human health.
Dry plaster mixture based on gypsum binder with polymer additives.
Application area:
KNAUF-MN START plaster is intended for plastering indoor walls by machine using plastering machines, for example, PFT G5, PFT G4.
The mixture fits well on solid substrates (brickwork, cement plaster, concrete, etc.).
KNAUF-MN START can be used for finishing rooms with normal humidity, as well as in kitchens and bathrooms with a coating that provides protection against moisture.
Suitable for interior work.
Advantages:
- High productivity - 3-4 times more compared to manual application.
- Does not crack even with a thick layer.
- The consumption of KNAUF-MN Start gypsum plaster is almost 2 times less than traditional cement-sand plaster mixtures.
- Application of a plaster layer up to 30 mm thick in one stroke without preliminary spraying. If necessary, it is possible to apply thicker layers in two times.
- High water-holding capacity - the mortar mixture does not delaminate and does not dehydrate even on porous, well-absorbing substrates and at elevated temperatures.
- Regulates humidity - the surface “breathes”, creating a favorable microclimate in the room.
- The material is made from environmentally friendly natural mineral (gypsum) and does not contain substances harmful to human health.
Main characteristics
White color
Variety of Plaster
Warehouse Moscow
Gypsum base
Types of internal work
Application temperature, °C: from +5 to +30
Application areaHouses, frame house, apartments, partitions
Frost resistance F 35
Product type: leveling
Applying a second layer 1 day
Viability of solution: 60-90 min
Base materialbrick, blocks, concrete
Season of application summer
Weight 1 piece, kg 30
Drying time 7 days
Consumption for a layer thickness of 10 mm: 10 kg/m2
Designed for plastering indoor walls by machine using plastering machines, for example, PFT G5, PFT G4. Apply to all common hard substrates (brickwork, cement plaster, concrete, etc.). Advantages: High productivity - 3-4 times more compared to manual application. Does not crack even with a thick layer. The consumption of KNAUF-MN Start gypsum plaster is almost 2 times less than traditional cement-sand plaster mixtures. Application of a plaster layer up to 30 mm thick in one stroke without preliminary spraying. If necessary, thicker layers can be applied in two coats. High water-holding capacity - the mortar mixture does not delaminate and does not dehydrate even on porous, well-absorbing substrates and at elevated temperatures. Regulates the humidity in the room - “breathes”, creating a favorable microclimate in the room. The material is made from environmentally friendly natural mineral (gypsum) and does not contain harmful substances.
Pickup from a warehouse in Moscow
If you need a small batch of goods (from 1 piece), and the goods are in stock, you can quickly purchase the goods at one of the retail outlets:
Delivery to site and unloading
We will deliver any required amount goods at a time convenient for you directly to the construction site. The cost of delivery depends on the volume of the order and the distance of the facility from the manufacturing plant or warehouse. The unloading rate for light-duty vehicles is 30 minutes, for medium- and large-tonnage vehicles – up to 1 hour.
The Kirpich.ru company has its own vehicles and can offer customers the most favorable and convenient conditions for the delivery of goods on vehicles of various carrying capacity (from 9 to 20 tons), including those equipped with a crane. To calculate the cost and delivery time, please contact our managers by phone +7 495 369-33-88 from 9 to 21.
You can find out more about delivery terms on the page
Dry building mixtures used not only by professional builders, but also by those who rarely pick up a spatula. Start plaster is often used to treat residential premises, hospitals and other buildings with normal humidity.
The Knauf Start universal mixture is designed for plastering walls. Buildings where it can be used this product, must have normal humidity, the walls of kitchens and bathrooms in residential areas can also be treated with the mentioned building material.
Knauf XP Start gypsum plaster is incredibly easy to use; it is necessary for leveling walls before finishing manually. It consists of gypsum, polymer additives and special fillers. The dry mixture, after preparation for work, has an elastic structure, it can be applied in 1 layer at a thickness of 1-2 cm. The hp start mixture is not harmful to the skin, does not cause irritation, because created from environmentally friendly natural materials.
The advantages of the product include wear resistance, optimal timing drying, in addition, this composition is able to regulate the temperature and humidity conditions in the room. Start gypsum composition can be used after dilution for 40 minutes. The cost of gypsum mixture start nr is 2 times less than traditional sand-cement plaster.
The product described is equipped water holding capacity, the composition does not delaminate on walls, does not dehydrate on porous, highly absorbent surfaces.
Preparing surfaces for work and preparing the mixture
Walls that can be treated with this mixture must consist of concrete, brick, aerated blocks, they can be plastered with cement or gypsum composition. Any base must first be cleaned of dirt and dust, and obvious unevenness must be eliminated. Walls made of concrete, brick and other materials are pre-treated with a primer designed for the corresponding material.
The gypsum joint is loosened cold water, 30 kg of dry plaster will require 18 liters of liquid. The finished composition for initial surface treatment should not contain lumps or foreign inclusions. You can work with the solution at a temperature not lower than +5º. The minimum layer of starting plaster can be 3-5 mm, maximum 30 mm. If the layer of the composition is expected to be more than 15 mm, it should be applied twice. The starting time for complete drying of the plaster with a layer thickness of 10 mm is 5-7 days.