Recently, it has become quite fashionable to make various crafts for the home with your own hands. For these purposes, you can use various available tools and materials. The creation of lighting fixtures gives a lot of scope for creativity.
Today you can find original ideas for creating any lamp. In today's article we will try to describe in detail a master class on how to create hanging lamp with your own hands.
The variety of shapes and sizes in this situation frees up your hands, because such a device can be made from any available materials. Exactly this issue and our master class will be dedicated.
Benefits of suspension
A pendant lamp for the ceiling can be found in almost every home today. Often its role is played by a chandelier, which is placed in the center of the room. They have the following advantages:
- provide sufficient lighting;
- fit into any interior and room design;
- are an additional decorative element;
- installation is carried out in different ways and can be done by hand.
It’s worth talking separately about what kind of installation of such lamps on the ceiling is even possible. Most often this type lighting fixture attached to a special hook. In modern suspended ceiling structures, this hook is hidden under finishing material or stretch fabric.
In a situation where the ceiling is ordinary, then installing the lamp involves additional decoration of the mounting location.
Device design
A pendant lighting fixture, which you can make yourself, must have the following design elements:
- lampshade. He will fulfill protective function and protect the light source from mechanical damage;
Note! After the installation of the device is completed, its lampshade should be directed in the opposite direction from the ceiling. This will significantly improve the level of illumination in the room.
Today's master class will allow you to make any type of underseeding lighting device with your own hands. So let's get started.
Before making a lamp for the ceiling, you need to consider the following parameters:
- product power. This is the main indicator, which is determined by the lighting standards adopted for a particular room;
- number of lampshades;
Note! For small room A chandelier with one lampshade is suitable, but for a large room 2-3 lampshades, or maybe more, are suitable.
- the height at which a homemade lighting fixture should be hung. This parameter depends on the height of the ceiling in the room. An excellent solution would be the ability to adjust the height using special devices;
- simplicity and maintenance of the device.
Not every master class will indicate the need to take these parameters into account when assembling a homemade lamp. But it is necessary to emphasize this.
In addition, it is important to evaluate the purpose of the room. For example, large chandeliers will be good for living rooms, and smaller chandeliers for kitchens. But for a child’s room, bright and non-standard chandeliers are suitable, which will be placed almost under the ceiling, in order to avoid damage to the device when playing ball or other active children’s games.
Chandelier in the nursery
One more important point The choice is the design style. The lamp must be in harmony with the rest of the room.
In addition, considerable attention should be paid to the shape of the chandelier. The right approach for assembling pendant lamps will allow you to make your own chandelier that will fit matte, glossy stretch and plasterboard ceilings. Moreover, its shape, depending on the chosen design style of the room, can be:
- spherical;
- conical;
- cubic;
- non-geometric. For example, a chandelier can look like a path of flickering lights.
Our master class will help you make your own ceiling lighting fixture from scrap materials, taking into account the above recommendations.
Getting ready for work
The assembly of a chandelier for the ceiling can be made from a wide variety of materials:
- bamboo blinds. They can be replaced with ordinary wooden sticks;
- dye. It is better to use a spray can to apply it evenly;
- clothespins or clips;
- base from an old lamp;
- light source (light bulb);
- glue for working with wood.
In addition, to decorate a chandelier, you can use various available means: beads, appliques made of colored paper, small Stuffed Toys, satin ribbons, etc.
In addition, you will need ordinary scissors and brushes to carefully apply glue to the elements of a homemade lighting fixture.
As you can see, all materials and tools for making a pendant lamp can be easily found at home.
How to do
Wood lampshade
To make a chandelier for the ceiling with your own hands from the above materials, you must follow the assembly instructions:
- wooden elements it should be treated from all existing chips so as not to drive splinters into your hands. To do this, we sand the wood;
- after this, in order to protect the wooden elements from negative influence humidity and temperature changes, they must be coated with a special varnish. Using bamboo sticks these steps can be skipped;
- then, using glue, we attach the wooden elements to each other, thus drawing out the geometric shape of the lampshade we need. The simplest shape is a cube. To create it, you can even use immediately assembled planks, which will play the role of the edges of the figure;
Note! In one of the faces it is necessary to make a preliminary hole for the light bulb. It can be cut using a jigsaw or drill with special nozzle. You can also individual elements bamboo or wooden sticks position in such a way as to form the required hole.
The lampshade itself, as well as the hanging mounting device, can be additionally decorated with decorative elements. The entire assembly process, if you strictly follow the instructions, will go quickly and without problems. This concludes our master class. Now you know the secrets of how to make such an irresistible thing yourself!
With the help of such a lighting device you can make the interior of any room more original and unique. And at the same time, you will save enough money that you would spend on buying a factory lamp.
Installation secrets spotlights V suspended ceiling: How difficult is it?
Introduction to the world of ground lamps - review, installation yourself
For all chandeliers, except glass ones, it is better to choose LED bulbs. They heat up less during use.
CBC Life YouTube channelWhat do you need
- Yarn;
- small photo frame;
- scissors;
- 3 sets of wooden hoops of different diameters;
- 3 identical short and 1 long metal chains;
- pliers;
- bulb;
- lamp pendant.
How to do
1. Wrap the yarn around the photo frame many times and cut. Take a small piece of thread and tie it on top of the yarn so that the ends remain. Cut the threads on one side, where the frame hole is located.
CBC Life YouTube channel 2. Remove the yarn from the frame and fold it in half. Place the knotted thread in the middle so that its ends are at the bottom and the loop is at the top. Details are in the video below. Cut another piece of thread and use it to tie a tassel just below the loop.
CBC Life YouTube channel 3. Make the rest of the tassels in the same way. The quantity depends on the diameter of the hoop. The threads should frame them tightly.
CBC Life YouTube channel 4. Remove the center hoops from all hoops - you won't need them. Open the large hoop and put some of the tassels on them by the loops.
CBC Life YouTube channel 5. Close the large hoop. Place the tassels on the rest in the same way.
CBC Life YouTube channel 6. Make nine pieces of thread. Place the middle hoop into the large one and tie them in three places at the same distance from each other.
CBC Life YouTube channel 7. Place a small hoop inside and tie it to the middle one in three places. These threads should be located approximately in the middle between those that connect the large and medium ones.
CBC Life YouTube channel 8. Turn the design over and straighten the tassels. Tie short chains to a large hoop at equal distances from each other.
CBC Life YouTube channel 9. Use pliers to open the end link of the long chain. Place the attached chains on it and close it.
CBC Life YouTube channel 10. Attach the pendant to the ceiling, screw in the light bulb and thread the lampshade through the bottom. A long chain can be hung, for example, on a hook mounted on the ceiling next to the base of the chandelier.
What other options are there?
There is another way to mount a chandelier. Place a metal ring on the lamp hanger and attach chains tied to the hoop to it. Detailed Process shown in the video below. By the way, the technology for making brushes in it is slightly different. And the author does not use a hoop, but metal hoops.
The tips of the brushes can be painted in a contrasting color:
Or make a gradient chandelier from colored threads, like here:
YouTube channel Coral What do you need
- Globe;
- drill;
- stationery knife;
- marker or pencil;
- lamp pendant;
- bulb.
How to do
1. Remove the globe from the stand. At the bottom, go around the circle with a drill and cut a hole. Details are in the video below.
YouTube channel Coral 2. On the other side at the top, mark a circle the size of the light bulb socket. Go through it with a drill too and cut a hole.
YouTube channel Coral 3. Make several holes on the globe with a drill in any places. You can walk along the edges of the continents or highlight some countries. Light will flow beautifully through the holes.
YouTube channel Coral 4. Attach the light bulb pendant, screw it in and hang the chandelier.
What do you need
- Balloon;
- PVA glue;
- water;
- felt-tip pen;
- thick threads, such as yarn or twine;
- scissors;
- lamp pendant;
- bulb.
How to do
1. Inflate the balloon. Mix glue and water in a ratio of approximately 2:1. You can use even less water.
On the part of the ball where the air enters, draw a small circle the size of the lamp pendant. Draw a circle on the reverse side larger diameter: For convenience, you can circle, for example, a glass.
YouTube channel The DIY Cottage 2. It is better to cover the working surface with newspapers or oilcloth and put gloves on your hands. Soak the threads thoroughly in the glue solution and begin to wrap them around the ball.
YouTube channel The DIY Cottage 3. Continue gluing the ball with thread, trying not to touch the circles outlined. Arrange them randomly. The density of the layer depends on your taste: you can completely cover the workpiece or leave some free space.
YouTube channel The DIY Cottage 4. Leave the structure to dry for about two days. Then deflate the ball and carefully remove it.
YouTube channel The DIY Cottage 5. Thread the socket into the smaller hole, screw in the lamp and hang the chandelier by the pendant.
diynetwork.com What do you need
- Glass bottles;
- glass bottle cutting machine;
- sandpaper;
- decorative wire;
- lamp hangers;
- light bulbs.
How to do
1. Rinse the bottles thoroughly and remove the stickers, if any. Cut the bottom using a machine and go along the edge of the cut with sandpaper.
diynetwork.com 2. Thread the wire into the neck and attach the socket. Randomly wrap the bottles with decorative wire and screw in the light bulbs.
diynetwork.com What other options are there?
In this master class, bottles were attached to a wooden base and the chandelier was decorated with artificial greenery:
What do you need
- Veneer in rolls (very thin sheets of wood);
- measuring tape;
- pencil;
- scissors;
- iron;
- parchment;
- paper clips;
- glue gun;
- lamp pendant;
- bulb.
How to do
1. Cut six 90 cm long strips from the veneer.
YouTube channel Søstrene Grene 2. Iron them through the parchment to even out the veneer.
YouTube channel Søstrene Grene 3. Place two strips crosswise on top of each other and secure with paper clips. Attach another ribbon to the side.
YouTube channel Søstrene Grene 4. Make another piece of the same shape from veneer. This triangle should be larger than the previous one.
YouTube channel Søstrene Grene 5. Place the pieces on top of each other as shown in the photo.
YouTube channel Søstrene Grene 6. Mark the outline of a small triangle on the bottom piece. Also trace the outlines of the intersecting stripes on both parts. All the details are in the video below.
7. Remove the top part, remove the staples from the bottom in one place. Lubricate the junction of the strips with glue and glue them together.
YouTube channel Søstrene Grene 8. Treat the veneer in the other two places in the same way. Glue the top piece. Place it on the bottom one along the marked marks and attach it with a gun.
YouTube channel Søstrene Grene 9. Connect adjacent strips of the upper part with paper clips, as shown in the photo and video below.
YouTube channel Søstrene Grene 10. Fasten adjacent strips of the lower part, pulling them under the upper ones.
YouTube channel Søstrene Grene 11. Glue the areas connected by paper clips. On the back side in the middle, attach the part into which the light bulb is screwed, trace it from the inside and cut off the excess.
YouTube channel Søstrene Grene 12. Insert the pendant, secure it to the ceiling and screw in the light bulb.
What other options are there?
Here is a more classic lamp made from veneer:
This is the process of creating an unusual large chandeliers with thrown over wooden beam light bulbs:
And here we show you how to make a beautiful wooden frame for an old, unsightly lamp:
What do you need
- Plastic bottle with a volume of 20 l;
- gold spray paint;
- black spray paint;
- lamp pendant;
- bulb.
How to do
1. Carefully cut off the top of the bottle. The bottom one will no longer be useful. Remove the cover.
YouTube channel Elyasaf shweka 
YouTube channel Elyasaf shweka 3. Cover the outside with black paint. Let the future chandelier dry completely.
YouTube channel Elyasaf shweka 4. Place the chandelier on the pendant and screw in the light bulb.
What other options are there?
To make this chandelier we took five liter bottle and decorated with the remains of wallpaper folded using the origami technique:
YouTube channel Wayfair.com What do you need
- Basket (for example, straw);
- pencil;
- knife or other suitable tool for cutting;
- lamp pendant;
- bulb.
How to do
1. Trace the cartridge in the middle of the bottom of the basket. Cut a hole along the line.
YouTube channel Wayfair.com 2. Insert the cartridge there and secure it from the inside.
YouTube channel Wayfair.com 3. Screw in the light bulb and hang the chandelier from the pendant.
In electrical goods stores there are all kinds of lamps - manufacturers go to all sorts of tricks so that every buyer finds exactly what suits him both in design and affordability. But a sconce created with your own hands still remains the most original functional decoration of the home.
Electricity and creativity
During production, installation and operation, electrical appliances require compliance with all rules prescribed by law, safety standards and the laws of physics. Therefore, if you do not have special knowledge and skills in working with electrical appliances, then it is best for creativity to use the base from an old sconce, at least its electrical filling. Collect Wall Light, as they say, from scratch it is possible only for those who understand the materials, tools for assembling such equipment, know the branch of physics called “electricity”, know how to assemble electrical circuits, meeting the requirements for household appliances lighting. If all knowledge about this sphere of life comes down to a successfully forgotten physics course in the school curriculum, then it’s not worth the risk. It’s better to use that wall lamp that has been asking for the trash for several years. Different types of creativity and craftsmanship allow you to create sconces with your own hands. Photos of similar works are presented on this page. Therefore, the question of how to make a sconce with your own hands does not require a complex answer, you just need to use your imagination.
Lampshade for sconces - the essence of the lamp
Wall sconces perform an interesting functional task - lighting small area premises. They are located on the wall, and most often the light from the sconces falls down, slightly scattering to the sides. That is why wall lamps are popular for creating coziness in the bedroom, in the kitchen, above the table where the whole family gathers, near a seating area with an armchair or sofa. Such a local lighting device can have any design in any style - from eco-style to high-tech. Only the interior of the room decides what the sconce lamp will be like. Therefore, a variety of materials can be used for hand-made wall lighting. The only condition is that they must be resistant to a sufficiently high temperature of the light bulb during operation. Although, thanks to modern LED lighting devices, this question disappears in itself - the LED light bulb heats up to 64 degrees during operation in the lower part, where there are necessary elements lamps. The flask itself heats up to approximately 33-34 degrees, i.e. You can easily hold it in your hands. That is why LED lamps allow you to use almost any material for the lampshade. Having decided to make a sconce with your own hands, you can turn to materials in available sources or printed publications to choose suitable option and for your creativity.
Threads and weaving are a suitable basis for creativity
Different types of thread weaving: macrame, tatting, knitting, crocheting, fork - are actively used by needlewomen to decorate the interior of their home. Creating a lace sconce with your own hands is not a problem for a craftswoman; you just need to find a suitable pattern or develop it yourself. When preparing for work, you should first think about the base of the lampshade. Will the lace be stretched or will it hang down, what shape is the lampshade and how to put the lace on it: following the pattern, or will it be abstract, or undemanding to the clear correspondence of each rapport. Lace will look very elegant on a rounded lampshade with a classic shape. And for a non-trivial solution for a DIY sconce lamp, lace may be appropriate. For example, for a high-tech style you can use lurex or metallic threads. But even those who don’t know how to knit can make a lace bra with their own hands using ready-made lace. Measure the area of the frame for the lampshade and buy the required amount of the material you like with a reserve for any shortcomings or unforeseen circumstances in the work - and an interesting, unusual lamp will decorate the room. In general, threads always make beautiful lamps. Even chaos created from textiles can be presented in an unusual way, for example, by winding threads around balloon, having previously coated them with PVA glue. When the threads are dry, the ball must be carefully deflated by piercing it with a needle. The resulting cobweb sphere is used as a lampshade.
Wood and light
Wooden objects look very original in any interior. Natural wood is beautiful - with its own pattern, shades and color transitions. Using the natural bends of branches, you can get interesting objects and their details. How to make a sconce from wood with your own hands? Several options can be used. For example, you can take special blanks that are sold in craft stores. They are assembled or glued together to form a lampshade for the lamp. You can try to make an unusual sconce from the most ordinary twigs collected during a walk in the park. Wash small, 1.5-2.5 centimeter long branches, remove dirt, and dry. Then inflate an ordinary balloon and stick twigs onto it in a chaotic manner, using glue that does not destroy the rubber of the balloon, for example construction PVA. When the twigs have a good grip, the ball needs to be pierced with a needle, it will deflate and separate from the resulting ball of twigs. The lampshade, if necessary, is coated with furniture varnish. The only thing is that you will need to prepare a base on which the lampshade of the resulting diameter is attached. You can also make a DIY wall lamp from unusual wooden parts. For example, by dismantling wooden clothespins for parts. They are assembled together so that they form a circle, gluing them to the base and to each other. Each half of the clothespin has an interesting shape with recesses that are simply ideal for a jute cord or decorative braid, chain, or any other material that is most appropriate for a specific interior solution. You can also use colored pencils - creating a chaotic lamp ball or gluing them into a slender circle or semicircle to form a lampshade.
DIY sconces made from dishes?
Craftsmen will come up with anything they can to create something interesting. For example, they use disposable plastic dishes- waste cheap material - for creating interior items, including sconces, with your own hands. Plastic spoons, having cut off their cuttings, are collected in the shape of a flower, gluing them together in circles and in rows. Disposable forks, also without stems, are assembled like a construction set using teeth into a sphere for the lampshade. The plates are bent to form two semicircles and also fastened together. This is an interesting DIY sconce solution that is actively used in decorative arts.
You don't have to throw it away!
Unusual wall lamps are made from tin cans. The cans themselves already represent a rigid shape that can easily fit a lampshade. You just need to decorate it. You can do it this way - draw a picture on the jar like dot painting and using a nail and a hammer, punch holes according to the diagram. To prevent the jar from being dented when a hammer is used on it, you need to place a block of wood inside it. The pattern must be constructed carefully, and the distances between the holes must be the same. When the drawing is completed, the jar needs to be painted.
An unusual DIY sconce is made from ordinary plastic bottles. They are different color, are easily cut with scissors and melted with a candle. Figures (flowers, butterflies, ribbons) are cut out of plastic, melted, giving them shape, and then using glue they are attached to a base from the same bottle or to an old glass lampshade. By the way, lost appearance a glass lampshade can be decorated in any way and give it a second life.
"Delicious" DIY sconces
A lot of interesting things can be done using natural materials. For example, pumpkin. Yes, you can create magic yourself, without magic wand fairies, if you just want to do something with your own hands. And the pumpkin just begs to be put on the desktop. There are varieties of pumpkin that can only be eaten, and there are those that are not suitable for a tasty dish, but hard shell serves as a unique creative material, for example, to create a sconce lamp with your own hands. The pumpkin is prepared for processing, and then pictures or a mandala design are cut out of it, whatever you want. Such a lampshade for a wall lamp will not only decorate your home on Halloween, but will also bring a smile on any other day.
As easy as pie
The simplest sconce lamp can be made from an ordinary box, for example, juice or milk. It’s good when the inside of such packaging is covered with a layer of metallized foil, which is ideal for creating a lamp. Such a box will make an original sconce if you cut out the walls and cover them with, say, parchment paper or lace fabric, or make plot pictures on the walls of the box. This lamp is suitable for a child’s room, because the child can come up with a picture, and the parents will help cut it out. Collaborative creativity will make the room more comfortable and the family more friendly.
If you want to do handicrafts, decorating your world, then there will always be materials for creativity and interesting solutions. You just need to want to create beauty with your own hands. Good luck!
Lighting fixtures can not only dispel the darkness, but also give an unusual aura to your interior.
There are many different ideas with which you can make a wall lamp or any other type of lamp with your own hands.
You yourself are capable of creating a masterpiece that cannot be found in any store.
Creating an extravagant chandelier
Very original item It is made from the simplest materials, most of which can be saved after a picnic. Lamps from various containers will look impressive.
To do this you will need:
- oval plastic bottle with a capacity of 5 liters;
- disposable spoons;
- cable with socket and plug;
- LED lamp low power;
- pliers;
- glue gun;
- screwdriver;
- stationery knife.
To avoid fire, use only LED bulbs!
Use a knife to carefully cut the bottom of the bottle, then remove the handles from all plastic spoons. Apply a small amount of hot glue from a gun to the cut area and glue them to the bottom of the container.
Approximately you will need about seventeen pieces. Place the next and remaining rows in a checkerboard pattern.
In order to hide the neck of the bottle, place ten to twelve spoons without handles on the glue so that they form a ring.
Pull the socket with the lamp and cable through the hole at the bottom of the bottle.
If you don’t want to make this part yourself, you can purchase it in any department of household goods - the wire, socket and plug are already connected together.
Make a hole in the lid for the cord by drilling it with a drill or a hot self-tapping screw. Screw on the lid and place the previously prepared ring of spoons on top. Exclusive LED lamp ready for use.
Some ideas for creating lampshades
It’s enough to simply create a lamp from scrap materials for your home or garden.
Idea N1
- any hollow dish (this could be an old saucepan or flower pot);
- wire;
- polyurethane foam and gloves;
- paint and brush;
- sharp knife;
- pliers.
Place the item taken as a basis upside down. Wind the wire around the product the way you want the lampshade to look, since all the turns copy its shape. Put on gloves and squeeze the foam onto the frame a little at a time until it completely covers the wire, leave to dry.
Then, using a knife, give the contours more evenness and paint them in any color. This option will be the best for a street lamp.
Idea N2 is a classic
- thick wire;
- pliers;
- small bottle of water.
Note!
To make the top central element, wind a coil of wire onto the bottle, then remove it and trim off the excess. The ends must be secured so that they form a ring, the diameter of which should allow the cartridge to pass through at the bottom, and prevent it from coming out at the top.
Next, you need to make a large outer ring from the wire. To secure it you will need four equal pieces of wire. Connect one edge of each to the small ring, and the other to the large ring. The upper part of the lamp is ready.
The largest will be the bottom circle of wire; it must be attached to the second top one, evenly placing five identical pieces of wire.
To decorate the frame, thread a wire through the second top ring, giving it a wavy shape, and wind it onto the base. Decorate the bottom ring in the same way.
Note!
When walking through the forest, take with you an interestingly shaped branch; it will make an excellent wooden lamp. Wash the branch and remove the bark from it with a knife, coat it with wood varnish. For good stability, screw the lamp to a heavy stand with self-tapping screws; wood can also serve as a stand.
A better option is an oak tree; find a broken branch and saw off a circle at least five centimeters thick from it. Varnish or paint it too.
Making a lampshade with children
There is an option for making a lampshade with children. For the frame you will need a canister or bottle with a capacity of five liters. You need to roll the paper strips into a tube, it is best to wrap them around a pencil or sushi stick, then glue the remaining edge with glue.
These blanks need to be glued to the frame in several layers so that there are no gaps. When the glue has dried, the lampshade can be put on table lamp or do ceiling lamp, which looks very unusual.
Experienced needlewomen can knit or crochet a lampshade, decorating it with crocheted flowers and ribbons.
To give the product the correct shape, you can use a starch solution or regular PVA glue. Look at the proposed photos of knitted lamps, how much tenderness and comfort they contain!
Note!
This article told you how to make a lamp with your own hands. Using the information received and your own imagination, you can now create an exclusive lighting fixture for any room.
DIY lamp photo
To create a lighting device, they use almost everything that can be found at hand: wooden sticks, pieces of plinth, containers, wood cuts, metal sticks and pipes, glass items, fabrics. Homemade lamps they make them futuristic, classic, glamorous, minimalist. For each type, several step-by-step master classes have been created. Designer rooms are usually decorated unusual lamps. These can be products with slots, many individual fragments, in the form of a large ball or cube. The same lamps can be made with your own hands, from any material. This is done not only by craftsmen who sell their products, but also by ordinary owners of apartments and houses. Homemade chandeliers can be similar to store-bought ones or made in an unusual way: from graters, tin cans, etc. The shape depends on the characteristics of the material and the imagination of the performer.
What can be used as materials
You will need:
- fat cream;
- PVA glue;
- cotton buckle;
- dye;
- balloon.
There are a few interesting options. From ordinary threads you will get a beautiful glowing ball. First you need to inflate the balloon and lubricate it with cream. It is placed in a container with water and PVA diluted in it. Then it is wrapped with threads. The structure is left to dry for 24 hours - all that remains is to place the product on the lampshade. The second method is to use straws. The sheets are twisted diagonally, the protruding ends are glued. You will need two hundred tubes: they are glued together into a round or triangular shape. The next option is a wire lampshade: it is twisted into a spiral or conical shape. You can also create a lamp from plastic bottles: the bottom and neck are cut off. You will need a wire acrylic paints, sealant and marker. There are many other techniques for creating a lamp with your own hands.
Options for creating wooden lamps
Making a lamp with your own hands is primarily an art, not an economy. Despite the fact that wood is a simple and inexpensive material, products made from it can compete with others in terms of workmanship and aesthetics. The process of making them will not be the easiest. You will need to carry out complex calculations, work with a large number of tools, and remove a lot of garbage. Lighting fixtures are made from saw cuts, branches, veneer, wooden slats, wooden boxes and frames, wheels, logs, beams, etc. Wooden lamp - perfect solution for an antique-style interior. It can be made from a piece of trunk or from processed materials, for example, in the form of a complex geometric design from sticks, a ring, a cylinder or a square created from four or eight bars.
Master class: how to make a lamp from wood cuts
You will need a tree trunk, Grinder, hacksaw, LED Strip Light(2 m), brushes, wood varnish, glue, matte plastic pipe. First, the trunk is cut into slices of equal thickness - about 2 cm. Then a template is made in the center of one of the cuts. It and all other sections are drilled according to the markings. Measurements must be taken carefully; due to poorly marked fragments, the entire process will have to be started again. After this they need to be sanded. The next stage is strengthening with glue and laying on pads to dry. After this, the log houses are varnished. At the same time, you can prepare a matte tube - a rod for the structure. Its surface is processed to maximum matte effect. The cuts are put on the tube and after that there is only one more step left to do. The last thing to do is install the tape. It needs to be folded in your hands and placed in this form in the tube.
The list of necessary materials and tools includes: self-tapping screws, drill, chipboard, brush, acrylic varnish, electrical block, 4 cartridges and 7 two-meter slats. You need to cut out blanks from chipboard, and paste over their edges with edging. The slats are assembled into a single structure in the form of a cross with a diamond shape in the center. A base is cut from a 5 mm sheet of plywood. In places where the slats create intersections, pieces of bamboo sticks or dowels are installed. It is necessary to drill 8 holes in the base: 4 are for the ceiling, and the same number for the main part of the lamp. From a tin you need to bend 4 corners with beveled edges. They are mounted with self-tapping screws so that the open parts of the corners are directed inside the lampshade. The entire wooden frame is varnished twice, with a break for drying. At the end, the cross-shaped structure is screwed with confirmations.
It can be made from twelve strips. For the inner part, take a smaller one - 60 cm, for the outer part - 70 cm. The strips are made from sheets: they are cut along the fibers with a steel ruler and a knife. On a large sheet of paper you need to draw a circle with a diameter of 350 mm. It is divided into sectors of 30°. On the left and right sides of the lines separating the sectors, parallel lines are drawn along the perimeter of the circle to determine the desired position of the veneer strips. Then a disk with a small hole is prepared to place the strips. They are glued clockwise in the shape of snowflakes, first three short ones, then three long ones. After the glue has dried, you will need to make a hole about 1 cm wide in the structure of the strips. A wire is inserted through it, and a sleeve is attached to the disk. The hanging ends of the strips are fixed with a flange and bolts.
Lamps made of textiles and threads
To create a lampshade, you can use old clothes: jeans, knee socks, damaged dresses, etc. The products are decorated with bows, pockets, threads with beads. In almost all cases, the fabric must be placed on some kind of frame. You can also make it yourself. It is better to choose metal, sometimes wood, as a material. The basis for a homemade fabric chandelier can be factory lamps, both new and old. The fabric of a regular old lampshade can be removed and replaced with a modern one with stylish patterns. Threads are used to create and decorate homemade chandeliers different thicknesses. They wrap various jars and frames, connect parts of the lamp and hang the structure. Lampshades made from hardened threads look interesting. In addition to them, twine or ropes are also used. They go well with different fabrics and papers.
Master class: spherical lamp made of threads
To create this product you will need:
- The base is from a table lamp.
- Glue.
- Thick threads (up to 4 balls).
- Air balloons.
First, the balloons are inflated. It's better to have several, because they can burst. Their shape should be perfectly round. On each of them, a ten-centimeter circle is drawn with a felt-tip pen. A stand with a light bulb will be inserted through a hole of this size. The ball is placed on oilcloth. An adhesive solution is being prepared. You need to wear rubber gloves on your hands to dip the threads into it. When they are saturated with the solution, they are taken out; then the glue clumps are removed. The end of the thread is tied to the knot of the inflatable ball. After this, it is wrapped around the entire ball; this must be done evenly over the entire surface, but chaotically. It is advisable to use several threads of different colors. The ball is then suspended until the structure dries. Then they burst it and cut off the knot. The ball is removed through big hole, into which you will then need to insert a socket with a light bulb.
DIY fabric lampshade
You will need thick paper, glue, fabric, threads to match the color of the fabric, pins, ruler, pencil, iron. You will need to make a template to calculate the required amount of fabric. If the frame for the lampshade should have a cylindrical shape, then measure the circumference and height and alternately draw the corresponding lines, creating a right angle. Finishing the drawings opposite sides rectangle. The desired shape is cut out of paper. It is applied to the fabric. From it you need to get a larger rectangle. It is cut after the desired fragment is selected. Then the material is secured to the template with pins (its edges need to be folded). After this you need to use sewing machine. The treated fabric is ironed. After this, it is glued to the base. Unprocessed sections are hidden. The seam is made so that the base is covered by the stitched edge.
Plastic chandeliers and lamps
Plastic has become one of the most popular materials in modern interiors. This also applies to lamps - a wide variety of models are sold. You can make a chandelier with your own hands that will not yield to anything finished products. The lampshade of a lighting fixture can be constructed from anything. It can be disposable cups, various sticks, painted plastic bottles. They are sometimes decorated with decorative devices: figurines, luminous details. As auxiliary material You can use various metal frames. The easiest way to make a table lamp. You can use cut-out parts and shapes with holes. Instead of throwing away unnecessary plastic items (used disposable tableware etc.), it is better to try to make a small lamp out of them that can decorate the room.
Master class: making a lampshade from plastic spoons
You need to find a large number of identical plastic spoons, up to 200 pieces. It will be more difficult to construct a product from entire devices, but if you cut them, everything will work out quite quickly and simply. The handles of the spoons need to be cut off and removed, leaving only the scoop. Next, you can use the finished lampshade to cover the elements or cut it out of the eggplant. They make it out of it bottom part and make a hole for the light bulb or cut off the top of the neck, leaving a fairly wide hole. Next you need to decide on the design. The upper surfaces of the cups will create a shell-like pattern, and the lower surfaces will create a “scaly” surface. If you choose the second option, then you need to glue jumpers to the eggplant. First, the top part is finished, laying out rows of spoons one after another. When the process reaches the open part, you need to calculate everything so that the last row hides the cut edge of the eggplant.
The following can be used as fastening:
- glue;
- office plasticine;
- scotch.
You will need steel wire for the frame, thin wire, a soldering iron, scissors, ten plastic bottles various shades Green colour. You need to cut leaves of different sizes and shapes from the bottles. Fragments in the form of birch leaves and other leaves with a more or less compact shape are ideal. This will result in a larger number of elements. It is better to process sections simulating plates with a soldering iron to make them slightly bent. You also need to make veins with the edge of the sting: the leaves will become more natural look. Since the bottles are cylindrical in shape, the blanks will have a curvature. Holes for thin wires are pierced with a hot needle. You need at least two on each leaf, but four is even better to thread the wire through the figure eight. As many sheets as possible are put on each one. Then the flexible wires are securely twisted into a frame of steel wires.
You need to handle the soldering iron as carefully as possible so as not to burn your fingers or burn the leaves.
You can make several types of such lamps. Materials needed: rubber feet, silicone sticks, fluorescent lamp, fiberboard circle, CDs. You will need tools such as a triangle ruler, pencil, compass, glue gun, screwdriver, pliers, pliers, drill. IN round shape A hole is made from fiberboard in the very center, twelve sectors are drawn on it. On the lines that separate them, one small hole is drilled. Steel wires will be stretched through them, each of which will house a stack of disks. The design will be quite heavy, so metal wires are needed. A wire with a socket is inserted into the hole in the fiberboard circle, and a light bulb is inserted into it. From the disks you can also make a polyhedron lamp, a lampshade in the form of a ball, petals, or a ring lamp.
Ways to create lamps from paper
This material is popular because of its flexibility. You can design an interesting figure or fold sheets of paper several times and make flowers. Folded paper sheets are joined into round shapes. Paper lamps are made in the form of plants, animals, abstractions. Some people like to make patterns and cutouts. In some Eastern countries, chandeliers made of rice paper are widely used. To make a lamp, you can use the origami technique. Paper lamps are created in two main ways, namely using one or more large sheets or gluing large quantity paper elements. Over the past ten years, desktop and floor lamps. You can make lamps, carved pumpkins and houses from paper. This material is also suitable for creating a traditional lampshade:
- conical;
- cylindrical;
- elliptical.
Made from rice or parchment paper
Rice paper is useful for creating a Chinese lantern. Additionally, you will need thread, an awl, a stationery knife, a ruler and a pencil. First you need to make markings on paper. The flashlight design consists of many diamond-shaped sectors. Half of them are filled with vertical intermittent markings. After this, the sheet is folded into an accordion. He curls up into a circle. Painted lids can be glued to the top and bottom. To make a parchment paper lampshade, you will need a marking board, a compass knife, two sheets of parchment paper, two rolls of wax paper (similar to parchment paper), scissors, silk ribbon, and a hanging frame. Strips of satin ribbon 18-20 cm long and 40 cm long are attached to the frame structure. The final stage consists of pasting circles of parchment and wax paper onto ribbons. They need to be attached with an overlap.
Origami chandelier made from paper bags
To make such a lamp with your own hands, you will need a wire with a switch, an LED lamp, and two paper bags with a pattern. First you need to learn how to do simple origami. The next thing to do is cut off the bottom of the bags and remove the handles. They are glued together into one large paper bag. It is folded in half. Both parts are “turned” into accordions. You need 16 identical stripes. The outer ones are folded diagonally. A hole is pierced with an awl. One of the two open sides is securely fixed with a thick thread. It is necessary to leave room for regulation. The second one will be open. The LED light bulb is connected to the socket, the top of the lampshade opens and closes back. This kind of lighting is necessary; incandescent lamps cannot be used. The wire is fixed on a branch of a tall decorative tree - the product is ready.
Products made from corrugated paper look very original, which is why the material has become so popular. You will need an LED lamp, cable, thread, glue, knitting needle, ruler, fragment corrugated paper 44x88 cm. First of all, you need to take a ruler and a pen and mark the paper on a line with the same width. Using the drawn lines as a guide, you need to make an accordion out of a flat sheet of paper. Using a knitting needle, it is folded diagonally at one end, then returns to its original position and folds on the other side. The paper needs to be unfolded again - the diamond shapes should stand out on it. The entire sheet now consists of double shapes. The first and subsequent folds must be made corresponding to the width of the stripes, otherwise the appearance of the paper will deteriorate. The workpiece is twisted into a spherical shape, and its upper part is fastened with thread.
Butterfly chandelier
There are two ways to create such a lamp:
- One big butterfly.
- A “swarm” of small moths of different sizes.
Preschool children will prefer a lampshade in the form of many hanging figures. Individual parts of the lamp can be lowered up to one and a half meters from the ceiling. An old lampshade or its frame is used as the basis. If there are no such blanks, then you can use a rim made of metal or wood or thick wire twisted into a circle. You need to prepare sheets with butterfly templates to select butterflies of the required sizes and shapes. It is recommended to make moths of at least five different sizes. Then the structure will be visually larger. Butterflies are cut out with small scissors or a stationery knife. It is advisable that the paper be thick. The cut out figures are painted with different colors and decorated with sparkles, but on some templates the butterflies may already be colored. To finish the product, the butterflies are fixed on fishing lines and attached to the base.
The finished Chinese lamp can be used as a basis for other products. They are cheap. You will need a perfectly round model. The first option: cut circles of different colors from fabric and glue them overlapping. From a Chinese ball you can make something like a round plate-shaped cone. Second method: circles are cut out of square-shaped sheets of paper. They are connected in the center, the edges are raised until the perfect flower is obtained. The elements are attached to the ball in ordered rows. Paper sheets make beautiful tartlets. They should be filled with something. The paper is also folded into square envelopes that can be turned into four conical ramekins. Some people use an old wall map instead of paper. A newspaper lampshade with printed images in gray or brown will look stylish in any interior.
Lamps made of metal pipes and tubes in loft style
Non-functional water pipes with taps can be mounted into a single structure, equipped with light bulbs and thus create a stylish and useful thing. It is better to place it on the wall. This is a very popular finishing element in the loft style. Lamps in the steampunk style are created from large and small pipes. These are complex designs; they cannot be made without special training. However, it is possible to design a small robot with a “head” shaped like a light bulb. Pipes make beautiful things ceiling chandeliers. In addition, there are various models of lamps from metal pipes. The material often used is brass. Chandeliers are created in the form of compositions from several tubes. Pipes, as a rule, are made in one piece, but lamps with various patterns and openings are also produced. They are not inferior in popularity to lamps in the loft style.
Can be made beautiful product in the form of diamond faces. In addition to the pipes themselves, you will need sandpaper, a jigsaw, twine or wire, and gloves. For creating original chandelier you will need 20 pipes: 10 short (6 cm), 5 medium (12 cm) and the same number long (25 cm). You need to find several long pieces, mark them and cut them with a jigsaw. After this, you need to start sanding with sandpaper so that the edges of the tubes are perfectly smooth. Then the fragments are collected onto thick wire or twine. First, horizontal rows are created: the bottom of five short ones and the middle one of the same number of medium tubes. Then they are connected by five more short tubes. The upper part of the structure is made of five long fragments that need to be combined with the already prepared part. Long pipes do not come together completely; the cartridge must be secured in this place.
Lamps made from plumbing pipes
It is necessary to prepare such devices as electrical cable, electrical tape, adhesive tape, various screwdrivers, two-core wire, cartridges, hinges, fittings that match the parameters of the pipes. One of the tubes should be larger - it will serve as an attachment to the ceiling. The assembly process is quite complex. You need to create a diagram on paper, and only then get down to business. At this stage, the design configuration is determined. The splitters must be connected correctly. All parts of the structure being prepared can be polished and painted. It is better to give preference to white, red, gold and black colors. You need to wait about a day for everything to dry completely. After this, all the pipes are assembled together. Light bulbs are screwed onto them. The last stage is connection. Since the scheme is complex, it is better to invite a specialist.
Using glass to create lamps
You can hang a composition of several on the ceiling empty bottles from alcoholic drinks. Three-liter jars can be hung by metal chains. Glassware is also suitable as a lampshade. A lamp made from many glass fragments can imitate crystal chandelier. Broken glass objects find a new purpose in the form of an original lighting fixture. Glasses and wine glasses make beautiful table lamps. Various glass boxes, glass from old wall sconces, headlights, interior doors. A homemade glass chandelier can be painted with watercolor or stained glass paints. You will get beautiful stained glass windows. To create pendant lamps, craftsmen use a variety of decorative containers from oils and perfumes. Unlike wood and paper, glass has high fire safety.
Add to list necessary equipment includes wire cutters, screwdrivers, screws, glass cutter, silicone, rag or brush, stain, pine boards, hooks, chain, ten light bulbs, wiring, wine bottles. The first step is to process the containers. Labels and remaining glue are removed from the bottles. Using a glass cutter, you need to remove the bottom of each bottle: it rests at a height of 1-2 cm, and the bottle rotates around its axis. The cracks must be tapped with a hammer until the bottom falls off. After this, the electrical wires are placed in bottles and connected to the cartridges. Light bulbs are screwed into them. Now you need to prepare the boards. In the lower, larger one, holes are drilled for necks and wires. The top one will collect them in one bun. Hooks for chains are screwed into the bottom board, which will hold the structure. For the kitchen, you can make a table lamp with a bottle base and a wooden shade.
Wooden boards can be stained to give an antique effect.
Using old cans to create lamps
Old jars can find a new purpose. Lamps can be created using threads, electrical wires, and handles for cans. Containers must be equipped with handles. They will need to be tied with threads attached to a pre-prepared iron frame. Electrical wires with sockets and light bulbs are lowered into the jars - the chandelier is ready. You can make an option for the dacha - threads are tied around tree branches, and candles or small lanterns are placed inside the jars. Containers wrapped in multi-colored threads or decorated with patterned napkins look beautiful. The inside of the cans can be painted White color, and while it is still wet, apply a drawing in the form of chaotic lines. Some paint containers with outside different colors, and paint an image on top using glitter shadows. Banks can also be lined with small broken glass.
Chandelier / lamp in shabby chic style
Beautiful decorative items are created from beads and fabric, including lamps characteristic of this style. Decorating in the shabby chic style means that the room is designed to accommodate a girl or woman. You will need beads, beads, threads, chains, a socket with a lamp, a finished wooden or metal carcass. The first step is to paint the base in one of the soft shades. After this, it can be wrapped with decorative elements or fabric. The top of the lampshade is wrapped with smaller beads, but in larger quantities - up to 40 beads need to be strung on one thread, while on the lower threads - about 20. This is an approximate proportion, it, like the tension of the threads, can be changed depending on the size of the structure. The lamp is usually covered with pink fabric. All decorations are hung so that they flow down.
Conclusion
A chandelier is the single most important element at the top of a room and can create symmetry and other geometric accents. To hang a beautiful, stylish, designer lamp in your room, you don’t have to buy it in a store. Every home has enough items and tools to do everything yourself. In most cases, a blank, scissors, paper, glue, thread, frame, varnish and paints are enough. Sometimes you may need the help of a professional electrician. Most “handmade” lamps are made of wood, plastic, paper, glass, textiles or metals. There are also more exotic options using different designs, small parts, molds. Homemade chandelier must not only fulfill aesthetic function, but also provide high-quality lighting for the room. It should be designed wisely.