Nothing brings joy to the house more than something made with your own hands. And it's true various homemade products for the home not only fill life bright colors, but also give the interior uniqueness and some zest. And it’s certainly impossible to forget about such a thing (even if it’s a small trinket). Moreover, it is not so important that these are homemade products made from wood for the home, from paper or plasticine. There are millions of options and methods for making various gizmos, and today we will look at several of them. So how to do it interesting homemade products for home?
Shelf made of tin cans
It would seem that such a trifle is a coffee jar. However, even from it you can make a beautiful, convenient and useful shelf for storing household items. Often, various souvenirs and memorable photographs are stored in such containers. There is little practical benefit from this homemade product, but such jars look very harmonious.
Details about the procedure for making this craft
1. First, holes are made in the jars using a drill or a special knife-ripper (in the top and bottom - 3 points, and in the walls of all the rest - 2 points).
2. Next, the jars are fastened together. Nuts and screws are used as fastening elements small sizes. By the way, to get the desired (beautiful) result, you will need to have at least 5-6 of these jars.
3. Afterwards, a hole is punched in the containers for screws. 1-2 holes are made in the bottom of the jars located in the upper part of the structure to attach the shelf to the wall. The finished homemade product is screwed on with a screwdriver or screwdriver. To do this, dowels are first driven into the wall.
That's it, now homemade products for the home are being introduced. Rest assured - various small items will definitely not get lost in such jars. Thus, you kill two birds with one stone - decorate the interior and get rid of clutter in the house.
Homemade crafts for home - how to make a clock on a CD/DVD?
The clock on the CD is also very interesting and original version interior decoration.
As you can see, the design of this device is very original, and therefore it will look organically against the background of any interior (perhaps it will become its highlight). Such “smart” homemade products can be made for the home in a matter of minutes. We will tell you in more detail about all the stages below.
So, how to do it yourself homemade watch? First, you will need to prepare the appropriate materials - a CD/DVD (you can choose the design of its front part at your discretion) and a cover-case for it (the distance between the walls should be at least 0.05 centimeters). It is very important that the last part does not have any chips or scratches. To make the work easier, you can purchase a ready-made watch and then simply replace the standard dial.
It must be a pointer, otherwise you won’t be able to make a homemade product. You should also do the numbers. There should be a total of twelve of them. These can be cardboard, paper or plastic circles. Their thickness should not exceed two millimeters. Rhinestones can be used as decorations. You also need to prepare about 30-40 centimeters of wire, a piece of leather or fabric and “Moment” type superglue. The core of this entire design will be the CD. We will redo it first.
First you need to mark the disk into twelve equal parts and glue the numbers to the marked points. In this case, the sectors should not go beyond outside diameter devices. How do you make homemade products for your home? After the sectors, we proceed to the clock itself - remove the arrows and place them exactly in the center of our disk. By the way, before attaching them, you can stick some interesting photograph on the disk, which will make the design of the watch even more original.
To increase the size of the arrows, use thin metal strips. To achieve the desired result, it is enough to apply glue to them and carefully position the part evenly over the entire surface of the guiding elements. The arrow mechanism itself is attached to the reverse side of the disc.
What to do next?
So, the base of the watch is almost ready. The next step is to make holes in the device along the contour of the arrow mechanism. The field of this disc is installed in a case. The mechanism itself is brought out through the hole and closed tightly. Now, using wire, a stop is made, which is glued to the back cover. To make it more durable, glue a piece of fabric or leather on top of it. This will make the stop not only strong, but also beautiful, since the excess part of the wire will no longer gape on the watch as before. That's it, the homemade watch from a CD has been successfully made. All that remains is to insert the AA battery and set the time. By the way, you can also make a battery yourself.
How to make a source of energy from a lemon?
As we know, this fruit contains a lot of acid, accordingly, when correct actions A lemon can be turned into a real mini-battery.
Of course, the charge from such a “battery” will not be enough to work household appliances, however, for operation or charging mobile phone this current is quite enough.
Making homemade crafts for the home - preparing tools to turn lemon into a source of constant energy
During the work you will need tools such as a knife, soldering iron, drill, iron pin, as well as several pieces copper wire in isolation. Among other items, it should be noted the need for one glass or shot glass, a pair wooden sticks and the same amount push pins. And, of course, our main source of energy will be lemon. You can also use orange, but it contains much less acid, so the charge from it will be minimal.
Instructions
First, cut the lemon in half. This is necessary so that it gives more acid necessary for the Lemon to be fixed in the glass so that it does not roll around the table. Next, copper and iron pins are inserted into its flesh along the entire perimeter at a distance of 0.5-1 centimeter. Our “minus” will be iron, and our “plus” will be copper.
Pieces of wire are attached to all the pins using a soldering iron. They will serve as a connector for the power supply. All elements are connected in series.
On final stage V battery compartment sticks are inserted. It is important to observe polarity here. The contacts are pressed against contact group. The container remains open throughout the entire charging process of the device.
So we figured out how to do useful homemade products for the home with your own hands. Good luck in your endeavors!
Manufacturing electronic homemade products Do it yourself gained popularity back in the last century, when semiconductor devices appeared. With their help, it was quite easy to assemble devices needed for everyday life from old equipment. Today, repair and assembly of equipment for the home or cottage, for a car or garage can also be solved at home.
[Hide]
Homemade devices for home and garden
Electrical homemade products for home and garden that use the power of electricity can be made by every electrician. Most devices are created using factory components and require only school knowledge of electricity.
Electric kebab maker
The electric kebab maker can be either horizontal or vertical. Stores usually sell vertical ones, and they do their job well after some modification.
To create a horizontal kebab maker you will need a heating element and a frame resembling a barbecue. The heating element can be made from a ceramic tube and a nichrome spiral wound around it. The tube is secured through an insulating material in a metal casing. Drawings will be required to assemble the case.
Barbecue grill
An equally interesting idea is a barbecue grill with electric drive for rotating skewers. By adding an electric motor to a regular barbecue, you can get an excellent device that will cook barbecue in autonomous mode. To organize the skewer drive, you can use a motor from the wipers, from washing machine or any other 12 Volt. Using a pulley system and belt or gear transmission The rotation of the shaft is transmitted to the skewers, and the meat slowly turns over the coals.
Homemade WI-FI antenna
This antenna will improve the reception quality and Wi-Fi speed in your home. According to reviews, after connecting it, the signal level rises from 5 to 27 Mbit.
For production you need:
- a small metal sieve or colander;
- Wi-Fi adapter (USB);
- USB cable;
- drill;
- epoxy resin;
- camera tripod;
- plastic clamps.
Manufacturing process:
- We drill a small hole (14 mm) in the center of the sieve and insert a metal pin into it to secure the adapter.
- Insert the connector from the USB cable into the prepared hole and secure it with epoxy resin. The USB connector after gluing must be strictly perpendicular to the plane of the sieve, then the device will work more efficiently.
- Then, using two zip ties, “ears” are made through which the cable is attached.
- We fix the product on a camera tripod. We drill a hole with a diameter of 12 mm in the antenna and tighten it with a nut.
Necessary materials 
Insert the pin into drilled hole
Glue the USB cable 
Securing the cable 
Tripod 
Installing the antenna using a tripod
Electrical homemade products for the garage
Let's look at several useful DIY projects for the garage.
Homemade chandelier
If you have poor lighting in your garage, then a makeshift chandelier will be very useful. To make a bifurcating chuck, you will need a pair of angular chucks, which are sold at a regular hardware store.
Sequencing:
- We remove the wires from the sockets and fasten them with plastic tie. We get a socket for two lamps. All that remains is to connect them to the electrical network.
- To do this, we use the base of a fluorescent lamp. Carefully break out the lamp, then solder the wires from our design to the contacts of the base.
- We insulate them well and attach the base on top of the cartridges.
The use of ordinary light bulbs in this design is undesirable - the sockets may melt from heating.
LED device
Another lighting option could be a homemade LED lighting device.
To make it you will need:
- old fluorescent lamp;
- LED Strip Light;
- connecting wires.
The manufacturing sequence is as follows:
- An LED strip is glued to the lamp body in one or several rows.
- The connecting wires are connected and brought to the lamp switch.
- The assembled device is tested.
Spot welding machine
A necessary device in the garage will be a homemade device for spot welding, the basis of which is a transformer from an old microwave oven. Prerequisite— the transformer must be working in order not to rewind all the windings.
The process of assembling the welder is quite simple:
- The transformer is dismantled.
- Carefully remove the secondary winding.
- Two shunts are removed.
- A secondary winding of two or three turns is made of thick wire (with a diameter of at least 10 mm).
- Electrodes for resistance welding are made from a copper rod with a diameter larger than the wires.
Homemade spot welding tool
Useful DIY items for fishing
Among the homemade products you can find many interesting ideas for use in hiking conditions, as well as hunting and fishing.
Electronic alarm
An example would be an electronic signaling device for fishing with a regular fishing rod or other equipment. A simple biting device can be assembled in just half an hour. For it you will need an old beeper keychain and a strip of plastic 1-2 mm thick.
Alarm assembly:
- The keychain is attached to the rod.
- A strip of plastic is glued to the fishing line and inserted between the contacts of the key fob.
Now when the fish bites, the fish will pull the line, the plastic will fly out, the contacts will close and the key fob will work.
Underwater camera for ice fishing
Using a homemade underwater camera to winter fishing you can see if there is fish under the hole. And this simplifies the fishing process.
To make it you will need:
- small camera;
- sealed camera box;
- small TV;
- car battery to power the camera;
- extension;
- inverter;
- lead for cargo;
- ultraviolet diodes for illumination during underwater shooting;
- superglue, electrical tape, sealant.
Build process:
- Two holes are made in the upper part of the box. An extension cable is inserted through one. Through the second is the wire that connects the camera to the TV.
- Several more holes are made in the box into which light bulbs are inserted for illumination. The wires from the light bulbs are soldered into one circuit (for example, with a parallel arrangement), which is connected to a cable that provides power.
- The holes are sealed with glue and tape for a tight seal.
- Lead is melted and small elongated bars are poured out of it. They are placed at the bottom of the box.
- Set up the camera and connect it to the cable. After which it is carefully placed in the box so that it has a clear forward and horizontal direction and transmits a high-quality image. For stability, the chamber is surrounded by soft material.
- A torso (rope, belt) is attached to the box, which will be used to lower the camera to depth. For convenience, you can combine it, the power cable and the communication wire between the video camera and the TV into one core, secured with electrical tape.
- Connect the power cable of the video camera to the battery and test the device.
Homemade fish bait
You can make a good bait for fishing yourself. This will be a device assembled based on a simple multivibrator.
You will need:
- sound emitter, for example, from a children's toy;
- wires;
- a small plastic jar, for example, for medicinal tablets;
- electronic board;
- regulator with plastic rod;
- a piece of foam;
- batteries;
- weights for the float;
- volume control.
The bait is assembled as follows:
- You need to solder the circuit and check it.
- Two wires are soldered to the sound emitter. Then they are carried inside the case and connected to the board.
- A regulator with a plastic rod is placed in the lid of the jar.
- A dense circle cut out of foam plastic is installed on top of the board, which separates the board from the battery.
- Weights are attached to the bottom of the jar so that the container floats on the water like a float.
- The regulator sets the frequency and changes the sound.
Bait scheme - 1 
Bait scheme - 2
Electronic homemade products for cars
Car enthusiasts create homemade products with their own hands to improve appearance and ease of use of the car.
Electrical auto tester
A simple homemade electrical probe is perfect for a car. It can show the presence in electrical circuit voltage of 12 volts. It is used to check the serviceability of relays, as well as light bulbs and other equipment. You can make such a device from a syringe and LEDs.
Assembly diagram:
- Two LEDs are soldered with opposite terminals (plus one to the minus of the other and vice versa).
- A steel probe is connected to one of the solders through a resistance of 300 Ohms. To the other solder there is a contact for batteries.
- The design is inserted into the syringe so that the probe comes out of the hole for the needles. Most of the probe is insulated with a PVC pipe.
- 4 LR44 batteries are inserted into the syringe so that one of the poles is connected to the LED contact.
- The other pole of the batteries is connected to a flexible wire with an alligator clip.
The video explains how to make a syringe tester. Filmed by ILYANOV channel.
Light switch
The scheme for smoothly turning off the lights in the car interior is quite simple to manufacture. Such electronics are suitable for any car. A small board consisting of a capacitor and diodes is soldered parallel to the interior lamp terminals. The drop in electricity voltage will occur gradually and create the effect of a gradually fading light.
Car subwoofer
To make a car subwoofer with your own hands, you must first purchase a speaker. You need to start from its dimensions when calculating the size of the case.
The simplest and most suitable form of a subwoofer for the trunk is a truncated pyramid with a slope similar to that of the rear seats.
LED fog lights
You can make LED car fog lights with your own hands.
For creativity you will need:
- two ten-watt LEDs;
- 2 lenses from an old projector;
- gaskets from plastic pipes;
- LM317T microcircuits;
- resistors.
Instructions for assembling the craft:
- LEDs are installed on pre-prepared aluminum radiators.
- The structure is assembled from headlight housings, lenses from projectors, gaskets and diodes on radiators.
- The fog lights are powered through current stabilizers on LM317T microcircuits and resistors.
Car carrying
A very convenient car carrier is made from a computer USB lamp. It is compact and you can connect the device to any place in the car wiring.
Manufacturing scheme:
- Remove the contacts from the USB plug.
- In the plug body we connect the wires of the lamp and the car alligator clips.
- For mounting in in the right place(even horizontally), a magnet is placed on the plug.
A summer cottage is an area where you can give yourself the freedom to conduct numerous experiments and dream to your heart’s content. This manifests itself not only in interior design, but mainly in the design of a garden or vegetable garden. Inquisitive and inventive owners have long been no longer guided by expensive and standard methods for arranging their plots, since there are a lot of alternative solutions for virtually all areas of activity.
There are several types of vertical beds that allow you to optimize the use free space. Non-standard designs – a great opportunity create interesting design garden, vegetable garden, summer cottage.
This type of beds is in most cases used for growing ornamental plants or herbs.
Materials for production:
Length drainpipes regulated in accordance with the wishes of the owner of the site. However, you should not make bulky beds, as they can complicate movement around the area.
Creating a bed
Stage 1. Create a container. To do this, take a drainpipe, cut it in half lengthwise and put special plugs on both sides.
Stage 2. We take the prepared metal holders and put them on the resulting frames for the beds.
Stage 3. We make holes in the pipe. They are made in those places where metal fasteners will be located.
Stage 4. We pass a cable or strong rope through the holes made.
Stage 5. Fix the cable/rope using fasteners.
Stage 6. Fill the resulting beds with expanded clay and soil.
Stage 7. Plant the plants in the beds.
Stage 8. We hang the pipes to the selected location. Sometimes a special wooden crossbar is installed for this purpose, or rather a structure in the shape of the letter “P”.
Step 9: Alternatively, a special design can be made for the pipes.
Important! A bed made of drainpipes is not resistant to strong gusty winds, so you should choose a place for it that is not blown from four directions by winds. Otherwise, the frame will quickly collapse, nullifying all your efforts.
A garden bed made from plastic bag, is another modification of vertical beds. It is extremely compact, functional and interesting in appearance. You can make such a bed in a couple of hours.
Materials for production:
- durable polyethylene film;
- sewing machine;
- priming;
- seedling.
In order for the bed to be strong, it is recommended Special attention pay attention to the thickness of the polyethylene film, which in this case will act as the “frame” of the structure. Minimum thickness films - 0.2 millimeters.
The process of creating a polyethylene bed
Step 1 . We cut out 2 rectangular pieces of film, the size of which corresponds to the size of the bed being created. An allowance of one and a half to two centimeters should be left on each side. The recommended diameter of the bed is twenty centimeters.
Step 2. Sew the rectangles together, leaving only the top part bag.
Step 3. We sew a handle to the future bed, the strength of which will allow it to withstand the weight of the bag filled with soil. It should also be taken into account that when watering the weight will increase.
Step 4. Fill the bag with fertilized soil.
Step 5. We make horizontal cuts on the bag in increments of twenty centimeters. They are necessary in order to plant seedlings in the garden.
Step 6. Plant seedlings.
Step 7. Regularly water the soil and add the necessary fertilizers.
With these simple steps you can get a cheap and useful garden bed.
An integral element of every summer cottage is a compost heap. This is the place where all sorts of biochemical reactions take place to create fertilizers.
To create fertilizers that will satisfy all the requirements placed on them, several key steps should be carefully considered: creating the container and directly correct production the compost itself. Let's talk about each of them in more detail.
Stage 1. Take eight support posts of the same length.
Stage 2. Processing bottom part wooden posts motor oil or tar.
Stage 3. We dig the posts into the ground so that they are reliable and stable. If compost bin will be located next to the fence, then 4 posts (that is, one side) can be attached to the fence. This will avoid having to dig 4 holes.
Stage 4. Between each two adjacent posts we nail the crossbars so that we end up with three independent sections. Be sure to leave gaps that will serve as ventilation holes.
Stage 5. In two sections, we nail the boards horizontally to half the height of the pillars. In these places it is planned to create two small doors.
Step 6. The remaining section will have a large door, so only one board should be nailed. It should be located at the very bottom in a horizontal position, that is, like a regular crossbar.
Stage 7. Install the covers. To do this, you can use one large solid board.
Stage 8. Install the pre-prepared doors.
Stage 9. We provide the doors with handles and latches.
Stage 10. We process the wood using special impregnations.
Stage 11. Paint the box in any color that suits your preferences.
Many gardeners mistakenly believe that any components can be dumped into a compost heap. In reality, to create the right biofertilizer, the “ingredients” must be carefully selected.
Among the required components compost heap the following components:
- peat;
- ash;
- needles;
- tree branches;
- leaves;
- hay or grass;
- wood ash;
- plant roots;
- raw vegetables and fruits, etc.
All elements are randomly mixed in a heap. To speed up chemical reactions It is recommended to cover the pile with a tarpaulin (this is especially true if there is no box).
Trips to the dacha with the family require the presence of entertainment elements on the site that will delight children. The most common way to keep young summer residents occupied is a swing.
Building a swing yourself is not an easy task, but it is quite doable. Of course, you can always take a stick, tie it with a rope and hang the structure on a tree, but this can hardly be called a full-fledged swing. Real craftsmen prefer to build convenient designs with a comfortable seating area.
Structural components:
- two logs;
- strong rope.
Indicators:
- log diameter – 85 mm;
- log length – 700 mm;
- distance between ropes – 500 mm.
Making a swing
Stage 1. We stretch the ropes between the logs.
Stage 2. Wrap ropes around each log.
Stage 3. Let the ropes out.
Stage 4. Tighten the ropes to 3 knots.
Stage 5. Attach the swing to the tree.
Important: this swing is designed for only one person.
Garden path from scrap materials
There are several types of garden paths that you can easily make with your own hands.
Step 1. Remove the sidewall from the tire using a knife or saw.
Step 2. Cut the tires.
Step 3. Line the space with corrugated stripes.
Step 4. Paint the path with paint.
Step 5. Sprinkle with stone chips.
This economical option for those who don’t want to rack their brains and waste time on a full-fledged garden path. Tire paths are usually used for vegetable gardens, as they are easily laid in the ground.
Stage 1. Paint the corks in different colors.
Stage 2. Dig a small trench.
Stage 3. We drive in supports to strengthen the future path.
Stage 4. We construct the formwork using boards.
Stage 5. Install spacers along the edges of the trench.
Stage 6. Place crushed stone deep into the trench and compact it thoroughly.
Stage 7. Make a solution from sand, cement, glue and water.
Stage 8. Pour the solution into the trench.
Stage 9. Press in the plugs in random order. Smooth multi-colored stripes look interesting.
These are the simplest and quick ways make a garden path without purchasing expensive materials.
DIY tools
The expression “everything is useful on the farm” turns out to be more relevant when we're talking about about canisters. From this plastic container can be done a large number of indispensable tools, which are actively used in the process of dacha work.
To make this tool we only need sharp knife and the container itself.
Stage 1. Cut off the bottom of the canister.
Stage 2. Mark a cut line for the scoop on the container so that the handle of the canister is the handle of the future tool.
Stage 3. Cut off excess material.
Due to these simple actions we get an excellent scoop with a comfortable handle.
Materials:
Manufacturing
Step 1. Wash the canister thoroughly so that no odor remains in it.
Stage 2. Cut the canister vertically into two parts.
Stage 3. We make a groove on the board using a woodworking machine.
Stage 4. Apply glue to the plywood and insert it into the bottom of the canister.
Stage 5. Paint the resulting shelf using a spray can.
Of course, this design will not withstand a lot of weight, but it is quite suitable for storing small parts.
Materials:
- 40 cans;
- scissors;
- rope;
- paper;
- marker.
Stage 1. Pierce the top of the canisters with a knife.
Stage 2. Make a stencil from paper.
Stage 3. Apply it to the canister and outline it with a marker.
Stage 4. Cut out large holes using scissors.
Stage 5. We stack the prepared canisters in several rows, tying each row by hooking a rope under the handles of the containers.
Stage 6. We tie all the rows around the perimeter for greater strength.
Stage 7. If you plan to lean the cabinet against the wall, then drill it to the surface.
Stage 8. Place heavy objects - stones or bricks - in the bottom row.
The result is a fairly spacious and functional rack that will help get rid of the problem of storing many small parts.
Be resourceful and bold in implementing your ideas. Good luck!
Video – DIY crafts for a summer cottage
Video - We do it ourselves for the dacha
Homemade products for the home are not very popular among city residents.
After all, today the market of all kinds of goods is represented by a wide range of products, among which it is easy to choose something suitable for yourself.
However, in order not to spend extra amounts of money on trifles, as well as to improve your own craftsmanship skills, you can create all these items with your own hands.
Among the useful homemade products you can find are:
- design elements that will fit into your interior in the best way, because you will create them based on your own wishes;
- household items you no longer have to buy at the store;
- homemade products for the home will become decorations for the appearance of the apartment or.
Homemade crafts
DIY crafts can be very different. From beauty to practicality there can be one step in their development, and interesting shelves made from coffee cans are proof of this. For this craft you will need:
- several tin cans (at least 6 pieces);
- glue;
- a drill or other tool that can be used to make holes in cans.
Let's start creating homemade shelf from making holes. On the back (bottom) of each jar you need to make a hole, which will serve as a fastener to the wall.
However, it is not at all necessary to make a hole in each jar, but if your shelf has big sizes, there must be at least 2 of them.
Instead of glue, you can use a drill and drill a hole in each can, which will be fastened together with nuts and screws, but with glue, of course, it’s easier to work with.
To prevent your homemade project from unexpectedly falling apart while still on the wall, you should use very strong glue, such as the one used in shoe repair. can consist not only of tin cans, but also of glass.
Glass jars can be a useful homemade product for storing small items.
Useful homemade crafts for the home - a house for a cat
If you have a pet in your house, and somewhere in the pantry or on a mountain there is an old monitor collecting dust that has not worked for a long time or will never be used, you can quickly turn it into a house for a cat.
To do this, simply unscrew the screws of the device, remove the case and separate it from the inside, including the screen. Next, we connect the body parts with the same screws, thoroughly wipe the monitor from dust and begin decorating.
As a decoration for a cat's house you can take regular paint, which covers the entire surface of the house you created. But there is another way: take watercolors and decorate the former monitor with patterns of your choice.
Hanger - homemade do it yourself from buttons
For button hangers we need:
- homemade buttons;
- spray paint;
- Super glue;
- hanger.
You can cover the hanger with fabric and sew buttons on the fabric, it also looks quite beautiful.
.jpg)
Thread hangers
This is the hanger itself. You need thick threads with which you will wrap the hanger and get a wonderful homemade product made with your own hands.
To secure the threads, first apply PVA glue to the hanger.
All homemade products for the home are very useful, as they give new life old things and bring beauty and creativity into your home.
Everyone is used to treating their home as a fortress, cozy place, where you can escape from the hustle and bustle and worries. It's doubly nice when own home it is lived in, everything in it is done according to the owner’s wishes and the necessary things are at hand. It’s nice to return to such a house after a working day or a long vacation; the atmosphere in it is calming and bewitching.
In contact with
You can decorate your own home with your own hands. Homemade products for household – It is not simple interesting idea for author's design, such things are gaining popularity in the world and even the most famous designers are hunting for “masters” capable of producing a real work of art. In addition, such cute organizers really make cleaning easier and help organize materials for hobbies, books, trinkets and jewelry. There are a great many options for DIY home crafts; each author brings something of his own to the project, but in the end the result is always something warm, homely and cozy.
Options for craft organizers for the home
There are several variations of various crafts made from metal, clay and plastic, but all of them are aimed at a single goal - to make a person’s life in the house easier and more comfortable. That's why All DIY home crafts can be roughly classified into:
Ultimately you can make a craft just like that without bothering to find her useful application. Ultimately, making useful things for the home with your own hands from wood, metal, plastic, etc. is just a hobby, which, however, can become the main one for a business.
As for where to get materials and tools, fortunately, the modern market infrastructure allows you to find absolutely everything for needlework or carpentry at the nearest store.
Stool-box for tools
Among the homemade crafts that you can do with your own hands, toolbox- this is probably the first thing you should do home handyman. This stool is extremely functional and easy to create, cost Supplies not comparable with market price a good chair, and due to its extremely primitive design, the bench will last quite a long time. All that is needed to make such a homemade product for your home is:
- screws, 20-26 pieces;
- sleds, 4 pieces;
- block of wood, 17 pieces;
- wooden panel, 9 pieces;
- screwdriver, hammer, varnish, brush.
For such a homemade product, you should choose a tree that is easy to work with, that is pine or beech. Hard wood species, for example, oak, are extremely undesirable, since it is incredibly difficult to work with at home, not to mention the fact that carrying out complete processing with your own hands is a time-consuming task.
From the bars you need to make four U-shaped blanks, one larger than the other. This is the base of the bench and the steps on the sled. Then you need to strengthen the legs with an additional block. For the step, attach the slide to it on both sides. Make a niche in the form of a small box under the seat of the stool, then screw the side panels. Coat the finished homemade product with varnish.
Cooler bag
This homemade product will be useful on any trip.. Buying it is expensive, since the cost of even the simplest one is higher than the price of consumables. And in order to make a bag yourself, you only need a few simple elements:
- roll of insulation;
- old bag;
- tape and scissors.
It is recommended to choose from insulation options foamed polyethylene, widely applicable for household purposes. 1-2 meters of this material is enough. From the insulation you need to make a cross with a central part, and then pack it in an old bag. It is better to cut off the “lid” of the homemade product and attach it with tape, fill the side joints with the remains of insulation or foam rubber. You can make such a homemade product yourself in 20 minutes, no more, and in terms of efficiency it is in no way inferior to store-bought counterparts, since the insulation is excellent insulating material.
Cat scratching post house
Wooden claw house- this is the most productive way to keep all other items in the house intact, leaving your pet to be torn to pieces new toy. Making it is quite simple, since there are many variations of the project. For entry level One house with a cylindrical scratching post is enough. To do this you will need:
- wooden panel, 5 pieces;
- cylindrical block, 1 piece;
- wooden slats, 12 pieces.
The simplest house with square roof, but you can complete a more complex project for your pet - with sloping top or several levels.
Before work wooden elements should be covered with carpet, it is better to do this with self-tapping screws, but making sure that their tips do not peek out and will not damage the pet’s paws. One of the panels will act as a base, the “foundation” of the house is mounted on it - 4 slats, a panel is attached to each of the slats, then another level of slats should be added on top and the structure should be covered with a roof. Installation takes place using corners or self-tapping screws. An entrance should be drilled or cut out in the front panel. Secure the cylinder near the entrance, then wrap the twine around the special glue.
Options useful crafts so many, most of the options are copyrighted and were invented literally out of necessity, that is, to solve a specific problem. In order to come up with something of your own, it is enough to overcome laziness and pay attention to those problems that interfere with living in own home, and then solve them on your own, because it’s very nice.