Wood is a material that is very popular for the construction of private houses. Although stone and brick are also popular, many people prefer timber, which creates a unique look for the home. But after the construction of the building, it is important to take care of the interior decoration of the house. For it to be successful, it is important to take into account all the features of a material such as timber and choose the most suitable type finishing. All possible options and the nuances of the interior design of the house will be discussed further.

Peculiarities

A house made of timber has a number of characteristics that are not typical for houses made of other materials. Among them there are both positive and negative qualities. The advantages of wood include:

• The material is environmentally friendly.
• A house built from timber has a very presentable appearance.
• Constructing a building from wood elements takes less time than working with other materials.
• There is no need to spend a lot of time laying an expensive foundation, since the timber will not create large loads.
• Compared to other materials, wood has a lower price.

The following points are considered as nuances that cause difficulties:

When the building is erected, all the internal work to be performed must be carefully planned. The main procedures for interior arrangement and finishing include:

• Laying communication systems. These include heating, sewerage, electricity, and water supply systems.

• Coating walls with special compounds and antiseptics that protect against fire.

• If desired, you can carry out thermal insulation and waterproofing of the floor and walls.

• Next, the subfloor is laid.

• To make the work more organized, it is recommended to prepare in advance a project for the arrangement and finishing of all rooms.

• Partitions and other additional structures are being installed.

• Walls, ceilings and floors must be carefully prepared before decorative finishing.
• After this, the finishing itself is carried out.

The interior decoration of a building made of timber as a whole is a rather labor-intensive process, so it is important to describe in detail all stages of the work, as well as to choose the right material for finishing various surfaces.

Types of materials

There are many materials that are used for the interior decoration of a private house made of wooden blocks. Each raw material has its own special characteristics and is primarily used for a specific type of coating. The most popular finishing materials wooden house are:

• lining made of plastic and wood;
• drywall;
• block house;
• decorative plaster;
• decorative rock;
• vinyl siding;
• dye;
• tinting compounds;
• varnish coatings;
• laminate;
• linoleum.

photos

Wooden lining laid on a special crate made of wood. Using nails, slats and grooves, the beams are connected to each other and attached to the sheathing. The lining is made from various types of wood, which include pine, spruce, linden, and alder. The material significantly affects the appearance, strength and class to which the products belong. IN The following classification is distinguished:

• Extra class. Lining that has no defects.
• Class A. Implies high quality, and even the presence of small knots does not spoil general form coverings.
• Class B. Average quality, knots in products are more common.
• The lowest class is C. It implies the presence in the material not only of knots and irregularities, but also of color variations.

Vinyl siding or plastic lining They are excellent for installation in rooms with various purposes, since these coatings are resistant to various influences. In addition, they create an additional layer of heat due to the voids present in the structure. Installation plastic lining carried out on a metal frame. The material with a vinyl surface is resistant to moisture and sun rays. Plus, it comes in a variety of color options.

The special material is decorative fake diamond , which is made from various raw materials. This material mainly plays an accent role in the finishing of profiled timber. The stone is placed on the sheathing, imitating various rocks. Using this coating, zones are identified in large rooms, and also accents are placed in the interior.

It is quite difficult to install such material yourself, so it is recommended to invite professionals for such work.

It is also worth paying attention to what kind of timber the structure of the house itself is made of. The beam can be made from different varieties wood The most popular is pine. It has the following characteristics:

• Due to the soft structure of wood fibers, the material is excellent for processing.
• This wood is strong and forms a completely reliable frame for the home.
• Pine beams are environmentally friendly; they do not emit substances harmful to human health.
• The shade of pine beams is usually uniform. Most often, natural material is painted in warm colors.
• In front of everyone positive characteristics pine wood is sold at a price that is very affordable for most of the population.

Among other types of wood for construction timber house cedar, larch, spruce, and fir are popular. In many ways, their characteristics are similar to pine. Also, the beams can be laid according to various technologies, which determine the choice of suitable material for interior decoration.

Drywall is a very flexible and plastic raw material for decorating a house from ordinary beams. Before laying it, it is necessary to carefully treat the surface of the walls. The material is attached to a special frame structure. Most often it is used as wooden sheathing, a layer of insulation is laid in the space between the drywall and the wall. The GLK sheets are fastened using screws, and the seams between them are subsequently processed plaster compositions and become less noticeable.

Many compositions are suitable for the finishing coating. Drywall is popular not only for finishing walls, but also for ceilings.

Alternative material for the frame is rounded laminated veneer lumber. Its difference from the standard one is that the construction in this case practically does not shrink. Walls made from such beams turn out smooth and elegant, so their texture is most often left visible during interior decoration.

Such a timber surface is treated with a special primer, and then paint and varnish mixtures are applied in several layers, which serve not only as a means of decoration, but also protect the surface from various influences. For the floor of such a home, laminate, ceramics or parquet boards. And the ceiling can be decorated using GLK or lining.

Some owners of private houses decorate their interiors using imitation timber relief. To create it use block house- a type of lining, which is a planed board, one side of which ideally imitates timber. The block house is installed on the sheathing, but it is not necessary to place it in all cases. It will be needed for laying a thermal insulation layer or masking communications. The sheathing is made from small bars or galvanized profiles.

The difference between a block house and an ordinary lining is that the latter can be laid both horizontally and vertically. The imitation timber is placed only in the horizontal direction.

Also, materials such as MDF or siding are used as imitation, but the block house has the greatest resemblance to natural bars.

Projects

To get a seamless and organic interior, it is recommended to design each room in advance and choose the most suitable style directions. In the design country house will become a relevant option chalet or hunting style . It looks very brutal and involves a combination of materials such as wood and stone in the design of the walls. Most often, rooms are decorated with clapboards, the walls are decorated with various hunting attributes, for example, animal heads or hunting equipment.

Russian style looks good in decoration interior decoration private house. It assumes the presence of a structure of beams on the walls. It is permissible to decorate the floors with laminate, imitating large boards. There must be a massive stove in the center of the room.

A house of this type can also be decorated in European, Scandinavian or provencal style . In these cases, a special feature will be the trim made of lining or siding in light shades. Sometimes a small number is welcome bright accents. Windows are decorated with light screens or curtains.

In style minimalism As a rule, large features dominate. This applies not only to the surface texture itself, which can look like beams, but also to other details, for example, windows and furniture. Having decided on the features of styles, you can choose the most suitable option to decorate your home.

How to sheathe?

No less important than the choice of material and style is the process of covering various surfaces of a wooden house with your own hands. The features of this procedure depend on the selected area. The main surfaces for decoration include walls, floors, and ceilings.

Ceiling

It is better to start the process of decorating surfaces from the ceiling, especially if you prefer to paint the ceiling and walls, or varnish them. The ceiling can also be sheathed with plasterboard and tension structures can be created.

If the ceiling is painted, its surface must be thoroughly cleaned and coated with a primer. After 24 hours, when it is dry, you can begin the painting process. To do this, use a long-haired roller. The process itself must be carried out quite quickly, since the paint quickly hardens on the ceiling surface. In this case, it is advisable to have an assistant who could point out color unevenness during painting (they can only be seen from below).

Instead of paint, the ceiling can be finished with clear varnish to highlight the structure of the wood fibers.

Walls

The walls of the room can be decorated various materials. But regardless of the selected raw material, it is important to remember that the first stage of work involves cleaning and degreasing the surface. The process of preparing walls also includes laying insulation and a waterproofing layer, and treating with putty. Some people prefer to simply plaster the inside of the house. But in this case it is worth remembering that it is not recommended to apply plaster soon after the construction of the house.

When covering beams with varnish or paint, the material should be applied in the direction of the wood grain.

A roller can be used to apply coloring compounds, but for treating corners and hard-to-reach areas it is better to work with a brush. When choosing a varnish, pay attention to the content of harmful substances in it, as well as the texture itself, which can be glossy, semi-gloss or matte. Often, fabric wallpaper is even glued onto the leveled surfaces.

Floor

The arrangement of the floor is also very important point interior decoration of a house made of timber. In a private house there are two types of flooring – rough and finished.

The rough design represents the base. It consists of logs, between which a layer of waterproofing and insulation is placed. These layers are then covered with boards. For a private building It is recommended to make the floor with a double structure, since it is more capable of retaining heat. The finishing coat is applied directly to the boards.

Finishing is carried out in several stages.

1. Laying a layer of waterproofing on the subfloor boards. The material can be a polymer membrane made of film or roofing felt.
2. Installation of timber installed on an edge rectangular section 5 x 10 cm. The design features of this layer depend on the specific finishing coating.
3. Reliable fastening of the power set to the floor. To carry out this type of work, it is recommended to use self-tapping screws of the appropriate size.
4. Laying insulation in free space. Mineral fiber, rolled glass wool or even polystyrene foam can be used as a heat insulator.
5. Laying the finishing layer is the final stage.

The interior decoration of a house made of timber is a continuation construction work for the assembly of structures, which must be completed by this stage. This is a very responsible process, because it is the mission of giving the living space comfort and coziness in accordance with the given design. In our article you will find useful information on this topic and find out where to start the upcoming renovation.

Front of work inside a timber house

Finishing the floor, walls and ceiling in a log house made of laminated or profiled timber is done by hand in several stages:

1. laying communication highways ( electrical cable, pipeline, heating system, sewerage, air conditioning);
2. wood impregnation antiseptics for protection against fire, insects, mold and fungi;
3. installation of heat and waterproofing material;
4. preparing walls, floors and ceilings for application finishing;
5. installation of interior doors;
6. finishing of floors, walls and ceilings.

Without specific skills and necessary knowledge When renovating premises, it is better to seek help from professionals, especially if we're talking about about communications. If you are confident in your abilities and do not want to overpay, you can safely do the work yourself. It is advisable to decide on the design and think through every detail of the interior before starting. This measure will help you have an idea of ​​the future result and calculate required amount material intended for these purposes.

Features of interior decoration

The finishing of a timber house is carried out with the same materials as in houses made of brick or any other building material, but despite this, there are a number of features that need to be taken into account in the process of finishing walls and other objects:

• the inevitability of primary shrinkage of houses made of profiled timber, which is more significant than in other buildings. In this case, you may need at least two, and
• a maximum of six years of waiting before finishing can begin;
• secondary shrinkage, not exceeding 1% of the floor height, is therefore practically not noticeable.

In the first case, the shrinkage of the timber and the reduction in its volume are to blame, during which the gaps between the logs narrow due to constant effective load. When the shrinkage of a house made of profiled timber is completed, you can detect a decrease in floor height by 2 - 3 cm (in houses made of laminated timber this figure can be 1-2 cm, check with the manufacturer). Such deformation negatively affects the finish, as a result of which the plaster becomes covered with cracks and the tiles fall off the walls. To avoid a long wait, it is better to build the frame of a wooden house from laminated veneer lumber, and then the shrinkage will last no more than 12 months. Secondary shrinkage is provoked by temperature changes and wood humidity, but it does not affect decorative facing materials.

Selection of materials for interior finishing of a log house

The choice of stylistic direction and decor depends on the personal preferences of the home owners or on the design development of specialists who approve the project with the home owners. We will introduce you to the step-by-step finishing process and the most popular materials used for these purposes.

Floor installation

Before laying the flooring, you need to raise the level of the subfloor with a heat and waterproofing layer, which is covered with boards. This simple and uncomplicated design perfectly retains heat and absorbs outside noise. The most commonly chosen floor finishes are:

1. Planed sheet piling lumber. This is an environmentally friendly board that is not afraid of moisture, and its structure allows the floor to “breathe”. It is durable, long-lasting and easy to maintain. There is a wide selection of colors and textures on sale. Over time, the tongue and groove board can be puttied and sanded, which allows you to update appearance flooring. This material is not suitable for those who plan to install underfloor heating, since here all the heat will be spent on heating the tongue and groove.
2. Laminate or parquet board. In this case, there are no obstacles to installing a “warm floor”. When choosing a coating with high thermal conductivity, look for the corresponding marking on its packaging. Experts advise laying a wood floor from the inside of a wooden house.

After installation finishing material skirting boards are installed that will hide the technological opening with insulation between the wall and the floor. Before nailing the baseboard, the exposed insulation must be cut off, if any. To prevent the appearance of a sound bridge, the baseboard must be fixed either to the floor or to the wall. Otherwise, you may encounter extraneous noise, especially if you haven’t done it.

Wall decoration

We remind you once again that all wooden elements in a timber house, both outside and inside, must be treated with an antiseptic, and this rule applies primarily to walls. Now let's move on to the selection of materials that can serve as:

• Treated wood, from which the structure is erected. Indeed, if the surface of the walls has no defects, it can be left in its original form. The main thing that is required of you is to ensure that the timber is impregnated with a tinting agent to obtain the desired shade.
• Dye. In addition to the decorative effect, staining protects the wood structure from harmful microorganisms. We advise you to purchase paint and varnish products with a low content of harmful components (a list of them is freely available on the Internet).
• Plaster. Can be applied to surfaces 12 months after completion of construction. Here Special attention applies to waterproofing wooden materials.
• Lining or block house. They are installed if the owners for some reason are not satisfied with the condition of the walls, because these materials are essentially imitation boards and logs, and if you have an excellent surface of profiled or laminated timber, there is no point in resorting to their help. The lining can be installed after the box has shrinked, having previously provided a frame for securing the boards. Read more about.
• Wood Wall Panels. Produced without glue from natural raw materials, they have excellent thermal insulation properties, are easy to install and cope with sound absorption. The top of the panels can be covered with vinyl or textile wallpaper;
• LGC. Putty is applied to the drywall, and then wallpaper is glued or water-based paint. In damp rooms, install moisture-resistant material. Environmentally friendly sheets are fixed to a frame made of wooden planks or metal profiles. Thanks to this design, the timber does not come into contact with the drywall, which eliminates the appearance of cracks on it. In the resulting gap, you can hide wires and pipes, as well as lay insulation, which is why interior decoration houses made of timber will only benefit. Read more about.

Ceiling finishing

Nowadays it is very popular to decorate the ceiling with beams made of wood, polyurethane or polystyrene, especially if the home is decorated in Provence, country and loft styles. There are also natural beam floors, and not their imitation, which can be successfully used when finishing a house made of timber with your own hands. If these stylistic options do not suit you, and you want to hide the floor supports, and the house has not given final shrinkage, it is better to give preference to tension or plasterboard construction, which do not interfere with the shrinkage process and are not deformed during this period.

Please note that during the shrinkage period, the force in ceiling beams is redistributed, so the plaster can be applied with your own hands only after it is finished, otherwise the finish will fall off.

We have provided you with the most popular finishing options and introduced you to suitable materials, so now you know exactly how to decorate the interior of a house made from laminated veneer lumber or profiled timber.

Interior decoration of a house made of timber (interior decoration of a timber house)

Houses made of timber are most often finished with clapboard, imitation timber or other natural materials. The peculiarities of the interior decoration of a house made of timber include that when using dry profiled timber, the inner side of the walls can not be covered with clapboard, but simply sanded and painted. Less commonly, a house made of profiled timber is finished with plasterboard, tiles, etc. This is partly due to the fact that the walls look beautiful and natural without finishing. It is also worth noting that the interior decoration of a house made of timber usually begins after the house has settled.

Interior decoration of a frame house

Manufactured houses frame technology, do not shrink. That is, if a frame house set is made of dry wood, then it will not change its size and shape at all. And to any finishing works You can start immediately after installing the roof.

If the frame of the house is made of lumber natural humidity, then as the wood dries, the gaps in the joints may increase. In this case facade works and interior finishing of a frame house are available after natural shrinkage of the frame. (3-6 months)

Interior decoration of a house from SIP panels

Houses made from SIP panels are the same frame houses only in them as wall material a SIP panel (structural insulating panel) is used, consisting of a layer of insulation, covered on both sides with OSB sheets. As is the case with frame houses You can begin interior finishing of a house from SIP panels immediately after completion of construction work; no time for shrinkage is required.

Interior decoration of a log house

Most the best option for a log house there will be sanding and coating of walls special compounds and caulk decorative rope. Simply put, preserving and enhancing the natural beauty of wood. But in some cases, plating is performed log house plasterboard, MDF, finishing tiles in bathrooms and other similar materials.

Finishing nuances

It is possible to begin finishing the inside of a wooden house only after painstakingly studying the topic: methods, technologies. The materials used for wall cladding are those that allow air to pass through and create good microcirculation.

If you use sealed materials, the walls of the house simply stop breathing. These rules fully apply to the insulation process and external treatment. If the structure does not allow air to pass through, then the greenhouse effect is inevitable. The problem can be solved with the help of forced ventilation, which means that significant investments, loss of time, and the need to control the quality of ventilation will be required.

When carrying out interior decoration of a wooden house, you need to use lightweight materials that will not increase the load on the foundation.

Start of the process

Finishing is possible after the end of the active stage of shrinkage. This rule applies to a new, newly built house. If you have to process old design, then you can start immediately. It is important to consider the following:

• If the base of the house is a log and ordinary timber, then ideally the finishing starts no earlier than a year.
• If the base of the house is dry profiled or laminated timber, you can start in 1-2 months.

It is necessary to take into account climatic features, average temperature, humidity indicators. Finishing the interior of walls made of logs and ordinary timber allowed upon completion of caulking.

The work involves two stages:

• First, the caulking process is carried out several weeks after the walls are assembled.
• The second part begins at least 6 months later - after shrinkage.

To caulk walls, you need a material with heat-insulating and sealing properties. Tow and jute meet all the criteria for high quality. They are widespread due to their affordable cost, unpretentiousness, and durability. It also happens in practice that some people use moss as a material for caulking because... there were no more modern substitutes.

Work is carried out from the outside and inside at the same time, you need to start from the bottom. As soon as the crown is ready on one side, it is worth moving to the other side - this will help avoid distortion.

When the work is completed, the object will rise a few centimeters, but soon the inter-crown filler will become more dense and the original height will return. Drafts will practically not make themselves felt due to the tight fit of the timber or log; this will significantly increase the thermal insulation performance.

Caulk wooden walls — special kind activities, implying its own technologies and nuances, you can find out more about this in the article. As soon as the second caulking is completed, you need to measure the height of the walls from time to time. If the data has not changed within a couple of months, it means that the shrinkage has ended and finishing can begin.

Preparation for finishing

It is not always advisable to veneer walls from the inside. If interventional insulation invisible, and the design is neat and tidy, then the cladding can be abandoned and replaced with cheaper, more practical ones paint and varnish compositions. However, if the caulking seams are unattractive, there are surface defects, and the texture is uneven, then only finishing will correct the situation.

It is very important to protect tree species from mold and mildew, regardless of the characteristics of the materials used. Manufacturers offer effective, safe, inexpensive antiseptics especially for such purposes. Additionally, you can take fire retardants, which, as the name suggests, make the texture non-flammable.

Types of finishes

Decorating a house with your own hands is not one, but several options:

• Drywall.
• Wall panels.
• Lining of different shapes.

Regardless of the specifics of the materials, it is required to install the frame on the surface. Wood has proven itself ideal. Yes, some technologies involve abandoning the frame, but the base must be perfectly flat, without chips or protrusions. Sheathing on the frame is advisable because:

• It will allow you to hide the wiring.
• Provides clearance for wall drying and air circulation.
• You don't have to make the base level.
• It is convenient to install thermal insulation materials.

It also has its own characteristics. So, there is a chance that rodents and insects will appear in the gap and additional measures will have to be taken to get rid of it. Wood paneling at home implies the presence of a small gap near the ceiling, this reduces the occurrence of shrinkage and deformation. The optimal width is 2-4 cm; this space can be easily hidden by installing a decorative plinth.

Sheathing using lining

Interior decoration of a house with wood is a great variety. Lining guarantees an abundance of shapes, widths, and special textures depending on the type of wood. You can divide the lining based on the transverse profile into the following types:

• American.
• Landhouse.
• Blockhouse.
• Standard.
• Softline, etc.

The fastenings are also different:

• Using clamps.
• Using screws and nails at an angle.
• Nails into the face. This method is not very common because it is considered not very attractive from an aesthetic point of view.

Self-tapping screws with nails and clamps are not simple; it is necessary to fasten them and prevent deformation of the lining on the front side.

Self-tapping screws or nails are often replaced with special construction staplers with staples. This allows the use of staples with a narrow part on the “back” side and with long legs. The fastening materials are based on special metal compounds, steel with anti-corrosion treatment.

Wood is used as the basis for the lining, which means shrinkage is also relevant. If chamber drying has been carried out, the material will be of the highest quality. However, to purchase lining that has passed chamber drying, is not so simple, which is why many homeowners who are decorating choose more available options. The following nuances need to be taken into account:

• When securing initially, you need to remember that the cladding will have to be dismantled, so it’s worth deciding on suitable tools: screws or nails.
• If you follow aesthetic considerations, you can dismantle the lining and then nail it again.
• It is possible to leave the surfaces in natural form- as it is.
• If natural drying has taken place, then gaps will appear between the finishing elements.

Features of wall panels

Wall panels - a wide variety design solutions, the ability to implement projects of any complexity. Perhaps this is one of the favorite options of designers, since it does not limit imagination. If we talk about finishing a wooden house using wall panels, then you need to correctly determine the type:

• Leather.
• Plastic.
• Glass.
• Bamboo.
• Wood.

Each option has its own specifics, for example, if you choose glass, you should be especially careful and take precautions. In addition, the glass is massive, which means it has an impact on load-bearing structure. If the wall fencing is miniature and thin, then it is better to abandon this option.

Features of drywall

Drywall is used very actively, it is inexpensive, lightweight, and beautiful. Nuances:

• It is not very durable or resistant to mechanical stress. Ideally, it should be sheathed only 2 years after the construction of the object. Plus, the operating mode should be normal, with the heating on.
• When installing sheathing after 1-2 years from the date of construction, you need to install drywall on a floating frame. This significantly reduces the risk of movement of the trim and base relative to each other.

In problem areas, cracks should not open, which is achieved by gluing with a reinforcing mesh. It is inexpensive, its base is polymers, and with its help, seams, joints, and corners are reinforced.

If possible, it is better to use slats and bars made of wood. If taken metallic profile, then waterproofing measures are carried out: general rule states that if materials with excellent properties come into contact with each other, waterproofing is necessary.

Old wooden buildings

If you work with old wooden houses, then you need to objectively assess the condition of the object, in particular the walls, provide additional protection, identify suspicious areas, and further investigate them. A chisel, knife, and screwdriver will come in handy. The following are considered problem areas:

• The density of which is different.
• The texture of which is different.
• The area is darker or lighter than the rest.

Sometimes you have to deal with the fact that wood fibers crumble and become thinner. In such cases, it is better to consult a specialist to determine the extent of the damage. If no serious defects have been identified, then it is enough to treat the base with an antiseptic.

If you have any questions about interior decoration frame houses. Write to us.

Qualitative timber house with finishingFull construction Busy people who don’t have time to do repairs on their own prefer to purchase. In this case, for a relatively small additional payment, the client will receive a cottage with fully finished interior decoration. You will need to bring furniture, arrange it to your liking and you can start living in this wonderful house.

The SK Domostroy company offers its clients turnkey construction of houses at the best prices. You can see photos of the interior decoration of the house on the website.

How is the interior finishing of houses made of timber carried out at SK Domostroy?

Interior decoration of a house made of profiled timber at SK Domostroy, construction begins only after the house has completely settled. Only then can you begin installing doors and windows and other types of finishing work.

For example, only environmentally friendly materials are used for repairs that will not harm the health and life of customers. All work carried out is agreed upon with the client, and he can independently monitor the progress of all operations performed.

Construction and finishing of a wooden house or bathhouse on a turnkey basis - rational decision for those who save money and time. The craftsmen of the MariSrub company have the necessary skills and knowledge that guarantee high-quality internal and external finishing of the building, reliable installation communication systems. We carry out a full range of tasks.

Design

Choose finished project Houses. The firm's architect will make the necessary changes taking into account the characteristics of the land plot and the client's wishes. For you, spacious one- and two-story cottages, houses and bathhouses with an attic, projects with a garage, terraces and balconies, country houses and guest houses, original gazebos. Didn't like any of the projects? Order custom design!

When you order turnkey construction, we carry out the project for free!

Production

The MariSrub company independently produces and processes lumber. Own production- guarantee low prices and quality of logs, because specialists monitor every stage of production. Wood is carefully selected and sorted. Logs are treated with special protective equipment, which will protect the material from negative external influences during storage and transportation.

The foundation determines performance characteristics and the service life of the building. Therefore, the choice of materials and installation of the structure must be approached very responsibly. “MariSrub” specialists will help you choose the appropriate type of foundation and perform the installation efficiently and reliably. We provide a full range of work:

• Study of the land plot and design of the foundation;

• Preparation of the base;

• Laying of the structure and cladding.

Before pouring, specialists will determine the location of the wooden house or bathhouse, develop a project and carry out work to study the soil. The choice of design depends on the characteristics of the land and soil. We offer installation of strip, screw, pile-grillage and slab foundations.

Assembly and installation of a log house

Professional builders will quickly and efficiently install a log house from rounded and log houses on plot of land. The great advantage of a log house is the speed of assembly and construction of the log house. Installation will take only 2-7 days depending on the complexity and area of ​​the project. Installation of the log house will be carried out in compliance with the norms and requirements for construction wooden houses. Competent approach and great experience guarantee the reliability of the construction!

Roof installation and roofing work

Engineers design the roof and rafter system taking into account wind loads, precipitation and weather conditions characteristic of the region. The experts will install a reliable truss structure and install a high-quality vapor barrier. In addition, they will help you choose the right roofing covering, components and additional materials for construction. These are reliable and durable elements that harmoniously combine with each other and with the house.

We carry out installation of sheathing, arrangement drainpipes, gutters and snow retainers, flashing cornices and other types of finishing work, installation of skylights.

Installation of communications

Communications are carried out after shrinkage of the log house, which takes 6-12 months. MariSrub engineers will carry out step-by-step competent design and installation in strict accordance with established standards and rules of the following systems:

• Electricity, closed and open wiring, laying the input cable in a trench and over the air, installing devices and elements (sockets, switches, etc.);
• Natural and supply and exhaust (forced) ventilation, installation of ventilation devices;
• Water and electric heating, pipe laying;
• Water supply from central water supply or an autonomous source, installation of wells and boreholes, installation of filters and pipes;
• Sewerage, installation of local treatment facilities, laying pipes and connecting plumbing.

Experts will carefully consider the rational arrangement of systems, which will save on installation and further operation of the wooden house. In addition, a well-thought-out arrangement of communications will make life easy and comfortable.

Interior and exterior finishing

Internal and external finishing wooden house goes through very carefully. It requires attention, time and effort. Includes the following works:

• Insulation and waterproofing of the house;
• Installation of window and door openings;
• Installation of windows, entrance and interior doors;
• Installation of stairs, fences and railings;
• Finishing floors, walls and ceilings in living rooms and the bathroom.

Particular attention must be paid to working with walls. Log walls require caulking and sealing of seams, sanding and coating with protective agents (anti-foam, antiseptics and others). Only after such preparation can the walls be sheathed or left in their natural form, only covered with decorative varnish or paint.

Finishing baths and saunas

When finishing a bath or sauna, it is important to properly treat the surface of the logs. After all, in such a room there is high humidity and frequent temperature changes. The experience and professionalism of the masters of the MariSrub company will allow you to achieve beautiful view and durability of the structure, pleasant atmosphere and comfort inside. They will pick you up suitable material, which will not overheat and will not burn even with high temperatures, will withstand high humidity and will not rot.

In addition, we carry out the arrangement of baths and saunas. We provide hydro- and thermal insulation, install stoves and chimneys, and treat the premises with special protective agents. We carry out installation engineering systems, installation of windows and doors, covering walls, floors and ceilings.

The MariSrub company will perform a full range of construction and finishing works country houses and wooden baths. Own production, professionalism and experience of specialists, individual approach And affordable prices- a guarantee of a durable, reliable and aesthetically attractive home!