An avid fisherman differs from an ordinary amateur in that in his arsenal you can find great amount fishing equipment. If he goes winter fishing, he will certainly need not only a tent, a fishing rod and an ice auger, but also fishing sled, which you can make yourself. Design features The model and its complexity will depend on the nature of the fishing and financial capabilities. However, such products still do not turn out to be expensive, because you can use materials that you can find in your barn.
How to move on crust and ice
If you want to go quite far, then it will not be possible to get there by road, so it is important to think about the optimal means for delivering fishing equipment. Navigating on the ice surface is not as easy as it might seem. This issue is easily resolved with the help of a sled. For some fishermen, they even become a place for overnight stay and rest, because in order to catch a trophy specimen, they sometimes have to stay far from home for several days.
Preparing tools and materials for making wooden sleds
If you want to make a fishing sled with your own hands, then you should prepare some tools and materials, among them the following should be highlighted:
- pine boards;
- sandpaper;
- drill;
- wood glue;
- electric jigsaw.
Step-by-step instruction
Two boards will act as runners, which need to be used in the first stage. The compass will allow you to draw semicircles that are cut using a jigsaw. To secure the transverse bars, holes are made on the runners. Their connection should be made using round probes using the gluing method.
The resulting structure should be strengthened at the back and front of the runners; for this, transverse strips are placed on the spikes. The design should look attractive, so after the glue has dried, the excess needs to be trimmed. A fishing sled must have a seat; a board can serve as it.
At the location where the equipment box is installed, grooves should be cut to connect to the runners. In order to achieve structural reinforcement, bars must be glued to the back of the skis. In places where the runners are rounded in the lower part, you need to strengthen an aluminum or steel strip with screws.
Before final assembly, the design should be reviewed to determine the accuracy of the connections. If there are elements that have been previously sanded, they should be coated with waterproof varnish. Fishing sleds must be tested for strength after completion of their production. To do this, all the equipment should be placed inside, because you wouldn’t want the product to fail at the most crucial moment.
Making sleds from aluminum
Fishing sleds should not only be functional, but also be light enough, because sometimes with their help a fisherman has to move on ice that can crack. For the manufacture of aluminum sleds, a sheet of appropriate material and profile should be used. The parameters must be selected based on the size of the equipment being transported and the parameters of the fishing box.
The design will have three main parts, namely:
- runners;
- bottom;
- two side walls.
Manufacturing will require compliance with certain rules. The work will require a bending device. You can get by with metal corners and a mallet. The side parts should be made identical and reinforced; the back wall is made according to the same principle. The aluminum bottom is cut out last. It is important to make the edges of the product safe; for this they are folded.
When winter fishing sleds are made, runners should also be made. They can be made from aluminum profile. To make bending the runners easier, slits should be made in some places. On final stage it is necessary to assemble the sled; for this you need to use nuts, bolts, and self-tapping screws for metal connections.
Refinement of plastic sleds
As practice shows, plastic fishing sleds are convenient in everything; with their help you can move fishing luggage over crust, ice and snow. Such structures are made in the form of a trough, are lightweight, and can withstand the impact low temperatures and may have different sizes. However, such sleds have one drawback, which is the lack of rope attachments. The correction of this disadvantage rests on the shoulders of the fisherman himself.
Fishing sleds can be supplemented by equipping them with appropriate fastenings. To do this, the required number of holes are drilled around the perimeter into which a metal cable with appropriate fasteners can be inserted. This will allow you to obtain strong and reliable fastenings for luggage rubber bands and rubber bands that are not subject to frost and corrosion.
To install a pulling rope along the front side of the sled, 2 eye bolts should be installed, and the rope will be attached to carabiners. Eye bolts should be installed using nuts, which will be reliable and quick to fasten. This modification of the fishing sled shows that over many years of operation the fastening system does not fail. Everything is held securely and firmly, the elements do not open, and using the sled becomes very convenient.
To pull the sled, it is better to prepare a 20-meter rope that folds in four. Using a carabiner you need to strengthen the eye bolts. This can help not only the fisherman himself, but also his companions who may fall through the ice. If you quickly release the rope, you will have a 20-m section available with which you can provide assistance.
Remaking old sleds
Homemade fishing sleds will be much easier to complete if you use an old sled as a base, which should have a frame and runners. The addition will be light plywood, a sheet that will be used to make partitions for the box. The plywood must be cut carefully so that it does not form creases along the edges.
The sled that will be complemented is secured to the runners using self-tapping screws; holes for them need to be made with a drill. The corners for the frame should be prepared. The walls of the box must be insulated using polystyrene foam or polystyrene foam. It is laid on glue. Then the inside of the box must be lined with plywood blanks. The design may have several compartments that are intended for:
- caught fish;
- warm clothes;
- tackle and bait;
- food supplies for fishing.
Once the box is ready, you can start working on the lid. It must be very strong, since this element often acts as a seat, and therefore it must withstand the weight of the fisherman. To avoid freezing, the seat should be insulated. To do this, foam rubber is placed on its surface and stitched with leatherette. Such a system can be strengthened with the staples of a furniture stapler. To make the sled more convenient during operation, you can strengthen the fishing rods and catch, as well as other gear on the body of the box. This will free up your hands when you fish.
After the sled is made, its bottom should be lubricated with silicone or ski lubricant. This will prevent snow from sticking. For road safety, reflective tape should be attached to the sled. Sometimes fishermen improve their sleds by equipping them with a folding chair. Fishing ones are not very common in Russia. There is a high chair on their metal runners. You can move around on such a sled according to the principle of a scooter.
You can make a sled for a snowmobile from plastic pipes. Welding them will allow the elements to be fastened together. When assembling, you can also use metal corners. The dimensions of such sleds should be determined taking into account the needs of the fisherman. The sled can also be equipped with compartments.
More information about snowmobile sleds
If you forked out money for a snowmobile, but didn’t have time to buy a sled, then you can make it yourself. A similar model was discussed above. Preparing plastic pipes for such a design, products with lengths of 1.8 and 7.5 m should be used. These components will be used for transverse connections. To ensure that the frame does not become skewed, it should be laid on a flat floor and all values should be measured. A sled that is too tall can tip over, while a sled that is too low can be difficult to ride. Therefore, you should make a structure with a height of 30 cm; this parameter will be optimal. When preparing the racks, it is necessary to make them in the amount of 8 pieces or more; the strength of the sled will depend on their number. The final size should be adjusted using a file.
Conclusion
You can easily make a fishing sleigh yourself; it can be expanded endlessly. For example, modifications include the back, as well as the trunk and even decorative elements. Such fishing sleds will be a budget option and an excellent alternative to factory products.
Finnish sleds differ from classic ones in that they have a raised seat and long runners. The person standing behind rests one foot on the runner of the sled, and pushes off with the other, as if on a scooter. For convenience, handles or a special frame for riding are attached to the seat. The stability and speed of the device allows you to comfortably ride alone or together, as well as carry luggage.
Contrary to the name, Finnish sled invented not in Finland, but in Sweden. Initially, such sleighs were a traditional means of transportation in Scandinavian countries. Now they are used for active rest in parks and skating rinks, transporting fishing equipment and just for fun in winter time.
Finnish fishing sleds have a modified design. They have less weight (up to 8.5 kg), the length of the runners is shorter (1.37 m), which simplifies both movement over long distances and transportation in a car. The design of the sled allows you to quickly move around smooth ice and trampled snow (up to 15 km/h). For better gliding on loose snow, plastic runners, similar to cross-country skis, are attached over steel ones.
The high seat and a special frame attached to it reduce the load on the back. A sled is also used instead of a comfortable fishing chair with a high back. On a sleigh you can comfortably transport the equipment necessary for fishing, and on the way back, the catch. For greater convenience, additional hooks and elastic bands are attached to secure the tackle box. Collapsible ones are especially convenient Finnish sleigh For fishing.
Technical characteristics and design features
There are two types of sleds: for walking and for fishing.
The walking version for adults weighs up to 10 kg, the length of the runners reaches 2 m. The design can withstand weight up to 180 kg. Sleds designed for children's entertainment are smaller in size. They are designed to carry weight up to 110 kg; accordingly, the runners are shorter (up to 1.55 m), the weight is also reduced.
Finnish fishing sleds are lighter than pleasure sleds (up to 8.5 kg), the length of the runners does not reach 1.4 m. This option can withstand 150-180 kg. Fans of winter underwater fishing often equip the structure with additional fastenings for cargo and use plastic covers on the runners. Finnish fishing sleds are also equipped with a motor and a special wheel, which increases the weight to 16 kg and increases the speed of movement to 40 km/h.
Both variations are durable: the racks and runners are made of metal, the seat and back are made of dried wood, coated with varnish or paint. For convenient transportation, folding models are made, which when disassembled take up minimal space.
How to make a Finnish sled with your own hands
Finnish sleds are simply designed: at home, a craftsman can independently make them for fishing or entertainment.
The choice of construction and design depends on skills and technical skills home handyman. The selection of materials and tools is determined by purpose vehicle: for fishermen, more durable and stable sleds are suitable than for riding. The walking version is made of wood or aluminum, but to make a Finnish fishing sled with your own hands, it is better to use steel as the main material.
Skids
The easiest way to make your own is to use old skis with a metal edge. 4 corners with pre-drilled holes for bolts are attached to the wooden runners.
For making sleds from aluminum steel You will need a pipe bender and welding. Also required is ribbed rubber for the footrest and footrest. From aluminum pipes the base bends: runners, footrests and chair mounts. Rubber is glued to the footrest and the back of the runners for an anti-slip effect, and holes are drilled for attaching the racks.
The most stable and durable structure will be made of metal. Skids are formed from bent sheet steel. A metal rod with threads at the ends is inserted into the holes drilled in the front part. To prevent slipping, as in the previous version, rubberized pads are attached.
Chair
Can be mounted on skids to save time and effort old chair, having previously marked and drilled holes for the bolts.
To make the seat and backrest yourself, you need to prepare wooden blocks or planks and cover them with paint or varnish. The wooden parts are attached to a frame made of aluminum pipes or metal. Holes are made in the finished chair for subsequent screwing to the runners and stand.
Racks
When finishing the production of a wooden sled, the backrest is extended with wooden blocks and a top bar made of the same material is installed.
For installation of aluminum vertical racks a frame is bent from pipes, boards are fastened with rivets, and holes are drilled at the bottom for screwing to the base. For convenience, the handles or crossbar are covered with porous rubber.
A stand made of metal plates and wooden blocks is fastened with screws, a horizontal bar is attached to the top or handles are made.
If folding sleds are made, wing nuts are used to attach the vertical posts and chair to the runners.
How to make your sled more comfortable
Finnish sleds are equipped with wide plastic attachments, which are used for riding on loose snow when the runners begin to sink.
The sled can be turned into a self-propelled one by adding motor parts. The engine and gas tank are mounted on a separate frame, and a wheel is additionally installed. The speed of such transport will be almost 3 times higher (up to 40 km/h).
To reduce the likelihood of injuries, in addition to covering the handles and footrest with rubber, an additional anti-slip platform for the feet is installed and a pad is put on the shoes.
To secure the load on the sled, add various fastenings, elastic bands, hooks. This option is used by fishermen to transport equipment.
What is better: homemade or purchased sleds
In order to make a Finnish sled with your own hands, you need to have the necessary skills, materials and tools. From positive aspects independent work You can note not only the money saved, but also the design, limited only by the imagination of the home craftsman.
The purchased sled will be stronger and more durable: factory ones are used for processing metal and wood technological processes. A wide range will allow you to choose a model with the desired functions and related accessories. Whatever the choice, Finnish sleds will be both fun winter entertainment for children and adults, and a faithful assistant in winter fishing.
Anyone who is engaged in running fishing for pike perch, perch and pike knows what a fishing sled is for. They are very convenient for transporting your belongings, necessary gear, tools and everything that goes along with winter fishing. Making a sled with your own hands is not difficult: you will need some materials, tools and basic skills in working with them. The need to manufacture them is due to the fact that almost all purchased products are not entirely convenient to use.
Sled for fishing from a box
Very simple and a budget option A sled for fishing in winter can be assembled from an ordinary plastic box. In addition to the box itself, the following materials will be needed:
- self-tapping screws;
- a piece of plywood;
- four bars with a cross section of 50 millimeters;
- a pair of old wooden skis.
The box must be polyethylene. You can check this as follows: remove small shavings from the box with a knife and set it on fire - the smell will be similar to the one that comes from the burning plastic bag. It is advisable that the box already has holes on the sides for ease of carrying. The plywood should cover about half of the box and will serve as a seat. You can attach some kind of soft pillow. The plywood is screwed with self-tapping screws onto three sides of the box, and the distance between the screws is 10 cm.
Four bars are screwed to the bottom of the box in order to secure the skis to them. It is better to screw bars that will be a little longer onto the back side. They are screwed from the inside: long bars are secured with three screws, and short bars with two.
It is best to attach wide mountain skis to these bars, since there are metal edges on the sides that prevent lateral sliding. Accordingly, if you install such skis on a fishing sled, they will not be blown away by the side wind. If you don’t have them, you can use regular ones, the main thing is that they are wooden. The screw caps must be “sinked” while screwing the skis.
To do this, first drill a through hole in the skis with a diameter slightly smaller than the screw, and then make a shallow pass with a diameter larger than the screw head.
Alternative design
To make another version of a sled from a plastic box, you will need slightly different materials. These include:
- two plastic pipes;
- toolbox;
- a piece of plywood and any soft material;
- self-tapping screws;
- rubber bands.
Instead of skis, two plastic pipes are installed at the bottom of this trough, which will provide better gliding on the snow. The tool case, which is screwed to the box, will serve both as a seat and as a place to store gear (fishing rods, hooks, balance beams). Plywood about 10 millimeters thick is screwed onto the top of the suitcase, and some soft material is attached to it to make it comfortable to sit on.
Such an improvised seat will not completely cover the sled, and there is enough space under it to put all the necessary things. The elastic bands are attached to two opposite walls of the box, and metal hooks are tied to them. Rubber bands are necessary to secure an ice screw or secure any bulky items placed in the sled.
It is better to make a through hole in the sled along its length in order to secure the claw. It is designed to test the strength of ice and is actively used during the first ice. In addition, such a claw will also come in handy when the ice is thick, because usually the diameter of fishing drills is about 100 millimeters, and if a fish is caught large sizes, then with the help of this claw you can widen the hole and thereby remove the caught fish.
It is better to immediately choose a longer rope for the sled, since a short rope is inconvenient during transitions. It is secured simply: you need to make two holes in the top of the sled, insert a rope and make knots at their ends in order to secure it. When moving between holes, a long rope is again inconvenient and can be easily shortened by making the knot a little higher.
In winter (especially on the first ice) you should never forget about safety. In view of this, a rope must always be secured to the sled in case someone falls through the ice. The length of the rope must be at least 20 meters. It is better to tie some kind of stick at its end. This is done to make it easier to throw the rope, since it does not fly well on its own, especially against the wind. In addition, it will be comfortable for a person to grab onto it.
This unique accessory is attached to the back of the sled and must always be taken with you. Even if we imagine a situation where the owner of the sled fell through the ice, those walking nearby can help by using his own rope, since the sled will remain on the surface of the ice.
Finnish homemade sleigh
As an option, you can make a Finnish sled with your own hands (finka), which is no less popular among fishermen. Their design is extremely simple and consists of three main components:
- skis;
- back;
- chair.
It is better to make the design collapsible so that it can be conveniently transported on the subway or in a car. Immediately before starting the manufacturing process, it is better to sketch out a drawing of the future sled.
Making a sled starts with the runners. You need to select two metal rods about a centimeter thick, three meters long and six to seven centimeters wide. The ends of the rods are smoothly bent upward and holes are made for the rod, which will fasten the runners together. The rod itself should be ten millimeters in diameter, with threads on both ends.
After this, the back and seat are mounted. They are made from hard wood such as oak or birch. You will need wooden blocks measuring 4 by 4 centimeters: two horizontal, vertical, transverse and one as a steering wheel. The sides of the seat are covered with boards. All wooden parts of the sled are fastened together with screws or bolts. The runners are connected to the main structure by welding. You can also weld a hook on the back of the backrest to secure a bag or backpack.
The distance between the runners should be at least 40 centimeters, but to increase their stability this value can be increased by another 10 centimeters.
If desired, you can make a kind of snowmobile out of such a sled by installing a chainsaw motor on it. However, this will increase the weight of the sled, and it will be problematic to move it from place to place. In addition, some fishermen equip a tent to provide shelter from the wind..
Modernization of fishing drags
For winter fishing, it is recommended to take two tackles due to the fact that one can always fail, and then the fishing may simply end. In addition, the presence of two fishing rods may also be due to the fact that two different baits can be attached to them. To ensure that fishing rods are not damaged in any way during transportation in a sleigh, you can make special holders from polypropylene pipes, which are purchased at a hardware store.
Installing rod holders
The diameter of the pipes should be slightly larger diameter fishing rod handles. It is best to attach them to the back of the sled using special fasteners, which can also be purchased at a hardware store. The height of the tubes should be equal to the height of the sled at the back.
The gear secured in this way in the sled will not break during transportation when you put it along with other things. They will not catch hooks on the backpack, and will not break the fragile parts of the fishing rod. When the tackle is in a vertical position, there is no risk of it getting snagged.
Securing the drill to the skid
A similar device can be made to transport an ice drill. An ice auger sitting in the mounts will not roll on the sled, fall, and the risk of it getting lost will be reduced.
The distance from the ice screw to the fishing rods must be made taking into account the fact that a fishing box, backpack or any other things will be placed in the space between them. The rest of the space in the sled will be used to accommodate the catch.
Usually on classic fishing sleigh There are holes in the bow for rope. However, it is better to drill holes around the perimeter and then thread the rope through them. During the movement of the sled, not only the bow of the sled will be involved, but also the entire body, which will allow for better control of it.
Of course, you can buy a plastic fishing sled and be content with the design option provided by the manufacturer, but, as a rule, during their operation the fisherman will encounter some problems. These may include the box falling out onto the snow while moving, as well as the inability to securely secure the fishing rods and drill.
In view of this, you should initially choose deep drag sleds so that the box does not tip over backwards. By providing this parameter, you can avoid additional time spent on modernizing the skids.
Attention, TODAY only!
Do-it-yourself homemade fishing box-sleigh A fishing box is both a fisherman’s seat and a storage area for the catch, fishing accessories, tackle, bait, bait and food. this moment There is a trend among anglers moving away from the traditional rectangular box with a single shoulder strap. Some fishermen simplify the task and are content with only a backpack and a chair, or a canoe or a bucket for a seat and catch... The lid of the bucket, on which the fisherman actually sits, is usually covered with foam plastic, porous rubber or felt for greater insulation. From various types fishing boxes metal boxes are still in demand industrial production with a soft seat and removable ski runners. As a rule, they are used by urban fishermen when moving from transport to the fishing site. Of course, such boxes are quite convenient, they are voluminous, strong, reliable and durable, but they have two significant shortcomings: first - on open ice the metal box rattles a lot, creates a noise that frightens the cautious fish, the second is the price of such a box.
Still, the vast majority of craftsman fishermen make original boxes from plywood, wood, foam plastic or metal with their own hands. As an example, we present to you original design- these are the so-called backpack-sleighs (Fig. 1). This model is indispensable both in transport and when traveling on foot on the back of an angler, and, most importantly, when moving on snow and ice. Big square the support prevents it from falling into the loose snow. It is flat, and its side walls are spread out, as is the case with a village sleigh, which, together with the guide runners, allows for very good stability when moving over snowy rough terrain. The side walls are made in the shape of a person’s back and rise to the level of the head. Most of the load can be placed above the shoulders, which when walking makes it possible to take the bulk of the load vertically on the spine and, thus, relieve the muscles of the back and lower back. The “backpack-sleigh” is best made from duralumin. It has 3 compartments. The two lower ones, with a volume of 14 liters, are intended for equipment and food. The upper one, with a volume of up to 25 liters, is intended for fish. The top is made of tent fabric. A valve closes it on top using two rubber bands with hooks, protecting the first compartment from snow. In order to make such a backpack-sleigh at home, you will need a set of ordinary metalworking tools, several pieces of duralumin, tent fabric and rivet corners. Side walls, top part, the hinged cover of the backpack-sleigh and the partitions are made of solid duralumin 1 mm thick; The bottom is composite, its inner part is made of soft aluminum, the sliding surface is made of hard aluminum with a thickness of 0.5 mm. This part of the bottom is riveted together with the guide rails, and when worn, it is quite easy to replace. By the way, it must be said that the bottom does not have to be made composite, but with sufficiently active use of the backpack-sleigh, you may have to change the sliding part of the composite bottom more than once. The guide runners are made of duralumin with a cross-section of 5 by 8 mm. They are riveted along the entire bottom of the sled, 40 mm from the side edge. It is best to make the side walls according to the shape of the curve of your back; in this case, the sled will lie more comfortably while being carried. To do this, you will first need to cut out the silhouette of the curve of the back from a piece of thick cardboard on one side, and the shape of the sliding surface on the other. After that, using this template, cut out the side walls of the sleigh from metal without allowance. In the workpiece of the inner part of the bottom, first of all, it is necessary to bend the sides to a height of 20 mm, and then rivet the side and back wall. The camber of the side walls relative to the vertical is 20 degrees and is set by the inner and rear walls. Next, you need to rivet the guide runners together with the sliding surface sheet. Now the composite bottom is ready. Thus, the hinged lid covers the inside of the sled and is held in place by a locking lug located on the inside wall. Constipation works due to the bending deformation of this very wall. In order to open the lid, it will be enough to press the inner wall forward - and the spring will throw back the lid. At the bottom of the sled, two U-shaped loops are riveted; a wide support belt is inserted into them and tightened using lacing. Firstly, this belt softens the fit of the sled to the back, and secondly, due to air gap Provides back ventilation when you walk. The canvas top must be sewn along the entire perimeter of the front compartment through holes drilled in advance in the side walls. It features a cinched neck, flap and a large zippered pocket. The shoulder straps are placed on a specially provided axis, and limiting brackets fix their position on this axis. Inserts (with M-5 thread) are pressed into both ends of the axle, through which the axle is screwed directly to the side walls of the sled. For manual carrying, a handle is attached in the same way to the front of the sled.
Exists a large number of various designs and modifications of winter sleds for fishing. The most popular designs today are those on metal runners.
They can be either solid or folding. For a very long time, fishermen gave their preference to this type of transportation in winter.
But if you put both gear and equipment on the sled at the same time in snowy areas, movement will be difficult. Whereas on ice and rolled crust, they perform well.
That is why plastic structures, characterized by convenience and practicality, have become an alternative. They have wide skis, which prevents the structure from collapsing during movement. Although there is a small minus. This device is characterized by low sides, which makes it necessary to additionally secure gear and equipment. But even with this inconvenience, their popularity does not decrease.
Create with your own hands winter sled Any person can do it. You just need to first select the desired homemade option.
If you are interested in a high-quality transport mechanism for delivering fishing gear in the winter, you can make a wooden, plastic, aluminum or metal sled. It all depends on the materials you have.
This kind of metal sled can be either non-collapsible or foldable. Literally a couple of decades ago, only such units existed. This mechanism has a large load capacity, its design is very rigid and powerful.
In this case fishing gear can be laid out on the loading platform from wooden planks, sheets of plastic or chipboard.
Negative side The use of this kind of winter sled for fishing is considered to be poor movement in snowy areas. The skis are designed to be quite narrow, and with a large thickness of snow this causes inconvenience. Whereas the surface of a reservoir with a low layer of snow or just ice is ideal for moving this unit.
Plastic sled
Plastic sleds, made in the shape of a trough, performed well during fishing. They have frost-resistant characteristics, transport fishing gear through the snow without any interference, and do not cost that much. Everything depends, naturally, on their size and the quality of the base material used.
Although most fishermen advise making their own plastic structures for winter fishing. They claim that it is not difficult.
Wooden sled
Wooden sleds will good choice for your trip. They will be able to deliver all the gear to the right place without any difficulty and will serve you faithfully for many fishing trips.
Necessary materials and tools:
- boards, preferably pine;
- wood glue;
- sandpaper;
- jigsaw;
- drill and more.
Step-by-step instructions for making them:
- Take two boards that will later act as runners. Using a compass, draw semicircles on them and cut them out with a jigsaw.
- To secure the cross bars, holes are drilled on the runners. It is recommended to connect them using round tenons using the gluing method.
- To strengthen the resulting structure, transverse strips on spikes are placed in front and behind the runners.
- To make the structure aesthetically attractive, it is necessary to trim off the excess after everything has dried.
- Grooves are cut out on the board, which will later act as a seat, and at the site where the tackle box is mounted, for their further connection to the runners.
- Bars are also glued to the back of the skis for reinforcement.
- At the bottom of the rounding point of the runners, a strip of aluminum or steel is screwed with screws.
- Before you start there final assembly it is best to examine its individual parts for accuracy of connection. Plus, all spare parts are sanded and coated with waterproof varnish.
After all the work is completed, be sure to put all your fishing gear in the sled and check the homemade product for strength. After all, I didn’t want the sled to break while fishing.
Large Sport 1630
- they are durable, but at the same time not heavy (10.4 kg);
- very large (165×81×43) cm and roomy;
- frost-resistant;
- have high sides;
- good for transportation on slippery winter surfaces.
Most fishermen are convinced that a snowmobile sled is a useful thing. But first, everyone should decide which type of transport they like. After all, these can be both drags and conventional designs with runners.
Most interesting options were discussed earlier. Moreover, you can make a sled for a snowmobile yourself, and indeed, like the snowmobile itself, you can make it with your own hands. After all, this is a fairly simple design.
Tips for improving purchased sleds for ice fishing:
- so that the inner surface of the sled does not have ice, it is necessary to lubricate the bottom with silicone lubricant or special wax for skis;
- if the trajectory will take place in the dark, it is recommended to attach reflective strips to the edges of the sled;
- In addition to the sled, add a folding chair. It can be secured with a rubber band.