Homemade lamps and sconces from plastic pipes. DIY lamp made from PVC pipes. Made of glass and wood

We often come across articles that describe how you can create unusual, but at the same time useful things for your home or apartment from unnecessary materials, which, for example, were left over after renovation. You can also make crafts from plastic bottles, disposable tableware, traffic jams and the like. But in this article we will talk about such a material as PVC pipes, which, according to the rules, are needed and used in the sewerage system, but now we will describe how to make useful thing, such as a lamp made from PVC pipes.

From a completely simple and inexpensive material you can create something fabulous and fantastic, the most important thing here is to have skillful hands and a rich imagination, the rest is up to you. Thanks to these good qualities you can create beautiful and beautiful night lights in the form of lamps.

In fact, we don’t know who first came up with this idea and created such beauty as a lamp from PVC pipes, but in our time people of such nationalities as Brazilians, Argentines, Australians and Chinese are engaged in such handicrafts, but ours is no exception country Russia.

To implement beautiful crafts We will list the materials and tools that we will need during the work:

1. A drill with a sufficient and varied set of attachments that have different thickness and they can also be distinguished by the types of grinding, we will need abrasive ground tips.

2. PVC pipe. When choosing, you need to take into account the size, that is, the diameter, it should be in the range from 25 to 55 centimeters. At the same time, provide a place in which your night light will stand or hang and the dimensions of the pattern that you will cut out on the pipeline.

Wireless lamp made of PVC pipe

If you don’t want to spend a lot of time and effort making a lamp from pipes, then the work can be done with just one drill. But if you want to make a design that is voluminous and complex in its composition, then for this you need to include in the work the making of small to large holes, complex rhinestones, working with the thickness of the pipe walls, removing the outer layers to give volume and aesthetics and, of course, giving the effect 3D some details.

Before we start making patterns and rhinestones on the lighting device, let’s decide what size lamp we need. The main criteria for pipe size are its diameter and height. If you have decided on the size of the craft, then let’s move on to choosing templates and stencils for the desired design that you want to depict on your device. Can serve as patterns floral look drawing, landscape or banal ornament and the like, the choice is up to your taste.

The silhouette of the selected design is transferred to the pipe in a very simple, but at the same time convenient method, at the same time paying attention to the edges at the top and bottom. Before you start please note right size diameter of the holes in the pipe so that the drills fit your ideas. A very simple option might be a good idea, for example, you don’t need to draw and cut out various designs, you can simply use drawn holes various diameters cut beautiful decorative lamp.

A very elegant drawing is obtained when light halftones are used in the work. This effect and quality can be achieved when the outer layer of the pipe, that is, PVC, is removed using abrasive tips. The more layers you remove, the more transparent the effect will be and the light will be much brighter in these places than on a simple surface.

To give a lamp made of PVC pipes a 3D format effect, you need to attach parts that will protrude beyond the walls of the pipe, you first need to thin them using the same tips that were used when giving the light halftone, after doing this work we cut out the shape using special construction knife.

To add aesthetics and the final effect, we take construction hair dryer(it imparts more intense heating), heat the mold until elastic and bend it to the side. We leave the mold alone and wait for it to cool; when it cools, it will remain in the same state in which you bent it during heating.

Such a lamp does not even need to be painted upon completion of the work; the natural color of the pipes (white) will fit into the design of your house or apartment quite seamlessly. But still, if you want to give the lamp a colored design, it will not take much time and much effort, you just need paint from aerosol can.

Upon completion of work from the sphere of decoration, it is worth moving on to work that will answer all practical questions. So, to complete the craft, you need a very strong and stable shelf or base, at your discretion, because a lamp made of PVC pipes must stand steadily, since it weighs a lot and is also quite large in size.

The quality of light in your device may be different kinds lighting using lamps. It is recommended to use energy-saving lamps, because they will not allow the walls of the lamp made of PVC pipes to overheat and thereby deform the decorative shell. To make the lamp more decorative, you can use a garland during lighting, it will turn out very interesting.

One of the tools that helps create a comfortable environment in the home is a beautiful lamp. Available in stores a large number of various models. The better and more beautiful the device, the more expensive it is. Therefore, many craftsmen decide to make lamps from pipes with their own hands. There is nothing complicated in such a process: having in stock simple details, you can make a unique design. Plumbers can make such devices with particular ease.

In this article:

Assembling a chandelier from pipes

Conventional chandeliers are chosen as the main source of light in living rooms, kitchens and bedrooms. A device made from scrap materials will help you diversify the design of your room and stand out from your friends and acquaintances.

To assemble a lamp from polypropylene pipes and fittings, you will need the following components:

a lampshade with a grille from an industrial lamp;
two pieces of plastic pipes;
the wire;
plumbing tee and angle;
two flanges, the same size as the cartridge;
wooden block or other base;
spray paint;
paper;
screwdriver and screws.

First, disassemble the lampshade by removing the grille and socket; if a lamp with a grille looks good in your interior, then leave it. On outside cartridge, screw the metal flange. Be careful not to damage the wires.

Screw the plastic pipe to the metal flange, then attach an angle in series, then another piece of pipe, a tee, and finally end with a flange again. With each new part, do not forget to stretch the wire.

Make several of these structures, and after everything is ready, they can be screwed to a wooden base. Don't forget to bring out and connect the cables to central system. Ready product can be painted in any color so that it matches the interior of the room. Don't forget to lay down paper before doing this so as not to stain the floor. Screw in the lamp and, by flicking the switch, check the functionality of the PVC pipe lamp.

By excluding the corners from the design and lengthening the plastic pipe, you can make a floor lamp. The main thing is to prepare a stable foundation.

Wall lamp made of flexible metal-plastic

You can assemble it yourself Wall lights from water pipes with turning lamps. To change the angle of incidence of light, it will be enough to turn the lighting fixture in the desired direction. During work you will need:

flexible plastic pipes 20-50 cm long;
solid birch, pine or thick plywood for the base;
electrical wire;
socket and lamps;
jigsaw;
screwdriver and screws;
spray paint and paper;
sealant.

We make holes in the base that match the diameter of the pipe. From a small block, cut out a place for attaching the cartridge; do not forget that the metal-plastic body will be supplied from the reverse side. Pull the wire through the flexible base and the wood or plywood.

Let's insert metal-plastic pipe into the base and secure it with screws or glue. We fix the cartridge in the prepared block, and isolate the contour with sealant. We paint the finished structure made of plastic pipes in a pre-selected color and after drying we hang it on the wall.

You can make or buy a beautiful floor lamp to go with the socket - then the pipe lamp will look more attractive.

Coupling table lamp

Let's go back to the loft style, only now we'll do it table lamp with one light source. It is suitable for a study at home or office. Depending on the chosen light source, such a product will help you either concentrate or relax.

Required tools and materials:

long and short nipple;
fitting (six metal corners and three tees);
six small nipples that will connect the corners;
drill with metal drill bit;
wire with plug and switch;
glue;
insulating tape.

Prepare metal parts, having previously cleaned them of grease stains with white spirit. Since the reins will need to be pulled through narrow holes, cut out the switch. Screw the lamp into the socket and insert it into the first square, first pulling the wire through the part. Secure the lighting fixture in the designed position with glue.

Make a hole in one of the tees for the cable outlet. In order not to make a mistake with the drilling location, imagine how the lamp will stand.

We screw small nipples to the central tee with a hole. We connect tees with nipples and corners on the sides to them. This will be the base of the product. We screw the corner in which the lamp socket is located to the long nipple, followed by the corner and the short nipple. We connect the two parts of the lamp together. Don't forget to run the wire in advance. Reinsert the switch and check the operation of the desk lamp.

Such lighting from parts of the pipeline will show your guests and family your resourcefulness. When you see the finished result, you will experience great joy and pride. DIY lamps will last a long time and will never go out of style.

I make very beautiful pipe lamps

Do-it-yourself volumetric lamps amaze our imagination with the magical play of light and shadow. But no less surprising is that these strikingly beautiful lamps are made from an unexpected, simple and very affordable material.

The use of PVC pipe as the basis for a lamp provides wide and unusual manufacturing possibilities. You can cut through a pipe, you can make penumbra by simply removing the thickness of the pipe, you can make volumetric compositions by carefully bending parts of the pipe.

As the author of these lamps, Ademar Rocha, says, to make a lamp you need hand drill with a set of different attachments, and a construction hair dryer, which allows you to give the cut parts of the pipe the desired curved shape.

Drill attachments allow you to process the edges of the volumetric parts of the lamp, make texture and surface cuts on the pipe, which will create the necessary halftones in the intended light composition. All this will give the lamp a neat, finished look.

Of course, our lamp needs a fairly heavy stand, which will give stability to the vertical structure.
For fire safety, it is better to use an energy-saving light bulb that heats up minimally.

LEDs can also be used as a lamp in such a lamp. These are not only safer, but also give you more options for color lighting.
Because LEDs allow you to change the color of the illumination, then your lamp can delight you with green, red and golden colors. In addition, LEDs practically do not heat up.

Such a lamp, carefully made with your own hands from an ordinary pipe, will be an unexpected gift for Valentine's Day. And such a musical lamp will be appreciated by a music fan. A similar lamp can be made from the linings of two pipes of different diameters.

The surface of the lamp can be painted, and then when turned off it will fit better into the interior of your room.
For the lamp you can use pipes of various diameters. For example, this lampshade for a chandelier is made using the dot cut method from a wide PVC pipe.

Not only volumetric lamps are beautiful; by drawing the desired pattern on the pipe and making dots on the pipe along its contour, you will get a simple-to-make, but wonderfully beautiful lamp. Use not only through holes, but also translucent holes, this will make your lamp more interesting.

Designer lighting fixtures are sold at incredible prices. In fact, making a lamp from pipes yourself is not a problem at all. This does not require the purchase of expensive materials or in-depth knowledge of electrical engineering. Let's consider several options for homemade lighting elements from scraps of various pipes.

Desk lamp

An original lamp made of pipes will add some zest. The structure can be assembled from scraps available on the farm or purchased material at a hardware store. After purchasing all the materials, it will take no more than an hour to assemble the lamp.

Among the required components:

Long and short nipple.
Six pipe squares.
There are the same number of small nipples that serve as corner clamps.
Three purposes.
Drill.
Wire with switch and plug.
Insulating tape.
Hot glue.

First, all pipes are treated with solvent, and the stickers are removed. The light element is inserted into the socket, after which the wire is pulled through the square. The light bulb socket is fixed with glue. The structure is processed carefully so as not to affect the threads, after which it is left until the adhesive composition dries.

Main stages of work

Subsequent assembly of the lamp from pipes is carried out in the following sequence:

Prepare a hole in the tee for the wire on the reverse side using an electric drill.
Pipes are assembled along threads using nipples.
4 corners are taken as the base, three tees are twisted together, the standard hole is directed upward, and the homemade socket is directed to the lower invisible part.
Two nipples connected to each other will serve as a holder.
The cable is pulled through pipes without a switch.
The switch is assembled and connected.
The functionality of the assembly made from pipes is checked.

This design is easy to fix if you are not satisfied with the resulting design. The result is an excellent and inexpensive night light or work desk lamp.

Wall option

The pipe lamp, the photo of which is shown above, is made as follows:

The grille is removed from the old street-type lamp. If it fits into the interior, this is not necessary.
A pipeline flange is attached to the cartridge, which will serve as a base fixed to the wall.
Then it is connected to a tee, nipple and angle. Another flange is attached, then the wiring is pulled through the pipes.
The height of the lamp placement is adjustable.
The lamp is connected to the socket and the switch is mounted.
The flange is attached to the wall using screws, and the operation of the device is checked.

The operation will require the following materials:

Lamp with or without grille.
A pair of black nipples for plumbing purposes.
Cable.
Two metal flanges, the diameter of which matches the size of the cartridge.
Screwdriver and fixing screws.

Loft lamps made of pipes with a concrete base

The lampshade is made from several wooden hoops for embroidery and watercolor paper. The whole process is divided into mold preparation, manufacturing concrete base, connecting wiring, assembling and fixing pipes, as well as arranging a lampshade. The container for pouring can be made of plastic; its dimensions must be sufficient to support the weight of the entire structure.

Initial stages:

Using a knife, make a hole for the cable.
The reinforcement wire is placed in a container.
The cord is threaded through the pipes with the necessary margin.
Marking tape is used to mark the exit of wires from the solution.

The cord must fit into cement mixture at the point of connection to the switch, then supplied through middle part pipe flange in which a hole is provided.

Final part

Further production of a lamp from water pipes is divided into several stages:

Done cement mortar, which is poured into the prepared form.
The switch is fixed flush with the surface. Be careful not to let it drown in the mixture.
Mount the flange on top of the solution, thread four mounting screws through the holes.
After preparing the base, the wires are threaded through the pipes, attaching them to the flange.
Next, the free edge of the cables is pulled to the cartridge, after which the latter is attached inside the pipe.
The light bulb is screwed in, the switch is connected and turned over.
A lamp with a low power rating can be left open.
For a powerful light element you will need to build a lampshade. To do this, take two hoops and watercolor paper, and treat the seam with wood glue.
This design allows you to choose any color and fabric covering used.
The finished lampshade is attached using small screws that are screwed into the inside of the hoop from above, or thin wire, mounted on an additional pipe flange.

LED lamp

PVC pipe is optimal for this device. It is worth noting that this option is equipped with autonomous power supply. The design of the lamp is as simple as possible; anyone can assemble it with a minimum of tools and materials. Several pieces of pipe will be required bigger size for the base, including angles and fittings, as well as a smaller diameter PVC pipe for the stand. The system uses a resistor with a power of at least 1 watt. This indicator is designed for 6 LEDs.

The circuit is connected in the standard way. It is recommended to use type. This will allow you to quickly make a nest for it in the pipe and will not require cutting additional elements in the form of a rectangle under the slide switch. In addition, the switch should not be instantaneous, otherwise you will have to constantly hold the button to operate the device. The lamp made of PVC pipes is equipped with a lampshade. Its painting is carried out in several layers. Otherwise, when the diodes are turned on, streaks or uneven processing will be visible. A battery of suitable capacity is mounted at a distance of 80 millimeters from the edge of the pipe at the base. You can also install a switch there. The main thing is that these details do not interfere with each other.

Loft chandelier made of pipes

Modern trends in lighting organization often require taking into account not only the efficiency of lamp elements, but also the chandeliers themselves. You can create them yourself from scrap materials, while getting an original and inexpensive design. For example, it is possible to do ceiling lamp from plastic pipes. To do this you will need the following components:

Ceiling type socket.
12 branches for sockets and light bulbs.
Polymer water pipes.
12 small lamps.
A can of special paint.
Paper.
Ceiling rosette.

The work begins with developing a model of the chandelier and connecting the branches to each other. You can create both a symmetrical design and an original author’s model (it all depends on your imagination). Next, lay out the paper on which the painting process will take place. Paint on all sides and leave the lamp to dry. The ceiling rosette is painted with visible side. If necessary, the chandelier can be sprayed again. Then all that remains is to connect the structure to the ceiling using screws and a flange, and also screw in the lamps. Check the design and enjoy a unique product. By the way, if you get tired of the configuration of the lamp, it can be transformed into a different style in a few minutes.

Adjustable Table Lamp: Initial Manufacturing Process

This DIY pipe lamp is distinguished by the fact that it can be adjusted in reach and height. Many replacement parts are available to find at home, so it is also economical and also custom.

Materials used:

Bicycle star.
Pair metal pipes with half-inch thread (length - 450 mm).
Flange.
Fitting.
Two elbows at 45 and 90 degrees.
Two ¾ copper tubes.
Socket.
Polymer bushing.
Electrical cable.

The bicycle sprocket will serve as the base. Holes for the flange are drilled in its center, after which it is painted. Then it is screwed into the flange iron pipe. The upper part of the element is attached to the base of the lamp, and the second part with large diameter installed in such a way that a sliding effect appears. This will allow you to recline top part structures by moving the top tube.

Final part

To fix the pipe, a hole is drilled in the lower compartment for the fixing screw. A pipe with a diameter of ¾ is soldered, which will allow for alignment and also obtain original look. As a stopper, you can use a ¼ bolt, which is attached to the outer handle of the faucet. The lampshade can be made using one of the methods described above, attaching it with screws and painting it with copper or gold paint.

The rubber bushing is mounted in the opposite end of the fitting, after which the end of the wire is cut off and pulled inside the pipe to the cartridge. The lamp is screwed into the socket, around which the casing is clamped. A similar lamp made from water pipes will make it possible to provide the required amount of light under different conditions. At the same time, its cost is minimal.

If you are thinking about radically changing the look of your room or want to add home interior loft chandelier, then try making a loft-style chandelier from pipes with your own hands! Master classes with photos will help you with this.

By the way, the loft settled into interiors relatively recently - about 60 years ago, and to this day it is interesting for its variety of design concepts. It is appropriate both in large studios, where the living room is combined with a dining room, and in small rooms. DIY loft-style lamps are a compromise between fashion and style, extravagance and everyday life.

Familiar objects appear before us in a new light - this is a DIY loft lamp. Features include long chains for hanging from the ceiling, custom lampshades or compositions of many simple lamps and uses.

Making a loft-style lamp from pipes is quite simple, read master class 4 - see for yourself!

Materials and tools

5 large pear-shaped light bulbs;
10 brass (copper) tubes - 5 short and 5 long;
fitting according to the diameter of the tubes;
1 longest brass tube – suspension axis (to the ceiling);
5 adjustable brass hinges;
5 ceramic light bulb sockets;
two-core connecting wire (so that it passes freely into the copper tubes);
electrical cable;
insulating tape;
screwdriver.

Chandelier manufacturing technology

Step 1

Let's do the wiring. To do this, unscrew the cartridge covers and connect the wires to each of them, as shown in the photo.
We thread wires through tubes, then using hinges we connect the short tubes to the long ones.
Cut off the wire leaving a few centimeters for twisting with the main cable that will be connected to the electrical network on the ceiling.
Screw the edge of the tube into the cartridge.

Step 2.

Screwing in the “legs” future chandelier into the fitting and do the wiring again: we twist the white wires with the white core, and the black wires with the black wire, as shown in the photo. We wrap live parts with electrical tape.
Carefully fill cable inside the main brass tube, on which the chandelier will be held. We fix it on the ceiling. After everything, we screw in the light bulbs.

The result is an urban chandelier that combines the simplicity and elegance of an industrial or elevator style with the light of large lamps.

Master class No. 2: Loft chandelier made of pipes

Following modern trends lighting, you need to take into account the efficiency not only energy saving lamps, but also the chandeliers themselves. For example, from scrap materials - try to make a simple, bright, ergonomic lamp in the loft style made of polymer water pipes, after reading the following master class.

Materials and tools

Ceiling rose;
12 splitters (lamp sockets);
polymer pipes
12 small light bulbs;
a can of gold paint (or any other);
paper or newspapers.

Build process

Step 1.

First, let's develop a model of the chandelier and connect all the splitters to each other.
Only your imagination works here, but you can make a symmetrical chandelier, creating tree structure, i.e. screw in the same number of cartridges (branches) on each side.

Step 2.

Spread paper or newspapers to paint the future chandelier.
We paint with a spray can on all sides. Leave to dry.

If necessary, after drying you can paint over it with a second layer. We paint the ceiling rosette from the front side.

Step 3.

After everything has dried, you can attach the chandelier to the ceiling. If her appearance suits you, then screw in the light bulbs and enjoy your creation!

Over time, you may want to change it - then you can make a different combination of branches and the chandelier will shine in a new way!

Master class No. 3: Loft table lamp made of pipes

Reliable, easy-to-manufacture table arm in industrial style Suitable for working in the office or at home. It practically “sheds” cold or warm white light through the pipeline, in which it is pleasant to work or engage in your hobby.

Tools and materials

One long nipple;
one short nipple;
6 pipe squares;
6 short nipples for connecting elbows;
3 plumbing tees;
electric drill;
cord with socket and switch;
glue gun (hot glue);
insulating tape.

Manufacturing instructions

Step 1.

First you need to clean all the pipes with white spirit or a special cleaner, if there are stickers, you need to remove them.
During work, the cord with the switch will have to be drag through pipes, so for now we’ll cut out the switch - it will be put in place later.

Step 2.

We insert the lamp into the socket and pull the cord through the square.
To keep the lamp socket in place, secure it with a glue gun, filling the cavity in the square, as shown in the photo.
You need to pour it carefully, not reaching the thread.
Let the glue dry.

Step 4.

Let's prepare a hole for the cord on the other side. To do this, use an electric drill to drill a hole in one of the tees.

First, imagine how the lamp will stand on the table, only then mark the drilling point and drill the part.

Step 5.

We assemble threaded pipes using nipples, as shown in the photo.
It should look like this: 4 corners, like the base of a table lamp, 3 tees are twisted together, the factory hole is directed upward, and the one made, on the contrary, is downward, on the invisible side.
Two nipples are connected to each other - this is the lamp holder. As assembly progresses, we pull the cable through the tubes.

Step 6.

We disassemble the switch that was cut out. We take out the old wires and use electrical tape to make a new twist, connecting the ends of the wires to the corresponding channels in the switch. Reassembling the switch.

Step 7

Check how the switch works and whether you are satisfied with the appearance and stability of the lamp. If something is wrong, in such a practical design it can be easily corrected by turning the parts.

A stable, comfortable and completely unexpected DIY designer lamp can safely be called an indispensable companion for your evenings!

You can also make a very stylish table lamp from copper pipes or empty bottles, a master class of these 2 lamps is in the material

Master class No. 4. Industrial style lamp

If you like products with industrial design, if you want to install industrial lamps in your home or garage, watch the following master class and, most likely, you will see what you have been looking for for a long time. Ease of manufacture and urban design.

Tools

Lamp with grille;
2 black plumbing nipples;
conductive cable;
plumbing elbow and tee;
2 metal flanges along the diameter of the cartridge;
screws and a screwdriver.

Installation instructions

Step 1.

Remove the grille from the lamp. If it suits your interior, you can leave it. Removing the cartridge.
To the cartridge attach a metal flange as shown in the photo.

Step 2.

We connect the parts of the chandelier sequentially: a flange, a tee to it, then a nipple, an angle, a nipple again, connected to the second flange, all the while pulling the wire through the tubes.

Step 4.

Check the length of the cord from the outlet to the height at which the chandelier will be installed. Until you are satisfied with the height of the switch, do not attach the lamp to the socket.

Vary the length of the cable until you find the optimal length. After this you can do the twisting.

Step 5.

We fix the flange to the wall using screws and a screwdriver, because... The design is not very heavy. It turns out that the wire hangs just from the tee hole.

Plug in and enjoy a small design element in style big city!

Chandeliers in the loft style focus attention with technical solutions, clarity of forms, without excessive solemnity or pomp. This is the style of a big city, spacious household premises, where there is no luxury, but there should be a lot of light and work, creativity.

What else can loft lamps be made from?

Do-it-yourself loft-style chandeliers made from pipes deny pomp and chic, but they fit well into home and other interiors thanks to the continuity of modern trends and, of course, the contribution of everyone who makes it.

Made of wood

Also, a very simple lamp in the loft style, as in the photo above, can be made from wood - a master class in the article.

Made of plastic

The theme of recycling is very relevant in the loft style. Various cans and bottles are suitable for this. We also have ready-made ideas and master classes.

Made of glass and wood

Glass and wood are favorite and frequently used materials in the loft. Therefore, a lamp created from them will always look harmonious and stylish. Make such a cult thing as in the photo above - (No ratings yet)