Homemade mechanisms for the home. Interesting and useful homemade crafts for the home. And the old refrigerator is in use

Homemade products for the home are not very popular among city residents.

After all, today the market of all kinds of goods is represented by a wide range of products, among which it is easy to choose something suitable for yourself.

However, in order not to spend extra amounts of money on trifles, as well as to improve your own craftsmanship skills, you can create all these items with your own hands.

Among the useful homemade products you can find are:

• design elements that will fit into your interior in the best way, because you will create them based on your own wishes;
• household items you no longer have to buy at the store;
• homemade crafts for the home will become decorations for appearance apartments or .

Homemade crafts

DIY crafts can be very different. From beauty to practicality there can be one step in their development, and the proof of this is the interesting shelves made of tin cans from under the coffee. For this craft you will need:

• several tin cans (at least 6 pieces);
• glue;
• a drill or other tool that can be used to make holes in cans.

Let's start creating homemade shelf from making holes. On the back (bottom) of each jar you need to make a hole, which will serve as a fastener to the wall.

However, it is not at all necessary to make a hole in each jar, but if your shelf has big sizes, there must be at least 2 of them.

Instead of glue, you can use a drill and drill a hole in each can, which will be fastened together with nuts and screws, but with glue, of course, it’s easier to work with.

To prevent your homemade project from unexpectedly falling apart while still on the wall, you should use very strong glue, such as the one used in shoe repair. can consist not only of tin cans, but also of glass.

Glass jars can be a useful homemade product for storing small items.

Useful homemade crafts for the home - a house for a cat

If you have a pet in your house, and somewhere in the pantry or on a mountain there is an old monitor collecting dust that has not worked for a long time or will never be used, you can quickly turn it into a house for a cat.

To do this, simply unscrew the screws of the device, remove the case and separate it from the inside, including the screen. Next, we connect the body parts with the same screws, thoroughly wipe the monitor from dust and begin decorating.

As a decoration for a cat's house you can take regular paint, which covers the entire surface of the house you created. But there is another way: take watercolors and decorate the former monitor with patterns of your choice.

Hanger - homemade do it yourself from buttons

For button hangers we need:

• homemade buttons;
• spray paint;
• Super glue;
• hanger.

You can cover the hanger with fabric and sew buttons on the fabric, it also looks quite beautiful.

Thread hangers

This is the hanger itself. You need thick threads with which you will wrap the hanger and get a wonderful homemade product made with your own hands.

To secure the threads, first apply PVA glue to the hanger.

All homemade products for the home are very useful, as they give new life old things and bring beauty and creativity into your home.

In any private household plot or peasant farm you can find different kinds techniques that are used to make work easier and increase productivity. Mini equipment for a personal farmstead is used for cultivating land, caring for livestock and poultry. It is used to transport crops and fertilizers.

Not every farmer has enough financial resources for the purchase of equipment with high power. In a personal farmstead you have to make do with little effort. Properly selected mini equipment is capable of performing a wide range of agricultural work. She may be:

• portable;
• pedestrian;
• sledding;
• stationary.

Portable equipment includes power tools that are held by hand, hung on the shoulders, or mounted on road wheels. The power of such devices does not exceed 3 kW. This amounts to approximately 4 hp.

Pedestrian equipment – ​​walk-behind tractors, walk-behind cultivators, walk-behind mowers, walk-behind cultivators, etc. It is driven by hand pull. The power of this type of equipment can reach 10 kW or approximately 13 hp.

The power of the driving equipment reaches 18 kW or 22 hp. This group includes mini tractors of traction class 0.2 and walk-behind tractors with a trailed trolley.

Stationary equipment – ​​sprayers, pumping stations and so on. Device power up to 10 kW. This amounts to 13 hp.

Mini tractors

The basis of the line of mini-tractors on the Russian market is represented by equipment from Belarusian, Chinese, and South Korean manufacturers. A small part of it consists of European, American and Japanese brands. The latest types of equipment have not gained wide popularity among Russian farmers due to the complexity and high cost of maintenance.

Domestic manufacturers are represented on the mini tractor market with equipment that consists of large-unit assembly products famous brands. Russian farmers buy most mini-tractors made in China. Behind last years Their build quality has improved significantly. A good technical base has been created for them in the country, on which repairs and maintenance are carried out.

Rules for choosing a mini tractor

When choosing any type of equipment, each buyer is guided by his financial capabilities. They determine the limit of possibility within which a suitable mini tractor is selected. There are a number of criteria that help you make the right choice. It is important to choose the best technology option for yourself and not overpay for it.

Before purchasing a mini tractor, determine the list of jobs for which it is planned to be used. This helps determine the required power of the equipment. With processing small plots budget mini-tractors with a power of 16-20 hp can handle the land. Other parameters to consider when purchasing include:

• type and consumption of fuel;
• type of drive;
• shaft speed.

Only all-wheel drive allows the mini-tractor to move freely across the fields. The heavier the equipment, the more stable it is. Required condition purchase is a test drive. The equipment should be easy to operate. All modern models mini tractors have steering control. People who can drive cars special labor master this technique.

Each mini tractor has special mounts for attachments. It is better to buy it complete with the main equipment. This will allow you to avoid future problems with docking different nodes. You need to buy mini-tractors from trusted manufacturers.

Which mini tractor is better to buy: characteristics, capabilities

When purchasing a mini tractor, it will never be superfluous to consult a specialist or reviews from other buyers.

Table. The best-selling mini tractors in Russia

Mini tractor model	Characteristics	Peculiarities
	Power diesel engine 22 hp Maximum speed 27.35 km/h. Fuel tank capacity 8 l. The transmission is rear-wheel drive. The turning radius of the front wheels is 3.9 m. The gearbox is 6 gears. The engine is started using an electric starter. Weight without attachments 960 kg.	The mini tractor is assembled in Russia from non-original parts. This does not reduce the reliability of its operation.
	Diesel engine power 24 hp. Weight without attachments 1040 kg. The transmission is rear-wheel drive. The gearbox has 8 steps. The engine is started using an electric starter	Mini tractor without a closed cabin. Complete Chinese assembly.
	Fuel tank capacity 6 l. Diesel engine power 22 hp. The transmission is rear-wheel drive. Gearbox – 6 steps.	The mini tractor is assembled in Russia under a Chinese license.

Motor cultivators and walk-behind tractors

Motor cultivators and walk-behind tractors have a lot in common. Their main difference is power. For walk-behind tractors it is much higher. The equipment can run on electricity and liquid fuel. Its main purpose is land cultivation. The favorites in sales in Russia are models German manufacturers. Following them in this segment of agricultural machinery are Japanese and American brands.

Unlike mini tractors, walk-behind tractors and walk-behind cultivators are relatively light in weight. When choosing equipment of this class, pay attention to the type of their engine. To process remote electrical source Equipment powered by gasoline or diesel fuel is suitable for powering land plots. You can cultivate the land near your house using a motorized cultivator and walk-behind tractors powered by electricity.

When purchasing walk-behind tractors, you need to pay attention to their power and weight. The equipment produced is divided into 3 classes, each of which is designed for specific operating conditions:

DIY agricultural machinery

In any farm there is always available material suitable for the manufacture of agricultural machinery. Engineering knowledge and design skills will always find application in subsidiary farming. For example, they will help you turn a walk-behind tractor into a mini tractor.

Step-by-step instructions for converting a walk-behind tractor into a mini tractor

The big disadvantage of walk-behind tractors is manual traction. It is compensated by prices that are lower than the cost of mini tractors. Skilled hands can turn a walk-behind tractor into a mini tractor in a short time at minimal cost. The process of remaking a walk-behind tractor begins with drawing up calculations and design drawings. In the absence of design experience, it is better to use other people's developments.

Step 1. From metal sheets, profiled pipes and angles, the frame and body for the mini tractor are welded. Their mass must be calculated taking into account the engine power. If the design uses a walk-behind tractor with a powerful unit, then car trailers can be used in its design. Two-wheeled carts are best suited for adapting a walk-behind tractor to a mini tractor.

During the manufacture of the frame, it is necessary to provide fastenings for hanging equipment. Special holes are made along the contour of the frame for future installation of cabin and body elements.

Step 2. Components are selected for the prepared frame of the future mini tractor. Motorists can find many useful things in the garage for these purposes. From a VAZ passenger car you can take pedal control units and drum brakes for the drive wheels. For pennies, the necessary parts can be found at car wrecking yards.

Step 3. Installation of bridges
Knots are assembled from various elements. You can take them from old cars or agricultural equipment. Bridges are made independently from:

The rear axle can be used from an old UAZ. It will have to be shortened slightly. Short axle shafts are suitable for the shortened version of the rear axle.

Step 4. Installing wheels

When selecting wheels for a mini tractor, you need to take into account the fact that they have a direct impact on the handling of the vehicle. When turning, wheels that are too large force the driver to exert great effort to control the vehicle. Small wheels bury the tractor into the ground. Optimal size wheels for the front axle - 12-14 inches.

Tires on mini tractors must be installed with lugs. They significantly increase the maneuverability of equipment.

Step 5. Installation of the control system and driver's seat

Control systems begin to be built after installing the chassis. In the installation sequence, the steering wheel follows the installation of the driver's seat. The height of the steering wheel is adjusted using it. It should not hinder the driver when operating the equipment.

Step 6. Installing the engine and body

Installing the engine and debugging its operation are final stages mini tractor assembly. Installation of the engine begins after it is assembled chassis. The unit is installed on a special plate. It must have grooves for fastening. After installing the engine, installation is carried out electrical circuit and connecting the steering system and instrument panel.

At the final stage of converting a walk-behind tractor into a mini tractor, the cabin trim is done.

Video - Converting a walk-behind tractor into a mini tractor

What can you use to make an irrigation system for your garden?

Watering plants in the garden can be considered labor-intensive work. It takes a lot of time and physical effort. You can make the task of caring for your garden easier by making an irrigation system from scrap materials. The design of the system depends on the water source. It could be:

Water is taken from a well, natural reservoirs and containers using a pump. The best option pump for the garden - “Baby”. Him:

For drip irrigation hoses with holes are laid around the garden. The water from them should get under the root of the plant. When taking water for irrigation from the water supply, the hoses are connected to the tap. If a pump is used, the hoses are connected to its outlet nozzle.

Among the advantages of drip irrigation:

• saving water consumption;
• mechanization of manual labor.

More information about the manufacture of equipment for watering a garden can be read in.

What can an old washing machine be useful for in a farmstead?

There is never any need to rush to scrap an old washing machine. From it you can make various devices for subsidiary farming. For example, adapt it for washing vegetables. To do this, the machine is installed above the drainage system. It acts as a local sewerage system. Vegetables are loaded into the laundry hatch and placed. Water is supplied to the machine using a portable hose. Waste water flows out of the washing machine by gravity drainage system. This vegetable washing system works on the principle of a colander.

From an old washing machine you can make an original flowerbed, barbecue or smokehouse. The drum and electric motor are used to make a grass chopper, grain crusher and other devices.

Circular grinder

The easiest way to turn an angle grinder into a saw is to replace the standard blade with one designed for wood. Such a device has a limited range of action. It can cut slats or thin bars. A protective cover is put on the grinder. The handle is made a continuation of the body.

Cross cutting lumber requires a miter saw. You can make it from a grinder by attaching the tool to a rotating bar. A circular saw is used to cut large quantities of lumber. With its help you can cut a board or bar of any size. Manufacturing circular saw requires certain knowledge. The saw blade on a circular saw is mounted on a table mounted on a frame. For its manufacture, a 50*50 corner is used.

The sawing table is made of plywood or boards. The control button and switch are located on the side. You can figure out how to make a circular saw from an angle grinder with the help of a video.

Video - How to make a circular saw from an angle grinder

Homemade products for the garden

The fantasy of summer residents knows no bounds. From scrap materials they make a variety of devices that make their work easier in the field, garden or garden.

Long-term storage of root vegetables requires compliance with certain storage conditions. After digging, the potatoes are sorted, cleaned of dirt and dried from excess moisture. It is better to store tubers in boxes. It happens in such a container natural ventilation potatoes, which significantly reduces the percentage of their rotting.

To make a box, use 15*20 slats, 40*40 or 50*50 timber, and 8-10 mm thick plywood.

Grape press

You can make a press yourself from a barrel, a filtration mesh and a screw mechanism. You can replace the barrel with a mesh cylinder, or in the screw mechanism with a regular jack. When using a barrel, its sides are expanded due to the slots that are made between the side slats. The width of the slots is 2-3 mm. The barrel is installed on a frame made of metal profile. The grapes are placed in a barrel, which is closed with a lid having a diameter corresponding internal size containers.

Using a screw mechanism or a jack, pressure is applied to the cover. Under its influence, the grapes produce juice, which flows out of the barrel through the cracks. To collect it, a collection tray is installed under the bottom of the barrel.

Crafts made from old objects and things that can be given a second life can make your home much more comfortable. Some DIY homemade products for the household can significantly save the home budget, make work easier, or make the surrounding interior more interesting. And even if difficulties arise in the process, overcoming them will be worth it.

Homemade crafts for the home workshop

In almost any home there is always some set of tools necessary for farming. But sometimes situations arise when working in your own workshop or garage requires some kind of device that cannot be purchased in a store or is very expensive. In this case, you can find a way out by making it yourself.

Forge from a balloon

This device for heating metal will become an indispensable assistant in the home workshop. The forge can be safely used for making original items using artistic forging. These will be truly unique forged items.

For the forge, it is best to use an empty 25 liter gas cylinder. Its ends are cut off with a grinder, and the door of the forge and its back part will be made from the cut parts. The inside of the cylinder is covered with fire-resistant ceramic wool, which can withstand temperatures of more than 1200 0 C. On top it is coated with fireclay clay (lined), which can withstand temperatures up to 1500 0 C. After lining, fireclay slabs or fire-resistant bricks are laid on the bottom of the hearth.

A hole is drilled at the top and a small squeegee is inserted, allowing the nozzle of a gas-powered burner to be inserted, which can create a temperature in the forge of more than 1000 0 C - quite sufficient to heat the metal to a certain temperature suitable for forging.

Collapsible garage crane

When manufacturing such a lift, the cash costs will be much less than purchasing a factory model. To make it, you will only have to spend money on materials, half of which may be found in the garage.

Materials required to assemble the lift:

1. Two racks - profile pipe 100x100x2350.
2. Cross rod - steel pipe arbitrary length with a diameter of 100 mm.
3. Four supports for the rod - profile pipe 100x100x600.
4. The base and braces are a corner with 100 mm shelves.
5. Two metal rollers for the cable.
6. Four wheels for movement.

For the lifting mechanism, it is best to use a hand winch with worm gear with a maximum load of up to 500 kg, which is attached to one of the racks of the crane beam.

The design does not take up much space in the workshop, is easy to move on hard surfaces and is quite convenient for removing the engine from the car.

Mobile tool rack

The main highlight of this rack is its small size , but at the same time you can place it on it a large number of tools, and if necessary, quickly move it to any place or neighboring room. It is very convenient to use such a rack in your workshop or when carrying out construction and repair work in large rooms, especially when you need to frequently carry tools.

The rack can be assembled on the basis of a collapsible plastic rack installed on a homemade platform with wheels (trolley). The platform is made exactly to the dimensions of the rack from a metal corner with shelves 45x45 mm or a sheet of plywood with a thickness of at least 10 mm. Furniture metal wheels are used for movement.

Additionally, you can make and attach fasteners to the rack for building levels, extension cords and other tools that can be stored in a hanging position.

To help the hostess

It is not always possible to financially buy, for example, some new furniture in furniture showroom or place an order for its production. But you can always get out of this situation by making the right thing with your own hands, and at the same time making it attractive and unique, using improvised means for this.

Kitchen apron made of corks

The kitchen apron is the surface of the wall located between the countertop and wall cabinets. Usually this part of the wall is lined tiles. But it is possible to use many other materials to cover it, for example, gluing wine corks to the wall.

Such exclusive decor looks pretty great.

Before sticking, each cork is cut lengthwise into two halves with a sharp stationery knife. It is advisable to paint the wall black, which will highlight the seams between the plugs.

Corks are glued to the wall using liquid nails in a checkerboard pattern or with a specific pattern, since it is unlikely that it will be possible to lay them out perfectly evenly, and curved rows will visually look disgusting.

The plugs themselves are not afraid of moisture, but they quickly get dirty and are difficult to wash, so it is best to cover them with a glass screen made of tempered glass. True, you will have to spend a little money on it and order glass from a special workshop, where they will cut it to a given size and make holes for sockets and fasteners.

Glass is fixed to the wall anchor dowels , which can be purchased at almost any hardware store.

Although the apron, decorated wine corks, may turn out to be an expensive pleasure, but achieved result will be worth it.

The surface of the tabletop, as well as the wall, can be decorated with corks and covered with tempered glass.

Hanging folding table

Wall mounted folding table allows you to save some space in the apartment. When folded down, it can protrude from the wall at a distance of no more than 10 cm and does not bother anyone at all, but when unfolded it can replace a full-fledged table.

There are many options where you can use a wall-mounted folding table. Here are just a few of the most basic:

Shower for the cottage

There is probably nothing better than cooling off under running water on a hot summer day, especially if it was spent working in the garden. Naturally, only a shower will solve this problem and relieve the fatigue that has accumulated during the day.

You can install the shower yourself without involving outside help; the main thing is to choose a place for it and decide on the type of shower stall.

Among the summer showers, three types of cabins stand out:, which you can freely build on your own:

Installing a simple shower is done as follows:

1. A shower cabin frame is made, which can be assembled from metal, wooden beam or other available materials.
2. A metal or plastic water container, which can have a volume of 50 to 200 liters, is installed on the roof of the assembled frame.
3. Metal container It is advisable to paint it black for better heating of the water. Additionally, several heating electric heating elements can be installed in the container, then you can take a shower even in cloudy weather.

The booth can be sheathed with boards, plywood, slate, or simply covered with tarpaulin or cellophane film with folding curtains.

For construction on your own

The topic of construction or renovation probably worries everyone. And, naturally, everyone who is involved in it wants to finish it quickly with minimal financial costs. Therefore, if you want to save money, you can make some materials for construction on our own. For example, these could be wall SIP panels or something like this useful tool, like a vibrating plate, the need for which often arises for many owners of a personal plot.

Homemade SIP panels

To make them, you need to prepare a flat, hard platform. Place a sheet of OSB 10-12 mm thick on it using a rubber spatula with teeth, apply glue to it.

Then lay sheets of grade 25-30 foam plastic on the glue. After this, an adhesive mass is applied on top of the laid foam, as well as on the bottom OSB board, and a second sheet of OSB is laid on top.

If several slabs are being made at the same time, stacked, the work should be done quickly until the glue hardens. Typically, no more than 4-5 panels can be prepared in this way at a time.

After preparing the formed slabs, you need to create pressure using a press. Since at home, of course, there is no hydraulic press, it can be replaced with a thick plywood sheet laid on prepared SIP boards over the entire plane and loaded for 2-3 hours, for example, with several bags of cement, sand or other cargo. You can even use a passenger car, driving onto a plywood sheet along a pre-made overpass.

After the glue has completely dried, the homemade panels are ready; they can be placed in a separate stack and you can begin preparing new panels. The manufactured panels should lie unloaded for another day, after which they can be used for their intended purpose.

Making a vibrating plate

To make homemade vibrating plate, you will need to prepare:

1. An electric motor with an IV-98E eccentric, which is the main part of the vibrating plate.
2. Steel sheet, thickness of at least 8 mm, size 450x800 mm. It can be ordered at any metal warehouse.
3. Two pieces of channel no more than 400 mm long.
4. An inch pipe for the handle and two rubber bushings for attaching it.
5. The tools you will need are a welding machine, a grinder and a set of wrenches.

On the narrow sides of the slab, stepping back 80-100 mm from the edges, make an incision with a grinder to a depth of about 5 mm. After this, bend the edges towards the cut at an angle of approximately 25 0 and weld them. The bends are needed so that the vibrating plate does not sink into the material it compacts and moves freely along its surface.

Then, across the slab at a certain distance calculated for mounting the electric motor, two channels are welded with the shelves down. Through in advance drilled holes in the channel, using M10 bolts, an electric vibrator is attached to them.

The handle, made of pipe, is attached to the vibrator through soft rubber bushings, which can be purchased at an auto parts store or hardware store in the hardware department.

Thus, you can make a lot of useful household things with your own hands, spending only a fraction of the money that you would have to pay when buying a finished product. You just need to put in some effort and have certain skills.

A summer cottage is an area where you can give yourself the freedom to conduct numerous experiments and dream to your heart’s content. This manifests itself not only in interior design, but mainly in the design of a garden or vegetable garden. Inquisitive and inventive owners have long been no longer guided by expensive and standard methods for arranging their plots, since there are a lot of alternative solutions for virtually all areas of activity.

There are several types of vertical beds that allow you to optimize the use free space. Non-standard designs – a great opportunity create interesting design garden, vegetable garden, summer cottage.

This type of beds is in most cases used for growing ornamental plants or herbs.

Materials for production:

Length drainpipes regulated in accordance with the wishes of the owner of the site. However, you should not make bulky beds, as they can complicate movement around the area.

Creating a bed

Stage 1. Create a container. To do this, take a drainpipe, cut it in half lengthwise and put special plugs on both sides.

Stage 2. We take the prepared metal holders and put them on the resulting frames for the beds.

Stage 3. We make holes in the pipe. They are made in those places where metal fasteners will be located.

Stage 4. We pass a cable or strong rope through the holes made.

Stage 5. Fix the cable/rope using fasteners.

Stage 6. Fill the resulting beds with expanded clay and soil.

Stage 7. Plant the plants in the beds.

Stage 8. We hang the pipes to the selected location. Sometimes a special wooden crossbar is installed for this purpose, or rather a structure in the shape of the letter “P”.

Step 9: Alternatively, a special design can be made for the pipes.

Important! A bed made of drainpipes is not resistant to strong gusty winds, so you should choose a place for it that is not blown from four directions by winds. Otherwise, the frame will quickly collapse, nullifying all your efforts.

A garden bed made from plastic bag, is another modification of vertical beds. It is extremely compact, functional and interesting in appearance. You can make such a bed in a couple of hours.

Materials for production:

• durable polyethylene film;
• sewing machine;
• priming;
• seedling.

In order for the bed to be strong, it is recommended Special attention pay attention to the thickness of the polyethylene film, which in this case will act as the “frame” of the structure. The minimum film thickness is 0.2 millimeters.

The process of creating a polyethylene bed

Step 1 . We cut out 2 rectangular pieces of film, the size of which corresponds to the size of the bed being created. An allowance of one and a half to two centimeters should be left on each side. The recommended diameter of the bed is twenty centimeters.

Step 2. Sew the rectangles together, leaving only the top part bag.

Step 3. We sew a handle to the future bed, the strength of which will allow it to withstand the weight of the bag filled with soil. It should also be taken into account that when watering the weight will increase.

Step 4. Fill the bag with fertilized soil.

Step 5. We make horizontal cuts on the bag in increments of twenty centimeters. They are necessary for planting seedlings in the garden bed.

Step 6. Plant seedlings.

Step 7. Regularly water the soil and add the necessary fertilizers.

With these simple steps you can get a cheap and useful garden bed.

An integral element of every summer cottage is a compost heap. This is the place where all sorts of biochemical reactions take place to create fertilizers.

To create fertilizers that will satisfy all the requirements placed on them, several key steps should be carefully considered: creating the container and directly correct production the compost itself. Let's talk about each of them in more detail.

Stage 1. Take eight support posts of the same length.

Stage 2. Processing bottom part wooden posts with motor oil or tar.

Stage 3. We dig the posts into the ground so that they are reliable and stable. If compost bin will be located next to the fence, then 4 posts (that is, one side) can be attached to the fence. This will avoid having to dig 4 holes.

Stage 4. Between each two adjacent posts we nail the crossbars so that we end up with three independent sections. Be sure to leave gaps that will serve as ventilation holes.

Stage 5. In two sections, we nail the boards horizontally to half the height of the pillars. In these places it is planned to create two small doors.

Step 6. The remaining section will have a large door, so only one board should be nailed. It should be located at the very bottom in a horizontal position, that is, like a regular crossbar.

Stage 7. Install the covers. To do this, you can use one large solid board.

Stage 8. Install the pre-prepared doors.

Stage 9. We provide the doors with handles and latches.

Stage 10. We process the wood using special impregnations.

Stage 11. Paint the box in any color that suits your preferences.

Many gardeners mistakenly believe that any components can be dumped into a compost heap. In reality, to create the right biofertilizer, the “ingredients” must be carefully selected.

Among the required components compost heap the following components:

• peat;
• ash;
• needles;
• tree branches;
• leaves;
• hay or grass;
• wood ash;
• plant roots;
• raw vegetables and fruits, etc.

All elements are randomly mixed in a heap. To speed up chemical reactions It is recommended to cover the pile with a tarpaulin (this is especially true if there is no box).

Trips to the dacha with the family require the presence of entertainment elements on the site that will delight children. The most common way to keep young summer residents occupied is a swing.

Building a swing yourself is not an easy task, but it is quite doable. Of course, you can always take a stick, tie it with a rope and hang the structure on a tree, but this can hardly be called a full-fledged swing. Real craftsmen prefer to build convenient designs with a comfortable seating area.

Structural components:

• two logs;
• strong rope.

Indicators:

• log diameter – 85 mm;
• log length – 700 mm;
• distance between ropes – 500 mm.

Making a swing

Stage 1. We stretch the ropes between the logs.

Stage 2. Wrap ropes around each log.

Stage 3. Let the ropes out.

Stage 4. Tighten the ropes to 3 knots.

Stage 5. Attach the swing to the tree.

Important: this swing is designed for only one person.

Garden path from scrap materials

There are several types of garden paths that you can easily make with your own hands.

Step 1. Remove the sidewall from the tire using a knife or saw.

Step 2. Cut the tires.

Step 3. Line the space with corrugated stripes.

Step 4. Paint the path with paint.

Step 5. Sprinkle with stone chips.

This economical option for those who don’t want to rack their brains and waste time on a full-fledged garden path. Tire paths are usually used for vegetable gardens, as they are easily laid in the ground.

Stage 1. Paint the corks in different colors.

Stage 2. Dig a small trench.

Stage 3. We drive in supports to strengthen the future path.

Stage 4. We construct the formwork using boards.

Stage 5. Install spacers along the edges of the trench.

Stage 6. Place crushed stone deep into the trench and compact it thoroughly.

Stage 7. Make a solution from sand, cement, glue and water.

Stage 8. Pour the solution into the trench.

Stage 9. Press in the plugs in random order. Smooth multi-colored stripes look interesting.

These are the simplest and quick ways make a garden path without purchasing expensive materials.

DIY tools

The expression “everything comes in handy around the house” turns out to be more relevant when it comes to cans. From this plastic container you can make a large quantity indispensable tools, which are actively used in the process of dacha work.

To make this tool we only need sharp knife and the container itself.

Stage 1. Cut off the bottom of the canister.

Stage 2. Mark a cut line for the scoop on the container so that the handle of the canister is the handle of the future tool.

Stage 3. Cut off excess material.

Due to these simple actions we get an excellent scoop with a comfortable handle.

Materials:

Manufacturing

Step 1. Wash the canister thoroughly so that no odor remains in it.

Stage 2. Cut the canister vertically into two parts.

Stage 3. We make a groove on the board using a woodworking machine.

Stage 4. Apply glue to the plywood and insert it into the bottom of the canister.

Stage 5. Paint the resulting shelf using a spray can.

Of course, this design will not withstand a lot of weight, but it is quite suitable for storing small parts.

Materials:

• 40 cans;
• scissors;
• rope;
• paper;
• marker.

Stage 1. Pierce the top of the canisters with a knife.

Stage 2. Make a stencil from paper.

Stage 3. Apply it to the canister and outline it with a marker.

Stage 4. Cut out large holes using scissors.

Stage 5. We stack the prepared canisters in several rows, tying each row by hooking a rope under the handles of the containers.

Stage 6. We tie all the rows around the perimeter for greater strength.

Stage 7. If you plan to lean the cabinet against the wall, then drill it to the surface.

Stage 8. Place heavy objects - stones or bricks - in the bottom row.

The result is a fairly spacious and functional rack that will help get rid of the problem of storing many small parts.

Be resourceful and bold in implementing your ideas. Good luck!

Video – DIY crafts for a summer cottage

Video - We do it ourselves for the dacha

Homemade products for the household will help make your home cozier and more comfortable. Self made fixtures and decorating old household items will allow you to give things a second life, which will significantly save your budget. This will also allow you to decorate the environment and make the interior more creative. Some homemade products for the household will visually increase the space and create comfort.

Folding chair

It is not always possible to financially purchase some furniture in a store. You can successfully get out of this situation if you make crafts with your own hands. For example, it is enough to simply make from and

The folding part (chair legs) is attached using hinges or mounted on a metal pin, which is secured at the edges with nuts. The tarpaulin is cut into two rectangles, with grooves for the bars sewn on the sides. The side parts of the top of the chair (back frame with armrests) are made in the form of the letter “b”. They are connected with bolts or self-tapping screws. It should be remembered that the folding lower part must be fixed in the working position. Therefore, not far from the connecting pin on the legs of the chair you need to attach a metal hook - it will firmly close this structure.

Who cooks porridge in the little house, gathers guests

Craftsmen familiar with saws and drills can even small apartment make a children's room. To do this, you need to build something like a screen with doors and windows from plywood or other fairly light material. Corner connections the slabs will imitate the corners of the house. Having painted the homemade screen accordingly, the master will turn it into a miniature children's mansion.

You just need to make sure that this screen can be firmly attached to the walls. After all, the safety of children is paramount! And they will fit quite well inside children's table, and a crib, and a box with toys.

Or you can even sew it. For such walls, any bright fabric that can simply be hung on a rope, wire or solid cornice is quite suitable.

Knitted furniture

Today it has become extremely fashionable to make benches. They use such homemade products for the household, storing various items inside: toys, bedding, pots, cereals. They can be placed in the kitchen, nursery or living room. They are also very convenient for relaxing both in a city apartment and in the country.

To make furniture with storage drawers, you must first make a frame for it. The bench consists of a rectangular box mounted on legs. The soft part is knitted in the form of a rectangular parallelogram without one base and put on the lid. You can insert an elastic band into the lower part so that the elegant “upholstery” is pulled together at the bottom of the bench.

The pouf can be given either a square or cylindrical shape. To do this, around the circumference of the lower wooden base stuffed vertical racks, which are then connected at the top with thick wire. Plywood shields are stuffed between the racks to prevent things from falling out of the “storage.”

The upper round base is cut out separately. The soft part is knitted in the form of a cylinder and secured to the top part of the pouf. It is placed on top of the pouf like the lid of a hat box.

Using used clothing in homemade crafts

Who has a collection useful tips for the household, you must make the following entry in it: “Do not throw away an item until you are convinced of its complete disrepair. Try to give every item a second life!”

From old clothes, for example, you can knit or weave creative upholstery. Unnecessary tights are widely used, which are cut into a spiral and slightly stretched to twist the strip into a tube. You can use other material, also cutting it into strips and sewing them together. The “yarn” is wound into a ball, from which it is then knitted with fingers or woven into fabric.

Knitting without knitting needles repeats the algorithm of regular knitting. Only the loops are held directly on the fingers. And they also pull the thread.

For weaving, you can use a frame, along the edges of which nails are stuffed. The thread is first laid crosswise, wrapping around symmetrically located nails. They should all cross themselves at one point in the middle of the frame. Then the end of a thread of material is tied to the center and they begin to weave the fabric in a circle.

And the old refrigerator is in use

As a homemade item for the household, you can use used large household appliances. And then, instead of the tedious task of taking a washing machine or refrigerator to the trash bin, a creative solution may appear in the house. necessary thing. It will be both beautiful and useful.

The technique of converting refrigerators into incubators has long existed. However, such a thing is required only for those who are engaged in poultry farming and live in rural areas. And here they are original homemade products for home and dacha from refrigerators, like chests tied with fabric threads, will decorate your home and allow you to hide many useful things in them.

To make this piece of furniture, you need to remove the motor of the device. If you now put the refrigerator with the door up, then the frame of the chest is almost ready. All that remains is to knit the cape and sew a foam pad on its upper part, cutting out a hole in it where the handle will hide.

The cape should be made in the form of a rectangular parallelogram without a lower base. To make it easier to use the chest, you can sew a zipper lock into the side.

It's a matter of painting - everything will be like in a fairy tale

Non-working refrigerators can also be easily converted into cabinets. You just have to work some magic on their decor. You can make a creative piece of furniture in a cartoon style for a nursery or a fantasy style for a hallway, an antique style for a living room or a musical style for an office. It all depends on the imagination of the master.

Although a working refrigerator will become more creative if you paint it or stick an original film sticker on the casing. This will also protect the surface of the unit from scratches and corrosion.

Kitchen appliance decor

You can simply decorate not-so-new household items with stickers, appliqué, or paint pictures on the trim using paints for metal surfaces. The thing will again please the eye and sparkle with fresh colors. In just a few hours you can completely change the look of your kitchen, without even making homemade items for your household from scratch.

Microwave ovens, washing machines, cabinets and pencil cases are decorated with both pictures and drawings, and 3D decorations are glued onto them.

Each person, with his skillful hands, can create unique and even luxurious items for his home. You just have to think a little and make an effort.