In order not to envy your fellow fishermen who are hiding in reliable shelters from the severe frost and the prickly, evil wind, make a homemade tent for winter fishing. Do some unusual work with your own hands. Then staying on the pond during the cold season will become even more comfortable and memorable.

Let's figure out what the tents offered by various companies for fishermen are. There are many interesting solutions such a problem as shelter from bad weather on a winter pond. However, all design options for such devices can be reduced to three main groups:

1. Frame device. A tent consists of a collapsible frame, usually rectangular or prismatic in shape. A canvas cover is placed on the frame.
2. Umbrella device. The shelter frame consists of an easily assembled structure, created according to the principle of an umbrella. A canvas cover is also placed on top.
3. Automatic device. Very popular recently are designs with an automatically folding frame with already stretched water-repellent fabric. What is attractive about such devices is the speed and ease of setting up a tent.

If the prices for factory-made products are steep, think about a DIY project. With your own hands you can make a device that will satisfy all your personal wishes and individual characteristics fisherman After all, all people are of different heights, weights and constitutions. Some people love space, some love comfort and convenience, and some love simplicity and reliability. There may be a need to take into account the characteristics of local reservoirs and weather conditions.

The main thing for a winter shelter is reliability, ease of assembly and the ability to quickly move. Staying on a pond in winter requires significant and frequent changes in fishing spots, so think about these important requirements for future shelter.

It is important to carefully and correctly select materials for manufacturing. The fabric for covering should be light, waterproof, but at the same time breathable and retain heat well. Pay attention to thermal insulation Special attention. The main purpose of such a device is to keep warm.

For the frame, choose a light and durable material. Old cot from aluminum pipes, ski poles or durable and lightweight tubes - great option for making a winter tent frame with your own hands.

Think in advance about how you will assemble and move your creation, and how to heat it, if necessary. Before you start manufacturing, it is important to calculate the costs and think carefully about all the tasks to be solved.

The procedure for manufacturing the structure

So, the question arose of how to make a tent with your own hands, where to start, what is the manufacturing sequence. Here simple circuit sequence of stages of what is needed, so that you end up with the desired shelter:

A self-made tent will help you not to pay attention to the weather. No frost or wind will stop you from enjoying what you love.

During winter fishing, the angler needs to protect himself from many weather conditions that are acceptable in winter, and for this, a winter fishing tent is very suitable.

In addition, it increases the time the fisherman stays in cold weather. If used in a tent heating devices, then the air in it can be warmed up to 20 degrees and can be found freely in it without outer clothing.

Types of winter fishing tents

Winter tents are divided into types, which determine their design, installation and assembly.

• Umbrella. This type is considered the simplest in its design. It has an umbrella design, making it easy to install and assemble. To make the frame, duralumin rods are used, which increase the reliability and strength of the tent. The awning can be made of synthetic fabrics or a combination with tarpaulin.
• Machine. The scheme of their construction is that a tent is sewn to the frame. When assembling, it is enough to twist it into a circle, and it unfolds instantly due to the action of the frame, which works like a spring. Such tents are becoming increasingly popular among fishermen because they have a low price and light weight. But along with this, it has many disadvantages: poor resistance to wind, the frame easily breaks if the tent is not set up correctly.
• Frame. Its design resembles a regular one summer option. It folds out of several folding arches and an awning. She sorts it out in about 10 minutes, or even more. The tent is not particularly reliable. It is rare for fishermen to purchase this type of winter tent.

What requirements must a homemade tent for winter fishing meet?

Winter tent should create the most favorable conditions on cold, windy, winter days. In addition, it should serve as a place where you can cook a meal, drink hot tea and just warm up.

Now the market is full possible types tents, but it's still nice to make it yourself. If you are sewing a tent yourself, you must meet certain requirements:

• It should be light and compact.
• Since it is portable, the tent must be mobile.
• Select fabrics that are dense.
• It should be assembled and unpacked conveniently and quickly.
• When making it, it is better to give preference to stronger and reliable materials. The heat in the middle of the structure should be maintained for as long as possible.

What materials and tools will you need?

A very common homemade winter fishing tent is a design based on a fishing box. It can be bought at any store that specializes in selling fishing gear. In addition, you will also need some accessories:

• Skis, two pairs (children's and school version)
• Tubes, you can use ski poles.
• An old folding bed.
• Thick fabric, tarpaulin is best.

At first glance, it is not entirely clear what this design will look like. But, in practice, its effectiveness and ease of use have been proven. After completing the design, you should end up with a box that can be transported using skis. In addition, it is easy to assemble and move even on ice.

Drawings of a homemade winter tent

As you can see from the diagram, the tent is mounted on skis and this makes it easier to secure it on the ice. After all, mounting regular winter tents requires a lot of time and effort. And with such a design, the fisherman can move around the reservoir many times. Wherever a new hole is made, the angler drags it towards him and, having climbed inside, is ready for fishing in warmth and comfort.

Note! To reduce windage and make it easier to drag the tent in strong winds, you need to remove the awning from the tent. If you don’t do this, it will simply be difficult to drag it.

Step-by-step instruction

This design is very old, but very reliable. More than one generation of fishermen have tested it in practice.

How to make a tent with your own hands photo and pattern

• Ski poles will serve as a frame, where they are installed vertically. Horizontal tubes should be an order of magnitude thinner. The upper nodes must be made in the form of a triple connecting adapter and its end is made like a cylinder. It is worth noting that the diameters of the cylinder and the tubes with which they are connected must match.
• Next, the tubes are secured in a vertical position to the skis. A T-shaped tongue is inserted into a metal plate attached to the ski, which is located at the lower end of the tube. After this, the tube is rotated 90 degrees.
• Two tubes taken from a folding bed serve to connect the frame to the box. The end of the connecting product is secured to the end of the bent tube. The latch is installed at the other end of the tube.
• Eyelets made from copper strip will serve to connect the box with the tubes.
• At the end of all the work, all that remains is to pull the awning. Metal plates with slots are installed in its lower part. You need to insert staples into these slots, which are driven into the side ends of the skis. The connections are secured with laces. In order for the structure to remain stable on a frozen body of water, it must be equipped with two anchors.

Homemade tent pegs and screws

In order to make pegs that will be used for a winter tent, you need to take long and strong screws. The peg has a hook-shaped top. This process is performed using pliers. Screws are made of metal tubes that have threads. If you don’t have one, then self-tapping screws will do just fine.

How to sew a tent with your own hands in the form of a house

We can consider another very popular look tents that are made in the form of a house. For self-made You will need this tent:

• Fabric that does not get wet - 14 sq. m.
• Metal washers – diameter 1.5 mm (up to 20 pcs.)
• Braided rope – 15 meters.
• Not a wide tape - 9 meters.
• Rubberized fabric for bedding - 6 meters.

Having prepared all the materials, you can proceed to making a tent that can accommodate one or two people. To begin, cut out 2 pieces of fabric of the same size - 1.8 by 0.9 meters. A marking of 65 centimeters is made along the long side, and the same operation is performed on the other side. The fabric is cut at the connection points. This creates the entrance and back wall of the tent.

The diagram shows how to complete all other work step by step. The only thing you need to remember is that all the elements are sewn together with high quality. This is where tape will come to the rescue to strengthen the seams.

If regular fabric is used for the tent, then additionally polyethylene will need to be used. Rings are also sewn into the tarp so that the tent can be reinforced.

Assembling the tent on site

Assembling the entire structure takes a little time and effort:

1. Skis, the tongues of which are inserted into the slots of the plates, are connected to the halves of bent tubes, which should be located along the axis of the ski, and at the same time the ends are turned inside the tent by 90 degrees.
2. The ends of each pair of bent tubes are threaded through special holes on the ski racks.
3. The skis are connected to each other to create a rectangular shape.
4. Then a box is installed on this structure.
5. At the ends of the skis, four vertical pipes, which serve as racks.
6. The roof pipes are connected using a tee. Connecting parts are installed at the ends of vertical tubes.
7. After aligning the holes of the tubes and tees, the installation wires are pulled into them.
8. A tarpaulin is stretched over the frame and secured with laces.

The structure is dismantled in reverse order. To make the process faster, you can number the parts.

So, despite the fact that there are many different types of fishing winter tents, homemade, time-tested ones have not been canceled. They are easy enough to make yourself. But we must remember that they must meet all the requirements of the fisherman. After all, it becomes a temporary home and shelter from the frost.

When making your own tent, you should carefully design it and select high-quality materials.

DIY winter fishing tent - step by step guide

I thought for a long time about how to keep warm in a single-layer umbrella-type tent; I don’t want to carry a cot with me like some fishermen do. Using a gas oven for heating, it turns out that warm air stands under the dome of the tent, and instantly evaporates through the single-layer fabric, and below, as always, it is cold. Sitting on a fishing box, your feet get cold, and you can’t sleep at night. Due to temperature changes, condensation forms on the walls of the winter tent, and then turns into a crust of ice.

Accordingly, two problems need to be solved:

• Close the ice.
• Insulate tent fabric

Wandering around a construction store I came across some kind of insulation called “Izolon”. Thickness 10 mm, and price per linear meter quite accessible, so as not to regret if nothing comes of the idea.

Its height is 1500 mm, the length was 2 meters, the total result was a piece of 2000 mm by 1500 mm. I laid him on the floor of the tent, that is, on the snow. The cold from the ice stopped. Not the entire perimeter of the tent was closed, open area just enough for four holes, two per angler.

This piece was enough for two backpacks (so as not to stand on the snow) and two fishermen. You can sit comfortably, even without shoes, wearing only socks; if you lie down on a jack, you can sleep quite comfortably.

You can roll it into a roll (personally, it’s not convenient for me) or like paper, put the drag on top of the sled and reinforce it with rubber stretchers. Task number one - to cover the ice and snow inside the tent and prevent the entry of cold - has been solved.

Let's move on to solving the second problem - insulating the tent itself around the perimeter, i.e. strengthen the protection of the tent from the wind blowing away heat.

I found an old Soviet rag tent at home, I bought a new one, but I don’t need this one. I laid it out, figured it out, made a couple of cuts, a hole approximately in the center of the roof. It turned out to be a slip-on cover.

The fabric of the Soviet tent is quite thick, it lies with folds, this creates a small layer of air, which is good for retaining heat.

The door of the Soviet tent was combined with the door of the main one.

As a result, the heat inside the tent is retained 4-6 times longer, gas-burner Before the tent was redesigned, it worked at maximum flame for about 14 hours, after which the 5-liter cylinder ran out, now the flame is half as much, it’s hot inside, you can sit without shoes in a T-shirt.

Condensation does not form on the walls, the tent is dry. And, what is also important, it is no longer blown by the wind. Tested in cold weather -21°C. It became darker inside, a ceiling light solves the problem.

The cover is rolled up, length 40 cm, thickness 25 cm, weight 1.3 kg.
Task number two - insulating the umbrella tent around the perimeter and increasing wind protection - has been solved.

As they say, “It’s warm, it’s light and the flies won’t bite.”

Reshetnikov Ilya, Nizhny Tagil, Sverdlovsk region, RF - Especially for Homemade FISH

• How to make a floor in a winter tent
• Heating a winter tent with candles

Winter fishing is a lot of positive emotions, which can be diluted with some of the negative emotions associated with weather conditions. It is not difficult to imagine the discomfort an angler feels in the presence of frost, and even wind, which increases the feeling of cold. The wind may not be strong, but it can bring a lot of problems. If you have a winter tent for fishing, then some of the problems can be reduced to zero.

The presence of a tent allows you to increase total time stay of the fisherman on the reservoir in winter. Moreover, you can easily raise the temperature in the tent to above zero, which will allow the fisherman to feel very comfortable.

Depending on the design features, winter tents are divided into specific models.

Umbrella

These are the most simple designs, which is easy to assemble and install. To make the frame of such a tent, you should use durable but lightweight materials. Synthetic fabrics or their combinations with tarpaulin are more suitable as an awning for covering.

Machine

The design is designed in such a way that the frame acts as a spring, which takes the desired shape when it is released from the packaging. They are quite popular due to their simplicity of design and lightness. Despite this, these tents have a number of disadvantages. Firstly, they are not resistant to strong winds, and secondly, they are not so easy to fold. Therefore, when going fishing, you will have to practice beforehand. It unfolds itself, but without the skills, it will be very difficult to fold it and if you overdo it, you can break it.

Frame

This tent consists of several folding poles and an awning that covers this frame. We can safely say that this is the same simple option, but it takes a long time to assemble and disassemble. In addition, it is not particularly durable. Therefore, fishermen rarely purchase such a design.

Requirements for a homemade tent for winter fishing

A tent for winter fishing should protect the fisherman from wind, frost and precipitation. Moreover, the tent should have enough space to relax so that you can cook lunch or just drink tea to keep warm.

In specialized retail outlets You can buy any tent, especially since the range is very large. Be that as it may, some fishermen make them themselves, taking into account all the requirements. Besides, who else but the fishermen knows what kind of tent is needed. Moreover, not all factory-made models meet the requirements of winter fishing enthusiasts.

A homemade tent should be:

• quite light and compact;
• mobile so that you can move easily;
• covered with dense but breathable fabric;
• easy to install and dismantle;
• durable and strong, and also retain heat for a long time.

To work you will have to stock up on these tools

Most tents made by anglers themselves fit into a fishing box. By the way, you can also make a box yourself, which is what many fishermen do, although you can buy it. In addition to the box, you will need the following accessories:

• two pairs of skis, one for children, one for school;
• tubes. In this case, it could be ski poles;
• unnecessary folding bed;
• dense fabric, such as tarpaulin.

At first glance, how can you build a tent from such a set of elements? But, nevertheless, such a design proved that it has the right to life. The final product fits into a fishing box, which is very easy to transport on ice. The structure is quickly and easily assembled and just as easily moved on ice in working condition.

The only negative is that there is little space in it. But if you approach the problem constructively, then it is possible to solve it and increase the size of the tent. Paradoxically, it protects from the cold, and this is the main thing.

Drawings of a homemade winter tent

Judging by the drawings, the tent is mounted on skis, which simplifies its installation on ice. Regular tents require special fasteners. In addition, skis allow you to move the entire structure around the pond countless times. As a rule, winter fishing is not limited to one punched hole - there can be ten, or even more, and each hole has to be fished.

The only thing is that it is problematic to use it in the presence of strong wind, since it is mounted on skis, the wind will be able to move it across the pond on its own. In this case, you can get used to it and use the power of the wind to move it. The main thing is to drill the holes correctly.

Step-by-step production

Despite the fact that this design was born a long time ago, many anglers have tested it in harsh winter conditions.

How to make a tent with your own hands

• Ski poles act as a frame and are installed vertically. Horizontal tubes should be thinner. At the corners, the frame is connected using tees, the diameter of which must match the diameter of both vertical and horizontal tubes.
• The next step is to attach the vertical tubes to the skis. A metal plate is attached to the ski, into which a tongue is inserted in the letter T, attached to the lower end of the tube. To secure the stick, just rotate it at an angle of 90 degrees.
• Two sticks are prepared from an old cot that will connect the frame to the box. Take a bent tube, at the end of which there is a docking unit. At the other end of the tube there is a latch, which serves as a fastening element for the docking unit.
• A spring is made from a copper strip that connects the box to the tubes.
• Finally, all that remains is to pull up the awning. Metal strips with holes are attached to the lower part of the awning. The brackets attached to the ends of the skis are pulled into these holes. The awning is connected to the brackets using ropes. For stable behavior of the tent on ice, it is equipped with two anchors.

How to make fasteners

If the tent is not secured on the ice, then at the slightest movement it will shift in any direction, especially in the presence of wind. Therefore, you need to make special pegs with threads at the end. For this purpose, long and strong self-tapping screws are suitable, the top of which is bent in the form of a hook. By the way, hardware stores sell hooks with threads of any size.

How to sew a tent with your own hands

Alternatively, you can make a tent in the form of a house. To make it you need to take:

• Water-repellent fabric with an area of ​​14 square meters. meters.
• Metal washers, 1.5 mm in diameter, 20 pcs.
• Braided rope, up to 15 m long.
• Narrow ribbon, about 9 m long.
• Fabric for bedding, rubberized within 6 m.

Such a tent can accommodate one or even two people. First of all, you need to prepare two pieces of fabric measuring 1.8 x 0.9 m. Marks are made on the 1.8 m side every 65 centimeters. The same is done with the other (0.9 m) side. The fabric should be cut at the joining points to create the entrance and back wall of the tent.

The diagram shows the implementation step by step further work. Most importantly, all parts must be sewn securely. Use tape to reinforce the seams. There are times when a tent is made from ordinary fabric. In case of bad weather, polyethylene film is used, which can protect against wind and precipitation. Metal rings are sewn into the fabric for fastening. As a rule, they are located at the bottom of the awning, as well as in the places where the fabric is attached to the frame.

Setting up a tent on a pond

Assembling a homemade tent on skis takes a minimum of useful time:

1. The skis on which the tongues are attached are connected to the halves of the tubes located parallel to the skis. They should be pointing inside the tent.
2. Each pair of bent tubes is threaded through special holes located on the ski racks.
3. The skis are connected to each other to form a rectangle.
4. A fishing box is installed on the structure prepared in this way.
5. Vertical posts are installed at the ends of each ski. There should be four of them.
6. Tees are taken and with the help of them a roof is formed. They are installed on each vertical post.
7. Using horizontal tubes, the frame is finally formed.
8. Fabric is thrown over the frame, which is attached to the frame using short ropes.

A similar tent is disassembled in the reverse order. If each structural element is numbered, the process of assembly and disassembly will take slightly less precious time.

Naturally, a tent can be purchased in a store, but not every winter fishing enthusiast is ready to purchase one, due to the lack of extra funds. It is much cheaper and easier to make it yourself.

The arrival of winter, with its sub-zero temperatures, piercing winds and prickly drifting snow, does not mean that going out into nature should be postponed until next summer. Of course, most people prefer to sit peacefully in warm apartments, but there are those who are not at all afraid of -20 on the thermometer. They are preparing for winter fishing tackle, select warm clothes and shoes and apply maximum ingenuity in such a matter as insulating a tent. This completely solvable problem should be considered based on their experience.

Correct location

Tent location in winter

Any more or less experienced fisherman will tell you that putting up a tent on a pond in a place convenient for you, where the shore or trees can protect from the wind, is not fishing - it’s just a camping trip. The fish gather in places that are convenient for them. She, of course, takes into account climatic and relief features, but they are often radically different from our preferences. Therefore, lovers of winter fishing have developed some rules for installing a tent, which can be applied under other conditions.

The main source of cold in open space not frost at all, but wind. You can protect yourself from the cold with quality clothing. It is much more difficult to hide from the wind. That is why the tent should be installed so that the entrance is on the leeward side, and to prevent blowing, it is recommended to sprinkle the lower perimeter with snow.

Insulation methods

Insulating a winter tent with polyethylene

There can be several ways to insulate a tent with your own hands. Some of them can be used in combination, some exclude the rest. You can only choose after trying several times, but we will try to carefully consider the most popular ones to make your choice easier.

• Insulating a winter tent with polyethylene. The most affordable way to help protect yourself from rain and snow. However, he cannot save for long. On inside Condensation will accumulate, and the material itself is quite light and it will be necessary to carefully secure it, at least with clothespins, and this will greatly increase the time it takes to set up the tent.
• Double tent. Or an additional awning, which can be easily made from an old tent or a special cover can be sewn, for example from tarpaulin. This method is much more effective than polyethylene insulation, but requires additional preparation at home.
• Internal insulation. In specialized stores you can find a wide selection of isothermal insulation based on padding polyester, silicone and the like. They are covered with double-sided breathable fabric and provide excellent protection from moisture. Their cost, of course, is quite decent, but they also provide a solid guarantee of heat. There are more a budget option: heat reflector on foil, fixed to the inner walls using clips. You will have to tinker with it in the cold, but the heat from the heater will linger inside the tent much longer.
• Insulated floors. The main source of cold inside the tent is frozen ground, snow or ice if you are fishing. The most simple solution cutting off this source will be the use of tourist rugs. They are made of a special porous material and are intended specifically for this purpose. But it should be borne in mind that after some time they will begin to transmit heat downwards, which can lead to the melting of ice or snow and the formation of an elementary puddle right in the middle of the tent.

The listed methods, individually or in combination, will help keep the tent warm for a while and are used everywhere, especially if you are planning to be in nature for only a few hours. However, this is often not enough to spend the night on a pond or in a winter forest.

Forced heating

Paraffin candles

The most effective way to insulate a winter tent is to use simple or complex heating devices or objects.

• The most affordable in this regard are ordinary paraffin candles. When not too big sub-zero temperature they will cope with this task quite well, especially if you place the candle in a thermos flask. This achieves two goals at once. Firstly, safety increases significantly, because even if you accidentally knock over such a heat source, you will not set anything on fire. Secondly, the flask itself warms up from the candle fire and begins to intensely radiate heat.
• In second place is the old, proven method of heating a tent using a hot stone. However, you will have to find this very stone, which is somewhat difficult to do in winter. Then make a fire, heat the stone on a live flame and bring it into the tent. To prevent it from burning the floor and melting the ice on the floor, you can place it in a metal pot, which, by the way, will increase the operating time of such a “heater,” or wrap it in several layers of foil.
• Gas heater. A special compact device running on liquefied gas, designed specifically for tourists, fishermen and other outdoor enthusiasts. There can be two types depending on the nozzle:
• With metal nozzle.
• With ceramic nozzle.

They are very easy to use and do not take up much space, but their operation is limited by the size of a stationary cylinder, so it is better to take a spare one with you.

• Gasoline heater. There are compact and inexpensive models. Unlike gas ones, they are even more unpretentious, but the fire hazard increases significantly. Requires increased attention and caution.
• And, of course, a wood-burning stove. Not very convenient for transportation. Of all the above options, heating a winter tent using compact stove can be called the most ideal.

There is no need to be afraid of frost and hide your noses behind double-glazed windows and an insulated safe door. A winter trip to the bosom of nature, if well prepared for it, will give you indescribable pleasure, give you a huge boost of energy and lift your spirits for more than a day or two.

DIY tent - how to make it

Outdoor recreation can bring many pleasant moments and new experiences. To make your impromptu vacation enjoyable, you need to take care of a place to stay. For this purpose, summer and winter tents of different capacities and shapes are used.

But what to do if you couldn’t find a suitable tent or its cost is too high? There is only one way out - to make a tent from scrap materials with your own hands. Fortunately, this process does not require major capital investments, and the production itself will take a minimum of time.

How to make a tent yourself

Most tourists prefer to buy ready-made tents, because modern market There is a huge variety of models: summer, three-season and for winter fishing. But, if you do not have the opportunity to buy such a design, you can sew it yourself.

Picture 1. Step by step diagram manufacturing

The easiest way to make a tent is in the form of a house. It is suitable for fishing, for the garden, and for outdoor recreation. To make a simple two-person shelter, you will need a piece of water-repellent fabric approximately 14 square meters in area, 20 metal washers with a diameter of 1.5 mm, narrow strong tape 9 meters long, 15 meters of braided rope and rubberized fabric (about 6 meters) that will act as the bottom (Figure 1).

The frame of such a tent, if desired, can be made from PVC pipes. But, if you need a lightweight and mobile design, it is better to do without them.

The product is manufactured step by step as follows:

1. First, cut two pieces of fabric measuring 0.9 x 1.8 m.
2. On the longer side you need to put marks every 65 cm. Similar actions are performed on the short side.
3. The fabric is cut at the joining points so that you end up with the entrance to the tent and its back wall.
4. Next, all joints need to be stitched. To make the seams strong, it is advisable to reinforce them with tape.

If you don't have a special water-repellent fabric, you can use regular fabric. In case of bad weather, this structure is simply covered with film. In addition, it is advisable to sew rings along the edge of the tent, with the help of which the shelter will be fixed to the site. Typically, such rings are placed at the bottom of the awning, but they can additionally be installed at the place where the awning is attached to the frame.

What materials are required

It is quite possible to sew a tent, including a fishing tent, using available materials. But in order for the shelter to be truly durable and provide good protection from bad weather, you need to strictly follow the manufacturing instructions and select the right materials (Figure 2).

The tent will reliably protect you from bad weather in summer and winter if it meets the following requirements:

1. The structure must be made of durable and reliable fabrics that can withstand heavy rain, snow and gusts of wind.
2. The product should be made in accordance with the number of vacationers, and not only the number of vacationers, but also their height should be taken into account. Only in this case will all residents be comfortable under the awning.
3. The weight of the finished structure is also important, especially if you are going not just fishing, but on a real hike with long treks. Considering this factor, it is better to make the frame not from plastic pipes, but from durable thin wire or plastic strips connected with an elastic band. The design of such a frame can be borrowed from trekking or children's tents.

Figure 2. Tent materials must be durable and waterproof

Taking into account all the requirements described above, you need to be very careful when choosing materials. They must be durable, waterproof and lightweight. As a basis for an awning, you can use tarpaulin, percale (including rubberized), raincoat fabric or special tent fabric. Last option considered the best.

The initial amount of materials directly depends on the size of the future tent, although the difference will not be too big. For example, a gable or single-pitched tent for 3-4 people will take 3 square meters less fabric than a gable structure of the same capacity.

In addition to the fabric itself for the awning, you will also need some additional materials: strong ropes for fastening the structure, tapes for finishing seams, a bottom made of waterproof material, thread and a needle for sewing.

Types of tents

Regular summer camping tents can be made in the form of a house, a dome, or be pitched. A winter tent is considered more complex, which should protect residents from precipitation and low temperatures.

You can also make a tent for children with your own hands. This design is even simpler and can be made in just a few hours.

Since the winter tent is considered the most difficult to manufacture, we will look at what types of such shelters exist. By the way, such a homemade awning can be used in the forest in the summer, but to do this you will have to make a choice in favor of lighter materials for the awning (Figure 3).

So, durable and resistant to precipitation come in the following types:

1. Umbrella: The simplest version of the awning, which can be installed in just a few minutes. This is possible thanks to a special umbrella roof structure. The frame of such an awning is made of plastic or duralumin tubes, which are connected to each other with a durable rubber band. The frame is covered on top with a tarpaulin or other synthetic waterproof fabric. The only drawback of this design is the low level of vapor permeability.
2. Frame: installed on arches. This design is suitable for camping, but fishermen are not very fond of such tents, since even after installation and fastening the tent is not very stable in strong wind. The design of a frame tent is very simple. As a basis, several arc frames made of fiberglass and duralumin are used. The shape of the tent can be any, and the frame is covered with an awning on top.
3. Machine: the most modern and easiest to install option. The base of the tent consists of thin and flexible metal rods. With their help, the tent can be quickly unfolded and then assembled into a compact cover. The disadvantage of this model is considered to be low resistance to adverse factors. environment. That is why it is used for one-day fishing or short recreation in nature.

Figure 3. Main types of shelters: umbrella, automatic and frame

All types of tents described above can be made with your own hands using detailed drawings and step by step instructions.

Drawings and product diagram

Drawings of simple tents can be found on the Internet and used as a basis for drawing up individual scheme products (Figure 4).

Figure 4. Drawing of a summer and winter tent

To ready product was of high quality and comfortable, you need to draw up a plan for its production on paper. First you need to measure desired length and the width of the future awning. To do this, it is necessary to take into account the physical parameters of the residents, in particular their height. In calculations, it is advisable to focus on the height of the tallest person, adding about 50 cm to his height. Then you can not only sleep comfortably in the tent, but also have enough space left free space for placing personal items.

Next, you need to draw up a pattern on paper or directly on fabric. Keep in mind that any tent consists of a floor, a roof and four side walls. There will be a zipper sewn into the front (front) part. Once the pattern is drawn, you need to transfer it to the fabric and cut out the details.

Further actions are performed in the following sequence:

1. All parts need to be sewn together, and a zipper must be sewn into one of the side parts.
2. In order for the tent to be durable, all cuts must be properly processed. A wide tape is usually used for this.
3. It is better to make the floor and back wall of the structure from denser materials or lay out several layers of material.
4. All parts of the product are connected to each other with a thick double or linen seam. This will prevent the tent from leaking moisture even in the heaviest rain.
5. It is advisable to hem the ridge with braid. It must first be washed and then dried so that it does not shrink when wet.
6. You need to lay a thin clothesline between the skate and the braid. Its ends are tied with loops and stretch marks are attached to them. The place where the loops are fastened can be covered with a patch.
7. At the opposite ends of the ridge you need to make holes into which the posts will be inserted. To prevent the slits from tearing, their edges must be treated with strong threads or metal rings inserted into them.

Near the entrance to the tent, you can additionally make a threshold with a zipper. It will prevent the interior of the awning from moisture and dirt.

Manufacturing of fasteners

The production of fastening elements for a two-person canvas tent deserves special attention, because the stability of the structure and its ability to withstand the wind will depend on their quality.

We are talking about pegs and screws that are used during the installation of the awning.

The material from which the fasteners are made depends on the season of the intended holiday. For example, if you are going outdoors in the summer, it is better to make the fasteners from light metal so that the folded tent is easy to carry. If desired, they can be made from any available materials while in nature. Strong branches with a sharpened edge will do so that they can be easily stuck into the ground (Figure 5).

If you want to make your own metal fasteners, be prepared for the process to take a long time. For this purpose, it is best to use long metal rods or strong screws. The top needs to be bent into a ring, and the bottom of the screw is already sharp enough and will fit into the ground without any problems.

Figure 5. Homemade fasteners can be made from thick wire or self-tapping screws

As for the screws, it is better to use metal tube threaded. For ease of use, it is advisable to secure the handle at the top.

The main stages of manufacturing the structure

In previous sections, we have already looked at how to cut the base for a tarpaulin tent. Now let’s look in more detail at how best to sew a product so that it can withstand strong gusts of wind and not get wet in the rain (Figure 6).

To strengthen the tent structure, follow these instructions:

1. All panels are sewn together with a double seam. To further strengthen its edges, it is advisable to coat it with rubber glue. This is guaranteed to protect the interior of the shelter from moisture penetration.
2. A pre-washed braid should be secured to the ridge. In this case, it will not shrink and will serve as the basis for a reliable roof.
3. Any stripes that are on the surface of the awning must be sewn along the edges, capturing both the fabric and the loop. This will provide a reliable connection and at the same time protect the awning from moisture.
4. It is advisable to provide a ventilation hole with a sleeve in the rear wall.

Figure 6. Main manufacturing steps makeshift shelter

If you were unable to get waterproof fabric, you can sew a tent from regular tarpaulin and additionally make an awning from film that can be thrown over the shelter in case of heavy rain.

Rules for setting up a tent

If you strictly followed the instructions for making the awning and frame and used ready-made drawings of tents for hunting, fishing and outdoor recreation, there are no particular difficulties with assembly homemade design should not occur (Figure 7).

Figure 7. Installation of a homemade tent is carried out in the same way as a regular one

In most structures, the tent itself is first laid out on the ground, then the frame arcs are inserted into the slots and loops and secured to the ground surface using special pegs. As a result, the tent takes on a clear shape and stands securely on the ground. At the same time, it is important to store the product in a special case along with pegs and other fasteners, so that upon arrival at your vacation spot you will not have an unpleasant surprise in the form of a lack of necessary fasteners.

You can find instructions for making a simple tent in the video.

Every lover of outdoor recreation is required to have at least one good tent. But what if good options Are they not available in stores or are they very expensive? In this case, you can read the information on how to sew a tent with your own hands. Knowing all the nuances, you can make a really high-quality design that will not let you down even in bad weather.

It is quite possible to sew a tent yourself, but you need to understand what requirements it must meet. First of all, it should be:

• Reliable and can withstand not only long periods of use, but also a wide variety of external factors: from wind to rain;
• Comfortable. Its size should be based on the number of people who will be in it. The growth of people is also important;
• Not heavy. This is important, especially if it’s not just fishing, which you can go on by car, but a real hike.

Based on the above criteria, the materials for the construction must be dense and waterproof. And it’s absolutely great if they are also light. Examples include:

• Thin tarpaulin;
• Raincoat;
• Percale;
• Rubberized percale;
• Bologna;
• Special tent fabric. This is the most ideal option.

The amount of material directly depends on the shape of the future tent, but the difference is not very big. For example, a standard three-pitched structure for 4 people requires on average 2-3 square meters less than a gable or single-pitched form.

Additional materials will also depend on the type of tent. Minimum set implies the presence of:

• Strong ropes;
• Tape for processing seams;
• Bedding made of waterproof material;
• Needles and threads.

As you can see, the set is quite simple and very affordable. You can find everything you need at your nearest hardware or hardware store.

How to sew a waterproof tent with your own hands

Waterproof - very important criterion, on which the comfort of staying in the tent will depend. You can immediately buy tent fabric that is initially impregnated with a water-repellent agent. But there are a number of measures that can make even ordinary fabric, such as tarpaulin, waterproof. Here are some examples:

• Place the fabric in a solution of 40-50% laundry soap until completely saturated. After that, transfer it to the solution copper sulfate 20%. After a few minutes, the material must be removed and dried thoroughly;
• In 4 liters of warm water put 0.5 kg of soap, rosin in the amount of 450 g and 25 g baking soda. The material is placed in the resulting mixture for about 2 hours. After time has passed, it is taken out and dried;
• Combine water and alum in a ratio of 10 to 4. Add 2 parts of fish glue to the mixture, as well as 1 part of laundry soap. Wring out the fabric soaked in the solution well and rinse using a solution of lead acetate at a concentration of 4%.

All of these methods require the use protective gloves and accuracy. But the simplest method can be considered the use of ordinary film, which, if necessary, can be used to cover the tent and secure it with clothespins.

A simple version of the tent can be made using the following pattern.

The dimensions in the diagram are indicated in centimeters and are calculated for a base perimeter of 150*180 cm. If necessary, they can always be increased while maintaining the overall proportions.

For such a tent you will need at least one riser. You can use a regular ski for this. But if there is a pair available at once, then even better. In this case, it is better to make the riser in the shape of the letter Λ. This is very convenient, especially in poor visibility conditions. Rear wall fixed on guy wires, which is carried out from the highest point on the diagram. If the area is wooded and it is possible to install the structure between two large trees, then you don’t even need to use a riser.

The main steps for sewing a tent consist of the following procedures:

• Sewing a stretcher using a nylon rope between points A and FG;
• Sewing a stretch to points B and C;
• WITH outside Loops are installed at the corners of the base, with which the tent will be attached to pegs. Nylon rope is also suitable for this purpose;
• If desired, you can sew a zipper between the sashes.
• Preparing the base of the structure. To do this, it is necessary to cut a piece of the required size from a durable waterproof, and preferably rubberized, material and sew it with a tarpaulin tent awning.

It is advisable to make holes in the structure for air circulation. The easiest way is to cut the sides of the tent a little and place a holding object between them, for example, an ordinary branch. The edges of the cuts must be trimmed with threads to prevent the fabric from unraveling. The seams can always be reinforced with additional tape. This measure will not only protect the tent from tearing the seams, but also from moisture getting through them.

DIY winter fishing tent

A tent for winter fishing, in addition to the basic requirements, must additionally protect its owner from low temperatures and increased precipitation.

To make a winter tent with your own hands, you can use old skis and an unnecessary cot. Be sure to have suitable fabric for the tent and tube. You can also use ski poles instead. Below is a diagram of a simple single-seat design.

Since the basis of such a tent is skis, you can use this moment to your advantage, for example, moving the structure along the ice from one hole to another.

The manufacturing process is as follows:

1. The tubes, which will serve as the horizontal upper crossbar, are connected to ski poles, which will play the role of vertical racks. For this, tees of suitable diameters are used;
2. After this, the second end of the vertical poles is secured to the skis. A metal plate and a T-shaped tongue attached to the skis will help you do this;
3. From an unnecessary folding bed, you need to remove two tubes bent at the ends. They will connect the finished frame with fishing box. To do this, they must have a latch at one end, and a docking unit at the other;
4. The box with tubes is connected using a copper spring;
5. The awning is secured with ropes. To do this, holes are made in the lower part of the material or a special ready-made metal strip is used. The staples are inserted into the holes and secured to the skis.

In windy conditions the tent may not be stable. To do this, it is necessary to equip it with weights.

Umbrella

“Umbrella” tent design

This is the simplest type of tent and is very easy to set up. This is facilitated by its umbrella design. The main frame is made of duralumin tubes or twigs. They have the required level of rigidity. The top is covered with a tarpaulin or other synthetic fabric. The disadvantage of this type is the low level of vapor permeability.

Frame on arches

It is not very popular among fishermen because it does not have high reliability and stability. Its structure is very simple: it is based on several arc frames, which are made of fiberglass or duralumin. The second option is more durable. Due to this, the shape of the tent can be different. An awning is pulled over the frame from above.

Automatic tent

The basis of this type is a frame made of thin metal rods. They should be flexible enough to allow the tent to be folded compactly. This is the meaning of the name “Automatic”: when the tent is removed from the cover, due to the spring state of the frame, it independently takes the desired shape. The installation procedure usually does not take more than 20-30 seconds.

The disadvantages of this type are the inconvenience of folding the structure, its instability and low resistance to external influences. Therefore, it is best to use it for one-day fishing trips.

DIY children's tent

In order to sew a children's play tent you will need 4 tall wooden blocks, a piece of fabric, a drill, a crossbar and elastic bands. 4 bars act as the base, 2 on each side. Crossing them, a hole is made at the intersection using a drill. A crossbar is installed in the holes, which will connect the two sides.

A small piece of elastic folded in half is sewn onto each corner of the fabric. All that remains is to stretch the finished fabric onto wooden frame. The tent is ready.

Summer and vacation are an excellent combination for a backpacking trip. Hiking, tent, songs and stories around the fire, what could be better? But, of course, it’s worth preparing for and finding out in advance how to make a tent with your own hands.

The presented photographs illustrate the process of cutting and sewing a tourist tent, which can provide shelter for three people. For work, prepare 23 m of raincoat fabric (it is best to give preference to green). The photo below shows the layout of the fabric for cutting, as well as symbols.
The following photo shows the production of parts.

When all the parts are done, you can start assembling DIY tents. The very first to sew the ends and sides together (seam Ш-5 or Ш-2), the bottom will be secured next (Ш-5 or Ш-2), and last will be the awning Ш-1. Sewing the awning will be quite difficult due to its impressive size, which is why it is best to pre-mark the stitch line using chalk. And then do a hand stitch. Bring your imagination to work and use all the possibilities for making pockets, pegs, racks and covers.

The mass of the resulting product will be about 5 kg, if given weight is critical for you, you can reduce it by 2 kg by using nylon fabric for sewing. But keep in mind that it will be more expensive than a raincoat one. To give the tent a more formal look, you can make all seams Sh-1 (sew along the “face”, and then sew keeper tape onto it).

To work with raincoat fabric, use needle No. 120 and thread No. 30; to work with rubberized nylon, use nylon thread K-20 or K-40. This choice This is due to the fact that moisture can accumulate in the places where the seams are laid and the cotton threads will soon literally rot. To combat water condensation, it is recommended to place windows at different heights. For stitching, use an industrial sewing machine class 1022.

Find out more about it, because it is extremely interesting and exciting.