Before you update old chair with a backrest with your own hands, you need to examine the condition of the furniture. Before restoration, the strength of the legs, back and seat is checked. If they are loose, they need to be tightened or re-glued. Subsequent actions will depend on the type of restoration work to be carried out.

Similar articles:

How to update a chair with a backrest

In most cases, old chairs require major repairs. The furniture is cleaned of paint and varnish, and chips, cracks and potholes are repaired. Objects made from solid wood are coated with impregnation or stain so as not to cover the texture of the wood. Furniture is also repainted in other colors.

To update a chair with soft elements, you need to remove the old upholstery and replace the foam. If necessary, new springs are installed in the seat.

Painting a chair

The easiest way to reconstruct wooden objects is to repaint them. The furniture can be made monochromatic, highlight the back, legs or seat in different colors. A pattern is also applied to the furniture.

Features of the reconstruction:

1. Removing old topcoat. The easiest way to remove the paint layer is with a sander. The device must be directed along the grain of the wood. Otherwise, you can ruin the texture. To remove the coating in hard-to-reach places, use coarse sandpaper. Another way to remove old paint and varnish - applying remover. Furniture should be coated with this chemical solution while wearing a respirator and open windows. The peeled top coating is removed with a spatula.
2. Elimination of defects. Potholes and cracks are repaired with wood putty or a homemade mixture based on fine sawdust and PVA glue.
3. Preparing for painting. Before updating the chair, you need to make its surface smooth. Furniture that has been cleared of paint and varnish should be treated with fine-grained sandpaper.
4. Painting. You will need a small foam roller and synthetic brushes different sizes. You can use alkyd paint, compositions on water based, impregnation. The first layer is applied with a roller. This will make the coating more uniform. Subsequent layers are applied with brushes. After repainting, the chair is varnished. Experts recommend using protective compounds that are resistant to mechanical stress.

If you decide to combine several shades in furniture, then you should use the color wheel to select them. Patterns are applied using a stencil. You can also transfer the sketch onto furniture using a carbon copy.

Upholstery of seat and back

Upholstered chairs will take longer to refinish. In this case, you will need to replace the springs and foam.

The fabric for new upholstery must be durable. For backrest and seat you can choose following materials:

1. Tapestry.
2. Matting.
3. Jacquard.
4. Artificial leather.

For reupholstery you will need:

• Screwdriver.
• Pliers.
• Roulette.
• Scissors.
• Furniture stapler.

How to reconstruct wooden chair with your own hands:

1. Disassembling furniture. First you need to disconnect the staples to which the fabric is attached from the frame. They are pryed off with a flat screwdriver. Then remove the old upholstery and disassemble the seat. If the frame of the furniture has been glued, then it is worth disconnecting the legs. They are cleaned and then remounted to the seat base. This is done to increase the stability of the stool.
2. Replacement of old fittings. Springs need to be replaced if they are rusty and begin to come off. They can be purchased in stores with furniture fittings. A structure made of flooring, felt and batting is pulled over the springs.
3. Constructing a pattern for the seat and back. You can duplicate old upholstery. It is disconnected and then placed on paper. The details are outlined and cut out. When creating a pattern for furniture without upholstery, paper is placed over the back and seat, and then their boundaries are marked with a pencil. When cutting out parts, you should take into account the thickness of the foam rubber and remember the allowances.
4. Replacement of upholstery. First, the backrest is formed. The fabric is secured with a stapler. The direction of movement is from the central part to the corners. Then foam rubber is glued to the back and the front part is attached. After this, the seat is retightened. Foam rubber and padding polyester are attached to it, and then covered with fabric.

Upgrade an old chair with a cover

You can also update old chairs using covers. The easiest way is to make a design with a “skirt” covering bottom part furniture. The removable cover can be sewn from 5 parts. When cutting them out, add 1.5 cm to the allowances, and 3 mm to the loose fit. Sewing will require about 2 m of fabric.

Pattern details:

• Seat. Consists of 1 piece, fully matches the parameters of a similar piece of furniture.
• Back. Sewn from 3 parts. The back part consists of 2 rectangles, between which a hidden zipper is sewn. At the bottom these parts are hemmed, making a double hem. The front is folded back and sewn to the top of the back.
• Bottom. It is cut out in the form of a long strip. It is sewn to the seat and bottom of the back. The part can completely cover the legs or be smaller in height. Its lower edge is finished with a hem seam.

Restoration of chairs in the 21st century has become popular business. Many people, when furnishing their apartments, strive to fill them with antiques. But not everyone can afford to buy antiques. And therefore, the owners prefer to update the old furniture that they inherited and, in memory of the past, was not thrown into a landfill.

Unpresentable-looking interior items, which have been collecting dust in dachas and attics for a long time, are handed over to professionals in order to then decorate the rooms of their home with furniture that has found a second life. But in order to renew the dilapidated upholstered part, back and legs, it is not necessary to turn to the craftsmen, because the owners can do this themselves.

Similar articles:

How to update a chair?

Restoring old chairs with your own hands is an interesting and easy task. Knowing some of its subtleties and armed necessary tools and materials, in just a few hours you can turn a shabby and faded object into a bright and unique element of the interior own home, cottages or apartments.

The main problems with all solid wood chairs are:

• peeling paint and varnish;
• holes made by small insects;
• scratches and cracks;
• drying out of parts, as a result of which the object began to wobble.

All these problems can be easily eliminated by coating the damage with wood glue and painting special compounds and varnishing each wooden element.

To restore a chair consisting not only of hard, but also of soft parts (seat and back), the fabric or leather material of which fades and becomes damaged over time, you should replace the filler in the leaky element and decorate the upholstery with fashionable fabric.

Methods of restoration by decorating a chair

To give an antique piece of furniture a fresh and attractive look, the following methods are used:

• Applying several layers of varnish or paint to wooden elements.
• Application of decoupage technique.
• Decorating a piece of furniture with fabric material.
• Frame repair and upholstery reupholstery.

Restoring an old chair with your own hands should be done carefully and without haste, so as not to damage or break it.

Decor using fabric

Among the types of restoration work carried out on furniture, decor using fabric is often found. It looks unusual and can be used for both temporary and permanent transformation of the chair.

This method consists of decorating parts of a wood product with ribbons and satin stripes of one or more colors. You can either simply wrap them around individual elements, or make luxurious flowers and butterflies out of fabric, tie bows and decorate the back of the item with them. This decor is often used to decorate a festive event (themed party, birthday, New Year's Eve).

DIY chair restoration can be done using jute rope. For this purpose, you need to remove the soft parts of the product, and instead wind a rope around the frame, weaving it with a mesh or using the macrame technique.

Before decorating old furniture with fabrics, it should be updated (repaired and painted), since the material will not completely cover the entire product. An interesting option Updating a piece of furniture will involve sewing a cover for it. You can make several versions of the product and change them periodically.

Decoupage technique

Decoupage is the decoration of interior items with ornaments or pictures cut from special napkins, wallpaper or paper and pasted onto a previously prepared surface.

To transform an antique chair using decoupage, we restore its solid parts step by step:

1. All is removed from the tree old layer paint or varnish.
2. The top of the product is leveled with putty.
3. A primer is applied to the elements of the object.
4. Furniture is painted with a composition of a suitable shade. For the decoupage technique, it is better to make the wooden surface lighter than it was (it is worth painting the product white or cream, then the design will look more impressive).
5. The desired picture is cut out of paper and glued to the area to be decorated.
6. The pasted pattern is painted over the edges with a translucent composition.
7. The entire product is top coated with acrylic varnish.

The decoupage technique is not difficult. But this work takes more time than other methods of decoration, because one layer of coating (primer, paint, etc.) must dry completely, and then another layer can be applied to it.

Chair restoration by staining

The fastest way to restore a wooden chair is by painting it. Before this, the surface of the product must be cleaned of the previous coating. sandpaper. When sanding parts of an interior item, you need to move the sandpaper in the direction of the wood fibers so that they do not stand upright. Dust generated during this process should be removed with a dry cloth, otherwise the paint will lie unevenly. The next step is to coat the surface with a primer. After it has dried, you can start painting.

The product is covered with stain, oil, enamel, acrylic and chalk paints. Using a brush, they are applied in several layers to the hard parts of the chair with the back so that the compositions lie evenly. If you want the interior item to shine, then apply varnish over the paint.

Restoration by reupholstery

For both elaborate Viennese and simple furniture, upholstery of the soft part is often used. For fresh upholstery, you can use the most different materials: microfiber, jacquard, flock, chenille, etc. The main condition is that the fabric for restoring the chair should be dense to the touch, durable, easy to clean, wear-resistant and not fade in the sun.

To reupholstery, you need to remove old material. It will be useful as a template for a pattern. Place the seat on the foam rubber, trace the base with a felt-tip pen or marker, and cut it out along the drawn line. Place faded or torn fabric on a dense material and perform the same action as with foam rubber.

If you decide to restore an old chair yourself, turning a solid wooden object interior in such a way that it is comfortable to sit on, then for the upholstery, select an amount of material that is 5-6 cm larger than the size of the foam rubber. The allowance is needed to tuck the fabric under the seat. When the material is cut, lay it on the foam rubber, slightly stretching it, and even out all the folds. Then secure the upholstery to the soft element using staples.

Step-by-step instructions for restoring stool

Proper restoration of a chair, performed at home, includes the following operations:

1. Prepare the tools and materials necessary for the work.
2. Clean and wash all parts of the product from dust and dirt.
3. Dry the piece of furniture thoroughly.
4. Disassemble the product.
5. Repair wooden elements: legs and frame.
6. Sand hard parts.
7. Assemble the frame.
8. Coat the wood with paints and varnishes.
9. Decorate with fabric, ribbons, jute rope.

If you need to turn a hard chair into a comfortable one, then while the wooden parts are drying, make a comfortable seat or reupholster it. Then the soft elements of the furniture are connected to its frame.

Over time, furniture loses its appearance: the upholstery wears out, corners get knocked out, scratches and chips form, etc. But such unpleasant moments are not a reason to purchase new interior elements. After all, external damage can often be repaired on our own.

So, it is possible to restore chairs with your own hands in five steps, which will be discussed in this article in a photo master class. Before you start upgrading your chairs yourself, you will need some tools: a hammer, a Phillips screwdriver, sanding paper of various grits (from 80 to 220), a surface sander, wood paint, wax, primer, a brush or a spray bottle.

First stage: remove the upholstery of the chair

Separate the upholstery and seat from the body of the old chair with your own hands using a screwdriver or a nail puller, then gently tap the seat with a hammer - it will come out of the base of the frame. If there is no upholstery on the chair, you can move on to the second stage of restoration.

Stage two: preparation for painting

At this stage of restoring old chairs, it is necessary to very well clean off the previous layers of paint or varnish on the chair. To do this, use sanding paper. The grain size will depend on the number of layers of coating on the elements of your workpiece. This is the longest and most difficult process in restoring furniture with your own hands, however, with such actions you will perfectly prepare the furniture for further painting. Of course, if you use a grinder, the job will move much faster, but there will be a lot of dust.

Third stage: primer and painting

The third stage of renovation involves priming the surface of the chair, since wood has a peculiar porous structure, which means wax varnish or wood paint will not last long and will not work well. If you want to paint the chair in different colors, first open it up with a transparent primer to hide uneven surfaces and cavities. When using a spray bottle you will save more time.

The fourth stage of our master class on restoration

The penultimate stage is not particularly difficult. When your workpiece is dry and ready for further use, sand the primer again, then open the surface wax varnish to strengthen subsequent layers of paint. Apply the balm with a rag and then polish it again with a special brush.

Fifth stage: painting old chairs without decoupage

The last step in restoring chairs with your own hands is painting. To properly apply paint, you need to paint the chair in one layer and leave it to dry for about a day. After the chair has dried, polish the paint, paint it with another layer, again leave the workpiece to dry and polish the paint layer. If you really want, you can apply a third layer of paint or do decoupage yourself, but it’s up to you.

Painting the surface of a chair completely changes its design. The paint should be chosen in accordance with the colors of the room's interior. The most successful and universal solutions are shades of black, beige, white and light gray. Be sure to consider any upholstery or cover options, as these components should be different from the overall colors of your chair.

If the wooden chair was not upholstered, you can reupholster your DIY chair yourself, or use cushions and covers to make the seat softer.

Preparation

In order to begin the restoration, you will need:

• Roller
• medium grit sandpaper
• fine grit sandpaper
• tassel (flute)
• primer
• paint on acrylic base

Before you start renovating your chair, you should carry out special preparatory work.

The first step is to carefully remove the upholstery. These manipulations require caution.

It is very important that the surface is not damaged. After this, you need to remove the nails (regular pliers or a nail puller will help with this).

To do this, choose any of the methods you like: using broken glass, sandpaper or a special sanding machine.

At home, the second method is more suitable.

It is better to purchase sandpaper for removing varnish with medium grains. Fine-grained in this case will do a disservice.

Under such influence, the coating softens and comes off well. To make the job much easier, you can take a block of wood that is normal to hold in your hand and wrap sandpaper around it. To make it more convenient, it can be glued.

After the varnish has been removed from the surface of the chair, you can move on to the next stage. In this case, use a primer that is intended for wooden surfaces.

It is necessary to carefully coat all parts of the chair with this composition. Once the primer is completely dry, you can begin painting the furniture. To do this you will need acrylic based paint.

For such work, this composition is predominantly chosen because it meets many requirements:

• Dries quite quickly
• has virtually no odor
• able to withstand any mechanical damage

In addition, acrylic paint has rich, bright shades.

Artificial aging of stool

To carry out such work you will need:

• Candle made from paraffin
• special patina, which is sold in stores selling finishing materials
• acrylic based paints
• a sheet of sandpaper and more

If you need to make a decorative stool or an old unnecessary stool in the Provence style, then this update option is perfect.

To create a worn effect on the surface of this furniture, you can use acrylic-based dyes of grey-green, dark brown or black.

They are applied to the parts of the chair in some areas (without painting it completely) and wait until it dries.

At the next stage, rub the painted areas with a paraffin-based candle, and paint such areas with contrasting paint.

For the Provence style, a blue or white shade is good. After this, you can take sandpaper and go over all areas. Medium grain is best suited for this purpose.

Using this method, the layer of paint that is on top is very well removed. The result will be spectacular abrasions, giving the chair an antique look.

There is another way to decorate a chair with your own hands, a master class of which is presented below. All you need is one-step craquelure. You can find it in stores selling handicraft supplies.

First you need to determine in which areas of the chair the cracks will be located. After this, you need to give the surface of the furniture a dark shade.

To do this, paint of the same color is applied to it with gentle movements. After the first layer is completely dry, you can begin applying one-step craquelure. This is also done in one step.

Craquelure does not need two layers. After this, you can apply contrasting paint (colors are selected as in the first option). You should try to make strokes so that they go in the same direction.

You cannot return to the area that has already been painted. In this case, you can accidentally cover up the cracks, and the desired effect in the form of craquelure may not work. As for how the cracks will be located, this will depend on the direction in which the brush moves.

Strokes can be applied both vertically and horizontally. A very interesting crackle effect can be achieved if you move the brush as if repeating the outline of a semicircle. In addition, to achieve a good result, you can alternate the direction.

The effect of antiquity can be achieved by using antique patina for tinting. This composition is used to coat convex surfaces, darken the boundaries of the chair, as well as the existing recesses in the motif of the design on the chair, if any.

The patina is applied using a regular foam sponge, allowed to sit for about 5 or 10 minutes and the excess removed. It is convenient to do this with a damp cloth.

If there is no patina in the house, then it can be successfully replaced with regular paints on acrylic base. For example, experienced restorers know that a black tint in combination with burnt umber gives the appearance of antique bitumen. As for the parts of the chair that are made of metal, they can be painted blue or green.

Decorating with fabric

Usually the frame of the chair remains in the same state and does not change in any way over time.

As for the upholstery of the back and seat, they lose their quality and look shabby.

As a rule, a set of dining room chairs consists of 6 chairs.

Of course, getting rid of them can be very expensive for any family, so owners very often look for a way to replace such a piece of furniture.

Since you can hardly find chairs alone in stores, there is another way - to change the upholstery.

If such furniture still has a normal frame and you have the most ordinary tools at home, then you can try to decorate it.

Selecting fabric for upholstery

First of all, you need to decide what fabric will be used to cover the seat and back of the chair. To do this correctly, you should remember that, first of all, textiles must have good technological characteristics. These are stretchability, strength and abrasion resistance.

And after that, you can pay attention to the attractiveness of such textiles from an aesthetic point of view. When choosing fabric for upholstery according to the last characteristic, you should look at how it will combine with other decorative elements and with the entire interior as a whole:

• Tapestry for upholstery. It contains a large percentage of cotton interspersed with synthetic fibers. It is this addition that makes this textile much more wear-resistant and durable. As for the direction in which the fibers of such upholstery go, it does not change. This means that the design or pattern can only be placed horizontally or vertically (depending on the fabric). This feature must be taken into account when choosing upholstery material.
• Furniture silk. This type of fabric has gained great popularity as furniture upholstery. Chairs decorated with such a textile covering will look expensive and elegant. This material is almost entirely made from unnatural synthetic fibers, so it has good wear resistance. Since such textiles look very festive and elegant, they are most often used for the restoration of “Viennese” chairs. They look very elegant and in themselves are a good decoration for the dining room, as well as other rooms.
• Jacquard. This material has a special charm. It is very elegant, but is rarely used to decorate ordinary furniture. Restorers use it to reupholster antique chairs. Its unique aesthetic and technological characteristics help to use this material for decorating exclusive furniture.

In addition to the above fabrics for upholstering chairs, other materials (microfiber, arpatek, etc.) are currently widely used. Such textiles allow you to use furniture every day due to its good wear resistance.

In addition, the surface of such upholstery fabrics lends itself well to washing and cleaning with any chemicals intended for these purposes.

Experts advise choosing textiles for restoration that have good durability. You also need to pay attention to the aesthetic appearance of the material, because it is very important that the upholstery is not only of high quality, but also brings harmony to the room.

Decoration process

First of all, you need to start separating all the parts that secure the upholstery. After this, all fixation areas in the chair structure, as well as the grooves, should be tested.

This is necessary in order to extend the life of such furniture. Using a sheet of medium-grain sandpaper, it is necessary to sand the entire surface of the chair in order to get rid of roughness.

To make the seat soft, place a piece of foam rubber under the base of the structure. It is cut to size.

As for the thickness of such material, in this case it is selected based on your own preferences. The dimensions of the foam rubber must exactly match the dimensions of the seat frame.

After this procedure has been carried out, the batting should be cut out, leaving an edge allowance of 5 cm on each side. You need to cover the foam rubber with a sheet of this material.

Those areas that remain are fixed using a special furniture stapler. Excess material is cut off with scissors or a knife.

Basic principles

In order to make it work interesting product, you should familiarize yourself with the basic principles of decor:

• We should not forget that before making markings on textiles for upholstery, it is necessary to pay attention to the exact direction in which the pattern on the fabric will go. The area that is suitable is outlined with chalk or a simple pencil. The decorative material does not need to be over-stretched. The appearance of unevenness and folds should be avoided. As for the connection areas, they must be fixed using a furniture stapler in several rows (usually this is done in two rows). The remaining fabric is carefully trimmed.
• To get a new chair back, you can choose any option: decorate the old one if it is not yet very worn out or create a completely new one using a plywood sheet. The upper part is finished in exactly the same way as the seat. As for the pattern for this part of the chair, it is chosen in accordance with the lower place. The pattern should be harmoniously combined or repeated in both places.
• If any irregularities, seams or kinks appear during restoration work, they can be easily masked using tape. It should be exactly the same size (or slightly larger) as all the resulting minor defects. The work is done using transparent wood glue, which holds all the parts of the chair together well and dries within a short time. This type of decoration with braid is especially relevant if, after furniture restoration, screws or paper clips have appeared that cannot be hidden in the usual way.
• Once the carpentry glue has dried, you can begin to assemble the structure. In order for the chair to look like new, you need to pay attention not only to replacing the upholstery on the seat and back, but also to other details of such furniture. To give the final touch, the legs of the stool are coated with a colorless varnish that will protect them from various damages.
• In order for such a product to become stable and serve as an interior decoration for a long time, all elements on the chair should be well strengthened using special metal corners.

In addition to the methods listed, you can also use the simplest one - regular staining of the chair. This method will help give the furniture newness and effectiveness.

What do you need to make a chair decor with your own hands, the step-by-step instructions for which are presented above? Before starting work, you should pay attention to the fact that restoration work is carried out in order to extend the service life of this furniture model.

Therefore, it is advisable not only to replace the seat and backrest, but also to strengthen the legs and other parts of the chair. Only in this case will the product look no worse than from the catalogs of famous furniture stores, and besides, it will serve well long service.

The video shows a master class on decorating chairs from Mekhedova:

Noticed a mistake? Select it and press Ctrl+Enter to let us know.

Read also:

• 
• 

  How to decorate a closet with your own hands: interesting ideas from…

• 

  What colors go with gray in the interior: how...

• 

  Combination of green with other colors: options...

• 

  DIY interior items: inexpensive way…

• 

  How to paint old furniture or give new life to...

• Categories

Interior

• Related Posts
• Author

Master class on restoring chairs with your own hands

At the beginning of furniture restoration work, it is necessary to choose a type that will make the old chair new. If the wooden elements have become very loose, cracks have appeared on them, and the upholstery has become fairly worn out over time, then to update such a chair, a detailed and thorough restoration will be required with its complete or partial disassembly. If over time the chair has not suffered much damage: the fabric has become slightly frayed, the varnish has peeled off and the paint has faded, then there will be no need to disassemble the item itself. The simplest and economical look restoration means reupholstering chairs with your own hands. Next, let's look at each type of update in more detail:

Comprehensive restoration of chairs

When working on a comprehensive restoration of chairs, the following equipment will be needed:

• Furniture filler. Such a material could be, for example, foam rubber.
• Special stapler and staples for furniture.
• Varnish and paints, as well as stain.
• Brushes of different hardness, width and shape.
• A sheet of plywood, for new elements of chairs, if the previous ones have completely become unusable.
• Furniture glue.
• Metal clamps.
• Furniture tapestry, with colors that will organically fit into new interior.
• Sander.
• Wooden mallet.
• Screwdriver.
• Drill.
• Self-tapping screws.

You also need to take into account that restoration work will take approximately 5 – 7 days. Part of the time will be spent drying finished product after gluing and painting.

Read on the topic: HOW TO UPDATE OLD KITCHEN FURNITURE WITH YOUR OWN HANDS? BEFORE AND AFTER PHOTOS

The order and stages of restoration work

First of all, it is necessary to prepare the chair for restoration work. Clean all surfaces from dust and dirt, and remove grease stains, if any. To do this, you can use any soap solution and rags or brushes. The main task in this stage is speed. Wood does not like prolonged contact with water and chemical solutions.

After the chair is completely dry, it needs to be disassembled into parts. This must be done as carefully as possible so as not to spoil any individual elements.

When all parts are separated, they must be carefully examined for defects. If there are cracks, they will need to be glued. Only after the glue has completely dried can you start sanding all the parts using sandpaper.

Read on the topic: RESTORATION OF OLD DOORS WITH YOUR OWN HANDS. MK WITH PHOTO BEFORE AND AFTER

During the assembly of finished parts in single design Carefully lubricate all joints with glue. When the chair is assembled, you need to wipe it from dust and get rid of excess glue. Next, until it dries completely, the finished chair should be left for a couple of days, after loading it with something heavy.

Do-it-yourself chair reupholstery: master class

• We remove all damaged parts - upholstery and filling.
• We cut out the exact shape of the new seat and back from a sheet of plywood.
• We are preparing new upholstery and filling.
• Next we put new fabric on the table, put the filler on top and the last plywood. The fabric is stretched to the plywood and secured with a stapler.
• At the end, when all the steps are completed, a layer of stain and varnish is applied to the chair, left for a while to dry completely, and the seat and back are mounted to the chair.

After looking at the before and after photos of restoring chairs with your own hands, you will be convinced that this The best decision inexpensively and tastefully update your old Soviet furniture. After this, it will be able to serve you for many more years, delighting you and delighting your guests every day.

See also video: DIY chair restoration master class

Recommendations on how to update furniture with your own hands step by step

The biggest problem with any wooden product is the violation of the integrity of the outer layer (paint, enamel). These damages can be easily removed using special furniture wax: transparent or colored. It is quite simple to use: heat it up and rub it into the surface using small spatulas.

But, in case of structural damage, deep scratches and chips, this method will not work. A more fundamental approach is needed to how to update furniture with your own hands.

The procedure is carried out in several stages:

Disassembly and replacement of fasteners

We carry out a complete disassembly, checking the condition of the fasteners. Then we replace them with new ones (it is recommended to get rid of all the nails and use self-tapping screws instead). Typically, at this stage it is quite enough to use a screwdriver, but sometimes a hexagon or an adjustable wrench may be required.

Getting rid of old coating

In order to remove paint from furniture, we apply a special solvent to it. After an hour, each element must be rinsed with water to completely remove all residues. After this, all the parts need to be dried. Proper restoration of furniture with your own hands with a photo should help to completely restore the previous appearance of the products.

Putty

We dilute the purchased powder in the volume of water indicated on the package and apply the mixture to cracks and chips with a small rubber spatula. After each stroke, you need to let the layer dry and only then apply the next one. To make the surface smooth, use sandpaper. After processing, all elements can be assembled together.

Painting

It is better to use acrylic for furniture. It not only firmly attaches to the surface, but also protects the structure of the wood. It is most convenient to use a sponge for application: it will allow you to completely cover even the smallest parts, and the paint will penetrate deeper. For maximum effect, apply 3-4 layers and let each layer dry.

Varnishing

In order to give the furniture a finished look, it is necessary to coat it with varnish. It can be matte, glossy and silky. In this matter, it all depends on personal preference. It is best to use products in the form of sprays - they are easily applied in an even layer.

After applying the varnish to the surface, you need to let it dry, and your furniture is ready for a new life cycle.

Step-by-step do-it-yourself furniture restoration with photos and instructions

If it is necessary to replace soft interior elements, you can turn to a technique such as restoration. After all, the principle of action is somewhat different:

1) Disassembly. This step may require a screwdriver, a hex wrench, and an adjustable wrench. The first step is always to remove the overhead elements: poufs, sides, back, seats, etc. Often their fastening elements are located at the bottom of the furniture. If the element is folding, you must first remove its mobile part.

2) Removal old upholstery. After disassembly, all elements must be removed from the upholstery material. Often it is attached using staples, so to carry out this step you will need either a flat-head screwdriver or a special anti-staple gun. You need to try not to damage the fabric. After all, in the future it can be used as a sample. To do this, you need do-it-yourself furniture restoration with photos. This will make it easier to compare the results and what happened before

3) Check and replace padding and elastic elements. If the padding material has lost its properties (sagged, compressed), it is necessary to update it, but without outside help from a specialist it is quite difficult to do this. After the foam rubber there are elastic elements: either springs, or mesh or belts. If they sag or become overstretched, they should also be replaced.

4) Preparation of patterns. In order to accurately prepare the upholstery for upholstered furniture, you need to use the old covering. To do this, you need to completely straighten the new fabric and clamp it at the edges with something heavy. Lay the old upholstery on top and use a pencil or chalk to outline it along the contour, taking into account small allowances (2-3 cm).

5) Fastening parts and covering them. How to update furniture with your own hands, preserving correct form all upholstery elements? It all depends on design features models. But, if all the preparatory work for making patterns was done correctly, then there will be no problems. To secure the new material, you will need a special stapler and several people to help fix and tension the fabric. If there are complex decorative elements, it is better to contact upholstery specialists. But do-it-yourself furniture restoration with photos can also be of high quality

6) Layout of components. It is better to assemble upholstered furniture in its original state using a photograph prepared before disassembly.

Thus, you can give your upholstered furniture an updated appearance without significant costs. This requires a minimum of tools and focus on the process.

Chair reupholstery. Let's transform the interior!

What good quality No matter the furniture, it will still fall into disrepair. But how sad it is to part with your favorite soft chairs! After all, they are comfortable and stable, but the upholstery lets them down. You shouldn’t throw your furniture in the trash; it’s better to give it a second life. Reupholstering a chair is a very exciting and uncomplicated process. A little effort and patience - and your interior will be transformed, and your budget will not suffer from the purchase of new furniture. Show your imagination and design skills - and your family and friends will be surprised and kindly envy such chairs!

Out with the old!

Reupholstering a chair will go like clockwork if you prepare everything you need and stock up good mood. First, carefully inspect the frame for damage and scratches. If there are any, they can be eliminated using wood putty and varnish. You can paint the frame to match the color of the upholstery, it will turn out original and stylish. Such unusual chairs in bright colors can decorate both a children's room and a living room. Select the fabric and accessories, and you can safely get to work.

Dismantling

All old soft elements of the stool must be carefully removed. Arm yourself with a nail puller, scissors, a hammer, and a knife. All these tools will help you remove fabric and filling without any problems. First of all, remove the seat, being careful not to damage the wooden structure. Pry the nails with a nail puller and pull up. Now separate the fabric from the padding to make a pattern. This way, you definitely won’t make a mistake with the size, and reupholstering the chair with your own hands will go like clockwork.

Be sure to remove all springs by cutting the twine holding them, but only if they are severely worn or damaged. Typically springs last for several decades. If they are in satisfactory condition, simply cover the springs with a piece of burlap and secure with an industrial stapler.

If the springs still had to be removed, it was the turn of the old nails. All that remains of the chair should be the base and the plywood or lattice on the seat. Repairing and reupholstering chairs is done in order to save money, so ordinary foam rubber can serve as a sealant.

Do the same with the back of the chair. Remove all soft materials without damaging the fabric.

Noble tree

If you properly care for wooden furniture, it will serve you faithfully for a long time. Tighten all bolts wooden frame, and you can start painting. The varnish is perfect for any type of wood. Cover all elements with two layers of varnish or acrylic paint. If desired, the legs can be decorated using the decoupage technique or applied with a design using a stencil. There are special waterproof stickers for furniture on sale. You can also decorate chairs with them, but then it is better to choose a plain fabric. It will turn out original and unusual.

Soft seat

Before going to the store to buy fabric, take measurements of the chair and calculate the number of meters of material. Reupholstering kitchen chairs requires special attention. Their seats deteriorate faster, as they are used constantly and are subject to soot, grease, and dirt. Jacquard, tapestry, and chenille work well. Fabrics are not that cheap, so you shouldn’t buy too much.

To make the pattern, take a piece of construction paper and trace around the old fabric from the seat. Now transfer the pattern to the new material and cut. We do the same with foam rubber. When all the blanks are ready, you can begin to assemble the structure. Chair reupholstery is in full swing! Using universal glue, we attach the foam rubber to the base (usually plywood). After the glue has dried, we apply the fabric and begin to fold the edges inward, sealing the seat.

We stretch the fabric tightly and fasten it to the plywood with a stapler. Now we screw our piece of furniture art to the frame and enjoy the work! The backs and backs need to be covered with fabric so that the chair looks neat. Fold the edges evenly, making sure there are no folds or bends.

Instead of fabric, you can use a leather substitute. The chairs will look presentable and strict. The edges can be trimmed with furniture nails with shiny heads. Create stylish things with your own hands!

Skillful fingers

Creating comfort and beauty in your home is a great pleasure. If you have patience and feel a creative impulse, your home will be transformed beyond recognition. Spare no effort, show your imagination, and everything will work out! Reupholstering a chair can be a fun activity for the whole family. You will get great pleasure, and even save your family budget!

How to reupholster chairs with your own hands - chair reupholstery - Comfort

Knowing how to reupholster chairs yourself, you can restore your furniture and get attractive and unique pieces that will delight you and your guests with brand new upholstery.

Restoring chairs at home is a fairly simple process that requires updating the frame and upholstered parts. All you need is a set of ordinary tools, paint, foam rubber and new upholstery fabric.

Stage 1 – preparation

To give your chair a new look, you will need the following tools and materials.

Prepare your tools:

• Screwdrivers
• Bolt wrench
• Pliers and narrow nose pliers
• Furniture stapler
• Scissors
• Sandpaper or sander
• Brushes

You will also need acrylic paint or stain and varnish for the restoration of wooden parts, glue. Prepare materials to choose from:

Prepare 2 pieces of rough fabric: for the layer between the filler and the seat and between the seat and the frame. Use professional foam rubber for furniture, its density is 22 - 25 kg/m.

Tip: Save the integrity of the old upholstery so that you can use it to create a pattern using new fabric.

Do-it-yourself restoration of wooden chairs begins with disassembling the structure. Unscrew the bolts and separate the individual parts of the chair, remove the old upholstery and filling.

Stage 2 – frame restoration

If you have to restore a Viennese chair with your own hands, do it like any other - disassemble the structure and start by updating the frame. To do this, use sandpaper to sand the surface, removing the remnants of the old coating. The surface should be sanded with sandpaper No. 80 and No. 100, and to facilitate the process it is better to use grinder.

Tip: using stain, you can tint a chair to look like natural wood: beech, oak, walnut, mahogany.

Stage 3 - replacing filling and upholstery

The advantage of reupholstering old home chairs with your own hands is that you can give them a look that is in harmony with the style of the interior, as well as bring your creative ideas to life. To do this, select furniture fabric desired texture and shade, then feel free to start reupholstering.

Tip: to more securely fasten the layers of the seat, coat them around the perimeter with glue and place a load on the finished chair for 2 days, for example, a bucket of water.

The final stage is assembling the finished chair

Connect the components, replacing old fasteners with new bolts if necessary.

Design ideas

Do-it-yourself upholstery of a chair at home is not only a need to update the appearance of furniture, but also an opportunity for creativity. As new upholstery, you can use not only specially purchased furniture material.

For this purpose, you can use self-embroidered compositions, Pavlovo Posad scarves, denim, weave leather belts and other materials of original texture and with a variety of patterns.

If you have artistic skills, the legs and back can be painted with patterns, “aged”, and decorated with decorative elements, also created by yourself. To finish the edge of the seat, you can upholster it with contrasting colored braid, trim it with beads or large buttons. You can even sew new case for the back and give the chair the appearance of an armchair.

Self-upholstery chair will give you several hours of inspired creativity and a lot of pleasure, and will also allow you to update the interior to your taste without going broke family budget and buying new furniture. Chairs with unusual upholstery attract the attention of guests and delight the whole family!

How to reupholster a chair

Preparatory stage

Before starting work, prepare materials and tools. This is where the question arises of what fabric will be used for the new upholstery and filling. Foam rubber is suitable for filler. The thickness must be at least 40 mm. Recommended density is about 40 kg/m³. As a last resort, you can take padding polyester or batting, but they are short-lived, wrinkled, and deformed.

Typically, chair upholstery is done with fabrics that can hold their shape. The second requirement is the ability to clean the surface with a brush and soapy water. The best option jacquard, tapestry, flock, chenille are considered. To determine the size of the cut to buy, measure the seat and add 15–20 cm to allowances on each side.

In addition to the fabric and filler, prepare the following:

• cardboard for patterns;
• furniture stapler;
• screwdriver, pliers;
• measuring tape, ruler;
• scissors;
• pencil, crayons.

Removing old upholstery

Chair reupholstery begins with the removal of worn-out materials. To avoid problems with assembly after installing new upholstery material, you need to remember how the chair is disassembled. First, they turn it over and inspect it. The existing bolts are unscrewed, other fasteners are pulled out with pliers. There may be staples or clamps. All parts made of wood or metal are put aside, and at the end of the work they are used during assembly.

Frame inspection

First you need to put the frame in order, and only then will it be possible to reupholster the old chairs. After all, even the most beautiful upholstery won't give furniture new life, if the chair does not stand firmly on its feet. During the inspection, loose nodes and weak connections are identified. They are being pulled up. If necessary, replace the fittings. If there are cracks, they are glued and the area is tightened with clamps.

If the wooden base is scratched or has an unpresentable appearance, it is cleaned of the old coating, and then decorated with a new layer of paint or varnish. The plywood base for the seat is made smooth and clean.

Pattern of parts

A piece of cardboard is used for the pattern. A plywood seat base is placed on it and outlined. This will be a template for the filler pattern. To get a pattern for cutting upholstery fabric, you will need to add 10 cm to the hem on each side of the seat shape.

You can cut the fabric with either scissors or a stationery knife. If the fabric has a pronounced pattern, you need to pay attention to the placement of the patterns/stripes so that it will look good on the chair.

Reupholstering an old chair

First, the filler is installed and glued. Then the resulting blank is placed on the upholstery fabric, which is spread face down. The soft side of the workpiece should lie on the fabric. The fabric is folded under tension and secured with a stapler. You can see how to reupholster a chair in a video or photo. Then it will become more clear how to carry out the work at this stage. If there are large unfixed folds between the staples, they are nailed down with small nails.

When the material is secured, it is trimmed so that the long edges do not hang down. Next, they begin to install the seat in place and fasten it.

If the seat had springs, they must be reattached, distributed evenly over the entire surface. After all, the springs themselves do not wear out. In addition to the upholstery fabric, you will also need a layer of burlap, which will help withstand the mechanical impact of the metal.

Chair back repair

The back of the chair is reupholstered using a similar scheme.

• Dismantling.
• Making a pattern.
• Cut out the materials.
• Filling and upholstery fastening.
• Installing parts in their original place.

Anyone can repair a chair using the material offered in the master class. As a result, old furniture will have new opportunities to please its owners.

Source http://mainavi.ru/dizain/mebel/peretyazhka-stula-svoimi-rukami/

Russia, Moscow region, Moscow +79041000555

DIY chair restoration: design ideas, master classes

Takes ~5 minutes to read

Save

If you have old chairs in your home, there is no need to throw them away. They can still serve you for several years if they are properly restored. You can do this yourself. This way you will save your money and have an interesting time.

In this article we will tell you how to restore old chairs with your own hands, and also consider ideas for upholstering them.

How to restore an old chair

Required tools:

• Scissors.
• Paint brushes.
• Polishing machine. If you don’t have one, then you can get by with simple sandpaper.
• Putty knife.
• Electric drill and drill bit.
• Face mask.
• Copy paper.
• Power saw.
• Paper.
• Pencil.

Save

Restoration stages:

• First you need to get rid of those parts of the stool that cannot be restored. For example, use a jigsaw to remove slats and loose pieces on the backrest.
• Now places a thick sheet of plywood on the seat. Using a pencil, we mark the intersection with the vertices of the back, since the sheet can be very large. Using carbon paper, transfer the pattern onto the workpiece. To easily cut out patterns, drill holes in the plywood.
• A sheet of plywood must be secured between boards or on a workbench. Using a power saw, make the shape of the back of the stool. Place the finished part in place. Using a pencil, mark the places where the screws should be placed to hold the wooden planks and plywood. Using a drill, make holes narrower than the screws themselves. Insert the screws and seal the holes with putty.
• Give it time to dry. After which everything needs to be leveled. Sandpaper is used for this.
• If you need to paint a chair, you first need to apply a layer of acrylic primer to the surface. Wait until it dries. When processing, special attention must be paid to the back of the product, since all edges and lines must be processed carefully. Now you can paint. After the paint has dried, the chair is varnished.

Seat trim

There are times when restoration of the stool seat is necessary. To do this you will need the following materials and tools:

• Stapler for furniture.
• Staples.
• Screwdriver.
• Foam rubber 5 cm thick or 2 pieces of fabric 2–3 cm thick.
• Thick fabric for seat upholstery and backing fabric.

Save

So, how to reupholster the seat of a wooden stool:

• We take out the seat and upholstery. We don't throw away the base.
• Turn the chair over and remove the fastenings that hold the seat in place.
• We remove the factory brackets and take out the frame with the spring. There will be filler on it, or rather, the remains of it. We remove all this.
• Cut out a rectangle. The upholstery should extend beyond the edges of the seat by 6–8 cm.
• We place a backing made of thick fabric on the springs. It needs to be fixed with a stapler to a wooden frame.
• We put the filler. Acceptable thickness is 4–5 cm.
• Making upholstery for a chair. It is best to perform this action together. For upholstery, linen, leather or textile materials are used.

DIY restoration of old chairs

The process of restoring an old lacquered stool is slightly different. First of all you need to prepare:

• Acetone.
• A sponge.
• A brush.

To restore a wooden stool, it is necessary to remove the old covering. To do this, treat the surface with acetone. Thereby removing the old coating in the form of varnish.

Using a brush, coat the stool with new varnish. Leave it for a while. After this you can use the chair again.

Some tips (master class):

• To cover small cracks, you can use homemade putty. To make putty you need to take flour and PVA glue. The mixture should be very thick and resemble plasticine.
• To freshen up a wooden stool, you can use stain. It has different shades. Be sure to seal the stain with varnish. Otherwise, you won't wash your clothes.

How to decorate an old chair in an original way - master class

Save

At home, you can paint the stool however you like. If you choose the right design for a chair, it can complement the interior of your home. For example, choose two colors for painting, the first is turquoise, the second is white. Now let's move on to the back. It needs to be treated with fine-grained plaster. A “worn” effect will appear. Choose the upholstery material so that it matches the color of the product.

If you want to make a vintage stool, then choose cream, blue, pink paint. Then paint on the chair. You can paint the entire stool or individual parts. Now you need to apply gold paint. Small cracks in this case will be in order. They will create an antique effect.

If you need to make a chair in the Empire style, then choose a milky color for the upholstery fabric. Floral prints are also allowed on it. The frame is covered with gold paint.

If you don’t want to bother with paint, you can sew a cover. It will completely cover all the shortcomings of the old stool.

You can replace the regular upholstery with leather straps. Take about 30 leather belts different colors and intertwine them with each other. You need to intertwine according to the “basket” principle, and then fix it from below with self-tapping screws.

Restoration: patchwork technique

Save

Each of us has a whole package of unnecessary things that we definitely won’t wear again. This is the kind of material that will be useful for creating a stool design in a patchwork style. You need to decide on the range and choose suitable materials from things.

It is worth noting that there is no need to use elastic materials. Choose simple things without complex patterns. Use old upholstery as a template.

If you are restoring chairs for the first time, then you need to choose square or rectangular elements for upholstery.

Slice required amount flaps and distribute them over the surface of the seat. The flaps may vary in width. This will create a “mosaic” effect. Sew a ribbon from pieces of fabric. To do this, you can use a machine or do everything by hand. Collect the resulting strips into a single canvas. Try the template on the seat. Cut off any excess. Secure the upholstery.

Decoupage technique for the design of an old chair

This technique will help turn monotonous stools into original and beautiful objects that will decorate the main interior of the house. To create a design you will need napkins, fabric with a pattern, you can use leather appliqués. If you can get to the store, you can buy special cards for such equipment.

Save

After you sand the chair, you need to seal all the cracks with putty and cover everything with water-based emulsion. Cut out the picture, apply glue and attach the drawing. Gradually you need to move from the center to the edges , thereby smoothing out the pattern. Let the surface dry and then varnish it.

Restoring an old chair with your own hands is not that difficult. The main thing is to do everything step by step. An old product can look like new if you pay attention to its design. You can paint it, make different upholstery, sew covers, or use different design techniques. Then the chair will not only perform its functions, but will also become an addition to the interior of the room.

Don't rush to throw away old things. They can be useful for restoring an old stool. We have reviewed different variants for stool designs that anyone can make.

Sooner or later, most of us are faced with the task of buying new furniture, including chairs. At the same time, it doesn’t always make sense to buy new furniture to a fairly high price, since we can restore old chairs.

This approach has many advantages. Here are just the most obvious of them:

• It won't take long, especially if you follow the instructions.
• Using old Soviet furniture instead of buying new will allow you to save a lot.
• It will help you create new, yet unique, interior items that no one else will have.

The thing is that chairs, like any other piece of furniture, are not something eternal. Even high-quality chairs are subject to aging and breakdown, especially in cases where we, in one way or another, “help” them, inadvertently causing damage. So it turns out that pieces of furniture become unusable. Of course, chairs, being one of the most actively used pieces of furniture, suffer first of all. In this case, as a rule, the seats of the chair are subject to the greatest damage, while all other parts remain more or less intact and unharmed.

If you are interested in restoring old chairs with your own hands at home, then you can be sure that you do not even need to have any extensive experience in decorating and repairing. It is enough to master a master class on reupholstery, painting, decoupage and other options for remodeling and decorating old furniture and you will be able to repair a chair. In any case, this experience will be useful in the future, since you will be able to upholster “grandmother’s” sofas and reupholster chairs of approximately the same age. Thanks to this approach, almost any furniture is provided with a second life, and not just a place in a landfill or in a closet, as often happens.

Meanwhile, the idea of ​​repairing furniture has one more, albeit not the most obvious, plus. The point is that how to restore old chairs at home will help not only make something new that already seemed unnecessary. In addition, you can feel the pleasure of embodying your creative energy.

How to update a chair or armchair

First of all, it is necessary to recall that the method of restoration depends on the exact nature of the damage. If we try to identify the main damage, we can identify the most common types of damage:

• A broken leg, problems with the back, seat or other wooden part.
• The upholstery is showing wear.
• Worn out paintwork on wooden surface(especially when restoring Viennese chairs).

So, the method of restoring the chair will depend on which part is broken or worn out. So, the restoration and repair scheme should be chosen depending on the places (or places) in which problems exist.

Often it is enough to simply connect the separated parts, restoring one of the connecting parts that may have deteriorated over time. It's about about groove and tenon. Wear or expansion of one of them leads to the fact that the chair gradually becomes unstable and begins to wobble on its legs. Repair, as a rule, consists of almost complete disassembly of the structure with extension of the tenon. To solve this problem you will have to, as they say, try.

On the other hand, if you need to restore a wooden chair in which the old paintwork has deteriorated, it can be done much easier. If the varnish is cracked, you just need to remove it and sand the surface with fine-grain sandpaper. And then apply another coat of paint. Or varnish, if this type of coating is provided for you. In any case, paint or varnish is your choice.

Also quite simple matter is the reupholstery of old chairs. To do this, you only need to replace the old worn or torn fabric with a new one. Let's take a closer look at the main stages of restoring chairs at home.

Recovery stages

Any chair can be made new. However, this requires at least general outline know the sequence of work. If you do not have experience in doing this, then it is recommended to study at least a short master class, which will be discussed below.

Preparatory stage

With the proper approach, even if the chair's upholstery is torn, the legs are wobbly, or the old varnish or paint is partially or completely cracked, it can be completely transformed by doing the restoration yourself. First of all, you will need the minimum required set of tools and materials:

1. Tools for restoring a chair: a screwdriver, a hammer, 2 different screwdrivers, scissors, a brush, a clamp, a stapler, sandpaper, a small mallet and scissors.
2. Materials: screws (self-tapping screws), staples for a stapler, glue for wooden furniture, foam rubber, paint and varnish, upholstery fabric.

After preparing the materials, try to clean the chair from dirt and dust by washing it thoroughly. To do this, you can wipe the chair with a slightly dampened sponge.

Disassembly

Before restoring the chair, it must be disassembled. After waiting for the chair to dry after wiping it with a damp sponge, you can proceed to disassembling it. The seats and backrest, as a rule, can be removed quite simply, after which the frame is disassembled. To ensure that the components are not damaged when knocking them out, use rubber mallet, not with a metal hammer. In any case, you should work very carefully.

If the table is assembled with screws or screws, then disassembling it is not difficult, since you just need to unscrew them. In any case, it is advisable to dismantle all parts, since they may interfere with repairs. In this case, if possible, you should mark the fastener parts or simply fold them in such a way that you cannot confuse them later.

As for how best to remove the remnants of old glue, especially epoxy. Those places where there are glue residues must be covered with pre-moistened rags or sponges. Any old and unnecessary rag will do. Keep it on the chair parts until the glue is completely wet, after which it can be quickly scraped off with a knife.

Please note! For this job it is better to find an old one dull knife, since there is no point in using a new or well-sharpened one.

Either way, after you've finished getting rid of the old glue, you'll need to leave some time for the wood pieces to dry. In cases where epoxy resin gets into hard to reach place, it can be removed in approximately the same way, with the only difference being that you will need to use steam instead of water. If you don’t have any special devices that create hot steam under pressure, you can use the old-fashioned “method”, which involves using a hose with a tip that fits onto the spout of the kettle.

Step-by-step recovery instructions

So, after the preparation has been completed, we can proceed directly to restoring the old chair. Here's what you have to do:

1. First of all, get rid of chips and possible cracks. This is done using putty.
2. Then sand the wood thoroughly with sandpaper, first coarse and then fine, until the work surface is smooth.
3. Take a good look at the stele and all its parts. If the legs are wobbly, then this needs to be addressed. There are several options: either using a wedge (it is driven in from the end of the axle), or wrapping the axle with a bandage and then covering it with glue.
4. If the legs of the chair are very wobbly, but for one reason or another they could not be dismantled, then there is one way that helps solve the problem. Okay, you need to drill thin hole at the junction, and then pour glue there using a syringe.
5. In order for the glue to “stick” better and the connection to become reliable, place any available weight on the seat and wait until the glue is completely dry.
6. After this, the chair seat is restored, if necessary. It may consist of either soft upholstery, and be made of wood. It all depends on the design of the chair. As for remaking the frame, you can use several different finishing options for it, ranging from varnish or red to this rare technology like decoupage.

By the way! Alternatively, you can sew covers. This will not only update the old chair, but also make it attractive due to the interchangeable design of the covers.

DIY restoration

Now let's see what can be done with antique chairs during restoration and how best to decorate them.

Decor using fabric

This decoration is quite simple to do. You need to either reupholster the old soft places or sew covers. By the way, a similar approach can be applied to sofas and other pieces of furniture.

Backrest update

There are different options. Among the most common ones that can give chairs a new life are decoupage and the use of textiles (including denim).

Restoration by reupholstery

The main thing in this case is the choice of high-quality and durable fabric. These include: jute, tapestry and jacquard. Sometimes velor will do. Upholstering chairs using tapestry is an excellent technique, which, by the way, gives an excellent result in the end. By the way, you can add a pattern woven using the macrame method to the fabric.

We use macrame for decoration

If we talk about macrame in a little more detail, it should be noted that this can be done even if you do not have the skills to weave using this method.

One possibility is this: if the back of the old chair is soft, remove the upholstery and weave a simple mesh with square section. By the way, the size of the cells can be either large or small. To give the updated chair a more harmonious appearance, you can also redo the seat upholstery.

Decoupage technique

This option can turn your chair into a true decoration. With help this method you can decorate a lot of things by doing various crafts, even decorating a souvenir box. So, you can extend the life of antique chairs, however, only if all of them structural elements made of wood.

Jute decoration

And finally, I would like to say a few words about how you can decorate an old, for example, Soviet chair if you have unnecessary or torn jeans. There are two options for decorating: completely upholster the chair using jute, and use denim as an additional decoration. This could be a strip or a small flap.