Bathroom renovation 150 by 13 5 and turnkey toilet
will cost 90000
rub.
Turnkey completion time (3-4 weeks)
Bath (1.5 by 1.35 m.) and toilet (1.1 by 0.8 m), height 2.5 m.
| Types of jobs | Quantity |
|---|---|
| Dismantling work (dismantling old plumbing, tiles, doors, etc...) | |
| 44sq.m. | |
| 22sq.m. | |
| 6 points | |
| 12sq.m. | |
| Fan installation | |
| 19 sq.m. | |
| 3 sq.m. | |
| Grouting joints | 22sq.m |
| 3sq.m | |
| 2 pcs. | |
| Installation of accessories | 7pcs. |
Bathroom renovation 170 to 170 and turnkey toilet
will cost 100000
rub.
Turnkey completion time (4 weeks)
Bath (1.7 by 1.7 m) and toilet (1.2 by 0.9 m), height 2.7 m.
| Types of jobs | Quantity |
|---|---|
| Primer of walls and floors (two layers) | 58sq.m. |
| Leveling walls and floors according to beacons | 29 sq.m. |
| Installation of coarse filters, meters, fine filters, collectors (combs) for cold water and hot water supply | |
| Installation water pipes and sewerage (with recessing into the walls) | 6 points |
| Installation of a plumbing duct in the toilet (from foam blocks) | |
| Waterproofing in the bathroom | 16sq.m. |
| Installation and connection of a cast iron bath | |
| Fan installation | |
| Electrical installation work (sockets, replacement of electrical wiring, switches, installation of lamps) | |
| Laying tiles standard sizes(not less than 20 x20cm) on the walls | 25 sq.m. |
| Laying tiles of standard sizes (not less than 20x20cm) on the floor | 4 sq.m. |
| Grouting joints | 29sq.m |
| Installation of slatted or plastic ceiling | 4sq.m |
| Installation of roller shutters or overhead hatch in a sanitary closet | |
| Installation of an overhead screen under the bathtub (MDF or PVC) | |
| Installation and connection of a bathtub, sink with cabinet, toilet, washing machine, sink faucet, bathtub faucet or installation of a shower system | |
| Installation and connection of a heated towel rail | |
| Installation of doors (without extras) | 2 pcs. |
| Installation of accessories | 7pcs. |
| Cleaning and removing trash up to the stairwell |
Renovation of a combined bathroom 150 to 185 turnkey
will cost 85000
rub.
Turnkey completion time (3 weeks)
Combined bathroom (1.5 by 1.85 m.) height 2.5 m.
| Types of jobs | Quantity |
|---|---|
| Dismantling work (dismantling old plumbing, tiles, doors, pipes, concrete protrusions, etc...) | |
| Primer of walls and floors (two layers) | 34sq.m. |
| Leveling walls and floors according to beacons | 17 sq.m. |
| Installation of coarse filters, meters, fine filters, collectors (combs) for cold water and hot water supply | |
| Installation of water pipes and sewerage (with recessing into walls) | 6 points |
| Installation of a plumbing duct in the toilet (from foam blocks) | |
| Waterproofing in the bathroom | 10 sq.m. |
| Installation and connection of a cast iron bath | |
| Fan installation | |
| Electrical installation work (sockets, replacement of electrical wiring, switches, installation of lamps) | |
| Laying tiles of standard sizes (not less than 20x20cm) on the walls | 14.5 sq.m. |
| Laying tiles of standard sizes (not less than 20x20cm) on the floor | 2.5 sq.m. |
| Grouting joints | 17sq.m |
| Installation of slatted or plastic ceiling | 2.5 sq.m |
| Installation of roller shutters or overhead hatch in a sanitary closet | |
| Installation of an overhead screen under the bathtub (MDF or PVC) | |
| Installation and connection of a bathtub, sink with cabinet, toilet, washing machine, sink faucet, bathtub faucet or shower system | |
| Installation and connection of a heated towel rail | |
| Installation of doors (without extras) | 2 pcs. |
| Installation of accessories | 7pcs. |
| Cleaning and removing trash up to the stairwell |
Turnkey renovation of a combined bathroom 170 by 220
will cost 90000
rub.
Bathroom renovation including demolition of the plumbing cabin and improvement of the layout
(extension into the hallway or kitchen)
will cost from 110000
rub.
Renovation of a bathroom and toilet in a Stalinist house
will cost from 110000
rub.
Additional work that may affect the total cost
| Types of jobs | Surcharge |
| Demolition of aceid sanitary cabin (walls and ceiling) and construction of new walls | +20000 rub. |
| Demolition of the plaster cabin (walls and ceiling) and construction of new walls | +25000 rub |
| Moving a doorway | +3000 rub. |
| Instead of a standard toilet, installation wall hung toilet with installation | +5000 rub. |
| Installation of a hygienic shower | +4500 rub. |
| Installation of a shower - tropical shower from the ceiling or from the wall | +7000 rub. |
| Installing a hot tub | +5000 rub. |
| Installing a shelf inside the wall | +7000 rub. |
| Installation of the podium | +3000 rub. |
| Installation of an invisible hatch and tiling | +2000-6000 rub. |
| Water heater installation | +4000 rub. |
| Installation and connection of heated floors | +6000-8000 rub. |
| Installation of extensions on one door | +1000 rub. |
It is important for us that you know the exact cost of our services before renovating your bathroom and toilet.
There will be no extra charges during the repair or upon completion of the work.
And you can also order partial renovation bathroom:
Complete replacement of water supply and sewerage 25000 rub. - 35000 rub.
Partial replacement of water supply and sewerage (1t.) - 4500 rub.
Thanks to modern construction technologies Today you can equip a house made of wood with minimal costs and maximum comfort. Complete finishing of the house is the key to the strength and durability of the structure. Homeowners need to take care when choosing a reliable contractor finishing works. If your home is located in Moscow, St. Petersburg or the region, you just need to leave a request on the crowdsourcing service Youdo.com. Respond to it in a matter of minutes the best masters, which:
- Easily arrange every room in your home
- apply modern materials and tools
- provide a full guarantee for all types of work
- allow the customer to set the prices for their services themselves
If a few years ago the bathroom was finished in wooden house was carried out without taking into account technology, today you need to carefully consider all stages of finishing.
Finishing a bathroom in a wooden house
Wood is susceptible to rotting and dampness, so you need to treat the walls, floor and ceiling with special compounds. It is also very important to install good ventilation in rooms with high humidity. Our performers will give you good advice when choosing materials for finishing a bathroom. Finishing a bathroom in a wooden house can be done using the following materials:
- ceramic tiles
- waterproof laminate
- porcelain tiles and mosaics
- plastic wall panels
and others The finishing of a house or its individual rooms is carried out taking into account fire and radiation safety requirements. If previously a bathroom was installed only on the first floor, today you can install a bathroom on the second and third floors. Of course, there are a number of features that need to be taken into account when carrying out work.
Features of finishing a bathroom in a country house
First, the master must decide on the arrangement of furniture and equipment in the bathroom. After which, he will finish the floor using one of the materials. The most common ways to decorate a bathroom ceiling are:
- lining or imitation timber
- stretch ceiling
- natural wood treated with special solutions
Finishing a bathroom in a wooden house using ceramic tiles is the leader among finishing options. From all kinds of textures, sizes and colors of tiles, you can choose the most interesting type of material to decorate your bathroom in a traditional, urban or any other style.
If in the past the question of how to renovate a bathroom in a wooden house was a real problem (after all, any Decoration Materials), then today chemistry building materials went to new level. As a result, the problem is no longer as acute as before.
In this article, together with the specialists of the Teplo Doma company, who know everything about how to repair a bathtub in a wooden house in Moscow, we will try to understand the features of the reconstruction of this room. In the same review, we will familiarize ourselves with materials whose use is justified for operation in variable temperature and humidity conditions and.
Where to begin?
Most wooden houses ceilings and floors on the ground are wooden, respectively, all structural elements are made from this raw material. However, for modern finishing technologies this is not an obstacle: if desired, such a surface can even be tiled. Tiles in a bathroom in a wooden house will be appropriate; moreover, this whole “pie” can be heated with the help of heated floors or the heat loss through it can be minimized using extruded polystyrene foam.
How is all this done? How to renovate a bathroom in a wooden house efficiently? By and large, everything is done identically to buildings made of concrete or stone, but with some nuances. If the whole process is divided into stages, then we we get the following list(works are listed in their logical sequence):
- Waterproofing floors and the lower section of the bathroom walls. It is necessary to immediately make a reservation that everything regarding this point is carried out simultaneously - as a result, we get a solid “bowl” or “trough” of polymerized mastic. Here for protection wooden floor A bitumen primer should be used, which is then covered with PVC or another waterproofing membrane.
- Screed. After the preparation has been carried out, it is poured in the standard way - if desired, insulation is laid underneath, and a reinforcing mesh or frame made of wire reinforcement is placed on top.
- Laying floor tiles. This process is performed after finishing the walls in the bathroom in a wooden house.
As you can see for yourself, during the repair wooden house there are not as many difficulties as expected, but without observing these nuances, the operation of the premises will present a lot of unpleasant surprises.
Decorating bathroom walls in a wooden house
An important role in decorating a bathroom in a wooden house is played by the selection of appropriate materials for the walls. Most often used for these elements combined finishing – the main area is designed using natural materials, and those places where there is a high risk of water splashing on the walls are tiled. In particular, the corner of a shower stall or bathtub can be sewn up plasterboard sheets and stand out with backlighting for expressiveness. The same solutions can be applied to the washbasin/sink.
Moreover, over the years of existence have shown their effectiveness:
- PVC wall panels;
- MDF panels;
- block house;
- decorative plasters.
When using any of these materials, care should be taken to ensure sufficient air exchange in the room - for this purpose, install forced ventilation systems.
Do you wish order finishing of a bathroom in a wooden house in Moscow? This correct solution- everyone better mind their own business! Contact the consultants of the Teplo Doma company and they will be able to tell you all about the prospects for mutually beneficial cooperation!
We employ only qualified specialists who follow the latest innovations in the repair services market and regularly improve their own skills at professional workshops and master classes. Over the 16-year history of the company, they have managed to implement hundreds of projects and received many positive responses.
The desire to create comfort and convenience in a home, apartment, cottage, to save space in the bathroom or to expand the capabilities of this room leads to the decision to buy a shower stall.
Installing shower cabins is a task that requires a professional solution. The Remzak company will provide high-quality services to ensure that the shower box works for a long time and properly.
Order plumbing work for installing a shower cabin, and Remzak specialists:
- They will help you choose a model based on your wishes and features. engineering systems;
- They will carry out preparatory work: dismantling old equipment, supplying water supply and drainage to the installation site, connecting to the electrical network;
- The cabin will be assembled and installed;
- They will connect and check operation in all modes.
- They will issue a guarantee for the installation.
Call a specialist
Attempt self-installation shower box will lead to unpleasant consequences: flooding of neighbors, failure of cabin systems, discrepancy between operating modes and passport parameters. It is worth paying attention to the danger of injury electric shock, if the connection to the network is made by a non-specialist.
Contact the Remzak company, installation of shower cabins in Moscow is our specialization. We guarantee high quality work and a long service life of this modern plumbing equipment.
Our services
A shower cabin is a sanitary product designed for taking a shower. Represents a limited space protective structure. Structurally, it consists of a pallet and a cabin that is completely closed or open at the top. This ensures a comfortable shower without splashing water. 
Installing a shower cabin saves space compared to installing classic bath. We install:
- Classic shower cabins without additional options;
- Showers with hydromassage;
- Shower cabins with a steam generator and Turkish bath function; additional functions include the presence of a “tropical rain” function, regular and relaxing lighting, FM radio or MP3 player.
Order installation of shower cabins of any type, size and shape. We work with products from leading manufacturers of plumbing equipment, including the following products:
- Chinese brands: MIDOCEAN, APOLLO, EAGO, FRESH, ATTOLL, AUMEIA, NIAGARA, LEMEN, VINTORIO, RIVER, GOLDEN FISH, NAUTICO, AQUALUX, AMMARI, BORNEO, VELA, LIEDER, AVANTA, COLISEUM, VICTORIA, ERLIT, AQUA, SEAN, GOLF, JOY, H.X.;
- Russian companies: AQUARELLE, RADOMIR, AQUAVITA, AQUANET;
- Made in Italy: ALBATROS, DOCTOR JET, TEUCO, GLASS, JACUZZI;
- German companies: HUBER, SERENA, AM PM;
- Finnish models: TIMO, IDO;
- Czech brands: LUXUS, RAVAK;
- Swedish made: EKA, IFO.
Our services for installation and connection of shower cabins and boxes include:
- Preparatory work in the bathroom: dismantling old plumbing, waterproofing equipment;
- Supply of engineering systems to the installation site (water, drainage, electrical network);
- Assembly, installation and connection of the cabin;
- Sealing of all connections, seams, joints;
- Checking the system in all operating modes;
- Handing over the work to the client with a guarantee.
The Remzak company will provide turnkey installation of shower cabins, including subsequent repairs and finishing of the bathroom.
Cost of installing a shower cabin
The total cost of work on equipping a shower box depends on many factors and is calculated by a specialist. When installing a shower stall, the price for the work depends on:
- Cabin size and type;
- The need to bring communications to the installation site;
- Functionality cabins;
- Features of the room where the installation is carried out.
Price for installing shower cabins in Moscow:
| Type of work | Cost, rub.) |
| Installation of a simple cabin with electrical supply | from 2500 |
| Installation of a simple cabin without electrics, without rear walls | from 2245 |
| Installation of a square-sized cabin without electrical supply + rear stacks + pressurization | 3560 |
| Cabin installation square section 80*80, 90*90, 100*100 with electrical supply | from 3800 |
| Cabin installation with rectangular cross-section 120*85,135*85, 150*85 | negotiable |
| Installation of a multifunctional shower cabin (steam generator, hydromassage) | 4400-5900 |
| Installation of a multifunctional shower cabin with Turkish bath and sauna functions | from 4600 |
| Assembly + installation of a shower cabin with a jacuzzi | from 8000 |
| Modernization of communications for connecting the cabin (drainage, water, electrical) | negotiable |
| Installation of plastic curtains | 990 |
| Installation of glass curtains | 1390 |
| Installation of a shower column | negotiable |
| Installing a simple hydromassage column | 2000 |
| Installation of hydromassage column + electrical equipment | 3500 |
| Fixing a leak in a shower stall | from 1000 - 1600 |
| Installing a podium under a shower stall | 2200 |
| Replacing the shower diffuser | 100 |
| Installation of a shower panel with hydromassage nozzles | 2000 |
| Installation of an acrylic tray on the floor + connection to the sewer | 1950 |
| Dismantling the shower cabin (depending on the size, type and need for subsequent use removed equipment) | 700-1900 |
| Calculation of work (free of charge when work is ordered from us) | for free |
| Selection of equipment by our specialist, inspection upon purchase (in an hour) | 250 |
Note: the cost of work does not include additional materials.
Shower cabin assembly
Assembling a shower cabin is a critical stage on which the quality of its operation, the absence of leaks and compliance with the passport parameters of all operating modes depend. 
This stage of work includes:
- Pallet installation;
- Installation of walls and movable curtains;
- Installation of a shower column;
- Installation of the control panel;
- Connecting the internal components of the box.
Remzak craftsmen will assemble the shower cabin efficiently and quickly, regardless of the manufacturer, type and functionality.
Connecting a shower cabin
After preparatory work and assembly of the shower cabin, the connection is made in compliance with technology and safety rules. At this stage, Remzak employees connect:
- sump siphon to the sewer drain;
- cold and hot water to the appropriate entry points of the shower box;
- power supply to the cabin, if necessary.
After completing the work, the tightness of the connections and the absence of leaks, as well as the quality of the insulation, are carefully checked.
How to order installation of a shower cabin
Do you need to equip your house, apartment or cottage with modern equipment such as a shower? Order installation from our company. You can do this in several ways:
We will contact you immediately to clarify the details, agree on the time and list necessary services, we will come to you to assess the scope of work and its cost. After receiving consent, our specialists will begin work. A few days after contacting us (the period depends on the volume and complexity of the work), you will be able to experience all the benefits and comfort of using a modern shower cabin.