It's no secret that today almost any product for garden plot They are not cheap in stores. So, for example, purchasing various accessories will cost, as they say, “a pretty penny.” And if you make them “from scratch”, then you will spend no less, because starting materials you still have to buy it.
So why not save money and organize homemade projects for the garden with your own hands from what you usually have on hand or is inexpensive? Moreover, everything can be done really beautifully and neatly. And in addition it is also functional.
In this article we will look at the most useful homemade products with your own hands for the cottage and garden, which are distinguished by their simplicity and originality.
Beautiful “useful things” for the garden
One thing worth noting important point- you need to understand that only a small part of the list of crafts that can be made will be sorted out. It’s just that these options are like a start, a “push” for imagination.
After all, here it is important to understand the very principle of how simple it is to organize everything, and then everything depends only on your imagination. So, let's begin the review.
Pond from an old bathtub
If you make a small reservoir of this type on a site, it will perform several functions simultaneously - we will familiarize ourselves with them in the table below.
Agree, the task is worth implementing. Moreover, for this you only need old bath, which in most cases is available on the site.
The pond is made according to this scheme:
- We dig a hole with our own hands in the right place, which in its parameters should be slightly larger than the dimensions of the bathtub.
Advice: be as responsible as possible when choosing a location.
It is not advisable to place a pond too close to dining table, For example.
The fact is that various midges, bees, etc. may periodically flock to the water.
And brushing away insects during lunch is not very pleasant, as you understand.
- We lay several boards at the bottom of the hole– the bathtub will stand on them.
- We insert the bathtub into the hole and level it. We close its drain hole with a plug. In this case, it is advisable to treat the outer edges of the cork with silicone to prevent water leakage from the container in the future.
- We fill all the free space between the metal and the soil with earth.
Well, then all that remains is to decorate the structure. To do this, you can spread it around the perimeter beautiful stones or, for example, plant flowers. In addition, you can create an edging from boards or any wooden sheets, panels that are more or less resistant to moisture.
As for filling the container, you can use it as water from central water supply, and natural flows. For example, you can bring the edge of the gutter of the house's drainage system to the bathtub and the pond will be filled with rainwater.
In principle, such homemade products for the garden can be slightly adjusted - use any tank, barrel, etc. instead of a bathtub.
Now let's look at another very convenient craft.
Pallet bench
Surely at some point you will want to sit in the garden - near artificial pond, For example. And then you will need one like this useful design like a bench.
Purchasing a new product is expensive. It is much easier to make a bench from a pallet - if it is not available, then, as a rule, a considerable amount of it is thrown away near large warehouses and factories.
The bench is made quickly.
- Make a cross cut on one side of the pallet to the left of the reinforcement bars.
- On the other side, perform exactly the same operation, only on the other side of the bars.
- We divide the product into two parts.
- We insert blocks of bars between the boards, as shown in the figure below. We get the back and seat.
- We fasten the wood with self-tapping screws at all connecting points.
- We place the remaining wooden elements under the seat and use them to adjust the height.
As you can see, everything is quite simple. Now you can paint the bench and install other homemade items for the garden and dacha.
Now let's look at a very functional, original and cheap craft.
A hanger is a very necessary element. After all, you can hang not only clothes on it, but also a considerable part of various garden tools.
Of course, the “primitive” version of this design is ordinary nails or self-tapping screws. However, it looks rather unattractive, and besides, the nails tend to gradually loosen inside the holes into which they are driven.
And loosening means that such “hooks” will periodically fall to the ground. We offer a more original and reliable solution– make a hanger from an old rake.
You only need their metal part, without wooden handle. Even if such an element is not available in barns, purchasing it at the nearest market is not a problem. The price of the rake is acceptable for everyone.
The hanger is mounted like this:
- We tie the wire to the two edges of the line on which the teeth are attached. In this case, there should be only one piece of wire. That is, it turns out that the fastener, in fact, resembles how paintings or mirrors are hung on a string.
- On the wall or anywhere Right place We drive a large nail and hang a rake on it.
The hanger is ready - you can hang anything you like on the rake teeth: shovels, caps, etc.
Now let's use old shoes, of which there are usually a lot at the dacha.
Flower pots made from shoes
The ideal option is to have rubber boots, but in principle ordinary leather shoes will do.
From such shoes you can make non-standard flower pots, which will fit perfectly into the style of almost any garden.
The workflow here is like this:
- We nail or screw the boots to the fence or any other suitable plane.
- We fill each boot with soil.
- We make several holes in the soles - they are needed to let out excess water.
- Plant flowers in pots and enjoy appearance inventions.
Note!
Any garden crafts you can “improve” it ad infinitum with your own hands.
The main thing in this matter is to correctly organize the “basic” thought, idea.
And you can decorate the invention with anything and however your heart desires - there are no restrictions.
Remember this simple rule when planning “benefits” for your garden or vegetable garden.
This concludes our review of useful and original crafts for a garden plot and summarize the article.
Conclusion
As you can see, gardener’s homemade products are quite simple, and they can be made from almost anything. We hope that this article will become a catalyst for your ideas and you will be able to decorate your area beautifully. Well, if you want more information on this topic, we recommend watching the video in this article.
Summer is the time when most people, escaping the bustle of the city, want to go out into nature. Probably every resident of a stuffy metropolis is familiar with the picture when train stations and commuter trains are filled to capacity with people who want to get out of the stuffy city closer to nature, to their country estates, where they can relax their soul and body, and also do useful work. For most people, a dacha is not just a place where you can relax, because it is here that you can engage in gardening, growing vegetables and other crops, and also realize your potential landscape designer! And, do-it-yourself homemade products for your home and garden on our website will help you with this.
Thus, it becomes clear that a dacha is not an easy place to relax from the bustle of the city, because for an experienced summer resident there will always be some interesting activity, for example: DIY crafts for the dacha. Among creative, enterprising and resourceful people, there is an opinion that sitting around doing nothing is a waste of time. It is for this category of “workaholics” that homemade products for a summer house and vegetable garden are not only a way to pass the time and improve your own plot without extra costs, but also an excellent method for realizing your hidden potential.
The section “DIY crafts for the dacha and garden” is intended for people who believe that the dacha is intended not only for relaxation, but also for active and generally useful work. Crafts for home and garden, which are presented in this section of our portal, can be easily made with your own hands from improvised means present in everyone’s arsenal experienced summer resident. Who would have imagined that even ordinary dacha garbage could turn into a real masterpiece of modern “dacha” culture!
In order to make the homemade items for the cottage and garden presented in the section, it is enough to have a standard set of tools and non-standard thinking, a desire to do something useful, as well as minimal skills in reading drawings and following instructions. Country crafts from scrap materials and construction waste are one of the most tempting options for saving extra money that can be spent on something more substantial. Moreover, the money saved can be used to improve a suburban area or arrange a workplace to create new crafts.
Thus, it becomes clear that with minimal skill in working with hands and understanding drawings, anyone can afford to create anything for their dacha: build and decorate the house itself or a cabin, develop their own unique interior elements or decorate old furniture, make an impromptu bath or steam room. And with a well-functioning imagination, you can create decorations for the garden or vegetable garden, organize homemade system automatic watering the same garden, and also protect the vegetables growing on it from pests. And all this, do-it-yourself homemade products for the dacha.
In this way, you can be convinced that the dacha, in itself, is a blank canvas on which a skilled worker, like a real artist, can realize a huge number of useful things and creative ideas. Moreover, if “dacha” creativity and physical labor using the brain brings pleasure, special pleasure. And the awareness that this or that functional device made with your own hands, at minimal cost, you must agree, it cannot but warm the soul.
In essence, a dacha is a piece of personal space where you can safely try to realize your most daring and extraordinary ideas, without fear of getting into an awkward situation. And the very fact that such crafts can save you from unnecessary costs for purchasing expensive garden equipment or expensive decorations for the site, it simply cannot help but warm the soul. In the section "useful homemade products for the garden with your own hands", the editors of our portal have collected the most daring and unusual design solutions And functional ideas, which can form the basis for a unique and inimitable development of one or another addition to the site using your own ingenuity. Build a playground? Easily! Do you need a greenhouse or greenhouse to grow vegetables, but don’t have extra funds? You can assemble them yourself! Expensive fencing can cause harm family budget? No problem! With the help of interesting ideas posted on our portal, these problems can be solved absolutely free of charge!
Thus, the old motivating slogan “If you want to do something well, do it YOURSELF” is gaining more and more relevance. After all, if you can do something yourself, then why go to the store for it and spend extra money that may be useful in the future? If you have a certain amount of knowledge, unnecessary trash can turn into a multifunctional device or an excellent addition to your country house interior or garden design.
Doing something with your own hands is not only pleasant, but also extremely useful, because, as you know, a developed person must be developed in everything. And when work brings pleasure, then doing something will not be difficult! Have a pleasant and productive holiday, summer residents! We hope that our homemade products for the garden and at home will help you in your household.
Landscaping your dacha will not be a problem or an expensive investment if you show a little ingenuity. It’s not difficult to create homemade products with your own hands – you will need time, simple tools and equipment. You can use leftover building materials, unnecessary boards, car tires, felled trees.
What materials are used
From stylish decor Any summer resident will not refuse the plot. Many companies offer original things. However, handmade crafts will help add originality to the site.
Materials most often used in work:
When decorating a dacha, there is no need to restrain your imagination - bold combinations of materials and non-standard use of unnecessary things are welcome.
It is not necessary to observe proportions or natural color combinations. The giraffe may have purple spots, and the train may be small in size.
Original decor for the recreation area
Many city dwellers purchase country plots for a relaxing holiday. It's nice to take a break from everyday life on the weekend and feel connected to nature. The design of a relaxation corner deserves attention; it is advisable to fence it off from the agricultural work area. A fashionable solution is to build small gazebos from leftover boards. You will also need pillars and beams for supports and cross beams.
Sequence of work:
- In the corners of the site, holes are dug 50-60 cm deep, into which beams are inserted and fixed with mortar.
- The support beams are secured to the upper ends of the beams using self-tapping screws.
- Cross boards are secured to support beams. On the uneven bars, the boards are fixed in horizontal view, leaving gaps 5-7 cm wide.
A neat trimmed lawn or a platform paved with stone – any options are suitable for decorating the site. To enliven the structure, flowerpots with flowers are installed near the site or climbing plants are planted nearby.
How to beautifully design flower beds
Fragrant flower beds - best decor recreation areas.
It’s easy to make a non-standard flowerbed fencing using available materials:
- If there is a small amount of brick left, you can lay out any flower bed in several rows. geometric shape. The solution will help secure the structure and give it strength. Flower beds made of natural stone also look natural.
- Car tires have long been a popular material in dachas. To give the flower garden a well-groomed appearance, it is advisable to paint the tires with bright paint and lay them out in several layers, forming flowerpots, or lay them out around the area in a curved form, forming circles and ovals.
A couple of plastic or wooden flowerpots will help give an old bicycle a custom look. The transformation is done quickly: the bicycle is painted with bright paint, flowerpots are fixed above the front and rear wheels. Climbing plants, whose branches will skillfully camouflage the metal structures, will give the structure a picturesque appearance.
An old bathtub won't look like trash at all if you transform it in a non-standard way. Of course, the simplest option is to use a colorfully painted container as a reservoir.
However, meticulous and not lazy summer residents transform the bathtub into cozy furniture for relax. For a wonderful transformation, you need to cut out part of the side wall with a grinder and carefully sand the sections. Comfortable sofas ennobled: painted in the desired shade, decorated with soft mattresses and headrests.
Improvised flower garden in the form garden watering can, installed nearby with a sofa will create a real relaxation area.
Stylish design of garden paths
Rusted metal tanks or old wooden barrels can be turned into original flower beds or even original beds that will successfully complement garden paths.
Stages of work:
Barrels, tubs, thick logs can be called the most pleasant material for work. It’s great that objects can be placed not only vertically, but also horizontally, sawed in half or built into multi-tiered structures.
The products do not require special decoration - the colorful wooden texture will serve as the best decoration.
DIY figurative compositions
It is quite understandable that every summer resident wants to give the site a unique look. In order not to spend money on the services of designers, you can create fun crafts with your own hands from scrap materials. Unnecessary garden tools, broken metal products, household containers, cobblestones and stones different sizes- everything comes into play.
How to make metal decor
Unique figures assembled from old shovels and broken rakes and hoes will become creative decorations for paths and lawns. It’s not difficult to create expressive images – the main thing is not to limit your imagination. To assemble a snail figurine you will need literally a narrow sheet of metal and a can of canned food. Black paint will give the figure a laconic look and make it very noticeable against the background of a green lawn.
The original solution is to combine different materials when creating figures. The union of stone and metal looks elegant and natural. The cat, assembled from rounded cobblestones of different sizes and metal elements, has a playful appearance. The stone pet is placed comfortably on big stone bask in the sun.
Flowers collected from metal tablespoons will become a brilliant decoration of the flowerbed. An impromptu flower garden will delight summer residents at any time of the year - rainy autumn and snowy winter. Flirty and aerial view The flowerbed will be enhanced by an umbrella made from metal tubes. It is not difficult to weld the structure at home. To plant flowers, first make a frame from plywood or thick film.
Original DIY crafts made from wood
Wood products always bring coziness to the decor of a garden plot. A wooden composition in the form of large porcini mushrooms will fit perfectly into landscape design plot. However, you can give the fungus a playful look by using a stump that has not been uprooted. It’s easy to create a funny grimace on wood using a chisel. And the hat can be made from thick saw cuts.
Become a real work of art decorative compositions, assembled from wooden cuts or logs. Animal figurines made from old branches, sticks and several logs look playful. More practical solution– arrangement of flower beds from small logs.
Create small flower garden in several stages:
- The log is sawn into several equal parts, and thin wooden branches are cut separately to decorate the wheels.
- In each element, the internal part is removed and separately from small boards making an improvised cabin for a train.
- Wheels are attached to the logs and the composition is laid on the site in the form of a train.
To make it easier to care for flowers, plants are planted in separate pots, which are simply placed in recesses.
Do-it-yourself functional homemade products deserve special attention - country furniture, assembled from scrap materials. The easiest way to make objects is from cut down thick wood. It is enough to make a table from the base of the trunk, and less thick logs will be used to create chairs. A small bench is assembled from individual branches and boards. It is not recommended to paint such furniture with colored paints - the natural texture of wood, coated with a colorless water-repellent varnish, looks more elegant.
A popular option for crafts is animal figurines collected from tree cuts. You can put together a composition from a couple of owls located on a stump. The stage of assembling homemade products made with your own hands takes a little time: from large cuts they make bodies, on which round eyes and wings are attached.
Do-it-yourself crafts for a country children's corner
Any tree - best option for decorating a children's playground at the dacha. Various materials will be useful in the work: logs, hemp, boards. Creating crafts for the garden with your own hands is a fun activity in which all family members can take part. Simple forms, minimum details, bright colors– such figures look elegant and fun.
It is easy to assemble figures from different materials. As an option - a set of wooden poles, car tires.
It’s easy to build a figurine near the playground:
- The tire is dug halfway into the ground.
- A pillar 8-10 cm thick is dug in front of the tire.
- An improvised muzzle made from a small log is attached to the top of the log. The details of the figurine (tail, ears, eyes) are cut out from plastic bottles.
- You can color the figurine to match any animal.
In order for a child to have fun spending time on the site, it is advisable to create not just decorative crafts, but gaming.
As an option, install plywood animal figures. Holes of different widths are made in the canvas through which balls can be thrown.
The solution is to design trains from small logs of the same size. To build the structure, you will need logs, paint, and tools.
Main stages of work:
- Holes are made in the base logs (an even number) of the same size.
- The bases are laid out on the ground at equal intervals and painted with one color.
- Log “cars” painted with multi-colored bright paints are placed perpendicularly on the bases.
- To highlight the “locomotive”, a pipe and a small “cabin” block are attached to the log.
Flowerbeds decorated in small metal barrels, will add brightness to the playground. Kids will love taking care of the flowers themselves, planted in colorful flowerpots.
Amazing crafts at the dacha are a great chance to give products a “second life” and decorate the area in an original way. With a little time and diligence, you can add functionality to modern, laconic decor, or simply decorate the area with figurines of your favorite cartoon characters.
Video about original crafts at the dacha
Do-it-yourself homemade products for your garden and garden not only perfectly complement your garden plot, but will also help you save a decent amount of money. Today there are many useful devices for the garden that simplify everyday life. Usually gathers at the dacha a large number of unnecessary things and materials that people do not use in their apartments. it takes up a lot of space. Any summer resident has the opportunity, using his imagination, to make simple homemade items.
Garden tools
When visiting hardware stores, many buyers note that the quality of garden tools does not correspond to their cost. Even an expensive and high-quality shovel is very easy to damage. One of the options is to personally make some kind of country tool that can perfectly replace a regular one. bayonet shovel. for example, a garden digger, which is not only very easy to make, but also easy to use. If we compare an ordinary shovel and this country tool, it can be noted that it is much easier for the second to dig the ground, and it does not place heavy loads on the human spine.
Homemade digger
To make a digger for the garden with your own hands, you need those items that often lie and gather dust in the country. Must have:
- metal sheet 2 mm thick;
- metal pipe 0.5 inches in diameter;
- 2 bolts and 2 nuts;
- 2 engraver washers for the bolts and 2 hours of free time.
Needs to be cut a metal sheet into 7 segments, similar to stakes. That is, you should get a stake that is wide on one side and tapering to the other. Then, take a pipe 43 cm long and measure 5 mm from the edge. The following marks are made every 6 cm. Another 5 mm should remain on the other edge of the pipe, which should also be marked. Using grinding disc on a grinder, you need to make cuts in the marked places to the middle of the pipe.
The cut stakes are taken (they will act as legs), inserted into the grooves cut in the pipe and secured by welding. The remaining pipes are then welded into a U-shaped handle and bolted to the workpiece. That's all, the digger is ready to use.
Garden decoration
We should not forget about the opportunity to become a designer of our own garden in the country. After all, you can make not only garden tools, but also much more. And to add some zest country house, you can post a beautiful and original garden path made of stone. Such a path will not only delight its owners, but will also become the latest trend, very popular among summer residents. For a stone path you will need:
- stone used to lay out the path;
- sand;
- gravel and board 25-30 mm thick.
Work should begin with a preliminary measurement of the distance of the future path. To do this, four pegs are driven in and connected in pairs with a guide rope. Afterwards, you need to remove upper layer soil, or in other words, dig a trench. When working with a shovel, one should not forget about the level of the trench, since it is better to make it even in depth. This will help not only to use correctly and economically Construction Materials, but will also simplify subsequent work. You need to install boards along the edges of the trench; they will act as sides into which sand and stones are placed.
First of all, gravel should be poured into the bottom of the hole. It will not only perform a shock-absorbing function, but will also provide indispensable assistance with drainage groundwater. Next, the gravel is covered with sand, which should be moistened in advance - this way it will lie more tightly. It is best to make a sand cushion with a thickness of 10 cm, and then you need to level the surface of the embankment with a board. Only after this can stone or paving stones be laid. It is necessary to calculate the thickness of the future path in advance so that you do not have to cut the stone again.
Mosquito traps
The invention fights not mosquitoes, but their larvae. It is suspended from tree branches. Mosquitoes lay their offspring in this device, which prevents the newly born mosquitoes from leaving it. For more effective fight with bloodsuckers you should make as many of these traps as possible. But even the use of this gadget cannot provide 100% protection against mosquito bites.
One of the most simple ways- This is to use an ordinary plastic bottle as a trap. You need to cut off the top part with the neck and insert it into bottom part so that the neck does not touch the bottom. Next, you should prepare a special solution that will attract mosquitoes. To do this you will need 15 g of yeast, 45 g of sugar and warm water. All 3 components need to be mixed and the resulting solution poured into the trap. Then, the bottle must be darkened. To do this, you can use a dark cloth or thick paper. This trap can attract not only mosquitoes, but also cockroaches. Therefore, the owners of a house in the village have the opportunity to use it in their living space.
These were just 3 of the most interesting and easily made devices for the garden and garden. Do not forget that a person can create something more useful and unique from available materials, you just need to give freedom to your imagination.
sadovod.guru
Homemade products for the garden and dacha: interesting ideas
For many, the private sector is associated with difficult permanent job. Plant a vegetable garden, monitor the growth of plants, and harvest. All this, of course, needs to be done. But if you organize the whole process correctly, then the work will be a joy. And there will still be a lot of free time for relaxation. And homemade products for the garden and dacha, made with your own hands, will help with this. Someone will object that everything can be bought ready-made in the store. This is true. But, firstly, there is not enough money to buy everything. And secondly, the process of making something useful from scrap materials can bring a lot of positive emotions.
Russian people have always been resourceful and inventive. AND great amount DIY homemade products for the garden and garden, photos of which can be found in our article, confirm this. We will offer for consideration only a few options that will be useful in any area.
Many gardeners have recently given preference to flower beds located in boxes. They are raised above ground level and fenced on all sides. This makes the maintenance process easier, and the garden bed looks more attractive and interesting. It is possible (or even recommended) to use such structures on soils poor in nutrients.
Homemade products for the garden involve the use of scrap materials. Therefore, to construct the box, you can use boards left over, for example, from building a house. If you don't have them, you'll have to purchase them at the store. A box of arbitrary dimensions is constructed from them. The dimensions will depend on the size of the plot, its style and the plant that is planned to be planted there. The height of the side is made approximately to the knee, so that the layer of fertile soil is thicker.
A metal mesh with a small cell is attached to the bottom of the manufactured box. It will provide protection against the penetration of rodents and moles. If there are none on the site, then you can do without a grid. You can easily make a small greenhouse from a box bed. Its height is selected taking into account the plants planted there.
Drip irrigation
Homemade products for the garden will simplify such a difficult process as watering plants. You can make a system drip irrigation. To do this, you will need a large barrel (metal or plastic), a hose, capillaries (you can make holes in the hose at a certain interval) and various connections(tees, clamps, etc.).
The barrel is raised approximately 1.5-2 m from the ground. To do this, you can weld a special stand from metal corners. Thanks to this, there will be stable pressure in the system. A main hose comes from the barrel. A filter must be installed on it so that debris does not clog the system. The capillaries are fed from the main hose.
DIY sprinkler
Homemade products for the garden and garden will allow you to create something necessary and useful on your site from improvised means and materials. For example, from old plastic bottles that are always thrown away, you can make a sprinkler for your garden. It will allow you to process and water plants of different heights. A sprayer is attached to the watering hose. The same spray nozzle is screwed onto a long stick (the longer the better). The lever is secured with a thread while pressed.
In a 1.5 liter bottle, a hole is made in the neck with a hot nail. A bolt is inserted into the hole and outside secured with a nut. The bolt must be drilled through with a drill. A hose is put on it and secured with a clamp. After applying pressure to the system, the nozzle spins and water is sprayed.
Tire compost bin
Old tires from passenger cars are one of the most popular and affordable materials for making homemade products for the garden. You can even make them compost pit. You only need 4 of them.
One of the tires, which will serve as a base, is cut. One side panel is cut off from it. From the rest, two sidewalls are cut off to form rings. Next, you just need to install the tires on top of each other in the designated area.
Bench
After all the work in the garden, you can relax. And on this score you can also choose suitable option handmade crafts for the garden and garden. With a small set of tools and materials, you can make an attractive, streamlined bench. It will become a place where you can relax and unwind.
Materials you will need:
- A sheet of plywood (preferably pine) measuring 90 x 90 cm and 1.6 cm thick.
- There are 7 slats made of the same wood (2 cm thick, 9.4 cm wide and 140 cm long).
- Boards 2 x 6.9 cm and 100 cm long, 3 pcs.
- Boards 2 x 6.9 cm and 140 cm long, 9 pcs.
The parts will be held together with 0.5 x 5 cm self-tapping screws. In addition, glue will be useful for joining wooden elements, wood varnish, turpentine.
The plywood sheet is cut into three parts. A template is drawn on them for cutting out the side panels and the central crossbar. The shape is cut out with a jigsaw. On the back there are 3 recesses for slats that will hold the structure.
Homemade products for the garden will help make your country life more pleasant and easier.
fb.ru
DIY crafts for the garden and vegetable garden (39 photos). Pond from an old bathtub. Pallet bench. Rake hanger. Flower pots made from shoes
It's no secret that today almost any gardening products are not cheap in stores. So, for example, purchasing various accessories will cost, as they say, “a pretty penny.” And if you make them from scratch, you will spend no less, because you still have to buy the raw materials.
So why not save money and organize homemade projects for the garden with your own hands from what you usually have on hand or is inexpensive? Moreover, everything can be done really beautifully and neatly. And in addition it is also functional.
Crafts on the site
In this article we will look at the most useful do-it-yourself crafts for the cottage and garden, which are distinguished by their simplicity and originality.
Beautiful “useful things” for the garden
It is worth noting one important point - you need to understand that only a small part of the list of crafts that can be made will be sorted out. It’s just that these options are like a start, a “push” for imagination.
After all, here it is important to understand the very principle of how simple it is to organize everything, and then everything depends only on your imagination. So, let's begin the review.
Pond from an old bathtub
Pond from the bath
If you make a small reservoir of this type on a site, it will perform several functions simultaneously - we will familiarize ourselves with them in the table below.
Agree, the task is worth implementing. Moreover, for this you only need an old bathtub, which in most cases is available on the site.
The pond is made according to this scheme:
- We dig a hole with our own hands in the right place, which, according to its parameters, should be slightly larger than the dimensions of the bathtub.
Pit design diagram
Advice: be as responsible as possible when choosing a location. It is not advisable to place a pond too close to the dining table, for example. The fact is that various midges, bees, etc. may periodically flock to the water.
And brushing away insects during lunch is not very pleasant, as you understand.
- We lay several boards at the bottom of the hole - the bathtub will stand on them.
- We insert the bathtub into the hole and level it. We close its drain hole with a plug. In this case, it is advisable to treat the outer edges of the cork with silicone to prevent water leakage from the container in the future.
Leveling the bathtub
- We fill all the free space between the metal and the soil with earth.
Well, then all that remains is to decorate the structure. To do this, you can lay out beautiful stones around the perimeter of the pond in the garden plot or, for example, plant flowers. In addition, you can create an edging from boards or any wooden sheets or panels that are more or less resistant to moisture.
An example of board edging
As for filling the container, you can use both water from the central water supply and natural flows. For example, you can bring the edge of the gutter of the house's drainage system to the bathtub and the pond will be filled with rainwater.
In principle, such homemade products for the garden can be slightly adjusted - use any tank, barrel, etc. instead of a bathtub.
Now let's look at another very convenient craft.
Pallet bench
Surely at some point you will want to sit in the garden - near an artificial pond, for example. And here you will need such a useful structure as a bench.
Purchasing a new product is expensive. It is much easier to make a bench from a pallet - if it is not available, then, as a rule, a considerable amount of it is thrown away near large warehouses and factories.
The bench is made quickly.
- Make a cross cut on one side of the pallet to the left of the reinforcement bars.
Cut line
- On the other side, perform exactly the same operation, only on the other side of the bars.
Cut line on the other side of the pallet
- We divide the product into two parts.
Dividing the pallet into two halves
- We insert blocks of bars between the boards, as shown in the figure below. We get the back and seat.
The principle of connecting halves
- We fasten the wood with self-tapping screws at all connecting points.
Fixation points
Photo of the lining under the bench
As you can see, everything is quite simple. Now you can paint the bench and install other homemade items for the garden and dacha.
Now let's look at a very functional, original and cheap craft.
Rake hanger
A hanger is a very necessary element. After all, you can hang not only clothes on it, but also a considerable part of various garden tools.
Of course, the “primitive” version of this design is ordinary nails or self-tapping screws. However, it looks rather unattractive, and besides, the nails tend to gradually loosen inside the holes into which they are driven.
And loosening means that such “hooks” will periodically fall to the ground. We offer a more original and reliable solution - to make a hanger from an old rake.
Rake hanger
You only need the metal part, without the wooden handle. Even if such an element is not available in barns, purchasing it at the nearest market is not a problem. The price of the rake is acceptable for everyone.
The hanger is mounted like this:
- We tie the wire to the two edges of the line on which the teeth are attached. In this case, there should be only one piece of wire. That is, it turns out that the fastener, in fact, resembles how paintings or mirrors are hung on a string.
- We drive a large nail into the wall or any desired place and hang a rake on it.
The hanger is ready - you can hang anything you like on the rake teeth: shovels, caps, etc.
Now let's use old shoes, of which there are usually a lot at the dacha.
Flower pots made from shoes
The ideal option is to have rubber boots, but in principle, regular leather shoes will do.
Shoe pots
From such shoes you can make custom flower pots that will fit perfectly into the style of almost any garden.
The workflow here is like this:
- We nail or screw the boots to the fence or any other suitable plane.
- We fill each boot with soil.
- We make several holes in the soles - they are needed to let out excess water.
- We plant flowers in pots and enjoy the appearance of the invention.
An example of pots made from boots that are suspended from an arch
Note! Any DIY garden crafts can be “improved” ad infinitum. The main thing in this matter is to correctly organize the “basic” thought, idea.
And you can decorate the invention with anything and however your heart desires - there are no restrictions.
Remember this simple rule when planning “benefits” for your garden or vegetable garden.
This concludes our review of useful and original crafts for the garden plot and sums up the article.
Conclusion
As you can see, gardener’s homemade products are quite simple, and they can be made from almost anything. We hope that this article will become a catalyst for your ideas and you will be able to decorate your area beautifully. Well, if you want more information on this topic, we recommend watching the video in this article.
Add to favorites Printable version
9dach.ru
Homemade products for the garden / Samodelka.net - Do it yourself with your own hands | Homemade products. Useful tips and recommendations for the home craftsman
101 readers, 162 topics
Everything related to cottages, gardens, vegetable gardens and country houses. Tips on growing plants, making garden tools, homestead construction, etc., etc.
A summer cottage is an area where you can give yourself the freedom to conduct numerous experiments and dream to your heart’s content. This manifests itself not only in interior design, but mainly in the design of a garden or vegetable garden. Inquisitive and inventive owners have long been no longer guided by expensive and standard methods for arranging their plots, since there are a lot of alternative solutions for virtually all areas of activity.
There are several types of vertical beds that allow you to optimize the use free space. Non-standard designs – a great opportunity create interesting design garden, vegetable garden, summer cottage.
This type of beds is in most cases used for growing ornamental plants or herbs.
Materials for production:
Length drainpipes regulated in accordance with the wishes of the owner of the site. However, you should not make bulky beds, as they can complicate movement around the area.
Creating a bed
Stage 1. Create a container. To do this, take a drainpipe, cut it in half lengthwise and put special plugs on both sides.
Stage 2. We take the prepared metal holders and put them on the resulting frames for the beds.
Stage 3. We make holes in the pipe. They are made in those places where metal fasteners will be located.
Stage 4. We pass a cable or strong rope through the holes made.
Stage 5. Fix the cable/rope using fasteners.
Stage 6. Fill the resulting beds with expanded clay and soil.
Stage 7. Plant the plants in the beds.
Stage 8. We hang the pipes to the selected location. Sometimes a special wooden crossbar is installed for this purpose, or rather a structure in the shape of the letter “P”.
Step 9: Alternatively, a special design can be made for the pipes.
Important! A bed made of drainpipes is not resistant to strong gusty winds, so you should choose a place for it that is not blown from four directions by winds. Otherwise, the frame will quickly collapse, nullifying all your efforts.
A garden bed made from plastic bag, is another modification of vertical beds. It is extremely compact, functional and interesting in appearance. You can make such a bed in a couple of hours.
Materials for production:
- durable polyethylene film;
- sewing machine;
- priming;
- seedling.
In order for the bed to be strong, it is recommended Special attention pay attention to the thickness of the polyethylene film, which in this case will act as the “frame” of the structure. The minimum film thickness is 0.2 millimeters.
The process of creating a polyethylene bed
Step 1 . We cut out 2 rectangular pieces of film, the size of which corresponds to the size of the bed being created. An allowance of one and a half to two centimeters should be left on each side. The recommended diameter of the bed is twenty centimeters.
Step 2. Sew the rectangles together, leaving only the top part of the bag unconnected.
Step 3. We sew a handle to the future bed, the strength of which will allow it to withstand the weight of the bag filled with soil. It should also be taken into account that when watering the weight will increase.
Step 4. Fill the bag with fertilized soil.
Step 5. We make horizontal cuts on the bag in increments of twenty centimeters. They are necessary for planting seedlings in the garden bed.
Step 6. Plant seedlings.
Step 7. Regularly water the soil and add the necessary fertilizers.
With these simple steps you can get a cheap and useful garden bed.
An integral element of every summer cottage is a compost heap. This is the place where all sorts of biochemical reactions take place to create fertilizers.
To create fertilizers that will satisfy all the requirements placed on them, several key steps should be carefully considered: creating the container and directly correct production the compost itself. Let's talk about each of them in more detail.
Stage 1. Take eight support posts of the same length.
Stage 2. Process the lower part wooden posts motor oil or tar.
Stage 3. We dig the posts into the ground so that they are reliable and stable. If compost bin will be located next to the fence, then 4 posts (that is, one side) can be attached to the fence. This will avoid having to dig 4 holes.
Stage 4. Between each two adjacent posts we nail the crossbars so that we end up with three independent sections. Be sure to leave gaps that will serve as ventilation holes.
Stage 5. In two sections, we nail the boards horizontally to half the height of the pillars. In these places it is planned to create two small doors.
Step 6. The remaining section will have a large door, so only one board should be nailed. It should be located at the very bottom in a horizontal position, that is, like a regular crossbar.
Stage 7. Install the covers. To do this, you can use one large solid board.
Stage 8. Install the pre-prepared doors.
Stage 9. We provide the doors with handles and latches.
Stage 10. We process the wood using special impregnations.
Stage 11. Paint the box in any color that suits your preferences.
Many gardeners mistakenly believe that any components can be dumped into a compost heap. In reality, to create the right biofertilizer, the “ingredients” must be carefully selected.
Among the required components compost heap the following components:
- peat;
- ash;
- needles;
- tree branches;
- leaves;
- hay or grass;
- wood ash;
- plant roots;
- raw vegetables and fruits, etc.
All elements are randomly mixed in a heap. To speed up chemical reactions It is recommended to cover the pile with a tarpaulin (this is especially true if there is no box).
Trips to the dacha with the family require the presence of entertainment elements on the site that will delight children. The most common way to keep young summer residents occupied is a swing.
Building a swing yourself is not an easy task, but it is quite doable. Of course, you can always take a stick, tie it with a rope and hang the structure on a tree, but this can hardly be called a full-fledged swing. Real craftsmen prefer to build convenient designs with a comfortable seating area.
Structural components:
- two logs;
- strong rope.
Indicators:
- log diameter – 85 mm;
- log length – 700 mm;
- distance between ropes – 500 mm.
Making a swing
Stage 1. We stretch the ropes between the logs.
Stage 2. Wrap ropes around each log.
Stage 3. Let the ropes out.
Stage 4. Tighten the ropes to 3 knots.
Stage 5. Attach the swing to the tree.
Important: this swing is designed for only one person.
Garden path from scrap materials
There are several types of garden paths that you can easily make with your own hands.
Step 1. Remove the sidewall from the tire using a knife or saw.
Step 2. Cut the tires.
Step 3. Line the space with corrugated stripes.
Step 4. Paint the path with paint.
Step 5. Sprinkle with stone chips.
This economical option for those who don’t want to rack their brains and waste time on a full-fledged garden path. Tire paths are usually used for vegetable gardens, as they are easily laid in the ground.
Stage 1. Paint the corks in different colors.
Stage 2. Dig a small trench.
Stage 3. We drive in supports to strengthen the future path.
Stage 4. We construct the formwork using boards.
Stage 5. Install spacers along the edges of the trench.
Stage 6. Place crushed stone deep into the trench and compact it thoroughly.
Stage 7. Make a solution from sand, cement, glue and water.
Stage 8. Pour the solution into the trench.
Stage 9. Press in the plugs in random order. Smooth multi-colored stripes look interesting.
These are the simplest and quick ways make a garden path without purchasing expensive materials.
DIY tools
The expression “everything is useful on the farm” turns out to be more relevant when we're talking about about canisters. From this plastic container you can make a large quantity indispensable tools, which are actively used in the process of dacha work.
To make this tool we only need sharp knife and the container itself.
Stage 1. Cut off the bottom of the canister.
Stage 2. Mark a cut line for the scoop on the container so that the handle of the canister is the handle of the future tool.
Stage 3. Cut off excess material.
Due to these simple actions we get an excellent scoop with a comfortable handle.
Materials:
Manufacturing
Step 1. Wash the canister thoroughly so that no odor remains in it.
Stage 2. Cut the canister vertically into two parts.
Stage 3. We make a groove on the board using a woodworking machine.
Stage 4. Apply glue to the plywood and insert it into the bottom of the canister.
Stage 5. Paint the resulting shelf using a spray can.
Of course, this design will not withstand a lot of weight, but it is quite suitable for storing small parts.
Materials:
- 40 cans;
- scissors;
- rope;
- paper;
- marker.
Stage 1. Pierce the top of the canisters with a knife.
Stage 2. Make a stencil from paper.
Stage 3. Apply it to the canister and outline it with a marker.
Stage 4. Cut out large holes using scissors.
Stage 5. We stack the prepared canisters in several rows, tying each row by hooking a rope under the handles of the containers.
Stage 6. We tie all the rows around the perimeter for greater strength.
Stage 7. If you plan to lean the cabinet against the wall, then drill it to the surface.
Stage 8. Place heavy objects - stones or bricks - in the bottom row.
The result is a fairly spacious and functional rack that will help get rid of the problem of storing many small parts.
Be resourceful and bold in implementing your ideas. Good luck!
Video – DIY crafts for a summer cottage
Video - We do it ourselves for the dacha