Ceiling plinth over painted wallpaper. What to glue first: wallpaper or ceiling plinth - expert opinion and tips on arrangement. What next decorative stone or wallpaper

What to glue first - wallpaper or ceiling plinth: features of using soft and hard baguettes, installation

Many people are interested in: “What comes first – the ceiling plinth or the wallpaper?”, although, at first glance, the answer is obvious. But not everything is so simple and unambiguous, and we want to consider this issue in detail, and at the same time we will tell you how to glue the ceiling plinth to the wallpaper and to the wall.

Before gluing the ceiling plinth to the wallpaper, you should think carefully.

Soft

The photo shows how flexible the fillet can be.

Top fillets are used to hide the visible border of the roll and the junction between the finish and the whitewash. In addition, these elements themselves carry a certain decorative value and are able to decorate the interior and give completeness to the decoration.

Exist different varieties fillets for finishing the upper part of the wall. Their main difference is the materials used to manufacture the panels and the associated physical properties.

The following materials are used to make baguettes:

Wood. Wooden fillets look great in any interior, from folk and classical styles to modern interior solutions. For the manufacture of good models they use valuable wood: oak, mahogany, walnut, larch and others;
Gypsum. This material allows you to easily create products of the most complex shapes and profiles, which are much lighter than natural stone, and also cheaper. However, it should be understood that gypsum is a hard material, and it is mounted on the walls as smooth as possible;
Stone. Sometimes you can find fillets made of natural and artificial stone, which fit perfectly into classic styles interior, and can also go well with modern finishing. The price of the products is high due to the complexity of mining, processing and delivery of stone blanks;
Plastic. Modern production is increasingly moving towards the use of polymers for the manufacture of the most different products and products. Baguettes were no exception: models made of polyethylene, polyurethane, expanded polystyrene, foamed polyvinyl chloride and other types of plastic are widely represented on the market. (See also the article Types of finishes: features.)

There are many varieties of baguettes.

Soft or flexible varieties of baguettes include only plastic products and, with some reservations, wooden ones. Here we can partially answer the question: “Is it possible to glue ceiling plinth to wallpaper?” If this product is flexible, inexpensive and light enough, then it’s possible.

The fact is that walls are not perfectly smooth, but baguette panels are, or rather, they are curved differently, and after installation there will be gaps between the part and the wall. It is customary to putty these gaps, and paper is a poor base for putty. If the products are flexible or soft, they will be able to follow the curvature of the walls, and putty will not be needed.

Flexible baguettes follow the curvature of the walls.

Important!
Only a light piece can be glued to the paper, otherwise it will fall off along with the glue, tearing off the wall finishing layer.
If you don’t know when to glue the ceiling plinth - before or after the wallpaper - check its flexibility and estimate its weight.

Since the flexibility and softness of wood remains a big question, there is only one 100% plinth for wallpaper left - plastic.

Solid

Gypsum is the most common material for making solid fillets.

Hard varieties include stone, gypsum, wooden crafts and products made from other materials that do not bend and act as fairly rigid parts. In this case, the question is: “What comes first – the ceiling plinth or the wallpaper?” receives the opposite answer, that is, first we glue the baguette.

The heavy, solid fillet is attached first.

What to glue first - wallpaper or ceiling plinth: the right finish

You should also remember that stone and plaster moldings are quite heavy and most likely simply will not hold up on paper.

Gaps and cracks are covered with putty.

Important!
Before gluing the ceiling plinth to the wallpaper, make sure that it is not made of stone or plaster and has sufficient flexibility.
Otherwise, fillets must be installed first.

Installation

Now a few words about the installation rules.

For those who are not against working with their own hands, we have compiled instructions:

After the glue on which the wallpaper is glued has completely dried, you can begin installing the ceiling moldings.
For this top part We clean the walls and the ceiling adjacent to it from dust with a dry cloth or brush. We trim off excess pieces of rolls;

Preparing the gluing area.

We take measurements and cut the required number of panels according to them. We cut the corner parts at an angle of 45 degrees using a miter box;

We use a miter box to cut corners.

Now for those who don’t know how to glue the ceiling plinth to the wallpaper: you can use silicone sealant or glue for the type of plastic from which the fillet is made. Apply glue to the back side of the panel and press the part tightly against the wall, wait for a while and release;

We press the baguette to the wall and ceiling with our hands.

We coat the joints between parts, especially at the corners, with acrylic-silicone sealant. You can also mix a little gypsum putty Fill large cracks with PVC glue and the resulting solution.

Important!
To avoid staining the walls, you can stick masking tape under the installation level.

Conclusion

The order of gluing wallpaper and upper fillets depends on the properties and density of the material of the fillets themselves. Flexible and light parts can be glued to wallpaper, while heavy and hard parts can only be glued to the wall. This article supplements the instructions and demonstrates the process of installing skirting boards under the ceiling.

http://nashaotdelka.ru

What to glue first, baguette or wallpaper?

There are several options here:

If you don’t use a plinth, then of course it would be better to first glue the wallpaper, but not on the entire surface, but calculate it in such a way that it extends 5 millimeters under the baguette, and then glue the baguette, but so that most of the gluing surface is on the wall...

When using a plinth, of course, it is best to glue the baguette right away, then the wallpaper, and then hide the imperfections with the plinth...

But it’s still more correct to glue the baguette first, and then glue the wallpaper...

Hello.

Of course, first it is better to glue the molding/cornice/baguette (whichever is more convenient for you) or simply the baseboard. I'll explain why.

If you buy a good quality, and frankly speaking, not a cheap cornice (even a Chinese one now costs quite a lot of money, I mean a wide, hard (not soft) cornice), then you can glue it on for many, many years until you get tired of it, and change the wallpaper without touching it. If you stick it on the wallpaper, then the next time you change the wallpaper you will have to change the cornice. This time.

Further, joints cornices are always always glued special glue, and after drying, they are sanded (because one way or another, cornices often vary in thickness and even height, especially if this is China), putty, and after that they are painted, in fact, just like the entire cornice is painted. That is, by gluing it to the wallpaper, you will significantly complicate your further work. That's two

In the lower part of the cornice, which is adjacent to the wall, after its installation, there is always a small gap left (maybe, of course, I’m being picky, but I’m used to doing everything carefully so that the customer doesn’t spit in the back later), it’s better to cover it with the same glue that and will use it to install the molding. It’s convenient to do this with a cotton swab; excess glue will be removed without a trace, and just enough of it will get into the crack as needed.

In what order do repairs begin?

Now imagine how you will do this if you start gluing the cornice onto the wallpaper. That's three

If you are afraid that it will be difficult to bring the wallpaper to the cornice, then there is nothing complicated. Just make a small overlap of wallpaper onto the baseboard, bend it with a wallpaper smoothing gun, place a spatula, and cut off the wallpaper using the spatula and a utility knife. You will get a perfect joint (maybe, of course, not right away)) but it will definitely work out, so it’s better to first practice on the walls where the furniture will be, or on window wall, there will still be a curtain))

Well, that seems to be all. If I wrote something unclear, write, I will answer. By the way, I’ll be hanging wallpaper soon, I might even make a short training video :)

Of course, it is better to stick on the baguette (molding) first if it is needed to divide the wall into separate zones or to create special paintings. The baguette is glued with special glue. And only then between the moldings and cornices (baguettes) wallpaper, frescoes are usually glued or plaster is applied. You just need to seal the moldings (baguettes) with a special adhesive tape so as not to stain them.

It’s better to stick on the baguette first, we did this in a recently renovated bedroom and everything looks just great.

But in the kitchen, we first glued the wallpaper, and then the ceiling plinth on top, it turned out well too, but in some places there are gaps visible due to the unevenness of the wall.

These cracks, when you first glue the baguette, are very easy to cover up and the slight curvature of the walls will not be so noticeable.

Ceiling skirting boards

Soft

Top fillets are used to hide the visible border of the roll and the junction between the finish and the whitewash. In addition, these elements themselves have a certain decorative value and can decorate the interior and give completeness to the finish.

There are different types of fillets for finishing the top of the wall. Their main difference is the materials used to manufacture the panels and the associated physical properties.

The following materials are used to make baguettes:

Wood. Wooden fillets look great in any interior, from folk and classical styles to modern interior solutions. To make good models, valuable wood is used: oak, mahogany, walnut, larch and others;
Gypsum. This material allows you to easily create products of the most complex shapes and profiles, which are much lighter than natural stone, and also cheaper. However, it should be understood that gypsum is a hard material, and it is mounted on the walls as smooth as possible;
Stone. Sometimes you can find fillets made of natural and artificial stone, which fit perfectly into classic interior styles, and can also go well with modern decoration. The price of the products is high due to the complexity of mining, processing and delivery of stone blanks;
Plastic. Modern production is increasingly moving towards the use of polymers for the manufacture of a wide variety of products and products. Baguettes were no exception: models made of polyethylene, polyurethane, expanded polystyrene, foamed polyvinyl chloride and other types of plastic are widely represented on the market. (See also article.)

Soft or flexible types of baguettes include only plastic products and, with some reservations, wooden ones. Here we can partially answer the question: “Is it possible to glue ceiling plinth to wallpaper?” If this product is flexible, inexpensive and light enough, then it’s possible.

Important!
Only a light part can be glued to the paper, otherwise it will fall off along with the glue, tearing it off.
If you don’t know when to glue the ceiling plinth - before or after the wallpaper - check its flexibility and estimate its weight.

Since the flexibility and softness of wood remains a big question, there is only one 100% plinth for wallpaper left - plastic.

Solid

Hard varieties include stone, gypsum, wood products and products made from other materials that do not bend and act as fairly rigid parts. In this case, the question is: “What comes first – the ceiling plinth or the wallpaper?” receives the opposite answer, that is, first we glue the baguette.

This is due to the fact that the solid part will not be able to follow the curvature of the walls, and cracks and gaps will remain between it and the surface. After fixing the part, these gaps are puttied, then the product is painted or whitened. You should also remember that stone and plaster moldings are quite heavy and most likely simply will not hold up on paper.

Important!
Before gluing the ceiling plinth to the wallpaper, make sure that it is not made of stone or plaster and has sufficient flexibility.
Otherwise, fillets must be installed first.

Installation

For those who are not against working with their own hands, we have compiled instructions:

After the glue on which the wallpaper is glued has completely dried, you can begin installing the ceiling moldings. To do this, clean the upper part of the wall and the adjacent ceiling from dust with a dry cloth or brush. We trim off excess pieces of rolls;

We take measurements and cut the required number of panels according to them. We cut the corner parts at an angle of 45 degrees using a miter box;

Now for those who don’t know how to glue the ceiling plinth to the wallpaper: you can use silicone sealant or glue for the type of plastic from which the fillet is made. Apply glue to the back side of the panel and press the part tightly against the wall, wait for a while and release;

We coat the joints between parts, especially at the corners, with acrylic-silicone sealant. You can also mix a little gypsum putty with PVC glue and fill large cracks with the resulting solution.

Important!
To avoid staining the walls, you can stick masking tape under the installation level.

Conclusion

The order of gluing wallpaper and upper fillets depends on the properties and density of the material of the fillets themselves. Flexible and light parts can be glued to wallpaper, while heavy and hard parts can only be glued to the wall. The video in this article complements the instructions and demonstrates the process of installing skirting boards under the ceiling.

When changing the interior design, many controversial issues arise, even in cases where initially everything seems simple and clear, and the work does not seem to be too labor-intensive and time-consuming. For example, when making repairs, many people are interested in the answer to the question: when to glue the ceiling plinth - before the wallpaper or after? It turns out that it is impossible to answer it immediately. The order in which baguettes are glued depends on a variety of factors.

Purpose

The upper fillets play the role of decoration and make the interior complete. In addition, they hide the boundary between the wall finishing material and the whitewash. The main difference between ceiling plinths is the materials used and, accordingly, their physical properties. The following materials are used for the manufacture of fillets:

Wood. This is a great option for various interiors: classical, country, modern. Good expensive models are made from oak, walnut, larch or mahogany.
Gypsum. This material is good because it can be used to create the most complex shapes and profiles. At the same time, if compared with natural stone, gypsum is much cheaper and lighter. But to successfully install a gypsum plinth, the walls need to be perfectly level.
Stone is not used very often for making fillets, but the result is truly amazing. Stone products fit perfectly into a luxurious classic interior, sometimes products made from natural or artificial raw materials look organically in modern premises. The cost of such products is quite high.
Plastic. Polymer compositions- one of the most common. For ceiling baguettes, materials such as polyurethane, polyethylene, polystyrene foam, PVC and many others are used.

Soft and hard baguettes and time for gluing them

Of the listed materials, the category of soft and flexible includes products made of plastic and, with some stretch, wood. If you are asking the question when to glue the ceiling plinth, then you can answer:

The lightweight, flexible design can be applied directly over wallpaper.
With more massive baguettes, such an experiment is unlikely to be successful.

The reason for this is the following: it is quite difficult to level the wall to an impeccable condition; the baguette has its own curvatures. It is customary to fill the gaps formed during installation with putty, and wallpaper is rather poorly suited as a base for putty. The flexible product follows the unevenness of the walls, and there is no need to use putty.

Important! What to glue first - wallpaper or ceiling plinth if it is hard? If we're talking about about wood, plaster or stone structures that do not bend, then first install the baseboard and then paste the wallpaper. In this case, the basis for the putty is the walls. In addition, the heavy structure will not only not stay on the paper or non-woven fabric, but will also come off along with the wallpaper.

Self-installation rules

After the wallpaper glue has dried, you can stick plastic baguettes:

First, clean the area where you glue it on the wall, as well as the adjacent part of the ceiling, from dust using a dry cloth or brush.
Do everything necessary measurements to cut the baguettes correctly.
Cut the corners at 45 degrees using a miter box.
You can glue the baseboard using silicone sealant. It is a good idea to use an adhesive intended for the type of plastic from which the baguette is made. Apply glue to the baguette pointwise, press the piece against the wall, and then release.
To mask gaps in the joint area, use acrylic-silicone sealant or a mixture of PVA glue and gypsum putty.

Video material

Thus, the order of wallpapering walls and installing ceiling skirting boards depends on the weight and material of the latter. How to properly glue the ceiling plinth - before or after the wallpaper, this issue is decided individually. A flexible plastic structure can be mounted directly on the wallpaper.

All photos from the article

Operations such as gluing wallpaper and installing ceiling plinths are quite simple. However, even they have certain nuances that raise questions among home craftsmen. In particular, many people are interested in whether to glue the wallpaper or glue the ceiling plinth first?

What to glue first

Before we say that the first thing to do is glue wallpaper or ceiling plinth, let’s get acquainted with existing species ceiling fillets:

The method of installing fillets depends largely on their weight. For example, products made from polystyrene foam and expanded polystyrene are very light, so they can even be glued to wallpaper. The only thing is that for this you need to follow a certain technology, which we will get acquainted with below.

Plastic products weigh significantly more, especially for massive models. Therefore, they must be mounted directly to the wall. Taking into account the above, we can answer the question of whether it is possible to glue the ceiling plinth to the wallpaper: if it is foam plastic, then yes, but if all other types, then no.

Installation nuances

On top of papered walls

First of all, let's look at how to glue a ceiling plinth to wallpaper, since this question interests home craftsmen most often.

In this case, you will need the following adhesives:

"Moment-montage";
Any other polymer adhesive;
Putty mixed with PVA.

Advice!
When choosing the best way to glue the ceiling plinth to the wallpaper, you should pay attention to the setting speed of the composition.
The higher it is, the better, since it’s difficult to hold the planks at arm’s length for a long time.

On the question of what to glue first: wallpaper or ceiling plinth, opinions differ. Fillet - - are needed to hide the gaps between the ceiling and wallpaper or other finishing materials on the wall. Yes, and they look very impressive. But there are some nuances to their installation.

Usually used for gluing to ceilings vinyl wallpapers and wallpaper for painting.

In order to decide what to do in this situation, it is necessary to consider the advantages and disadvantages of the options.

If you glue the fillets before the wallpaper, it will be easier to putty the joints of the baseboard and paint it, and you won’t be afraid to stain the wallpaper. But then it becomes difficult to fit the top edge of the wallpaper to the ceiling plinth. This must be done very carefully so that there are no gaps left.

On the other hand, if the wallpaper is already pasted, difficulties will arise with installing the baseboard. At least a day should pass after the wallpaper glue dries. Then the wallpaper will need to be covered with masking tape and glued, and then the baseboard will need to be painted.

First, the ceiling plinth is glued

The cut angles on both plinths, right and left, must be the same, i.e. their profiles must be identical.

As with any type of repair, you first need to take measurements and calculate the number of strips needed. The length of these planks is 2 meters. We round the perimeter of the room up and divide by 2.

The width of the skirting boards varies, so the choice should depend on the area of the room. If the room is small, then you need to take narrow ones, since wide ones will look bulky.

Tools and materials for installation:

ceiling plinth;
liquid Nails;
putty or sealant for filling seams;
pencil;
roulette;
rubber spatula;
miter box and stationery knife for trimming;
glue gun.

To the wall with putty or liquid nails. If you glue it on putty, it will fill the existing cracks and you will only need to remove its remnants.

Before gluing fillets, it is necessary to carry out preparatory work, namely the walls in the place where the baseboard will be glued, then putty it.

For gluing, a special glue is used, which is applied in a strip to the sides of the plinth adjacent to the wall and ceiling.

Nowadays there is a wide variety of ceiling plinths; you can buy narrow ones, they are more flexible and follow the topography of the walls. In the finished version, this will not be very noticeable, of course, if the wall defects are small.

Theoretically, the corners of the rooms should be 90 degrees, but in practice this is not always the case. Therefore, we first cut the corners of the plinth at 45 degrees using a miter box, and then adjust it on site. Ceiling plinth made of foam plastic can be cut very well with a stationery knife. You can join one plinth to another on the spot and cut it off.

After cutting it, you need to, and then just glue it.

The joints need to be sanded with fine-grained sandpaper. The glued plinth can be left as is, or it can be painted water-based paint in the same shade as the ceiling.

Return to contents

How to wallpaper

Wallpapering walls, like any other endeavor, requires certain skills. As a rule, professionals are not involved in this process, but are handled on our own. The final result – how the walls will look – depends on how the walls are prepared for pasting, what wallpaper is chosen, and what glue will be used.

Wallpapering tools:

For gluing, you can use two stepladders, which will be connected by a board at least 40-50 cm wide, or tables lined up in a row of the same height.

pencil;
scissors;
roulette;
painting spatula and knife;
roller for joints and fleecy;
glue tray;
a bucket for diluting glue;
soft cloth;
plumb line with thread;
table, stool or stepladder.

Before starting work, you must carefully study the instructions, since different types Wallpaper has its own rules.

The first thing you need to do is calculate the number of rolls. Now there are calculation tables, but they have large errors, so it is better to use the old method. Take an old roll of wallpaper with the width at which you plan to glue new wallpaper, and a tape measure. Then a measurement is taken along the perimeter from corner to corner, for walls with doors and window openings similarly. From one roll 10.05 m long you will get 4 strips with a wall height of up to 2.5 m. This calculation is applicable for wallpaper without joining the pattern, and with joining you will get 3 whole strips, the rest will be used over doors and windows.

A sponge or soft cloth will help smooth the wallpaper and remove air bubbles.

If necessary, the walls are leveled with putty, then a primer is applied. It is needed so that the glue is not absorbed by the walls and it is possible to easily combine the pattern on the canvases by moving the stripes. Instead of a special primer, wallpaper glue diluted to a more liquid consistency can be used.

When cutting wallpaper, make a small reserve; they are carefully cut with a stationery knife on the floor. If adjustment of the drawing is required, then you need to look at the instructions, where the offset step is indicated, but it happens when this step does not correspond. So you need to test it on the floor first.

Wallpaper glue is selected according to the type of wallpaper. For areas near windows and doors, you can use a PVA-based composition. Dilute glue in a bucket with cold water according to the instructions, stirring quickly with a brush or stick. Let the glue sit.

Excess wallpaper is pressed with a spatula and trimmed with a sharp knife.

When wallpapering, the windows should be closed and the sockets should be de-energized. You can start gluing wallpaper pasted at the joint from any wall. For training, it is better to start with the one that will be covered with furniture.

The vertical is marked when gluing the first strip with a rope and a weight. This strip is glued from the corner with a 1.5-2 centimeter approach to the other wall. After the strip is coated with glue, it must be folded in half for impregnation. At this time, the wall is coated with glue and the strip is attached to it. The collected air is dispersed with a clean cloth or rubber roller.

Ceiling plinths should not be glued directly onto glued wallpaper, as they need time to dry and are easily damaged. The fillets are glued using the technology described above.