Do-it-yourself homemade products for your garden and garden not only perfectly complement your garden plot, but will also help you save a decent amount of money. Today there are many useful devices for the garden that simplify everyday life. Usually gathers at the dacha a large number of unnecessary things and materials that people do not use in their apartments. it takes up a lot of space. Any summer resident has the opportunity, using his imagination, to make simple homemade items.
Garden tools
When visiting hardware stores, many buyers note that the quality of garden tools does not correspond to their cost. Even an expensive and high-quality shovel is very easy to damage. One of the options is to personally make some kind of country tool that can perfectly replace a regular one. bayonet shovel. for example, a garden digger, which is not only very easy to make, but also easy to use. If we compare an ordinary shovel and this country tool, it can be noted that it is much easier for the second to dig the ground, and it does not place heavy loads on the human spine.
Homemade digger
To make a digger for the garden with your own hands, you need those items that often lie and gather dust in the countryside. Must have:
- metal sheet 2 mm thick;
- metal pipe 0.5 inches in diameter;
- 2 bolts and 2 nuts;
- 2 engraver washers for the bolts and 2 hours of free time.
Needs to be cut a metal sheet into 7 segments, similar to stakes. That is, you should get a stake that is wide on one side and tapering to the other. Then, take a pipe 43 cm long and measure 5 mm from the edge. The following marks are made every 6 cm. Another 5 mm should remain on the other edge of the pipe, which should also be marked. Using grinding disc on a grinder, you need to make cuts in the marked places to the middle of the pipe.
The cut stakes are taken (they will act as legs), inserted into the grooves cut in the pipe and secured by welding. Then the remaining pipes are welded into a handle U-shaped and bolted to the workpiece. That's all, the digger is ready to use.
Garden decoration
We should not forget about the opportunity to become a designer of our own garden in the country. After all, you can make not only garden tools, but also much more. And to add some zest country house, you can post a beautiful and original garden path made of stone. Such a path will not only delight its owners, but will also become the latest trend, very popular among summer residents. For a stone path you will need:
- stone used to lay out the path;
- sand;
- gravel and board 25-30 mm thick.
Work should begin with a preliminary measurement of the distance of the future path. To do this, four pegs are driven in and connected in pairs with a guide rope. Afterwards, you need to remove upper layer soil, or in other words, dig a trench. When working with a shovel, one should not forget about the level of the trench, since it is better to make it even in depth. This will help not only to use correctly and economically Construction Materials, but will also simplify subsequent work. You need to install boards along the edges of the trench; they will act as sides into which sand and stones are placed.
First of all, gravel should be poured into the bottom of the hole. It will not only perform a shock-absorbing function, but will also provide indispensable assistance with drainage groundwater. Next, the gravel is covered with sand, which should be moistened in advance - this way it will lie more tightly. It is best to make a sand cushion with a thickness of 10 cm, and then you need to level the surface of the embankment with a board. Only after this can stone or paving stones be laid. It is necessary to calculate the thickness of the future path in advance so that you do not have to cut the stone again.
Mosquito traps
The invention fights not mosquitoes, but their larvae. It is suspended from tree branches. Mosquitoes lay their offspring in this device, which prevents the newly born mosquitoes from leaving it. For more effective fight with bloodsuckers you should make as many of these traps as possible. But even the use of this gadget cannot provide 100% protection from mosquito bites.
One of the most simple ways- This is to use an ordinary plastic bottle as a trap. Needs to be cut top part with the neck and insert it into bottom part so that the neck does not touch the bottom. Next, you should prepare a special solution that will attract mosquitoes. To do this you will need 15 g of yeast, 45 g of sugar and warm water. All 3 components need to be mixed and the resulting solution poured into the trap. Then, the bottle must be darkened. To do this, you can use a dark cloth or thick paper. This trap can attract not only mosquitoes, but also cockroaches. Therefore, the owners of a house in the village have the opportunity to use it in their living space.
These were just 3 of the most interesting and easily made devices for the garden and garden. Do not forget that a person can create something more useful and unique from available materials, you just need to give freedom to your imagination.
sadovod.guru
Homemade products for the garden and dacha: interesting ideas
For many, the private sector is associated with difficult permanent job. Plant a vegetable garden, monitor the growth of plants, and harvest. All this, of course, needs to be done. But if you organize the whole process correctly, then the work will be a joy. And there will still be a lot of free time for relaxation. And homemade products for the garden and dacha, made with your own hands, will help with this. Someone will object that everything can be bought ready-made in the store. This is true. But, firstly, there is not enough money to buy everything. And secondly, the process of making something useful from scrap materials can bring a lot of positive emotions.
Russian people have always been resourceful and inventive. AND great amount DIY homemade products for the garden and garden, photos of which can be found in our article, confirm this. We will offer for consideration only a few options that will be useful in any area.
Many gardeners have recently given preference to flower beds located in boxes. They are raised above ground level and fenced on all sides. This makes the maintenance process easier, and the garden bed looks more attractive and interesting. It is possible (or even recommended) to use such structures on soils poor in nutrients.
Homemade products for the garden involve the use of scrap materials. Therefore, to construct the box, you can use boards left over, for example, from building a house. If you don't have them, you'll have to purchase them at the store. A box of arbitrary dimensions is constructed from them. The dimensions will depend on the size of the plot, its style and the plant that is planned to be planted there. The height of the side is made approximately to the knee, so that the layer of fertile soil is thicker.
It is fixed to the bottom of the manufactured box metal grid with a small cell. It will provide protection against the penetration of rodents and moles. If there are none on the site, then you can do without a grid. You can easily make a small greenhouse from a box bed. Its height is selected taking into account the plants planted there.
Drip irrigation
Homemade products for the garden will simplify such a difficult process as watering plants. You can make a system drip irrigation. To do this, you will need a large barrel (metal or plastic), a hose, capillaries (you can make holes in the hose at a certain interval) and various connections(tees, clamps, etc.).
The barrel is raised approximately 1.5-2 m from the ground. To do this, you can weld a special stand from metal corners. Thanks to this, there will be stable pressure in the system. A main hose comes from the barrel. A filter must be installed on it so that debris does not clog the system. The capillaries are fed from the main hose.
DIY sprinkler
Homemade products for the garden and garden will allow you to create something necessary and useful on your site from improvised means and materials. For example, from old plastic bottles that are always thrown away, you can make a sprinkler for your garden. It will allow you to process and water plants of different heights. A sprayer is attached to the watering hose. The same spray nozzle is screwed onto a long stick (the longer the better). The lever is secured with a thread while pressed.
In a 1.5 liter bottle, a hole is made in the neck with a hot nail. A bolt is inserted into the hole and outside secured with a nut. The bolt must be drilled through with a drill. A hose is put on it and secured with a clamp. After applying pressure to the system, the nozzle spins and water is sprayed.
Tire compost bin
Old tires from passenger cars are one of the most popular and available materials for making homemade items for the garden. You can even make a compost pit out of them. You only need 4 of them.
One of the tires, which will serve as a base, is cut. One side panel is cut off from it. From the rest, two sidewalls are cut off to form rings. Next, you just need to install the tires on top of each other in the designated area.
Bench
After all the work in the garden, you can relax. And on this score you can also choose suitable option handmade crafts for the garden and garden. With a small set of tools and materials, you can make an attractive, streamlined bench. It will become a place where you can relax and unwind.
Materials you will need:
- A sheet of plywood (preferably pine) measuring 90 x 90 cm and 1.6 cm thick.
- There are 7 slats made of the same wood (2 cm thick, 9.4 cm wide and 140 cm long).
- Boards 2 x 6.9 cm and 100 cm long, 3 pcs.
- Boards 2 x 6.9 cm and 140 cm long, 9 pcs.
The parts will be held together with 0.5 x 5 cm self-tapping screws. In addition, glue will be useful for joining wooden elements, wood varnish, turpentine.
The plywood sheet is cut into three parts. A template is drawn on them for cutting out the side panels and the central crossbar. The shape is cut out with a jigsaw. On the back there are 3 recesses for slats that will hold the structure.
Homemade products for the garden will help make your country life more pleasant and easier.
fb.ru
DIY crafts for the garden and vegetable garden (39 photos). Pond from an old bathtub. Pallet bench. Rake hanger. Flower pots made from shoes
It's no secret that today almost any product for garden plot They are not cheap in stores. So, for example, purchasing various accessories will cost, as they say, “a pretty penny.” And if you make them “from scratch”, then you will spend no less, because starting materials you still have to buy it.
So why not save money and organize homemade projects for the garden with your own hands from what you usually have on hand or is inexpensive? Moreover, everything can be done really beautifully and neatly. And in addition it is also functional.
Crafts on the site
In this article we will look at the most useful homemade products with your own hands for the cottage and garden, which are distinguished by their simplicity and originality.
Beautiful “useful things” for the garden
One thing worth noting important point- you need to understand that only a small part of the list of crafts that can be made will be discussed. It’s just that these options are like a start, a “push” for imagination.
After all, here it is important to understand the very principle of how simple it is to organize everything, and then everything depends only on your imagination. So, let's begin the review.
Pond from an old bathtub
Pond from the bath
If you make a small reservoir of this type on a site, it will perform several functions simultaneously - we will familiarize ourselves with them in the table below.
Agree, the task is worth implementing. Moreover, for this you only need old bath, which in most cases is available on the site.
The pond is made according to this scheme:
- We dig a hole with our own hands in the right place, which, according to its parameters, should be slightly larger than the dimensions of the bathtub.
Pit design diagram
Advice: be as responsible as possible when choosing a location. It is not advisable to place a pond too close to dining table, For example. The fact is that various midges, bees, etc. may periodically flock to the water.
And brushing away insects during lunch is not very pleasant, as you understand.
- We lay several boards at the bottom of the hole - the bathtub will stand on them.
- We insert the bathtub into the hole and level it. We close its drain hole with a plug. In this case, it is advisable to treat the outer edges of the cork with silicone to prevent water leakage from the container in the future.
Leveling the bathtub
- We fill all the free space between the metal and the soil with earth.
Well, then all that remains is to decorate the structure. To do this, you can place it around the perimeter of the pond in the garden plot. beautiful stones or, for example, plant flowers. In addition, you can create an edging from boards or any wooden sheets or panels that are more or less resistant to moisture.
An example of board edging
As for filling the container, you can use it as water from central water supply, and natural flows. For example, you can bring the edge of the gutter of the house's drainage system to the bathtub and the pond will be filled with rainwater.
In principle, such homemade products for the garden can be slightly adjusted - use any tank, barrel, etc. instead of a bathtub.
Now let's look at another very convenient craft.
Pallet bench
Surely at some point you will want to sit in the garden - near artificial pond, For example. And then you will need one like this useful design like a bench.
Purchasing a new product is expensive. It is much easier to make a bench from a pallet - if it is not available, then, as a rule, a considerable amount of it is thrown away near large warehouses and factories.
The bench is made quickly.
- Make a cross cut on one side of the pallet to the left of the reinforcement bars.
Cut line
- On the other side, perform exactly the same operation, only on the other side of the bars.
Cut line on the other side of the pallet
- We divide the product into two parts.
Dividing the pallet into two halves
- We insert blocks of bars between the boards, as shown in the figure below. We get the back and seat.
The principle of connecting halves
- We fasten the wood with self-tapping screws at all connecting points.
Fixation points
Photo of the lining under the bench
As you can see, everything is quite simple. Now you can paint the bench and install other homemade items for the garden and dacha.
Now let's look at a very functional, original and cheap craft.
Rake hanger
A hanger is a very necessary element. After all, you can hang not only clothes on it, but also a considerable part of various garden tools.
Of course, the “primitive” version of this design is ordinary nails or self-tapping screws. However, it looks rather unattractive, and besides, the nails tend to gradually loosen inside the holes into which they are driven.
And loosening means that such “hooks” will periodically fall to the ground. We offer a more original and reliable solution - to make a hanger from an old rake.
Rake hanger
You only need their metal part, without wooden handle. Even if such an element is not available in barns, purchasing it at the nearest market is not a problem. The price of the rake is acceptable for everyone.
The hanger is mounted like this:
- We tie the wire to the two edges of the line on which the teeth are attached. In this case, there should be only one piece of wire. That is, it turns out that the fastener, in fact, resembles how paintings or mirrors are hung on a string.
- On the wall or anywhere Right place We drive a large nail and hang a rake on it.
The hanger is ready - you can hang anything you like on the rake teeth: shovels, caps, etc.
Now let's use old shoes, of which there are usually a lot at the dacha.
Flower pots made from shoes
The ideal option is to have rubber boots, but in principle ordinary leather shoes will do.
Shoe pots
From such shoes you can make custom flower pots that will fit perfectly into the style of almost any garden.
The workflow here is like this:
- We nail or screw the boots to the fence or any other suitable plane.
- We fill each boot with soil.
- We make several holes in the soles - they are needed to let out excess water.
- Plant flowers in pots and enjoy appearance inventions.
An example of pots made from boots that are suspended from an arch
Note! Any DIY garden crafts can be “improved” ad infinitum. The main thing in this matter is to correctly organize the “basic” thought, idea.
And you can decorate the invention with anything and however your heart desires - there are no restrictions.
Remember this simple rule when planning “benefits” for your garden or vegetable garden.
This concludes our review of useful and original crafts for a garden plot and summarize the article.
Conclusion
As you can see, gardener’s homemade products are quite simple, and they can be made from almost anything. We hope that this article will become a catalyst for your ideas and you will be able to decorate your area beautifully. Well, if you want more information on this topic, we recommend watching the video in this article.
Add to favorites Printable version
9dach.ru
Homemade products for the garden / Samodelka.net - Do it yourself with your own hands | Homemade products. Useful tips and recommendations for the home craftsman
101 readers, 162 topics
Everything related to cottages, gardens, vegetable gardens and country houses. Tips on growing plants, making garden tools, homestead construction, etc., etc.
A dacha is a place for resting the soul and healing the body. Far from the bustle of the city, where the air is clean, it’s so nice to actively spend time, grow excellent harvest. And having worked enough, have a good rest!
But to relax in comfort, you need to work a little to create beautiful, useful and comfortable things. Do-it-yourself homemade products for the garden and garden - cheap, reliable and cheerful!
Furniture made from wooden pallets (pallets)
After the construction of the house there is a lot left construction waste, which may come in handy! Brick and wall blocks delivered on pallets. They are returnable packaging, but I don’t want to bother with this issue. With a minimum of effort you can make something original wooden furniture for the dacha!
Look at this stylish coffee table for the living room. Do you recognize? This is an ordinary pallet! Making such an interior item is not difficult. Take coarse sandpaper and sand the surface of the boards from which the container is made. Then you will need finer sandpaper to make the surface smooth. After sanding, carefully wipe off the fine dust consisting of particles of removed wood.
Paint yours new table oil, acrylic or other wood paint. If the pallet was made from decent boards and you like the natural texture of wood, then it is better to varnish the table. For convenience, you can screw small wheels on the bottom.
More complex products are also made from this container - sofas, chests of drawers, cabinets. Check out some photos for inspiration.
Agree, this is a chic and stylish set! If you make soft seats yourself, sew ribbons from the same fabric to the bottom of them to tie them to the frame. Otherwise they will move.
The bed and its large headboard with shelves are also made from pallets. Good orthopedic mattress will allow you to get a good night's sleep even on such an original basis.
Such a recreation area under open air in oriental style will not leave anyone indifferent.
Swing
Do you have children in your family or do you have guests with children? Then you can’t do without a swing! To avoid spending a lot of money, you can use unnecessary things.
For example, you can make an excellent swing seat from an old chair in a matter of minutes by sawing off the legs. And to make it beautiful, paint it with fresh paint.
By the way, not only children love to swing. Adults also enjoy it. Look at this version of a swing made from a rattan chair, the legs of which have become unusable. Soft pillows delicate flowers, ribbons, lace fabric - everything to create a romantic atmosphere.
If there is any in the garden big trees, you can hang such a structure on a thick branch, then you don’t need to build complex fastenings, a strong rope will be enough.
Second life of an old bath
There are many possible options. Here are some of them.
Flower garden. One of the easiest ways to use up an unwanted bathtub. Enough to do at the bottom good drainage from broken bricks or expanded clay, add a nutrient substrate and plant the plants.
Water. The easiest option is to bury the bathtub in the ground and pour water into it. But you can decorate it in such a way that no one will guess what you built your pond from at the dacha. Small fountain, a natural stone for framing, lighting and favorite plants will help create a unique relaxation corner on the site.
Furniture. Yes! It’s hard to believe, but the bathtub makes excellent furniture - sofas and armchairs. And don’t worry if your bathtub is cast iron. Using a grinder, you can cut out part of the side to make a sofa or armchair.
Flower beds
Flower beds can be decorated in a very original way.
Vertical gardening with colorful rubber boots. Make drainage holes in their soles excess water and arrange drainage from expanded clay. Fill your shoes with soil and plant the plants. Remember that any container that is not buried in the ground quickly heats up in the sun, and the soil in it dries out. Therefore, on hot days, water your green pets at least 1-2 times a day.
You can also use other shoes.
If there is an extremely unattractive stump from an old tree on your property that you cannot uproot, do not be discouraged. It makes a great raised flower bed.
Some gardeners love their stumps decorated with plants so much that they even coat them with varnish to slow down the process of destruction.
Instead of a stump, a picturesque log can serve as a base.
Flower beds can be arranged in various used things - suitcases, bags, furniture, tires and even in a car!
Try to make it elevated warm bed, framing it neatly wooden frame, stone or brick.
From plastic bottles
An excellent material for DIY projects in the country and in the garden are plastic bottles. They may perform useful functions or be decorative element for landscape decoration.
Spray Bottle – indispensable assistant in the garden. Make it in a container large holes, put it on the pipe or hose with the neck and secure it. All that remains is to open the tap to let the water flow.
Using a bottle, you can organize root watering for plants. Make holes in it. To prevent soil from getting into the holes, put old polyamide tights on the container. Dig the bottle so that the neck remains above the ground. You will pour water there from a hose or it will fill itself when it rains.
This method of watering will not incur financial expenses at all, but will bring tangible benefits. Water will flow from the bottle gradually in small portions, without getting onto the above-ground parts of the plants. And this is very important for many fruit and ornamental green pets: tomatoes, cucumbers, zucchini...
Having filled the bottles with water, you can safely go to the city for a week, and the plants will not suffer from drought. The water still has time to warm up before it reaches the roots.
Frame flower beds and beds with glass or plastic bottles.
It looks neat and has practical benefits. If you bury the bottles in the ground, they will become a barrier to the spread of roots perennial weeds. And if most of the container remains on top, then you can pour soil inside the perimeter and the flowerbed or bed will be slightly raised. It will be easier to care for her.
Durable, wear-resistant brooms are made from plastic bottles. They look attractive thanks to their bright colors.
DIY crafts for the garden and garden with your own hands bring special comfort to your personal green corner. They are pleasing to the eye, serve as furniture or are assistants in the struggle for the harvest. They also protect you from all kinds of adversity. After all, it is known that things made with your own hands have special power.
Let your dacha be hospitable at any time of the year!
DIY drawings for a summer house and vegetable garden will be useful to everyone. A dacha is the ultimate dream of, if not every average person, then certainly every second person. Not everyone, of course, will be lucky enough to become the owner of suburban area, but those who are still lucky need to constantly monitor and improve it, which requires considerable expenses. Do-it-yourself homemade products for your dacha and garden help you keep your dacha in impeccable condition. Today we will tell you a few secrets on how to save money on buying the necessary things for your garden and make them at home. Of course, not everyone can make a grader with their own hands or self-propelled guns for a tractor, but most of the homemade products will definitely come in handy on the farm.
Do-it-yourself variator for a machine
If you need to constantly work at the machine, then frequent changes in speeds lead to wear on the unit and have additional disadvantage, which involves stopping the device regularly. As alternative option you can use a homemade variator for the machine. It can be made from wood with your own hands, without significant investment of time and money. The variator cones are made from hard wood, and you don’t have to use a lathe to make them; you can cut them at an angle using a jigsaw, equal to the angle cone inclination.
If you assemble a cone from disks, then you must glue them together or nail them. The finished cones are seated deep on metal rods and secured with screws. In order for the belt to move evenly on the machine, roller guides are required. The videos can be taken from furniture fittings, but if they are not available, you can use ordinary bearings.
An old washing machine is a real treasure
If there is a working engine from washing machine, then this is a very valuable find, since many useful household devices can be made from it. The easiest way is to use an engine from a washing machine to make an excellent sandpaper for sharpening knives, different instruments and drills.
The main problem in making the device is attaching the sharpening stone to the engine body itself. In most cases, the whetstone has a hole that does not fit the motor shaft. That is why you need to make a flange that, on the one hand, can be pressed onto the shaft, and on the other, will have a thread, which will allow you to screw in and secure the grinding wheel.
Image 1. Making emery from an old washing machine engine.
Experienced craftsmen recommend that beginners use old pieces of pipe 32 mm long and no more than 20 cm long as a flange. On one piece of pipe we make a thread whose length should be 2 times the thickness of the grinding wheel. The other end of the pipe is heated with a soldering iron and placed on the shaft. To better hold the pipe, it can be bolted together. After this, take 3 nuts and screw them onto the flange from the thread side until it stops, then put on the washer and, finally, the grinding wheel, then the washer again, and secure with a nut. At the end you can also add a lock nut.
The hardest work is done, after that all that remains is to fasten the motor, but this is a very individual procedure, since it is not known what holes are available on the motor from your washing machine for fasteners. Based on them, you need to make a stand; it is best to use small corners, fastening them together and placing the emery on the workbench. The final step will be connecting the engine to the electrical network. Look at ready-made option You can see the sharpeners in the photo, drawings are also included (image 1).
Image 2. Grill from a washing machine drum.Homemade items for the dacha can also be made from other parts of the machine; for example, a drum can make an excellent kebab maker. Drum in washing machines They are made of stainless steel, which in itself is important, since the body is very strong and reliable. It’s very easy to make homemade items for a summer house from a drum; you just need to remove it from the machine body, but together with the shaft and pulley. We put the pulled out drum with the hatch on top and the wheel down. Now the brazier is ready, with the help of a grinder you can, of course, trim the front of the drum or the sides to make it more convenient to throw firewood, but here everything depends on your free time and imagination. This makeshift brazier looks very neat, with the drum dotted with small holes, which allows air to be evenly distributed over the coals and provide the necessary heat (image 2).
Hand-held circular saw from a grinder
Image 3. Diagram of a circular saw.The circular at the dacha is very useful thing, few people know, but it can be made from a grinder. You only have 2 elements left to complete: the sliding stop and the axial handle. After this, you will be able to use your circular saw from an angle grinder at any time.
2 small pieces of metal angle are suitable as a sliding stop. The edges of the corner are rounded so that they do not catch the part during processing. The corners are connected to each other at the back and front using bolts or nuts. A clamp made of metal tape must be placed on the body of the above-mentioned power tool. A folded strip of sheet metal or galvanized steel with a hole for the rear bolt of the sliding stop is attached to the screw tie of the clamp, which will be located below.
In the grinder gearbox we make 4 small holes for M5 bolts. For convenience, the gearbox can first be disassembled to better see where the hole can be made. These 4 holes are needed to attach the handle. The handle can be made from ordinary metal tube. This completes the manual version of the grinder saw; if you want to make a real stationary version of the circular saw, then you will need more work skills, tools and well-calculated drawings (image 3).
Agricultural equipment and devices
Agricultural machinery is very important tools in the country, without which not a single owner can do. Agricultural equipment today costs a lot, and you don’t really want to spend a lot of money on something that is rarely used, but at the same time you can’t do without it. One of the most popular devices is a wheelbarrow; it can be made from improvised means, thereby saving a lot of money. To make it you need:
Image 4. Drawings of a homemade cart.- wheel, preferably made of rubber;
- plywood;
- 2 corners;
- wooden block, 3 m long;
- nuts and axle from a bolt.
Manufacturing method of this instrument for a dacha is very simple and will be understandable even to a novice master, the main thing here is to measure everything clearly, because if you do it by eye, it will turn out crooked. Drawings of the wheelbarrow are attached (image 4).
No less popular tool for summer cottage, which in winter time will help get rid of snow, that is, a shovel can also be made from plywood. You will need:
- plywood 10-12 mm thick;
- wooden stalk;
- nails;
- steel plate 4-6 cm wide.
The plywood will serve as a shovel bucket, and the timber will allow you to hold the handle. Metal is used to edge the front and back parts of the plywood - the future bucket.
To cultivate a garden, a rake is often required. To make them you will need a wooden block 35 by 35 mm. The length of the handle can be adjusted at your discretion, but it is not recommended to make it too long, as it will be difficult to use. In addition to the bar and handle, you need to make at least 4 metal teeth. The metal must be strong so that it does not bend to the ground during operation. You can use metal from an old shovel and cut the teeth with a grinder. The teeth are aligned with a hammer and holes are drilled for the screws. Then the structure is fastened.
Video about making a cart with your own hands:
Design of a sprinkler for a vegetable garden
Homemade agricultural equipment also includes sprinklers for the garden, which can be made practically from waste that is found in everyone’s home. To irrigate your garden you will need:
- spray;
- rubber hose 3-4 m long;
- plastic one and a half liter bottle;
- pump;
- a wooden or metal stick of any length, but the longer the better.
The sprayer is screwed to the stick with the top nozzle so that the lever is pressed using nylon threads. Wrap it tightly so that the sprayer does not move. After this, take a plastic bottle and use a hot nail to melt a hole in the neck. Then we push the bolt into the molten hole and secure it with a nut on the outside.
Before inserting the bolt, drill a through hole in it with a simple 3 mm metal drill. The hose is put on the bolt and secured with a small clamp using a screwdriver. We attach the second end of the hose to the pump and again secure it with a clamp so that everything is sealed.
The bottle contains poison for spraying beetles or water for watering crops. Screw the container to the top of the spray bottle, which is attached to a stick. Next, with the nozzle closed, we pump up the pump a little, after that we unwind the nozzle, and the sprayer starts working. In this way, you can spray trees of any height and large beds; if necessary, you can simply place the device on the ground and pump up the pump from time to time.
You can even do it at the dacha small greenhouses made of film, you only need to drive a metal rod or stick into the ground and secure the plastic film in the form of a cone to the base.
Video about a drip irrigation system using a plastic bottle:
The film is secured from below in a circle from old barrel or adjusted with stones.
Conclusion on the topic
Now you know how to make expensive tools for a summer cottage without significant expenditure of money, time and nerves. The main thing is not what you use to improve your plot, but that you should like the work and being at the dacha should bring joy.
Homemade products for the dacha are a special source of pride for the zealous owner. Not everyone can be smart and practical. But many people can take note and turn someone’s useful experience into a masterpiece.
Original flower bed from car tires
Used tires are a popular material for transforming landscapes and practical structures.
Tire flower beds
Such homemade products for the dacha and garden have gained the greatest popularity. At the same time, classic single flower beds faded into the background. Currently you can see the following options:
Such DIY home and garden projects will take their rightful place in any landscape.
Children's playgrounds made from tires
Grandchildren and children are frequent guests at the dacha. Therefore, they will appreciate the efforts of adults who decided on which to place:
Options for playgrounds made from tires - and cartoon characters made from tires. Bright little animals made from tires will be a special source of pride in front of your friends and neighbors.
- Swing. You can find from ordinary hanging models to rocking chairs made of a semicircle with a board installed instead of a seat.
- Cars, motorcycles. Different diameters wheels allow you to assemble original racing cars and bikes. Any boy will feel like a real racer and will appreciate the efforts of adults.
- Furniture. Chairs and tables for children's playgrounds and impromptu banquets are the dream of any little lady.
Read also
Heating greenhouses in winter
Do-it-yourself crafts for the playground will provide active, interesting summer for a child.
Useful crafts from tires
Tires are often used for the following structures:
Rubber crafts and homemade items for the garden are popular due to the availability of available materials and a wide range of applications.
Useful homemade products from plastic bottles
Another popular material for design and practical research. Useful homemade products from plastic bottles are widely used for country life:
Practical DIY crafts for a summer cottage made from plastic bottles have become widespread due to the high availability of the material and ease of processing.
A summer cottage is an area where you can give yourself the freedom to conduct numerous experiments and dream to your heart’s content. This manifests itself not only in interior design, but mainly in the design of a garden or vegetable garden. Inquisitive and inventive owners have long been no longer guided by expensive and standard methods for arranging their plots, since there are a lot of alternative solutions for virtually all areas of activity.
There are several types of vertical beds that allow you to optimize the use free space. Non-standard designs – a great opportunity create interesting design garden, vegetable garden, summer cottage.
This type of beds is in most cases used for growing ornamental plants or herbs.
Materials for production:
The length of the drainpipes is adjusted in accordance with the wishes of the owner of the site. However, you should not make bulky beds, as they can complicate movement around the area.
Creating a bed
Stage 1. Create a container. To do this, take a drainpipe, cut it in half lengthwise and put special plugs on both sides.
Stage 2. We take the prepared metal holders and put them on the resulting frames for the beds.
Stage 3. We make holes in the pipe. They are made in those places where metal fasteners will be located.
Stage 4. We pass a cable or strong rope through the holes made.
Stage 5. Fix the cable/rope using fasteners.
Stage 6. Fill the resulting beds with expanded clay and soil.
Stage 7. Plant the plants in the beds.
Stage 8. We hang the pipes to the selected location. Sometimes a special wooden crossbar is installed for this purpose, or rather a structure in the shape of the letter “P”.
Step 9: Alternatively, a special design can be made for the pipes.
Important! A bed made of drainpipes is not resistant to strong gusty winds, so you should choose a place for it that is not blown from four directions by winds. Otherwise, the frame will quickly collapse, nullifying all your efforts.
A garden bed made from plastic bag, is another modification of vertical beds. It is extremely compact, functional and interesting in appearance. You can make such a bed in a couple of hours.
Materials for production:
- durable polyethylene film;
- sewing machine;
- priming;
- seedling.
In order for the bed to be strong, it is recommended Special attention pay attention to the thickness of the polyethylene film, which in this case will act as the “frame” of the structure. Minimum thickness films - 0.2 millimeters.
The process of creating a polyethylene bed
Step 1 . We cut out 2 rectangular pieces of film, the size of which corresponds to the size of the bed being created. An allowance of one and a half to two centimeters should be left on each side. The recommended diameter of the bed is twenty centimeters.
Step 2. Sew the rectangles together, leaving only the top part of the bag unconnected.
Step 3. We sew a handle to the future bed, the strength of which will allow it to withstand the weight of the bag filled with soil. It should also be taken into account that when watering the weight will increase.
Step 4. Fill the bag with fertilized soil.
Step 5. We make horizontal cuts on the bag in increments of twenty centimeters. They are necessary in order to plant seedlings in the garden.
Step 6. Plant seedlings.
Step 7. Regularly water the soil and add the necessary fertilizers.
With these simple steps you can get a cheap and useful garden bed.
An integral element of every summer cottage is a compost heap. This is the place where all sorts of biochemical reactions take place to create fertilizers.
To create fertilizers that will satisfy all the requirements placed on them, several key steps should be carefully considered: creating the container and directly correct production the compost itself. Let's talk about each of them in more detail.
Stage 1. Take eight support posts of the same length.
Stage 2. Process the lower part wooden posts motor oil or tar.
Stage 3. We dig the posts into the ground so that they are reliable and stable. If compost bin will be located next to the fence, then 4 posts (that is, one side) can be attached to the fence. This will avoid having to dig 4 holes.
Stage 4. Between each two adjacent posts we nail the crossbars so that we end up with three independent sections. Be sure to leave gaps that will serve as ventilation holes.
Stage 5. In two sections, we nail the boards horizontally to half the height of the pillars. In these places it is planned to create two small doors.
Step 6. The remaining section will have a large door, so only one board should be nailed. It should be located at the very bottom in a horizontal position, that is, like a regular crossbar.
Stage 7. Install the covers. To do this, you can use one large solid board.
Stage 8. Install the pre-prepared doors.
Stage 9. We provide the doors with handles and latches.
Stage 10. We process the wood using special impregnations.
Stage 11. Paint the box in any color that suits your preferences.
Many gardeners mistakenly believe that any components can be dumped into a compost heap. In reality, to create the right biofertilizer, the “ingredients” must be carefully selected.
Among the required components compost heap the following components:
- peat;
- ash;
- needles;
- tree branches;
- leaves;
- hay or grass;
- wood ash;
- plant roots;
- raw vegetables and fruits, etc.
All elements are randomly mixed in a heap. To speed up chemical reactions It is recommended to cover the pile with a tarpaulin (this is especially true if there is no box).
Trips to the dacha with the family require the presence of entertainment elements on the site that will delight children. The most common way to keep young summer residents occupied is a swing.
Building a swing yourself is not an easy task, but it is quite doable. Of course, you can always take a stick, tie it with a rope and hang the structure on a tree, but this can hardly be called a full-fledged swing. Real craftsmen prefer to build convenient designs with a comfortable seating area.
Structural components:
- two logs;
- strong rope.
Indicators:
- log diameter – 85 mm;
- log length – 700 mm;
- distance between ropes – 500 mm.
Making a swing
Stage 1. We stretch the ropes between the logs.
Stage 2. Wrap ropes around each log.
Stage 3. Let the ropes out.
Stage 4. Tighten the ropes to 3 knots.
Stage 5. Attach the swing to the tree.
Important: this swing is designed for only one person.
Garden path from scrap materials
There are several types of garden paths that you can easily make with your own hands.
Step 1. Remove the sidewall from the tire using a knife or saw.
Step 2. Cut the tires.
Step 3. Line the space with corrugated stripes.
Step 4. Paint the path with paint.
Step 5. Sprinkle with stone chips.
This economical option for those who don’t want to rack their brains and waste time on a full-fledged garden path. Tire paths are usually used for vegetable gardens, as they are easily laid in the ground.
Stage 1. Paint the corks in different colors.
Stage 2. Dig a small trench.
Stage 3. We drive in supports to strengthen the future path.
Stage 4. We construct the formwork using boards.
Stage 5. Install spacers along the edges of the trench.
Stage 6. Place crushed stone deep into the trench and compact it thoroughly.
Stage 7. Make a solution from sand, cement, glue and water.
Stage 8. Pour the solution into the trench.
Stage 9. Press in the plugs in random order. Smooth multi-colored stripes look interesting.
These are the simplest and quick ways make a garden path without purchasing expensive materials.
DIY tools
The expression “everything is useful on the farm” turns out to be more relevant when we're talking about about canisters. From this plastic container you can make a large quantity indispensable tools, which are actively used in the process of dacha work.
To make this tool we only need sharp knife and the container itself.
Stage 1. Cut off the bottom of the canister.
Stage 2. Mark a cut line for the scoop on the container so that the handle of the canister is the handle of the future tool.
Stage 3. Cut off excess material.
As a result of these simple steps, we get an excellent scoop with a comfortable handle.
Materials:
Manufacturing
Step 1. Wash the canister thoroughly so that no odor remains in it.
Stage 2. Cut the canister vertically into two parts.
Stage 3. We make a groove on the board using a woodworking machine.
Stage 4. Apply glue to the plywood and insert it into the bottom of the canister.
Stage 5. Paint the resulting shelf using a spray can.
Of course, this design will not withstand a lot of weight, but it is quite suitable for storing small parts.
Materials:
- 40 cans;
- scissors;
- rope;
- paper;
- marker.
Stage 1. Pierce the top of the canisters with a knife.
Stage 2. Make a stencil from paper.
Stage 3. Apply it to the canister and outline it with a marker.
Stage 4. Cut out large holes using scissors.
Stage 5. We stack the prepared canisters in several rows, tying each row by hooking a rope under the handles of the containers.
Stage 6. We tie all the rows around the perimeter for greater strength.
Stage 7. If you plan to lean the cabinet against the wall, then drill it to the surface.
Stage 8. Place heavy objects - stones or bricks - in the bottom row.
The result is a fairly spacious and functional rack that will help get rid of the problem of storing many small parts.
Be resourceful and bold in implementing your ideas. Good luck!
Video – DIY crafts for a summer cottage
Video - We do it ourselves for the dacha