Assistant driller for production and exploration drilling, etc. Assistant driller for production and exploration drilling of oil and gas wells (first). Studied with us: Training of galvanizers

Characteristics of the work.

Maintenance of electrical equipment, sectional electrical cables, electric drills using telemetric systems, telemonitoring of well drilling and other types of electrical equipment on drilling rigs when drilling wells for oil, gas, thermal, iodine-bromine waters and other minerals. Inspection and testing of the electric drill, current collector, current supply and elimination of their malfunctions. Setting up an automatic regulator for feeding the bit to the bottom and an electric drill control station. Changing cable sections in drill pipes, working rod, submersible electromagnetic contactor, safety working sub. Observing the correct technical operation current supply, electric drill using telemetric systems, pantograph, operation protection device, electric drill using microcircuits and other special ground-based electrical equipment. Measuring the insulation value of an electric drill, monitoring oil pressure. Pumping oil into an electric drill. When lowering the drilling tool, cleaning contact connections and measurement of current lead insulation. Adjustment of the operating downhole motor (electric drill) using a voltage transformer depending on the depth of the well. Maintaining a logbook and recording the consumption of special materials to ensure uninterrupted operation when drilling with an electric drill. Management of the change of an electric drill, the installation of insulation monitoring devices and a ring current collector, the work of electricians in the maintenance and repair of electrical equipment on drilling rigs, the installation and dismantling of electrical equipment, including special electrical equipment for drilling wells with an electric drill using telemetric systems and telecontrol of well drilling.

What you should know:

technological process drilling wells for oil, gas, thermal, iodine-bromine waters and other minerals
basics of electrical engineering
device of electric motors of constant and alternating current, transformers, electric drills of all types, current supply and all special electrical equipment
electrical diagrams and specifications serviced installations and mechanisms
control circuit for an electric drill and an automatic bit feeder
drilling rig power supply and lighting diagram
operating instructions for electric drill, current supply
design and operating principle of the built-in orientation apparatus for drilling inclined wells and instructions for the operation and maintenance of this apparatus
technical rules for installation, repair, inspection and operation of drilling electrical equipment, overhead and cable networks
grounding device and its purpose
ways to improve power factor and ensure effective use electricity. When drilling wells up to 1500 m inclusive - 4th category
when drilling wells over 1500 m - 5th category.

Must know: technological regulations on well drilling technology, production organization; basic information on the geology of deposits, the technological process of extraction of oil, gas, thermal, iodine-bromine waters and other minerals; technological process and types of work for developing production and testing exploration wells; purpose, design and technical characteristics of the equipment, mechanisms, tools used, rules of their operation. When drilling wells with MODUs - the design and purpose of surface and subsea equipment used when drilling offshore wells; technology for development and testing of offshore wells; design and technical characteristics of the equipment of the PBU drilling complex; methods of equipment for the traveling system; rules and lubrication chart for drilling equipment; tools and devices for drilling directional wells; standard sizes of bits, drilling, casing and tubing pipes; rules for preparing casing pipes for lowering into a well; device design and methods for determining the parameters of drilling fluids; methods of preparation, processing and purification of drilling fluids; basic physicochemical characteristics drilling fluids and chemicals; drilling rig diagrams and operating rules for blowout prevention equipment; purpose of small-scale mechanization devices and instrumentation used; ground equipment for fountains and pumping wells; orders, instructions and other governing documents ensuring labor safety when drilling wells; Charter of service on sea vessels.

When drilling wells up to 1500 m deep inclusive - 4th category;

when drilling wells with a depth of over 1500 m to 4000 m inclusive - 5th category;

when drilling wells over 4000 m or from floating drilling rigs (FDU) -. 6th category.

For an assistant driller for production and exploration drilling of oil and gas wells (second) of the 5th and 6th categories, secondary vocational education is required.

PROFESSION - ASSISTANT DRILLER FOR PRODUCTION AND EXPLORATION DRILLING OF OIL AND GAS WELLS (FIRST)

QUALIFICATIONS:

4 DIAGRAM- when drilling wells up to 1500 m deep

5 DISCHARGE- when drilling wells with a depth of over 1500 m and up to 4000 m inclusive, as well as directional and horizontal wells, regardless of depth

6TH DISCHARGE- when drilling wells with a depth of over 4000 m and up to 5000 m inclusive

7 DISCHARGE- when drilling wells with a depth of over 5000 m or from floating drilling rigs (FDU)

For an assistant driller for production and exploration drilling of oil and gas wells (first) of the 5th, 6th and 7th categories, secondary vocational education is required.

CHARACTERISTICS OF THE WORK

Maintaining individual species works of the technological process of drilling wells for oil, gas, thermal, iodine-bromine waters and other minerals using deep drilling installations under the guidance of a driller. Preparation for the launch of the drilling rig and horse work during hoisting operations. Participation in work on laying drill pipes and casing, assembling drill pipes, pressing drill pipes. Control of automatic hoisting operations. Checking the condition of the tower, traveling system, flight ladders. Working with a machine key. Preparation and processing of drilling fluid. Filling reserve containers with solution. Observation of changes in the level of the solution in receptions. Starting, stopping mud pumps and monitoring their operation. Determination and elimination of malfunctions in the operation of mud pumps. Replacement of worn parts of mud pumps. Carrying out work to eliminate complications and accidents, work on cementing casing strings in a well, installing and drilling out cement bridges, equipping a wellhead, developing production and testing exploration wells, laying drilling and casing pipes, assembling and testing drill pipes, carrying out final work on the well , preventive maintenance of drilling equipment, participation in the installation, dismantling and transportation of drilling equipment.

Assistant driller for production and exploration drilling of oil and gas wells (first) MUST KNOW:

Unified technical rules for conducting drilling operations; information on the geology of deposits and the technological process of extraction of oil, gas, thermal, iodine-bromine waters and other minerals; technological process and types of work for developing production and testing exploration wells; purpose, design and technical characteristics of the equipment, mechanisms, tools used, rules of their operation; methods of equipment for the traveling system; installation of flight stairs, floors, devices for installing candles, crane block platform; rules and lubrication chart for drilling equipment; tools and devices for drilling directional wells; standard sizes of drilling and casing pipes; rules for preparing casing pipes for running; instruments for determining the parameters of drilling fluids; design of the solution preparation unit; wiring diagrams for circulation systems and lines high pressure; methods of preparation, purification and regeneration of drilling fluids; basic physical and chemical properties of drilling fluids and chemicals; installation diagrams of blowout prevention equipment; purpose of small-scale mechanization devices and instrumentation used.

27. Assistant driller for production and exploration drilling of oil and gas wells (second)

Characteristics of the work. Participation in the technological process of drilling wells for oil, gas, thermal, iodine-bromine waters and other minerals using deep drilling installations. Start-up of a drilling rig under the guidance of a driller for production and exploration drilling of oil and gas wells (second). Performing horse work during hoisting and hoisting operations. Participation in work on laying drill and casing pipes, assembling the bottom of the drill string, and pressure testing of drill pipes. Preparation and processing of drilling fluid. Starting, stopping mud pumps and monitoring their operation and changes in the level of flushing fluid in the receiving tanks of mud pumps. Determination and elimination of malfunctions in the operation of mud pumps, replacement of worn parts of mud pumps. Participation in work to eliminate complications and accidents, cement casing strings in a well, install and drill out cement bridges, wellhead equipment, develop production and test exploration wells. Carrying out preventive repairs of drilling equipment, final work on the well. Participation in the installation, dismantling and transportation of drilling equipment when the team moves with its block. When drilling offshore wells from floating drilling rigs (FDUs) - participation in work to disconnect from the wellhead in extreme situations (hydrometeorological, technical).
Must know: technological regulations on well drilling technology, production organization; basic information on the geology of deposits, on the technological process of extraction of oil, gas, thermal, iodine-bromine waters and other minerals; technological process and types of work for developing production and testing exploration wells; purpose, design and technical characteristics of the equipment, mechanisms, tools used, rules of their operation. When drilling wells with MODUs - the design and purpose of surface and subsea equipment used when drilling offshore wells; technology for development and testing of offshore wells; design and technical characteristics of the equipment of the PBU drilling complex; methods of equipment for the traveling system; rules and lubrication chart for drilling equipment; tools and devices for drilling directional wells; standard sizes of bits, drilling, casing and tubing pipes; rules for preparing casing pipes for lowering into a well; device design and methods for determining the parameters of drilling fluids; methods of preparation, processing and purification of drilling fluids; basic physical and chemical properties of drilling fluids and chemicals; drilling rig diagrams and operating rules for blowout prevention equipment; purpose of small-scale mechanization devices and instrumentation used; surface equipment for flowing and pumping wells; orders, instructions and other governing documents ensuring labor safety when drilling wells; Charter of service on sea vessels.
When drilling wells up to 1500 m deep inclusive - 4th category;
when drilling wells with a depth of over 1500 m to 4000 m inclusive - 5th category;
when drilling wells over 4000 m or from floating drilling rigs (FDU) - 6th category.
For an assistant driller for production and exploration drilling of oil and gas wells (second) of the 5th and 6th categories, secondary vocational education is required.

From July 1, 2016, employers are required to apply professional standards, if the requirements for the qualifications that an employee needs to perform a certain job function are established Labor Code, federal laws or other regulations ( the federal law dated May 2, 2015 No. 122-FZ).
To search for approved professional standards of the Ministry of Labor of the Russian Federation, use

The release was approved by the Decree of the Ministry of Labor and social development Russian Federation dated November 14, 2000 N 81

Driller assistant overhaul wells

§ 39. Assistant driller for major workover of wells

Characteristics of work. Participation in the management of the technological process of well overhaul. Participation in the installation and dismantling of lifting systems. Participation in preparatory work for carrying out major repairs of wells, performing overhead work on installing tubing and drill pipes; monitoring the operating parameters of flushing pumps; suspension of car keys and installation of automatic keys; monitoring the circulation system and cleaning it from sludge; participation in checking and lubrication of equipment and tools; participation in work on equipment and re-equipment of the traveling system. Performing work on installing pipes by a finger or laying them on walkways when lowering and raising drilling and tubing pipes. Participation in pipe measurement. Monitoring the serviceability of the traveling system. Preparation of keys, elevators, automatic screwing and unscrewing of pipes and rods for hoisting operations. Monitoring the serviceability of flight stairs and floors. Participation in the preparation of tamponing mixtures and chemical reagents, in carrying out acid and hydrothermal treatment of wells, in carrying out fishing, research and shooting work, in developing wells, in carrying out cable methods of well repair, in assembling, disassembling and testing turbodrills and downhole motors. Participation in the assembly, disassembly and installation of metal patches, production and pressure packers, various types fishing and cutting tool, downhole equipment, filters, wellhead piping, Christmas tree equipment, blowout prevention equipment and fire extinguishing equipment, in the replacement of wellhead packers, in the installation and dismantling, piping and pressure testing of high and low pressures. Production current repairs equipment and tools directly at the wells. Monitoring the serviceable condition of the rotor with the drive, the parameters of filling fluids, plugging mixtures and chemicals. Connecting and disconnecting electrical equipment and lighting equipment at the well with plug connectors.

Must know: well workover technology; the purpose and rules of operation of equipment, mechanisms and instrumentation used during the overhaul of wells; the procedure for starting flushing pumps, their design and repair technology; information about the used plugging mixtures, killing fluids, multicomponent solutions, blocking waterproofing compounds, chemical reagents, clay solutions and methods of their preparation; rules for working with acids and alkalis; well development methods; methods for studying wells with instruments (Nadym, Dikt, etc.); equipment wiring diagrams; types and sizes of elevators, lifting hooks, traveling blocks, crown blocks, swivels and ropes; operating principle of the control and measuring instruments used; installation of lifting structures and mechanisms; sequence of operations when lowering and lifting pipes and rods and when extending tools; the tools used and the rules for using them; arrangement of flight stairs, floors, under-crown platforms and fingers for installing candles; rules for controlling blowout prevention equipment; standard projects organization of workplaces and maps of advanced and safe work practices.

When working on wells of the first category of complexity - 4th category;

when working on wells of category II complexity - 5th category;

when working in wells deeper than 4000 m - 6th category.

For an assistant driller for major workover of wells of the 6th category, secondary vocational education is required.