Useful DIY garage gadgets. DIY Garage Accessories: Ideas and Tips for Making Homemade Garage Furniture

It’s rare that a garage is used exclusively for storing a car, but even one over time acquires a bunch of home-made products necessary for its maintenance. Often it is the garage that serves as a home workshop for its owner. What should you fill it with to make the life of the car owner easier and, of course, save on car repairs and maintenance.

We will talk about homemade products for the garage and home handyman that you can make with your own hands.

The very first thing, in my opinion, that needs to be created in the garage is a place to store all kinds of small items and tools. These can be racks or shelves that will fit well into the garage interior and help put things in order. They can be made from wooden planks or metal corners that you left behind during renovation or construction of your home.

And with the help of magnets you can easily tidy up small parts.

A garage is very useful for storing garden supplies, if space allows, because... not always on suburban area There is a special room for such things. The photo below shows how easy it is to do this using strips and hooks.

It is also convenient to store travel and sports equipment in the garage (after all, not everyone in their city apartment has extra space to store bicycles for the winter).

The following devices on the ceiling save a lot of space in the room:

And most importantly, tires have a special place in the garage. Real home craftsmen can easily make tire holders with their own hands.

And if there is welding machine, then such holders can be constructed from metal corners.

It saves space and keeps the garage clear of clutter. And you can safely create masterpieces in making homemade products for repairing and servicing your car.

Stands and mini-overpasses in the garage

A jack is a standard tool included with a car, but it is strictly prohibited to carry out even minor work under the bottom of the car when it is hung on a jack. And sometimes it is necessary to lift its entire front or back part.

In this case, you can’t do without goat stands.

Sometimes the stands are made in the form of mini-overpasses that the car runs over.

Except general requirements listed below, important element For such stands there is a travel limiter at the front of the structure.

It doesn’t matter what they are made of, but the requirements are the same:

stable wide support;
safety margin for the design weight of the vehicle;
minimal gaps between moving elements for height-adjustable stands.

The video shows the simplest coasters with a drive-in:

Very often, just such a homemade product is not at hand in the garage during repairs that do not require the involvement of service specialists.

After all, they are used to remove not only bearings from the shafts, but also gears, and they will also help press out and press in silent blocks and so on.

A factory-made bearing puller is quite expensive, but making this device yourself is not so difficult:

Even if you don’t have welding, and you need a puller urgently, you can clamp an elongated nut with stops between the strips of the puller body from the video. Or use a power plate design with drilled holes, as in the photo, where the nuts can simply work against the stop and without welding. But it’s also useful to have a small welder that can secure such elements in the garage.

Homemade welding from a microwave transformer for the garage

This is one of the most suitable transformers for conversion into a welding machine. The primary winding in it is standard, only the secondary is altered. Moreover, the wire can be used thinner than in the video offered to you, but preferably with a cross-section of 8 - 10 mm:

The number of turns simply increases. Transformers from low-power microwave ovens produce welds with a power of 0.5 kW, a current of about 250A and an output voltage of about 2V. They are capable of welding 2 sheets of steel with a thickness of 1-1.5 mm.

Such devices can be doubled, increasing the power ratings.

But it is not necessary to saw the housing - you can saw off the protruding turns of the secondary winding and take it out, and simply drag the new wire through the resulting windows.

Also, it is not at all necessary to place the electrodes opposite each other. You can place them side by side, with a gap of 2 - 3 mm. With this device you can weld the wing to the body and do much more.

You just need to modify the holder a little and make it removable.

And for small things, this version of mini-welding using a standard car battery is quite suitable:

Compressor from an old refrigerator in the garage

Despite its apparent weakness, it is a fully functional unit. With its help, you can pump up the tires and, with a little modification, paint the car. It is no weaker than most car compressors powered by a cigarette lighter, but unlike them, it can operate for a much longer time.

The main problem with the direct use of this compressor is the presence of a thermostat in its connection diagram as part of the refrigeration unit. It should be disabled:

But installing a fine filter on the outlet hose of a car that catches oil droplets is ineffective; it is better to use more powerful filters with sedimentation tanks for this purpose. The starting relay should be used as standard. The compressor is powered by 220V, which makes it connected to the mains, but in a garage it is a very useful device.

To inflate the wheels, you should put a gun with a pressure valve and a pressure gauge on the outlet hose, because this little thing can create pressure up to 16 atm.

And if you plan to use such a compressor to carry out small painting jobs, then you cannot do without a receiver.

Its role can be played by any sealed container capable of withstanding a pressure of 4 - 7 atm, into which 2 threaded or comb fittings can be inserted. Installation of a pressure gauge in such a system is mandatory.

You can also use a car wheel or even a camera as a receiver. A more stationary version of such a receiver is shown in the video:

But you don’t have to spoil the disk, but make the system simpler.

The pumping hose is connected to the system through a spool, and on the outlet branch there is a mechanism for shutting off the air in the paint sprayer.

Of course you can use and .

But in this case, a shut-off valve should be installed in front of it. But the wheel can also be inflated with a mechanical pump; with a small air flow, such pressure will be sufficient.

The simplest devices for recharging the battery

Having a full-fledged car charger is good, but sometimes it’s quite expensive, especially since cheaper devices can also perform its function. So, a laptop charger can handle a full charge of a car battery with a capacity of up to 75 ampere-hours.

Moreover, there is no need to make any alterations, but simply plug in a 12-volt 55-watt car lamp into the circuit and periodically monitor the battery charge level with a multimeter.

When the indicator reaches 13 - 13.5V, you should stop charging - the battery is fully charged. In addition, it is extremely important not to confuse the polarity. This use of the adapter does not harm it at all.

In general, without any modifications, chargers for 12-volt cordless power tools handle the recharging function quite well, and most of them also have LEDs indicating that the battery is fully charged.

An old computer power supply can also slightly recharge a dead battery to a level sufficient to start the car. It has an output voltage of 12V, and for fully charged it needs to be up to 14V, but minor modifications can provide this voltage.

Tire mounting and balancing - homemade products for the home craftsman

Creating devices for independent tire mounting and balancing in your garage is realistic, and will allow you to constantly save quite a lot of money. And you don’t need a lot of equipment for this:

universal machine for tire mounting;
balancing device.

Some craftsmen destroy functional parts tire changer, but in a garage it is better to combine them on the contrary.

You will need a paw with a lever for tearing the tire off the rim and a stationary stand with holes for mounting the rim and a central stop pin. The disk can be mounted different ways, but since you most often have 1-2 cars for personal use, it makes sense to make the mounts for specific wheels. The easiest way would be to drill holes for the bolts locally. The number of levers for removing and installing a tire on a disk can be large, or you can get by with just one – double-sided.

This is exactly what the home master did in the video:

Of course, it would be more convenient to attach such a machine to the base, but on the other hand: when assembled, it will not take up much space in the garage, but will perform its main function anyway.

And yet we don’t trim wheels as often as they require balancing. According to the rules, it should be done at least every 10 thousand kilometers, but this procedure at a service station is quite expensive and therefore few people maintain the established frequency. And its quality does not always meet our expectations, because complex computerized machines are even more expensive to set up and maintain, and the running gear of our cars suffers as a result.

There are 2 types of balancing:

static;
dynamic.

The jigs for both are not complicated, but you will need a good turner and a quality bearing for one of them. Often static balancing It’s quite enough if you mostly drive at speeds no higher than 120 km/h. You need to turn a hub to secure the wheel of your car, it is advisable to do this with one fastening of the part or subsequently carefully balance it by drilling blind holes in in the right place.

And the process of static balancing is clear from the video:

The listed accessories for the garage, which are not difficult to make with your own hands, are not the only ones of their kind; there are a lot of other homemade products that simplify the “garage” life of a home craftsman. If you share your options for such devices with us, we will be sincerely glad.

Dear readers, if you have any questions, please ask them using the form below. We will be glad to communicate with you;)

When it comes to garage furniture, this means various racks, bedside tables, shelving, chairs, workbenches, which allow you to neatly and in perfect order store working tools. In addition, they are used for minor repairs. Today you will learn how to make a chair for the garage with your own hands, and get acquainted with several more interesting ideas. If you manage to turn these ideas into reality, then all the car enthusiasts you know will envy you. In this article we will provide not only detailed master classes, but also useful tips, without which you cannot complete such work.

How to make a garage chair with your own hands?

Carpentry practice, of course, is better to start with something simple, gradually moving on to more complex structures. For example, you can make a garage chair with your own hands, only it will not be an ordinary stool, but something more like a stepladder, which you cannot do without in this room.

Prepare for work:

Wood.
Thick paper for the template.
Chipboard sheets.
Chipboard scraps.
Pencil.
Buttons.
Electric jigsaw.
Grinding machine.
Melamine, furniture edge.
Stiffening rib.
Racks.
Seat.
Clamps.
Piano loop.
Confirmations.
Plugs for confirmations.

Carry out all the work following this detailed diagram:

Use a special computer program to design or select a suitable step stool design on the Internet. Make templates for the side posts from thick paper.
Select chipboard scraps so that they fit all available templates. Carefully pin the templates to the chipboard using thumbtacks, then trace with a pencil.
Cut out the parts with a jigsaw and sand the ends using a machine. Cut out the remaining parts from chipboard according to the design. Cover the prepared elements with furniture or melamine edge.
First, assemble the smaller part of the chair that will not move. Screw the stiffeners to the step. Then step to one of the sidewalls so that it is clearly in the middle of the rack. Screw on the second post and install a stiffener for the seat. Mount the seat so that its edge coincides with the edges of the posts.
Now you need to assemble the second part of the stepladder. It will turn over, so the middle step is mounted upside down. Screw the stiffening rib for the upper step, then screw it itself.
At the final stage, screw the seat. Install both parts to form a stepladder, aligning the ends of the seat, securing with clamps. Screw on the piano hinge. Install the plugs.

This wonderful, and most importantly, functional chair is ready, it will fold out in two positions, which is very convenient for the garage.

How to make your own garage cabinet?

Making a garage cabinet with your own hands will be a little more difficult, but you will get a convenient, combined design that will save usable space and will truly decorate this room.

Important! This solution is most appropriate for large garages, the shelves of which are always filled with various tools and parts. Such a cabinet can be equipped with drawers and shelves for storing all kinds of objects and things.

We will again use a ready-made project, but you can change the dimensions of the parts, depending on specific conditions and your own requests. First, perform the calculation, trying to do everything as clearly as possible, so that in the future you do not have to redo all the work. Number each part on the diagram and indicate all dimensions.

Important! Label the parts as you make them to make it easier to assemble the entire structure later.

Prepare the following elements from 38 mm thick wood slabs:

Base cover.
The side wall of the cabinet.
Three front walls of the base.
Five base partitions.
Seven risers.
Eleven steps.
Seven shelves.
Two front panels for drawers.
Five shields of a stepped wall.

From the same 19 mm thick plate, make the following parts:

Four front and back walls of the box.
Four side walls of the box.
Two bottoms for drawers.

From a beam with a cross section of 25 by 25 mm, do the following:

Shelf support.
Railing.

For cutting and assembly, prepare:

Electric circular saw.
Screws.
Furniture casters.
Dowels.

Now that you already know all the dimensions, and you know exactly how many parts are needed, you can go to the store for materials and get to work.

Make a cabinet according to these instructions:

Mark all workpieces. Make a cut on them. Cut out the blanks, check that they correspond to the required dimensions and are square. Sand the cut edges.
First of all, assemble the base in the form of a box-shaped structure, the length of which can vary depending on your desire and certain conditions.
Screw the partition base to the lid, the width of the cells for the drawers should be 60 cm.
Separately assemble from the shields, then glue the stepped wall. While the glue dries, leave the walls secured with straps. Then place the structure close to the wall so that it serves as a base.

Important! It is better to glue onto a smooth fugue of five pieces.

Drill holes for screws according to the diagram.
Mark the locations of the shelf holders on the wall. Attach them to the wall with screws and dowels. Install the same shelf holders on the back side of the stepped wall.
Assemble from steps and risers flight of stairs. At the same time, attach each step to the riser with several screws.
So, you have assembled the base, the stepped wall, and the flight of stairs separately; all that remains is to open up all the parts with varnish. But first, sand all the parts and components, then cover them with two layers of acrylic varnish.
Sequentially fasten the parts and assemblies with screws. Install the steps. Place a stepped wall on the base, secure it with the upper and lower steps. Attach the side wall, top platform and step wall to the base cover.
Attach the shelves to the side wall, then from the inside to the stepped wall. Install the shelves on shelf support bars. Replace the flight of stairs and attach them to the tread and side walls.
From below, additionally fasten the shelves with the flight steps using metal strips with screws. Sink them into the grooves to make them invisible. Install the remaining steps, the front walls of the base, and the bottom step.
Install the railings and drawers, and each of them must consist of identical walls connected to each other with screws.
Screw the bottom to the box, then furniture casters to it so that the boxes can move.
Screw the front panel with the handle from the inside of the drawer to the front wall. Insert ready-made boxes into the wall.

How to build a homemade workbench for the garage?

A wide variety of DIY garage furniture is made, because here car enthusiasts not only store various tools, but also carry out minor repairs. A work table or workbench is an essential item for the garage.

To assemble the workbench, purchase all the materials according to the list:

For the cover of the product, boards with a width of at least 40 mm.
Beam for making legs with a section of 70 by 100 mm.
Beam for crossbars 50 by 100 mm.
Nails.
Self-tapping screws.

Build as follows:

Make a frame with four legs.
Attach a cover made of carefully planed boards to the structure on top. Its edges should extend slightly beyond the frame.
Install longitudinal horizontal jumpers at a height of 50 cm from the floor to make the workbench more stable.
Place a shelf on them to store materials and tools.
On the tabletop, install a hinged stop, a special recess with a wedge, and drill holes with pegs so that the material is securely held during cross-cutting.
Along back wall attach a side so that the parts do not roll onto the floor during work.
Additionally, attach a bench vice for clamping while processing parts in a vertical and horizontal position.

We have given examples of the most useful items garage furniture that you can make yourself. At the same time, you do not need to spend a lot of money on purchasing materials and tools, because many suitable parts are already at hand in the garage.

Most men perceive the garage not only as a place where they park their car, but also as a corner where they can go about their business and get away from everyday problems. When arranging a garage, you need to place special emphasis on optimizing the space. It is important to ensure that everything is at hand necessary tools, and nothing interfered with movement around the garage. But garage furniture should still be chosen wisely; it should be comfortable, functional and durable. The garage owner should strive to create a cozy space as much as possible.

It all depends on the size of the garage - the more free space, the more useful devices you can store. Most often, everything is calculated down to the millimeter, so there is no special room for imagination. There must be an overpass or inspection hole, which will be used to inspect the vehicle. Lighting should be not only general, but also local - fluorescent lamps are suitable as the main source; for local lighting, halogen lamps should be used.

One of the must-have devices for a car owner is a charger. IN winter time without charger not enough. To inflate tires you need to get a compressor. For swapping in garage conditions Portable compressors that can operate from a cigarette lighter are suitable. There is also a set of tools and accessories without which it is difficult to imagine car care:

Complete set of wrenches. The set should include both standard (carob or end) and special ones, for example, for spark plugs;
You need to bring a wrench, a drill, and a hammer. A car hose, a canister, a hydrometer, and a caliper will inevitably come in handy;
A washbasin is required. Also in the garage there should be a set of taps and dies, fire extinguishing equipment;
A broom will help keep the garage clean; in winter you will have to use a shovel.

No need to assemble it yourself spanners, since it is already on sale ready-made kits, where everything is provided.

Varieties

Globally, all furniture used in garages is divided into two categories - racks with shelves and workbenches with tables. The choice of configuration of shelves and tables depends on what work will be carried out in the garage. Before you start arranging the interior of your garage, you need to answer a few questions for yourself:

What work will be carried out in the garage? What types of car breakdowns can you fix yourself?;
Which tool do you plan to use more often? What types of workbenches are needed?;
What is the burial level? groundwater? This is especially important if the garage is new and does not have an inspection hole.

Workbench and work area

Not always garage furniture also includes a workbench - it may be required to repair a car, and modern realities are such that many car owners send their car to a car service center at the first problem. This approach does not exclude the possibility of having a workbench in the garage. But you need to decide what type of workbench you need to install. Homemade workbenches have a classification:

For metalworking, metalworking benches are used;
Carpentry workbenches are used to work with wood;
There are such universal machines for all repair work.

The difference between workbenches lies in the types of materials. Fully used for metalworking metal workbenches: they are able to withstand any load and do not rot under the influence of machine oil. If you understand that metal processing will not be carried out, it is worth installing a wooden workbench for carpentry work in the garage. Universal machines combine metal and wood covering. Regardless of what type of workbench is chosen, the desktop must have load-bearing structure, a thick wooden or metal frame, a bedside table with shelves and several shelves under the tabletop.

For normal work on the workbench, you need to equip high-quality lighting. A small stationary lamp will be enough.

Self-production garage workbench resembles the technology of making shelving, with differences in the number of shelves and their height. It is important to take into account a number of points:

The height of the workbench should not exceed 1.1 meters, it is selected according to the person’s height. You need to try it individually, whatever suits you. The table configuration must withstand a minimum weight of 150 kg;
To meet the rigidity requirement, you need to use boards with a thickness of at least 30 mm to make the table. If according to objective reasons it is impossible to use such boards; the table will need to be additionally reinforced with stiffening ribs;
No sharp edges are allowed on the table.

An alternative to a workbench with a workbench can be an old desk if it is not possible to make homemade tool furniture.

For storing things and tools

In practice, the installation of furniture for workshops and garages begins with the installation of racks and shelves. Since in our realities garages are also used for storing household rubbish, you need to provide enough free space for everything to fit. Preference should be given to shelving. They allow you to make the most of the free space available in the garage. The space above the workbench can also be functional - you need to install shelves there.

Like a workbench, shelving can be assembled yourself. Both wood and metal can be used as the main material profile pipe. The sequence of work does not depend on the choice of material:

Two standard stairs are being manufactured - they will be connected to each other. It is important to calculate the distance between the shelves correctly, and it is also important to calculate their number;
Then the stairs are connected in such a way as to form a bookcase. To properly join the shelves, you must first align the stairs at the top and bottom;
Plywood or boards can be used as flooring for the shelves of the rack.

Garage shelving can be floor or wall mounted. U floor shelving there is a base, they can support a lot of weight. Wall racks are more preferable for storing small tools and accessories. They can be made not deep. A wall rack with horizontal slats should be used when the structure is planned to be installed on the entire wall. Vertical slats fit multiple sections. You can also install a corner shelving unit, but it is most convenient to make sections on the entire wall with horizontal shelves and storage compartments. This will allow you to place all the tools, containers, and boxes on the wall. The garage should not be overly filled with furniture, since there should be at least one meter left on both sides of the car. Along with shelving, hooks and clothes hangers can be installed in the garage workshop.

Functionality and requirements

Most often, garage furniture is shelving. Stationary shelves cannot be changed in height, but they can withstand heavy loads. At prefabricated racks vertical racks made of perforated metal, which allows you to change their height. Mobile shelves can be moved using wheels. Rotating racks are modernized rack for disks - you can store small items there, for example, nails or screws. The choice of this or that furniture depends on the number of items, as well as their configuration and weight.

The furniture requirements are as follows:

It should be easy to clean from dirt;
Furniture must be resistant to temperature changes, mechanical damage and ultraviolet radiation. Temperature changes in the garage are common as the garage door will be opened and closed regularly;
Furniture must be resistant to toxic environments.

Each material has its own weak spots. Metal is the most durable, but it is susceptible to corrosion and weighs a lot. Wood is susceptible to mold. Plastic is not able to withstand heavy loads.

Arrangement rules

How comfortable a person will be in the room depends on the proper arrangement of furniture in the garage. The main challenge is to find extra centimeters to store tools. You need to start the placement process with zoning - it’s more convenient to outline all the zones on paper. This process is just as important as for the bedroom or kitchen. The garage must have a walk-through area. She must always be free. Here you can place a clothes hanger. Accordingly, there should be nothing there except clothes. It is necessary to designate a so-called easy access zone where things that are used constantly will be placed. You can put a separate rack for storing household items and preservation.

All long and thin items, including brooms, shovels and other oversized equipment, should be kept nearby so they are easy to find. As for large items that are rarely used, they should be placed where there is no passage or passage. You can choose a mezzanine or a place under the ceiling. This includes seasonal items, that is, those that are used several times a year. Anything that is used frequently should be in the area quick access, for example, along one of the long walls of the garage. A car pump, a set of keys, a spare tire and other equipment should be within easy reach.

It is better if the most frequently used tools are located near the workbench, which is the main workplace. It is important to maintain order here, to put everything in its place immediately upon completion of work, otherwise work zone gets cluttered quickly. Screws and bolts should be kept in transparent containers. Closed boxes it makes sense to sign. Small and medium-sized tools can be conveniently stored on perforated panels. Most often they are placed in front of workbenches. Magnetic strips are also convenient to use for the most frequently used tools. A properly designed garage can accommodate great amount various objects, while being within reach and still leaving free space.

Photo

Furniture for the garage is functional racks, workbenches, shelving different sizes, bedside tables and other items intended for storing working tools and carrying out minor repairs on them. Any car owner is proud of the furniture in his garage, especially if it is made with his own hands.

The article suggests getting acquainted with the manufacturing technology of some products for such a room.

Features of the garage arrangement

A garage is a room where a car is located, spare tires for it, various parts, and tools are located. Inventory that is not used or prepared for equipment repair is also stored here.

Such multifunctionality of the room also dictates its special arrangement, which requires compliance with the rules:

Ergonomics.
Security.
Of a certain order.
Comfort.

Tip: Ideally, if the garage space is divided into functional areas with a basement, inspection hole and workshop. It is very important that the tool is located in the right place, always at hand.

With proper calculation and zoning, things stored in the garage and the car do not interfere with a person’s movement, and securely fastened machines do not damage the car body. Before you start equipping the room, you should purchase furniture in the garage, you need to draw up a plan for its arrangement.

To do this you need:

Make a diagram, draw a design plan or preliminary design in three sizes:

length;
width;
height.

With in a convenient way opening, which takes into account the best option to save space and prevent damage to the machine.

Plan a parking location for the vehicle with the greatest convenience, access to its components and systems that require frequent inspection and periodic repairs.
Calculate the size of the passages around the car, which will ensure free movement around it in the garage.
Determine the possibility of locating racks, workbenches, shelves, car washes (see), cabinets for storing tools and equipment. In garages with small area places for attachments are marked, the height of structures and the height of their placement are calculated to ensure safety for the owner and his car.
Choose materials for thermal insulation and finishing for furnishing the room, come up with a design.
Calculate what the price of upcoming expenses for the purchase of finishing materials will be.

Making furniture yourself

How to make a homemade workbench for metalwork

Tip: Before you start making furniture for your garage with your own hands, you should choose a simple and affordable design, and gradually move on to a more complex one.

An essential item in the garage is a workbench or work table. Such furniture for the workshop and garage can be small in size, up to 1.5 meters long and 0.6 meters wide.

The height is selected depending on the height of its owner. The best option products when the top cover is located at the level of the middle of the palms with the hands of a person standing straight down. With a smaller size, the workbench will not be entirely convenient.

To make a workbench you should purchase:

Boards over 40 millimeters thick for the cover of the product.
Wooden beam 70 x 100 millimeters for making legs.
Beam 50 x 100 millimeters for crossbars.
Self-tapping screws.
Nails.

The procedure for assembling the workbench is as follows:

A frame with four legs is made.
A lid made of smoothly planed boards is attached to the top of the structure. Its edges should protrude slightly beyond the frame.
Horizontal longitudinal jumpers are installed at a height of approximately 0.5 meters from the floor to stabilize the workbench.
A shelf is placed on them to store tools and materials.

Tip: On the workbench tabletop you should install a stop, a recess with a wedge and drill holes with pegs. Attach a small edge along the back wall of the workbench, which will prevent the parts from rolling off the table.

On such a workbench (see) a bench vise is usually additionally attached.

For the accuracy of operations and human safety, the workbench should be located in the garage next to the light source.

Tip: To ensure fire safety After finishing work, turn off the lights and electric heating devices. Promptly remove waste materials from the workplace and from the garage.

A hinge stop is installed in the rear corner of the board to hold the material during cross-cutting.
The vice is adapted to clamp the workpiece when processing it in a horizontal or vertical position.

Tool cabinet

Such DIY garage furniture can serve to perform the most various works and storage of tools. Indoors it takes up very little space, and its appearance if done well, it will decorate the room.

To make it you need:

Make a plan diagram of the bedside table. In this case, you can choose finished project, or you can design it yourself, taking into account your preferences for the arrangement of your workplace.
It is useful for a novice carpenter to first make a cabinet to store tools for work. This will give you the opportunity to gain the necessary experience in carpentry work, and then build a mini-workshop for full-fledged work, which will fit in a small wooden box.

The tool cabinet shown in the photo is a floor-standing one. small sizes, closet. It has storage slots inside different instruments, and outside there is a workbench board.

How does a wooden tool rack work?

Such garage furniture has a more labor-intensive and complex manufacturing process compared to a bedside table, but in the end you can get a combined design, which saves space and can decorate the room.

This solution is good to use in large garage when you need to place parts and various tools on the shelves. You can store many things and objects here.

If necessary, all dimensions of the structure can be changed depending on the requests of its owner and specific conditions. As the main dimensions change, the project also changes, new parameters are set for its details.

Tip: Before making a rack in the garage, it is calculated with maximum accuracy so that there is no need to redo the work, which can lead to the waste of basic material, time and effort.

On the diagram, all parts are numbered and its dimensions are written on each. In this case, the parts must be numbered in the order in which they were manufactured, which will greatly facilitate the subsequent assembly of the structure and help quickly find the necessary parts.

To lay tools in the garage, you can use ordinary boards, and chipboards are suitable for making boxes. Assembly requires screws, dowels, and varnish.

After determining the size and quantity of parts, it is purchased required material and you can start making the structure.

The procedure for manufacturing the structure is as follows:

The workpieces are cut using a hand-held electric saw with a guide.
When making a garage rack, it is necessary to accurately maintain all angles and dimensions. To do this, marks and marks should be applied to the workpieces, and the material is cut according to them.
After cutting out the workpieces, their right angles are checked to ensure compliance with the required dimensions.
The edges of the cuts are polished.
Going to wooden rack according to previously developed drawings.

The video shows how metal furniture for the garage is made. Properly selected equipment in the garage can provide its owner with comfort and convenience when performing all work.