Spray paint your refrigerator at home. How and with what you can paint a refrigerator with your own hands at home. Paint protection film or a stack of newspapers

How to paint a refrigerator? The answer to this question is sought not only by owners of old units that have lost their appearance, but also by those who want to transform the appearance of a new device or fit it into the interior after renovation of the premises.

Not only the choice of paint, but also the choice of method will depend on the purpose for which the painting will be done. And there are a huge number of them, as well as techniques or methods. At the same time, they are all simple to implement, so anyone with patience and minimal knowledge of painting can handle the implementation.

The easiest way to restore the coating is on a white refrigerator covered with matte paint. In the case where the unit was painted “stainless steel”, you will have to tinker a little longer. If the master’s desire to paint the refrigerator a different color is great and he is not afraid of difficulties, then he can begin this task. But first you should study the article.

Paints and tools

The choice of paint for transforming a refrigerator depends on the tasks at hand. The most popular and suitable for repairing the coating of a unit are:

enamel, acrylic or epoxy paints for metal in containers;
polyurethane dyes;
automotive nitro enamel;
enamel paints and varnishes in cans.

To restore the integrity of the outer layer when painting a refrigerator, you need to use compositions containing aluminum or zinc granules. Solvents for selected types of paints should be selected in accordance with the manufacturers' recommendations.

Before you start painting the refrigerator, you should prepare necessary tools, fixtures, as well as appropriate paint. Information on which of them will be required in a particular case is given in the table below.

Type and reason for painting	Tools and accessories	Paints and other materials
Repairing old cracked flooring	Rubber gloves, mask, newspapers, oilcloth, brushes, roller, spray gun or paint containers, sandpaper. You may also need a screwdriver.	Primer, paint or varnish in cans, solvent, remover old paint, masking tape.
Modified coating, original decor	Rubber gloves, newspapers, oilcloth, brushes, airbrush or paint containers, screwdriver.	Acrylic, epoxy or enamel paint. Brushes of various sizes, palette for mixing paints.

In addition to all this, in any case you will need to stock up on a large amount of rags.

If you decide to paint a refrigerator at home, you should make sure that there is an influx of water in the place where the work is being carried out. fresh air. You also need to provide good lighting.

Where restoration work will be carried out, all food should be removed, and children and animals should be removed from there. You also need to study as completely as possible the information about the compatibility of putties, paints and solvents for them.

Step-by-step work instructions

When painting a refrigerator, it is important to be patient and enlist the support of family and friends. When transforming an old unit into a new one, you need to concentrate as much as possible on the process and make sure that outsiders are not distracted.

It is important to know and follow the order and frequency of all work. And that is why you should make up for yourself step by step instructions and, without relying on excellent memory, write down the procedure in a notebook.

From a can

In order for spray painting to take as little time as possible, and also give best results, the following procedure should be followed.

We de-energize the unit, remove all food from it, remove the internal drawers and shelves, and completely defrost it.
We move the refrigerator to the center of the room or move it to the utility room.
Using a brush, thoroughly wash the entire refrigerator outside and inside. Wipe dry. For cleaning, you need to use gentle (liquid or aerosol) detergents that dissolve grease.
We dismantle handles and other small external parts that cannot be painted: plastic thresholds, moldings, trims, etc. If the unit has permanent parts, such as labels or visors, they should be sealed with construction tape.
Be sure to lay oilcloth, newspapers, old wallpaper or rags on the floor of the room.
Places where rust has appeared are thoroughly cleaned to bare metal. We also erase other minor damage to the paint down to the metal: chips of enamel at the corners and cracks in the paint. In cases where it is impossible to properly sand the unit and remove the peeling paint, you can use a product to remove the old enamel coating.
We carefully clean the transition areas on the enamel with very fine sandpaper. This is done so that transitions are not visible, and the new paint lays down as evenly as possible - without protrusions or smudges.
Remove the rubber seals or cover them with masking tape. You can also dismantle the doors entirely.
Apply a primer suitable for the chosen paint. The base layer can be applied using either aerosol cans, and with a brush. In the latter case, use packaged in regular cans metal paint.
Let the soil dry enough so that a dry palm does not stick to it. If necessary (when you need to level the surface), apply a second layer.
Apply paint of the selected color from a distance of thirty centimeters. The container should be held strictly vertically, and before doing this, shake thoroughly.
Watch your hand movements and do not hold the aerosol in one place. It is important to ensure that the paint is applied in a thin layer.
The paint should be applied in at least two layers. At the same time, be sure to ensure that each previous one dries well. Otherwise, smudges or cracks may form in places large quantity paints.

After the restoration, when the paint has completely dried, you can apply a design to the refrigerator or cover the unit with car varnish. In this case, the outer coating will become more durable and shiny.

If you want to get a refrigerator of some “acid” color, you can use paint from graffiti cans. To cover one two-chamber refrigerator For an average volume, one large bottle of paint will be enough.

The inconvenience of using the above method is the impossibility of applying a high-quality coating to small parts. And also home handyman You will need to acquire skills in working with a spray can before painting the unit itself.

Painting with paints

After covering the refrigerator new paint or in the case when the refrigerator does not need restoration, you can apply a pattern to its surface. For such purposes, paint must be selected so that it can adhere well and reliably adhere to the previous coating. Best choice Acrylic paints are used for hand painting. They are abrasion resistant, compatible with many enamels, are not afraid of water and come in many shades.

For those who do not know how to draw, but have a great desire to paint the refrigerator themselves, there are a huge number of ways, including:

Ready-made or homemade cardboard stencils. They are secured to the surface with tape, and then the space inside the slots is filled with paint. You can use these blanks to decorate your refrigerator. bright colors and apply multi-color designs. If some details on the stencils are made with constrictions, then the voids in their place should be drawn manually after the base layer of paint has completely dried.
Stickers. Such fragments are glued to degreased metal, and after that the surface around them is covered with spray paint or painted with a roller. You can remove the sticker only after the coating is completely dry. All irregularities along the contour will need to be drawn manually. To do this, you can either use the main color or make a edging in “gold” or “silver”.

People who know how to draw beautifully or copy pictures from a sample even decorate refrigerators with Gzhel or Khokhloma painting. There are also samples painted in any other painting styles. Appliances, decorated with hand painting, look amazingly beautiful and add a special touch to the interior.

Painting with enamels

You can also paint the refrigerator manually with a roller or brush. The process is not much different from treating surfaces made from cylinders, only this coating will take a little longer to dry. With enamel paints you can easily apply a single-color roll, as well as decorate the refrigerator with simple pictures.

More often enamel coating used for painting over scuffs and chips. You just need to know that the paint that is applied to the refrigerator must be special - for processing metal surfaces, and not the kind that paint wood.

With a special paint that is water-repellent and resistant to temperature changes, you can paint chipped enamel under the rubber bands, on the footrests and in other places inside the refrigerator compartment. Restoration paints internal covering They only come in white. Colors that can be used to change the shade will need to be purchased separately. This kind of coating is applied only with brushes or rollers. Drying paint for interior work about a day. Only after this time can a new layer be applied.

Slate coating

Recently at the height of fashion in kitchen interiors refrigerators covered with slate paint. It is available in several colors. There is also paint with magnetic chips. You can write on this coating with chalk, as well as make drawings. The method of applying paint is no different from coating with enamel paints using a brush.

You can buy material for the restoration of an old, but still usable refrigeration unit in any construction department of a hypermarket, or you can also make it yourself from:

two hundred milliliters of white acrylic paint;
two tablespoons of white putty or grout for the joints between the tiles;
a few drops of water-soluble brown or black color.

Before applying slate paint, sand the surface of the refrigerator with coarse sandpaper. This action will help the layers adhere better. The coating can be applied with a brush or roller, but small parts should be painted exclusively with a brush.

The procedure is similar to spray painting. If you need to apply several layers of paint, then each previous one must dry. If the refrigerator needs to secure the metal layer, then a primer for acrylic should be applied under the decorative layer. Excellent choice will become a colorless substance containing magnetic shavings. Thanks to this life hack, all kinds of magnets and cute little things will be easily attached to the unit.

To make sure that painting a refrigerator with slate paint is easy, we suggest watching the video attached to this section of the article. It contains clear example carrying out the work, and also shows all the tools and equipment that will be needed in the painting process.

Non-standard ways to transform the outside of a refrigerator

TO non-standard ways changes appearance refrigerators include the following:

Pasting self-adhesive film. On sale you can find many ready-made graphic fragments and story stickers made from vinyl. You can also purchase film with an adhesive layer linear meters in any construction department of a hypermarket.
Airbrush. This method transforming the appearance of the refrigerator helps to apply patterns to the unit using the dot spraying method. This method has recently become increasingly popular; it is used to decorate cars.
Decoupage. One of the most simple ways decorate the refrigerator with your own hands at home. The substances used to fix the selected pictures do not have a strong odor, dry quickly and are available in any hand-made store. IN finished form Decoupage looks like a hand-painted design with acrylic paints with fine details and multi-layered “professional” strokes.

Of course, the methods described above do not apply to painting, but these options are also often used instead of and after the latter.

Painting the refrigerator compartment

Painting the refrigerator compartment differs from the methods described above. It is important to understand that the inside of the refrigerator has special conditions operation. The chamber has high humidity and poor ventilation. That is why you should know that painting the inside of the refrigerator in order to change interior design not worth it. But in the case when rust or yellow stains appear on the surface, measures should be taken immediately.

But for this you need to use exclusively acrylic paints or coloring compositions for use in household appliances. The procedure for painting inner chamber next:

Remove rust by applying special remedy for removal or using sandpaper.
Apply a layer to help the acrylic paint adhere to the enamel coating.
Degrease with gasoline or any other substance of similar effect.
Prime with acrylic putty.
Dry and sand.
Apply the first layer with a brush and leave it until completely hardened.
Apply a final coat of paint and then leave refrigerator open for at least a day.

Before use, thoroughly wash the freezer or food compartment with water and vinegar, then turn on the refrigerator and fill it with pots of water. There is no need to cover the latter. In this mode, the unit must operate for at least three days. During this time, you need to change the water regularly. You can also help combat the smell of a “new” unit using:

dry tea leaves;
activated carbon;
ground natural coffee.

In addition, adsorbent for refrigerators will help in the fight against paint odor. True, you will have to spend money on it, because you will have to change the product every day for a week.

We hope that the article was useful, and after reading it, the refrigerator you painted yourself will be pleasing to the eye. Listen to the advice, choose a photo as a basis and start acting!

If your refrigerator copes with its functions perfectly, but already looks shabby and does not fit into the interior of the kitchen at all, you can update it. Often it is the appearance of the device, or rather its damage, that is the main reason for replacement. Old refrigerators are not thrown away, but sold or used in the countryside. Accordingly, by updating the color, you don’t have to spend money on buying expensive equipment if you’re satisfied with the rest.

Suitable for this purpose are either self-adhesive film, or paint. The first option is difficult to implement, because it is difficult to paste over the surface of the refrigerator evenly and without wrinkles. In addition, the film is easy to scratch and quickly fades when exposed to sun rays shining through the window. It’s much easier to evenly repaint the refrigerator, choosing absolutely any color, and perhaps even create a pattern!

And now, first things first, let’s figure out how to paint a refrigerator at home, what paint is suitable for this, and what sequence of actions should be followed in order to do it yourself, without involving specialists.

Painting a refrigerator at home involves the use of special paint and tools. The surface of the equipment cannot be classified as simple or ordinary; accordingly, not every coloring substance can be used. High demands are placed on the paint layer:

It must protect the facade from mechanical damage that occurs during operation.
It should give an updated appearance and add variety to the interior.

Also, the paint should not “peel off” after a few months, that is, it must have high performance characteristics.

When choosing materials, take into account the specific use of the device. If the refrigerator is always located in a dry and heated room, that is, in the kitchen, there is no risk of rust. Another question is if the refrigerator is placed in a damp room, for example, in workshops or warehouses and other industrial areas with high humidity. In this case, it will be necessary to treat the surface with an anti-corrosion solution. For home use such a solution will be inappropriate, as well as a fireproof base or paint, because in principle a refrigerator cannot be connected near a fire.

In this case, paint that can be mixed with other colors, adheres to a vertical surface, is elastic in structure and is resistant to detergents is preferred. Thus, to paint a refrigerator, you need metal paint for interior work that is resistant to water.

There are several types of such paints, and the following types are ideal:

nitro enamel for painting cars - this type is easy to apply, is highly durable, and has a beautiful shiny tint. Paint sold in aerosol cans, so application will not cause difficulties. Among the shortcomings we can highlight high cost, toxicity (should be used when open windows and in a respirator), inability to control splashes. To organize the process, you will have to cover the walls, floors and furniture to prevent subsequent cleaning;
acrylic paint for metal - applied with a roller or brush, available in many colors. The composition is characterized by safety, since it contains no toxic substances;
polyurethane paint - of all types, it is more resistant to wear. Moreover, it can be used both for the external surface of the refrigerator and for the internal one. She's not afraid low temperatures, is easy to apply, so in cases where it is necessary to paint over scratches, use it.

What tool will you need?

You cannot start painting right away; the surface must always be prepared in advance. The refrigerator is located in the kitchen, where food is constantly being prepared, so every housewife has traces of grease on its surface, covered with dust. These may be tiny specks, but they are there. That is why, before starting work, it is necessary to wash the surface well so that the paint lays evenly and easily, eliminating cracks and chips in the future.

To organize work, including preliminary preparation and further painting, you will need the following tools and materials:

detergent to remove dirt;
abrasive sponge;
rags (dry and wet);
fine-grained sandpaper;
acetone or kerosene for degreasing;
primer (for better bonding of the paint layer and the surface of the equipment);
masking tape, film, tape;
newspapers to cover the floors;
respirator;
gloves;
dye;
brush and roller.

Having collected the materials, you can begin to work.

Preparation process

As already mentioned, painting a different color should begin with preparing the surface of the refrigerator. Therefore, follow the proposed action plan:

for safety reasons, disconnect the equipment from the power supply, also remove the internal shelves and partitions, especially if you will also be painting inside;
Using detergents and an abrasive sponge, thoroughly clean the surface and rinse off the applied solution. Just cleaning the refrigerator is not enough; you also need to thoroughly rinse off the chemical compounds;
Sand the surface with sandpaper, partially removing the old coating. Rub most thoroughly in places where there are already cracks and chips - here old layer the paint is gradually coming off, so it is necessary to remove it so that in the future it does not cause damage to the new coating;
Wipe the refrigerator first with rags soaked in water, then with dry ones. This will remove particles of old paint, which should also not remain on the surface;
treat the refrigerator with a primer;
Seal handles and other fittings with tape or wrap with film. You can use masking tape to cover the elastic on the door and other parts that should not be painted. Also, if you are going to stick with a geometric pattern, then masking tape is ideal for this;
cover the floors with newspapers and, if necessary, the walls;
test the paint on small area refrigerator. Evaluate whether the color is suitable, how the paint applies, etc.

Painting process

Having completed preparatory work, the most important thing remains, paint old refrigerator. If you choose spray paint for this purpose, you must follow the instructions for it. General recommendations on using this type of paint:

When applying, keep the can at a distance of 30 cm from the surface to be painted;
movements should be uniform, from left to right, without staying long at one point, otherwise this place will be noticeable later;
paint in 2-3 layers, but each of them must dry, and only then the next one is applied.

If your choice fell on paint in a can, then you will need a brush or roller. Sharp color transitions either below or above will lead to an unattractive result. Move systematically from left to right. Painting is done in 2-3 layers, each of which must also dry.

As you can see, there is nothing difficult about updating the appearance of a working refrigerator with your own hands; even a person who does not have the proper experience can cope with this task. The main thing is to follow the recommendations for choosing materials and the sequence of actions, and then the result will delight you for many years!

Household appliances occupies important place in the life of every family. A refrigerator is a device in which prepared food or purchased fermented milk or meat products are stored. The appearance of the refrigerator changes over time, although it remains operational and freezes food properly. The paint on the refrigerator may peel off due to chips after moving, then the question arises: is it possible to paint the surface with your own hands, and how to do it.

The refrigerator operates from the mains. The serviceability of the unit depends on the integrity of the manufacturer and the ease of execution of the built-in programs. Models with little functionality remain functional even when the paint on the outside begins to fall off in large pieces. Many owners get creative with ideas for expanding space and even paint new refrigerators to create an unusual general interior. The process of restoring or changing a refrigerator has several features, this is due to the structure of the surface.

How to choose paint

The choice of helmet depends on what goals you plan to achieve:

changing the overall interior by painting the refrigerator in bright colors using stencils, drawings, prints;
painting over visible defects such as rust, chips, cracks.

Paint can be applied using a brush, rollers, or spray bottles.

Requirements

The choice of paint begins with an analysis of the required qualities of the composition. The paint should:

stay on the surface vertical type application;
be resistant to temperature;
be resistant to chemical elements, which contain popular kitchen cleaning products.

Suitable options

Among suitable formulations There are several types of paints. For many, the defining quality is the ability to be tinted. Experts advise trying the resulting shade on part of the surface and waiting for it to dry completely. Many paints, after drying, acquire unusual options chosen color, which becomes an unpleasant surprise.

Zinc

The zinc compound is known as zinc white. This paint is used to cover old refrigerators and can cover cracks and chips. Whitewash has advantages and disadvantages.

Alkyd

Compositions based on alcohol-acid compounds. They form a durable film that is not prone to rapid cracking. Among the advantages of alkyd bases are:

affordable;
dry quickly;
resistant to most detergents;
resistant to moisture on the surface.

Organosilicon

A suspension created on the basis of polymers. The main advantage of silicon organic paint is heat resistance. Painting work can be carried out at any air temperature; the composition dries in 2 hours. At the same time, the paint exhibits high wear resistance.

Nitrocellulose

Enamel paints based on cellulose nitrate. They are also called nitro paints. Unlike other compositions, nitro paints are applied in 5-6 layers. When applying the base, the surface is treated with primers to improve the quality of application.

Epoxy

Paints are made on the basis epoxy resins. The compositions are suitable for aerosol application. Epoxy paints are often used to coat metal surfaces.

Acrylic

Acrylic compositions based on polymers obtained by the breakdown of acrylic acid are popular. Advantages of acrylic paints:

safe, environmentally friendly;
dry quickly;
strong, durable;
varied in shades, amenable to coloring.

Acrylic can be applied to any surface using any tools. The only condition for working with acrylic compounds is that the air temperature should not be lower than +10 degrees.

Advice! Acrylic paints used for drawing or painting using stencils.

In this way, you can disguise the problem area of the refrigerator without resorting to complete painting.

Oil

The base for oil paint is drying oil.

These compounds cover defects well different types, but have significant disadvantages:

toxic;
have a pungent odor;
takes a long time to dry;
with prolonged use they tend to peel

Warning! Oil paints are prone to smudges and are difficult to cover vertical surfaces with.

Polyurethane

Compositions based on polyols. They have a high covering ability and can be applied differently. Suitable for painting refrigerators due to their resistance to high temperatures.

Preparing for coloring at home

After selection suitable paint, shade and method of application, select tools. What is important is preparation for the process of applying the composition, the ability to paint the refrigerator from all sides.

What you will need

In addition to paint and painting tools, you will need auxiliary elements with which to treat the surface of the refrigerator. The list depends on the condition of the surface of the refrigerator.

Remover for stubborn and greasy stains

On one side of the refrigerator - the one that stands near the stove - there are often stains from splashed fat, traces of frozen food particles after careless cooking. Even for the most tidy housewives, drops can stick to the surface and solidify where they are not immediately noticeable.

Use improvised means to remove stains. These can be liquid formulations with bleaching elements or powders, the effect of which begins after mixing with water.

Abrasive sponge

To remove small greasy stains, use special sponges with a rough surface. They can get rid of small spots and streaks, and also help eliminate particles of the top layer that form after the old layer of paint peels off.

Wet and dry cloth

After treatment with detergents against greasy stains, the surface is washed using soap solutions. Then wipe dry with a dry cloth.

Fine sandpaper

Refrigerators that have already been painted are additionally treated with fine sandpaper. For some specimens, treating the flaky areas is sufficient, but some models require complete treatment.

Information! When completely sanding the surface, it is recommended to maintain the same level of pressure.

Degreaser

After treatment, the surface is coated with a degreaser. This is necessary when applying oil paints, some types of alkyd.

Masking tape or cling film

By sticking masking tape or applying cling film, cover handles, decorative elements, and inscriptions that do not want to be painted over. The tape and film are removed after applying the paint using gentle movements.

Paper for lining

The refrigerator for painting is moved away from the walls and unplugged. Floors and interior items that are located near the surface to be painted are covered with sheets of paper and old newspapers.

Gloves, respirator

To protect your hands, use rubber or latex gloves that fit tightly to your hands. Protect the face with a respirator; this helps to avoid small droplets of paint and protect against a pungent odor.

Where to paint

The best option is to paint the refrigerator outside. But sometimes the owner of the refrigerator does not have this opportunity, so painting is carried out inside the apartment, having first cleared the surrounding space.

Power outage

The refrigerator is disconnected from the network before processing and subsequent painting. You must wait until the elements located on back wall, cool down, then start processing.

Incomplete disassembly

The internal parts of the refrigerator are pulled out, the shelves are dismantled, and the containers are removed. Removable parts are painted separately.

Information! The recesses from the fasteners are covered with film to prevent paint from getting inside.

How to paint correctly

Normal way

An even layer is achieved by covering the surface from top to bottom. Drying of one layer takes from 40 minutes to 1 hour. Then the surface is re-painted. A roller is used to paint the lower part; brushes are used to paint the narrow parts.

With a simple pattern

Simple designs are applied to the dry base of the refrigerator using stencils or masking tape, which will help to apply stripes. The decoupage technique is considered difficult, but it can be mastered with the help of video tutorials.

At the car service

Old refrigerators are often sent to a car service center. Painting a metal surface is similar to the type of airbrush painting that is used on cars. Small refrigerators are covered with selected designs in a car service center at an average price of 8 thousand rubles.

A hand-painted refrigerator is made glossy with the help of an additional varnish coating. The shine will make the unit more impressive; such surfaces fit perfectly into different interiors. When choosing a paint shade, you should keep in mind that dark and bright colors are difficult to repaint, so you need to take into account that a bright refrigerator will remain in the interior for a long time. Before putting the refrigerator back in place, you should make sure that all surfaces are dry. When applying paint from a can, maintain a distance of at least 30 centimeters from the surface to be painted.

Any equipment tends to break down. And the appearance of the refrigerator may deteriorate, not only externally, but also internally. And everyone who has a working cooling unit sooner or later has the question of how to paint a refrigerator.

Due to the poor appearance of the unit, it is often simply thrown away and sent to the store for a new one. And not everyone knows that painting can easily fix all the cracks and hide the peeling paint. This method, like pasting the surface with self-adhesive decorative film, will perfectly update the design. However, the film requires enormous patience, attention and skill, otherwise it will end up with bubbles or, even worse, wrinkles.

The process of painting a refrigerator at home is much simpler, but there are also certain features. Let's take a closer look at how you can paint a refrigerator.

How to paint a refrigerator with your own hands and choose a suitable coloring agent for this? It is worth remembering that the surface of the refrigerator is not the most ordinary, and it is not suitable for any paint will do. The chosen paints for the refrigerator should not only decorate the unit, but also protect its casing from mechanical damage. There is no point in spending money on purchasing an anti-corrosion agent, since it is assumed that the device will always be in a dry and warm kitchen.

Also, painting the refrigerator with fire-resistant paint is not necessary, because according to the operating rules it is forbidden to use this unit near a fire.

So, what paint should you use to paint your refrigerator? The paint characteristics should be as follows:

must be tintable;
maintain an even layer on a vertical surface;
must be elastic, since the temperature coefficient of expansion of metal in refrigerators is quite high;
resistant to detergents.

Considering the above, we can safely say that waterproof metal paint is perfect for interior work. But the composition of paint for metal surfaces can be different:

Zinc.

Alkyd.

Organosilicon.

Nitrocellulose.

Epoxy.

Acrylic.

Oil.

Polyurethane.

But how to paint a refrigerator? There is no need to go into details of the contents of each of the above compounds. Here are the types of paints suitable for our purposes:

paint with acrylic composition for metal surfaces;
automotive nitro enamel;
epoxy or polyurethane paint You can also paint the refrigerator.

Acrylic dyes are absolutely safe, as they do not contain toxic substances. They can easily paint an old refrigerator, thereby transforming it perfectly. In addition, this type represents a wide variety color range. Apply with a brush, or even better with a roller, if necessary, in two layers.

The car dye is beautiful and durable, sold in cans. It must be applied by spraying. However, this dye has disadvantages, for example, its high price, it is toxic, during the process it is necessary to cover the face, body and surrounding objects, since splashes are not controlled during the process. After painting, you will have to remove any accidentally painted areas with a solvent.

The latter epoxy or polyurethane paint can be used to paint a refrigerator, but it is difficult to prepare due to two components that need to be prepared correctly. However, it is the most resistant and durable of the above.

On video: how to update a refrigerator.

Surface preparation

Over time, the refrigerator becomes covered in dirt, which is difficult to clean with ordinary detergents. To treat the surface of the refrigerator before painting, you will need the following:

means for removing hardened and greasy stains;

sponge with abrasive coating;

two rags, one wet, the other dry;

fine-grained sandpaper;

any degreasing liquid, such as gasoline, kerosene, acetone;

masking tape or cling film;

for lining, unnecessary sheets of magazines and newspapers;

gloves, respirator.

It is not necessary to use a primer before painting. How to paint a refrigerator at home? It is best to paint outside in good weather. Make sure that it is not windy, otherwise the wind will create streaks of paint on the surface. If this is not possible, then simply ensure good ventilation in the room.

The refrigerator must be disconnected from electricity and all internal shelves and trays must be removed. WITH outside thoroughly rinse the device with a sponge and detergent. Next, you need to remove the old paint layer of the refrigerator with your own hands, to do this, use sandpaper. This way all cracks and chips will be sanded down. In addition, the paint will have good adhesion to the surface.

When everything is at hand necessary materials, you can begin to prepare the unit and the surrounding area for the painting procedure:

Unplug the unit and remove all shelves and trays.
Wash the surface very well with detergent and a sponge.
Now you need to remove the old coating. Use sandpaper. Thus, you can not only remove part of the coating, but also sand all the unevenness and cracks. And the paint will adhere better to the surface.
Now wipe first with a wet, then with a dry cloth. Try to choose a fabric that does not leave lint.
Degrease the surface with a special solution.
Cover with cling film or masking tape those parts that will not be painted, such as decorative strips, handles, rubber seals and service holes.
Now use newspapers and magazines to protect the floors and nearby interior items from paint.

How to repaint a refrigerator different colors while creating beautiful ornaments? If desired, you can depict any pattern or ornament using masking tape. In this case, during the procedure you need to ensure that the tape adheres tightly to the coating.

Remember that the room in which painting is carried out must be well ventilated. It is better to paint this equipment outside.

How to paint

So, if the surface outside the refrigerator has passed all stages of pre-treatment, you can start painting it a different color. It is important to remember to wear rubber gloves and a respirator.

If you choose spray paint, it should be applied at a distance of approximately 30 cm from the surface. The coloring material will lay down beautifully and evenly. Drive evenly from left to right and do not linger in one place. Otherwise, smudges will occur or the layer will be too thick. If a thick layer does form, use a solvent or do not paint the area when applying subsequent layers.

Approximately 2-3 layers should be applied. Take a break for half an hour, so each previous layer can dry out.

A spray bottle of paint and a can of spray paint allow you to apply smooth, even coats to the surface.

When choosing this painting method, you should especially cover all surrounding surfaces with film and newspapers. Better yet, move the refrigerator outside. But only if the weather allows you to paint the equipment.

If the paint you choose needs to be applied with a brush and roller, then you should also be careful here. Take some paint and paint vertically or from left to right. Apply the second layer only after half an hour. Use a small brush to paint hard-to-reach areas.

If there were any flaws during painting, the third layer will successfully hide them. By painting the unit with a brush, you will not have to wash many household items, as well as walls from paint. The brush is great if you decide to paint indoors.

Painting with a brush may leave marks and streaks. And if you don’t immediately take measures to smooth them out, then all the flaws will immediately be visible after the dye has dried. Use a sponge to remove streaks, but do this while the paint is fresh.

Leave the painted refrigeration unit for several hours until the new coat of paint has completely hardened. Is it possible to give the paint any effect? Yes, give it a glossy shine, a matte effect, or simply protect it with acrylic varnish in aerosol form.

Refrigerator decoupage (1 video)

A refrigerator, like any equipment, has the ability to not only break down, but its external and internal appearance can also deteriorate.

Of course, all this happens over time, but it still happens and these problems must be solved somehow.

Very often, when it comes to refrigerators, it happens that the paint falls off and cracks; in this case, in order not to buy a new one, you just need to paint this refrigerator. How to paint a refrigerator

How to paint a refrigerator at home

In order not to take it for repairs - this question interests many as it will not only save money, but also time.
Painting the refrigerator with your own hands.

In order to paint the refrigerator yourself you need:

1) you need to take some unnecessary newspapers or just paper, rags, detergent, paint, a roller, a foam tube and the most common tape;

2) the refrigerator is unplugged - pull out all the devices that are in it - various drawers, an egg stand and more. Then you will need to thoroughly wash this refrigerator - especially to remove dust;

3) You will need to lay newspapers or paper around the entire perimeter around the refrigerator, as well as under the appliance. This is done so as not to stain the floor surface;

4) must be done good level the room where the refrigerator will be painted;

5) before starting work, you will need to check in some area that is difficult to see whether the paint color is chosen correctly;

6) Now you can begin the painting process itself - to do this, use a roller to evenly paint the area of the refrigerator from left to right. If an aerosol can is used when painting, it will need to be kept at a distance of approximately 30 centimeters from the area of the area being painted.

You can see what a painted refrigerator looks like in this photo.

What paint to paint the refrigerator

A very important question - since, first of all, a refrigerator is not a simple material, but a technique, so any paint will not work here and it is best to use:

— Aerosol epoxy paint;

- Acrylic paints;

— Automotive enamel;

After this, the question arises about how to paint the inside of the refrigerator. In order to paint the inside of the refrigerator, the same types of paints are suitable as for external use.

The main thing to remember here is that before painting the inside you will need to remove all the fittings, and if this is impossible to do, then cover it with tape.

In order to paint the inside of the refrigerator, it is best to use a bone approximately 5 - 7 centimeters wide.