Search for tenders – This is one of the most critical stages when participating in procurement. The final result of participation in the tender largely depends on the effectiveness of the search. Therefore, the participant should pay special attention to organizing the search for orders.
Where and how to look for tenders?
To find the answer to the question posed, you should first decide on the procurement market that will be most interesting to you. Whether you are interested in commercial procurement, state and municipal procurement in accordance with 44-FZ or corporate procurement in accordance with 223-FZ will determine which tools are best to use for searching for tenders and which will be of no use.
The development of the system of state and municipal procurement in accordance with the principles of openness and efficiency of procurement carried out at the expense of the budget has led to the creation of a single portal for posting information about such procurement, which is located at www.zakupki.gov.ru.
It is worth noting here that until the beginning of 2010, the state and municipal procurement market was characterized by difficulties in finding procurement, which led to significant difficulties for procurement participants and, accordingly, limited competition. To solve this problem, the Government of the Russian Federation and the legislator have determined that absolutely all state and municipal procurements must be published on the website of the Unified Information System in the field of procurement.
If information about the purchase is not posted there, this actually means that the purchase has not been announced and is not valid. But Customers are given the right, in addition to the procurement website, to publish information in other sources of information at their discretion. But since such information in any case will be duplicate in relation to the procurement site, this is not interesting for searching for orders.
A similar situation has developed in the field of corporate procurement in accordance with 223-FZ, where Customers are also required to publish all information about competitive procurement methods on the website zakupki.gov.ru, and have the right to additionally publish such information on their own websites and systems.
Consequently, the only sufficient source of information will be the procurement website zakupki.gov.ru, but with some reservations, which will be discussed below.
But in the commercial orders market the situation is exactly the opposite. Since Customers of commercial orders independently determine the rules and procedure for purchasing, they independently choose, based on their own preferences, the place where information about the order will be placed. At the moment, on the Russian market alone there are more than six thousand different platforms offering services for publishing orders. This amount makes manual search completely ineffective, and increases the need to automate this process. Various services and programs cope well with this task.
When answering the question of how to search for tenders, it is worth listing the main ways to search for them.
Manual search is suitable for those procurement participants who do not participate in procurement on an ongoing basis and choose government or corporate procurement.
The use of paid and free services will significantly increase efficiency and improve the search for tenders. The tender search system significantly saves your time resources, takes into account the parameters you specify and offers options that you most likely would not have found in a manual search.
Monitoring of tenders can also be entrusted to a separate specialist who will deal with this on a permanent and professional basis or to a third-party organization. But the latter option, from a practical point of view, has not proven itself in the best light, since such an organization, not understanding the specifics of your activity, offers tenders that are not interesting for your participation.
It is worthwhile to dwell in more detail on the possibilities that any tender search engine offers. Initially, it is worth making a reservation that any system will not solve all the problems associated with searching for tenders by pressing one button. Of the proposed options, in any case, you will have to manually analyze tenders to determine the feasibility of participation, many of which most likely will not suit you. But in any case, manual search comes down to an acceptable number of tenders that meet only your basic requirements. Any program for filtering orders has its advantages and disadvantages, which will be strictly individual for you. Therefore, any such program must be tested beforehand.
Free tender search
As you know, nothing is free in our world, so a free search for tenders is a very relative concept. As a rule, such programs and services either remain free for a short time or completely leave the market due to the unprofitability of the project. Therefore, the best free program for searching for tenders in the field of government and corporate procurement is directly the functionality provided by the website of the unified information system. But it also has significant drawbacks. The set of parameters, filtering and accounting is very meager. Also, this site is often inaccessible and maintenance work is being carried out on it. But if, in terms of the set of necessary parameters, it suits you, and you are ready to wait for its functionality to be restored, then the EIS website is ready to offer you the largest database of published procurements, among which you can try to find a tender that suits you.
Free search for tenders on all sites is best done by services that offer shareware use. This way you can familiarize yourself with their functionality and, if necessary, purchase this program.
Paid search for tenders
Since services and programs are just a tool in your hands, you must remember that the final result depends solely on your skills. In order for a paid search for orders to bring the expected result, you must follow the following rules:
- Check the OKPD codes indicated by Customers that correspond to your field of activity;
- Select keywords that can be used in the description of the procurement object;
- Use saving search parameters so as not to repeat the same settings every time;
- For the EIS website, subscribe to the RSS feed of search results using saved parameters;
- Perform the search as often as possible, the optimal schedule would be at least once a day;
- Monitor the selected order for cancellations or changes and make appropriate changes to your application in a timely manner;
- If there is a constant flow of tenders that interest you, use the opportunities provided by paid services, which we will discuss below.
The best programs (services) for searching for tenders
The easiest way to find a tender is to use full-fledged search services, whose services are naturally paid.
Tenderplan - http://tenderplan.ru/
This service offers services not only for searching for orders, but also for planning work with them. It is possible to record orders, configure the distribution of tenders, and allow you to find an order. The subscription fee does not depend on the amount of access provided.
Purchasing360 - http://zakupki360.ru/
This service is best characterized as a system of not only search, but also tender analytics. An almost endless number of search parameters, many convenient filters, analysis of possible competitive offers and participants, as well as predicted price reductions, all this allows you not only to search for orders, but also to effectively analyze them.
Kontur.Purchases - https://kontur.ru/zakupki
A very simple system that does not suit its functionality. There is everything you need, and everything is extremely simple and clear. At the same time, the subscription fee is cheaper than many competitors.
IstBudget - http://www.ist-budget.ru/
A distinctive feature is that the developers have clearly encountered the public procurement market, since there are many tools for Customers, not only for participants. Clear, functional, modern design makes it easy to get started.
Seldon - http://seldon.ru/
The largest and most famous tender search engine. Extensive search and analytics capabilities allow you to participate in tenders as efficiently as possible. A distinctive feature is the possibility of two-level filtering of search results. Something similar is also implemented in the tender plan. It's all not cheap, but it's really worth it.
Conclusion
To organize an effective search for orders and understand where to look at tenders and where to look for tenders, you should register in all of the listed programs and services, try the opportunities they provide yourself during the free period and choose the one that is most suitable for you. This is the only way you can find a service that will help solve your specific problems.
Via electronic platforms. In addition to the complexity of the process, the search can also be quite expensive. In order to rationally select tenders and participate in them, you need to have clear knowledge about tenders, where tenders will be placed and the individual characteristics of each order in order to choose the right order for yourself without spending extra money, and maybe even for free.
How to find a suitable tender?
First of all, you need to select the criteria for a suitable order in order to save time. Simple and accessible rules will help with this issue.
- Features of the order. You need to decide what services, goods or purchases the organization can provide in order to narrow down the choice of orders. Each tender has its own specific scope, for example, medicine or aviation.
- Search for accommodation. Placement may be through an auction, open tenders or requests for quotations. Provided that the organization is small, it is recommended to look for requests for quotes, because they do not require an electronic digital signature, and the documents for submitting participation in the tender are the simplest. Placement through auctions involves financial investments, availability and registration on portals.
- Region of application. This is the main criterion for . Small organizations are recommended to participate in the tender only in their constituent entity of the Russian Federation in order to avoid the unpleasant consequences of failure to complete procurement at the federal level.
- Execution deadlines, as well as the presence of an advance payment, payment methods and other minor nuances in the order.
Where to find a suitable tender?
The tenders posted are divided into three categories, each covering its own resources. It makes no sense to search for tenders on all sites at once; you just need to decide which procurements you have the opportunity to participate in, and only after that start searching for sites and portals.
- State procurements. All public procurement tenders under the relevant Federal Law are required to be presented on the single official portal of the Russian Federation. It is very easy to search for such government tenders by registering on the government procurement portal.
- Corporate purchasing. The Government of the Russian Federation has obliged to place such tenders on at least two sites. This is the official government procurement portal and the Customer’s corporate website. You can apply for participation in tenders on both platforms or on just one.
- Private purchases. There are no restrictions on placement, so tenders are posted on any of more than a thousand online platforms, sometimes specially created for publication. Searching for private purchases sometimes takes quite a long time. When searching for private tenders, they usually look not for the order itself, but for the location of its placement.
How to do it for free?
The most important thing in free search of procurement tenders is the understanding that such methods have some limitations, and the time costs may increase. It is quite difficult to track tenders, so there are special free websites and programs whose search engines, if possible, provide the most detailed information on tenders on most sites.
Typically, such sites or programs provide limited free functionality or a trial version, after which you are offered to purchase a subscription. There is also an option to manually search for orders.
Today, there is a common problem with negative results in searching for tenders and with maximum investment of effort.
The reason for such unsuccessful searches is incorrect and sometimes completely incorrect queries, which subsequently results in the search engine giving completely wrong results.
In this case, in order to relieve both your own and your working time, it is recommended to hire and pay an additional employee, whose responsibilities will include manual monitoring of tenders for purchases or services.
On the one hand, this method does not look free, on the other hand, there is no need to pay for participation in dozens of sites; only one person is paid for viewing available tenders.
In addition to searching for orders using keywords, most entrepreneurs place more emphasis on order classification. An identification number is assigned to state tenders in accordance with the established Law of the Russian Federation and applies to such areas of activity as the production and sale of medical equipment, construction, pharmacology, and the provision of socially oriented services.
You can find the OKDP (All-Russian Classifier of Types of Economic Activities, Products and Services) code for the required procurement area in the order card on any commercial or government portal.
When the required purchase has been found, you can take part in it yourself, or use tender support services. Both options have their pros and cons.
All information about ongoing procurement under 44-FZ and 223-FZ is published in the Unified Information System (EIS). To view any of the orders, registration or electronic signature (EDS) is not required. The system searches for tenders across all sites for free. To do this, in the UIS context menu, select the “Procurement” section, and then on the Advanced search or parameter constructor tab, you can clarify the criteria for the required tender, namely:
- Name of the object (keywords, for example, construction, car, medicines, etc.).
- Number of the law in accordance with which the purchase is carried out: 44-FZ, 223-FZ.
- Registration number or identification code (if you are looking for a specific order).
- Method for determining the supplier (auction, competition, request for quotations, or other).
- Range of initial (maximum) contract price.
- Period of publication of the notice, opening of envelopes, deadline for filing applications.
- Name, TIN of the customer or organization that placed the order.
- Level of organization (federal, subject or municipal).
- District and subject of the Russian Federation of the customer, address of the place of delivery (selection on a territorial basis).
- Codes OKPD, OKPD2.
In total, the EIS provides 30 criteria for selecting tenders under 44-FZ and 27 under 223-FZ. Each participant will be able to choose a more convenient approach when searching for information.
Video: how to search for purchases in schedules
Video: how to subscribe for free to the procurement newsletter according to your parameters
Free search engines
The rather convenient EIS filter cannot always be used. For example, due to ongoing maintenance on the site, the search for tenders may not be available. In this case, you can use the services of electronic platforms for free. Each accredited platform provides conditions for searching for the necessary orders: , NEP, Order of the Russian Federation, Roseltorg, Russian Auction House, RTS-tender, auction searches are carried out free of charge using the same parameters as the EIS.
There are also free systems that offer selection of tenders based on limited criteria:
For more detailed information, you need to go to the trading platform or UIS. You will not find any additional information other than what is published in the EIS in such systems.
Paid search engines
For a certain fee, a participant can not only receive a newsletter about ongoing orders in the area of interest to him (both government and commercial), but also receive a forecast of winners, express access to customer data, a package of documents for participation in procurement, etc. The price depends on the volume of services provided and ranges from 1000 to 4000 rubles per month. To understand how convenient a particular service is, you can test it using the free period. It is provided for up to 7 days.
Hello, dear colleague! Today we will talk about how to find a suitable tender. This question is most often asked by newcomers who are just starting to participate in procurement. Therefore, in this article I tried to answer this question in as much detail as possible so that you have a clear vision of what and where to look. So let's get started.
1. What is a suitable tender?
This concept is very subjective, since each supplier has his own idea of a suitable tender. Let's look at the criteria by which you can determine whether this or that tender is suitable for you or not.
- Subject of the tender (this is the supply of goods, performance of work or provision of services corresponding to the field of your activity);
- Type of tender (state, corporate or commercial);
- Placement method (electronic auction, open tender, request for quotation, etc.) You can learn more about all the methods of placing purchases from this video:
- Starting tender price;
- Region of the customer, as well as the address of the place of delivery of goods, performance of work or provision of services;
- Date of the tender;
- Availability and amount of application security;
- Availability and size of contract performance security;
- Terms of contract execution;
- Availability of advance payment.
I have listed only 10 main criteria that are most often used by procurement participants to decide whether to participate in a tender. However, each supplier may have its own list.
2. Where to look for tenders?
In order to answer this question, first of all you need to determine what kind of tenders you will look for: state (within the framework of 44-FZ), corporate (within the framework of 223-FZ) or commercial?
According to the requirements of 44-FZ, all government tenders must be placed by customers in the Unified Information System (UIS), and before putting it into operation on the Official website of the Russian Federation for placing orders - www.zakupki.gov.ru. Those. Absolutely all government procurements of the Russian Federation are posted on this resource, and you should look for them here.
Corporate procurement within the framework of 223-FZ is also posted on the website procurement.gov.ru. However, in parallel with posting on the official website, such information can also be posted on the corporate resources (websites) of these organizations. Those. You can search for such tenders both on the website www.zakupki.gov.ru and on corporate websites.
If you plan to take part only in government or corporate procurement, then the official website will be more than enough for your work. However, there is one point that I will talk about a little later.
With commercial tenders the situation is much more complicated. Currently in Russia there are more than 6,000 different commercial platforms where information about tenders is posted and procurement is carried out. It’s unlikely that anyone can manually “monitor” such a number of sites, so to search for commercial tenders they use various search engines or programs, which we will talk about later in this article.
3. Tender search options
Let's take a look at what search options exist.
First option – manual search.
This option is suitable for small organizations or individual entrepreneurs who occasionally take part in procurement, mainly in government procurement.
Second option – search using paid and free search services or programs.
This option, in my opinion, is more preferable for most organizations, because... allows you to perform a full search of both government and commercial procurement, and also significantly reduces the time spent on completing this task.
Third option – entrust the search to another specialist.
This option is good because you can entrust the search for new tenders in your organization to a specific employee. However, it is necessary to first teach him how to do this. And also equip it with additional services or software.
Fourth option — resort to the help of an outsourcing company.
In my opinion, this is the most irrational and costly option, which has not worked well in practice. As a rule, organizations providing such services have a lot of diverse clients. And the whole problem is that the employees of the outsourcing company do not delve into the specifics of the activities of a particular client. Yes, they don’t need it.
Therefore, 90-95% of the tenders they find will be thrown into the trash bin. Such companies use paid programs to search for tenders, conduct a selection based on customer search queries, and then send the found tenders by email. This is where a reasonable question arises. Why, then, pay someone to do something that you can do yourself, armed with such a program? You can get free access to one of these programs.
4. Paid and free resources for searching for tenders
At the end of 2014, my colleague Andrey Pleshkov and I monitored paid and free resources for searching for tenders, tested their functionality and quality of work. Below you will find two tables with paid and free search engines and a short summary.
The market situation is constantly changing, some search engines cannot withstand the competition and cease to function, others appear in their place. Therefore, do not be surprised that by the time you read this article, some of the search engines presented below may no longer function.
free search services.
Free search services
In the far right column there are links to so-called “Dead” services, the information on which has not been updated for a long time. Those. If you suddenly stumble upon one of the services indicated in this column, then know that there is no benefit from it and it is absolutely useless for work.
And finally, the middle column “Search services with limited search, lengthy registration and other problems.” All of these services are available and working, but for various reasons they are not included in the main list of preferred search services. Either it is a lengthy registration, or a limited and inconvenient search, etc. Try to access these resources yourself; it is quite possible that one of these services will also interest you, and you will take it into service.
The figure below shows a table with paid search services.
Paid search services
In the left column I have indicated the most popular and noteworthy search engines. The remaining two columns present other paid search services, which, in my opinion, are less useful and convenient to work with. But this is my personal opinion.
As I mentioned above, my colleague and I, having not found any structured information on searching for tenders on the Internet, decided to correct this gap and released a full-fledged training video course “How to effectively search and find tenders?” consisting of 46 video lessons (that's more than 3 hours of video). If you are interested, you can go and learn more about this course.
5. Search for purchases on the websitewww. zakupki. gov. ru
Finding the right tenders on the official website is quite simple and intuitive. However, there is one point that I promised to tell you about at the beginning of this article. This point lies in the unstable operation of this resource, since it is constantly subjected to heavy load and endless modifications by developers. From time to time it does not work correctly or even hangs. But let's not talk about sad things, I hope that over time this problem will be eliminated. So, in order to start searching for tenders, you need to go to the main page of the site.
Quick search
On the main page of the site you will see two tabs “Quick Search” pos. 1 and “Advanced search” pos. 4.
The quick search mode allows you to search by order name, lot name, customer name, as well as by notification number. Line for entering a search query pos. 2 contains 122 characters (including spaces).
To start the search, enter the name of the order, customer, lot or notification number in the search query input field and click on the “Find” button pos. 3 located on the right.
After clicking the "Find" button, the search is performed and the results are displayed in the central part of the page.
The search is performed in the combined register of orders and purchases using the entered search query (i.e., both for purchases carried out within the framework of 44-FZ and for purchases carried out within the framework of 223-FZ).
But I want to immediately warn you that a quick search is convenient only if you know the name of the order (or part of it), the name of the lot, the customer, or the notification number. For a more detailed search, it is recommended to use the advanced search.
Advanced Search
In order to get into the advanced search, you need to go to the corresponding tab on the site.
After clicking on this tab, an advanced search page will be displayed in front of you in the central part of the site.
To start the search, you must enter a search query in the search bar located at the top of the page in accordance with the displayed prompt: “Enter the whole or part of the notification number, the name of the purchase (order) or lot, the full name of the Customer.” And only then configure the necessary search parameters.
In this article, I will not go into detail about how to configure advanced search parameters, since this is a fairly large topic that deserves its own article. Try going to the website and practicing setting the parameters yourself, I’m sure you’ll figure it out on your own. If not, then you can always turn to ours for help.
6. Seldon – procurement search system No. 1
Today, the Seldon system is the undisputed leader in the search engine market. This is not just a search engine, but also a powerful analytical tool.
In order to describe all the capabilities and advantages of this system, more than one article will be required, so I will limit myself to listing only its main capabilities:
- Collection of information on government, commercial, international, and planned procurements;
- Providing fast, accurate and efficient search through the largest database, including archival databases of purchases, contracts, legal entities and individual entrepreneurs;
- Generating various analytical reports based on available information, as well as providing statistical data on customers and suppliers;
- Setting up various “smart” filters and complex work with information;
- Integrated access to the Garant legal system and the database of arbitration cases.
If you are interested in trying this system in action, you can submit a request for test access here. It's better to try once than to hear a hundred times.
7. How to quickly find the right tenders?
So, in order to quickly find tenders that interest you, you need to remember a few rules.
Rule #1. You must know the OKPD codes that customers use when posting information about procurement of goods, works or services that correspond to your field of activity.
Rule #2. You must know the keywords that can be used by customers in describing the item being purchased.
Rule #3. You should use saved search filter settings so you don't have to set the parameters manually each time.
Rule #4. You must subscribe to the RSS feed of search results based on the configured search parameters (this rule applies to the site www.zakupki.gov.ru).
Rule #5. You should search for information about new purchases at least once every 2-3 days.
Rule #6. You must regularly monitor changes in information on the selected purchase on the site (as changes may be made to the purchase notice, clarifications may be given, or the purchase may be cancelled).
Rule #7. If you regularly participate in tenders, you should whenever possible use paid search engines and software, as this will save you a lot of time.
This is where I propose to conclude today’s article. If something remains unclear to you, then ask questions below in the comments. I hope that this material was useful to you, and if so, then share this article with your friends and colleagues on social networks. I wish you good luck and an effective search!
Hello, dear colleague! This article will focus on programs for searching tenders and auctions. This is a sore subject for most procurement participants, because... searching for procurement is a very important and at the same time labor-intensive stage of participation in tenders. The final result of your participation will depend on how effectively you search and find the tenders you need. Therefore, today we will talk about tools that will make your procurement search work more convenient and efficient. So let's get started...
Tender search software - a panacea for problems?
Many suppliers mistakenly believe that there is some kind of “miracle program” for searching for procurement that can save them from all problems. This program will provide information in batches about the best and most cost-effective purchases, and the participant will only have to click on any of them, study the conditions, prepare his application and take part in the auction. If you are still looking for such a program, then I can disappoint you; there are simply no universal programs that meet all user needs in nature. Any program (search engine) has both its pros and cons. And each procurement participant selects for himself exactly the program that best meets his needs and requirements. And in order to choose the right tool for yourself, you need to test more than one program.
Paid or free search programs
Today, the Internet offers many paid and free solutions for searching for tenders. And in order for you not to completely drown in all this variety of offers, I have posted a selection of such services in mine. If, to search for government and corporate procurement, you can get by with free services, then for a full-fledged search for commercial procurement, free services are absolutely useless. Those. If in your work you focus on commercial tenders, then you should seriously think about choosing a paid search engine. And we will talk about which of them are most preferable below.
Paid search services – which one is better to choose?
And so, if you have already read my article, then you probably noticed that I have identified only 7 preferred paid search services:
— //www.ist-budget.ru/
— //seldon.ru/
— //findtenders.ru/
— //tenderplan.ru/
— //zakupki360.ru/
— //meltor.ru/
— //kontur.ru/zakupki
In my opinion, these services are the most effective and convenient to work with. Of course, you can independently test other services presented in the table. But my colleague Andrey Pleshkov and I have already done this work for you, and have selected the best services to date. You can trust our opinion, or see this from your own experience. The choice is yours.
Register and test
Below I have provided short instructions with graphic explanations on how to register in these systems and get free test access to them.
Registration in the Ist-budjet system
In order to register in the ist-budjet system, you need to click on the “Registration” link on the main page of the site.
And then in the window that appears, enter the required data in the registration form and click on the “Finish” button. Or you can register using your profile on Google, VKontakte or Mail.ru.
In order to familiarize yourself with the cost of the system’s tariff plans, you need to go to the “Services” tab on the main page of the ist-budjet website. After this, a window will open in front of you with a description of the composition of the tariff plans, as well as a description of the possible services that you can use on the site.
The “Search” tariff plan is free, but you can order free access to such tariff plans as “Search+” and “Analytics”.
In order to learn more about each of the tariff plans, as well as its cost, you need to click on the button with the name of the corresponding plan in the “Description of tariffs and prices” section.
Registration in the Seldon system
You can get free test access to the Seldon system by filling out the form below.
Instructions for filling out the form:
- In the “Your name” column, please indicate your full last name, first name and patronymic.
- In the “Your E-Mail” column, indicate your email address, to which we will send you a username and password to log into the system.
- In the “Subject” column, indicate “Test access”.
- In the “Message” field, indicate your contact phone number, at which our manager will contact you for an introductory briefing on registering in the system. And also indicate the TIN of your organization so that the system will generate a login and password for you to log into the system.
- Next, enter the code from the image and click on the “Submit” button.
- Within one day after submitting your application, our manager will contact you to provide access to the system.
Registration in the Findtenders system
Registering with findtenders is quite easy. To do this, on the main page of the site you need to click on the “Registration” button
and enter your registration information in the window that appears. After that, click on the “Done” button.
You can view the tariff plans and their costs by clicking on the “Tariffs” button on the main page of the site. After which you will be taken to a page with a detailed description of tariff plans.
Registration in the Tenderplan system
The tenderplan search engine provides its users with free two-week access to the system. In order to register in the system, you need to click on the “Registration” button or the “Get Started” button on the main page of the site.
After clicking one of these buttons, a registration form for entering data will open in front of you. Fill in the information and click on the “Start using” button.
Tariff plans of the tenderplan system can be found by clicking on the “Tariffs” link on the main page of the site. After this, a window will open with the cost of tariff plans.
Registration in the Zakupki360 system
In this system, registration is also simple and straightforward. Right in the central part of the site you will find the “Get free access” button. Click on it.
A registration form will open in front of you. Fill in the empty fields and click on the “Register” button. Here you can also register using one of your social media accounts.
Tariffs can be viewed by clicking on the “Tariffs” tab on the main page of the site in the upper right corner. After clicking on this tab, the following page will open in front of you:
Registration in the Meltor system
To register in the meltor system, you need to find the “Registration” button at the top of the main page of the site and click on it.
After that, fill in the empty fields in the window that appears and click on the “Registration” button.
The tariffs tab is also located at the top of the site on the main page. After clicking on this tab, the following window with tariffs will open:
Registration in the Kontur system
To register in the kontur system, you need to follow the link //kontur.ru/zakupki and click on the “Try 7 days free” button.
In the registration form that appears, you need to fill in all the empty fields and click on the “Register” button.
Tariffs can be found on the page //kontur.ru/zakupki/price
And so, in this article I gave you links to 7 paid services for searching for tenders, which, in my opinion, are the most preferable for work. In order for you to choose the right service for yourself, I strongly recommend registering with each of them, and during the free test access, experience all the available functionality to the maximum. This is the only way you can understand which one will best cope with your tasks.
That's all for today. See you in the next articles. If the article was useful to you, then like it at the end and share this material with your friends and colleagues on social networks. Good luck with your search!