Installation craze beautiful fences in Russia it is dictated not only by fashion trends. With a competent approach to the process, fences can be installed on plots of 6, 8, 10, 12, 15 or 20 acres for a very reasonable amount.
And if a high-quality product is available to the majority of consumers, then its fate is determined - it will become popular.
The information in this article will help you understand the principles of calculations and production of fencing for urban and summer cottages. Having understood how much fencing is needed for 8 acres or another standard area of land, you can choose and install fencing at the best price, saving, as they say, wisely.
How to calculate the length of a fence?
First, let us recall that one hundred square meters is a square of land with a side length of 10 meters. Thus:
- area of 1 hundred square meters - S = 10 x 10 = 100 m²;
- plot area of 10 acres - S = 100 x 10 = 1000 m².
To install a fence on 10 acres, you need to calculate the perimeter of the site. As we remember from the school curriculum, perimeter is the sum of the lengths of the sides of a figure. For example, for a rectangular plot with sides of 20 and 50 meters, the perimeter will be calculated as follows:
- P = (20 + 50) x 2 = 140 meters.
Thus, a fence of 10 acres will have a length of 140 meters, provided that the site is completely covered. By analogy, the length of a fence of 6 acres can be calculated, as well as for other formats.
Technology for calculating materials for fences
There are also no big difficulties here and even, according to experts, you can do without drawings. It is enough to remember a few important nuances:
- main support pillars installed in each corner + along the edges of the gate and wicket openings;
- the number of auxiliary supports depends on the estimated width of the covering material;
- The height of the fence directly affects its cost.
As an example, let’s try to find out how many meters of fence per 10 acres will be needed, provided that the profiled sheet marked C8 is chosen as the flooring, and the support posts are made from a 60x60 mm profile pipe. Let's say we have a plot of 30 x 33 s with total area 990 m² (almost 10 acres). We divide the length of each side of the site by the width of the profiled sheet (for example, 1.15 m) - we get 107 pieces.
If the supports are brick, the number of metal profiles will decrease due to the thickness of the pillars. We will consider the gate and wicket as a separate side using solid sheets of metal covering. If the number turns out to be fractional, then we round it up so as not to get a hole in the fence.
We calculate the footage of the log based on the length of the profile and the design quantity (3 m each). Simple math also works here. We divide the total footage by 3, rounding up and multiply by the number of joists used in the fence (usually 2 or 3 rows).
In total, the calculation showed that for the simplest fence made of corrugated sheets and metal supports, we will need 107 sheets of corrugated steel, 246 meters of thin pipe for making logs. The number of main and auxiliary supports, provided they are spaced every 2.5 meters, is 49.
Next, we place a table that gives the basic calculations for the manufacture of fences in the MASTEROVIT company. Here you can clearly determine how much a fence of 10 acres costs for a house within the city or a fence of 6.8 acres (a standard summer cottage).
Non-standard plot shapes
What to do if the landscape of your site is uneven or the area has the shape of an irregular polygon? The easiest way is to seek help from a specialist. Managers of our company will help you calculate for free the approximate cost of a fence for 12, 15, 20 acres (or any other area), while at the same time giving advice on choosing materials taking into account the characteristics of the area.
The portfolio of the MASTEROVIT company contains photos of projects with an exclusive design created for a specific request.
Photo No. 1: Finished fence for a plot of 10 acres
Photo No. 2: Finished fence plot of 12 acres
The main factors in determining the final fence price
The cost of fencing is primarily affected by:
- costs of materials (concrete, brick, rolled metal, pipe, profile, accessories);
- fence dimensions (length and height);
- installation method (presence of a foundation or spot pouring, type of supports, cost of installation services).
It is important to determine in advance whether it will be necessary to pour a foundation for the fence or whether you can only dig in supports and reinforce them with concrete. The owner of a plot of land in a forested area, marked for the first time, will not be able to erect a strong house and a fence until he levels the landscape. All these aspects “come to the surface” during a geodetic survey, which is recommended to precede any construction on the ground.
It is difficult for an amateur to take into account such a number of nuances. That’s why it’s really worth contacting specialized companies to build a high-quality fence. Professionals will do everything correctly, using sophisticated technology, and will not conduct experiments on your site.
How to choose a quality fence manufacturer?
In addition to the well-known truth that preference should be given to experienced teams working in accordance with GOST standards, there is another simple secret. Once you have a rough estimate, estimate the cost levels for materials and services. If the work costs about the same as the materials or less, feel free to sign the contract - this is a good price.
The need to measure certain areas of land has appeared since the time of the resettlement of ancient tribes to other territories.
Plots of land were measured in units that varied depending on the era. Along with the evolution of mankind, agricultural affairs and industrial relations, the method of measuring land has improved.
Each nation had its own measures for measuring territory, which created inconveniences during foreign trade. In Russia, the first measurements were verst, mile, tithe, arshin and square fathom. In order to eliminate inconveniences, society decided to create a universal measure for measuring plots of land.
Only in 1960 did the square meter become the universal unit for calculating area, and distance and length began to be measured in meters.
Purpose
IN Russian Federation The area of a plot of land is measured in hectares. In most cases, the size of the land area for payment is calculated in hectares (Ha). land tax. How to calculate 1 hectare? You can imagine this as much as you like both in the form of plans and in the form of tables.
Plan for calculating land area:
- The length of a certain part of the earth is measured;
- Width is calculated land plot;
- The area of the measured territory is determined.
- The resulting calculation result is converted into points and its own coefficient is used.
Ha are used in the areas of urban planning, in agriculture, when designing land management works. In addition, this unit of measurement is also used to calculate the size of a football field.
Units of measurement of area also include the so-called hundred (Ar) - a measure of the calculation of a land plot during purchase and sale.
Hectare
A hectare is usually understood as a unit of measurement of area. In size, 1 Ha is equal to the area of a square with a side of 100 m. The concept itself appeared in human speech after 1917, and its abbreviated version - Ha - was formed 13 years later.
If the width and length of the measured area is 100 m, its area is 1 Ha (10,000 m²).
Area calculation
- To find out the area of the plot, you need to multiply the resulting length by the width;
- If the figure is more than 10,000 m², then the land plot is more than 1 hectare;
- In order to determine the exact area, the resulting figure in hectares should be divided by 10,000.
Sotka
The term weaving means a plot of land with an area of 1 Ar (the diameter of a rectangle with a side of 10 m, a measure of territory in France).
1 Ar is equal to 100 m², respectively 0.01 hectares. For clear example, mark a starting point, take 13 small steps, turn 90 degrees and walk the same amount. The resulting square as a result of a little calculation is the Ar of the land plot.
Weaving is also called one hundredth of something. This type of calculation is convenient both for construction and sale, and for sowing land plots.
Ratio of hundred square meters to hectare
People who are interested in buying a plot of land often ask the question: how many acres are in a hectare? After all, it is there that we often encounter such a concept as weaving. This is where the question arises: how many acres are included in 1 hectare?
Based on the previously stated text that 1 hectare is equal to 10,000 m², it is necessary to calculate how many acres can fit into 1 hectare. Let us recall that 1 Ar – square with a diameter of 10 x 10.
So, 1 Ha consists of 100 Ar. With the intention of converting Ar to hectares, you must follow one of the following methods:
- We divide the required number of Ar by 100. The resulting figure is the space of the land area in hectares;
- We multiply the required number of Ap by 0.01.
Let's consider the ratio of calculus measures using the table as an example:
If there is a need to convert hectares to hundreds, you must use this algorithm:
1000: 100 = 10 (An area of 1 thousand is equal to 10 hectares)
In case you don’t have the Internet or a calculator nearby, and you have to calculate hectares and acres yourself, you need to know some features of converting these units:
- 1 hectare is equivalent to 10,000 m²;
- 1 weave is equal to 1 Ar, which, in turn, is equal to 100 m²;
- 1 Ha includes 100 Ar.
Ap/m² ratio
When calculating how many m² are in Ar, you should remember the table above, which indicates that 1 Ar is equal to 100 m². When calculated, this will be represented by the following equation: 10 x 10 = 100 m².
Despite the fact that these measures represent a degree of calculation of area, they are still used in various cases. So, a square meter most often used when calculating the size of living space and small land areas, hectares - when building a city and large plots of land for Agriculture(farms), and Ap are used to measure a territory with a duration and scale of no more than one hundred meters.
Sooner or later the owners suburban areas are thinking about fencing their territory and, accordingly, the need to draw up an estimate for construction. If you want to build a fence at your dacha with your own hands, then you should include in the estimate:
- Cost of materials. To keep your budget minimal and your fence optimal, pay attention to the components and clarify their characteristics. If you want to save money and take thinner, smaller, used metal (especially used corrugated sheets), with the wrong degree of protection, or available material, all this will ultimately affect the beauty and strength of the fence. If you bought unfinished pillars, joists, or gates with a wicket, their production will add to the cost of the final product. Of course, today you can buy everything in Leroy Marlin necessary materials for the fence. But metal and corrugated sheets Leroy Merlin Most likely it will be quite thin, although cheap. But self-tapping screws, fittings for gates with a wicket and other small things necessary for installation will be expensive. Additional factors influencing the cost of the fence include the presence of wickets and gates, double-sided covering of the sheet, canopy, forging and any other decorative elements, as well as a small supply of material. If we're talking about about the need to fence the area with corrugated sheeting and invest in the minimum possible amount, also think about the need for roofing screws, decorative strips on top, mortise locks and some non-standard fittings for gates with a wicket. The fence does not tolerate any excesses to a minimum, so think about the need for concrete work.
- Cost of loading, delivery and unloading to the fence installation site. This important point, which many people forget about when they want to build a cheap fence with their own hands. You will rarely be able to save money here, and even vice versa, because you will most likely order all the components from different places. And if you order profile pipes from a metal warehouse, they are usually six meters long, so cutting them should also be included in the budget.
- Cost of work to prepare the site for installation. Nothing should interfere with the construction of the fence: old fencing, bushes, trees, tall grass, embankments, unnecessary things - along the installation line you need to have a working space of about a meter on each side. Of course, you can do this work yourself.
- Installation cost. It all depends on the complexity of the installation: the number of logs, the installation pitch of the pillars, the method of installation (in concrete or not), the number of gates and gates, whether all components of the fence are ready for installation, whether anything interferes with the installation (soil, buildings along the fence line, neighbors and other). Pay attention to your soil; if it is compacted clay, bulk earth mixed with stones or other heavy soil, then it is unlikely that you will be able to drill through it with a regular gas drill and you will have to resort to additional costs for plugging pipes. And then you won’t be able to put up a fence for your dacha with your own hands cheaply. Standard installation of fences made of corrugated sheets, the price for work per 1 meter will cost from 300 rubles. But fencing companies rarely offer work without material, so installing a fence from corrugated sheets at shabashniks will cost from 70% of the cost of the material.
- Associated costs: electricity, gasoline, paint, electrodes, bits, cutting discs, screws and, most importantly, your nerves.
Let's calculate the approximate budget for a standard fence made of corrugated board for 6 acres. The configuration of the plots may be different, but most often 6 acres is 30 m by 20 m (600 sq.m.), the perimeter will be 100 linear meters. For example:
- a fence of 8 acres is approximately 20 m by 40 m - 120 linear meters. m;
- a fence of 10 acres is approximately 25 m by 40 m - 130 linear meters;
- fences of 15 acres are approximately 30 m by 50 m - 160 lm.
- SNT fences are most often more than 300 linear meters.
To install a fence inexpensively 100 meters long with a gate and a wicket without a foundation, 2 meters high, on 2 logs, we will need 38 posts (metal profile pipe 60x60 mm, wall thickness 2 mm, length 3 meters), 64 logs (metal profile pipe 40x20 mm, wall thickness 1.5 mm, length 3 meters), 87 sheets of C8 corrugated sheets (thickness 0.5 mm), standard gates with a wicket , let's add to this the costs of screws, bits, cutting discs, paint, electricity, electrodes, pole covers, material, delivery and installation.
Offer from the company "Fence at the House" for a fence made of corrugated sheets |
|||
|---|---|---|---|
| as of April 2019 | 130,000 rubles | ||
Do-it-yourself estimate for a fence made of corrugated sheets |
|||
| Name | Quantity | Price | total cost |
| Pillars | 38 | 474 | 18012 |
| Lags | 64 | 189 | 12096 |
| Corrugated sheet | 87 | 700 | 60900 |
| Gate with wicket | 1 | 15000 | 15000 |
| Delivery | 2 | 6000 | 12000 |
| Installation | 70% of the material | 1 | 82605 |
| Other (screws + bits, paint, abrasives, electricity, electrodes, covers) | 1 | 10000 | 10000 |
| TOTAL for April 2019 | 210613 rubles | ||
Approximate cost of a standard corrugated fence for April 2019 on our own in the Moscow region will be about 210,000 rubles. If you use an online real price calculator, the cost of material and installation will be: 120,000 plus 3,000 rubles delivery.
- a 20-meter fence made of corrugated sheets with gates and a wicket will cost 32,000 rubles;
- a 50-meter fence made of corrugated sheets without an entrance - 59,000 rubles, every subsequent 10 meters + 11,800 rubles.
Our company “Fence at the House” works at minimal prices due to coordinated processing on own production large supplies of rolled metal, a well-structured scheme of working with customers and a professional installation cycle on site. We can offer the most competitive price for all our products and therefore we install a lot of garden fences. Thus, if you order a standard fence made of corrugated board from our company, it will be profitable. But you can really save money on a gauge, a strip, roofing screws, and double-sided corrugated sheeting. A significant help to the budget is to order a fence together with your neighbors, but you should take into account the fact that during a joint installation, disagreements may arise regarding the choice of material, color and height.
The word “weaving” is widely used in informal communication between people, especially those associated with land plots. Yes, yes, what gardener doesn’t know how many acres of land are on his plot? The old generation remembers exactly and by heart about their three or six hundred square meters!
And although in official land documents it is required to indicate the area of plots only in hectares, especially when buying and selling, it is still more common for people to hear and count land for a garden in acres.
For interaction with cadastral authorities, the area of the plot is in hectares (ha). In this material, we propose to understand the terminology and units of land measurement, find out what a “weave” actually is and what is its relationship to a hectare.
How many square meters in one hundred square meters?
Whatever the reasons for clarifying the area of your land plot, the dimensions of which you know in acres, the classic conversion from acres to meters will proceed according to the following scheme:
an area of 1 hundred square meters = 100 square meters (1 hundred square meters = 100 m2).
How to measure the area of a plot of land with a simple shape?
It is correct to start measuring by measuring the sides of the area. Having hammered pegs into the corners of the area, using a tape measure, take accurate measurements of their length and width. If the plot is correct geometric shape, then only two sides are needed - length and width. It is better to write down the measurement results in a notepad or enter them into a computer.
But if your site turns out to be asymmetrical, then you need to take measurements of all four of its sides and angles in degrees, or the length of the diagonals - also for recording.
If your garden irregular shape(NOT a square or NOT a rectangular plot), then the method of measuring a plot of land is a little more complicated than multiplying the length and width, but it is quite possible for an ordinary person without special education.
How to determine the size of a plot in square meters
To make the calculation as accurate as possible, you will need a tape measure, several pegs and a notepad to record the measurement results. The entire course of the required calculation follows the laws of the school geometry course, which states that to accurately determine the area of a rectangular figure, you should multiply its width by its length, for example:
- A - length, m;
- B - width, m;
- S - area, m2;
For example, if the length of your plot of land is 70 meters and the width is 40 meters, then the area can be calculated as S = 70m * 40m = 2800 m2, that is, in this case the area of your land is 2,800 square meters.
Considering that 1 hundred square meters is equal to 100 m2, we go the opposite way to convert the data from meters to hundred square meters. This will allow you to obtain correct results of measuring the area of a given land plot. When calculating the number of square meters in a hundred square meters, you need to divide the resulting result by 100, for example:
- plot area - 1000 m2;
- 1000 m2 divided by 100;
- number of acres - 10
If your plot has an irregular geometric shape, but you have correctly calculated its area in square meters, the method for calculating the size in acres remains the same. Large areas are usually measured in hectares, each of which consists of 10,000 square meters or 100 acres.
Calculation of land area online using a calculator
Today there are quite a lot of services and online calculators on the network that allow you to calculate the area of a land plot; just use one of them search engines, for example Yandex.
Keep in mind that online calculator When calculating the area, you will need the exact dimensions of all sides of the site in meters for its algorithm to cope with precise calculation the area of your plot of land.
An irregularly shaped area is more difficult to calculate, and the dimensions of the sides alone will not be enough to calculate the area of the area complex shape. Here you will need to know the dimensions of all sides of the garden, and the size of the diagonals. It’s a little easier if one of the corners of the plot is 90 degrees.
Here is an example of calculating acres of land summer cottage complex shape:
Dimensions of the sides of the land plot, in meters
- Side A-B = 69 meters,
- Side B-C = 46 meters,
- Side C-D = 87 meters,
- Side D-A = 35 meters,
- Lower left corner is straight (90 degrees)
Using these data, you can determine the lengths of diagonals B-D and A-C, and calculate the area of the plot = 3035 square meters (or 30.35 acres).