Manufacturers offer a large number of materials so that each developer can clad the façade of the house to his liking. Of course, stone finishing is one of the most ideal options, but also one of the most expensive. An alternative is panels with an imitation of stone texture, while the material retains all the qualities and practicality, and in some ways even surpasses natural material.
Features of the material
Facade panels imitating stone are divided into two types:
- Having a homogeneous structure, made of PVC and modifications.
- Combined elements with a multilayer structure, equipped with an insulating layer.
Thanks to the presence of expanded polystyrene, combined type profiles have increased thermal insulation qualities and also protect the house well from noise from the street. Sometimes there are foam sheets used as insulation, however, like polystyrene foam, foam is installed without the use of glue by heating.
The peculiarity of the product is its resistance to temperature phenomena and imperviousness to water flows. Moreover, even sharp changes in thermometer readings per day do not affect the strength of the profile in any way; there is no deformation, fragility or other unpleasant qualities. Having a low linear expansion rate, the panels eliminate the appearance of such factors as: peeling, change in stable shape. Well, wide color and the lineup products allows you to select profiles of the desired shade and texture.
Material advantages
The main advantage of the material is its price. It is much lower than natural or fake diamond. Installation work They are easy to do with your own hands, and paneling the house does not take much time. The all-season nature of the processes is also a plus: profiles are attached even in snow or rain, of course, if it is a glue-free technology, otherwise dry and warm weather will be required. Also:
- There is no large dust when working with panels;
- The profiles are light in weight, unlike natural or artificial stone, which means that the weight of the finishing will not have to be taken into account in the project and a strong foundation will not be laid;
- During the installation process there is practically no need to use adhesive solutions;
- The presence of corner fasteners reduces the time of drawing corners;
- The large area of the panels allows you to quickly cope with façade cladding of any size;
- The strength qualities of the panels, resistance to water and snow will serve good service any facade;
- The material from which the building is built does not matter - installation is carried out on buildings of any type and number of storeys.
According to their varieties, profiles are divided into two types:
- Decorative. They are used for covering both the walls of the house and the basement. The variety of palettes and textures will help you choose perfect solution for facing works.
Important! If you choose panels that are fastened to each other, you will not need to install a frame.
- Insulated ones allow you to fulfill two conditions at once: decorate the facade and install additional insulation. At the same time, significant savings on materials are achieved, heat loss is reduced and the risk of mold and mildew formation is minimized.
Thus, stone panels are good substitute natural or artificial material. Service life of 25 years, high strength indicators, no need for professional installation, efficiency of work, minimal load on the foundation and a huge selection color solutions– in many respects facing material superior to natural and artificial stone. Considering that the price of profiles is several times lower, it becomes clear that cladding a house with stone panels is profitable and practical solution problems of aesthetics of any structure.
Step-by-step instructions for installing profiles
It’s worth noting right away that the cladding of the plinth and facade have the same technology, so there is no particular difference in the process
It is worth immediately noting that the cladding of the plinth and the facade have the same technology, so there is no particular difference in the process. The main thing to remember is that to decorate the basement of a house with plastic panels, select products made specifically for basements! Such profiles are slightly thicker and therefore stronger. At the same time, the panels for the ground floor are better able to withstand mechanical stress, and if desired, the developer can completely decorate the façade of the building with just such a material. However, wall profiles have big sizes, rather than products for the ground floor.
What to do:
- Determine the amount of material for finishing the outside. To do this, you need to know the profile area and the area of the house facade minus windows and doors. You will have to take into account overlaps, cuts and add another 10% to the resulting amount; if the panel has a complex texture and configuration, then add the entire 15% to the resulting amount. The number of starting planks is also calculated; for this, the sum of the perimeter of the building is divided by 3 meters - the standard length of the plank.
- You will need external corners according to the height of the cladding, the number of which is also calculated by the sum of all angles and dividing the result by 0.45 m (height of the standard element) plus 5%.
- Will come in handy internal J-profile, the length of which is 3 meters. The quantity is calculated as needed, for example, if you plan to use profiles for finishing a doorway, then there will be more.
- It would also be a good idea to check fasteners and tools before starting work.
- The installation process begins from the corner, at a distance of 10 cm at the very bottom of the wall, a starting strip is attached, the horizontal and vertical level is measured, the mounting step of the strip is 30 cm.
- Facing the foundation involves first fastening the first outer corner, then checking the lower level for the evenness of the starting strip, and fastening it.
- The panel is inserted into the strip, pushed into the groove so that the gap from the outer corner is no more than 3 mm, the lock of the strip is latched, and the edge of the panel entering the groove is cut at a right angle.
Important! You should not veneer two corners at once; all work is carried out in stages. The panels can and should be cut, but the first and last profiles must be at least 30 cm wide, but the remaining trim is inserted just as the first or last panel.
- The last profile is attached to the left with one fastener, the right side is bent, the last element is mounted in the groove, both panels are bent and joined, secured.
- After the first row is completed, each subsequent row is performed by installing the upper profile into the lower one. And to connect with the previous one, it moves slightly to the left.
Important! In the place where it ends ground floor, a curb is mounted on the profile, only then attached to the wall panel. And the façade outer profile is inserted into the mounted border.
Don't forget about the additional facing decor. These could be visors, shutters, and other elements. Installation is carried out on top of the panels to the sheathing. The required number of holes is drilled, the diameter of which larger diameter fasteners, finishing is installed. After this, the work process can be considered complete.
As you can see, cladding a house with stone panels is much easier than laying a wall made of natural or artificial material. Among other things, you don’t have to resort to the help of professionals, lift weights and spend a lot of money. Well, the result will exceed any of your expectations - it turns out very beautiful stone house stable form, even if it is an old wooden mansion that has stood for decades.
When renovating a house, one of the important stages is finishing the walls on the outside. Quite common now modern materials that decorate the house. Moreover, they are not only decoration, but also serve as protection from various negative factors external environment. And almost all building materials for facade finishing the houses exhibit a thermal effect and have good sound insulation.
Wide choose
The construction market will offer a lot of options for cladding facades, and they will all differ in their properties and prices. For example, panels from natural materials will cost an order of magnitude higher than panels made from artificial materials.
Metal
Panels are made of aluminum or galvanized steel. The surface is also made either perforated or smooth. Metal panels have a protective coating. On 1 square meter the weight of the panels will be about 9 kg, that is, the load on the foundation should be taken into account. It is important to note that metal ones belong to.
One of the finishing options is sheet wall panels for the bathroom, a description of which can be found in this
Aluminum panels are considered the lightest. And the advantage steel panels lies in the fact that they react very well to strong temperature changes and can be used in extreme conditions for our altitudes. Advantages of metal panels:
- durable - service life is about 30 years;
- waterproof;
- can freeze and thaw about 50 times;
- fireproof;
- not affected by corrosion.
This finishing option as wall panels for decorating a corridor can be seen here
Find out more about wall panels under brick for exterior finishing can be found here in this
Sandwich samples
If you are faced with the task of not only decorating the walls of your house, but also insulating it, then you should take a closer look at sandwich panels. They contain several layers of insulation. It also contains a vapor barrier layer, plastic and metal. Panels of this type tolerate temperature changes well and have good sound insulation properties. To select a suitable sandwich panel you need to know. Panels are usually secured using self-tapping screws. But if the base of the wall is concrete, then you should turn to dowels. Advantages:
Disadvantages of panels:
- vulnerable during installation and further operation;
- Damage to the coating occurs due to careless handling;
- freezes at the joints if the temperature drops below -20 degrees.
You can find out what sizes of MDF panels for walls can be used in construction or renovation.
PVC
The second name, which is more widespread among the masses, is. It is often used when decorating the inside of a house.. This is justified by the fact that it is easy to use and easy to clean. Even with exterior decoration, it fully justifies itself. It is frost-resistant and does not deform at high and low temperatures. If you want to use regular PVC wall in exterior decoration, then ultimately this will lead to the fact that they simply will not withstand exposure to ultraviolet radiation. Therefore, they are now producing lining that is resistant to exposure to the sun. This is done by adding some components and coating with varnish. 
Ecopan
Ecopan - sip panels. Usually the building is constructed entirely from this material. They consist of particle boards, their thickness is no more than 10 mm. The composition includes polystyrene foam insulation. There are a lot positive aspects ecopana. First of all, this is the price. Houses are built from such panels in many countries. What other advantages does ecopan have?
Decorative
This type of panel is common and has a lot of finishing options. Separately, you can choose for interior decoration.
- Under the brick. By treating the walls with brick panels, you can look at your home in a new way. This kind of material speaks about your good taste. But you should know that such material will cost you quite a lot. The panels themselves are expensive, plus you need to use material for installation and the work of a craftsman. If you compare decorative stone and panels, then, of course, the panels will cost you much less. You can only find any differences if you get close to the house. From a distance, no one will notice that the walls are lined with panels. There are two types of panels: with a combined structure and homogeneous. The combined structure has a layer of insulation. Usually it is polystyrene foam. Facade panels are fastened using hot joints. In this case, it is more effective than glue. The advantage of panels over brick is that they can be laid in any weather conditions. And about how it happens interior decoration read our article.
- Under the stone. When using natural brick for decoration, know that you will need a good amount of money. Therefore, brick panels will be good option for replacement. Your home will look very expensive and beautiful. Their characteristics are similar to brick panels. Combined panels also have a layer of insulation, the second layer acts as decorative element. The panels can be laid using special glue or on metal cladding. In this case, metal profiles must be installed in advance. The price of the panels will depend on the thickness of the panels, color, and the material from which they were made. The weight of the panels is very small, and you can install them yourself.
- Clinker. The main component is clinker tiles. The tiles were originally made for laying sidewalk paths. But during the observation process, it was noticed that it is durable, withstands temperature changes well and retains heat. Soon they began to use it for finishing facades. Such panels are good at preventing the appearance of mold and mildew.
Base due to various colors and textures can be made very attractive and interesting. During installation, it is worth considering that you need to make additional thermal insulation and waterproofing. When laying panels, do it at a temperature not lower than 0. Only self-tapping screws or nails will help with installation.
Manufacturers
In the video - insulated facade panels for exterior finishing Houses:
When using facade panels you will give it a second life. It will become attractive and stand out from the crowd. You can choose panels that match the texture and color of your home. You can also choose the price that suits you.
Stone siding for plinth - modern finishing material, which is one of the most popular today. It allows you not only to insulate the building, but also to transform it appearance. This ensures reliable protection of the structure from the negative influence of the external environment.
Stone facing siding has a natural texture and is practically no different in appearance from natural material. And in some properties it even surpasses it.
Among the many advantages of stone-look basement siding, the following can be highlighted:
The finishing material is relatively light in weight, which greatly facilitates the installation process. Wild stone siding can be used for any type of foundation. This property becomes especially relevant if we're talking about about the reconstruction of old buildings.
Basement siding imitating wild stone is an environmentally friendly type of finishing. In the process of its production we use safe materials and special additives to improve quality characteristics products.
The material does not change its properties under conditions of sharp temperature fluctuations.
Basement stone siding reliably protects walls from moisture and prevents the formation of condensation. Thanks to this, mold or mildew does not appear on the surface of the material.
This coating does not require additional finishing and retains its excellent appearance throughout its entire service life.
The material has an improved system lock connections, which provide the panels with additional wear resistance.
Stone siding does not require special care. You can remove dirt using ordinary water And detergents that are at hand.
The catalog of the 101Siding online store presents more than 20 collections basement siding under the stone from the best manufacturers facade panels; Photos of the exterior decoration of houses and descriptions of materials can be found in the corresponding section. Our specialists will help you navigate the assortment.
To place an order you will only need a few minutes of free time. Select suitable type siding and place it in the “Basket”. We will deliver your order as quickly as possible.
Currently, siding for stone plinths is presented in a wide variety of collections. various shades and textures. This material can be of two types:
Metal siding. It is characterized by increased strength and wear resistance. One of the main advantages of metal siding is its high fire safety. That is why the material is widely used in the decoration of public and administrative institutions.
Stone-look vinyl siding. This material is made from polyvinyl chloride. Facade plastic panels under the stone do not crack, do not dry out and are not subject to rotting processes. The material perfectly withstands the effects of wind, snow, rain and other negative influences. external factors. Plastic stone siding does not require much maintenance. The product has a service life of at least twenty years. At the same time, stone wall siding has a fairly affordable cost.
Modern materials can imitate:
smooth stone;
- antique hand-molded stone;
- aged stone;
- antique stone;
- cobblestone and boulder masonry;
- “torn” stone;
- rubble stone;
- marble, granite, limestone and other rocks.
Photos of facade finishing options various types stone basement siding are presented on the Internet.
As noted above, stone-look facade panels have a relatively low weight and a well-thought-out fastening system. Thanks to this, they can be installed independently, without resorting to the services of specialized teams.
Installation of stone facing facade panels is carried out in several stages:
- First you need to arrange the sheathing. It can be made from metal profile and wooden blocks. When arranging the sheathing, it is necessary to take into account that the distance between the panels and the ground should be at least fifteen centimeters.
- After installing the profile, you should correctly cut the façade siding to look like stone. Some structural elements can be cut in a special way. For example, steps.
- The next step is installing the launch pad. Experts recommend starting installation from the left edge.
- Then the subsequent rows are laid. note that cladding panels under wild stone are installed as close to each other as possible. No gaps should be formed in this case. If façade panels “Wild Stone” are mounted on wooden sheathing, you can use nails to install them. If we are talking about steel elements, special screws are suitable.
Important: “Wild Stone” façade panels must be installed in such a way that thermal gaps remain. They must be present regardless of which sheathing the base material is laid on. If thermal gaps are not provided, over time the stone-look façade panels may become deformed and lose their presentable appearance (numerous photos of such examples can be found on the Internet).
If you want your home to look beautiful, solid and elegant, and at the same time for a long time did not require repairs, it is important to take care of good cladding of the building. At the same time, high-quality, durable and unusual finishing does not always require large labor costs and impressive cash injections. In particular, modern market offers such innovative products as façade panels imitating stone, brick or wood, which so reliably imitate these materials that they can only be distinguished from natural ones upon closer examination.
Also important is the fact that the panels can be installed with your own hands. Next, we’ll talk in detail about the types and features of basement siding, paying attention to Special attention"stone" options.
Let's look at the most popular options that help create an interesting visualization of masonry, incl. such textures as wild stone, rock, slate.
PVC or vinyl
They are based on various polymers, to which coloring, modifying and stabilizing substances are added, resulting in options of a wide variety of colors and textures.
Advantages of plastic panels:
- fireproof;
- water resistant;
- Fade resistant;
- have little weight;
- easy to install and maintain;
- inexpensive.
Weaknesses of the material:
- release toxic gases in case of fire;
- become brittle in the cold.
Vinyl siding prices
Vinyl siding
Fiber cement panels
They are made from sand and cement with the addition of cellulose and mineral fiber as follows: cement mortar is poured onto a reinforcing frame made of cellulose, synthetics or fiberglass, and the outside of the slab is coated with acrylic. Due to the high cement content, the panel is quite hard. Some manufacturers add mica and quartz sand, which increases the strength and durability of products. And in order for them to be resistant to ultraviolet radiation and precipitation, a varnish coating is applied to them. Also, the use of high-quality dyes and varnishes creates unique textures and colors of surfaces.
Video - Japanese fiber cement panels
Table 1. Main manufacturing companies of fiber cement panels.
| Company name | Peculiarities | Panel price/rub. |
|---|---|---|
| Kmew | A Japanese brand whose slabs are characterized by increased frost resistance due to the presence of special microgranules in the composition. | from 1500 |
| Zierer | The German company has been producing safe, durable panels for more than 30 years, which long years retain their original appearance. | from 1000 |
| Casa Verde | The Russian company has been producing panels and thermal panels since 2012, the warranty service life is 30 years, and the estimated service life is 100 years. | from 1000 |
| TechnoNIKOL Hauberk | The Russian manufacturer has been producing panels with an outer layer of natural basalt for more than two decades, which ensures long term services. | from 500 |
Reference! Fiber cement panel is produced by pressing, which is carried out under pressure 600-650 H/cm 2 , and autoclaving at a temperature 175 degrees C. After production, each copy is tested to ensure compliance with the declared characteristics.
Appearance of fiber cement panels
Advantages:
- strength is the main advantage, which corresponds to the quality of porcelain facade tiles;
- fire resistance;
- resistance to low temperatures and changes allows it to be used even in harsh climate conditions;
- equipped with ventilation slots, thereby allowing air to circulate freely between the panel and the heat-insulating layer;
- has a heat-insulating and sound-absorbing function;
- can be used both outside and inside the building;
- no preparation is required before finishing.
Flaws:
- not very presentable appearance, as a result of which the panels require painting after installation;
- high price.
Insulated panels
They are based on insulation, and the front side is a designer layer made of polymer coating, consisting of polyvinyl chloride, resin, foam and stone dust, which allows you to clearly highlight the stone texture, emphasize slate rock, rubble and wild stone.
Schematic composition of an insulated panel
Advantages:
- do not exert strong pressure on the foundation;
- the finishing process can be carried out in any climatic conditions;
- quick payback, due to the fact that a house covered with panels can be heated at half the cost;
- fireproof;
- do not allow mold and fungi to multiply;
- very durable.
Flaws:
- thorough surface preparation is required;
- high price.
Prices for thermal panels
Thermal panels
Stone or brick effect tiles, ceramic and clinker
This type includes thermal panels; they are a clinker facing material with polyurethane foam. Tiles are made from clay with mineral composition. Fireclay is added to clay for heat resistance.
Advantages:
- safe for the environment;
- moisture resistant;
- easily tolerates temperature changes;
- service life is several decades;
- great thermal insulation;
- not fussy to care for;
- easy to repair;
- due to its low weight, it does not put a load on the foundation;
- not afraid of exposure to ultraviolet rays.
Weak sides:
- high price;
- fragility of the decorative layer, and in some cases, the insulation.
Installation
Step-by-step instructions for finishing a house with fiber cement panels
We will need tools such as:
- Bulgarian;
- screwdriver;
- self-tapping screws;
- level.
Prices for angle grinders (grinders)
Angle grinders (grinders)
Panels come with an evenly cut edge, and there are panels with tongue-and-groove locks. Kits for facades are completed with the same elements as siding: corners, extensions, platbands, starting and finishing strips.
Important point! Some brands already have special ones for fastening panels clamps, while others will have to drill holes for roofing screws during installation.
Finishing frame house with vertical posts
- We lay insulation between the studs.
- We fix the base flashing element to protect our base. Almost every manufacturer offers this element complete with fiber cement panels.
- Then we install a hydro-wind protective membrane, making overlaps at the corners from 100 to 150 mm, we fasten them using a special stapler.
- We install clamps on the corners, on the tongues of which we fasten corner element. As for the internal corner, there is a special internal seal that is placed directly into the corner, sealing on both sides.
- Then we place the first panel and attach it to the posts using clamps. If there is no tongue-and-groove system between the corner element and the panel, a seam seal is installed. There is an insulator on the panels. When there is a connection between panels and panels, the panels will be waterproofed through this insulator.
- Then we strengthen the second panel. Again, if there is no tongue-and-groove system, the beginning of the panel is strengthened using clamps, which are attached at the beginning and end of each panel, as well as to vertical posts sheathings. A special seam seal is placed between each panel. If there is a tongue-and-groove system, then a clamp is installed on top in the center of the joint, which will hold two panels at once.
- As for the window opening, before installing the panel, a special strip is placed under the window, which is also necessary for air circulation. It should be the same in thickness as the clamps. We install a seam seal on the sides of the windows, and above the window - a seam seal and a ventilation strip, as well as under the window. A window sill seal with a tail is also attached to drain water if condensation gets in. The panel is installed.
- To finish the top of the wall, a vent strip is installed on top. The panel holder is placed on the ventilation strip and the finishing panels are installed.
Installation of panels on wooden sheathing.
Important! There must be a gap between the horizontal bar under the window and the vertical bar of at least 30 mm. This is done for better air movement.
- We install the basement drip.
- We install the sheathing. In the corners and at the joints of panels, the width of the strip should be about 90-100 mm, and the thickness is 25-40 mm. Intermediate strips: 45- 55 mm width and thickness are the same as the corner strips.
- The window opening is also covered with slats. There is a nuance here: first, the bottom bar is attached flush with window opening, and then planks are attached to the left and right sides and the last plank covers the top.
- After installing the sheathing, a starting plate is attached around the perimeter. The initial panel will be attached to it.
- Then a corner element with a clamp is attached, which is used here in a different shape and with two antennae.
- We also fasten the corner panels on top with conventional clamps, and install seam seals to the slats to connect the joints between the panels.
- Then the same procedure occurs as described above, using clamps and suture seals. On internal corners a seal is also installed, one panel is installed, strengthened with a clamp, then a seam seal is placed in another plane and a panel is installed, which is also strengthened with a clamp.
- Treatment window openings practically no different from the technology described above. We place a seal with a tail over the window to drain water if condensation accumulates. On standard window three pieces are placed. A ventilation strip is placed on top according to the thickness of the clamp, the remaining steps are the same.
Advice! In order to save on these elements, you can get out of the situation as follows: take a panel of one color at the corners, and use another color along the perimeter. The only thing is that you have to saw the panels on one side at an angle 45 degrees so that the joint at the corner is tight.
Step-by-step instructions for finishing facade panels with insulation
Let's consider the option when installation takes place on bare wall without sheathing and hydro-wind protective membrane.
To work you will need tools such as:
- hammer;
- rubber mallet;
- grinder for filing panels;
- perforator;
- dowels;
- pliers.
Prices for popular hammer drill models
Hammers
Work order:
- Installation occurs by fastening the slabs to special tendrils, for fastening which a hole is drilled in the wall with a hammer drill, and the tendril is attached to a dowel. The tendril is attached to one hole, the edge of the tendril remains unattached to connect to the next row of panels.
- The rows are attached to each other by the same tendrils: some tendrils extend behind the insulation of the other panel and hold the edge. The edges are tapped with a rubber mallet for leveling.
- To prevent heat loss, a special foam adhesive is applied to the insulation, which, during the expansion process, fills all the cracks between the tiles.
- The angle is made like this: the edge of the tile should protrude, the size of the protrusion is equal to the thickness of the tile. The insulation is removed from the edge, which makes the joint with the other tile.
- The window opening also does not cause difficulties: the tiles are sawn down according to window opening. If window hole goes deep, then sawn tiles are inserted into the recesses, which are attached to metal strips with a self-tapping screw. Above the window, two metal strips are attached with dowels, and a tile is attached to them, in which a hole is drilled for this purpose, a dowel is inserted there, and everything is also attached with a self-tapping screw, which is then painted over.
Advice! For beauty, you can use the following finishing process: use tiles of a different color in the corners and along the edges.
Step-by-step instructions for finishing clinker tiles to look like stone
Prices for Ceresit glue
Ceresit glue
To work you will need:
- special glue;
- tile cutter;
- putty knife;
- a thread;
- brush.
Important! You need to start work with window and door openings.
Step 1. Treat the surface with glue.
Step 2. Moisten the tile with water, apply glue, make grooves.
Step 3. After laying the first row, stretch a thread along the wall, which will serve as a beacon for laying other rows.
Prices for popular models of laser levels
Laser level
Step 4. When gluing tiles, you must remember to leave the seams identical in size to the thickness of the tiles.
Step 5. Fill all seams with mortar and rub. Result
Houses covered with stone-like facade panels look not just elegant, but completely correspond to your ideas about the appearance of the building - it can be aged, conveying the style of your favorite era, or ultra-modern. Moreover, such cladding has a long service life, which will provide an attractive appearance for many years. If you want to update the design of the facade, then dismantling and new installation It happens very easily and can be implemented on your own. Another important factor is the absence of the need for maintenance of the panels - only occasionally they can be rinsed with water to remove dust.
Houses with façade panels made to look like wild stone look especially exclusive. In this case, their solidity and importance border on inaccessibility. At the same time, their owners all year round they live in comfortable conditions, because, like natural stone, these panels keep the indoors cool in the summer and protect them from biting winds and severe frosts in the winter.
Reference. Over the past decades, Russian products have also become competitive. Particularly noteworthy are companies Alta siding, the panels of which can withstand frosts down to -50 degrees Celsius and heat – up to +60°С, price 1 piece. from 124 RUR, And Nordside, which does not use harmful or toxic substances in production and guarantees 50 year service life, panel price from 105 rub..
Table 3. Leading manufacturers of stone or brick tiles.
| Brand name | Peculiarities | Panel price/rub. |
|---|---|---|
| Nailite | The US brand produces tiles in 10 unique series, each of which can withstand a temperature range from -50 to +50 degrees C. The warranty period is 25 years. | from 890 |
| Dock-R | The German quality of the panels ensures their long service life, confirmed by a 50-year guarantee. | from 350 |
| Grand Line | The Russian manufacturer produces premium tiles, which are guaranteed for life. | from 260 |
And in conclusion, I would like to wish that no matter what type, design and texture the walls of your home are, the main thing is that an atmosphere of love and mutual understanding always reigns inside, filling the hearts and souls of household members with warmth, comfort, and light.
It will also be useful for you to learn about on our website.
Plastic facade panels are most often used for exterior finishing of facades. Sometimes they are called. This material has great strength and is quite easy to install. It is recommended to install it with insulation: this will allow the house to retain heat inside for as long as possible.
Installation Features
Most often, conventional ones are used for installing vinyl siding. wooden slats. Sometimes they are replaced with a special metal CD profile. The same profile is used for installing drywall indoors. Considering that the panels will be mounted outdoors, it is better to use hardware, since wood tends to absorb moisture, which significantly reduces its service life.
You should choose a CD profile with a cellular frame: this will make it easier. The profile should be placed vertically; Each strip is mounted at a distance of 35 cm from the adjacent part. Only the top and bottom strips are installed horizontally.
In order to install the profile, metal hangers are often used. They are bent in a U shape and attached to the wall using screws or dowels. The distance between the dowels should not be more than 50 cm. It is optimal to place them at a distance of 40 cm from each other.
The panels will be located at a short distance from the main wall, creating decorative surface. These voids can be used by placing insulation in them. Often used as insulation mineral wool or polystyrene foam. When installing siding with imitation stone, it is important to ensure that there are no gaps or cracks.
Often the siding does not fit ideally in height, and the last row has to be shortened yourself; but there will be no mounting holes on the panel. The sheet should be fastened in such a way that the screws pass along decorative seam. Three fixation points are enough for one sheet.
To decorate the facade with a stone look, it is best to use façade panels, since they are specially designed for this purpose. The price of the material is much lower than natural stone, but, unlike the latter, the siding always looks perfect and is easy to install.
In addition to ease of installation, siding has the following advantages:
- It is easy to clean and does not require any additional maintenance.
- Using siding will allow you to insulate the wall and hide the insulation without additional costs.
- The material does not allow moisture to pass through and will protect the walls from it.
No required cement mortars, which are quite expensive. - The material itself is much cheaper than natural stone and has a form convenient for installation.
Install vinyl siding It’s quite possible to do it on your own. This will require a little time, a minimal set of tools and a little patience. Even an amateur can handle the installation.