Let's start with this first level, here you will find the answers to Find words War answers this game was developed by YouOn, famous in trivia games for android devices.

Find words Tools answers

From now on you will have all the walkthrough and necessary answers to complete this Find the words puzzle.

We present to your attention our new word game“Find the Words”, which is based on the concept of a Hungarian crossword puzzle.
In this game you need to look for words in a large square and highlight them. As you yourself understand, everything is very simple, but with each level the difficulty will become higher and higher - the game will not let you get bored.

Do you want to solve a Hungarian crossword puzzle? Do you want to try to find words in a square of letters? Here you go!

You should try this! And that's why:
– A large number of levels to the most different topics
– More than 30 categories, more than 700 levels, more than 4000 words
– Nice interface
– Ability to use hints

PS: If you are looking for answers to other levels, you will find them below:

Find the words answers

Level 1 SCREW, BRICK, PLIERS, CLAMP, PLIERS

Level 2 TESTER, MICROMETER, PIC, INDUCING TAPE, CONCRETE, COMPRESSOR, SIDE CUTTER

Level 3 CLEAVE, ZENZUBEL, SCISSORS, PENCIL, RANGE FINDER, PUNCH, HAMMER

Level 4 CUTTER, JIGSAW, CHUCK, HAIRDRYER, MARKER, PLIERS, MIXER, TAP

Level 5 CALIPER, MILLER, MACHINE, SOLUTION, SCREW, VICE, PLANE

Level 6 MITERBOARD, RIVET, DREMEL, DRILL, SOLDERING IRON, BURNER, ROULETTE

Level 7 PAINT, GLOVES, WIRE, CUTTER, MAgnifying Glass, SPRAY GUN, KNIFE, WELDING

Level 8 PICK, CLIP, SPATULA, Plumb, DIE, CROWBAR, TZINUBEL, TROLLER

Level 9 SCREWDRIVER, SCRAPER, FILE, LEVEL, STADDER, BOLT, SMALL

Level 10 KEY, BITT, HYDRAULIC LEVEL, GLASS, CHISEL, SLEDGE HAMMER, PERFORATOR

Level 11 PINCERS, PUNCH, RULE, WASHER, CROWN, TROEL, WIRE

Level 12 WORKBENCH, TILE, CIRCULAR, GRATER, ROLLER, RAKE, NAIL

Level 13 TILE CUTTER, NAIL PULLER, WINCH, FORK, RASP, COUNTERSINKER, STICHEL

Level 14 HAMMER, GLASS CUTTER, DRILL, RULER, DOUBLE, REAMER, CHISEL

Level 15 NEEDLE FILE, NUT, HACKSAW, AWL, HOLE PUNCH, BOLT CUTTER, FALZGEBEL

Level 16 HEXAGON, ROUND-NOSE PLIERS, Wrench, ROLLER, STAPLER, TONGS

Level 17 AX, SAW, BLADE, BRUSH, SAND, WASH, BREAKERS, SHOVEL, JACK

Level 18 MALLET, EMITHER, JOINTER, SQUARE, CUTTER, CHISEL, RAMMER

After completing these levels you can go to the next page to get full list required answers:

If you have any suggestions, feel free to comment on this thread.

For example, by repeatedly squeezing a ball, a person remembers more slowly Name tool or the device presented to him in the photograph, especially in cases where the handle tool in the photograph it is located close to the hand of the person looking at the photo. ..., among other things, is intended to give each object (in this case, a device or instrument) certain Name. In parallel with this, other parts of the brain are also connected to the process. They are aimed at regulating and coordinating...

https://www.site/journal/131160

Letters- these are the properties that our desire takes on under the influence of light, returning to the source. The Creator created the material – our desire to enjoy. It's... shapes. What does "form" mean? – A material that has become similar to light in some way is called a form of matter. There are only 27 such forms: 22 are letters from "alef" to "tav", and five more final letters– mantsepah. Why? Because from ZAT de Bina, the part of Bina that affects us, 22 forms of bestowal emanate: 9 from Bina, 9 from ZA and 4 from Malchut. And further...

https://www.site/religion/17238

The third sign is used very cleverly on Smolenskaya Square in Moscow. Entrance to a company store with a pretentious name“Furniture” is designed in the form of a huge letters e. From the textbook by A. A. Reformatsky we learn additional information. " Letters e - e, a - ya, o - e, u - yu, s - and indicate five vowel phonemes, with a double set letters (10 letters for five phonemes) is explained... by the graphic technique of designating hard and soft syllables, since...

https://www.site/journal/114470

... "vile rabble", while the "church" "fucking" reprimand was considered more cultured, noble and intelligent. Letter“е” disappeared from the spelling of many surnames: the philosopher and writer Montesquieu (French: Montesquieu) [physicist Roentgen (German: WilhelmConradR... contributed to the strengthening of “е” in the press. During the war, many operations were disrupted due to confusion in names settlements, which differed only in one letter. For example, Berezino and Berezino, Chigarevo and Chigarevo. They say even in the order that...

https://www.site/journal/147066

You are for the creation of the world, for in you a clue is formed for the Klipot." Question: If letters My name is on the clip, should I change my name? Answer: Here we're talking about not about someone's name, but about names spiritual actions, Partzufim. " Letters" - these are properties awakened in vessels by light. We do not talk about it itself, it is incomprehensible to our...

Texture

The nature of the surface treatment: its roughness, smoothness, rustication, etc.

fold

Type of seam when joining sheets metal roofing. The most airtight and moisture-proof is the double standing seam. This longitudinal connection, protruding above the roof plane between two adjacent roofing panels, the edges of which have a double bend.

Seam roofing

Roofing made of sheet and rolled galvanized steel, as well as steel with polymer coating, in which the connection individual elements coverings are made using folds.

Raised floor

prefabricated floors of industrial buildings with ventilated underground. Electrical and other communications are laid in the false field.

Plywood

Laminate wood material, glued together from an odd (three or more) number of sheets of peeled veneer. The veneer fibers of adjacent plywood layers are oriented mutually perpendicular. It is divided into general and special purpose plywood.

Porcelain

Fine ceramics products white with a firing temperature of 1250–1450 degrees. C. They have low water absorption (up to 1%) and fairly high hardness (6.57–7.5 on the Mohs scale). They are divided into products made of hard and soft porcelain, which is determined by the firing temperature. Exist technical varieties porcelain, which have a number of specific qualities.

Facade

Front side of the building. There are facades: main, side, rear, street, courtyard, garden.

Ventilated facade

Currently, the design of ventilated facades using panels and additional insulation is becoming increasingly widespread. This ventilated façade combines quick installation, high quality thermal protection, durability, and attractive appearance.

Half-timbered

A frame system consisting of interconnected posts, beams and braces. The half-timbered structure plays not only a constructive, but also a decorative role, visually dividing the façade.

Faience

Fine ceramic products coated with transparent or dull glaze. Water absorption is 9–12%. Unlike porcelain, they contain more clay, as well as chalk or limestone. Used for the manufacture of tiles and sanitary products.

Phenol

Carbolic acid. C6H5OH. Raw materials for the production of polymers, dyes, drugs, surfactants. Colorless crystals that turn pink in air.

Rafter truss

Lattice Basic structure, used to cover large spans.

Fiber

Material in the form of fibers or narrow strips used for dispersed reinforcement concrete structures. This increases the resistance to stretching, abrasion, and impact loads. Fiber can be steel, glass, basalt, polymer.

Fiber concrete

A structural material made from fine-grained concrete reinforced with finely dispersed synthetic or glass fiber, as well as metal mesh fiber.

Fibrolite

A slab material usually made from special wood shavings (wood wool) and an inorganic binder. Wood wool is obtained in the form of thin and narrow shavings up to 30 cm long on special machines. Portland cement is used as a binder in fiberboard, less often magnesia binder. Thermal insulating fiberboard has average density 300-500 kg/m3.

fold
Seam is a type of seam when joining sheets of metal roofing. The most airtight and moisture-proof is the double standing seam. This is a longitudinal connection protruding above the roof plane between two adjacent roofing panels, the edges of which have a double bend.

Seam roofing
The roof is made of sheet and rolled galvanized steel, as well as polymer-coated steel, in which the connection of individual coating elements is made using folds.

Raised floor
Raised floors are prefabricated floors of industrial buildings with a ventilated underground. Electrical and other communications are laid in the false field.

Plywood
Plywood is a layered wood material glued together from an odd (three or more) number of sheets of rotary-cut veneer. The veneer fibers of adjacent plywood layers are oriented mutually perpendicular. It is divided into general and special purpose plywood.

Porcelain
Products of fine ceramics are white in color with a firing temperature of 1250–1450 degrees. C. They have low water absorption (up to 1%) and fairly high hardness (6.57–7.5 on the Mohs scale). They are divided into products made of hard and soft porcelain, which is determined by the firing temperature. There are technical varieties of porcelain that have a number of specific qualities.

Facade
Facade - the front side of a building. There are facades: main, side, rear, street, courtyard, garden.

Ventilated facade
Ventilated facade - currently, the design of a ventilated facade using panels and additional insulation is becoming increasingly widespread. This ventilated façade combines quick installation, high quality thermal protection, durability, and attractive appearance.

Shaped hole
A hole whose shape is other than round.

Half-timbered
Half-timbered — frame system, consisting of interconnected racks, beams and braces. The half-timbered structure plays not only a constructive, but also a decorative role, visually dividing the façade.

Faience
Fine ceramic products coated with transparent or dull glaze. Water absorption is 9–12%. Unlike porcelain, they contain more clay, as well as chalk or limestone. Used for the manufacture of tiles and sanitary products.

Rafter truss
Rafter truss is a lattice supporting structure used to cover large spans.

Fechral
General name for heat-resistant iron-based alloys containing chromium (Cr) and aluminum (Al), combining heat resistance with high specific electrical resistance. Fechral is produced mainly in the form of wire and tape. It is used as a substitute for nichrome for the manufacture of resistance elements operating with heating not exceeding 1000 degrees. C.

Fiber
Fiber is a material in the form of fibers or narrow strips used for dispersed reinforcement of concrete structures. This increases the resistance to stretching, abrasion, and impact loads. Fiber can be steel, glass, basalt, polymer.

Fiber concrete
Fiber-reinforced concrete is a structural material produced from fine-grained concrete reinforced with finely dispersed synthetic or glass fiber, as well as metal mesh fiber.

Fibrolite
Fibrolite – slab material, usually made from special wood shavings (wood wool) and an inorganic binder. Wood wool is obtained in the form of thin and narrow shavings up to 30 cm long on special machines. Portland cement is used as a binder in fiberboard, less often magnesia binder. Thermal insulating fiberboard has an average density of 300-500 kg/m3.

Acoustic fiberboard
Acoustic fiberboard is a material made from wood wool or synthetic fiber and a mineral binder (Portland cement or gypsum). The sound absorption coefficient of acoustic fiberboard is at least 0.4.

Magnesia fiberboard
Magnesia fiberboard is a fiberboard made without special mineralization, since caustic magnesite is mixed with aqueous solutions of magnesium salts, which bind water-soluble substances contained in wood.

Fiber cement
A material consisting of cement (80-90%), reinforcing fibers and mineral fillers. Used for making wall panels, partitions and facing slabs (sheets). Initially (at the very beginning of the 20th century) asbestos was used as a fiber; today it is synthetic and glass fibers.

Panel
Panel - sections of the wall highlighted with thin profiled frames. Also, a panel is a shield made of thin boards, plywood or plastic that covers the gap in the frame of the door leaf.

Fitting
Fitting is a connecting part of a pipeline, installed in places of its branches, turns and transitions to another diameter.

Flange
Flange - a metal flat disk at the ends of pipes, used to fasten them together using bolts or rivets.

Flop
A flap disc is a grinding device that is an abrasive material in the form of leaves attached to a fiberglass-reinforced circle. Flip discs have a number of advantages over fiber discs, especially when polishing thin metal sheets. They do not require the use of a rigid backing and can be placed directly on the machine; do not leave carbon deposits, operate without noise and vibration; have greater performance and wear resistance. Flip discs come in two types: straight (provide high results when processing smooth surfaces) and conical (when performing grinding operations they easily achieve the highest results). hard to reach places treated surface).

Outbuilding
A side (or free-standing) extension to the main building.

Wind vane
A device designed to measure wind direction, in the form of one or two angled plates, when rotated around vertical axis mounted with a counterweight towards the wind.

Vane
A device for determining the direction and speed of wind in the form of a metal flag that rotates under the influence of the wind and is mounted on a vertical axis. The counterweight of the flag is directed in the direction from which the wind is blowing. The strength of the wind is determined by the angle of deviation from the vertical of a freely swinging metal plate mounted on the weather vane perpendicular to the direction of the wind.

Fluorite
Another name is fluorspar, a fluoride class mineral; formula chemical composition CaF2. Hardness on the mineralogical scale is 4, density is 3180–3200 kg/m3, melting point is 1360 degrees. C. Various colors: yellow, green, purple, etc. Used in metallurgy as a flux; V chemical industry– for the production of hydrofluoric acid, as well as – enamels and glazes for ceramic production. Widely used in optics for making lenses, lenses, etc.

Folgoizol
A rolled material consisting of thin corrugated aluminum foil, coated on the underside with a layer of bitumen-rubber or bitumen-polymer binder, consisting of bitumen and rubber or rubber with a mineral filler and an antiseptic.

Building lantern
Convex ( various shapes) part of the covering of a structure that has openings for lighting and ventilation.

Nozzle
A nozzle is a device for spraying liquids. The fluid is supplied under pressure or using compressed air.

Phosphogypsum
Phosphogypsum is a by-product industrial production, mainly containing gypsum dihydrate. Phosphogypsum is a valuable raw material for the production of construction gypsum.

Transom
Transom - the upper glazed part of the window frame. Sometimes the transom is installed above the door leaves.

Milling cutter
Multi-tooth tool in the form of a body of rotation for machining various materials(metals, wood, plastics) by cutting (milling). There are cylindrical, end, disc groove, cut-off, end, key, corner, shaped, worm and other cutters. In addition, cutters are distinguished by the shape of their teeth; in the direction of helical grooves (with right and left grooves); by design (solid, composite, prefabricated, etc.): by method of fastening; according to the material of the cutting part.

End mill
A cutter designed for simultaneous processing of two mutually perpendicular surfaces.

End mill
A cutter designed for processing flat surfaces, the axis of which is perpendicular to the surface being processed. It can be assembled with hard alloy plates and with insert knives. The cutting part of each knife has cutting edges, the location of which is determined by the projection onto the axial plane passing through the top of the cutter tooth.

Shaped cutter
A milling cutter designed for processing surfaces that follow its own shape.

Cylindrical cutter
A cutter designed for processing flat surfaces whose axis is parallel to the surface being processed. A cylindrical cutter has teeth only on the cylindrical part.

Hob cutter
A cutter designed for cutting sprocket teeth for single and multi-row drive roller and bushing chains and for the production of cylindrical gears.

Key cutter
A cutter used for processing keyways.

Fresco
Fresco is painting with water paints on freshly applied, damp plaster.

Gable
Bounded on the sides by roof slopes and below by a cornice, the completion of a building façade, portico, colonnade, usually triangular in shape.

Jointer
Manual carpentry tool, intended for final finishing planing; leveling large surfaces; jointing (fitting) individual parts. Structurally, it is designed like a long plane with a double knife.

Foundation
Mainly the underground part of the structure, which serves as its support and transfers the load to the base.

Lining
Protective internal lining. The term is used in relation to thermal units, chemical apparatus, and crushing equipment. The lining is made of a material that is more resistant to the influence of the corresponding factor (can be fire-resistant, acid-resistant, heat-insulating, protecting from mechanical influences). Sometimes lining is called the outer protective lining of the elements of units.