Ariston wall-mounted gas double-circuit boilers are an excellent choice for both space heating and water heating. Ariston boilers: reviews, models, instructions, possible malfunctions Operating instructions for a wall-mounted gas boiler Ariston

Italian manufacturers have been producing Ariston brand boilers for quite some time. Boilers became popular in our country during the period of intensive individual construction of buildings, in houses where work central system heating leaves much to be desired.

Ariston succeeded with its technical abilities, was loved by the people due to the variety of configurations, a wide range of systems, and is still in demand among consumers.

The lineup

The line of models of double-circuit boilers, in contrast to single-circuit boilers, is more in demand, since the models are designed for heating premises and supplying hot water.

BCS 24 FF (closed combustion chamber) and Uno 24 FF (open combustion chamber)

Most buyers choose Ariston of these brands. In addition to the operating instructions, the device comes with all the elements of the heating system, which you can operate every day and without special skills.

Efficiency reaches 95%, power – 24 – 26 kW, productivity hot water– up to 14 liters per minute.

Genus

It is considered the most functional model. There is a display on the case that shows all the parameters of the device both inside and outside. Ariston of this brand is compact, equipped with a modulated burner, which helps to use fuel economically, and also has a programmer with a built-in timer.

You can set a program for the device immediately for the whole day, lower or increase the temperature, set the parameters of the unit at your discretion. The tank volume is 8 liters, the air vent is automatic, a self-diagnosis system is built-in, all information is reflected on the display.

Egis Plus

Adapted for operation in Russian climate conditions. The models are not afraid of voltage drops in gas pressure in pipes. The unit has 2 heat exchangers: copper and stainless steel, as well as a condensate collector for uninterrupted operation at outside temperature below - 52 degrees. The panel has LED indexing.

All information can be read on the display.

Advantages and disadvantages

Like any system, Aristons are not perfect.

Its undoubted advantages are:

Safety. The system is safe, even though the fuel is explosive.
Efficiency is high, when burned, the gas leaves virtually no residue, the heating is completely spent on the needs of the owners, and the heat is retained in the room.

The disadvantages include:

You shouldn't choose a cat l for room heating purposes
For boiler installation a separate, and not small, room is required, since next to it you still need to place fire protection system, in case of fire
The pressure in gas boilers is not stable, sharp jumps are possible, which is also explosive. Required additional installation control unit, burners, the device can quickly fail.

Technical characteristics and selection criteria

When choosing, it is important to pay attention to the following characteristics:

Boiler power, which consists in calculating heat. Without certain knowledge, it is extremely difficult to do this on your own. The calculation takes into account the area of the openings of all windows in the home, the percentage of heat transfer from radiators, and the thermal permeability of walls. Only taking into account these parameters will the choice be optimal, and you will not have to overpay for excess electricity. The average energy consumption factor is 100 W per 1 meter of housing. When combining a heated room with an unheated one, the indicator will increase by half, to 160 V.
Availability of a flue to remove gas.
The presence of a circular pump in Ariston. Without it, you cannot leave the device unattended in winter, the pipes may burst. The control system should be simple and understandable to the average user. You are unlikely to need a device packed with various functions to heat water, and the cost of such multifunctional units increases significantly. Today they are not in demand.
Heat exchanger material. It is better if it is steel, cast iron, or copper. It is advantageous to have a copper unit; it has high efficiency; all the resulting temperature is transferred to the carriers. However, copper is not durable. Performance and durability are higher for cast iron boilers; the alloy is reliable and durable.
The performance of the boiler depends on the water consumption for the needs of the family. The boiler is not suitable for heating large areas, but it can handle heating water quite well. It is not difficult to calculate water consumption, knowing that 5–6 liters of water flow out of the boiler per minute. During the same time, up to 12 liters are poured out of the shower. It is necessary to count the number of points connected to the boiler and make a total calculation.

Manufacturers indicate the difference in the documentation for the boiler temperature regime before heating, compared with the temperature after heating. When choosing a model, in addition to water consumption, consider the water temperature before starting to heat the boiler.

If up to 5 liters of water per minute flows from the tap, the temperature of the water before heating should be at least 7-8 degrees. If there are 3 points in an apartment you need 5+5+5=15 liters. When the boiler is heated to 40 degrees, minus 7 degrees before heating, the result will be 33 degrees, which is quite acceptable both for washing kitchen utensils and for taking a shower.

The advantage of modern units is given to floor-standing boilers. The operation of these Aristons is not affected by the quality of the power supply; models with a cast iron heat exchanger are more reliable and durable.

Price and reviews

You can buy a new Ariston for 20-25 thousand rubles. Foreign analogues, new products with many functions and built-in LCD displays are more expensive, but they are also of better quality. Although our domestic producers no worse. It’s better to overpay, but buy a reliable, trouble-free item, taking into account all the described parameters.

It is impossible to name at least one property owner who would not dream of cozy home. In order to keep the rooms warm, today there is no need to install stoves that consume great amount firewood and coal. Such equipment is a thing of the past. They are replacing him heating devices, which are accessible to almost all segments of the population.

Solution of the problem

These technical innovations are distinguished by their compact size and high efficiency. The advantages are complemented by the absence of the need for constant human presence and ease of operation. Almost all processes of such devices can be automated. Therefore, when designing a home and reconstructing an existing house, experts recommend paying attention to Special attention to the heating system.

It is most often based on heating boilers, the correct selection and proper installation of which will determine the heating efficiency. Among other things, it is important to study the issues of minimizing heat loss and efficiency. On the market today, among others, are Ariston boilers, reviews of which you can read below.

Review of the most popular models: EGIS PLUS 24 CF

This equipment costs consumers 48,300 rubles. This boiler is a unit that is equipped with an open combustion chamber. "Ariston 24" is a design that has a burner made of of stainless steel, protected from frequent switching on. This device belongs to the X4D enclosure protection class.

On external panel There is a display that allows you to simplify control and change operating parameters. This Ariston boiler, which has only the most positive reviews, has the option of frost protection and blocking of the circulation pump. You don't have to worry about scale forming inside. The Ariston double-circuit boiler can be used to equip a heating system and supply hot water.

Reviews about the model

According to buyers, the boiler has many advantages, among them the following should be highlighted:

simple controls;
efficiency;
easy installation;
adaptability to Russian conditions;
presence of a built-in condensate collector.

Ariston 24 is economical, which attracts consumers. He has low level fuel consumption. Installing it is quite simple. This is facilitated by the compact dimensions of the case. The equipment can be placed on the wall in a limited space. According to buyers, the unit can operate at reduced gas pressure. Operation of the device is possible even at low external temperatures down to -52 °C. Buyers like that the boiler has a self-diagnosis function. The design is equipped with a stainless steel heat exchanger.

Review of the Genus Premium 45 HP boiler

If you are interested in Ariston boilers, we recommend reading reviews about them. You can purchase the equipment for RUB 144,200. This wall-mounted model is used for heating houses and premises. Equipment supplied closed camera combustion. The spiral heat exchanger is made of stainless steel.

The external panel of the Ariston wall-mounted boiler has a display that simplifies operation and control. Efficiency is increased through the use of condensing technology. Energy costs are reduced, especially when compared with traditional boilers.

Reviews about the model

Quite often lately consumers have been interested in Ariston boilers; you can read reviews about them in the article; perhaps they will allow you to make right choice. As for the above-described equipment model, it, according to buyers, has outstanding features, among which the following should be highlighted:

simple controls;
safety;
ease of use;
comfort;
silent operation.

During operation, a minimal amount of harmful impurities is released into the atmosphere. This indicates safety. Many consumers, in their words, pay attention to ease of use when purchasing such equipment. In this case, the operating time and heating temperature in heating mode can be set according to the user's needs.

The unit is silent. It saves fuel up to 35%. With reduced gas pressure, the equipment will be able to maintain stable work. The body has compact dimensions, so the boiler can be installed even in small spaces. Consumers also like the fact that they have the opportunity to additionally connect storage boiler for hot water.

Model operating instructions

You can also choose an Ariston boiler as a heating equipment; the operating instructions are included in the kit and must be studied by you before you start using the equipment. In it, the manufacturer discloses safety issues. For example, it is important to prevent leakage of liquid gas, as this can pose a danger to human life. If this does happen, then the heating system must be turned off. The premises should be checked by closing all doors that lead into living rooms. Electrical switches however, it is prohibited to use it.

If you smell gas, a leak could cause an explosion. Smoking is prohibited under such conditions. It is important to eliminate the possibility of sparks and open fire. You must immediately open the windows and turn off the gas supply. The heating system must be turned off. IN danger zone people should not be allowed.

The Ariston boiler, the operating instructions of which you must read if you purchased similar equipment, is installed taking into account the manufacturer's recommendations. After reading them, you can find out that the device is mounted on a vertical flat surface. For ease of maintenance, minimum clearances should be ensured. No special ventilation is required in the room where the device is installed.

When connecting gas, make sure that the connections are tight. Electrical wiring should be connected in such a way as to facilitate electrical isolation of the equipment. Before applying water, flush the system without disconnecting the device. In order to remove contaminants and prevent damage to the heat exchanger, you should make sure that there are no contaminants, as they can cause build-up and corrosion.

Possible faults

Using the error code of Ariston boilers, you can find out about malfunctions. Overheating will be indicated by “1 01” on the display. The sensor will trigger if the temperature is 102 °C. As soon as cooling occurs, the error will be reset. A similar problem can be caused by insufficient coolant flow, as a result of which the heating circuit filter becomes clogged.

Sometimes there are problems with circulation pump. This error can be caused by an excessively large flame on the burner. Sometimes a method that requires overlap helps gas tap. Having familiarized yourself with the errors of Ariston boilers, you will be able to understand what went wrong during the work process. For example, code “1 02” indicates that the pressure sensor in the circuit is faulty. Low pressure can lead to such an error. It will not be possible to reset it; you will need to eliminate the cause.

Insufficient circulation is indicated by codes “1 03” to “1 07”. Sometimes this is caused by insufficient coolant volume. In order to troubleshoot the Ariston boiler, you need to remove the air by pressing the ESC button for a few seconds. The pump will operate without igniting the flame. Next, check the pressure and add if necessary.

If problems arise with the circulation pump, the control relay may be the cause. When equipment encounters slagging in the heat exchanger, it can prevent good circulation. This is sometimes also caused by a clogged filter installed in the heating circuit.

Conclusion

The Ariston double-circuit boiler, one of which was discussed above, will allow you not only to install a heating system, but also to use hot water. Modern equipment is equipped with many functions that will make living in the house comfortable. You can also choose boilers from the manufacturer Ariston. They are offered for sale in a wide range.

Ariston's product range today includes 3 models of double-circuit gas boilers to provide residential buildings with heating and hot water supply. For areas of less than 200 m2, the BS II model is offered, and for areas of 200-350 m2 BS II, EGIS PLUS and CLAS B.

The advantage of the devices is the cost of heat production compared to all other types of boilers. The disadvantage is the need for a central gas supply system and a constant supply of electricity.

Gas boilers are suitable for heating and hot water supply residential apartments And country houses, being a cheaper alternative to central heating.

General characteristics of boilers

Familiarity with the characteristics is necessary to correctly select the device model:

Execution – floor or mounted. The mounted version has more compact dimensions, but also less generated thermal power. Differences in functionality between modern models No.
Combustion chamber type. The open chamber takes air from the room and exhausts flue gases through the chimney. A closed chamber can intake air and exhaust exhaust gases through one coaxial pipe. For installation in an apartment, a closed combustion chamber is preferable.
Thermal power of each circuit in kW. The area of the heated room depends on the parameter. Approximate calculation: 1 kW per 10 m2 of room.
Efficiency factor (efficiency). Characterizes the efficiency of the device in transferring energy obtained by burning gas. The higher the efficiency, the less fuel is required to heat water.
Coolant temperature in °C and its regulation range. It is necessary to select a device that provides the desired temperature.
Circuit capacity in liters per hour. When assessing this parameter, it is necessary to take into account the average water consumption for hot water supply; it may be advisable to use a storage structure with an installed one.
Availability of protection and comfortable control functions, a wide selection of operating modes.

Line of models

B.S. II – wall-mounted gas boiler for heating and hot water supply in apartment buildings. The boiler has a compact design, low weight and two reliable separate heat exchangers:

	BS II 15 FF		BS II 24 FF		BS II 24 CF
The combustion chamber	closed				open
	11-15		11-25,8		11,2-25,8
	11-28		11-27		11-27
	89,6		93,8		91,9
	89,3		93,6		91,2
	35-85
DHW circuit temperature, °C	36-60
	13,6
	9,7
Weight, kg	30
Price, rub	36 500	42 000		39 000

Model CLASB It has wall version and a built-in 40 liter stainless steel boiler. The device is designed for high water consumption in the DHW circuit, combining the functions of a storage and instantaneous water heater.

The model is equipped with a digital display for comfortable control:

	CLAS B 24 CF	CLAS B 24FF	CLAS B 30FF
The combustion chamber	open	closed
Thermal power (heating circuit, kW	11-25	11-25,8	13-31,3
Thermal power (DHW circuit), kW	11-27	11-27	13-31,3
Efficiency at 100% thermal power, %	91,9	93,8	93,6
Efficiency at 30% thermal power, %	91,2	93,6	93,2
Heating circuit temperature, °C	35-82
DHW circuit temperature, °C	40-65
Capacity of the DHW circuit when heating water at 25 °C, l/min	22,8		25,2
Capacity of the DHW circuit when heating water at 35 °C, l/min	16,3		18
Weight, kg	52	55
Price, rub	84 000	87 700	90 000

Model EGISPLUS available in a 24 kW version and is a worthy continuation of the BS II series.

The boiler is wall-mounted and equipped with a comfortable digital control panel, the price does not exceed BS II:

	EGIS PLUS 24 CF	EGIS PLUS 24 FF
The combustion chamber	open	closed
Thermal power (heating circuit, kW	11,2-25,8	11-25,8
Thermal power (DHW circuit), kW	11,2-25,8	11-25,8
Efficiency at 100% thermal power, %	91,9	93,8
Efficiency at 30% thermal power, %	91,2	93,6
Heating circuit temperature, °C	35-85
DHW circuit temperature, °C	36-60
Capacity of the DHW circuit when heating water at 25 °C, l/min	13,6
Capacity of the DHW circuit when heating water at 35 °C, l/min	9,7
Weight, kg	30
Price, rub	35 500	39 900

Device selection

When choosing a device, you must be guided by the following criteria:

Area of the heated room in m2. It is necessary to select a boiler based on 1 kW of thermal power per 10 m 2 of room. At the same time, it is necessary to understand that this is an ideal option and, taking into account the heat loss of the living space, the average annual air temperature at the installation site and the radiators used, it is necessary to introduce a correction factor. For a preliminary assessment, we recommend using any online calculator that takes into account the above factors and also makes adjustments for the location of the walls (windward or not), ceiling height, and type of windows.
Need for hot water. For high consumption, it is wise to choose the CLAS B model with a built-in boiler, which is more economical.
Boiler installation location. For water heating units with an open combustion chamber, room equipment is required forced ventilation, since the combustion air comes directly from the room. Since devices with an open combustion chamber are designed to remove combustion products through a chimney with natural draft, it is necessary to provide for the installation location of the chimney and chimneys.
IMPORTANT! It is not allowed to pass chimneys through structures made of flammable material.

Device gas boiler

Boiler malfunctions

Most problems that arise can be prevented during the installation of the boiler. Here is a list of the main malfunctions, their causes and measures to prevent device failure:

Failure of the control board. As a rule, it occurs due to poor quality of electricity - power surges, frequent power outages. To prevent breakdowns for this reason, it is necessary to provide. For a private home good decision will be the installation of a backup diesel generator and an automatic reserve input system. It is necessary to protect the device with a circuit breaker, power it via a separate cable line and reliably ground it.
Deterioration in the nameplate characteristics of the device, expressed in underheating of water or reduced performance when heating. It is associated with the presence of contaminants in the water and excessive water hardness. In both cases, deposits appear on the heat exchanger tubes, making it difficult to heat and pass water through the system. To solve the problem of contamination, it is necessary to install a filter, and when using water with a high calcium content, it is recommended to heat the water to 45-50 °C.
Frequent stops due to insufficient water pressure. The malfunction is detected by the device and causes a protective stop. BEFORE purchasing the unit, it is necessary to find out the parameters of the supply water network and make changes to it if the pressure is below 1.5 bar. If the pressure is higher than 6 bar, then provide installation pressure reducing valve. If the parameters of the main network are normal, then turn off the boiler and check the system for leaks.
Frequent stops on the smoke removal system. BEFORE installing the unit, calculate and install the flue ducts and chimney providing the required traction.
Frequent stops due to lack of air. Before installing the device, equip the room with a supply ventilation system.
Non-compliance of operating modes with the stated ones, non-compliance of the coolant with the specified parameters. The main reason is incorrect commissioning and incorrect device settings. Carefully reading the instructions often solves the problem. If necessary, you should involve a qualified specialist who will carry out commissioning and provide instructions on how to use the device.

When choosing a model, contact the company, which will pick up necessary equipment, based on your requirements;
Trust the installation and commissioning of the device a qualified specialist;
Read the instructions carefully operation manual;
Do not neglect periodic preventive examinations And service equipment;
For any frequently recurring fault, turn off the boiler and call a qualified specialist;
Trust repairs and spare parts supply only from a certified organization.

Nowadays, everyone is trying to make their life more comfortable. And the first thing you need to start with is installing an Ariston double-circuit gas wall-mounted boiler. This is very practical equipment, since it can be used to heat your own a private house, or an apartment, or huge premises with an area of up to 500 m².

These boilers can not only heat the room in the cold season, but also heat water for household use. This is very convenient, since you don’t have to additionally connect the boiler, for which you need to choose a separate place. Ariston wall-mounted boilers are extremely easy to use and easy to install. Therefore, both a professional and a beginner in this matter can cope with such work - you just need to first read the instructions for the Ariston boiler.

Rice. 1

It’s also very good that Ariston makes gas boilers for almost any operating conditions. After all, in our country pressure drops natural gas- This is not news, but rather a common thing. There may also be sudden temperature changes - and the Ariston wall-mounted heating boiler can withstand all this.

Features of Ariston gas boilers

What is the most important part in a double-circuit gas boiler? Yes, this is his burner, which burns fuel (in our case gas) and also releases it into the system thermal energy, which heats the room.

The burner is:

Regular.
Modulation.

The second option is more common and convenient, since thanks to it, the Ariston gas wall-mounted boiler system is automatically regulated. That is, the power of heating equipment depends on its temperature. There is also such a mandatory system as the removal of combustion products.

Therefore, the boiler burner is:

Closed.
Open.

Ariston gas boilers with a closed burner are safer heating equipment, since combustion products will never enter the room. They also do not require a chimney. All you need to do is connect a coaxial pipe to the boiler, which can easily be taken outside. Ariston double-circuit gas boilers with an open burner require a chimney, since combustion products must be removed. And for this you need natural traction. Air will also be taken from the room, so it must be constantly ventilated.

The good thing about a coaxial pipe (for a closed combustion chamber) is that it is made of so-called two layers. This design coaxial chimney good because combustion products escape through the pipe, but at the same time Fresh air enters the burner of the Ariston boiler. This means that oxygen will not be taken from the room.

Rice. 2

What else are good double-circuit boilers Ariston? And the fact that they are not one heat exchanger, as in single-circuit ones, but two. One is intended for heating the room, and the other is for heating water. Ariston company produces various options boilers They may contain separate heat exchangers, duothermal, and also have a built-in water heater tank.

What other features are there in Ariston gas boilers:

They have a water pump to circulate water through the pipes. The presence of an expansion tank is also found in many models. Thanks to it, the pressure in the heating system is normalized without outside help.
This heating equipment may have Various types ignition Ignition can be either fully automatic, which makes working with the boiler much easier, or piezo-ignition. In the second option, to operate the heating system, you need to press a button to start the unit.
Any model of Ariston automation and protection systems.

Advantages of Ariston boilers

There is a wide variety of different heating units on the market for this technology. Therefore, each person will be able to choose a model that suits their wallet. But why Ariston? But because people, when they come home, want to be alone with themselves and enjoy the silence. And the gas units of this company are able to satisfy this desire.

Compatriots began to trust these products more and more. And for good reason. After all, the Ariston double-circuit gas unit operates almost silently. Thanks to him, bills for public utilities will be minimal, since this boiler is a fairly economical unit. Fuel is used in minimal quantities.

You will receive a system that supplies you with hot water around the clock, and also heats your apartment or house for a minimal fee. Also, the units of the Italian brand last longer than what is written on the warranty. By purchasing such a device, you will forget about exchanging the boiler for many decades. It is also very good that Ariston units are compact in size, so there is a place for it in absolutely any size apartment or private house.

How to choose gas heating equipment

The Ariston product catalog contains many models, and looking at them makes it difficult to make the right choice. Many people, when they come to a store for this equipment, make mistakes, since they do not have all the necessary information before purchasing a wall-mounted unit. Therefore, recommendations on choosing a boiler from this company will be written below.

Rice. 3

Each model has many technical features, and, of course, because of this, choosing the right heating device becomes increasingly difficult. At first glance, it may seem that gas units are similar to each other, but only a professional can understand the intricacies. So you can contact a specialist by choosing an Ariston boiler, or you can read the information and try to make the right choice yourself.

So, what to consider before choosing quality equipment:

Of course, everyone knows the size of their kitchen, or the place where the heating unit will be installed. Therefore, the first thing to do is to consider what sizes of boilers are available, select the most optimal ones, and only then move on to the technical features.
Next, you need to take into account what type of water heater is in the gas appliance, because most low-priced models have instantaneous water heater. This means that if you have a large family, then such a double-circuit boiler is not suitable for home use.
It’s better to choose a hot water storage tank – how many liters it will hold is up to you to decide. The storage tank heats a large volume of water, which is then used for quite a long time.
There are two types of combustion chambers in Ariston gas units. These are a closed combustion chamber and an open combustion chamber. Of course, it is better to choose a boiler with a closed combustion chamber. This heating unit does not use room oxygen, so it is safer for health. Plus, you still don’t have to install a chimney. It is enough to purchase a coaxial pipe and lead it through the wall. But since such a boiler is more expensive, not everyone can afford to buy it. Although if you think about your health, it’s better to save up cash and buy a really high-quality product.

In just a few decades, Ariston has come far ahead thanks to the high quality of its products. You can constantly look at new models and be amazed at how quickly technology develops. Choosing a boiler is really difficult, but the right information will help you with this.

Types of heating boilers Ariston

All heating units from this company have three series. They differ from each other in some technical features.

So what are the series? famous brand:

Genus- These are the most developed models. They have more functions than models in other series. The Genus device kit includes: primary and secondary heat exchangers, as well as a fan that smoothly regulates the speed. All Genus wall-mounted boilers have an LCD screen sufficiently large sizes. On it you can see all the data on which the gas unit operates.
Clas– powerful and large (volume) heating units. They have a built-in regulator that supplies gas. Thanks to it, you can regulate gas flow. This is very convenient especially for those who are often away from home.
Egis. All heating models from this series are small (compact) in size and very attractive in appearance. Their design will decorate any interior. They also have high level Efficiency, which allows you to reduce utility costs. There is also an intelligent control system gas apparatus Ariston Egis series.

Rice. 4

Technical characteristics of Ariston gas boilers

All boilers of this brand have a power of 15 to 30 kW. You can choose exactly the power that suits the size of your house or apartment.

So, technical features wall-mounted heating units:

the very good thing is that the menu of wall-mounted boilers for Russian citizens also available in Russian. Therefore, you can easily set the temperature that should be;
in places where power surges often occur, these Ariston heating devices are best suited. They can withstand them without problems;
Gas units also cope well with reduced gas and water in systems.
gas double-circuit units are easy to operate. They are also easy to install, so even a beginner can handle it.
they have a high level of efficiency and are quite economical.

Of course, there is the possibility that the boiler will not be able to heat at the same time heating system and water, but this is not a big problem. Since, if necessary, you can install a boiler in parallel to heat water.

Rice. 5

Some models of gas wall equipment may even have sensors that detect the internal and outside temperature air, so they work even more efficiently. The built-in display will show all the parameters by which the unit operates, so you can correct everything in time.

For what reasons does an Ariston gas boiler fail?

There are options when all connection and operation parameters have been met, but the heating boiler is still faulty? Like all equipment, gas units can also fail.

There are reasons for this:

a malfunction may occur due to the fact that some maintenance rules were violated, or the installation was unsuccessful;
Malfunctions of the Ariston gas double-circuit boiler also occur when there is insufficient air supply. The combustion chamber must constantly receive air in order for it to operate at full capacity. If there is not enough of it, then, accordingly, various problems with the boiler will appear;
Malfunctions may also appear due to incorrect work carried out by specialists when servicing the control units or adjusting the burner;
The market is full of low-quality products, so spare parts are also often found to be of low quality. Even if the installation or replacement of something went well, a malfunction can still appear precisely because of imperfect spare parts.

This is not the entire list of breakdowns that can occur with a gas unit. But one condition for repairing all models of Ariston boilers must be fulfilled - calling a specialist who understands such issues to your home. Work with gas equipment- this is far from a safe task, therefore it must be carried out by experienced employees who have permits for repairs and all the necessary spare parts.

Instructions for using Ariston gas boilers

If you are not a professional in the field of installing gas heating units and do not understand anything about their installation, then you should definitely contact experienced specialists who will help you solve these problems. First of all, they have everything necessary permissions, and secondly, they will give you instructions, thanks to which you will “find a common language” with heating boilers.

Children or those who have not been instructed in the use of the units should not be allowed to access gas equipment. Because this is fraught with various consequences. If you are going to go somewhere for for a long time, then after turning off the boiler, it is necessary to close all the valves on the pipes (gas shut-off valve and water supply shut-off valve). Then you need to disconnect the gas heating equipment from the network.

During operation of wall-mounted units, it is necessary to monitor all readings that are displayed on the display. The display of wall-mounted heating devices shows all the problems and errors that occurred during the operation of the boiler. The safety precautions that are written in the instructions must be observed not only with a double-circuit gas boiler, but also with other gas equipment.

Advantages and disadvantages of Ariston gas boilers

Wall-mounted heating units, like any other equipment, have their pros and cons. But, of course, there are more advantages. And if you also follow all the operating rules, then there will be much fewer disadvantages. The models of this company are both wall-mounted and floor-mounted. Wall-mounted boilers are more popular equipment, since they are intended mainly for heating private houses, apartments, cottages, etc.

Wall-mounted heating units are:

with a closed combustion chamber (without chimney design);
with an open combustion chamber (a chimney must also be installed).

Wall-mounted units with a closed combustion chamber are safer equipment for heating, since oxygen will not be taken from the living space. But for them, it will also be necessary to make a forced removal of combustion products. The easiest way is to install a coaxial pipe. It is made in such a way that it can simultaneously remove combustion products and deliver oxygen to the combustion chamber.

Rice. 6

Also, gas wall-mounted units must have a built-in fan. They are considered the safest option for use, but, unfortunately, they are more expensive than boilers with an open combustion chamber.

The disadvantage is that Ariston double-circuit gas heating units, when heating water, stop heating the living space for some time.

Floor-standing models are made specifically for industrial buildings, but they cannot simultaneously heat water. Therefore, if, after all, heating water is required condition, then you will also have to acquire a boiler that can be connected to a gas heating unit.

All wall and floor equipment meets all safety regulations. Wall-mounted gas boilers are fully adapted to the conditions of the gas distribution system of Russia, as well as the CIS countries. And, despite the fact that there is often reduced gas in Russia, wall-mounted units will still continue to work perfectly.

Before purchasing a wall-mounted or floor-standing unit, you must first familiarize yourself with the necessary information, and only then proceed directly to the purchase.

Double-circuit gas appliances make our lives more comfortable and enjoyable. They are quite practical to use, suitable for heating country houses, and small apartments. They are used for heating industrial or warehouse buildings with an area of no more than 500 sq.m.

The advantages of Ariston boilers are that in addition to heating buildings in winter period, they heat water used in everyday life all year round. This is quite convenient and does not require the installation of additional equipment.

General characteristics of Ariston boilers

The description of Ariston gas units must begin with the characteristics of their main part - the burner. This element is used to burn fuel and release thermal energy into the heating system.

Types of boiler burner:

regular
modulation

The modulation burner is more convenient to use. It provides automatic regulation power depending on the temperature of the device.

According to the type of exhaust of combustion products, burners are divided into:

Units with a closed burner are safer to use. In this case, natural gas combustion products do not enter the room. No use required. A coaxial pipe is simply connected to the device and taken out.

Design coaxial pipe provides for the presence of two layers, which ensures the simultaneous removal of waste and the flow of air from the street into the burner.

Equipment with an open burner requires the use of a chimney to remove combustion products.

Technical data of Ariston gas appliances

Ariston boilers used for heating and water heating, that is, they are double-circuit. Each modification has its own characteristics, but the common type of fuel is gas.
The gas combustion chamber can be either open or closed. If there is a chimney, units with an open chamber are used. And in apartments of multi-storey buildings, where there are not always chimneys, equipment with a closed combustion chamber is used.
Power. Using this indicator, the gas consumption required to heat the room is calculated.
Compactness. Wall-mounted appliances are used in small, narrow rooms. Floor-standing units used in production or warehouse areas are heavier and require more space for installation.
Availability of a control unit. This element is indispensable when the water is turned off or when there is a sharp decrease in gas. In case of any malfunction, the unit will immediately turn off the device, which will prevent breakdown. It can also help you save fuel consumption.

Ariston boilers are used for heating and water heating, that is, they are double-circuit

Characteristics of Ariston boiler models

A distinctive feature of Ariston boilers is their high quality. After all, the name of the company is translated from Greek as “the best.”

Its products are especially popular among middle-income consumers. Gas boilers of this brand are purchased for heating rooms up to 500 sq. m. The company's products are universal. The transition to liquefied fuel is carried out only by replacing the burner.

Double-circuit wall-mounted gas appliances are practical to use. It is represented by three lines, each with its own modifications.

All boiler modifications have in common:

small size.
supply of hot water, in the absence of a centralized supply.

Different modifications differ in structure, but what they have in common is low cost and high-quality workmanship of parts.

Basic equipment of units from Ariston:

double .
electronic control module.
carbon monoxide control.
microclimate support in a building or in a separate apartment.
control of water freezing inside the system.

Let's take a closer look existing species Ariston equipment.

Ariston Genus

Available with double heat exchanger. All modifications are double-circuit and wall-mounted.
This model is considered the most functional of all Ariston devices. Has an LCD display and a button control panel. Ariston Genus can be configured to autonomous operation for a whole week.
The display shows basic data on the status of the device and a list of possible errors. The burner is modulating, that is, completely controlled electronically. This function increases the comfort of using this model of gas appliance, due to minimal control by the consumer.

The Ariston Genus line includes the Evo and the more expensive Premium models.

The Evo model is a dual-circuit gas appliance with both types of burner: open and closed.

Genus Premium condensing boilers. They are used for heating residential and commercial buildings. Power range from 24 kW to 35 kW.

Ariston Clas

The device is small in size.
This is a boiler with two circuits and an elegant appearance. The reduced dimensions did not impair its functionality in any way.
Expansion tank 8 l. Hot water heats up quickly

Existing modification:

Evo is available with open and closed combustion chambers. Power with an open burner is 24 kW, with a closed burner - 24 - 28 kW.
Premium Evo is a condensing type device. Has advanced comfort and frost functions
Premium simple condensing unit.

Ariston Egis

Installed mainly in rooms up to 200 sq.m.
Our most common model of gas appliance is Ariston. It heats the water with a stainless steel heat exchanger, and a copper heat exchanger is used for heating.
The compact device is economical and can be used in difficult weather conditions. For example, at sharp subzero temperatures.
The device is equipped with a modulated gas burner , which allows electronic control over the operation of the boiler.

This model is adapted to work in harsh conditions climatic conditions. Normally withstands gas pressure changes. The device is equipped with a collector into which condensate flows. This ensures operation at temperatures below 50 degrees.

Cost of Ariston boilers

The average cost of Ariston Genus boilers is 54,000 - 72,000 rubles, Ariston Clas - 25,000 - 34,000 rubles, Ariston Egis - 27,000 - 34,000 rubles

Choosing a gas appliance for heating

Ariston products can be found in catalogs. There are many models of gas appliances available there. Basic mistakes when wrong choice units are made due to lack of information. Therefore, before visiting the store, you should familiarize yourself with the basic tips for choosing a wall-mounted gas appliance.

When choosing a boiler, consider the following points:

The size of the kitchen as the place where the heating device is most often installed. In the store, the choice begins with consideration overall dimensions device and select it individually for your kitchen.
Next, move on to the technical data and study the type of water heater in the device. If in the family a large number of person, it is not recommended to purchase a boiler with.
In this case, it is more rational to purchase a boiler with storage tank for hot water and select equipment for the amount of water that you will need for everyday use.
Evaluate the combustion chamber of gas equipment. It can be closed or open. It is recommended to choose a boiler with a closed chamber because it is safer to use. The presence of a chimney is not necessary, which is important in multi-storey buildings. All you have to do is buy a coaxial pipe and put it outside.