Nowadays, gypsum tongue-and-groove slabs are a popular material for the construction of walls and partitions in rooms with dry and normal conditions. humidity conditions. When installing structures made of PGP, gypsum glue is widely used.
As gypsum adhesive manufacturers, we can offer you the most attractive prices. Glue for gypsum boards produced by the Peshelan Gypsum Plant is supplied in convenient packaging of 30 kg. Ready mix excellent for installation of tongue-and-groove slabs and wall blocks, frameless fastening of gypsum particle boards, insulation, gypsum stucco and performing other work.
Features of application
IMPORTANT! Work with the mixture must be carried out only in rooms with dry and normal humidity conditions and a temperature not lower than +5 degrees. The viability of the solution after preparation remains for 35-40 minutes.Gypsum adhesive produced by the Peshelansky Gypsum Plant compares favorably with its analogues due to its increased strength and excellent water-retaining properties. A big advantage is the ease of preparation and use of the solution, as well as the speed of its setting.
Gypsum glue allows you to perform any complexity Finishing work with the highest possible quality.
Tongue and tongue slabs are presented on the market today in a wide range. However, Knauf products are one of the most popular. This is due to many factors.
Reviews of tongue-and-groove slabs
Knauf tongue-and-groove slabs are rectangular blocks, the dimensions of which are 667x500x80 mm. To connect the elements together, a tongue-and-groove lock is used, which is made from building gypsum and binding components.
The described products are used for the construction internal partitions and cladding of house walls. Consumers really like the versatility. Among the additional advantages of the described slabs, buyers highlight the opportunity to reduce the cost and labor intensity of laying partitions when using such products. Confirmation may be specific example: tongue-and-groove slab replaces red brick in the amount of 20 pieces or 14 pieces of sand-and-a-half bricks.
Among other things, gypsum boards provide excellent thermal insulation. Consumers emphasize that the 40-cm concrete wall. Buyers quite often choose these slabs for the reason that they provide economic benefits. Installation can be carried out by gluing or using dry technology.
Plastering work is excluded, the front surface of the products is of high quality. All you have to do is seal the seams and sand the base. There is no need to use special equipment during installation. Consumers emphasize that nails can be easily driven into Knauf tongue-and-groove slabs. In general, this material is easy to process: it can be planed, milled, and sawed. Therefore, the issue of laying pipelines and electrical wiring disappears. After installation, according to consumers, the wall is immediately ready for painting, wallpapering and tiling. The partition occupies a smaller area compared to a brick one.
Why choose a tongue-and-groove slab from Knauf
If you are still undecided whether the described slabs are suitable for you, then you should consider their additional advantages. Among others, one can highlight a high sound insulation coefficient, which reaches 41 dB. When constructing openings within 0.9 m, there is no need to reinforce top part using a jumper beam. The formed walls are able to reflect noise waves, in addition, they act as a dielectric.
Knauf tongue-and-groove boards have the same acidity as human skin, and the material has no odor. It can be used for the construction of single and double partitions, the latter of which require a 4-cm air gap. Everything will depend on the noise protection requirements.
Plates are installed with high accuracy and are connected to each other as firmly as possible. Internal walls able to bear weight kitchen cabinets, shelves and plumbing fixtures. In this case, there is no need to strengthen the surface. Knauf tongue-and-groove slabs have additional benefits, among which we should highlight:
- fire resistance;
- vapor permeability;
- environmental friendliness.
Technical characteristics of moisture-resistant solid slab 100 mm
As an example, before purchasing, you can consider Knauf moisture-resistant tongue-and-groove slabs. Among others, a 10 mm product should be highlighted, which has a gray or green color. The raw material is G-5 gypsum.
The compressive strength is 5 MPa. The thermal conductivity coefficient can reach 0.29 W/m °C. As for the flexural strength, it is equivalent to 2.40 MPa. Fire resistance limit - 2.5 hours. The size of the slab is 667 x 500 x 100 mm. Sound insulation is kept at 41 dB. Such solid tongue-and-groove slabs "Knauf" are manufactured according to technical specifications 5742-007-16415648-98. The wholesale price is 250 rubles. a piece.
The mass of the plate is 38 kg. Its density is 1250 kg/m³. The volume of one block is 0.03 m³. The above sound absorption coefficient is one of best performance among all categories of this material. Partitions constructed from the described slabs are most often used in rooms with high humidity. Among these are:
- kitchen;
- toilet;
- bathroom.
Key Features
The increased thickness of the product allows you to hide pipes, communications and wires of impressive diameter inside. This feature is relevant for bathrooms and other rooms where there is a large number of water communications.
Using such Knauf tongue-and-groove slabs, the price of which was mentioned above, you can no longer worry that sounds from the toilet or bathroom will disturb you in your living space. And the shelf will not collapse if you place it on such a surface. Partitions can be erected up to a height of 3600 mm, and no additional support frame is required. The manufacturer classifies these plates as premium.
Glue for PGP "Bolars"
If you decide to install Knauf tongue-and-groove gypsum boards, you should worry about the presence of special glue. As an example, we can consider the Bolars composition, which is sold in 20 kg bags. You will have to pay 215 rubles for such a volume of material.
It is a special mixture for installing plasterboard and gypsum fiber sheets, gluing mineral wool boards to vertical surfaces. This glue can be used to seal joints. It has a gypsum base and is made using highly effective additives.
Advantages of glue
Application of glue for tongue-and-groove slabs is carried out manually. Among the advantages of this composition are:
- quick fixation of slabs;
- reasonable cost;
- highly elastic structure.
Thanks to the latter property, the glue is very convenient to use. It is sold dry and packaged in paper bags. The composition is manufactured in Russia, therefore it has an affordable price for the consumer. The material has a wide range of uses, because it can be used to install not only tongue-and-groove slabs, but also plasterboard and gypsum fiber sheets.
Glue characteristics
Adhesion is 1 MPa. Operating temperature varies from +5 to +40 °C. It is recommended to use the composition in bathrooms and living rooms. It is suitable for fastening insulation and gypsum tiles.
Before purchasing glue for tongue-and-groove slabs, it is recommended to calculate the required volume of material. Using the volume of one bag, you can install 35 slabs, which is true for products with dimensions that are 66 x 78 x 5 cm. The thickness of the seam should be 2 mm. You should prepare the amount of solution that you can produce in 40 minutes. The time for on-site correction of the product is 15 minutes.
Conclusion
GGP "Knauf" can be used not only for the formation of traditional wall partitions, but also for fastening products to ceilings. These canvases quite often act as acoustic barriers and are attached using direct hangers, combined and vernier clasps; you can use the technology that is convenient for you. If the base is load-bearing wooden floors, then Knauf self-tapping screws should be used. In the presence of reinforced concrete floors You will need ceiling dowel-nails from the same manufacturer “Knauf”.
From leading Russian and foreign manufacturers By affordable price. The products presented in our catalogs, and in particular the glue for pgp, the price of which depends on the type of mixture, fully comply with all quality and safety standards.
Buy glue for tongue-and-groove slabs can be done online directly on our website, and thanks to our delivery service, the client does not even have to leave home. All goods ordered in the store will be delivered to the specified address directly on the day of purchase.
Gypsum adhesive for pgp - features and composition
Glue for installation of pgp is a universal gypsum-based construction mixture that allows you to quickly, efficiently and reliably fasten tongue-and-groove slabs, while ensuring high quality masonry. The adhesive for installation of pgp, as a rule, includes the following components:
- Gypsum.
It is the main binding element of almost any adhesive for tongue-and-groove slabs, the price of which depends on many factors. It is thanks to the gypsum binder that gypsum adhesive for installation of pgp provides the necessary strength for high-quality and reliable masonry.
- Quartz or fine sand.
This component in the adhesive for pgp, which you can buy right now, acts as a filler, significantly reducing the cost of production of this mixture and market price gypsum glue for installation of pgp.
- Chemical additives, additives, modifiers.
These components make it possible to significantly increase the ductility of the adhesive for installing pgp, as well as extend the viability of the finished solution, which is important when working with large volumes of masonry.
The main purpose of glue for pgp
As the name implies, glue for pgp is moisture-resistant and regular and is used exclusively for laying tongue-and-groove slabs, which you can also purchase in our online store website. In addition, glue for pgp, which anyone can buy today, can be used for laying gas silicate blocks, and any wall blocks based cellular concrete. Due to its unique composition, moisture-resistant adhesive for pgp perfectly withstands the impact chemical elements, not susceptible to fungus or mold. High-quality glue for pgp, the price of which can vary widely, is the key to the strength and reliability of the walls of the building.
Use glue for pgp during installation interior partitions in apartments or private households. It should be noted that the adhesive for pgp is moisture resistant and can be used when arranging partitions in rooms with increased level humidity, such as a bathroom, toilet, etc.
Buy glue for tongue-and-groove slabs in Moscow
Online store site, offers to buy glue for pgp and others building mixtures wholesale and retail in Moscow and the Moscow region. With us, you will find everything you need for repairs and construction at the best prices in the region. You can buy glue for pgp by adding the product to your cart, or by calling the numbers that you can easily find in the “Contacts” section. It should be noted that we deliver purchased goods throughout Moscow and the region; you can find the terms and delivery costs in a special section.
To the question Laying tiles on plaster wall from tongue-and-groove blocks... specified by the author Staff the best answer is If we were talking about a kitchen, we could get by with rotband plaster (the tiles stick to it normally).
But the linear expansion of materials in the kitchen and humidity are insignificant.
In the bathroom it's a different matter. And when building up a wall, dissimilar materials will crack along the joint, making gouging out the grooves a hassle.
You want your tiles to last at least 20 years?
In general, screw it up plaster mesh stick waterproofing on top of the wall, floor mesh at the bottom of the wall (a strip so that 10 cm extends over the floor and wall) - at least a piece of roofing felt.
Plaster over the mesh with a compound for wet rooms on CEMENT based(after all, tile adhesive contains a cement component and adhesion will be better) and sculpt the tiles to your health.
Plaster on a grid will hide the joint of the wall being built up and strengthen the wall itself.
This will of course be considered a perversion!! But this is a very reliable perversion))
Winds
(163432)
you're welcome.
twist the grid as close as possible.
Answer from 22 answers[guru]
Hello! Here is a selection of topics with answers to your question: Laying tiles on a plaster wall from tongue-and-groove blocks...
Answer from Eurovision[guru]
Of course it is possible.
Answer from Get dirty[guru]
This is how I have it all done.
Answer from -=chess=-[guru]
you can if you know how to do it - simply you need to dilute the tile adhesive on a primer without water and putty all the walls after drying, you can simply prime it and - you can glue the tiles onto a tongue-and-groove block
Answer from Sergey[guru]
The plaster must first be isolated. You can do the same tile adhesive plaster a plaster wall. Only first you need to make notches on it for good adhesion.
Answer from Yotas Shabanov[guru]
I would line the wall gypsum plaster, then tiles
Answer from Yergey Krishtofenko[guru]
First, build up the partition. Then reinforce it with strobe mesh. This is a fiberglass mesh similar to serpyanka, only sold in meter-wide rolls and without an adhesive layer. Take one with a cell of 5*5 mm. You shoot this mesh to the wall with a construction stapler. Like wallpaper, only with a 10cm overlap between the sheets. You don't have to shoot too accurately. The main thing is that it stays on the wall and the staples do not stick out from the plane of the wall.
Next, coat this mesh with gypsum plaster. Dilute it a little thinner than usual and spread a thin layer over the entire wall with a wide spatula.
After drying, plaster with the same gypsum plaster in the required layer.
Let it dry thoroughly. Next, glue the tiles.
You need to prime before the strobe, after the strobe and after plastering.
If something is not clear or additional information is needed. information - write :)
Answer from dancer[guru]
Who will stop you from doing this?)
but be sure to think about waterproofing (can you imagine what happens to drywall when it gets wet), choose high-quality glue (or better yet, use good cement, which is suitable for laying tiles, for example, “Master”) and remember the distance between the tiles. By the way, you can also build up the wall using cement mortar. Good luck!
Answer from Yokarificator[guru]
Waterproof the shower area and glue the tiles with reinforced adhesive. The wall can be extended.
Answer from Val Franco[guru]
You can do it without waterproofing, but then your shower will look like in the last photo...
Gypsum adhesive has high adhesion and elasticity; it quickly fixes tongue-and-groove boards and plasterboard, as well as other building panels. Gypsum glue belongs to the group of finishing materials for interior work.
Preparation of the solution.
To prepare the glue, you need to dilute 1 kg of dry mixture in 0.47-0.53 liters of clean tap water(for 1 bag 30 kg - 15 liters of water). Such Decoration Materials You can mix it either manually or mechanically (with a drill with an attachment), evenly pouring the dry mixture into water until a homogeneous paste-like mass is obtained. Leave the solution for 5-10 minutes. Then you need to mix it a second time and the glue is ready for application to drywall or other building slabs. The solution is in working condition for at least 1 hour (at a temperature of +20 C).
Substrate preparation, application.
Before gluing tongue-and-groove boards, plasterboard or other building panels to the base, it is necessary to prepare it: clean it of substances that weaken adhesion. Dust and grease should be removed glossy surface sand, smooth out significant unevenness with finishing materials and putty. It is recommended to treat the surface - drywall or other finishing panels - with a primer.
When installing partitions and walls using gypsum boards (GGP), a gypsum adhesive solution is applied to the base of the slab installation or to the ridge side of the slab using a spatula. The slab is placed on the glue, and it is aligned relative to the markings made or the plane of the wall using a level and rules. Plates connected to each other with an adhesive solution must be adjusted within 10 minutes. When sealing slab joints, excess gypsum mortar emerges between the seams, which must be removed with a spatula and subsequently used to seal the seams.
Work should be carried out at air temperatures from +5 C to +30 C. Drying time is 4 hours. Full strength is achieved after 24 hours.
Glue consumption.
The average glue consumption is about 1.5-2 kg per sq.m. A bag weighing 30 kg is designed for an average of 15 sq.m. when installing a single partition block.
Precautionary measures.
Avoid contact of the solution with the eyes. If the solution gets into your eyes, rinse them with plenty of water. When using high-adhesion finishing materials in work, we recommend using rubber gloves.
Packaging and storage.
The glue is supplied in 30 kg bags. Guaranteed shelf life in a dry place and undamaged original packaging is 6 months from the date of manufacture.