Mirror tiles with bevels appeared on the market of finishing materials not so long ago. Designers, finishing professionals, and home craftsmen immediately understood the benefits of using this modern, sophisticated, highly decorative coating. You can bring to life the most daring and interesting solutions for interior design using this material.
In contact with
- Bathroom finishing
- Kitchen finishing
- Living room decoration
- Public premises
- How to glue mirror tiles
Mirror tiles with bevel - what is it?
To obtain a bevel, the mirror is processed in a special way: a chamfer is removed from its beveled side. This processing gives the product sophistication and sophistication, allowing you to reveal new facets of mirror surfaces.
Using mirror tiles
Apply this modern sophisticated finishing material for decoration various rooms.
Bathroom finishing
Reflective surfaces look great in the bathroom. For small rooms, designers often use just such tiles. The ability of mirrors to expand space allows you to make a tiny bathroom visually much more spacious and brighter. Designers advise choosing different types tiles of the same size so that in the right place It was possible to make a mirror insert.
Mirrors are not afraid of moisture, are resistant to scratches and mechanical damage, and their surface is easy to care for. The aesthetic appearance is beyond praise.
A kitchen with mirror inserts on the walls or ceiling will always look stylish and expensive. The play of light, the glare reflected in the mirrors, creates a solemn, upbeat mood. The undoubted effect is the expansion of space and visual magnification ceiling heights. A kitchen with a similar finish can be made in the Empire, Baroque, or exquisite classic styles.
Important: do not overdo it using mirrors, so as not to achieve the opposite effect. Rooms overloaded with light-reflecting surfaces look tacky, the space seems distorted. It is not recommended to glue beveled mirror tiles on opposite walls.
If you decide to create an expensive, luxurious interior in a palace style, decorative elements such as mirror inserts on the walls or ceiling are perfect for this purpose. Some designers prefer to apply painting, engraving, and patterns to the surface of the tile. The surface takes on a refined appearance.
In the living room, a mirrored ceiling framed with gilded baguettes will look luxurious. You can create a panel on the wall in which mirrors will be combined with glass and interior lighting. Entrust such delicate work to a talented designer. A flight of fancy is good, it is important to keep it in moderation and create a stylish, luxurious composition.
The perfect combination: candles and mirrors. Sconces with crystal pendants placed next to an exquisite composition will add charm and charm to any living room. Only natural wood, leather and rich fabrics can be used in a living room decorated with mirrors various shapes and sizes.
This material is successfully used for decorating restaurants, cafes, shopping centers, recreation areas, hotel lobbies and office centers.
Photo
Get to know interesting interiors, in the decoration of which mirrors are used. Among them there is not a single boring, gray and faceless one. Any room, be it a cafe or restaurant, bathroom or kitchen, living room or corridor, thanks to the efforts of the designers, breathes freshness and lightness. Exquisite lines, play of colors, stylish design pleasing to the eye. Single inserts, entire mirrored walls and ceilings make you say in admiration: “Wow! What a beauty!" Look, admire, look for yours! 
How to glue mirror tiles
Walls, ceilings, doors in any room, regardless of the level of humidity in it, can be finished with this modern material. High-quality preparation will ensure the best adhesion and long service life.
Stages of work:
- clean the walls and ceilings of wallpaper, paint, debris and dust;
- remove the protrusions sharp corners, tubercles. Fill the holes with putty;
- apply a layer of primer;
- if necessary, treat with compounds that prevent the development of fungus and mold;
- Before gluing each fragment, the surface must dry thoroughly;
- to even out the thickness of the mirror and ceramic tiles, use a cement-sand mixture;
- glue on cement based not suitable for mounting mirrors;
- neutral sealant, special mirror glue or “liquid nails” will securely hold the tiles on the wall, ceiling or doors;
- It is not recommended to use vinegar sealants;
- After fixing the tiles, make the edging from the selected material.
Mirror tiles with bevel. Prices
It's nice that this material for interior decoration has reasonable price. To create exquisite interior With mirror inserts you don’t need to spend crazy amounts. An expensive interior for a reasonable price is one of the advantages of using this high-quality, aesthetic coating.
Price mirror tiles depends on its size, the presence of a pattern or engraving, the color of the coating, the shape of the individual unit (triangle, rectangle), and the manufacturing company.
Here are some options:
Color: Silver. Facet – 10mm. Thickness – 4mm. Price for 1 unit.
- 40x40mm – 52 rub. (rectangle);
- 60x60mm – 78 rub. (rectangle);
- 300x300mm – 240 rub. (rectangle), 194 rub. (triangle).
Color: Silver. Facet – 10mm. Thickness – 6mm. Price for 1 unit.
- 150x150mm – 115 rub. (rectangle), 104 rub. (triangle);
- 400x400mm – 394 rub. (rectangle), 317 rub. (triangle);
- 600x600mm – 712 rub. (rectangle), 575 rub. (triangle).
If you want your room to stand out from others, don’t be afraid of bold experiments and the use of new materials. Mirror tiles with bevels will organically fit into any interior and give it a zest.
In contact with
See inaccuracies, incomplete or incorrect information? Do you know how to make an article better?
Would you like to suggest photos on the topic for publication?
Please help us make the site better! Leave a message and your contacts in the comments - we will contact you and together we will make the publication better!
ru-house.net
How to glue mirror tiles
The use of mirror tiles is now widespread, partly because mirror walls visually expand the space, hide defects, create false niches, raise and lower the ceiling, and can also be used to create various elegant effects. Mirror tiles are available in both simple version, and with various patterns or relief finishes.
A room in which mirror tiles are used looks unusual and creates the impression of depth and radiance; moreover, the gluing process does not take much time and can be done even by a non-professional. First of all, you need to decide what to glue the mirror tiles onto. If it is glass coated with amalgam, Mirror sealant is suitable, which can firmly attach the mirror to any surface.
In other cases, other sealants, glass glue or “liquid nails” are used. Long-term adhesive should not be used, as this will require the installation of additional supports. Before gluing the mirror tiles, the wall surface is carefully prepared: the old coating and paint are removed and thoroughly sanded; if necessary, the wall is leveled, because the mirror surface must be perfect.
Standard mirror slabs are produced in sizes 25*25, but if you plan to cover a large wall, it is advisable to purchase tiles bigger size, which is sold at any hardware store. Next, you need to make a drawing that will accurately indicate the position of the tile: here the designer’s imagination may vary. Mirror tiles are placed horizontally and diagonally, or even randomly.
Final preparations: draw a line with chalk on the prepared surface and check its direction using a plumb line or level. How to glue tiles correctly so that the mirror wall looks even, and the tiles themselves have equal gaps between each other and do not “run into” each other? The tiles are laid sequentially from the bottom corner of the wall to the top, and the back side of each tile is coated with glue or “liquid nails.”
It is advisable to check each row with a level so as not to lay the tiles crookedly; it is almost impossible to re-glue an already finished wall without damaging the material.
06/05/2013 In contact Twitter Facebook Odnoklassniki My world Livejournal
www.decore.ru
How to lay mirror tiles or install a mirror panel
How to lay mirror tiles
Tiles with a mirror surface are a new word in decorating walls and ceilings in an apartment house. Surprisingly, laying mirror tiles with your own hands is not difficult. special labor, subject, of course, to following certain recommendations.
Besides the fact that mirror tiles are great decorative material, its surface is also resistant to various detergents and to moisture. Well, thanks to the ability of 95% light reflection, mirror tiles placed in the bathroom can not only make it visually larger, but also lighter.
How to lay mirror tiles will be discussed in this article.
How to lay mirror tiles
And although mirror tiles are not afraid of moisture and cleaning agents, you should not forget that this is a rather fragile material, which must be handled very carefully. This is due, first of all, to the small thickness of mirror tiles, which is almost 2 times less than the thickness of ordinary ceramics.
Therefore, the base, before laying mirror tiles on it, must be more carefully prepared than in a number of individual cases:
1. To do this, remove plaster, glue and wallpaper from it. Sometimes, when the old finishing material does not hold up well, you even have to scrape the wall down to concrete or brick, depending on what material it is made of.
2. The cleaned base is then leveled to the ideal level. If you do not level the surface before laying mirror tiles on it, then you can forget about the effect created by this decorative material.
3. After all the above procedures, the wall is primed. As a result, the base, before laying mirror tiles on it, should be as smooth and well-primed as possible.
Laying mirror tiles on the wall
Before laying mirror tiles on the wall, carefully select adhesive composition designed specifically for these purposes. It is important to know that cement-based glue is absolutely not suitable for this.
When choosing adhesive for mirror tiles, you also need to be careful with various types sealants, the main component of which is vinegar, since it can destroy the amalgam of the mirror surface.
In this case, ideal option adhesive for mirror tiles is a special composition designed specifically for working with mirrors. Mirror tiles can also be glued using liquid nails or neutral types of sealants. By the way, you can read about how to use liquid nails in another article on the website http://samastroyka.ru/.
Laying mirror tiles on the wall is carried out in the following steps:
1. First, the surfaces are marked. It is advisable, in order to get a complete picture of how the mirror tiles on the wall will ultimately look, to first lay them out on the floor in the desired shape.
2. After marking, the mirror tiles are laid on the wall, and it begins in the traditional format - from the bottom up. When gluing tiles, it is very important not to deviate from the existing markings, continuing to glue the material from the corner, along horizontal rows.
When laying mirror tiles, small gaps should be made to help compensate for the expansion of the material during its operation. This is especially true for rooms where there are constant temperature changes.
Mirror tiles should be stored in a vertical position, this will protect its surface from damage. If you need to cut mirror tiles, the best tool for these purposes is diamond glass cutter.
Well, read about how to cut glass correctly in the following review of a construction magazine.
samastroyka.ru
Ways to glue mirror tiles
Mirror tiles have become popular not so long ago. Many designers and finishers immediately understood its capabilities and take it into account when designing. How to lay mirror tiles video material for builders. With this material you can realize those bold ideas that were not possible before.
How to glue “mirror tiles” in the bathroom (renovation)
Mirror tiles are intended for decorating rooms. This material can be used in dry and damp areas.
Surface preparation and requirements for it.
Mirror tiles can be applied to any material that is sufficiently durable and pre-primed.
1. In order to ensure good adhesion of the tiles to the base, before application the surface must be dust-free and free from wallpaper, loose paint, chalk, and lime.
2. If necessary, apply compounds to combat efflorescence, fungi, mold, etc. on the wall.
3. Coat the base with primer. Paint or varnish with the addition of an appropriate solvent can be used as a primer, or special compounds, intended for priming surfaces.
The base should be:
1. Smooth and free of bumps, sharp breaks and protrusions (roughness and potholes are allowed in small areas).
2. Smooth - only minor curvatures of the base are allowed over a large area.
3. Dry, clean.
4. Well primed.
Attention!
· Do not use cement-based adhesives (Vetonit, Plitonit and others) to attach mirror tiles.
· Also, do not use acidic (acetic) “universal” sealants. The use of these materials may lead to the destruction of the mirror amalgam.
· If difficulties arise with leveling the surface, the tiles can be laid on drywall, smooth slate or plastic, which are pre-attached to the wall or ceiling.
In rooms with sudden changes in temperature and high humidity To avoid peeling and breaking of the tiles, it is recommended to lay the tiles leaving a thermal seam between the elements. Compositions for application. It is best to use any neutral (without vinegar) sealant as glue. It is possible to use the Liquid Nails composition LN-930 Mirrors, but it is inconvenient to work with large volumes because it takes a long time to set, and the laid tiles can “crawl” under their own weight. To prevent the tiles from slipping, it is recommended to use pads made of double-sided tape. For grouting joints, it is recommended to use neutral sealants of any color. The most commonly used sealant is dark gray - it does not create a contrast with the mirror tile itself and has bactericidal and antifungal properties (unlike transparent), which is important for rooms with high humidity. When laying on a neutral sealant, the seams can be grouted within 24 hours. It is advisable to grout tiles laid with mirror adhesives after a couple of days. Using a neutral sealant has another advantage - mirror tiles are glued and grouted with the same compound.
Laying mirror tiles.
1. Calculate the number of tiles in vertical and horizontal rows
2. Mark the base on which the mirror tiles will be applied.
3. Lay out all the mirror tiles on a flat horizontal surface as they will be located after sticking.
4. If you are laying tiles end-to-end - Due to possible incompatibility ( permissible deviations are always present in size) select a place for each tile so that all tiles are in mirror panel lay close to each other.
5. Apply the entire tile to the base.
6. Wipe away any traces of glue or sealant from the mirror surface with a non-metallic spatula. Sealant residues are best removed 2-3 hours after application. To remove particularly stubborn stains, you can use Pemoxol or another fine cleaning agent.
Drilling a hole in mirror tiles is quite difficult. But if you need to display electrical or plumbing wiring on a mirror panel, you can make markings on the glass with a regular felt-tip pen or marker and contact an organization that produces glass drilling and processing or our organization.
For mirror tiles of any format, a 4 mm thick mirror is used. Note that modern ceramic tiles are in any case much thicker (8 mm or more). Therefore, the difference in the thickness of ceramic and mirror tiles is best compensated for by the most common cement-sand mortar, applying it in a suitable layer to the section of the wall where you plan to lay the mirror tiles.
Attention!
· When laying tiles, they must be kept in an upright position, leaning them against any vertical surface. Storing tiles in a stack can scratch the glass on the front of the mirror.
When laying tiles on the ceiling, in addition to gluing, you can use a standard suspended set from conventional suspended ceilings.
Buy several more tiles than you plan to use: - during transportation or application, one or two tiles can be damaged; - it is better to leave a couple of tiles in case of repair.
Date: 2012-07-01 17:30:17
Mirror tiles are a type of ceramic tile. At its core, it is mirror glass, which means you need to work with it accordingly. It is worth noting that laying mirror tiles Doing it yourself differs from installing conventional glazed ceramic tiles. Especially great difficulties arise with cutting this material. To cut regular tiles, use a grinder with a special disc or a tile cutter. However, tile cutters do not allow you to make special cuts in tiles. In this case, the material may simply break.
For complex tile cuts, the most suitable tool is Bulgarian. However, when using it, the edges of the material are knocked off, as a result, the damaged areas are noticeable. Therefore, it is better to combine the advantages of a grinder and a tile cutter, using both of these tools. At laying mirror tiles you will certainly need to cut it with your own hands.
Using a tile cutter, place a flat object under the mirror tile to bring it closer to the knife blade. To perform this operation you will have to get used to it. Until you get the hang of cutting tile, you may need to break a few nail files. Don't be upset - this is a common thing. Mirror tiles are best cut using a glass cutter, while a diamond glass cutter will be the most optimal solution. It will allow you to cut the tiles like regular glass.
Mirror tile laying technology
How to lay mirror tiles? Like regular tiles. First, achieve a completely flat surface and apply tile adhesive or sealant to it. Experts recommend using 25-kilogram bags of this glue. One such bag is enough for approximately 3 square meters coverings.
Tile adhesive is a convenient and effective adhesive mixture that is not affected by fungus, water or frost. Apply this glue to the wall in a layer of 0.5-1 centimeter over the entire size of the tile. After this, the excess solution is removed with a notched trowel, forming a wavy layer of glue. This laying method will give additional strength to the coating, since the wavy layer creates an adhesion effect. Even when the tiles are not completely dry, they will be extremely difficult to remove from the wall.
Install plastic crosses between adjacent elements. The size of the crosses should correspond to the spaces between the tiles. On sale you will find crosses for tiles 0.1-1 centimeter. When choosing them, it is important to take into account the design of the entire room, since the thickness of the seams will immediately catch your eye. If it is too thick, then the mirror image will be broken into separate images, and a seam with very little thickness will make alignment between individual tiles difficult if their walls are very uneven.
Installing mirror tiles is similar to laying ceramic
The procedure for installing mirror tiles is the same as for laying ceramic tiles. However, it is important to remember that we are working with glass, which means that shrinkage of elements rubber mallet should be done more carefully, otherwise you will simply break it. You can grout the seams with regular grout, but when working in the bathroom, both the grout and the glue must be moisture-resistant. You can use one sealant. Its main advantage is that over time it will become rubber and will not allow moisture to pass through to the edges of the coating.
Some people believe that mirror tiles do not resist well enough humid environment and deteriorates over time. But its manufacturers convincingly assure that mirror tiles are resistant to moisture. Yes, and it seems reasonable that the mirror good quality moisture is not a problem.
If you are afraid that mirror tiles will darken over time, then use a natural sealant rather than tile adhesive for its installation. However, in this case, the laying technology will change slightly: the tiles will be glued to the wall. Any unevenness that may occur can be eliminated by adjusting the layer thickness.
To lay mirror tiles with your own hands, first of all, decide on the choice of material.
There are two main options:
- base – polystyrene foam. Paint with metal particles is applied to it, which gives a mirror surface. They are light and cheap. Extremely easy to install - they are mounted on glue. However, they cannot achieve a smooth mirror surface - they produce distortions. Generally appearance pretty average.
- base – glass. The mirror layer is formed by algamum, metal coating, foil, etc. applied to the back side. The quality depends on the strength and properties of this layer, as well as the quality of the glass, which together determine the cost. They require careful preparation of the base and careful handling (the main enemies are chips and darkening of the algama). Stable, durable.
Let's talk about styling glass tiles more details.
Preparing the base for installation
Laying mirror tiles with your own hands is possible on almost any flat, dry, clean surface with sufficient adhesion. Keyword– “flat”, since large differences over the entire surface give a “broken” mirror image and are immediately visible.
The base (walls or ceiling) must be cleaned, treated with an antiseptic and a deep penetration primer, leveled with base plaster, then puttied and polished (irregularities up to 2 mm), dusted, and primed.
If leveling is impossible, the base is covered with a sheet of plasterboard or asbestos. Measure the area of the base, purchase tiles with a reserve (defects, chips during delivery and installation, errors, as well as several pieces that will be spare).
While the base dries, go over the tile itself. Place it on the floor as it will lie on the surface.
Attention: The sizes of the tiles, even within the same batch, can vary within 2 mm (more is defective), so the installation will need to be repeated on the surface exactly.
Advice: the most important thing is the angle at which the eye first falls when entering the room and the direction that is closest to the window. They are performed as carefully as possible.
To lay tiles with your own hands, you will need a glass cutter (diamond is ideal), a glass or metal drill. You can also work with a tile cutter. The rest of the set of tools is similar to the set for laying regular ceramic tiles: level, plumb line, ruler, square, notched trowel, rubber or other non-metallic trowel, masking tape, double tape.
Choosing an adhesive mixture
You cannot glue the mirror with regular tile adhesive because the algamum begins to darken after a while when exposed to an acidic environment. Therefore, glass mirrors are glued only to chemically neutral bases based on silicone (without acid in the composition), epoxy resin, mastics. If there are concerns that the wall or ceiling will become damp, then the tiles can be glued with a sealant.
The adhesive is applied to the wall according to the size of the tile in a layer 0.5 - 1 mm thick, and then leveled with a notched trowel. When gluing to liquid nails, which harden slowly, the tiles are duplicated on the back side with double tape.
Laying mirror tiles with your own hands
Ensuring reliability, smoothness, good adhesion to the base (for this, a thin layer can be applied to the wall cement-sand mixture, coat the back surface of the tile with a thin layer of mastic and sprinkle with sand) proceed to laying the first row. It must be horizontal.
Make gaps using crosses. The narrower they are, the more difficult it is to join the pattern, but the more visually uniform the canvas becomes. Larger gaps (up to 3-4 mm) visually “break up” the reflections, but this is the only way to lay it on a base with uneven surfaces.
Liquid nails dry slowly, so they are not suitable for one-time installation large areas, but when using a more viscous glue, several rows can be laid at a time.
You can sand the cut edges of the tiles with fine sandpaper or a knife sharpening stone.
An alternative to gluing tiles to the ceiling could be:
- typesetting suspended structure, where each tile fits into its own recess, leaving communications above accessible;
- You can also lay mirror tiles by attaching them to drywall or wooden sheathing onto the screws and closing the holes from them with caps.
Complete setting of the glue occurs in 4-5 days.
Grouting can be done with sealant or transparent silicone. It is best to seal the seams with masking tape, and then cut grooves into them, into which the sealant will then lie. Remove dirt with a cloth and non-metallic spatula.
Overall: laying mirror tiles with your own hands requires skill in working with glass, attentiveness, and accuracy. Need perfect level base and adhesives that will not damage the mirror layer. Such an element in the interior immediately attracts attention, and therefore the selection of glass (tinted, chamfered), the size of the tile, and its placement relative to the light sources are also important.
We bring to your attention a short educational film: “Laying mirror tiles using liquid nails and double-sided tape.”