Painter ects directory of working professions. Plasterer; construction painter. What you should know

§ 167a. Painter 1st category

Characteristics of work

Painting parts in adjusted drums, automatic machines using the dipping method and brush without puttying or priming.
Washing parts with alkalis, water and solvents.
Degreasing surfaces.
Drying oil coating and priming.
Grinding paint and varnish materials on hand paint grinders.
Filtration of paints and varnishes.
Drying painted products.
Washing and cleaning of used tools, brushes, stencils, containers, parts of paint sprayers, apparatus airless spray, hoses.
Receiving and tossing on workplace paint and varnish materials.
Hanging parts and products on special devices and removing them after staining.
Preparation of paints, varnishes, mastics, putties, primers, putties according to a given recipe under the guidance of a more highly qualified painter.

Must know:

techniques for painting parts in drums, automatic machines and by dipping;
general information about corrosion, scale, protection wooden surfaces from woodworms and methods of protection against them;
name and types of paints, varnishes, enamels, primers, putties, compositions of putty materials;
service rules drying chambers and cabinets and drying modes for products;
methods of grinding paints by hand;
purpose and conditions of use of painting tools:
compositions and methods for washing and cleaning used instruments and brushes various types, containers and paint sprayers.

Work examples:

1. Fittings, insulators - coating with asphalt varnish.
2. Tanks - coloring.
3. Pitchfork - coloring.
4. Machine parts of simple configuration - painting.
5. Fences, gratings, gates, fences - painting.
6. Wrenches, sockets and special ones, pliers, wire cutters and other tools - painting.
7. Rings and rotor blades - painting.
8. Coamings, casings, decking, a set of hull parts, shaft glasses, pipes, simple foundations - degreasing.
9. Decks - wiping with solar oil.
10. Transformer plates - painting with varnish in a drum.
11. Frames, bearing shields and safety welded structures, iron and steel castings for electric machines - cleaning and priming of surfaces.
12. Different containers - coloring.
13. Old thermal insulation in ship premises - removal.
14. Anchor chains - painted with coal tar varnish using the dipping method.

§ 167b. Painter 2nd category

(Tariff and qualification characteristics are additionally included by Decree of the USSR State Labor Committee of December 18, 1990 N 451)

Characteristics of work

Painting surfaces that do not require high-quality finishing after applying putties and primer layers.
Preparation of products for varnishing with varnish putty and for cutting for designs of various types of wood, stone and marble.
Leveling surfaces with putty and filling defects.
Applying numbers, letters and designs using stencils in one tone.
Spray painting of parts and products.
Cleaning, smoothing, greasing, etching of painted surfaces from corrosion, scale, fouling, old paint coating, dust and other deposits from brushes, scrapers, spatulas and other hand tools, rags, vacuum cleaner, air stream from the compressor.
Preparation and grinding of paints, varnishes, mastics, putties, primers and putties using paint grinding machines according to a given recipe.

Must know:

installation of paint grinding machines;
purpose and conditions of use of mechanisms, devices and tools used in painting works Oh;
methods for performing paint and varnish coatings on parts and products made from various materials;
grinding methods;
grinding materials used for different kinds paints and varnishes and their physical properties;
recipes for making paints, varnishes, mastics, putties, putties;
methods of mixing paints according to a given recipe to obtain the required color and determine the quality of the paints and varnishes used;
rules for storing solvents, paints, varnishes and enamels;
paint drying mode;
features of cleaning surfaces made of reinforced concrete and fiberglass;
rules for preparing surfaces for painting;
requirements for the quality of the surface being cleaned.

Work examples:

1. Walls, floors and other surfaces - cleaning, smoothing, etching.
2. Electrical fittings and parts, reinforced insulators, arresters - priming and painting.
3. Cylinders - coloring.
4. Waveguides and waveguide sections made of brass and copper - continuous puttying, grinding, painting.
5. Radiator and gear bushings - mastic coating
6. Parts of medium and complex configurations and components of machines, ships and equipment - painting.
7. Brackets, sectors, steering gear housings, transformers - painting.
8. Lifebuoys - puttying and painting.
9. Covers, boards, plates - spray painting.
10. Roofs, frames, bogies, brake parts, flooring boards, battery and fire boxes, locomotive and wagon deflectors - painting.
11. Steel structures - cleaning from corrosion.
12. Vessel hull inside and outside - cleaning surfaces.
13. Metal beds - painting.
14. Columns, trusses, crane beams, forms for reinforced concrete products- coloring.
15. Hatches, holds, foundations - filling with cement mortar.
16. Mining machines, equipment and machines - painting after repair, stenciling.
17. Panels, cases, casings - spray painted several times.
18. Tractors, rollers, asphalt mixers - painting of bodies.
19. Pipes various diameters- coloring.
20. Ventilation pipes - insulation with mastic materials.
21. Cabinets, limbs - painting.
22. Tongues and ridges of freight car skins - priming.
23. Electric motors, electric machines, turbogenerators - priming, puttying and painting.
24. Metal mailboxes - cleaning, priming and painting.
25. Boxes and instrument cases - stenciling.

§ 167c. Painter 3rd category

(Tariff and qualification characteristics are additionally included by Decree of the USSR State Labor Committee of December 18, 1990 N 451)

Characteristics of work

Painting surfaces that require high-quality finishing, after applying putties and primer layers with paints and varnishes in several tones, sanding, priming, sanding and polishing them with hand tools.
Cutting surfaces into simple patterns of various types of wood, marble and stone.
Application of drawings and inscriptions using stencils in two or three tones; numbers and letters without stencils.
Painting of parts and surfaces using electrostatic installations and electrostatic paint sprayers.
Surface finishing by spraying.
Surface treatment with corrosion inhibitors.
Regulating the supply of air and paint to spray guns.
Coating of products with bitumen-based varnishes and nitro-varnishes.
Cleaning closed volumes (cylinders, compartments).
Painting and cleaning (scrubbing) of ships at the docks.
Interoperative protection with phosphating primers sheet material and profile rolled products for ship structures, except for drinking, distilled and feed water, medical and technical fat.
Application of paint and varnish coatings at the location of the variable waterline of ships, the finishing of which does not have high requirements.
Making simple stencils.
Making mixtures from oil paints and varnishes, nitro paints, nitro varnishes and synthetic enamels.
Selection of colors according to given samples.
Adjustment of mechanisms and devices used in painting work.

Must know:

principle of operation and methods for adjusting mechanisms and devices used in painting work;
arrangement of electrostatic field installations and electrostatic paint sprayers, rules for their regulation according to the readings of instrumentation;
rules for the protection of sheet material and rolled profiles for ship structures;
methods of painting and varnishing products made from various materials and the process of preparing products for finishing;
the process of cutting surfaces into a simple pattern of various types of wood, marble and stone;
properties of decorative and insulating varnishes and enamels and recipes for their preparation;
methods of making paints various colors and tones;
chemical composition paints and rules for choosing colors;
technical specifications for finishing and drying products.

Work examples:

1. Ceilings - cleaning, smoothing, etching.
2. Walls, floors and other surfaces - simple painting.
3. Passenger cars, except for the ZIL and Chaika types, and buses - applying a primer layer, puttying, sanding, primary and re-painting of the body.
4. Trucks - final painting.
5. Barges - painting.
6. Cast and welded parts for electric machines and apparatus - grinding after puttying and painting.
7. Containers - varnishing of the inner surface.
8. Film and photo camera cassettes - coloring.
9. Welded frames of large-block stations and control panels - painting.
10. Housings, tables and disks of adjustment and testing stands - grinding and enamel painting.
11. Vessel hull inside and outside - painting.
12. Cranes, bridges, power line supports - painting.
13. Freight car bodies, tank and steam locomotive boilers, universal containers - painting.
14. Machines, machines, devices, devices and other equipment - painting.
15. Decks - applying mastics.
16. Metal and wooden panels for radio devices - painting and finishing.
17. Frames, doors, transoms - painting and varnishing.
18. Counting, sewing and writing machines - painting and polishing.
19. Posts, shields - cutting to a simple design of various types of wood.
20. Walls, shelves, furniture outside and inside, ceilings and roofs of locomotives and all-metal cars, cars with machine cooling and isothermal cars with a metal body - grinding, applying a revealing layer with a brush, spray or roller.
21. Reinforced concrete vessels - painting.
22. Trolleybuses and subway cars - sanding over solid putty, applying the second and third layers of enamel with a brush and spray paint.
23. Pipes and metal fittings of locomotives and cars - painting.
24. Ventilation pipes - painting.
25. Cases for electrical equipment - varnishing and polishing.
26. Anchor chains - coloring.
27. Electric motors, electric machines, turbogenerators - final painting.

§ 167g. Painter 4th category

(Tariff and qualification characteristics are additionally included by Decree of the USSR State Labor Committee of December 18, 1990 N 451)

Characteristics of work

Painting surfaces with dry powders, various paints and varnishes in several tones, grinding, varnishing, polishing, puttying, priming and oiling them with power tools.
Trimming and fluting of painted surfaces.
Pulling panels with shading.
Drawings on surfaces using stencils in four or more tones.
Cutting surfaces into complex patterns of various types of wood, marble and stone.
Independent compilation of complex colors.
Restoration of painted surfaces, lincrust, linoleum and other materials.
Paint and varnish coatings for glass and ceramic enamel.
Production of complex stencils and combs for cutting painted surfaces.
Painting after priming surfaces using cold airless spray.
Painting of parts, products, devices in tropical design.
Interoperational protection with phosphating primers of sheet material and rolled profiles for ship tanks of drinking, distilled and feed water, medical and industrial fat.
Mechanized cleaning of ship hulls from corrosion, scale, fouling and old paintwork using shot blasting machines with delivery of work using samples and standards and under water high pressure.
Determining the quality of the paints and varnishes used.
Adjustment of mechanisms used in painting work.

Must know:

device and methods for adjusting mechanisms and devices used in painting work;
methods of performing painting work with a high-quality finish;
the process of cutting surfaces into complex patterns of various types of wood, marble and stone;
features of mechanized cleaning of surfaces and ship hulls from fouling and old paintwork;
technical conditions and requirements for painting and varnishing;
methods for restoring painted surfaces, lincrust, linoleum and other materials.

Work examples:

1. Ceilings - improved finishing, painting.
2. Walls, floors and other surfaces - high-quality finishing, painting.
3. Passenger cars, except for the ZIL and Chaika types, and buses - final painting, finishing and polishing.
4. Boats - painting.
5. Linen surfaces of aircraft cabins - multi-layer coating with varnishes and paints.
6. Walls, shelves, furniture outside and inside, ceilings and roofs of locomotives, all-metal cars, cooled cars and insulated cars with a metal body and ship cabins - painting and varnishing with a brush, spray or roller.
7. Ships, fuselages, aircraft wings and carriage walls - applying distinctive inscriptions and markings.
8. Trolleybuses and metro cars - final painting and finishing.
9. Electrical appliances, large-sized electric machines - painting and polishing.

§ 167d. Painter 5th category

(Tariff and qualification characteristics are additionally included by Decree of the USSR State Labor Committee of December 18, 1990 N 451)

Characteristics of work

Painting surfaces with various paints with varnishing, polishing, ornamental, artistic multi-color and decorative finishing.
Cutting surfaces for valuable wood species.
Painting after priming using cold airless spray.
Padding, anti-corrosion coating, coating with antifouling and antifouling paints, anodic and cathodic protection of ships exposed to sea water, mineral acids and alkalis.
Restoration of artistic inscriptions.

Must know:

methods of performing painting work with artistic and ornamental finishing and the method of cold airless spraying;
the process of cutting surfaces for valuable wood species;
recipe, physicochemical characteristics all kinds of coloring materials and compositions for artistic painting and finishing;
types of complex paintings and fonts;
properties and types of various pigments, solvents, oils, varnishes, silicates, resins and other materials used in painting;
methods for testing varnishes and paints for durability and viscosity;
technical specifications for final finishing products, parts and surfaces;
drying modes for paint and varnish coatings;
requirements for the preparation of surfaces for anti-corrosion, anodic and cathodic protection, protective priming and painting schemes for the underwater part of ships exposed to sea water, mineral acids and alkalis;
methods of restoration of artistic inscriptions.

Work examples:

1. Walls, ceilings and other surfaces - high-quality painting, multi-color and decorative finishing.
2. Passenger cars such as ZIL, "Chaika" - final painting, finishing with varnishes and enamel paints.
3. Coats of arms, ornaments, complex inscriptions - artistic execution based on sketches and drawings.
4. Superstructures of passenger ships - painting.
5. Panels, boards, diagrams - artistic surface finishing.

§ 167e. Painter 6th category

(Tariff and qualification characteristics are additionally included by Decree of the USSR State Labor Committee of December 18, 1990 N 451)

Characteristics of work

Relief, textured and experimental painting and airbrush finishing of products and surfaces with the introduction of new dyes and synthetic materials.
Restoration artistic paintings and drawings.
Decorative varnishing, surface polishing interior spaces.
Painting after priming surfaces using hot airless spraying in installations.
Application of antifouling thermoplastic paints using machines.
Protection of antifouling paints with preservative paints according to a special scheme.
Painting from drawings and sketches by hand and using powder.
Ornamental and volumetric painting.

Must know:

methods of implementation and requirements for the quality of experimental, relief and textured painting and airbrush finishing of products and surfaces;
device and methods for setting up installations for hot airless spraying of paints and varnishes and devices for applying thermoplastic paints;
antifouling paint protection schemes;
methods of restoration of artistic paintings and drawings.

Work examples:

1. Walls, ceilings and other surfaces - relief and texture painting, painting based on drawings and sketches.
2. Ship structures - application of thick-layer coatings.
3. Surfaces interior walls passenger ships, airplanes, carriages - painting based on drawings and sketches by hand.
4. Salons, lobbies, “Lux” cabins of passenger ships, airplanes, carriages and pleasure yachts - artistic decoration, protective coating.
5. Exhibits of exhibition machines, apparatus and instruments - multi-layer and multi-color painting, varnishing, grinding and polishing.

Qualification requirements
Complete general secondary education and vocational education without work experience requirements or complete general secondary education and professional training in production. Advanced training and work experience as a 2nd category painter - at least 1 year.

Knows and applies in practice: principle of operation and methods of adjustment of mechanisms and devices that are used during painting work; the structure of electrostatic field installations and electrostatic paint sprayers, the rules for their regulation according to the readings of instrumentation; rules for the protection of sheet material and rolled profiles for ship structures; methods of painting and varnishing products made from various materials and the process of preparing products for processing; the process of painting surfaces with a simple pattern of various types of wood, marble and stone; properties of decorative and insulating varnishes and enamels, recipes for their production; methods of preparing paints different colors; chemical composition of paints and rules for choosing colors; technical specifications for processing and drying of products.

Characteristics of work, tasks and job responsibilities
Paints surfaces that require high-quality processing, after applying putties and primer layers with paints and varnishes in several tones, sands, primes, oils and polishes them different instruments. Paints surfaces to match simple patterns of various types of wood, marble and stone. Applies drawings and inscriptions using stencils in two to three tones; numbers and letters without stencils. Paints parts and surfaces using electrostatic installations and electrostatic paint sprayers. Treats surfaces by spraying. Treats surfaces with corrosion inhibitors. Regulates the supply of air and paint to the spray guns. Coats products with bitumen-based varnishes and nitro varnishes. Cleans closed volumes (cylinders, compartments). Paints and cleans (scrapes) ships at docks. Performs inter-operational protection with phosphate primers of sheet material and rolled profiles for ship structures, except for tanks of drinking distilled and industrial water, medical and industrial fat. Applies paint and varnish coatings to the variable waterline areas of ships, the processing of which does not require high requirements. Produces simple stencils. Prepares mixtures of oil paints and varnishes, nitro paints, nitro varnishes and synthetic enamels. Selects color according to given samples. Sets up mechanisms and devices that are used during painting work.

Work examples
Trucks - final painting. Passenger cars and buses - applying a primer layer, puttying, sanding, primary and secondary painting of the body. Barges - painting. Cast and welded parts for electric machines and apparatus - grinding after puttying and painting. Electric motors, electric machines, turbogenerators - final painting. Containers - varnishing of the internal surface. Welded cassettes for large-block stations and control panels - painting. Film and camera cassettes - painting. The ship's hull is painted inside and out. Housings, tables and disks of regulatory and test benches are polished and painted with enamel. Cranes, bridges, power line supports - painting. Freight car bodies, tank boilers and locomotive universal containers - painting. Counting, sewing and writing machines - painting and polishing. Anchor chains - painting. Machines, machines, devices, devices and other equipment - painting. Decks - applying mastics. Metal and wooden panels for radio devices - painting and processing. Frames, doors, transoms - painting and varnishing. Ceilings - cleaning, smoothing, etching. Walls, floors and other surfaces - simple painting. Walls, shelves, furniture inside and outside, ceilings and roofs of locomotives and all-metal cars, cooled cars and isometric cars with a metal body - sanding, applying a revealing layer with a brush, spray or roller. Pillars, shields - painted to match a simple pattern of various types of wood. Reinforced concrete vessels - painting. Trolleybuses and subway cars - sanding with solid putty, applying the second and third layers of enamel with a brush and spray paint. Ventilation pipes - painting. Pipes and metal fittings of locomotives and cars - painting. Electrical equipment cases - varnishing and polishing.

Characteristics of the work.

Painting surfaces with dry powders, various paints and varnishes in several tones, grinding, varnishing, polishing, puttying, priming and oiling them with power tools. Trimming and fluting of painted surfaces. Pulling panels with shading. Drawings on surfaces using stencils in four or more tones. Cutting surfaces into complex patterns of various types of wood, marble and stone. Independent compilation of complex colors. Restoration of painted surfaces, lincrust, linoleum and other materials. Paint and varnish coatings for glass and ceramic enamel. Production of complex stencils and combs for cutting painted surfaces. Painting after priming surfaces using cold airless spray. Painting of parts, products, devices in tropical design. Interoperational protection with phosphating primers of sheet material and rolled profiles for ship tanks of drinking, distilled and feed water, medical and industrial fat. Mechanized cleaning of ship hulls from corrosion, scale, fouling and old paintwork using shot blasting machines with delivery of work using samples and standards and high-pressure water. Determining the quality of the paints and varnishes used. Adjustment of mechanisms used in painting work.

What you should know:

device and methods for adjusting mechanisms and devices used in painting work
ways to perform painting jobs with a high-quality finish
the process of cutting surfaces into complex patterns of various types of wood, marble and stone
Features of mechanized cleaning of surfaces and ship hulls from fouling and old paintwork
technical specifications and requirements for painting and varnishing
methods for restoring painted surfaces, lincrust, linoleum and other materials.

Work examples

Ceilings - improved finishing, painting.
Walls, floors and other surfaces - high-quality finishing and painting.
Passenger cars, except ZIL and Chaika types, and buses - final painting, finishing and polishing.
Boats - painting.
The canvas surfaces of aircraft cabins are covered with multi-layer varnishes and paints.
Walls, shelves, furniture outside and inside, ceilings and roofs of locomotives, all-metal cars, cooled cars and insulated cars with a metal body and ship cabins - painting and varnishing by brush, spray or roller.
Ships, fuselages, aircraft wings and carriage walls - applying distinctive inscriptions and markings.
Trolleybuses and metro cars - final painting and finishing.
Electrical appliances, large-sized electric machines - painting and polishing.

Educational and thematic plan

"Painter (for metal)"

4th category

(Profession code 13450)

		Total hours	Including:	Forms of control
		Total hours		Forms of control
I.				Oral survey, test
	Economic course

	General technical course
	Materials Science


	Special course
	Special technology
	Introduction

	Determining the quality of applied paints and varnishes
	How to Perform Painting Jobs with a High Quality Finish
	Technological conditions and requirements for painting and varnishing
	Features of mechanized cleaning of surfaces and housings from fouling and old paintwork

	Specifications for final finishing of the product, parts and surfaces

	Environmental protection
II.	Practical training
	Introductory lesson
	Occupational safety, fire safety and electrical safety
	Training in techniques, operations, types of work performed by a 4th category painter
	Independent performance of work by a 4th category painter

	Consultations
	Qualifying exam			Qualifying exam
	Total:

Painter (for metal) 4th category

Must know:

Design and methods for adjusting mechanisms and devices used in painting work;

Methods of performing painting work with a high-quality finish;

The process of painting (cutting) surfaces to create a complex pattern of various types of wood, marble and stone;

Features of mechanical cleaning of surfaces and housings from fouling and old paintwork;

Technical conditions and requirements for painting and varnishing;

Methods for restoration of painted surfaces;

Should be able to :

Produce high-quality painting of surfaces with various paints and varnishes in several tones and finish surfaces with grinding, varnishing and polishing;

Extend the panels with shading;

Apply a design on the surface using stencils in four or more tones;

Carry out cutting metal surfaces under the complex pattern of various types of wood, marble and stone;

Create complex colors yourself;

Restore painted surfaces;

Make complex stencils and combs for cutting painted surfaces;

Paint after priming surfaces using airless spraying;

Paint parts, products, devices in a tropical design;

Carry out inter-operational protection with primers, sheet and profile materials with phosphating coatings for ship tanks of drinking, distilled and drinking water, medical and technical fat;

Clean ship hulls from corrosion, scale, fouling and old paintwork using shot blasting and abrasive blasting machines, performing work using samples and standards and high-pressure water;

Determine the quality of the paints and varnishes used;

Adjust the mechanisms used in painting work;

Be able to apply a paint coating of a given thickness (µm) using painting machines;

Examples of work for the 4th category

1. Passenger cars, buses - final painting, finishing and polishing.

2.Waterlines and marks, recesses - painting with synthetic and oil paints.

3. Parts for export and exhibition exhibits - painting according to 1st finishing class.

4. Special marine products painted in 1st finishing class.

5.Boats-painting.

6. Housings, base brackets, cast parts of complex configuration - painted in class 2 finish.

7. Bearing housings for export - painting according to 1-2 finishing class.

8. Instrument and block housings, covers, panels, front frames, brackets, antennas - painting according to finishing class 1-2, external decorative painting.

9. Vessel hull, ship structures and surfaces of ship premises (compartments, tanks, tanks) - priming and painting by air and airless spraying of paints and varnishes.

10. Fairings - painting.

11. Floors in residential and service areas of ships - painting.

12. Surfaces of structures - applying mastic, putty.

13.Metal surfaces are closed, close and hard to reach places(shafts, compartments, tanks) - priming and painting with polyurethane and epoxy paints.

14. The canvas surfaces of aircraft cabins are multi-layered with varnishes and paints.

15.Paint and varnish coatings - special parameters.

16. Residential and service premises - leveling deck surfaces with mastics and putties. Stators and rotors - painting of internal and external diameters, windings with electrical insulating enamels and varnishes.

17.Walls, shelves, roofs of locomotives, all-metal cars, cars with machine cooling, isothermal cars with a metal body and cabins of ships - painting and varnishing with a brush, spray or roller.

18. Ships, fuselages, aircraft wings and walls of tourist and service cars - applying distinctive inscriptions and markings.

19. Trolleybuses and metro cars - final painting and finishing.

20. Drinking tanks - painting.

21.Electrical appliances, large-sized electric machines - painting and polishing.

Educational and thematic plan

professional development programs for workers

"Painter (for metal)"

5th category

(Profession code 13450)

	Name of sections, disciplines and topics	Total hours	Including:		Forms of control
	Name of sections, disciplines and topics	Total hours		practical, laboratory, seminars	Forms of control
I.	Theoretical training in the profession				Oral survey, test
	Economic course
	Economics of enterprise and industry
	General technical course
	Materials Science
	Recipe, physical and chemical properties of coloring materials
	Test methods for varnishes and paints for durability and viscosity
	Special course
	Special technology
	Introduction
	Industrial sanitation and occupational hygiene of workers
	Painting production technology
	Painting after priming using cold airless spray
	Priming, anti-corrosion coating, anodic and cathodic protection of ships

	Labor protection, fire safety and electrical safety
	Environmental protection
II.	Practical training				Keeping a diary of industrial training, testing, quality control of work performed
	Introductory lesson
	Occupational safety, fire safety and electrical safety
	Training in techniques, operations, types of work performed by a 5th category painter
	Self-execution complex work 5th category painter
	Final practical qualification work
	Consultations
	Qualifying exam				Qualifying exam
	Total:

Tariff and qualification characteristics

Painter (for metal) 5th category

Must know:

Methods of performing painting work with artistic and ornamental finishing and airless spraying;

The process of painting surfaces to resemble valuable wood species;

Recipe, physical and chemical properties of coloring materials and compositions for artistic painting and finishing;

Properties and types of pigments, solvents, solvent oils, oils, resins and other materials used in painting;

Methods for testing varnishes and paints for durability and viscosity;

Technical conditions for the final casting of products, parts and surfaces;

Drying modes for paint and varnish coatings;

Requirements for preparing surfaces for anti-corrosion protection;

Protective schemes for priming and painting the underwater part of ships exposed to sea water, mineral acids and alkalis;

Methods for restoring artistic inscriptions;

Rules for occupational safety, industrial sanitation and fire safety.

Should be able to :

Perform high-quality painting of surfaces, solid, lattice, large-sized metal structures with various paints with varnishing, polishing, ornamental and artistic multi-color finishing;

Paint surfaces to resemble valuable wood species;

Carry out high-quality painting after priming using airless spray;

Perform priming, anti-corrosion coating, coating with anti-fouling and anti-fouling paints;

Paint vessels exposed to sea water, mineral acids and alkalis;

Restore artistic inscriptions;

Comply with labor safety rules, industrial sanitation, fire safety and electrical safety rules.

Examples of work for the 5th category

1. Passenger cars, final painting, finishing with varnishes and enamel paints.

2. Coats of arms, ornaments, complex inscriptions - artistic execution based on sketches and drawings.

3. Instrument housings for export - painted according to the 1st finishing class.

4. Instrument housings operated in sea water, in tropical conditions- coloring.

5. Vessel hull, ship structures and surfaces of ship premises (compartments, tanks, tanks, holds) - priming and painting by hot air and airless spraying of paints and varnishes.

6. Vessel hull and other metal structures in the underwater part - measurements of the specific transverse resistance of the paint and varnish coating with preliminary marking of measurement points.

7. Superstructure of passenger ships - painting.

8.Panels, boards, diagrams - artistic surface finishing.

9. Salons of ships, passenger aircraft, tourist and service passenger cars - finishing of metal, wood, plastic;

10.Facade parts of bridge structures - painting.

ETKS works and professions of workers Issue 1

(approved by the resolution of the State Committee for Labor of the USSR, the secretariat of the All-Union Central Council of Trade Unionsdated January 31, 1985 N 31/3-30) (as amended on October 12, 1987, December 18, 1989, May 15, June 22, December 18, 1990, December 24, 1992, February 11, July 19, 1993 , June 29, 1995, June 1, 1998, May 17, 2001, July 31, 2007, October 20, 2008, April 17, 2009)

Educational and thematic plan

professional development programs for workers

"Painter (for metal)"

6th category

(Profession code 13450)

	Name of sections, disciplines and topics	Total hours	Including:		Forms of control
	Name of sections, disciplines and topics	Total hours		practical, laboratory, seminars	Forms of control
I.	Theoretical training in the profession				Oral survey, test
	Economic course
	Economics of enterprise and industry
	General technical course
	Materials Science
	Physico-chemical properties of antifouling thermoplastic paints
	Antifouling paint protection schemes
	Special course
	Special technology
	Introduction
	Industrial sanitation and occupational hygiene of workers
	Painting production technology
	Device and methods for setting up installations for hot airless spraying
	Technology for applying antifouling thermoplastic paints using devices
	Specifications for final finishing of products, parts and surfaces
	Labor protection, fire safety and electrical safety
	Environmental protection
II.	Practical training				Keeping a diary of industrial training, testing, quality control of work performed
	Introductory lesson.
	Occupational safety, fire safety and electrical safety
	Training in techniques, operations, types of work performed by a 6th grade painter
	Independent performance of particularly complex work by a 6th category painter
	Final practical qualification work
	Consultations
	Qualifying exam				Qualifying exam
	Total:

Tariff and qualification characteristics

Painter (for metal) 6th category

Must know :

Methods of implementation and requirements for the quality of experimental painting and finishing of products and surfaces;

Device and methods for setting up installations for airless spraying of paints and varnishes and devices for applying thermoplastic paints;

Antifouling paint protection schemes;

Methods of restoration of artistic paintings and drawings;

Rules for occupational safety, industrial sanitation and fire safety.

Should be able to:

Perform experimental painting and finishing of products and surfaces when introducing new dyes and synthetic materials;

Restore artistic paintings and drawings;

Carry out decorative varnishing and polishing of interior surfaces;

Paint after priming surfaces using hot airless spraying on installations;

Apply antifouling thermoplastic paints using machines;

Protect antifouling paints with preservative paints according to a special scheme;

Paint according to drawings and sketches by hand;

Comply with labor safety rules, industrial sanitation, fire safety and electrical safety rules.

Examples of work for the 6th category

1. Ship structures - application of thick-layer coatings.

2. The surfaces of the internal walls of passenger ships, airplanes, carriages - painted according to drawings and sketches by hand.

3. Salons, lobbies, “Lux” cabins of passenger ships, airplanes, carriages and pleasure yachts - artistic decoration, protective coating.

4. Exhibits of exhibition machines, apparatus and instruments - multi-layer and multi-color painting, varnishing, grinding and polishing.

5. Tanks (containers) for distilled and drinking water, medical and technical fat (oil).

ETKS works and professions of workers Issue 1

§ 41. Painter 1st category

Characteristics of work. Painting parts in set up drums, automatic machines, by dipping and brushing without putty or primer. Cleaning painted surfaces from scale, corrosion, paintwork, dust and other deposits manually using brushes and scrapers. Washing parts with alkalis, water and solvents. Preparing surfaces for painting. Degreasing surfaces, coating with drying oil and priming. Grinding paint and varnish materials using hand paint grinders. Filtration of paints and varnishes. Cooking and preparing glue. Drying painted products. Washing and cleaning of used tools, brushes, stencils, containers, parts of paint sprayers, airless sprayers, hoses. Receiving and delivering paint and varnish materials to the workplace. Hanging parts and products on special devices and removing them after painting. Preparation of paints, varnishes, mastics, putties, primers and putties under the guidance of a more highly qualified painter.

Must know: techniques for painting parts in drums, automatic machines and by dipping; rules for preparing surfaces for painting; requirements for the surface to be cleaned; about corrosion, scale, protection of wooden surfaces from woodworms and methods of protection against them; name and types of paints, varnishes, enamels, primers, putties, compositions of putty materials; rules for servicing drying chambers and cabinets and drying modes for products; methods of grinding paints by hand; purpose and conditions of use of painting tools; compositions and methods for washing and cleaning used tools, brushes of various types, containers and paint sprayers.

Work examples

1. Fittings, insulators - coated with asphalt varnish.

2. Tanks - coloring.

3. Tags made of solid materials - degreasing, applying a primer layer.

4. Workbenches, racks, cabinets for tools - applying a primer layer.

5. Pitchfork - coloring.

6. Machine parts of simple configuration - painting.

7. Simple configuration parts (plugs, brackets, boards, strips, etc.), frames, casings - cleaning, degreasing, applying a primer layer.

8. Ship parts (shelves, brackets, etc.) and mechanisms - cleaning from contamination, washing before priming, degreasing.

9. Cast parts, brackets, housings, bases - degreasing, applying a primer layer.

10. Fences, gratings, gates, fences - painting.

11. Electrical insulating frames (coils) - cleaning, degreasing, applying a primer layer.

12. Wrenches, sockets and special ones, pliers, wire cutters and other tools - painting.

13. Rings and rotor blades - painting.

14. Coamings, casings, decking, a set of hull parts, shaft glasses, pipes, foundations - degreasing.

15. Metal and wooden structures - cleaning, degreasing, applying a primer layer.

16. Steel structures - cleaning from corrosion and oil stains.

17. Mechanism housings, partitions, bulkheads, brackets, brackets, etc. - cleaning from corrosion, scale and old paintwork.

18. Vessel hull, superstructures, bulkheads, partitions, hull plates, outside sides - degreasing.

19. Vessel hull - cleaning of fuel oil during docking.

20. Covers and terminal boxes of electric motors - priming.

21. Packaging materials - impregnation with drying oil.

22. Decks - wiping with diesel oil.

23. Transformer plates - painting with varnish in a drum.

24. Frames, bearing shields and safety welded structures, iron and steel castings for electric machines - surface cleaning and priming.

25. Different containers - coloring.

26. Old thermal insulation in ship premises - removal.

27. Plywood, slats, decking and other products - coating with drying oil.

28. Anchor chains - painted with coal tar varnish using the dipping method.

29. Shields, bearing caps, fan guides and electric motor casings - priming and painting.

30. Protective screens - cleaning, degreasing, applying a primer layer.

31. Instrument boxes (metallic and non-metallic) packaging - cleaning, degreasing, applying a primer layer.

§ 42. Painter 2nd category

Characteristics of work. Painting surfaces that do not require high-quality finishing, after applying putties, primer layers and sanding them using various sanding materials. Preparation of products for varnishing with varnish putty and for cutting for designs of various types of wood, stone and marble. Leveling surfaces with putty and filling defects. Applying numbers, letters and designs using stencils in one tone. Spray painting of parts and products. Dry and wet sanding of wooden surfaces after puttying. Cleaning painted surfaces from corrosion, scale, fouling and old paintwork using hand-held power tools and portable shot blasting guns. Preparation and grinding of paints, varnishes, mastics, putties, primers and putties using paint grinding machines according to a given recipe.

Must know: installation of paint grinding machines; purpose and conditions of use of mechanisms, devices and tools used in painting work; methods for performing paint and varnish coatings on parts and products made from various materials; grinding methods; grinding materials used for various types of paints and varnishes, and their physical properties; recipes for the preparation of paints, varnishes, mastics, putties and putties; methods of mixing paints according to a given recipe to obtain the required color and determine the quality of the paints and varnishes used; rules for storing solvents, paints, varnishes and enamels; paint drying mode; Features of cleaning surfaces made of reinforced concrete and fiberglass.

2. Electrical fittings and parts, reinforced insulators, arresters - priming and painting.

3. Ballast - surface preparation and painting.

4. Cylinders - coloring.

5. Blocks of pumps, injectors - priming of external surfaces.

6. Block sections, cylinders, inside sides, foundations, tanks, compartments, closed volumes - degreasing.

7. Sides, bulkheads, bottoms, decks, sections - priming.

8. Rotor shaft - priming and painting the outer and inner surfaces.

9. Vibrators, vibration converters, emitters - cleaning, degreasing, priming.

10. Waveguides and waveguide sections made of brass and copper - complete puttying, grinding and painting.

11. Lateral and thrust steel bushings - priming and painting of external and internal surfaces.

12. Bushings, radiator and reduction gears - mastic coating.

13. Parts and components of machines, ships and equipment - priming and painting.

14. Clamps, locks, fasteners, assembled steel plugs - priming and painting of external surfaces.

15. Safety valves, oil valves, blade seat covers, filter covers, frames, brackets - painting of internal surfaces.

16. Equalization manifolds, steel casings - priming of external surfaces.

17. Housings of air conditioners, filters, external bearings, blade housings, steel ejectors - priming, painting.

18. Metal and non-metallic instrument housings - cleaning, degreasing, priming, puttying, painting.

19. Brackets, sectors, steering gear housings, transformers - painting.

20. Lifebuoys - puttying and painting.

21. Steel thrust bearing caps - priming and painting of external surfaces.

22. Covers, boards, plates - spray painted.

23. Oil seal covers, oil seals, brackets - cleaning, degreasing, priming.

24. Roofs, frames, bogies, brake parts, flooring boards, battery and fire boxes, locomotive and wagon deflectors - painting.

25. Hulls of metal vessels for auxiliary purposes - painting.

26. Wooden, reinforced concrete and fiberglass ship hulls that do not require high-quality finishing - cleaning of surfaces.

27. Metal beds - painting.

28. Columns, trusses, crane beams, forms for reinforced concrete products - painting.

29. Winches - priming and painting of external surfaces.

30. Magnetic core sheets - coated with electrical insulating varnishes and adhesives.

31. Frontal parts of stators and rotors, asynchronous machines and windings of the magnetic system of synchronous electric machines - painting.

32. Hatches, holds, foundations - filling with cement mortar.

33. Oil coolers - priming and painting the outer surface.

34. Steel and cast iron flywheels, clamps, shanks - priming and painting of surfaces.

35. Mining machines, equipment and machine tools - painting after repair, stenciling.

36. Floorings, brackets, casings, superstructures, bulkheads, brackets, light partitions - cleaning from rust.

37. Supports, rim assemblies and stops - priming and painting of external surfaces.

38. Equipment (scaffolding, columns, beds) - rust removal, priming.

39. Panels, cases, casings - spray painted several times.

40. Plexiglas slats - painting according to 3 - 4 finishing classes.

41. Converters, hydraulic boosters - degreasing, priming and painting manually and mechanically.

42. Brackets, housings, strips, frames, casings, cast parts of simple configuration - insulation of threaded and mounting holes, grinding after priming, mechanical painting in class 3 finishing.

43. Glasses, bushings, oil seals, housings, casings, frames, brackets - local puttying, grinding, painting.

44. Tractors, rollers, asphalt mixers - painting of bodies.

45. Pipes - covering with fabric, puttying.

46. Pipes different diameters- coloring.

47. Ventilation pipes - insulation with mastic materials.

48. Steel rods - priming and painting of external surfaces.

49. Filters - degreasing, priming, puttying, painting manually and mechanically.

50. Water and oil filters - priming the outer surfaces of AG-100 with aluminum powder.

51. Mounting tires - painting.

52. Tires, busbars - puttying.

53. Plexiglass scales - insulation and coloring.

54. Scales, dials - coloring.

55. Boats - puttying and painting.

56. Tongues and ridges of freight car skins - priming.

57. Pins assembled with a chain, washers, spindles assembled, dowels with a chain assembled - priming of external and internal surfaces and painting.

58. Expansit, foam plastic and other materials - puttying, grinding and priming.

59. Electric motors, turbogenerators - priming, puttying, painting.

60. Metal mailboxes - cleaning, priming and painting.

61. Boxes and instrument cases - stenciling.

§ 43. Painter 3rd category

Characteristics of work. Painting surfaces that require high-quality finishing, after applying putties and primer layers with paints and varnishes in several tones, sanding and polishing them. Cutting surfaces into simple patterns of various types of wood, marble and stone. Application of drawings and inscriptions using stencils in two or three tones; numbers and letters without stencils. Painting of parts and surfaces using electrostatic installations and electrostatic paint sprayers. Surface finishing by spraying. Surface treatment with corrosion inhibitors. Regulating the supply of air and paint to spray guns. Coating of products with bitumen-based varnishes and nitro-varnishes. Manual cleaning of closed volumes (cylinders, compartments). Painting and cleaning (scrubbing) of ships at the docks. Interoperable protection with phosphating primers of sheet material and rolled profiles for ship structures, except for tanks of drinking, distilled and feed water, medical and industrial fat. Application of paint and varnish coatings at the location of the variable waterline of ships, the finishing of which does not have high requirements. Making simple stencils. Cooking adhesives according to a given recipe. Preparation of mixtures of oil paints and varnishes, nitro paints, nitro varnishes and synthetic enamels. Selection of colors according to given samples. Changing and gluing linoleum, relin and other materials. Adjustment of mechanisms and devices used in painting work.

Must know: principle of operation and methods for adjusting mechanisms and devices used in painting work; arrangement of electrostatic field installations and electrostatic paint sprayers, rules for their regulation according to the readings of instrumentation; rules for the protection of sheet material and rolled profiles for ship structures; methods of painting and varnishing products made from various materials and the process of preparing products for finishing; the process of cutting surfaces into a simple pattern of various types of wood, marble and stone; properties of decorative and insulating varnishes and enamels and recipes for their preparation; methods of composing paints of various colors and tones; chemical composition of paints and rules for selecting colors; methods and methods of gluing, changing linoleum, linkrust and other materials; technical specifications for finishing and drying of products.

Work examples

1. Passenger cars, except for the ZIL and Chaika brands, and buses - applying a primer layer, puttying, sanding, primary and re-painting of the body.

2. Trucks - final painting.

3. Ship fittings and equipment - painting according to class 2 finishing.

4. Barges - painting.

5. Control units - priming and puttying of external surfaces.

6. Block sections, complex foundations, internal sides - mechanized rust removal.

7. Doors, frames - putty.

8. Wing propellers - priming and painting.

9. Cast and welded parts for electric machines and apparatus - grinding after puttying and painting.

10. Containers - varnishing of the inner surface.

11. ZS-T contactors - painting of the outer surface.

12. Film and photo camera cassettes - coloring.

13. Welded frames of large-block stations and control panels - painting.

14. Upper and lower propeller housings - priming and painting of external and internal surfaces.

15. Steel gearbox housings and covers - priming and painting of internal surfaces.

16. Housings, tables and disks of adjustment and testing stands - grinding and enamel painting.

17. Vessel hull inside and outside, superstructures - painting.

18. Turbine casings - priming, puttying and painting of external and internal surfaces.

19. Housings of electrical distribution devices - puttying, priming, painting.

20. Cranes, bridges, power line supports - painting.

21. Freight car bodies, tank and steam locomotive boilers, universal containers - painting.

22. Steel oil pipelines - painting of internal surfaces.

23. Machines, machines, devices, instruments and other equipment - painting.

24. Ship mechanisms, devices - puttying, painting by hand and mechanized.

25. Flexible steel supports - priming and puttying of external surfaces.

26. Decks - applying mastics.

27. Metal and wooden panels for radio devices - painting and finishing.

28. Switches "S" PS-1 steel - priming of the outer surface and painting.

29. Facing and shaped tiles - cladding of vertical surfaces.

30. Surfaces of ships, carriages - gluing linoleum, linkrust, relin.

31. Surfaces of ship premises, panels, layouts - sanding with putty and primer, painting with enamels and varnishes.

32. Surfaces of structures and products - painting with installations of the URTs-1 type.

33. Surfaces of structures - applying Adem mastic manually.

34. Ship surfaces: metal, wood, insulation in enclosed spaces, ship hull from the outside using rubber and fiberglass, complex foundations, shafts, rudders - manual and mechanical painting.

35. “VARNISH” coating - gluing and removing stencils.

36. Frames, doors, transoms - painting and varnishing.

37. Welded steel rotors - priming and painting of internal surfaces.

38. Glasses, bushings, oil seals, small-sized brackets, housings, casings, frames - complete puttying, grinding, painting in 2nd and 3rd class finishes.

39. Counting, sewing and writing machines - painting and polishing.

40. Posts, shields - cutting to a simple design of various types of wood.

41. Walls, shelves, furniture outside and inside, ceilings and roofs of locomotives and all-metal cars, cars with machine cooling and isothermal cars with a metal body - grinding, applying a revealing layer with a brush, spray or roller.

42. Reinforced concrete vessels - painting.

43. Trolleybuses and subway cars - gluing panels and ceilings, interior with cotton fabric, gluing panels with linkcrust, sanding over solid putty, applying second and third layers of enamel with a brush and spray paint.

44. Pipes and metal fittings of locomotives and cars - painting.

45. Ventilation pipes - painting.

46. Cargo holds - painting glass fabric with EP type enamels.

47. Steel rods - priming and painting of external surfaces.

48. UPK with devices - priming and painting of the outer surface.

49. Cases for electrical equipment - varnishing and polishing.

50. Anchor chains - coloring.

51. Tanks, compartments, closed volumes - cleaning from rust and loose scale by hand, priming and painting.

52. Metal scales - knurled with a roller, engraved in several colors.

53. Electric motors, turbogenerators - final painting.

54. Drawers and cabinets, metal panels stations and control panels - sanding, painting and finishing.

§ 44. Painter 4th category

Characteristics of work. High-quality painting of surfaces with dry powders, various paints and varnishes in several tones and finishing of surfaces with grinding, varnishing and polishing. Trimming and flanging of painted surfaces. Pulling panels with shading. Drawings on surfaces using stencils in four or more tones. Cutting surfaces into complex patterns of various types of wood, marble and stone. Independent compilation of complex colors. Restoration of painted surfaces, lincrust, linoleum and other materials. Paint and varnish coatings for glass and ceramic enamel. Production of complex stencils and combs for cutting painted surfaces. Gluing carpet linoleum, pavinol and other materials. Painting after priming surfaces using cold airless spray. Painting of parts, products, devices in tropical design. Interoperational protection with phosphating primers of sheet material and rolled profiles for ship tanks of drinking, distilled and feed water, medical and industrial fat. Mechanized cleaning of ship hulls from corrosion, scale, fouling and old paintwork using shot blasting machines with delivery of work using samples and standards and high-pressure water. Determining the quality of the paints and varnishes used. Adjustment of mechanisms used in painting work.

Must know: device and methods for adjusting mechanisms and devices used in painting work; methods of performing painting work with a high-quality finish; the process of cutting surfaces into complex patterns of various types of wood, marble and stone; features of mechanized cleaning of surfaces and bodies from fouling and old paintwork; technical conditions and requirements for painting and varnishing; methods for restoring painted surfaces, lincrust, linoleum and other materials.

Work examples

1. Passenger cars, except for the ZIL and Chaika brands, and buses - final painting, finishing and polishing.

2. Waterlines and recess marks - painting with synthetic and oil paints.

3. Parts for export and exhibition exhibits - painting according to 1st finishing class.

4. Special ship products (3s-95, UPV) - painting according to 1st finishing class.

5. Boats - painting.

6. Cases, base brackets, cast parts of complex configuration - painted in class 2 finish.

7. Bearing housings for export - painting according to 1st - 2nd finishing class.

8. Housings of devices and units, covers, panels, front frames, brackets, antennas - painting according to 1 - 2 finishing class, external decorative painting.

9. Ship hull, ship structures and surfaces of ship premises (compartments, tanks, tanks) - priming and painting by cold air and airless spraying of paints and varnishes.

10. Fairings - painting.

11. Decks in residential and service areas of ships - linoleum, relin, egelite flooring.

12. Surfaces of structures - application of Adem mastic using a Plast apparatus.

13. Surfaces of metal closed, cramped and hard-to-reach places (shafts, compartments, tanks) - priming and painting with epoxy paints.

14. Linen surfaces of aircraft cabins - multi-layer coating with varnishes and paints.

15. “VARNISH” coating - measurement of special parameters.

16. Residential and service premises - leveling deck surfaces with mastics for gluing linoleum.

17. Stators and rotors - coating of internal and external diameters, windings with electrical insulating enamels and varnishes.

18. Walls, shelves, furniture outside and inside, ceilings and roofs of locomotives, all-metal cars, cooled cars, insulated cars with a metal body and ship cabins - painting and varnishing with a brush, spray or roller.

19. Ships, fuselages, aircraft wings and walls of tourist and service cars - applying distinctive inscriptions and markings.

20. Trolleybuses and subway cars - final painting and finishing.

21. Drinking tanks - painting.

22. Electrical appliances, large-sized electric machines - painting and polishing.

§ 45. Painter 5th category

Characteristics of work. High-quality painting of surfaces with various paints with varnishing, polishing, ornamental and artistic multi-color finishing. Cutting surfaces for valuable wood species. High-quality painting after priming using cold airless spray. Priming, anti-corrosion coating, coating with anti-fouling and anti-fouling paints, anodic and cathodic protection of ships exposed to sea water, mineral acids and alkalis. Restoration of artistic inscriptions.

Must know: methods of performing painting work with artistic and ornamental finishing and the method of cold airless spraying; the process of cutting surfaces for valuable wood species; recipe, physical and chemical properties of coloring materials and compositions for artistic painting and finishing; types of complex paintings and fonts; properties and types of pigments, solvents, oils, varnishes, silicates, resins and other materials used in painting; methods for testing varnishes and paints for durability and viscosity; technical specifications for the final finishing of products, parts and surfaces; drying modes for paint and varnish coatings; requirements for the preparation of surfaces for anti-corrosion, anodic and cathodic protection; protective schemes for priming and painting the underwater part of ships exposed to sea water, mineral acids and alkalis; methods of restoration of artistic inscriptions.

Work examples

1. Passenger cars of the ZIL and Chaika brands - final painting, finishing with varnishes and enamel paints.

2. Coats of arms, ornaments, complex inscriptions - artistic execution based on sketches and drawings.

3. Instrument housings for export - painting according to 1st finishing class.

4. Instrument housings used in sea water, in tropical conditions - painting.

5. Ship hull, ship structures and surfaces of ship premises (compartments, tanks, tanks) - priming and painting by hot air and airless spraying of paints and varnishes.

6. Ship hull and other metal structures in the underwater part - measurements of the specific transverse resistance of the paint coating with preliminary marking of measurement points.

7. Superstructure of passenger ships - painting.

8. Panels, boards, diagrams - artistic surface finishing.

9. Interiors of ships, passenger aircraft, tourist and service passenger cars - finishing in metal, wood, plastic.

§ 46. Painter 6th category

Characteristics of work. Experimental painting and finishing of products and surfaces when introducing new dyes and synthetic materials. Restoration of artistic paintings and drawings. Decorative varnishing, polishing of interior surfaces. Painting after priming surfaces using hot airless spraying in installations. Application of antifouling thermoplastic paints using machines. Protection of antifouling paints with preservative paints according to a special scheme. Painting from drawings and sketches by hand.

Must know: methods of implementation and requirements for experimental painting and finishing of products and surfaces; device and methods for setting up installations for hot airless spraying of paints and varnishes and devices for applying thermoplastic paints; antifouling paint protection schemes; methods of restoration of artistic paintings and drawings.

Work examples

1. Ship structures - application of thick-layer coatings.

2. The surfaces of the internal walls of passenger ships, airplanes, tourist and service cars - painting based on drawings and sketches by hand.

3. Salons, lobbies, “Lux” cabins of passenger ships, airplanes, carriages and pleasure yachts - artistic decoration, protective coating.

4. Exhibits of machines, apparatus and instruments - multi-layer and multi-color painting, varnishing, grinding and polishing.