Specially designed electric traps designed to kill flying insects are a special lamp that emits soft ultraviolet light. This lamp, thanks to its radiation, is capable of attracting a variety of insects, for example, moths, mosquitoes, flies, and so on. The moment an insect flies up to the ultraviolet lamp, it lands on a special grid made of metal. An electric current that is lethal to small insects passes through this grille.
At that moment, when an insect, trying to fly as close as possible to the lamp, hits the metal mesh, it immediately dies from the resulting current discharge. These electric traps are also called electroshock insect killers.
Trap for killing insects (insecticidal lamp)
Summer time is the most suitable period for vacations, outdoor recreation, and development own business. After all, most restaurants, shops, summer cafes, as well as beaches are equipped with special gazebos on outdoors, which allow visitors to spend time in nature.
However, in the summer season, despite great amount There are advantages, but there is also one big disadvantage - these are annoying and sometimes dangerous insects, which can act as carriers of a wide variety of infections, as well as causative agents of dangerous diseases. To protect your family, loved ones, yourself, and your business from insects, you need to take all necessary precautions. To get rid of unwanted flying insects, such as midges, mosquitoes, wasps, flies, it is recommended to use modern models electrotraps.
How do electric insect traps work?
Insect traps are equipped with a special ultraviolet lamp. This lamp, during its operation, emits soft ultraviolet light, which causes absolutely no harm to either people or animals. This ultraviolet light actively attracts a variety of insects. The lamp emitting ultraviolet light is surrounded by a special metal mesh through which voltage passes.
Electric insect traps are equipped with a special transformer. Thanks to it, the voltage level that flows through metal mesh, can reach from 1.1 to 4 kW. It is worth noting that the voltage indicators that are connected to the grid depend on the selected model. Simply put, on some models the grid voltage indicator is the same, while on others it may be slightly more or less (depending on the installed transformer).
A voltage of 1.1-4 kW will be quite enough to kill insects. Traps can be equipped different amounts lamps (from 1 to 3 pieces), depending on their size indicators. In addition, the traps are equipped with a special removable bottom. Thanks to this design, it is very convenient to clean them from already dead insects (it is necessary to clean the trap as it becomes clogged). Electric traps are additionally equipped with a metal chain or a special loop, which allows you to attach it to a work surface (for example, on a porch, gazebo). To operate the device, you must be connected to a 220 Volt network.
Where are they used and what are the advantages of insect traps?
Electric insect traps ( insecticidal lamps), can be used in domestic, warehouse, industrial, and food premises. In addition, such devices can be used without fear in stores, supermarket sales areas, restaurants, hotels, and utility rooms. Quite often they are used to catch and destroy insects in production workshops and factories.
Insect traps have a number of very diverse advantages (compared to a variety of chemicals, aerosols, plates, etc.). The advantages of these devices include:
1. Simplicity during operation.
2. They have no odors.
3. During operation, they do not emit harmful or toxic substances.
4. Safe for humans and animals.
5. Can be used indoors different types(closed and open).
To ensure effective operation of the device, you need to choose the right electric insect trap, taking into account the area of its operation. It should be noted that the installation location, as well as the level of ambient lighting, can influence the area of influence of this device.
Today, an electric insect trap is quite capable of protecting fifty or more square meters any area for open air- be it a veranda, gazebo, recreation center, cafe, restaurant, cottage or Vacation home. However, it is not forbidden to use the device to get rid of mosquitoes or flies in closed areas or indoors.
A functional electronic insect trap will save you from annoying mosquitoes, gnats, flies, moths or midges.
How does an electric mosquito trap work?
The need to buy such an insect killer should not cause any concerns. First of all, because no chemicals or other harmful substances the devices are not used in operation. Accordingly, an electric mosquito trap is not at all dangerous to humans.
The only rule that must be followed when operating the device is that electronic mosquito traps must be reliably protected from rain when located outdoors in the open air.
How does a fly trap trap attract annoying mosquitoes and flies? The device uses three integrated methods:
- Firstly, ultraviolet lamps are placed here;
- Secondly, the device accurately simulates the breathing process of a mammal - working lamps, when heated, emit a little carbon dioxide. Accordingly, the midge trap is mistaken by insects for a person or animal;
- In addition, an electric fly trap produces heat, which is interpreted by insects as a signal of the presence of a warm-blooded organism.
Installing the device is very simple, and to get started you just need to plug the plug into the outlet
Advantages of such devices
The advantages of such devices are reliability, ergonomics and efficiency. To be more effective, you can place insect traps on trees, but this is not at all necessary. Using the included mount, the trap can be placed on a wall or any other place.
The main advantage of a fly trap is its absolute safety for humans. Indeed, the operation of the device is based on the use of electric current: insects see electric lamps and try to get to them. They have to fly through the net, and a weak electric current is applied to it. Its power is very low - it is enough for insects, but for a person such a current is absolutely not dangerous, even if direct contact occurs.
The device is manufactured in compliance with all technological requirements. This is confirmed by the existing certificates of conformity. Unique foreign components and special materials indicate the high quality of the product. In particular, aluminum coating and very durable heat-resistant plastic are used for the trap body. For ease of use, there is also a removable container for insects.
Insects are only seemingly harmless little bugs. Sometimes they can greatly annoy a person: crawl into food, itch above the ear, preventing you from falling asleep, and also bite and spread infection. Several decades ago, to combat them, all that was available was a fly swatter and a bottle of Dichlorvos, which was by no means harmless to human health, but these days there are much more reliable means.
Electric traps differ in their design and principle of catching insects, in size, and in the presence of a shutdown temperature control, but what they all have in common is that they all work or are recharged from the electrical network. There are electric traps for getting rid of mosquitoes and flying insects, cockroaches, garden pests and even from rodents. According to customer reviews, such models of traps as Patriot, Independence, Executive, Commander have also proven themselves to work well.
Electric Flying Insect Trap
Electronic traps are based on the use of Placed inside the body, it attracts with its light all kinds of flying midges, which instinctively flock to the light. But the path to the luminous source is blocked by a thin high-voltage mesh, upon contact with which the insect dies and falls into a special tray installed at the bottom of the device.
Device characteristics
When the device is connected to the network, a lamp lights up, from which heat and a spectrum of ultraviolet rays emanate. This is where the trap begins its work; flying insects are attracted by the glowing heat, causing them to fly straight to the lamp. The radiation spectrum is not dangerous for a person, even if he is constantly in a room with a working device. In addition, the mesh body of the device protects against direct contact with the high-voltage grid. Unlike humans, he is not an obstacle for insects.
Warning
However, in apartments and houses where there are small children, you should not use an electronic trap. Since, despite the fact that the current discharge is not at all fatal, but noticeable, it can greatly frighten a curious baby. Based on its principle of operation and efficiency, the device has earned many positive feedback, the owner’s only task is to not deviate from the instructions and regulations for the operation of the electronic trap and to replace the lamp in a timely manner.
Instructions for using the device
Electric emits rays invisible to the human eye, but the glow itself becomes less bright over time. Having noticed this, we can conclude that it is time to replace the lamp. For efficient work The insect trap lamp must be replaced approximately once a year. Once every 1-2 months, the device should be cleaned of accumulated dead insects. The electronic trap should be placed away from wet areas and food areas.
Electric cockroach trap
Trapping devices powered by an electrical network are used mainly to kill cockroaches. This insect trap is a small device into which bait must be placed. After this, the device is connected to the network for a certain period of time. The army of cockroaches, attracted by the tempting smell of the bait, one after another penetrates into the device, where those who sneak in receive an electric shock incompatible with life.
Since the operating principle of such traps is related to electricity, they should be installed only in dry places. The undeniable advantage of such devices is their durability. The owner will only need to periodically replace the bait and sometimes clean the electric trap of dead insects, of course, first disconnecting it from the network.
Main types of insect traps
In their principle and design, most traps are similar to each other. Some of them are presented in the form of small boxes: square, round or rectangular, along the edges of which there are several holes for entry. A poisonous bait is hidden inside such a device. Other types of traps are based on the principle of ultrasonic devices. Such devices destroy insects using electric current. Which device to choose depends only on your preferences.
Glue trap for insects
Glue traps are among the safest and most effective inventions, which are also very affordable. General principle The device is based on the use of a sticky, but fragrantly attractive bait for insects, which is applied from the inside to the bottom of a small cardboard house. The insects follow the smell, make their way inside the box, from where they can no longer get out, since their legs reliably stick to the sticky adhesive bottom.
It is necessary to place glue traps for insects in the places where these uninvited guests are most actively moving, and such areas can be easily identified by visible traces of their activity. Despite the fact that such an adhesive application does not dry out for quite a long time, nevertheless, the houses have to be changed frequently due to the insects that have accumulated in them. Therefore, when choosing them, it is better to purchase several of these trap houses at once.
Traps using insecticides
The insect trap, which contains a special insecticide inside, also received a lot of positive feedback. Cockroaches that have been inside the device and tasted the poisonous bait, before dying, carry the poison on their paws to their nests and to places where there are large concentrations of relatives, causing them to become massively infected. The substance very quickly produces its destructive effect on the body of insects, poisoning and sterilizing them, and sometimes just a few days are enough to completely get rid of numerous annoying hosts, at the same time greatly reducing their population as a whole.
Such traps can be used repeatedly, since insects cannot adapt or get used to the insecticide from which it is produced. The back panel of most models of these traps is equipped with a sticky surface, which allows you to place the device even on vertical surfaces, for example, on the back wall kitchen cabinet or wardrobe, under the sink, on the side panel of the refrigerator.
Pheromone-based trap
Female insects, during the breeding season determined for them by nature, secrete a substance with pheromones that attracts males. Males can smell this substance, which triggers their instinct to mate, from several kilometers away. An insect trap using an artificially produced pheromone scent is simple in principle. The design is based on the use of adhesive tape, in the middle of which a flavoring agent is applied. Striving for the alluring smell, insects, having stepped on the tape, remain on it, unable and unable to tear themselves away from its sticky base.
Based on the above, we can conclude that today insect traps are very diverse and very effective.
Electric insect traps (insecticidal lamps) Kill Pest (No. 1 Brand in Asia) They are used to combat flying insects in industrial, warehouse, retail, household and office premises, some models can also be used outdoors, for example, in picnic areas and in the open air, they act on all types of flying insects, including flies, mosquitoes, midges, wasps, moths, moths and others. Easy to install and connect to 220 V, easy to operate, efficient and reliable. The company TD PromResurs offers to buy insecticidal mosquito traps Kill Pest for a comfortable life in nature and a summer home from insects.
Operating principle of electric insect traps
The light from the trap actively attracts mosquitoes, flies and other insects, the insects fly towards the lamp and are amazed electric shock from the conductive grid located in front of the trap lamp and die. Thus, the principle by which this device operates does not cause any harm. environment, and at the same time is a modern and effective insect killer.
The effectiveness of traps has been proven from personal experience
Safety: The ultraviolet lamp used in the devices is absolutely harmless to humans and pets and actively attracts flying insects. The outer shield protects the user from live parts. The insecticidal trap and high-voltage grid do not become dirty during operation and do not emit toxic substances or odors.
In the manufacture of traps for flying insects, aluminum and stainless steel, recommended for use in equipment for the food industry. The insect tray slides out from the front panel easily and effortlessly. This equipment meets the requirements of SanPiN for the food industry. The product is certified. Well tolerates the effects of active detergents disinfection.
Certificates for KILL PEST insecticidal lamps
 |
 |
 |
Economical: Insect exterminator, electric fly swatter - can work around the clock 24 hours a day, connects to the usual 220 V electrical wiring of the building, while consuming very little electricity. By installing an electric trap, you will forever get rid of the insects that bother you! A light trap for flying insects will always help you out!
Kill Pest insecticidal light traps for flying insects
| Photo | Name | Description | Price with VAT) |
KILL PEST |
Model TR-33 (22W) Production: |
Radius of action: 60 m.2 Dimensions: 300/100/330 Number of light lamps: 1 PC. x 22W Trap weight: 2 kg. Recommended use: in the cafe, in bars, restaurants, small shops, cottages and apartments. |
PROMOTION!!! 5 200 8 500 rubles |
|
|
Model TR-32 (20W) Production: |
Range: 50 m.2 Dimensions: 400/100/300 Power supply is supplied from a 220V network, the case is aluminum, the chain is included. Number of light lamps: 2pcs x 10W Trap weight: 2.2 kg. Recommended use: in cottages, in dachas, offices and apartments. |
PROMOTION!!! 4 900 7 900 rubles |
 KILL PEST |
Model TR-31 (30W) Production: |
Radius of action: 90 m.2 Dimensions: 500/100/300 Power supply is supplied from a 220V network, the case is aluminum, the chain is included. Number of light lamps: 2 pcs. x 15W Trap weight: 2.5 kg. Recommended use: in medium-sized stores, restaurants and small food production facilities and warehouses. |
PROMOTION!!! 6 300 9 500 rubles |
KILL PEST |
Model TR-30 (40W) Production: |
Radius of action: 120 m.2 Dimensions: 650/100/400 Power supply is supplied from a 220V network, the case is aluminum, the chain is included. Number of light lamps: 2 pcs. x 20W Trap weight: 3 kg. Recommended use: in large |
PROMOTION!!! 7 500 10 900 rubles |
 KILL PEST |
Model TR-60 (60W) Production: |
Radius of action: 180 m.2 Dimensions: 650/100/500 Power supply is supplied from a 220V network, the case is aluminum, the chain is included. Number of light lamps: 3 pcs. x 20W Trap weight: 4 kg. Recommended use: in large by area in supermarkets, warehouses and food production facilities. |
PROMOTION!!! 9 900 19 900 rubles |
Prices for insecticidal lamps from insects to light traps
Recommendations for installing insecticidal insect traps:
- The device must be suspended using a chain (included in the kit) or fixed to the wall using bolts.
- The device should be mounted at a height no higher than 5 and no lower than 2 meters from the floor, preferably under the ceiling.
- The device must be located outside the area of movement of vehicles, people and animals (to avoid mechanical damage).
- The device must be located outside the area of “drafts and high humidity”.
- The device should be located away from direct sun rays and street precipitation.
Rules for installing insecticidal lamps:
- The device can be mounted either on the wall using a bracket or on the ceiling using a hanging chain.
- To install, you need to drill holes with a 9 mm drill. 80-90 mm deep, insert dowels into the holes.
- Secure the bracket to the wall with 70 mm self-tapping screws. and hang a light trap on them. If the mounting is made to the ceiling, then instead of self-tapping screws, hooks are screwed into dowels, onto which the insecticidal lamp is subsequently hung using a chain.
- Connect the device to a 220 V power supply.
- Check the functionality of the insect trap.
- The device must be installed strictly horizontally under the removable fly tray, preferably in dark place in room.
Delivery options.
As an auxiliary measure, traps are used for various insects: crawling, flying. They are designed to collect, gradually poison or instantly destroy pests upon contact with current. The speed at which pests are removed from an object depends on the design and operating principle of the catcher.
They are called light traps for insects, which is due to their design: they are based on an ultraviolet lamp, in front of which there is a metal grid. When flying pests find themselves in close proximity to the grille, death occurs as a result of electric shock. This device suitable for mosquitoes, flies, butterflies and small midges. A person will not suffer from the effects of such a device, however, it is better to place it at a safe distance.
Electric trap for flies and mosquitoes must be cleaned periodically, since when they come into contact with the grille, the bugs fall dead onto the tray located at the bottom of the device.
There are many different devices of this type. The best traps are the Well brand. Analogues of other companies: Hilton, Clatronic, Barguzin.
Electric for crawling species
These are devices with a labyrinth inside, which does not allow pests to escape once they get inside. Suitable for crawling species (cockroaches, ants, etc.), as it is installed on horizontal surfaces. This electric insect trap produces an electric shock. The disadvantage of such devices is their average efficiency; such electric traps are not used as an independent means for killing insects. The advantage is the absence of chemicals.
Adhesive devices
Their device is simple: a box in which there are several entrances for pests, as well as a strip with an applied adhesive substance. The catcher operates simply: ants or cockroaches get inside, attracted by light or food. Unable to get out, they slowly die.
Such a device can be used as a destroyer of flying insects and crawling species. To attract mosquitoes, a light source is often used. Minus - low efficiency in case of severe infection of the apartment. Advantages of glue traps for insects: safety for people, low price, ease of use.
Models with poisonous bait inside
The devices got their name due to the fact that they lure crawling and flying species. However, destruction occurs later outside the trap, since crawling bugs, upon contact with the bait, receive a portion of the poison and leave, spreading it to their fellows. These insecticidal traps allow you to destroy a group of pests at once, which is similar to a lamp for killing flying insects. However, there is also a drawback - the slow process of removing cockroaches and other crawling species.
Mechanical collection
Most often these are containers with bait inside. The device is very simple but effective. It is recommended to cover the entire area of the object, placing traps on different areas. If for some reason insect repellent lamps cannot be used, a device for mechanically collecting bugs should be used. A person will not suffer from this trap, which is its advantage. The downside is the gradual elimination of cockroaches, ants, etc.
Device from plastic bottle and sweet bait
Selection according to insect species
The most effective way to kill cockroaches is with adhesive devices and electrical devices. They need to be located in habitats; the more catchers, the better result. Bedbugs are more difficult to collect with such devices, The best decision in this case, to block their path to a food source. To do this, you need to install the bed legs on a glue trap. Ants are also destroyed by simple device with adhesive surface.
Interesting video:Making a universal insect trap
Making your own design
If it is not possible to buy a device for exterminating pests, you can use your own option - a homemade device.
It is proposed to implement electrical principle impact on flying pests or make a pheromone bait:
- You will need a lamp, a small fan and a plastic bag connected to a juice box. It is necessary to position the lamp and fan so that the air is directed towards the polyethylene trap. The light source will attract pests.
- There are more affordable option insect traps, which are even easier to make with your own hands. You will need an adhesive strip and a preparation with pheromones, which will act as bait.
