Adhesive for plastic and wood. Bonding various materials: advice from experts. What types of plastic are there?

PVC glue

Repair it disaster, which comes suddenly, and then, according to the law of meanness, cannot end. You only wanted to do redecorating, but ended up having to glue sewer or water pipes. For neat installation façade structures, laying tiles on the floor, as well as connecting multiple various designs PVC uses special adhesives for such materials.

I would like to note that correctly selected PVC glue almost completely guarantees a strong and reliable connection. How to choose an adhesive composition in order to obtain an elastic, water-impermeable and invisible seam? To do this, you need to understand the most important thing. What types of glue exist, what do they consist of, how to glue such materials correctly?

Any composition that is intended to glue such products contains

How to glue?

polyvinyl chloride, which is highly soluble in tetrahydrofuran or methyl ethyl ketone. Such compositions usually consist of two components, to which various useful additives are added that increase positive traits main cast. As the composition hardens, the solvent evaporates and chains of molecules intertwine. Thereby ensuring a strong and reliable connection of the material.

What do you need to know to choose high-quality PVC glue?

It is important to understand that all modern adhesives are divided into groups depending on their area of application and what material they are intended for. glue. Starting any renovation work, for example, gluing materials made of polyvinyl chloride, experts recommend using special compounds. When choosing an adhesive for working with such materials, it is necessary to carefully study its composition and properties, for example, setting time. They usually set in about four minutes at room temperature. Should also be indicated on the packaging finished products all basic and important characteristics for operation. For example, is important information How to properly apply and store leftover adhesive.

Surface preparation and gluing process

Typically, surface preparation takes place in several main stages:

For larger surfaces, the gluing time must be increased.

How to glue plastic to wood so it's tight?

It is also important to remember that the amount of adhesive should only be as specified in the instructions. If there is more glue than necessary, it will leak out. Thus, it disrupts the aesthetic appearance of the surface that has just been pasted over, and can also ruin the material you purchased.

Further processing and security measures

For about a day after you have applied the PVC glue, it is advisable not to touch the surface. It is also necessary to protect it from exposure to the sun, temperature changes and other physical and mechanical influences. All gluing work must be carried out in a room with good ventilation, using protective equipment. If there is anything you don’t understand, we advise you to watch a video that will tell you in detail how to properly glue such materials.

You can glue plastic with other materials or with plastic special glue. Technologies are developing, this also applies to the types of adhesives, now there are big choice. Some adhesives are used for bonding plastic to plastic, others are designed for metal or glass. In order to bond two different materials together as efficiently as possible, it is necessary to select a suitable adhesive composition. If the glue does not match the materials, they may come apart or crack over time.

Glue with epoxy resin

Which plastic is difficult to glue?

To decide on the type of plastic, you just need to look at the special markings on the product. On the plastic you need to find a triangle of three arrows following each other. An index letter will be indicated next to this triangle. Usually on the glue tube there are explanations for what purpose it is used. In addition, attached detailed instructions, from which this information can be gleaned.

If the plastic has the letters PS, or simply the number 6, then the plastic is called polystyrene. For polystyrene, it is best to use epoxy glue or plastic cement. These two options will help glue plastic together or with most other materials. Many people wonder how to glue plastic to plastic. Again, pay attention to the labeling.

Most types of plastic that are used in Everyday life or in the production of simple things, they are quite easily glued with any good glue. And there are types of plastic that simply will not stick together, they are easy to recognize.

If next to or inside the triangle there are numbers 2, 4, 5 or the designations HDPE, LDPE, PP, UMHW, this type of plastic is called polypropylene - it is extremely difficult to glue. Such plastic can be glued to any other material using Weld DP 8010 glue. It is quite rare to try to glue this material with anything, so the range of glue is small. Using Weld DP 8010 glue you can glue plastic to film, metal and glass.

If you want to stick an adhesive film on plastic, then you do not need additional fixation. Try to thoroughly treat the surface of the plastic with alcohol to degrease it. Try not to touch the plastic with your hands so as not to stain the surface. The smooth surface of plastic cannot provide a stable and durable attachment.

How to Improve Grip

To increase adhesion, you need to run a sanding sheet over the plastic, then the surface will become rough and will hold better. It's best to choose sandpaper with a grit of no more than 200. Do not try to sand the plastic for too long, you just need to create a rough surface.

Take epoxy glue and spread it evenly in a thin layer.

This glue is suitable for most materials; you just need to read the instructions and properly treat the surface.

How to glue

Ideally, you need to apply the selected adhesive with a brush to the plastic and other surface. If you are going to glue plastic to glass, then the layer of glue on the glass should be larger than on the plastic. The situation is similar with wood, don’t skimp on the glue. If you need to connect two plastic products, then you won’t need a lot of glue.

How to glue the plastic?

If you are using cementitious glue, place two plastic pieces together with a small layer of glue between them. Apply the solution along the edges of the plastic so that the joint line is completely covered.

Objects must be fixed so that they are pressed against each other. If the items are square and you can stack them on top of each other, then you should do so. Use duct tape if you can't press two items together.

After applying the glue and fixing, try not to disturb the objects for 24 hours; after this period, you can begin to use them not at their full potential. Any glue differs in composition and properties, so after 24 hours the fastening in most cases will not yet be as strong as possible. If you protect the item from the effects of temperature changes, the glue may not set well, thereby weakening the contact.

How to glue plastic pipes

To glue plastic pipes, it is necessary to process them on both sides, which will be connected. Using a sanding sheet, sand off a small layer 2-3 centimeters from the beginning of the pipe. Do exactly the same procedure with the second piece of pipe. Once the pipes are ready, connect them and apply cement thinner. This solution will adhere firmly due to the fact that you have treated the pipes.

This type of pipe fastening is much more reliable when compared with any type of glue. Cement solvent will not lose its properties and strength over time. Water may begin to corrode the glue.

So, if you find a marking on the plastic that shows what kind of plastic you are using, then you need to contact a hardware store. At the store, a consultant will tell you which glue is best to use for different surfaces. The information in this article is superficial.

There is a situation when there are no identifying marks on the plastic, in which case you can buy universal glue. By universal I mean epoxy glue, it is capable of gluing any type of plastic if processed correctly. No glue can glue two objects or parts together for a long time if the surface is not prepared. Don't ignore this information, it will significantly improve the quality of your work. If you buy expensive glue, the packaging will indicate that the surface requires pre-treatment.

What not to use

Now they are actively using silicone-based glue. Such adhesives, at first glance, seem very convenient and practical, but the reliability of the connection leaves much to be desired. If you need to connect the parts for a long time, then you should avoid this option.

Types of glue. What kind of glue to glue what

How to choose transparent glass adhesive with other materials

Often there is a need to glue glass to another material with your own hands for decorative or household purposes.

How can plastic be firmly glued to other materials?

But through clear glass droplets of glue always remain visible, which negatively affect the decorative qualities. To avoid this, you need to use transparent glass glue.

Glue requirement

Transparent glue has different compositions and properties, so before choosing a composition you need to decide on a number of requirements:

Types of transparent glue and areas of application

The following compositions of transparent adhesives are most often used in everyday life:

cyanoacrylate,
silicone,
silicate,
polyurethane.

Cyanoacrylate

This clear glue is almost universal. It is capable of gluing glass to wood, metal or plastic. You can use it to fix required item or stick on decor. This adhesive composition has the following qualities:

In terms of its strength characteristics, it surpasses many fastening joints and is considered “cold welding”.

Many transparent Moment adhesives are made with the addition of cyanoacrylates.

Silicone

Clear silicone glass adhesive is used when a sealant is needed. Silicone adhesive is suitable for gluing glass to metal, wood or plastic, forming a strong, almost invisible connection. But it has one drawback - silicone glue polymerizes within 24 hours.

If you need quick gluing, then you should choose not silicone, but another transparent glue, it is better to take Moment.

Silicate

Transparent adhesive based liquid glass waterproof, durable and has sealant properties. They can be used to glue almost anything, from wood to metal. It is suitable for both gluing large surfaces and gluing decor.

Polyurethane

If you need a sealant and Moment at the same time, then you should pay attention to durable polyurethane adhesive. Transparent adhesive for glass and metal of the polyurethane group allows you to quickly obtain a strong connection when gluing. It is used for repairs car glass and in other areas where resistance of the adhesive joint to various loads is required. In terms of strength, only cyanoacrylate composition can be compared with polyurethane sealant.

How to glue glass

The process of gluing glass to another material with your own hands occurs in the following way:

Both surfaces are cleaned of dirt and thoroughly polished. At home it is recommended to use for this toothpaste and a brush. If you plan to connect with end joints, then you need to carefully polish the joints. The video shows how surfaces are polished.
After the bases have been polished, washed and dried, clear adhesive is applied to one of them, usually the smaller one. For example, if you need to glue glass decor, then glue is applied to the decorative elements.
The surfaces are connected, and excess glue is immediately removed using a cloth soaked in white spirit or another solvent suitable for the glue.
After joining the surfaces, the product is left until the transparent glue is completely polymerized. The time depends on the composition of the adhesive.

In order for glass glued with transparent glue to stay on any surface for a long time, you need to take into account everything when choosing the composition external conditions, which will affect the finished product.

For covering wood with veneer (single-layer plywood), “SYNTHETIC JOINERY” glue is most suitable, since it forms a completely colorless seam. You can use casein glue. Polyvinyl acetate glues are less suitable due to low water resistance, and bone glue is simply inconvenient to work with; in addition, it forms a painted seam.

If glue is applied to both surfaces - both the wooden product and the plywood - the plywood will immediately curl into a tube, and when straightened, the joints of the individual plywood sheets will separate and small cracks will appear around them. Therefore, only the surface of the wooden product is coated with glue and dry plywood is placed on it. It is pressed with a load for 40 minutes so that the pressure in the seam reaches 6-8 kgf/cm2. The seam is completely cured within 6 hours.

When using “SYNTHETIC JOINERY” glue, which, as we have already said (see page 132), is two-component, you can not mix the resin and hardener in advance, but apply them to the product separately: first a layer of hardener solution, and then a layer resin. After this, dry plywood is applied and pressed down with a weight. The resulting adhesive seam is quite strong, but fragile. He withstands the action cold water, but in warm temperatures (60°C) it quickly collapses.

Decorative films made of polyvinyl chloride and laminated paper decorative plastic It is best to glue it to wood with rubber adhesives “ELASTOSIL-2”, “88N”, “KR-1”, “Zh-3” and “DUBOK” glue based on polyvinyl butyral.

It is useful to sand the underside of the film with fine sandpaper and degrease it with gasoline. Glue is applied to both surfaces to be glued, film or plastic is placed on wooden product, carefully “squeezing” air bubbles out of the seam, and apply a load (about 3-4 kgf/cm2) for 20 minutes. If you use “OAK”, then after applying the glue until the surfaces to be glued together, you need to wait 2-3 minutes. The seam is completely cured in 10 hours (with the exception of “ELASTOSIL-2” glue, which finally hardens after 3 days, and “DUBOK” glue - after 1 day).

When gluing with ELASTO-SIL-2 glue, it is absolutely necessary that the surfaces to be glued are absolutely dry and that no moisture gets on the seam during setting.

Fabrics are firmly glued to wood with “POLYVINYL ACETATE” glue, “BF-6”, “OAK” and “UNICUM”. However, “POLYVINYL ACETATE” and “BF-6” adhesives have disadvantages: the first is characterized by low water resistance, the second forms a seam colored yellow.

When gluing with polyvinyl acetate glue, the fabric and wood are coated with glue and a small weight is applied for 10 minutes. After 12 hours, the seam is completely cured.

BF-6 glue is also applied to both surfaces, but in two layers. The first layer is dried, and then the second is applied to it. After this (when the second layer has not yet completely dried), the fabric and wood are applied to each other and the glue seam is ironed through a wet rag with a hot iron until the rag is completely dry. When using UNICUM glue, instead of ironing, it is enough to simply press the seam for 2 hours with a weight.

Plastic products are widely used in everyday life. If they break, you need to know what kind of plastic glue you will need for repairs. To ensure a strong and safe gluing result, we advise you to become more familiar with the types of plastic and the rules for selecting an adhesive composition.

What does the marking on plastic mean?

Since some adhesives may dissolve rather than bond plastic, it is recommended that you examine the markings on the broken product. The plastic type icon looks like a triangle formed from arrows (recycling symbol). Inside it there are numbers from 1 to 7, and below there is an inscription. These identification marks determine whether the material belongs to a particular type of plastic, which will allow you to select the correct adhesive.

What types of plastic exist:

1 (PET) - stands for polyethylene terephthalate. It is used to produce food packaging for liquid products.
2 (HDPE) - high density polyethylene, intended for the production of packaging and shrink film.
3 (PVC) - polyvinyl chloride, better known as PVC. Plastic windows, linoleum, etc. are made from it.
4 (LDPE) - low-density polyethylene, toys for children, pipes, bottles, and packaging containers are made from it.
5 (PP) - polypropylene, heat-resistant material. Used for the production of food packaging, medical disposable instruments, household appliances, pipes, thermal dishes.
6 (PS) - polystyrene. They make it out of it disposable tableware. Foamed polystyrene is widely used in construction.
7 (O) - this type of plastic cannot be recycled and consists of a mixture of polymers, paper, and foil.

Glue marking

The main difficulty is that the glue markings do not match the plastic recycling symbols.

How is glue for plastic marked?:

PE - polyethylene;
PC - polycarbonate;
PP - polypropylene;
PVC - polyvinyl chloride;
PMMA - organic glass;
PUR - polyurethane;
PA 66 - polyamide.

Sometimes it's easier to find clear instructions in Russian than the marking icon. But if there are no recommendations on the packaging, then the symbols will help you make the right choice.

Types of glue

Plastic has low adhesion due to its smoothness, making it more difficult to glue than other materials. In industry, such products are fastened by welding. This method is not used at home, but you can choose good glue. The principle of operation of the composition is this: it dissolves the surface, and with strong squeezing the parts are connected. Therefore, the main component of plastic adhesive is a solvent of synthetic polymers. For viscosity, the composition contains liquid polystyrene.

Liquid glue for plastic and Moment plastic

The group of adhesives for plastics can be divided into the following types:

Hot melt adhesive. Represents solid glue sticks. They must be heated before use. There are special ones, and there are also types of glue for use without a gun. This composition is suitable for small jobs, as it does not have special bonding strength.
Contact. It is often sold complete with a hardener, which must be mixed with the bulk in the proportions indicated on the pack. This type of glue can tightly glue plastic, but there is one drawback: the product is toxic. It is necessary to use the means personal protection. For better fastening of the parts, after applying the glue, you need to wait 10 minutes, and only then squeeze them firmly.
manufactured at water based and is considered the least effective way fastenings. It takes a long time to dry (at least a day). It is used to repair small items that are not subject to increased loads. But liquid glue samples do not deform the plastic; this is very important for working with small parts.
Reactionary- reliable and affordable option glue for plastic. There are several types of such compositions: some are designed to work under water, others harden under the influence of ultraviolet radiation, and others work on outdoors. There are one-component and two-component ones.

Advice! Do not use toxic contact adhesive to glue children's toys.

Product examples

What can be found on the shelves of construction and hardware stores:

« Moment plastic"- a type of glue that binds many types of plastics together. It has a transparent base, sets quickly and forms a strong connection. This is a waterproof and heat-resistant composition. However, it contains toxic substances and is not used to repair products that come into contact with food or skin.
"Super Moment"" - instant glue.
- epoxy glue, hardens in 20 seconds. Simple and easy to use composition.
"" is a brand that offers several types of glue for plastic. Among them are adhesive-sealant for transparent plastic, composition Plus for PVC, PMMA- adhesive for polystyrene and acrylic surfaces.
« Second» - superglue for hard plastics. One of the fastest acting compounds.
For minor car repairs, special automotive plastic sealants are sold.
Rexant - hot melt adhesive, available in the form of rods. It can be transparent or colored (to disguise joints if colored parts are connected).
Akfix HT300 - thermo- and water-resistant composition. Withstands temperatures up to +300 degrees. This adhesive sealant contains silicone. It reacts to humid air.

This is not the entire range that the adhesive industry offers. It cannot be said that any glue is better or worse. Each composition is intended for special types works Read the instructions carefully and follow all recommendations.

How to glue plastic

The type of plastic has been determined and the required glue has been selected. How to properly glue plastic objects:

Parts should be cleaned. If necessary, the item is degreased soap solution or ethyl alcohol. A clean surface has greater adhesion and objects will be easier to stick to.
It doesn't hurt to lightly sand the surfaces to roughen them up. This way the glue will stick better.
Two-component compositions are mixed only after surface preparation.
If parts are coated with glue using a brush, then use an object with artificial bristles.
The glue is applied in such an amount that when compressed, its excess does not protrude to the surface.
You need to squeeze objects together firmly, but carefully.
The duration of adhesion of materials depends on the selected adhesive.

Advice! Use a needle to glue a thin crack.

Sometimes you need to attach a variety of materials to plastic: wood, glass or metal. In this case, the glue must take into account the characteristics of the two surfaces being connected, and not just the plastic.

Glue Super moment

Tips for work with plastic:

For external work, waterproof glue is used.
Despite high temperature which glue can withstand, plastic objects themselves should not be subjected to it.
When working with contact glue it is necessary to ventilate the room.
The best adhesive for marking 7 (O) is epoxy. This type is also suitable for polystyrene.
If there is no marking on the product, then build on this: for plastic toys and artificial glass, polystyrene is used mainly; For bottles, buckets and boxes, glue designed for polypropylene and polyethylene is suitable.

Take the time to study the labeling of plastic products and glue. If repairing small toys like Lego is a simple process, then for more serious work the familiar Secunda glue may not be suitable for everyone.

An important part finishing works indoors – protection of corner lines of walls from possible damage. Even after a high-quality repair, wallpaper on the corners, as well as door and window slopes can quickly become unusable. It is recommended to strengthen wear-prone areas with PVC corners. Let's look at what you can use to glue a plastic corner and how to do it.

PVC corners give the renovation a finished look

Plastic corners are finishing elements that can protect external corners walls from damage. They also play a decorative role, giving the interior integrity and completeness.

Among the many types of corners, PVC products are considered popular. They are universal. They are finished with:

door, window, arched openings;
window sill niches;
places where the walls meet the ceiling;
external and internal corners of walls;
gaps between the wall and the surface of the kitchen unit.

PVC panels come in white, colored (with various shades and textures) and with double-sided coloring. According to the form they are distinguished:

standard version (equilateral corners for wall corners);
T-profile;
L-shaped (arched).

Why do experts recommend gluing plastic corners to the wallpaper? Corner profiles made from polyvinyl chloride are different:

Durability. The products retain their properties for more than 25 years.
Durability. They have anti-corrosion properties. Resistant to cracking and abrasion. Not affected by humidity and ultraviolet radiation.
Easy to install. They are easy to cut with a knife or scissors.
Low price.
Unpretentiousness in care.
Light weight.

There are also negative aspects. PVC products lose color over time. If a fire occurs, they melt, releasing toxic substances. They should be protected from damage by sharp objects.

How to glue a plastic corner

To ensure that the work done is not in vain, you need to choose an adhesive that is best suited for plastic corners. Construction stores offer a wide selection of adhesive compositions. Finishing of corners and slopes is carried out using the following adhesives:

Liquid Nails. The composition has high degree strength. Using liquid nails, you can securely attach a PVC or expanded polystyrene corner to any surface, in particular to textured wallpaper, wood or concrete. The glue has excellent adhesive properties and sets quickly. If necessary, a composition of a certain color is selected. It is better to glue white plates with a colorless compound.

Liquid nails are often used when installing corners

Polyurethane glue. Durable, elastic, tightly glues PVC and MDF. The instructions say that not every polyurethane-based adhesive is intended for PVC corners. A significant disadvantage is the pungent odor and high cost.
Silicone sealant. Recommended for fixing profiles to wallpaper, plastic panels, as well as ceramic tiles in the bathroom, in the kitchen. It is advisable to use acrylic sealant. However, when using silicone glue, over time you can observe a weakening of adhesion, especially in places where the corners are most often touched. Therefore, if you are planning to attach a plate to a tile using silicone, you should choose compounds with high adhesive properties.
Liquid plastic. The purpose of the composition is to glue exclusively PVC parts. It is good to work with, for example, when finishing joints plastic windows. This type of glue must be used carefully, since a special chemical reagent will be needed to remove the mixture that accidentally gets on the wallpaper.

PVC profiles are self-adhesive. It is necessary to glue the plastic corner onto the wallpaper after taking measurements. After this, the protective tape is removed from the product, and the plastic is pressed against the outer corner.

Tools for work

To fix the plastic you need glue gun. It allows you to accurately apply the composition used. You also need to stock up on:

hacksaw or metal scissors;
stationery knife;
metal square;
tape measure, pencil;
masking tape;
glue mixture.

You can obtain profiles of the desired size and shape using a miter box. However, if this tool is not there, it’s okay.

How to glue a plastic corner

To glue plastic corners to wallpaper or slopes, you should take into account the surface to which the plates will be attached. Corners can be glued to wallpaper in two ways:

Directly to wallpaper. Important: the wallpaper texture should be shallow, otherwise dust will accumulate in the resulting gaps.
With cutting out the strip and applying glue to the wall. To do this, you need to place a plastic corner on the installation site, and then cut off the wallpaper on both sides with a knife.

If there are curved slopes, flexible PVC profiles will be useful.

How to cut correctly

Before gluing the corner, the required length is measured. Trimming at an angle of 45 degrees is carried out using a sharp scalpel knife or hacksaw. Blanks are also made using a miter box.

How to glue

If you need to attach plastic corners to the wallpaper, first the area to be treated is freed from the finishing material. The width of the cut strips should be slightly less than the width of the profile. Next we work like this:

on inner side Apply the selected glue to the planks;
We apply the polyvinyl chloride profile to the surface and press it along its entire length using a napkin or dry rag;
We secure the plastic with masking tape;
After the glue has set, remove the tape.

Before gluing the PVC profile to the windows or doorway, it is necessary to examine the surface for any unevenness. If it is not possible to correct the defect, use flexible plastic panels.

When it is necessary to glue the corners between the wall and the bathtub, it is important that the surface of the bathtub edge that is adjacent to the wall is clean. To protect the tiles from possible glue getting on them, you can use masking tape.

First, treat the side of the bathtub and the adjacent section of the wall. antiseptic and a degreaser. The next step is filling the gaps silicone sealant. The PVC corner is glued after a day or two.

How to glue the inner corner to the ceiling? When fixing products, it is important to avoid the formation of gaps. If adhesive has come out, it should be removed. After installing the PVC profile, finishing putty is used.

When making preliminary markings, you need to be as precise as possible to avoid gaps between the joints. It is better to increase the profile length by 0.5-1 mm. Thanks to their elasticity, the panels will fit perfectly into place.

Before installing the corners on the walls, the panels are cleaned of dirt. If the cutting of the panels turns out to be uneven, do not fill the gaps with silicone. Gradually, the defective areas will become covered with dust and become noticeable.

To attach the arched corner, you will need construction hair dryer. If after 2-3 warm-ups it was not possible to bend the profile, further attempts should be stopped. Prolonged heating makes the material hard and brittle.

Popular finishing materials Recently plastic panels have become available. Their use allows you to create a beautiful finish in a short time.

The variety of textures, colors and sizes attracts those who want to create unique design premises. They are used for finishing kitchens and balconies, and their resistance to humidity makes them suitable for use plastic panels simply irreplaceable for covering bathroom walls.

Knowledge of what will allow you to successfully install this decorative material.

Glue requirements

Most often, plastic panels are used to finish the bathroom. This means that the adhesive used must be able to hold securely even in wet conditions.

Choose an adhesive with high adhesion and fast setting

Required characteristics for glue:

moisture resistance. Since the humidity in the bathroom is high, glue for gluing can only be used from moisture-resistant brands;
high degree of adhesion. This is necessary to ensure better adhesion to the wall;
resistance to different temperatures and their changes. The use of panels in the bathroom, where temperature and humidity tend to change quickly, is only possible if they are securely attached to the wall surface;
presence of antibacterial properties. A moist and warm environment is ideal for the growth of bacteria and fungus. In view of this, the glue for wall panels must be antibacterial;
durability. Although the panels can be glued with almost any glue, in order for them to be securely fixed for many years, a high-quality composition is needed;
fast “setting”. It is necessary that within 10 minutes after gluing the panel to the wall, it is already firmly fixed;
absence high level toxicity and pungent odor;
transparency.

An adhesive that meets all these requirements will be excellent for gluing PVC panels in any room, even in the bathroom, where dampness and high temperatures are common. This will allow the finish to remain unchanged for many years.

Options for gluing panels

Exist different variants how to glue plastic panels. Each master has his own glue, proven over the years, and yet there is a wide choice in this area, but how to glue PVC panels? The following describes the main options:

Emfikol 34012A. This glue is specially designed for attaching polyvinyl chloride, as it has good adhesion to plastic.
Kleiberit 636. It is created on the basis of synthetic resin, therefore it is environmentally friendly.
Moment Crystal. This glue is used for gluing to almost any surface.
Liquid nails 601. This is a universal adhesive for interior work.
Liquid nails 901. Glue that is used both for indoor and outdoor work. It is capable of securely attaching even heavy materials.
Liquid nails 915 is an adhesive that is specifically used for gluing boards and.

Table. Main characteristics of different adhesives

Glue	Advantages	Flaws
Emfikol 34012A	Strength, viscosity, resistance to temperature changes, lack of color.
	Affordable price, moisture resistance, quick drying.
Moment Crystal	High degree of adhesion, durability, lack of color, resistance to moisture and temperature changes.	High price.
Liquid nails 601	Durability.	Lack of moisture resistance.
Liquid nails 901	Moisture resistance, versatility, strength, durability.
Liquid nails 915	Resistance to moisture and elevated temperatures (especially for bathrooms).	Opaque, but light in color.

However, it’s not enough to just choose the right glue; it’s important to know how to glue the plastic panels so that you don’t have to redo everything later.

Technology of fastening plastic panels

Glue the panels onto a cleaned and primed coating

Although it may seem that panels are a difficult task, in fact, following simple instructions, all work can be done with your own hands and without the involvement of specialists.

Some people prefer to mount such material on a pre-assembled frame, but this reduces the area of the room. But how to glue PVC panels and is it possible? The following describes step by step the technology of fastening with glue.

When gluing panels, it is important to avoid bending the material. You also need to remember that protective film removed only after final installation. To ensure that the lines along which the material is cut are as smooth as possible, cutting and cutting should be done only from the front side of the material.

As you can see, the work of gluing plastic panels can be done independently. First you need to decide on the glue on which this material will be attached. For an overview of adhesives for PVC panels, watch this useful video:

For finishing bathrooms with one of good options is the use liquid nails 915, which are specially designed for use in rooms with high humidity. Before installation, it is important to make sure that the walls are even, because this determines appearance premises after installation of panels.