Frame house interior decoration. How to sheathe the inside of a frame house. Which facade to choose for a frame house

After the construction of the house using frame technology, the finishing work begins. First, rough finishing of floors, walls and ceilings is carried out, for example, with oriented strand boards or gypsum boards. Subsequently, finishing materials are applied to them. Decoration Materials: plaster, wallpaper, tiles, lining, timber boards, etc.

For roughing and finishing there is a choice between alternative options. Each of them has its own specifics, appropriately suited to certain operating conditions.

The challenge is to choose optimal option, it is not worth paying for outstanding material properties if they are not used.

Peculiarities

Domestic Finishing work consist of two main parts: rough and finishing. The first includes the choice of material for wall cladding, their insulation, floor screed, installation of window systems and doors, and slopes for them.

Internal walls can be sheathed:

drywall;
wood boards, for example OSB.

After this, the final cladding begins; the following materials are suitable for it:

lining;
wallpaper;
decorative plaster;
ceramic tile;
flexible stone, etc.

A correctly and beautifully brick-lined sheathing frame is also quite popular today. This perfect option, for example, for a summer residence. You can also use DSP and other materials.

Materials

When selecting a material, it is important to take into account the specifics of the room: what it is intended for and what the operating conditions will be.

Drywall

The material that allows you to achieve ideal evenness and smoothness of the walls is different reasonable price, but weakly resists loads.

With the help of drywall it is easy to create various sides, protrusions and other relief decorative elements.

Other features of gypsum boards include the following:

relative lightness simplifies finishing work, the material does not load the structure;
perfectly hides uneven surfaces;
cannot be used for flooring;
poor moisture resistance (except for a special subtype);
simple installation on a profile frame;
inside the frame you can carry out communications: pipes and wiring, as well as place additional insulation;
short period of finishing work.

OSB

A material somewhat similar to gypsum plasterboard: it provides a smooth and even base for finishing work, and also compares favorably at an affordable price. TO characteristic differences can be attributed to higher strength and significantly large mass, which determines other requirements for the room and the building as a whole.

Features of oriented strand boards include:

they need more durable mounting means; at least two people are required to fasten them due to the significant weight of the sheet;
can be used to cover any surface: walls, ceiling, floor;
more moisture resistant than gypsum plasterboard, but still require additional varnish coating.

Imitation of timber

The material has excellent performance and aesthetic qualities; it can serve as both rough and fine finishing of walls. The main disadvantage is the relatively high price of the material.

To prevent the finish from visually resembling lining, it is recommended to use panels with a width of more than 90 mm.

To others characteristic features imitation timber include:

excellent heat and sound insulation;
outwardly indistinguishable from more expensive analogues: profiled and laminated timber;
does not shrink or crack;
easy to install, the work can be performed by one person, a reliable fastening system ensures the structural integrity of the wall;
a huge number of wood species determines a wide choice of textures and shades with a characteristic pleasant smell;

moisture resistance depends on the selected breed;
price variability, there are both budget options with good qualities(pine, spruce, etc.), as well as expensive species with more impressive properties (oak, cedar, tropical species), while imitation timber is cheaper than profiled or glued analogues;
resistance to temperature changes;
high flammability, the level of which can be reduced by fire retardant impregnations;
susceptibility to fungal mold at high humidity can be reduced by antiseptic impregnations;
requires constant updating of the protective coating - varnish;
rotary and corner elements have a higher cost.

Wallpaper

A finishing material that provides a wide choice not only in aesthetic diversity, but also in species. Wallpapers on various bases (paper, non-woven, vinyl and fiberglass) differ operational features and are used for various specific indoor environments.

TO characteristic features also include:

a huge selection of external designs, including texture, color, pattern, roll width;
Easy installation does not require professional skills and can be carried out by one person.

Features by subspecies:

paper vulnerable to moisture, have poor wear resistance and durability, low price;
vinyl resistant to mechanical stress, moisture-resistant and durable;
non-woven serve as an excellent basis for decorative painting;
fiberglass They have high strength and fire safety, which is uncharacteristic of wallpaper, and are easy to paint.

Lining

A wooden product characterized by a pleasant appearance and greater affordability than timber or its imitation. Suitable for all lovers of environmentally friendly materials and savings. Other properties of the lining include:

a wide selection of wood species with specific texture and shade;
high resistance to abrasion and mechanical stress;
the smell of wood has a positive effect on the mood and well-being of residents;

good noise and heat insulating properties;
price variability: lining differs in cost not only by wood species, but also by grade, which makes it more affordable and allows it to be used even with low incomes;
needs covering protective composition and its cyclical renewal;
good flammability - weak Fire safety, can be reduced by fire retardant impregnation;
susceptible to fungal mold, can be reduced by an antiseptic solution.

Plaster

Finishing decorative plaster fits well on walls already finished with gypsum board or OSB and creates a smooth surface with an excellent appearance.

The main properties of plaster include:

wide selection of colors and shades;
resistance to temperature changes;
good moisture resistance;
the non-porous structure enhances thermal insulation, but impedes the natural ventilation of the walls;
If you want to redo the finish, the high strength of the material will be a disadvantage; its dismantling will require a lot of effort.

Ceramic tile

Classic finishing material with excellent decorative qualities. You can also highlight the following characteristic features:

a wide range of colors, patterns and textures of the product;
complete waterproofing and immunity to direct water;
durability;
complete naturalness of ingredients;
high resistance to pressure and abrasion;
high-quality installation requires hiring a specialist;
difficulty when facing round and rotating surfaces.

Flexible stone

Modern material, imitating a natural analogue, it is flexible and plastic, and its texture fully matches the original and is just as beautiful. Sold in the form of slabs and wallpaper. Other features of flexible stone are:

high resistance to abrasion, pressure and shock loads;
environmentally friendly composition;
can cover surfaces with complex geometries;
processed and installed easier than its analogue;
durable, but inferior to the original.

Design

For cladding residential premises, you can use the entire list of finishing materials.

When finishing the kitchen it is worth considering its specifics: high humidity and contamination in the cooking area, so for the “apron” it is better to choose a water-resistant and easy-to-clean material, for example, ceramic tiles, flexible stone, plaster.
For the bathroom, characterized high humidity, the same tiles, plaster, followed by painting with a moisture-resistant, vapor-permeable type of paint: rubber, vinyl or acrylic will do.
For children's materials that are resistant to abrasion and impact, safe, and can be cleaned would be appropriate: laminate or painted lining, decorative plaster are suitable for walls, linoleum, parquet, laminate are suitable for flooring.

How to finish it yourself?

If you choose the option of decorating the house yourself, you must follow a certain methodology so as not to complicate the process by wasting time and remodeling costs.

The decoration of the premises should be progressive: it is necessary to move from one completed room to the next. It is inconvenient and impractical to finish all the premises at the same time.
Renovation of premises begins from the end of the house farthest from the door and moves in their direction. This sequence is associated with the need to take out the trash, and, accordingly, dust and dirt; if you start from the door, the finished rooms will quickly become dirty.
You need to start finishing work only after laying all communications: pipes, wiring, ventilation ducts and other things.

Finishing is done from top to bottom: first the ceiling, then the walls, then the floor. This is due to debris falling down: if you start from the floor, then when finishing the ceiling flooring and the walls will get dirty. The only exception is dropped ceilings, they are installed last.
All surfaces not related to the finishing work at this stage should be covered with film to protect them from debris. Thus, in the future you will not have to clean them from excessive contamination. Of course, this applies primarily to finished surfaces.

The duration of finishing work depends on several factors:

type of finishing work: painting gypsum boards is much faster than finishing the walls with boards like timber and then varnishing them;
availability of building materials: if they are not pre-purchased for the entire scope of work, there may be delays in delivery, lack of necessary items in the warehouse, etc.;
financial support;
other nuances.

With continuous work, finishing a house with an area of about 40 square meters. m takes a month, for an area of 60 square meters. m this period increases to 1.5-2 months and so on. Starting finishing with my own hands, it is worth considering that these are deadlines for permanent work, for which there may not be time, and then the finishing will drag on for years. An alternative solution is to hire a team of workers, which will reduce the time by several times.

One of the promising areas in construction is frame technology prefabricated houses. More and more people in Russia and neighboring countries have become interested in frame housing construction and are implementing house projects using this technology.

And this is not surprising. A lot of reliable information and professional construction companies who you can turn to for help. And the main thing is that similar system construction of housing saves money and time.

Many generations abroad have already appreciated it, proven not just for decades, but for centuries.

Story frame construction low-rise buildings originate in Canada. The settlers needed to quickly build housing and settle into the new territory. Then many countries also began to build frame houses, including the Scandinavian countries, Germany, and the USA.

This technology has a number of advantages:

lightweight design simplifies the construction of the foundation and prevents soil subsidence;
as already mentioned, it saves time and costs on building a house;
Smooth wall surfaces facilitate interior and exterior wall finishing; no additional leveling of vertical surfaces is required.

Today we will talk about the internal and exterior decoration frame houses.

How to decorate the facades of a frame house?

The main element of such a house is a wooden or metal frame system filled with insulation. Finishing options frame house so varied, it all depends on your taste and capabilities.

All wooden elements treated with antifungal and fire retardant compounds.

The walls of a frame house look like this:

Many people wonder: is double-sided wall cladding necessary? OSB boards. This, of course, leads to an increase in the cost of the structure, but will provide the house with rigidity and solidity. You can safely hang furniture and other equipment on the walls.

Technology frame house construction will not require additional time for shrinking and drying of the house building materials, so you can start almost immediately finishing walls, both external and internal.

There are several options for finishing facades. Like any facade, it can be plastered and painted, the walls can be lined with siding, clapboard, or a block house (imitation of a wooden house) can be used.

There are two ways to plaster the facades of a frame house:

plastering is done in sheets facade foam plastic, pre-fixed to the facade using glue and clamping dowels;
or plastered directly on OSB sheets, having previously treated the joints with frost-resistant sealant, pasted the walls with fiberglass mesh and primed them. But this method is not durable; it is more suitable as a temporary option.

Facing with siding – a budget option, while the facades look finished and neat. A variety of colors and imitation of various textures gives ample opportunities make the house attractive by combining it with the color of the roof and window frames.

First, along the perimeter of the facades, a sheathing is made of 50x25 mm bars or metal profiles in increments of 50 cm, to which panels or siding strips are subsequently attached with self-tapping screws. Decorative profile corners are installed at the corners of the house.

As facing material can be applied facade board , this is what residents of Scandinavian countries do, preferring more natural and environmentally friendly materials. In addition, wood provides additional thermal protection.

To fasten the board you will need the same frame of bars. In addition, for durability, the board must be treated with an antifungal compound, primed and painted in two layers.

There are several types of façade board fastening:

horizontal or vertical;
tongue-and-groove connection:
butt or overlap fastening.

Composite boards meet increased requirements: they will last longer than conventional boards and do not require additional treatment with varnishes and mastics.

Variety wood finishing facades is block house , while the house looks as if it was built from timber.

Facade cladding of a frame house can be done clinker tiles or artificial stone, which will give the house not only an attractive appearance, but also protect the walls from precipitation and damage. Before cladding, attach to surfaces insulating material- polystyrene foam and covered with reinforcing mesh, and then the tiles are glued to flexible adhesive.

Brick cladding of facades – not the cheapest option, because the frame construction system itself is not primarily attractive high cost compared to other types of construction. However, there are adherents of this finish. Nevertheless, such cladding increases the reliability of facades and gives the house a respectable appearance.

Between the walls and brickwork a ventilated gap must be left. For such cladding, a foundation with a high load-bearing capacity will be required, on which the brickwork will rest.

Interior decoration of frame house walls

The most common material for covering walls frame system Drywall remains inside the house. It is better to use moisture-resistant sheets. For greater rigidity and solidity, two layers of plasterboard are used.

Using gypsum plasterboard, you can perform almost any finishing: plastering and painting, or wallpapering, having previously covered the joints between the sheets of drywall with masking tape, puttying and priming the surfaces. You can also lay ceramic tiles on the walls and floor.

The same boards, lining and block houses are suitable for cladding, it all depends on your preferences and the chosen style.

Some prefer to finish directly on OSB sheets, but the walls will need to be primed in several layers, since the sheets absorb liquid like a sponge. As a rough finish and for partitions, you can also use plywood, magnesite boards, and chipboard.

Pay special attention to the so-called “wet” areas. Before attaching moisture-resistant plasterboard to the surfaces of walls and ceilings, it is necessary to carefully treat all joints on the walls with sealant and completely process the floor surface and the lower part of the walls around the perimeter to a height of 150-200 mm. Next, the surfaces are finished with the selected facing material.

Instead of plasterboard, the walls of the boiler room can be covered with fire-resistant cement-bonded particle boards (CSP).

Any construction and repair leads to certain costs. Therefore, before starting work, carefully study the prices on the construction market in your region, weigh all the pros and cons, make at least a rough estimate, and the decision will come by itself.

Without appropriate cladding, any house is just a box, unsuitable for living. The quality of the interior finishing of a frame house will determine the comfort and style of your future home. Today we will look in detail at options for every taste and budget.

Before you begin, keep a few important points in mind.

Do not start decorating several rooms at once, move progressively from one room to another.
To prevent repairs from dragging on for years, make a clear plan, allotting time to each item. Cladding works small house take from one to three months. The duration depends on many factors: materials, complexity, presence or absence of a professional team.
Please pay attention Special attention rough finishing. If it is carried out poorly, the end result is unlikely to be pleasing to the eye.
One of the features of the interior decoration of a wooden frame house is the strengthening of walls in places near which there are holes for window frames.

Work order

Work begins only after electrical wiring and other utilities have been laid.
Before giving the home a finished appearance, rough finishing is carried out.
Always start with the room furthest from the entrance.
When starting work, cover the surfaces with polyethylene - this will make subsequent cleaning of the house easier.
The principle according to which you will cladding each room is “from top to bottom”. This means starting with the ceiling, then moving to the walls, and laying the floor last. However, there is one exception to this rule - stretch ceiling. If your choice fell on them, then mount the structure last.
Don’t forget to purchase special equipment to protect your skin and glasses that will protect you from getting construction debris in your eyes.
The necessary tools are a building level, a tape measure and a spatula.

Rough finish

Rough finishing is no less important than finishing or finishing. It determines how warm the house will be and how durable the repair will be.

Works include:

removal of old coatings;
ceiling screed;
laying a layer of insulation for walls;
wall cladding;
creating a “rough” floor;
leveling all surfaces that are planned to be covered;
installation of slopes.

Materials used

The construction market offers a huge selection of materials for rough and finishing interior finishing of a wooden frame house. The main thing you should focus on when choosing is the budget and complexity of the work. Let's look at the most popular options.

Materials for rough finishing:

drywall;
OSB boards;
primer and plaster mixtures.

OSB boards are considered the most progressive - they completely level the surface and are easy to install.

Finishing materials:

paper wallpaper;
liquid wallpaper;
wooden lining;
plastic lining;
ceramic tile;
decorative plaster;
glass-magnesium sheets;
flexible stone.

You can use any of the listed materials “solo”, or you can combine several - it all depends only on your imagination. About the advantages and disadvantages different types We will discuss materials for rough and finishing interior finishing of a frame house below.

Finishing options for a frame house

Drywall

Sheets of material are attached to metal profiles, which means there is no need to pre-level the walls. One more important point is the opportunity to leave free space between the wall and the plasterboard slabs. This creates freedom to choose insulation and the possibility of laying communications, including electrical ones. However, remember that if you decide to lay the wiring in this way, then it is placed in special corrugations that prevent fire. Many people choose drywall also because, due to its low weight, it does not create additional load on the supporting structure.

Work order:

Before you begin finishing the interior of a frame house using plasterboard, make markings and, using self-tapping screws, secure the metal profile.
If provided, line the walls with insulation.
Drywall is placed on the profile and secured with metal screws. Make sure that the cap “sinks” into the leaf by at least a millimeter.
Fill the space between the sheets with putty, remove excess and smooth the seams.
Take a fine grain sandpaper and sand the surface.
The rough finishing is complete, now you can start finishing.

OSB

OSB boards are another common material for rough finishing. Their installation is similar to plasterboard sheets, with the only difference being that due to the greater weight, a more reliable fastening is required.

Work order:

The slabs are attached to the wooden frame with spiral-shaped nails at a distance of 15 cm.
If you are laying OSB on the floor, then this must be done perpendicular to the joists.
Before using finishing material on top of the slabs, go over them with fine-grained sandpaper and varnish in three layers.

OSB boards are an excellent option for forming partitions in rooms, if necessary. The main difference between this material and plasterboard is its thickness, high density and strength. These qualities, depending on the goals and circumstances, can be assessed as an advantage or disadvantage. If the curvature of the surfaces is so strong that the drywall can bend, then it is better to use OSB.

Lining

Cladding with clapboard is an environmentally friendly option for interior finishing of the walls of a frame house. In addition to attractive appearance, you will also receive a particularly favorable indoor microclimate. In addition, the material has good sound insulation and excellent heat retention.

Kinds:

“Extra” is a grade without any defects, with a perfectly flat and smooth surface.
“A” - small chips and darkening in the lamellas are acceptable.
“B” - cracks and knots may be present.
“C” - the presence of darkening, resin bags, cracks, knots over the entire surface is allowed.

Paradoxical as it may seem, recently it has become fashionable to choose the “C” variety. This lining has a low cost and perfectly imitates the “vintage” style.

Work order:

Cover the slats with special bioprotective compounds against fungus and mold.
If color is fundamentally important, you want to make the coating darker or lighter, then cover it with stain or other special substances to create the desired tone for wooden materials.
The lining can be mounted on OSB boards, that is, directly on the finished wall.
There are many options for fastening this material - with nails, staples, clamps, etc. The best one will be the one that causes the least damage to the material.

Imitation of timber

This material is considered a subtype of lining. The main difference is the creation of the effect of masonry with logs. The category of “imitation timber” includes PVC, which is sometimes called “ plastic lining", since this material can easily imitate wood. Interior decoration of a frame house with imitation timber will cost less, but PVC slats do not have the advantages of wood.

Plaster and wallpaper

Plaster and wallpaper – simple materials in terms of work technique. Often those who decide to do home improvement with their own hands choose them. By finishing plaster we mean the so-called decorative mixture, we will talk about it later, but now we will focus on wallpaper.

Types of wallpaper:

Paper. For interior decoration of the walls of a frame house this is not The best decision– they are susceptible to moisture, burn easily and are not durable. However, they are often used as a temporary option to give the walls an aesthetically attractive look and save money.
Vinyl and acrylic. Wallpaper with similar characteristics that can be used for decoration. They are durable, resistant to mechanical damage and moisture resistant.
Fiberglass. An excellent option for independent use, and for painting. This is the most durable and durable of all types of wallpaper.
Photo wallpaper. Today they are used infrequently, but they are indispensable for some design solutions.

Decorative plaster

This material was once considered “elite”, but today it can be afforded by any budget. Using finishing coating decorative plaster, you can hide minor imperfections in the rough finish and give the walls an interesting texture. In construction stores you can purchase special spatulas for forming the structure of the wall; with their help, even a non-professional can use interesting design solutions.

The advantage of the material is its resistance to moisture, fire and odors. That is why plaster is often used when decorating a kitchen.

Installing tiles

Ceramic tiles are a durable and aesthetically attractive material, but require a perfectly flat surface. If you decide to tile the walls, it is advisable to use special reinforced plasterboard designed for installing tiles as a rough finish. Today you can find a lot of stylistic solutions - a natural stone, brick, wood, mosaic and much more. It is also worth noting that this finishing option is not budget-friendly and will require significant investment.

Glass magnesium sheets

Another, not yet so common, option for rough interior finishing of a frame house. This material is particularly durable, flexible and high performance characteristics. It is made of magnesium oxide and chloride, covered with fiberglass on top. Magnesium glass sheets are very light, so reinforced profiles are not required during installation. They are fastened with self-tapping screws and covered with primer or plaster before finishing.

Flexible stone

The material is made of sandstone, which is applied to a flexible fiberglass substrate. The main advantage is the possibility of installation in hard to reach places. The advantages of flexible stone include such qualities as the ability to pass air, moisture resistance, and minimal weight. It is often used in rooms with high humidity - kitchens and bathrooms. Fastening is carried out using special glue on a leveled surface.

It would seem that the house has been built. However, it is not suitable for housing, as it still resembles an empty box. In order to give the room a habitable and cozy view- it needs further finishing, both external and internal. The interior decoration of a frame house itself is divided into two stages: rough work and finishing fine finishing. Each of the stages is important in its own way and we will tell you about them in more detail.

What is meant by interior decoration?

Interior decoration of the house allows you to give the room not only a finished look, but also to bring repairs or construction to its logical conclusion. Depending on the task at hand, the actions vary. For example, if renovations were carried out inside an already built room, then it is not necessary to carry out rough finishing work.

There are several rules that you should rely on if you want to do the interior decoration of your home yourself:

The finishing of the room is carried out progressively as it progresses. It is not recommended to start finishing work in all rooms at once,
if there are several rooms, then the repair first begins in the furthest from front door room,
all finishing work is carried out after new communications, such as cable ducts, have been replaced or laid, water pipes and electrical cables,
repairs are carried out “from top to bottom”: first, work is carried out on the ceiling, then finishing is carried out interior walls Houses. Next comes the floor. The exception is the case when suspended ceilings are used in a frame house. In this case, the ceiling is attached last.
It would be advisable to cover all areas of the room not involved in finishing with thick plastic film to protect surfaces from contamination and construction debris.

As a rule, the speed of finishing is also influenced by several factors:

the complexity of finishing the room,
timely delivery of materials,
budget,
force majeure circumstances.

On average, the interior decoration of a small house with an area of 40 m2 can take a month, with an area of 60 m2 already 1.5-2 months, and the complex decoration of a multi-storey building will require 3 months of work. For the most part, the timing of the work depends on the qualifications of the invited construction team. Many companies offer turnkey frame house projects, and all work, from preparing the foundation to handing over the keys to the owners, takes no more than two months. If you want to carry out the finishing yourself, you must take into account that without the proper amount of free time, repairs can drag on for years. It is not for nothing that they say that “repairs do not end, they are suspended.”

Rough finishing of a house includes measures to prepare the surface of walls, floors and ceilings for finishing work. Such measures include removing old or poor-quality coatings, preparing and leveling surfaces, screeding floors and installing slopes on windows.

Finishing is the final stages of finishing work, when the walls and ceiling are painted or wallpapered, or finished with facing materials.

The use of natural wood lining will have a beneficial effect not only on the aesthetics of the interior, but also on the microclimate prevailing inside the room. Moreover, the combination of cedar and linden wood will reduce the frequency of headaches. Properly selected finishing materials will allow you to change the interior beyond recognition in the shortest possible time.

What materials are used?

The modern materials market offers many various solutions for every taste. Basically, it all depends on the allocated budget and personal preferences. For rough finishing, sheets of plasterboard and OSB are often used. Their advantage is that the flat surface of the sheet allows you to hide wall imperfections, such as:

curved or untreated wall surface,
the need to install an internal partition,
implementation of complex design compositions,

These materials will allow you to quickly cover the internal walls and prepare them for further finishing and finishing work. The following materials are used for finishing:

Wallpaper. The following varieties are available on the market:
- traditional paper ones. They are distinguished by their low price, but at the same time they are often aesthetically unattractive, are not resistant to moisture and cold, and are short-lived. Good for wall coverings non-residential premises, or as a temporary solution,
- vinyl varieties are characterized by increased strength and resistance to mechanical damage,
- acrylic wallpaper is good for its moisture resistance and durability,
- non-woven wallpaper made of foam vinyl is more often used as a base for applying decorative paint,
- fiberglass wallpaper is highly fire resistant and mechanical strength. Moreover, they are suitable for painting walls,
- Photo wallpapers are notable for the fact that they allow you to recreate a kind of “living” corner inside the house.

Ceramic tiles for cladding. It is good because it is highly wear-resistant and high degree decorativeness. At the same time, it requires a perfectly flat surface. It is advisable to mount it on drywall, or on a carefully leveled wall surface. The good thing about tiles is that there are many textured varieties on the market that perfectly imitate various surfaces: from brick to natural stone.

Lining made from natural wood will bring the room natural look And home comfort. In addition, wood has high heat and sound insulation characteristics. Experts divide types of lining into categories based on the quality of the final product:
- “Extra” grade means a high quality product, without surface defects,
- grade “A” allows for the presence of small darkened spots and chips in the lamellas,
- grade “B” means that there are several knots and cracks on one lamella,
- grade “C” is notable for its low price, while the wood slats often have surface defects such as cracks, knots, resin bags and dark spots.

On the other hand, when creating a vintage setting, such slats will give the room a more attractive antique look.

Plastic lining is characterized by its low price and ease of installation. Plastic or PVC are not affected biological activities, but at the same time they are not able to bring real comfort to the room. The artificiality of the material is immediately noticeable to the eye. Their heat and sound insulation characteristics are inferior to similar models made of natural wood, but at the same time advantages of PVC for finishing made it possible to ensure such popularity of the material.

Liquid wallpaper is a dry mixture of a binder and cotton or cellulose fibers. This type of wallpaper is successful in that it allows you to hide defects in the surface on which it was applied. In addition, due to its texture, liquid wallpaper is valuable for its decorative properties.

Decorative plaster is known for its fire-resistant and mechanical properties. At the same time, it is easy to apply, and the final cost is not high.

Magnesium glass sheets are quite new material. It consists of wood shavings, fiberglass mesh and chemical additives. This material is fire-resistant and moisture-resistant, while providing good adhesion to almost any applied material.

Flexible stone combines all the advantages of natural stone, but at the same time has ductility and flexibility. This material is produced in the form of wallpaper and decorative panels. It is characterized by ease of installation and wear resistance, along with high environmental friendliness and resistance to external factors.

Where does the interior decoration of a frame house begin?

Any work starts with preparatory stages. After all communication systems have been installed and laid, you must first decide on the location of sockets, switches and plumbing system outlets. Further work is carried out depending on the material used.

First you need to stock up on a tool that is in demand in any situation:

roulette,
putty knife,
building level,

At the same time, it is also worth remembering that any work requires the proper degree of protection. Glasses with polycarbonate lenses will protect your eyes from construction particles getting into them, and good durable gloves protect your hands from possible cuts.

Plasterboard finishing: features

Drywall is good because it allows you to hide all the unevenness of any surface. In this case, there is no need to perform labor-intensive leveling of the walls due to the fact that the plasterboard sheets are attached to metal carcass. The work itself on installing the sheets is carried out quickly.

At the same time, the material demonstrates another advantage: the free space between the sheet and the wall allows you to hide cable channels with electrical wiring there. Among other things, the low weight of plasterboard sheets does not create a significant load on the floors, and thanks to this, complex geometric designs, including even multi-level ceilings.

If frame house the inside is an unfurnished dwelling - then the decision to use plasterboard for interior decoration will be correct.

The installation of sheets itself is divided into several stages:

starting UD profiles are attached along the intended line using self-tapping screws,
wiring is placed in special plastic boxes or corrugated flexible pipes from PVC,

free space, if necessary, is filled with insulation,
sheets of plasterboard are laid on the profile and attached to it with metal screws. In this case, the head of the screw must be recessed at least 1 mm deep,
The seams between the sheets are filled with putty. In this case, excess material is removed with a spatula and the seams are aligned,
after that, using fine-grained sandpaper, all joints and surfaces are sanded plasterboard sheet ready for finishing and application of any chosen material.

Finishing with OSB boards

The installation of such boards itself is not much different from the process of sheathing with plasterboard, with the only difference being that OSB boards have significantly more weight. Therefore, finishing a frame house with such material will require more durable and reliable fasteners.

When laying slabs, it is worth considering the following features:

for fastening slabs to wooden frame spiral nails 50 mm long are used,
at the joints, nails are driven in every 15 cm,
Gaps of 1 cm should be left along the edges to the edge of the walls, the distance between slabs that do not have a connection should be no more than 2 mm,
OSB sheets are laid on the floor perpendicular to the joists,

After fastening, it is recommended to sand the surface of the slab using fine-grained sandpaper,
It is also recommended to varnish the slabs in three layers, with careful and natural drying of each applied layer. This coating will protect the structure of the material from possible penetration of moisture,

If you plan to cover the surface OSB boards paint or plaster, then in this case it will need to be primed first.

Plaster and wallpaper for painting

Decorative plaster for interior decoration of the house, photos of which are provided below - serves excellent option. This material will hide wall defects and unevenness.

It is good because it is not afraid of moisture and does not absorb soot and odors, which is especially valuable for the kitchen. In addition, the plaster can be washed.

Paintable wallpaper is good because it allows you to completely change the interior over time, without resorting to significant expenses. To do this, it is enough to repaint them, covering them with a layer new paint old In addition, wallpaper for painting often has a texture, allowing you to create a uniform and seamless surface.

The gluing of such wallpaper itself is no different from gluing simple wallpaper, with the difference that after gluing the wallpaper you need to give it a day before applying paint to it.

Application of lining and imitation timber

Many types of lining are interesting because they can recreate a full-fledged imitation of wood, which is especially important for country houses. The presence of wood resins will allow the timber to maintain its durability and other properties.

At the same time, the price for such material is affordable and affordable even for small budgets. Especially if you purchase “C” grade lining, which, despite the defectiveness of the surface, will bring the interior country house vintage.

The price for high-quality lining starts from $8 for a lamella 4 m long and 10 cm wide.

Wood simulants are good for their environmental friendliness and durability. Thanks to the lining heat treatment does not crack over time and does not lose its quality. Therefore, this material is still for a long time will remain attractive in the eyes of many owners of country houses who have decided to use this material for interior decoration.

Frame houses are now very popular - inexpensive and easy to build, energy-saving and environmentally friendly. Many people take up the task of building a frame house with their own hands. The next step after they are finished construction works, there must be interior decoration of the frame house. It is worth considering that each of the walls of such a house is load-bearing, and before making a hole for a window in it, it must first be strengthened.

For interior decoration of a frame house you can use wooden lining, plasterboard, PVC lining and OSB boards.

Preparation for finishing work

The process of interior finishing of the walls of a frame house is practically no different from similar work in standard structures. Before you begin finishing, you should draw up a work plan that includes the project. They should contain a list of all upcoming work, markings of fastenings and much more.

Interior decoration can be done in any way sheet material– this will reduce the time and money spent on finishing work. For example, for these purposes you can use plasterboard - an environmentally friendly and inexpensive material. It is noteworthy that its low cost is also due to the fact that it is a domestically produced material. For this purpose, you can use a block house or decorative lining.