How to attach roller blinds to a window. Roller blinds for plastic windows without drilling. How to make roller blinds smaller without a Mini frame

The choice of roller blinds is almost limitless. Having picked up suitable color, size, transparency, it remains to be determined how the structure will be fixed. This choice determines how comfortable it will be to use the curtains and how long they can be used.

The article describes various ways settings: to plastic and wooden frames windows, wall, ceiling. Each method has its own characteristics. We hope the information in this article will help you find a roller blind that will work properly and be pleasing to the eye for many years.

The roller blind can be held on a special mount or on adhesive tape. Can be fixed:

• on the window profile;
• to the slope inside the window opening;
• above window opening on the wall;
• to the ceiling.

The choice depends on the size of the canvas, the characteristics of the room, and personal preferences.

It is preferable to hang massive rolls on special fastenings that are held on with self-tapping screws. Small, lightweight structures will be held on without any problems with special adhesive tape or double-sided tape. As a rule, a package with a finished roller blind contains 2 different mounting kits, and the buyer chooses at his own discretion. When ordering by custom sizes You can choose fasteners according to the manufacturer’s recommendations.

It is advisable to screw large massive rollers to the ceiling. When mounted on ceilings, deformation of structures is less likely due to rational distribution load (the center of gravity will be under the screws, and not on the side of them). For ceiling mount a niche can be provided.

Attaching it to a slope will help to visually hide the size of a large roller. When deciding to fix the roller blind on the slope, make sure that the material of the slope can withstand the load. For example, on plastered and puttied slopes there will be no problems with fixation. Slopes made of sandwich panels will not be held by self-tapping screws.

A small window, especially without a window sill, will look stylish with a curtain attached to the wall above the window opening.

Light and compact rolls can be fixed on the window frame. This solution will allow you to make the most efficient use of the window sill surface.

IMPORTANT! When choosing a fastener, make sure that the windows open and close smoothly.

When used simultaneously roll sheets With curtains and drapes, it is important to provide sufficient space for all window decor elements.

Guides for roller blinds significantly extend their service life. They provide movement without displacement or deformation.

Mounting on plastic windows

For plastic windows, it is preferable to mount without using self-tapping screws, since later, when deciding to remove the decor, it will be problematic to disguise the holes.

If for some reason you decide to install the structure on plastic windows using self-tapping screws, our recommendations are detailed in the next section on mounting to wooden windows. The only peculiarity is that before screwing the screws into the plastic frame, it is better to drill holes in it with a drill.

No drilling on plastic profile roller blinds can be secured using spring brackets or plates, which are fixed with a special adhesive tape or double-sided tape.

Each curtain model may have individual features, which will be reflected in the accompanying instructions. Perhaps the most significant difference will be the choice of fastening depending on whether the window sash opens. Spring brackets are used for opening sashes, and plates for blind sashes. However, the principle of fastening without drilling is the same for all canvases and is as follows:

1. We prepare all the components for curtains and a pencil, and if there is no special adhesive tape included, double-sided tape.
2. The fastening elements and the surface of the profile on which the roll will be attached must be thoroughly washed, degreased with alcohol and dried.
3. We glue pieces of tape onto the fasteners, leaving a protective film on the side that will be in contact with window profile.
4. We assemble the roller blind design completely.
5. We fix it on the window with our hands, without gluing it to the tape.
6. Mark the boundaries of the fastenings (brackets or plates) with a pencil.
7. We remove the structure from the window, disconnect the roller with the canvas.
8. Remove the protective film from the fasteners and firmly press the fasteners into the marked place.
9. We fix the roller in the holders.
10. We check whether the mechanism works properly: open and close the curtain.

Mounting on wooden windows

For wooden windows, it is preferable to fasten roller blinds with self-tapping screws. They provide high structural strength. If you refuse them, there will be no sticky marks left after the self-tapping screws, which require a lot of effort to remove.

Holes in wood can be filled easily and without leaving a trace. If you decide to install roller blinds on wooden windows using double-sided tape, you can read our recommendations in the previous section.

Self-tapping installation principle:

1. We lay out all the components for the curtains on a flat surface, and make sure that the kit includes screws. If not, we get ours. You will also need a drill and a pencil.
2. We assemble by connecting the roller with the fasteners.
3. We attach the structure to the window profile, without screwing anything, and fix it with our hands.
4. Mark the holes with a pencil. They should coincide with the holes, that is, you mark them as if using a stencil.
5. We remove the structure from the window.
6. We disconnect the fasteners, apply them to the marked place, and fasten them with self-tapping screws.
7. We put the lifting mechanism on the gear.
8. We make sure that everything is working properly: we lower and raise the curtain.

Wall mounts

Roller blinds are attached to the wall only with self-tapping screws.

• We prepare all the parts of the curtain, self-tapping screws with dowels, a pencil, a level, a hammer drill (perhaps a drill will be enough).
• We assemble the structure.
• We attach it to the wall.
• Mark the locations of the holes. It is advisable to use a level. While installation on a window frame occurs almost along the edge of the frame, and it itself can be considered a level, on the wall it is recommended to align the roll and mark it according to the level.
• We drill holes according to the size of the screws. It is highly likely that you will have to use a hammer drill, especially in multi-storey building. As a rule, windows are located in load-bearing walls. They often contain metal fittings. The likelihood of hitting the fittings with a drill increases significantly if you drill a hole directly above the window where the lintel is located. Regular drill will not cope with such a task.
• We hammer the dowels into the holes.
• We screw the fasteners onto the self-tapping screws.
• We put the chain mechanism on the gear.
• We hang the roller in the fastener.
• We check the operation of the mechanism, lower and raise the roller blind.

Fastening without drilling

The method of decorating a window with roller blinds without drilling involves the use of adhesive tape. This mount is suitable for windows with plastic frames. In rare cases, the roll can be fixed to the upper slope of the window. To do this, the slope must be made of PVC.

IMPORTANT! Attaching to a PVC slope poses some problems:

• the slope may not be perfectly smooth, and a deviation from the level of even a couple of millimeters causes the entire roll to skew, which can cause damage to the edges; deformation of the slope can also occur as a result of installing a structure on it;
• the quantity and quality of adhesive tape must correspond to the weight; If you make the wrong choice, the structure may fall.

Double-sided tape can hold a roller blind on wooden window, but this is not rational. For wooden structures A self-tapping screw connection would be more suitable.

Fastening to plastic frames is described in detail above in the 3rd section of our article; to wooden ones - in the 4th.

Roller blinds are attached to the ceiling with self-tapping screws, similar to the wall:

1. We prepare all the structural elements, screws and dowels, a pencil, a hammer drill.
2. We assemble the curtain.
3. We attach it to the ceiling.
4. Mark the holes with a pencil.
5. We drill them out.
6. We hammer dowels into them.
7. We fix the fasteners in the holes with self-tapping screws.
8. We put the chain mechanism on the gear.
9. We fix the roller in the holders.
10. Let's check how the mechanism works.

IMPORTANT! It is possible to fix curtains on the ceiling only if it has sufficient strength (for example, concrete or wood). If in the room suspended ceiling, it is advisable to choose a different installation method or wait for repairs and change the ceiling.

Common installation errors

Despite the simplicity of the design, during installation there are typical mistakes. Let's describe them so you can avoid them.

• When choosing, it is important to remember that the width of the fabric is a separate characteristic, and the total width of the curtain is the distance from the edge of one connection to the edge of the second.
• Having chosen the installation position of the roll, lower the curtain and twist the window handles in all directions, open and close the windows. Very often, after installation, it turns out that the canvas interferes with the functionality of window handles or frames.
• When choosing the installation position, it is necessary to take into account the full length of the canvas so that its top does not end up being raised unreasonably high, while the bottom does not cover the window and allows light to pass through unhindered.
• When using adhesive tape, it is important to thoroughly wash and degrease the surfaces. Neglecting this rule significantly reduces the strength of the structure. She can fall at the most unexpected moment.

Conclusion

Having considered the main methods of attaching roller blinds, let’s summarize.

Intuitive choices are not enough. Need to consider:

• design features of the room in general and windows in particular;
• material of window elements.

Each fastener has its own advantages and disadvantages, they are described in the article; when choosing, it is wise to weigh all operating conditions.

It is recommended to install massive roll structures with someone close or familiar. Holding a large roller alone is difficult and inconvenient, and most importantly, you cannot see how smoothly its installation is achieved.

We hope that the article did not leave you with any questions regarding installation, and the process will give you pleasant and not time-consuming troubles.

Fabric roller shutters are well-deservedly popular among consumers due to their practicality and attractive appearance. Although correct installation Roller blinds are a little more complicated than hanging traditional curtains. However, anyone can handle it House master, who took accurate measurements and followed the instructions.

Types of roller blinds

Fabric roller shutters are a straightened fabric sheet that is wound onto a shaft placed above the window. The bottom of the canvas is lowered and raised depending on the need for shading. There are several types of fabric roller shutters on sale, differing in size, mounting location and installation principle.

Classic open

The classic open curtain system is best suited for wide openings, panoramic windows and bay windows

Mounted on the wall, ceiling, or in the opening. They move using a chain or spring mechanism.

Advantages:

• cheap, the cost depends on the area of ​​the canvas;
• close immediately large area glazing;
• take up minimal space from the room.

Flaws:

• when lowered, they interfere with opening the window;
• get dirty faster with dust;
• require drilling into walls or ceilings.

The classic open curtain system is best suited for wide openings, panoramic windows and bay windows.

UNI cassette blinds closed

Shaft with fabric roller shutter in a plastic box in color window frame

The shaft with the wound fabric is hidden in a plastic box the color of the window frame on which it is attached. The blade adjustment is controlled by a spring or chain mechanism.

Advantages:

• the frame and guides merge with the contour of the window frame; when folded, the curtains are invisible;
• the guides are installed on the glazing bead, the canvas is almost adjacent to the glass;
• does not interfere with window opening;
• do not take away the window sill area;
• can be used on roof windows;
• You can install two boxes at the same time in the upper and lower positions.

Flaws:

• the most expensive design of fabric roller shutters

MINI roller blinds open

MINI open roller blinds are mounted on a window frame or sash

Mounted on a window frame or sash. Adjustable by chain mechanism.

Advantages:

• fastened without drilling the window profile;
• the guides are a stretched invisible fishing line;
• do not interfere with window opening;
• do not take up window sill space.

Flaws:

• require careful handling;
• glue can “float” in hot weather

An interesting variety of mini roller blinds is double day-night roller blinds. This is a canvas made of alternating dense and transparent strips of the same width, unwinding in two layers. Shading is done by combining stripes in layers. The main advantage of the model is the smooth regulation of natural light.

Roller blinds day-night smoothly regulate the level of natural light

When deciding which type of roller blinds to choose for a particular room, you should take into account the interior design, size and position of the windows.

• Space of the deep window openings and window sills are usually used for decorative and functional purposes. It is recommended to install cassette roller blinds in them, which occupy a minimum of space and do not distract attention.
• Shallow openings without a window sill and narrow windows It’s better to decorate with curtains over the opening. A long cornice and a wide canvas matching the color of the walls will visually increase the size of the window.

For all types of roller blinds, it is possible to integrate an electric drive for automatic regulation canvas position.

Fastening methods, choice of fixation type

Classic roller blinds are mounted on plastic brackets using dowels driven into the base. Depending on the design, the base can be the horizontal surface of the ceiling or opening, or the vertical surface of the wall or opening.

Classic roller blinds are mounted in the opening, behind the opening to the wall or ceiling

Cassette and mini-rollo are fixed to the window profile with self-tapping screws. But more often, models with fastening without drilling are used. The shaft, guides and clamps are glued to the profile with double-sided foam tape, and on the opening doors the shaft is additionally secured with a clamp.

The position of curtains with a spring mechanism is fixed by the spring itself. When the canvas is pulled down, the spring does not hold it. As soon as the tension has stopped, the mechanism clamps the shaft in the specified position. To raise the curtain, it is pulled slightly, releasing the clamp, and then released, allowing it to rise to the desired level.

The position of the blade in the chain mechanism is held by a pair of clamps placed on the chain. To prevent the chain on the opening window from drooping, a clamp is attached at the bottom of the profile into which it is tucked.

Preparation for installation

Before purchasing roller blinds, you need to determine the dimensions of the product for each double-glazed window. The fabric should cover the glass well, but not extend beyond the frame.

• The mini-rollo canvas should be 3 cm wider than the glass. On the sash, the overlap on the handle side is 1 cm, and on the hinge side - 2 cm.
• The size of the blade in a system with U-guides mounted on a glazing bead exactly matches the size of the glass. If the glazing bead is oblique or rounded, the guides are glued to the frame. In this case, the size of the fabric is equal to the outer perimeter of the glazing beads.
• The canvas mounted in the opening should be 4 cm narrower than it. Measurements are taken at the window frame.
• The size of the curtain mounted on the wall or ceiling is determined depending on the design solution. It should be 10 or more centimeters wider than the opening, and its edge can go down to the window sill or to the floor.

All roller blinds are produced in the form of a designer with all necessary components. Buy Additional materials you won't have to.

1 - Control mechanism for raising and lowering the curtains. 2 - Brackets. 3 - Guide line. 4 - Chain stops in the extreme positions of the blade. 5 - Bracket area with adhesive tape. 6 - Magnetic latches of the bottom bar

How to install a roller blind outside a plastic window

Tools

1. Screwdriver.
2. Screwdriver Set.
3. Dowels.
4. Level.
5. Pencil.

Operating procedure

Video: installing curtains outside the window

Installation in a window opening

Tools

1. Drill or hammer drill (depending on the base material).
2. A set of drills or drills for concrete, bits (depending on the base material).
3. Screwdriver.
4. Screwdriver Set.
5. Dowels.
6. Level.
7. Pencil.

When installing a roller blind into an opening, using a spirit level is mandatory! Seemingly straight walls may turn out to be crooked, causing the curtains to become skewed, causing problems and looking unsightly.

Roller blinds installed inside the opening look aesthetically pleasing

Operating procedure

1. Assemble the roll: insert the chain mechanism into the shaft with fabric at one end and the plug at the other; Attach the brackets to the shaft.
2. Attach the roller blind to the mounting location and level it horizontally.
3. Using a pencil, mark the drilling points through the mounting holes in the brackets.
4. Remove the brackets from the shaft.
5. Drill holes, drive in dowels, screw the brackets.
6. If the model has a guide line, thread the ends of the line into the special holes in the brackets, tie with a double knot, and cut in the middle.
7. Pull the free ends of the fishing line through the loops at the ends of the plumb line.
8. Screw the fasteners for the guide line to the side walls of the opening, insert the free ends of the line into the special holes, and tighten them with the adjusting screw.
9. Insert the shaft clamps.
10. Attach the stops to the chain at the extreme positions of the blade.

How to hang a MINI open roller blind on a window frame

Tools

Installation tools will only be needed for roller blinds attached to the frame with self-tapping screws:

1. Drill with a thin drill bit.
2. Screwdriver.
3. Screwdriver Set.
4. Pencil.

The procedure is the same as when attaching a roller blind to a wall, with the difference that a hammer drill, bumpers and dowels are not needed. Most MINI models are fixed without drilling the window profile.

Operating procedure

1. Remove the curtain and accessories from the packaging.
2. Assemble the roll: insert the chain mechanism into the shaft at one end and the plug at the other, attach the brackets to the shaft.
3. Attach the shaft to the frame, center it relative to the glass.
4. Use a pencil to mark the outer sides of the brackets.
5. Remove the brackets from the shaft.
6. Degrease the mounting points. Attach pieces of double-sided foam adhesive tape to the profile according to the marks.
7. For rolls mounted on sashes, connect the brackets to the clamp.

   Installation of MINI roller blinds

8. Glue the brackets to the tapes, pressing the parts firmly against the profile.
9. Insert the roll into the brackets.
10. If the model has a guide line, thread the ends of the line into the holes in the brackets, tie with a double knot, and cut exactly in the middle.
11. Insert the roll into the brackets with the canvas facing the window.
12. Insert the shaft clamps
13. Pull the free ends of the fishing line through the loops at the ends of the fabric plumb line.

    Roller blinds for installation on the window sash without drilling are additionally fixed with a clamp

14. Stretch the fabric to the bottom. Attach the fasteners for the guide line to the bottom profile with double-sided tape. Insert the free ends of the fishing line, tighten them with the adjusting screw
15. Attach the stops to the chain in the extreme open and extreme closed positions of the blade.
16. For curtains on a sash with a chain mechanism, glue the chain retainer to the profile at a height of 10 cm from the window sill.

On windows of small height, you can do without a guide line. And so that closed curtain did not move away from the window in the ventilation position, magnetic latches should be used. They are mounted on the lower profile of the frame and on the plumb line of the canvas.

To open such a curtain, do not forget to first disconnect the magnets and then pull the chain.

If you want to remove roller blinds from a PVC profile, you will face the problem of cleaning the plastic from glue. Take a household hair dryer and a cloth soaked in solvent. Warm up small areas glue with a hairdryer at maximum temperature and immediately wipe them with a rag.

Cassette roller blinds with U-shaped guides merge with the window profile

Operating procedure

1. Remove the curtain and accessories from the packaging.
2. Degrease the glazing bead and profile using the alcohol wipes included in the kit or a rag soaked in alcohol.
3. Remove the protective film from the U-shaped profile and, pressing firmly, glue it onto the vertical beads.
4. Remove the back of the box from the protective film.
5. Release 10–15 cm of fabric from the box.
6. Bring the box to the upper profile of the frame, thread the ends of the plumb line into the guides.
7. Glue the box to the frame.
8. Remove the box from the stuck mounting angles. Press the corners firmly against the profile for security.
9. Place the box in place.
10. Attach limiters to the chain to allow the curtain to fully open and close.
11. Hang a decorative weight on the bottom loop of the chain.

Installing roller blinds yourself at home or in the office is not that difficult. It will be much more difficult to choose from a huge variety of fabrics suitable for the interior.

Roller blinds are very functional and convenient way decorating a window opening, allowing you to quickly adjust the amount of light entering the room through the window, on a hot summer day to shade the room from direct sun rays or close the window in the evening.

But the question often arises about how to attach a roller blind to a plastic window without damaging its structure.

Attaching roller blinds to the wall (ceiling)

If you are faced with the task of completely closing the window opening, hiding everything that is on the windowsill, the best option will use roller blinds mounted on the wall or ceiling.

Usually curtains roll design They have a short length, covering only the window opening, with a small margin for the space above the window opening and 10-15 cm below the window sill level. This is quite enough for them to fully fulfill their utilitarian functions - to shade the room or protect it from views from the street.

There are two options for mounting roller blinds: on the wall and on the ceiling.

In the first case, when mounting on a wall, you will have the opportunity to use side guides, which are fixed on both sides of the window opening. The guides along which the lower weight bar of the roller blind slides do not allow the canvas to move away from the window opening during a draft or gusts of wind, presses the canvas more tightly to the wall in which the window is located and provides better shading, since there is practically no gap between the wall and the curtain .

Another significant advantage of this method of fastening is the ability to use a roller blind with a spring mechanism that ensures its automatic winding onto the drum.

When purchasing, take into account the size of the window opening. The roller blind is 30-40 cm longer than the height of the window opening and 10 cm wider than it.

Since the weight of the structure is not great, it is enough to drill into the wall with a hammer drill or impact drill holes D 6 mm. Such small holes, if you decide to get rid of roller blinds, will be easy to repair acrylic sealant. They will be almost invisible.

When attaching a roller blind to the wall, it is necessary to take into account the fact that when lowered, it will fall approximately in the middle of the window sill of the plastic window. He must be free from indoor plants and other items. Otherwise, it will be difficult to use roller blinds at full length.

If you want to preserve the flowers located on the window and not move them, then it is better to fix the roller blind on the ceiling. The place where it will be necessary to drill holes for fastening is determined using a plumb line, which is brought to the level of the edge of the window sill.

The use of guides and a spring mechanism for winding curtains in this case is impossible.

Fastening roller blinds in a window opening

Fastening roller blinds directly to window opening– more popular way their placement. It allows you to use the entire area of ​​the window sill.

Depending on the design of the curtains - open or closed (cassette), the distance from the upper edge of the window frame in which the mount for roller blinds will be mounted is determined. Modern roller blinds allow two mounting options - using self-tapping screws and using double-sided foam tape or glue for PVC structures.

Most people prefer tape. It avoids damage to the structure of the plastic window profile. Faster and more convenient, does not require absolutely any additional tools.

If you plan to decorate the entire window opening with a wide roller blind (for non-opening windows), its width should be 3-5 mm less than the width of the window frame so that when lowering the curtain, the weight bar does not touch the slopes. It should be noted that this method of placing roller blinds is not very convenient, since directly on PVC profile It will not be possible to place the winding mechanism - the window handle will get in the way. Therefore, the winding drum will have to be 70-80 mm away from the plastic frame. You will have to use elongated L-shaped brackets that will provide the necessary gap between the window and the curtain.

Another option is to use “Mini” roller blinds - structures that are mounted directly on the window sash and allow you to fully use the windows - tear them off without lifting the roller blinds, tilt them to the “ventilation” position.

Features of fastening roller blinds of the “Mini” design

“Mini” roller blinds come in both an open design – with a winding device not covered by a casing, and “cassette” – in which the curtain fabric is covered with a casing made of aluminum or plastic. There is no significant difference in the mounting methods. The only difference is the price. Open structures are cheaper than cassette ones.

When choosing roller blinds, you need to pay attention to the design of the glazing bead that your plastic window is equipped with. It comes in two types - straight and beveled. The dimensions (width) of the roller blind will depend on this.

If the glazing bead is straight, the width of the roller blind must exactly match the width window glass. The length of the rolled torus is the height of the window glass. (UNI type 1). If the glazing bead is beveled, the width of the roller blind is determined by the outer edges of the glazing bead, as well as the length. (UNI type 2).

The methods of attaching roller blinds to opening and non-opening window sashes are somewhat different. L-shaped brackets are used for fastening to the opening sash, which hook onto the top edge of the window frame and snap onto it.

The non-opening curtain uses flat fastening strips that are held in place only with double-sided tape or glue.

Before starting installation, the side holders are removed from the roller blinds, freed from packaging; the curtain should be oriented so that the winding mechanism is located at the edge of the curtain facing the slope. Brackets or mounting strips are glued to the removed holders. After this, the holders are put on the winding drum.

The assembled roller blind is applied to the upper edge of the window frame and the place where the brackets come into contact with the frame is marked with a pencil. Before final installation of the brackets with holders, the plastic frame must be cleaned of dust and degreased with alcohol or gasoline for lighters.

(Under no circumstances use acetone or other solvents that can damage the PVC profile!).

The side holders are again removed from the ends of the winding drum.

After this simple manipulation, all that remains is to remove the protective paper from the surface of the double-sided foam tape and, in the case of an opening window sash, hook the L-shaped brackets to the upper edge of the window frame and press down until it clicks, at the same time press the tape tightly to the surface of the PVC profile.

A “cassette” or an open drum with a curtain is inserted into the glued holders (don’t forget to put a chain on the winder gear first) and the functionality of the mechanism is checked. Guides are glued along the glazing beads. A weight bar is inserted into them at the bottom of the curtain fabric. Installation complete!

Let's sum it up

Roller blinds are a very convenient, inexpensive option for decorating a plastic window, highly functional, and much cheaper than horizontal metal blinds. Their installation takes very little time and can be done by anyone not knowledgeable in construction.

Roller blinds have become quite popular with the advent and widespread distribution of plastic windows. Their demand is explained by the ease of operation and maintenance, as well as their very original and aesthetic appearance. appearance. This type of curtain is especially convenient and practical for balcony windows, since for this room with already small area Ordinary curtains hung on cornices are not very suitable. Although they don't "steal" usable area, but visually make it significantly smaller.

Many people really like this method of closing windows, but they are stopped by the fact that they will have to drill holes for fastenings in the window sashes, which will violate the integrity of the metal-plastic profile. Manufacturers of roller blind systems have foreseen this point and have developed special fastenings that can be easily assembled and installed without the help of a specialist armed special tools. Installing roller blinds on plastic windows yourself without drilling the frame profile is quite possible, and even quite simple. To find out how to install it correctly, you need to understand at least a little about the design of this system.

What are roller blinds

Roller blinds are a structure consisting of a special fabric and a movable holder shaft, with which you can conveniently straighten, roll up and fix the curtain.

The fastening system of many models does not involve the use of screws and perforation of the window sash. The functioning of the system is based on the operating principle of the so-called “Roman blinds”, but is adapted to modern materials and fasteners.

Roller blinds can be used either separately or in combination with “classic” curtains

Roller blinds can be used as an independent accessory or in combination with traditional curtains. These useful window accessories will help preserve expensive fabrics from fading under the influence of ultraviolet rays, and if they are tastefully matched to the curtains, then this “ensemble” can become an interior decoration. This type of curtain fits organically into any designer style interior They can be made in plain pastel neutral shades or have some kind of pattern.

In addition, the canvas can be translucent or act as a protective barrier from the sun, completely blocking its rays from entering the room.

The convenience of the system also lies in the fact that the fabric in the fastenings can be replaced with another one. For example, in the summer you can install a solar curtain, and in the winter replace it with a brighter one, made in bright “summer” colors, which are so lacking at this time of year. Such a curtain will lift your spirits and create a favorable atmosphere in the room.

The curtain is compact, as it is mounted in the window opening, and due to the fact that it is located close to the glass, there is maximum protection from light entering through it. Therefore, even in a room located on the sunny side, you can create a comfortable environment in the most extreme heat.

Roller blinds resemble horizontal ones, but their advantage is that they do not accumulate dust and do not create gaps. In addition, the canvas can be easily cleaned using soft fabric And detergent. Curtains don't look as formal as blinds, which helps create a cozy feel in the rooms.

Video: roller blinds as an element of room interior decor

Types of roller blinds

Roller blinds, which can be installed without drilling window frames, can be divided into several varieties. To pick up suitable model, you need to consider the characteristics of all options.

Mini roller blinds

Mini roller blinds are the most affordable type of this interior accessory. They are very easy to install and operate. The shaft on which the canvas is wound is open, and the curtain itself stretches along the entire perimeter of the glass under the influence of a weighting agent installed along its lower edge. To prevent it from “rinsing”, use simple fasteners, which are attached to the frame with double-sided tape. The simplest of them are magnets.

Mini roller blinds

This type of curtain can be called the most popular, due to its low price and the ability to be installed on any window. The design is easy to clean and compact in size.

Cassette type curtains

The cassette design differs from the “mini” one in that the shaft with the blade attached to it is located in a compact box. Therefore, when folded, the curtain is almost invisible and is also completely protected from ultraviolet rays.

The box can be matched to the color or texture of the frame. The material from which this element is made can imitate white plastic or wood texture.

Mini cassette type curtains

Combined versions called “mini cassette” are also produced. They are installed on individual window sashes and do not interfere with their opening and closing. The canvas is also rolled into a box, which is installed on the top bar of the sash. These roller blinds, in turn, can be divided into two types:

• UNI 1 - this type of construction is designed for wide glazing beads, since the curtain guides are attached to the inside of them, along the entire perimeter of the glass, and the frame is installed directly on the top bar of the window sash. In this case, the canvas is as close as possible to the surface of the glass unit.
• UNI 2 differs from the first type in that the guides are installed on the outer part of the bead on both sides of the glass. A curtain box is attached to the top strip of the window sash.

Additional criteria for choosing roller blinds

In addition to the classification mentioned above, roller blinds are divided into double and single. For double curtains, for example, there is an option called “day-night”. Their canvases consist of transparent and dense horizontal stripes, alternating with each other, and when the right combination is made, they allow you to achieve the desired effect of illumination of the room.

Curtains with day-night effect

When dense stripes are combined with each other, a striped “daytime” curtain is obtained that allows light to pass through. If one of the canvases is lowered or raised, then the dense stripes overlap completely or partially transparent ones on the other, and the curtain becomes “night”.

If you want to create twilight in the room during the daytime, the stripes can be combined in such a way that thin gaps are formed between them to allow light to pass through.

If you don’t want to see dark stripes on the window during the daytime, you can purchase an option where white stripes alternate with transparent ones.

Roller blinds are also divided into three types of blackout:

• Transparent fabrics that completely transmit light and imitate tulle. During the daytime, they block the view of the premises from the street.
• Shading sheets, translucent - they reduce the intensity of sunlight and diffuse bright light, making it soft and not causing discomfort.

Sun-protective or light-proof canvases can completely block the flow of light into the room. This option is perfect for a room or one located on the south or southwest side of the house.

A special material “Blackout” helps to achieve these effects, which is also used in the manufacture of day-night roller blinds.

The overwhelming number of roller blind models produced are opened and closed manually, most often using a special chain connected to the shaft gear. However, there are other types, quite expensive, in which an electric drive is installed, and control can be carried out using a remote control. These automated curtains are produced with two or one sheet, but always have a cassette design.

Roller blind sizes

In specialized stores today you can find a fairly wide range of roller blinds, but manufacturers mass-produce these accessories for windows standard sizes. If double-glazed windows are made according to individual projects and have very large or, conversely, small sizes, you will have to look for the opportunity to place an order. For existing manufacturing companies, this is considered common practice, and craftsmen take on such work without any problems.

On sale you can usually always find curtains with a length of 1600, 1750, 2200 mm, and a width from 300 to 1400 mm, which basically corresponds to the dimensions of standard sashes and frames. Problems may arise with the width, since the sashes are sometimes made narrower. Therefore, before purchasing curtains, you need to take correct measurements. The implementation of this process will depend on the selected type of roll structure.

Measurements for mini curtains

• The first step is to measure the width of the glass, plus the width of the glazing beads. Then it is not the height of the glass that is measured, but the entire window sash. It is better to write down the results.

• Next, you need to determine the location of the control mechanism. It is usually installed on the hinge side of the window.
• The next step is to select the type of fastening of the curtain to the window (it may differ - for an opening or a fixed sash).

Measurements for cassette curtains

This system requires special attention when measuring, since the curtain will be installed exactly in the frame opening. In this case, you need to pay attention to the shape of the glazing beads that hold the glass unit in place:

• If the beads have a right angle, then the height and width of the glass are measured between them. This is the size of the curtain that needs to be purchased or ordered.
• If the glazing beads are beveled, then the width and height of the glass are measured by the larger distance between them.

Measurements for mini cassette curtains

• For a system of mini-cassette roller blinds type UNI 1, dimensions are taken according to diagram “a” shown in the drawing, that is, the size of the glass without glazing beads.
• For UNI 2 type construction, the dimensions are taken from the glass, plus the width of the glazing beads.

Roller blinds are an excellent addition to high-quality metal-plastic windows.

How to install roller blinds on plastic windows without drilling the frame profile

Installation technologies various types roller blinds each have their own individual characteristics. The only thing that unites them is the absence of the need to perforate the window frame to secure the structure.

Illustration
	The first thing you need to do is prepare all the components for the curtains. They should be laid out on the table and, leaning on technical description, assemble into the desired structure. In this case, we present parts designed for opening and fixed windows. Both installation options will be discussed below.
	The photo clearly shows details that look like hooks - brackets; they will hold the roller with the curtain on the window sash. There are also parts that have a semicircular shape on one side. One of them contains round hole- a groove, and in the other the protruding part is a tenon. The same mating elements are located on both sides of the roller. These parts must be installed on the roller - accordingly, the groove is aligned with the tenon on each side.

Installation of a mini roller blind on an opening window sash

Illustration	Brief description of the operation performed
	To install a structure that is mounted on an opening window, you will need the following parts: the roller blind itself on the roller, brackets, chain lifting mechanism, fixing clips and special double-sided tape.
	The brackets will not just hook onto the window sash - they must additionally be fixed to it using double-sided tape. Therefore, first of all, the areas on them where the tape will be glued need to be thoroughly degreased and dried. Then small pieces of tape are glued onto them.
	The next step is to connect the brackets to tongue-and-groove holders using a special fastener.
	Then, a chain mechanism is put on one side of the roller, and brackets with holders are installed.
	Next, fitting is carried out - assembled structure is put on with brackets top part open window and is aligned, that is, the correct position of the curtain on the window frame is determined.
	Then you should mark exact location brackets. It is needed in order to tightly fix the brackets with double-sided tape after degreasing the surface.
	Degreasing the outer side of the window frame strip is carried out using special means or regular alcohol. Other organic solvents are strictly contraindicated! After completing this process, the surfaces are allowed to dry thoroughly.
	Next, the protective film is removed from the tape glued to the brackets. The brackets are placed on the top bar of the open window sash and pressed firmly against its surface.
	It is necessary to snap the clamp provided on the bracket until it stops.
	The second bracket is installed and fixed in the same way.
	Next, on the side where the spike with gear is located on the bracket, a chain mechanism is mounted that will open and close the curtain.
	After this, a roller with a curtain is inserted into the brackets fixed on the window. This is done very carefully so as not to damage the plastic parts.
	On this photo You can clearly see how tightly the brackets should fix the roller to each other.
	The last thing to do is to make sure that the design is working by checking the opening and closing of the curtains, transmitting the necessary force through the chain.

Installation of mini roller blinds on a blind window sash

Since the window does not open, hook brackets are not suitable for installing roller blinds on it. Therefore, in this case, you will have to use special plates with grooves to snap holders onto them - side brackets with a gear.

Illustration	Brief description of the operation performed
	Since the window does not open, hook brackets are not suitable for mounting roller blinds on it, so in this case you will have to use special plates with grooves to snap holders onto them - side brackets with a gear.
	Double-sided tape is glued to the plates degreased with alcohol or a special compound.
	After this, the side brackets are attached to the plates.
	IN finished form they look like this.
	Then, a chain mechanism is installed on the gear, and the brackets are inserted into the shaft.
	Next, the design is tried on the window, and the desired position of the curtain is marked on it. The brackets will be secured only with tape to the top strip of the window frame.
	The place where the plates with side support brackets will be glued must also be degreased very well.
	Then, the protective film is removed from the tape. The brackets are installed in the marked places and pressed firmly.
	After this, a chain mechanism is put on the roller with the curtain on the side where the gear is located, and the roller is mounted on the window in fixed brackets. The last step is to check the operation of the mechanism - to do this you need to unfold and fold the curtain several times.

Description of the installation process of cassette roller blinds

Illustration	Brief description of the operation performed
	In this case, the set of roller blinds includes guides. Often the manufacturer himself already applies special adhesive tape to all elements, and during installation all that remains is to simply remove protective film and stick the elements to the marked places. This type of curtain is sold assembled, that is, the curtain is already fixed in the box, so installing such a structure is quite simple.
	Box cassette version roller blinds are fixed to the top strip of the window sash. But first of all, it needs to be degreased and marked on it. These actions are necessary to ensure that the box stands perfectly horizontally and exactly in the center of the window glass, since in the future the curtain must fall into the guides fixed vertically on both sides of the glass unit.
	The next step is to try on the box on the degreased area. Then the protective film is removed from the adhesive tape located on its back wall, and the entire assembled assembly is firmly pressed against the top bar of the window sash.
	Next, you need to glue the guides. They, depending on the type of curtain (UNI 1 or UNI 2), are mounted according to outside glazing bead, or along the inside, with one side in this case pressing against the glass. In this case, the installation of curtains of type UNI 2 is presented, when the guide runs along the outside of the bead.
	If tape is already installed on the guides, then the parts are first tried on, aligning them with the box. If the manufacturer does not provide adhesive tape, then it must first be glued (after degreasing the surface) to the plane of the guide that should be adjacent to the surface of the sash.
	Then, 30÷40 mm of the protective film is removed from the tape.
	After this, the guide is installed in the box and to the bead.
	Holding the guide in place right hand, with the left hand, carefully and gradually remove the protective film from the entire strip of tape.
	When all the film has been removed, the guide is firmly pressed against the bead. In the same way, install the second guide along the glazing bead on opposite side glass unit.
	Having secured the guides, the curtain fabric is placed in them, as it will move inside them. The next step is to put a locking ring on the chain mechanism, which will prevent the chain from slipping along the gear.
	And the last stage is to test the curtains for opening and closing.

As you can see from the above options for fastening curtains without drilling, installing a cassette type is even easier in some ways than a “mini” one, but both options are quite accessible for self-installation. The main thing is to carry out the process slowly and as carefully as possible. If the markings are carried out correctly, then installing all the elements will not take much time and effort.

Find out a few available options, from a new article on our portal.

Well-known manufacturers of roller blinds

A few words need to be said about the manufacturers of roller blinds, of which there are quite a lot on the Russian market, so the range of these products is quite large. It is impossible to list all popular brands, but some of them are worth talking about.

Almost all manufacturers of roller blinds produce products with standard parameters, and also make them to order according to the dimensions provided by the customer.

Thus, products from the following manufacturers are offered to Russian consumers:

• Inspire is a subsidiary of Leroy Merlin, whose production facilities are located all over the world, including in Russia. This manufacturer makes curtains from natural materials, so their price is quite high. However, despite this, they are popular among buyers due not only to their environmental friendliness, but also to the high quality of workmanship.
• "Lotari" is a Chinese manufacturing company that makes its products mainly from polyester. Such curtains have affordable price and therefore are quite in demand by consumers. However, as you know, products from China are not always of high quality, so it’s worth thinking about when deciding to save money.
• "Eskar" is a Russian company offering roller blinds different types made from synthetic materials. The company has been working in the domestic market for a long time, producing high-quality products of various colors and parameters. During its activity, it received excellent reviews from customers.
• "Uyut" - the company has been operating since 1986 and specializes in interior decorative products. It produces, among other things, many models of roller blinds from various materials, serving as decorative decoration home, and as a functional interior accessory, for example, for sun protection or “day-night” type.
• “New Leader” - this company, in full accordance with its name, occupies a leading position in the Russian market in the production of roller blinds and roller blinds. Having great experience work in this direction, this manufacturer guarantees customers the quality of its products.
• Decor City is also Russian company, which has been working in the production of curtains for quite a long time - since 1993. The products of this company can be made from both synthetic and natural materials. Accordingly, models can be in a wide price range, but the manufacturer, in any case, guarantees the quality of its product.

Catalogs of most manufacturers with models, sizes, descriptions of design and functionality, colors, price levels, if desired, can be found on the Internet. Very often, company websites offer the ability to place an order immediately. Well, as the reader has already seen, it is quite possible to install it yourself.

Prices for roller blinds

Roller blinds

Video: example of installing roller blinds on a metal-plastic window.

Roller blinds for plastic windows– beautiful and practical option sun control decoration of plastic windows. They are a single piece of fabric that is wound into a roll using a special mechanism.

Roller blinds have a spectacular appearance and are easy to care for. They occupy a minimum of space, leaving the window sill free. And thanks a huge number types and shades of fabrics, roller blinds will harmoniously fit into any interior.

Roller blinds can be used in conjunction with traditional curtains or as independent window decoration. For the manufacture of sun protection structures, fabrics of various densities are used. You can simply dim the sunlight or completely darken the room. To increase wear resistance, fabrics are treated special compounds– dust-repellent, antibacterial, water-repellent.

Our company offers roller blinds for plastic windows from the manufacturer in a wide range at an affordable cost:

• MINI systems without a box and guides;
• UNI cassette roller blinds for standard plastic windows;
• UNI 2 cassette systems for windows with glazing beads of complex shape;
• cassette roller blinds UNI 2 with spring;
• roller blinds Zebra MINI;
• cassette roller blinds Zebra UNI;

Roller systems for MINI windows

MINI roller blinds are optimal for small windows - they are a simple, effective and inexpensive solution. They have a small diameter shaft and are installed directly on the window sashes. They can be installed on both fixed and tilt-and-turn sashes.

The MINI system is easy to install; fastening can be done both with and without drilling windows. However, it will not be possible to create a complete shading effect in the room with the help of these curtains, since daylight may seep in from the sides.

Buy roller blinds for plastic windows in Moscow cheaply.

Cassette roller blinds UNI

Cassette roller blinds UNI – sophisticated design solution, which will harmonize with the interior in any style. The design consists of a box containing a shaft with fabric, and two flat guides.

The box is attached to the top bead using self-tapping screws or glued with double-sided tape. The guide strips are glued to the side beads of the window sash.

The price of such products is slightly higher than that of mini-variants.

Cassette roller blinds UNI 2

UNI 2 cassette systems are usually used for windows with rounded, triangular and other complex glazing beads. They are also suitable for sashes with shallow (less than 1 cm) glazing beads. The cassette and guides are placed outside the light opening, so one product can be placed on a sash with a horizontal crosspiece. In addition, this design prevents the fabric from sticking to the glass when it fogs up.

Buy roller blinds for plastic windows