Wine connoisseurs always have several bottles of the sunny drink at home. They know that precious vessels must be stored correctly, then their contents will preserve their properties for a long time. Make your own wine racks. Such designs allow:

• Correctly, horizontally, place bottles of drinks in a city apartment or private country house.
• Set up a special place for tasting.
• Centralized storage of wines.
• They become a real interior decoration.

PVC pipe products

The simplest and original version Shelves for wine are constructed from plastic pipes. For work you will need PVC pipes, the diameter of which is slightly larger than the circumference of a wine bottle.

It is enough to cut the material into pieces and fasten them with glue, twine or other means. And if you place such pipes inside a small bedside table, you will get an excellent minibar of your own. The design method will depend only on your imagination, capabilities and interior.

Pallet wine shelves

Wooden wine storage shelves are the most popular. These can be either expensive large pieces of furniture or small stylish fixtures, the size of which is limited to 2-3 small boards. The use of transport pallets as a material for products provides the opportunity to create unique natural furnishings at virtually no cost.

Classic wine bottle shelf

A small shelf of 3-7 bottles will not be enough for a true connoisseur and collector of wines. Moreover, the number of copies is only growing over time. The best solution in this case, there will be a classic do-it-yourself wine shelf, which can be used alone or as part larger design, consisting of similar elements. It will organically fit into the kitchen decor and can become part of the living room set.

Preparing for work

The main materials for creating the shelf will be plywood and boards. You need to purchase:

• sheet of plywood 0.5-1 cm thick;
• 2 boards 50x50 mm, 2 m 50 cm long;
• strip 25x80 mm, length 61 cm;
• strip 25x50 mm, length 2 m 50 cm;
• 4 cm nails;
• pocket hole screws;
• wood glue or carpentry glue;
• wood filler (putty);
• 120 grit sandpaper.

To complete the work you will need the following tools: tape measure, square, pencil, pocket hole jig, drill with a set of drills, automatic nail driver, grinder, clamps. Also, do not forget to use protective equipment: special glasses and headphones.

Wine shelf in this project has a length of 45 cm, a depth of 40 cm, a height of 88 cm. In total, it holds 32 bottles. By adding similar products, you can assemble a large wine cabinet, equip it with additional doors, drawers, accessories for glasses, etc.

• Before you begin, review the action plan.
• Take all necessary precautions.
• Prepare parts and assemble the product on a clean, level surface that is free from defects or debris.
• Use straight boards.
• Drill holes before attaching parts with screws. This will allow you to use the glue more effectively for a stronger hold.
• Immediately wipe any excess glue off the surface of the wood. This is especially important if you plan to finish painting or varnishing the product.

Start preparing the parts for making the shelf. Use a circular saw or order cutting of elements in a workshop, providing a list:

• 2 blanks of side parts 25x290 mm, 86 cm long each;
• 4 side ends made of timber 50x50 mm, 86 cm long;
• 4 parts for the upper and lower ends of the sidewalls 25x50 mm, 29 cm each;
• 1 blank for the bottom of the shelf 25x290 mm, 38 cm long;
• 3 elements of finishing of the shelf and top support 25x50 mm, 38 cm long;
• 1 top piece 25x290 mm, length 45 cm;
• 1 blank for top finishing with parameters 25x50 mm, length 45 cm;
• 1 piece of upper front upholstery 25x80 mm, length 45 cm;
• 3 parts made of thin plywood 35x85 cm;
• 7 pieces made of thin plywood 35x38 cm;
• 1 piece of thin plywood 44x88 cm.

Before assembling the product, remove roughness and burrs from the ends of the parts, use sandpaper or grinder.

Work plan

1. Using a special jig, drill pocket holes along the side and top edges of the shelf sides for attaching the top and side strips. Apply glue to the joints of the short parts and install the screws. The top and bottom strips are overhead and are attached flush to the edges.
2. Apply glue directly to the side ends of the workpieces. Install the side bars on the pocket screws, which perform the main supporting function of the legs. Check the results with the images below.
3. Install strips along the edges of the lower part of the shelf (using screws and glue).
4. Prepare pocket holes between the bottom edges of the sides. Apply wood glue and install the bottom shelf with screws. Do not forget to promptly wipe off the glue protruding from the seams.
5. Prepare pocket holes at the ends of the 38 cm long planks. Install the piece at the top rear of the structure with glue and screws as shown in the diagram.
6. In the same way as you assembled the bottom shelf, do top part designs. Attach the side trim strips.
7. Pre-drill pocket holes through the jig. Apply glue to the top edges of the shelf. Gather the parts screw connection. See the image for how to properly combine the parts.

Start making the separator grid, which consists of 3 tall vertical and 7 horizontal pieces.

1. To ensure that all the details are the same, use in the following way. On one of the 3 and 7 workpieces, make markings for cuts (following these diagrams). Then fold all three (seven) thin plywood pieces together so that their edges line up exactly. Secure the position of the elements using clamps. Make cuts with a circular saw or jigsaw. Their width should be slightly (1 mm) wider than the thickness of the plywood used. Do not make the cuts too long - the plywood may break during use. It is enough to make them 1-2 cm larger than half the board.
2. Assemble the separator grid from the obtained parts.
3. Install the plywood structure inside the shelf.
4. Attach a plywood wall to the back of the shelf. Use glue and nails for installation.
5. Fill screw holes and uneven areas with special filler. Leave the product to dry.
6. Sand it down wooden surface, remove excess putty. At the end of the process, wipe away dust and other contaminants.
7. Apply a layer of primer to the product.
8. Way finishing choose at your discretion. We recommend using 2-3 layers of stain. It will beautifully highlight the wooden pattern, darken the product, and improve its technical characteristics. Please note that coating wood with any finishing substance should only be done on a dry surface.

3500 0 0

How to make a wine cooler for your home with your own hands - 3 simple methods with step-by-step explanations

Do you collect wines and have decided to get furniture to store bottles? I suggest three simple instructions, according to which you can assemble a wine cabinet for your home with your own hands. Despite the simplicity of the methods, the finished products will look no worse than factory furniture.

How to set up a wine library

The following requirements apply to the arrangement of a wine library, namely to the selection of furniture:

• Bottles should not rest on the bottom. Place the container upside down or on its side, so the wine will retain its taste longer;
• Free access to bottles. Wine bottles need to be turned over every couple of months, so furniture is made with easy access to the collection in mind;
• We make furniture with reserve. Collecting wines is not limited to a certain number of bottles, so make cabinets with a reserve.

Method 1: Wine bottle rack

This is a very simple and at the same time functional device for a small wine library. The design consists of a straight base and an arc. The perforated arch is designed to hold standard 0.7 liter bottles, while the straight base with slots is designed to hold utensils.

Illustrations	Assembly instructions
	Preparation of parts for gluing the arc. From a board 20 mm thick we cut 6 squares of 10 × 10 cm. Each of the prepared squares, as shown in the photo, is ground along 2 edges at an angle of 20°.
	Gluing the arc. In the center of the prepared squares we drill holes with a diameter of 35 mm (the outer diameter of the bottle neck). Then we coat the beveled sides of the squares with wood glue and glue them together. The photo shows how to tighten the arc when gluing. Having connected the parts, temporarily glue them with tape. After the glue sets, remove the tape.
	Making the base. We measure the distance along the outer edges of the made arc. Cut a piece of board to this length. We mark 4 equidistant points on the board, which we use as centers for holes with a diameter of 35 mm. We make parallel slits from one edge of the board to the drilled holes. We grind the workpiece.
	Final assembly. We connect the previously made arc with self-tapping screws to a straight base. We make 2 grooves longitudinally along the arc, 5 mm wide and 5 mm deep. Fill the groove with wood glue and drive in strips of plywood of suitable thickness. After the glue has dried, the excess plywood is cut off and the workpiece is sanded. After this, the product remains to be hung on the wall and used for its intended purpose.

Method 2: Cabinet made from scraps of plastic pipes

This instruction will certainly be of interest to those readers who have recently completed the installation of a sewer system, because there are likely to be scraps of pipes with a diameter of 50 and 100 mm left. As a last resort, you can buy plastic pipes, because you only need a few of them and they are inexpensive.

Illustrations	Assembly instructions
	Pipe preparation. Plastic pipes of different diameters based on different bottles cut into pieces 40 cm long. One edge of the pipes is cut at a slight angle, as shown in the photo. After the pieces are cut, sandpaper remove burrs from the edge of the cut.
	Mounting holes. On a flat surface we lay out the pipes in the same way as they will be located in the finished cabinet. Using a marker and colored cord, we mark the holes through which we will connect the pipe scraps into the finished structure. Drill holes according to the markings made.
	Painting. We prime the prepared pipes and then paint them. To create the desired effect, paint some of the pipes with one color, and some with another. Do not overuse a large number of colors, 3-4 colors will be enough. We carefully paint the internal volume of the pipes. If the painting is of poor quality, the coating will gradually wear off when the bottles are removed.
	Cabinet assembly. To assemble the prepared elements, we use bolts and nuts of suitable sizes. By inserting the bolts and tightening the nuts, we connect all the workpieces together. The assembled structure is installed vertically on a flat surface. If desired, unobtrusive loops can be attached to the inside of the structure, as for hanging shelves, and the device for storing bottles can be hung on the wall.

Method 3: Vegetable drawer cabinet

Today it is fashionable to make furniture from shipping containers; for example, tables and chairs are made from pallets everywhere. So why not make a wine bottle organizer cabinet from a utility drawer.

To make this craft you will need a modern box with handles with dimensions of 50x30x30 cm and plywood 9 mm thick.

Illustrations	Assembly instructions
	Organizer blanks. From plywood we cut 2 pieces 49x30 cm and 3 pieces 29x30 cm.
	Assembling the organizer. We mark two long pieces of plywood into four equal transverse strips 12 cm wide. From the edge of the piece we make cuts 1 cm thick and 15 cm long. We mark three short pieces for three stripes and also make slits 15 cm long and 1 cm thick. We collect the prepared pieces of plywood into organizer grids.
	Cabinet assembly. We insert the assembled organizer grid inside the box and the craft is ready for use. If the organizer is cut out and assembled carefully, the structure will fit into the drawer like a glove. If the grate in the box is loose and loose, you can secure it along the edge with several dots of hot-melt adhesive.

Let's sum it up

Now you know how to make simple but stylish wine bottle furniture. If you still have questions about the proposed instructions, ask them in the comments to the article.

February 26, 2018

If you want to express gratitude, add a clarification or objection, or ask the author something - add a comment or say thank you!

An ordinary cabinet or household refrigerator will not work. Although many people uninitiated in the intricacies of storing and tasting elite types of alcohol believe that one or two bottles are quite capable of spending some time in unsuitable conditions without losing much in quality, it is difficult to agree with such an opinion. Of course, in a short period of time spent next to other products, the wine will not deteriorate completely, however, this will not have a positive effect on its taste: a properly preserved drink reveals the bouquet more fully, forms a more subtle and complex taste and ultimately delivers to the taster More fun. If we treat this issue with disdain, then even the drink highest category will quickly turn into unremarkable and unmemorable, its potential will not be realized.

Moreover, the greater the number of true wine connoisseurs, the more popular among them special equipment and furniture, whose main purpose is to preserve this noble drink, gains. Such accessories help ensure proper storage conditions and greatly facilitate this process. In addition, properly selected or racks will most likely become original decoration for the kitchen or any other room where you decide to place them. Over time, equipment that harmoniously fits into the interior becomes an indispensable part of it, without which in the future it will be difficult to imagine the corresponding room.

Situations when it is necessary to organize a place for storing a relatively small amount of wine deserve special attention. Arranging a wine cellar or even purchasing a specialized wine cabinet in this case will be unnecessary - they will, for the most part, stand idle in vain. For small wine collections, high-quality wine shelves are better suited. And, although some wine connoisseurs prefer to buy ready-made ones from manufacturers, the idea of ​​making wine shelves with your own hands remains no less popular. This method has a considerable number of advantages: first of all, making it yourself is much more profitable than purchasing a finished product. Also, when buying wine shelves in a store, you will have a choice only from the models presented in the assortment, but when assembling it yourself, you are free to decide for yourself which one appearance will have the accessory you create.

Make your own wine racks

Many people give up the idea of ​​​​making shelves for storing wine with their own hands, fearing that working with such a complex piece of furniture, as they consider it, will require highly specialized skills and special tools. This reasoning is only partly true: to assemble the simplest shelves from boards, you do not need any rare skills. Of course than more experience in working with wood behind the master's shoulders, the more complex and original shelf will come out of his hands, but simpler options can be done even by someone who rarely picks up tools.

In this case, the tools themselves will need the most common ones, which can probably be found in any home. Among them are measuring and control devices, such as a building level and tape measure, drill or screwdriver, saw, jigsaw, as well as a plane and sandpaper. This standard set is enough to relatively quickly make a simple wine rack or shelf with your own hands, which will in no way be inferior to store-bought samples, and in some ways will surpass them.

Also, when making shelves with your own hands, you should definitely take into account where it will be placed, and the point here is not only in the harmony of the appearance of the shelves with the overall design of the room. Thus, it is unlikely that you will be able to fit an accessory that is too bulky in the kitchen, but in this case there are many unusual options for the design of the shelf and its placement. It would be wise to place the wine storage area close to the countertop, for example, directly under it, so that you can reach it without leaving this place - this will come in handy when cooking, when all the ingredients must be at hand. If the kitchen interior does not prevent the shelving from being placed more freely, then a shelf located in plain view will become a wonderful decoration of the room.

Another situation is that you do not plan to keep the shelf in any one place, but are going to move it from one room to another. In this case, you can make something like a basket for wine bottles from wood. It will store wine no worse than on standard shelves, but such a set will not cause problems during transportation, and it will look much more attractive and unusual. By installing several similar baskets in the kitchen or living room, you will add originality to the interior of the room and emphasize its advantages with the help of the chosen design.

In the case when elegant appearance does not play a dominant role, but your primary task is to put things in order in storing wines and quickly make them yourself simple shelf for wine, you can prepare a place to store drinks from just one board installed vertically or at an angle to the wall. In such a base, grooves for bottles are cut out - right in the center, in the form round holes, or from above, in the form of hollows. This accessory is suitable for storing both a small amount of wine and a larger collection; such a shelf, without taking up much space, will help you avoid getting lost in different varieties drink and preserve its unique taste.

To store wine, you can't get by with just shelves - you'll also need air conditioning to maintain the storage. desired temperature and humidity. When ordering on our website together with a racking system, you will receive a guaranteed 5% discount on the selected climate system and be sure that your drinks will always be stored in suitable conditions.

For true connoisseurs of European cuisine, not a single meal is complete without a glass of expensive wine. This drink has long gained wild popularity and still does not give up its leading position. Such a noble product requires a special approach to its storage. Many true connoisseurs collect very valuable and rare specimens in their collections.

Today we're sharing 13 amazing DIY ideas for decorating wine racks in your home.

Built-in wardrobes

Obviously, one of the most convenient and attractive ways to store your wine collection is to integrate special shelving into the finished space. This way you don't have to look for extra space in your kitchen. The Room Interiors portal suggests equipping a regular sideboard for dishes with shelves. Thus, in one half you can store drinks, and in the other, sets of glasses and cutlery.

Another option, equipped with kitchen set. All you need is to equip one of the modules with special compartments and a grille, as the designers from Live Laugh Decorate did.

The following DIY project will appeal to those whose kitchen space is so limited that it seems impossible to allocate even a little free space. You can get a small vertical shelf. It is very narrow and therefore does not take up too much space, and you can vary the height yourself. If desired, you can make it from the floor to the ceiling.

A stunning wine rack option. All you need is to make a few round holes in the plywood sheets and fasten them together. This shelf can be used as a partition to divide space. If you paint the inside unusual color, it will become a stylish and fashionable interior detail.

Wall racks

Not everyone is lucky enough to have extra space for a built-in wine rack. However, everyone will definitely have a free wall. So why not use the empty space for a minibar? This project from Shanty 2 Chic was brought to life using a few pieces of wood and large hex screws. Light wear and marked title stickers give the shelf an elegant look, turning it into an antique piece.

An unusual option is offered by the designers of Hart’s Desire Photography. Such wooden shelf allows you to store the drink at an angle of 45 degrees. It looks a little dangerous, but in fact, the design is very reliable!

If you prefer versatility and multifunctionality in everything, then the project from The Kurtz Corner is what you need! By attaching special threaded trays to a regular hanging box, you will accomplish two tasks. This will be a shelf for storing both wine and glasses.

Our next idea comes from Erin's Lane/Etsy. Everything is extremely simple: you only need a solid wooden board and a few cast iron bolts from railway. We combine all this, and a wine rack appears in your home. rustic style! A quick but very stylish DIY project.

Pipes

The idea may seem strange, but a wine bottle perfectly follows its cylindrical shape. So why clutter the space with a million shelves and racks when wine can be stored in space-saving tubes of the right size? For example, equip the cellar with a wall made of cylindrical building blocks. Now they can be purchased at any hardware store. A terracotta clay tube creates an ideal microclimate for storing a delicate and capricious drink.

Turn your wine rack into a real work of art! A budget alternative to brick blocks will be durable PVC pipes. Create an amazing composition from elements of different diameters, just like the Adventures in Creating designers did.

Drainage pipes are also great for storing your favorite wines. The main thing is to firmly fasten them together, then your drinks will be completely safe. Also, Adventures of an Almost 40 Year Old Intern proposes to equip a similar coffee table. With this you will create additional surface for arranging things or accessories.

If you are looking for the most simple and economical option, then you won’t find anything better than a shelf made of postal cardboard tubes. Agree, this project from Bob Vila looks very original and worthy of attention!

Case stand

Our latest DIY project is a true work of art! DanMade's handcrafted shelf for HGTV is made from whole piece natural wood and stakes. All that remains is to find appropriate place for such a stunning accessory.

Another original idea

And so, now you have as many as 13 ideas for equipping a wine storage. If you have your own original ideas, don't forget to share them in the comments!

Categories:
Places: .

If you are a healer of European cuisine, then you must love treating yourself to a glass of expensive wine with your meal. This drink has gained popularity and is not losing its leading position. Such a noble product requires a special approach to storage. True connoisseurs collect collections of rare and valuable specimens. If you decide to get one, then you should take a closer look at how to make a wine rack with your own hands. A description of the work stages will be presented below. You can easily make structures for this purpose yourself.

If the kitchen space is limited and has little free space, you can get a vertical shelf from floor to ceiling. To carry out the work, you will only need to make a few holes in the sheets of plywood and fasten them together. This design can be used as a partition to divide space. If you paint the inner surface of the product, the shelf will become a fashionable and stylish interior detail. But you can buy a shelf in a store, but some home craftsmen prefer to make such structures themselves. Among other things, when carrying out work, you can use available materials and tools. Thus, the design will cost almost free.

Preparing tools

If you need a wine rack, prepare the following tools:

• electric jigsaw;
• grinder;
• pencil;
• roulette;
• building level;
• screwdriver;
• drill;
• circular or hand saw.

Preparation of materials

At a hardware store you can buy dowels, drills for plugs, self-tapping screws, a wooden pallet, and sandpaper. The latter will be needed for surface treatment.

Work technology

If you are making a wine shelf, then it can be based on old pallet. To do this using circular saw it must be sawed, part of the structure separated to make a shelf. Its height should be approximately 50 cm. The next step is to prepare the boards for the base. Using a nail puller and a hammer, you need to tear off two boards, but the main thing is not to break them. Three small blocks should be prepared to separate and secure the bottom. The bars are cut with an electric or manual jigsaw, and the length of these blanks should be slightly greater than the width of the pallet boards. They should extend slightly beyond the base.

Grinding and working with holes

The wine rack should look attractive, so the beams and boards must be sanded. This will rid the product of burrs and irregularities. In this case, you should use sandpaper, the grain size of which can vary from 120 to 200. You can also use grinding machines. Holes for glasses should be made on one of the boards. Trays are usually 100 cm wide. The holes should be standard, but they can be made in such a way that they exactly match the size of your glasses. At standard sizes For dishes, one hole should be marked, 11.5 cm from the edge of the board. Then three more holes should be marked, 10 cm apart. There should be a distance from the edge of the board ranging from 4 to 4.5 cm in width. Similar marks must be made on the other side.

The wine rack must have holes that can be made using a drill or drilling machine. Markings should be made from the edge of the drilled holes to the edge of the board, cutting off unnecessary parts. The resulting corners are processed with sandpaper.

Carrying out the assembly

Wine shelves can be made from different materials, however, wood will be the cheapest. If you used pallets, then after completing all the steps described above, you need to assemble the bottom of the shelf. The glasses will be located along the length. Parts of the bottom must be fixed with self-tapping screws; holes must first be made in these places with a drill. After the bottom can be assembled, it should be strengthened to the base. At the same stage, everything needs to be fixed with self-tapping screws, having previously made holes for them. In this case, you should exclude the possibility of the board splitting, otherwise you will have to look for a replacement.

After assembly, the product should be cleaned with sandpaper and covered with stain. Once the wine racks are made, they can be hung on the wall. To do this, you should use it to mark points on the wall. Using the marks obtained, you should make holes with a drill, and then insert dowels into them. Self-tapping screws with a length of 2.5 cm are screwed into the latter. The hats should not be screwed tightly, because the shelf will be removable.

Alternative shelf options

DIY wine shelves can be made using simpler technologies. For example, a wine cooler can be made from wooden box. It installs on steel legs, and holes should be made in the bottom for bottles. Between the rows there is a shelf that will separate the bottles from each other. The simplest solution is a wooden board that is attached horizontally to the wall. You can make holes in it using a special drill. The main subtlety is that the holes for the necks need to be drilled at an angle, and the circles should be the same. The wooden plank is cleaned, if desired, painted and varnished.

You can make your own wine rack; the simplest options are to use water pipes, or rather, what is left of the bathroom renovation. Using adapters, the pipes are connected to each other in a zigzag structure. To prevent bottles from rolling off the surface, the pipes should be bent at a certain angle.

Conclusion

You can save space by using a wine bar that will be located under the table. To do this, you can use reinforcing bars that are bent in the shape of hooks.

Elegant shelves for storing wine bottles will provide you with a lot of free space in the kitchen, and will also give you an aesthetic way to place them! The location of such stands can be numerous - on a table, on a wall, under a chair or in a kitchen cabinet. Today we want to show you some examples of photos that you can take with your own hands!

Let's make a small shelf ourselves!

The small wine bottle holder is ideal for those who like to enjoy a glass of wine at dinner or when entertaining guests. Or, as an option... You are a collector of wine bottles... Surely, you have a separate place for them somewhere in the basement... But in your collection there are a couple of the most luxurious and beautiful bottles! How can you leave them far away in the basement? After all, you, as a collector, will want to look at such beauty endlessly... In this case, make a stand for wine bottles for them with your own hands! And enjoying this beauty will be at least doubly pleasant!

Before making such a stand, you must prepare all the necessary materials and tools. First you will need two plywood sheets with a size of about 26x38 centimeters. Secure them with loops. And at a distance of about 30 cm, attach a cord to fix the distance. Tools you will need: ruler, pencil, string, hole drill, and 150-grit sanding paper.

Making holes for bottles!

Before cutting holes, you need to measure them! We make marks and cut them out. In total we should have 12 circles. After that, we sand the edges with sandpaper. If you wish, you can paint the resulting stand.

Installation of hinges

After the work has been done, you can safely begin installing the hinges! For greater stability, it is recommended to use at least 2 loops.

Fastening the rope

The last step is to secure the string to securely hold the position of our shelf. Drill small holes, thread the cord and tie knots.

Creative shelf made of pipes and leather

Elegant wine cabinet made of wood and leather

You can make a beautiful shelf with your own hands from pieces of leather and pieces of wood that were left over. Which will fit perfectly into the interior of a dining room or living room. Wood is an excellent material for creativity. you can use suitable paint or apply an aging effect. In addition, a stand for wine bottles is an incomparable gift that everyone will appreciate!

Creative Ideas for Storage of Wine Bottles

You can make a minimalist wine rack using plywood and leather strips. Treat yourself or a wine lover with a chic handmade gift. This wine rack easily mounts on a wall, table or cabinet. Decorate your interior with this chic shelf!

We make it with our own hands!

To work you will need: sheets of plywood, smooth wood nails, wood glue and leather strips. As tools will also be required drill and sewing machine.

Shelf made of wood and metal plates

If you don't want to spend too much time and effort creating a bottle holder, then you should use this idea! This shelf is made of board and metal hooks. The most important thing is to choose creative hooks.

Installation Guide

Bottle shelf on the wall

An original idea for a country house

From several wooden planks You can make a wine rack with your own hands, which is ideal as decor for a country-style kitchen. Ready product You can decorate to your taste and color.

Practical shelf

Wall mounted wine racks will give your kitchen an elegant look. If you are making a shelf with your own hands, then pay Special attention on the strength and stability of the bottles so that they cannot fall.

Wine rack made of wooden pallets

Wooden pallets can be used to build almost any piece of furniture! With the help of a few wooden boards you can easily build simple stand for wine bottles with shelves for bottles and glasses. This stand can be easily mounted on the wall, which will a great option for small apartments.

A practical idea for wine lovers

Wine racks with space for glasses are very practical because they replace your Kitchen Cabinet and combine the function of wine. 🙂

Make a simple DIY holder

All you need: colored tape, bushings from paper towels and felt. This device will be a good addition to the kitchen. After all, the stand can be used for all different bottles.

Wine rack (stand) for horizontal storage of bottles in the interior of the room

Products on the page:

Initial sorting By popularity By rating By newness Prices: ascending Prices: descending

Wine Bottle Rack from Exclusive Wooden Products

Small wooden stand cylindrical in shape with a hole for the neck of the bottle. The manufacturer offers stands made of oak, ash and alder. The design is interesting in that it does not need to be attached to the surface on which it stands. The stand does not fall due to the counterweight of the bottle inserted inside.

Wine bottle holder from Exclusive Wooden Products makes you think about the laws of physics

By adjusting the depth of installation of the neck into the hole for greater stability, you can even install an empty bottle of your favorite vintage wine in the stand. If desired, you can use a laser to engrave your company logo or any other image on the stand. The stand comes with a bag made of thick natural fabric, on which a similar logo can be embroidered. A great gift option!

If desired, you can use a laser to engrave your company logo or any other image on the stand.

Hanging wine rack Cioso Blomus

The Cioso hanging wine rack was designed by the Flöz Design team for German company Blomus. It is made from of stainless steel and is designed for 8 standard bottles. An excellent solution to the wine problem for a loft-style kitchen!

The hanging wine rack Cioso Blomus will fit perfectly into the interior of a loft-style kitchen

Creative Umbra wine racks

A charming creation by designer Dennis Lin - fancy, complex wine racks made of circles of different diameters, into which absolutely any wine can be placed without any problems!

The creative Umbra wine rack feels light and unstable, but keeps your valuable bottles safe

Designer David Quan presented an equally interesting version of a rack for five bottles in the form of an outlandish flower made of transparent acrylic.

Wine bottle rack in the shape of an outlandish flower made of transparent acrylic is transparent and light

Hanging wavy wine bottle rack from Design My World

The idea of ​​creating this graceful wavy wine rack dawned on the designer while he was admiring the stream of wine pouring into a glass. Simply brilliant! To make it even more decorative, you can place bottles of white wine on one side and red wine on the other. A kind of wine yin-yang... It’s not for nothing that they say that the truth is in wine! Although many people mistakenly look for it at the bottom of the bottle...

The Flow Wine Rack from Design My World will decorate your kitchen without taking up much space.

Make wine bottles the highlight of your kitchen interior!

The wooden wine rack from Potterybarn harmonizes well with the entire decor, matching it in style.

The hanging wine bottle rack from Jakob Wagner evokes surprise and admiration for the designer's courage

Kitchen design for a connoisseur of good wine from Ernestomeda will allow you to keep the entire collection in sight

The calm design of the wine rack from Potterybarn will not disturb the harmony of any style.

Design devices for storing wine bottles are so diverse that anyone will choose a wine bottle rack to suit their taste.

Creative wine rack from Umbra resembles a fancy folded ribbon

The TRELLIS Rack System wall-mounted wine rack from Modern Cellar attracts attention with its nobility and clear lines

The FLOAT Wall Shelf Mini wine rack from Modern Cellar reliably protects fragile bottles

The wine cabinet from Potterybarn has an impressive and respectable appearance

Wine rack from Potterybarn is decorative and functional

The wine cabinet from Potterybarn has a lightweight, elegant design and is suitable for classic and Provence-style interiors

Wine rack from Potterybarn gives an impression of solid nobility

The wine rack from 2B.group will best fit into a loft-style kitchen interior

The original wine rack for a music lover has an unusual design, which guests will appreciate

A bottle holder will be an excellent accessory in your interior. After all, this useful thing for the home, which will serve as storage for wine bottles.

All guests and friends will be happy when they come to your house to see neatly stacked bottles that are easy to get and offer to you.

Making such a stand with your own hands is quite simple. In addition, it can be used not only in the apartment, but also for...

Materials for manufacturing may vary. Use available materials, such as tin cans, cardboard, wood, fabric, and so on.

We will show you several options on how to make a stand for wine bottles with your own hands and hope that you choose the one that suits you.

Bottle stand made from newspaper tubes

In every home you can find many newspapers and unnecessary magazines. We will use them in our master class.

For a DIY wine stand made from newspaper tubes we need:

• newspapers or magazines;
• stick for mini-kebabs;
• ruler;
• stationery knife;
• pencil;
• cardboard;
• brushes;
• scissors;
• clothespins;
• paints and varnish.

We take a newspaper page and unfold it, cutting it into four parts. Next, take a kebab stick and begin to wrap strips of newspapers onto it.

You should end up with tubes with an uneven, beveled end. We fold the wound tubes for the future stand of bottles side by side.

To do this, it is better to make a square outline of books so that they do not roll away and fit tightly to each other.

Every housewife buys canned corn, peas and other products. Jars should not be thrown away. You can make a pretty cute bottle holder out of them.

Moreover, even a woman can easily cope with this.

We need it for a wine bottle holder following materials:

• 6-12 tins;
• can-opener;
• aerosol can;
• glue;
• fabric or cardboard;
• gloves.

The number of jars may vary, it all depends on how many tiers you want to make in the stand.

How to make a bottle stand from tin cans with your own hands

Wet the jars to remove all labels. After this, wipe them well or leave them to dry for a while.

Using a can opener, cut out the bottom and bottom of each jar. To prevent the remaining sharp edges from injuring you, you need to squeeze them in the opposite direction or carefully remove them altogether.

For beautiful decor DIY wine bottle coasters, take a can and spray paint on one inside of the can first, then turn it over and apply paint on the other side.

Don't forget that the tin can has ribbed edges, so apply the paint carefully while rotating the future stand.

After the paint has dried, you can begin outside. Color it in the same way.

An amazing idea would be wine stand with your own hands. It's quite simple and unusual.

Now we need to assemble our stand for wine bottles. To do this, secure each can with a clamp or clothespins and apply super glue between them.

You can give it different shapes, guided by your imagination. A stand for wine bottles made from tin cans must withstand the number of planned liters, so you should choose good glue.

DIY cardboard bottle stand

This stand looks no worse than store-bought. Only you can save money and make it from existing materials.

You will need:

• 2 paper towel rolls;
• scissors;
• ruler;
• glue gun;
• plumbing tape of any color;
• felt;
• spray glue.

You need to take the sleeve and cut it in half, using a ruler to determine the center.

It is better to cut with a stationery knife or a wood knife, pressing lightly on it, but not overdoing it, so as not to bend the future shelf for the bottle.

Do the same with the second bushing. This way you will have 4 cells for wine bottles.

Use a hot glue gun to attach all the pieces of the stand. If you don’t have much space in your apartment, you can use two or three cells or add more.

Take plumber's tape and stick it around the edge of each cell, but without touching the internal ones.

To make the stand more colorful, use felt. Cut a piece that will fit tightly to the surface of all cells.

Apply glue to the underside of the fabric and attach it to the bottle stand with your own hands, pressing well.

Remove excess felt with a knife only after it has dried. For perfection, you can cover the entire bottom surface with colored tape.

Whatever bottle stand you choose, it will definitely decorate your interior and will be very useful for any occasion!