How to sew a sofa cover with your own hands: step-by-step instructions. Step-by-step instructions for sewing a sofa cover with your own hands Do-it-yourself corner sofa cover patterns

Now many craftswomen sew textile decor for their homes on their own, preferring it to purchased products. But few people decide to take on the task of making a cover for an armchair or sofa. It is believed that such interior decoration is quite difficult to make with your own hands. And the main difficulties lie not in the sewing technology, but in the construction of the pattern.

The cover is convenient because it can be easily removed, washed and put on the sofa.

Indeed, patterning a cover for a sofa or chair may seem quite complicated, since it consists of many parts. It is even more difficult to think through all the elements of the future design. But if you understand the scheme for constructing such a pattern, then there should be no difficulties when working.

Preliminary stage of work

First, you need to decide on the future appearance of the cover, and only then start creating a pattern. Ideas can be gleaned from publications dedicated to home decor. And there is no need to be intimidated by the apparent complexity of the design. Most likely, the pattern of the cover itself will be a combination of several rectangular elements. In Fig. 1 ideas shown similar products, which decorated the same piece of furniture.

Please note that the first 4 models were not sewn. They are simply a draped piece of fabric. You can also follow this path and first form the future cover on your sofa, and then start cutting. In this case, you may not need a pattern.

Figure 1. Options for covering a sofa with a cover.

When choosing fabric for a cover, give preference to thin, easily draped materials: viscose, rayon or satin. Such cases are not designed for long term services, but they are also cheap. Therefore, you can change the decor of the room at your discretion. If you want to sew a dense, tight-fitting cover, then you should pay attention to dense fabrics for furniture. It can be gabardine, velor or tapestry. Such products will last much longer.

To sew such a product, you usually buy about 5-5.5 m of fabric of standard width (from 1.4-1.5 m). But only a ready-made cover pattern will give you a more accurate material consumption. Therefore, you should first build a pattern, and only then go to the store. In addition to fabric, you will need the following:

sewing machine;
tailor's scissors;
a set of special feet for a sewing machine;
basting thread and needle;
pins.

Don’t forget about the tools for taking measurements and creating a pattern. Stock up on a large ruler, a tailor's measuring tape and a square. In addition, you will need paper for the pattern. It makes more sense to take graph paper, but it can be replaced with wrapping paper. Use masking tape to attach individual sheets of paper together. Then you will receive a sheet of the size you need.

Return to contents

Taking measurements from the sofa

Figure 2. The process of taking measurements from a sofa: 1 – length of the sofa with hem allowance, 2 – width of the sofa with seam and hem allowance, 3 – depth (thickness).

The easiest way is to rip out the seams of the old sofa cover and simply copy them. But this is not always possible. In this case, the pattern is built anew. In this case, you need to accurately take all the necessary measurements.

To calculate the required amount of material required to sew a cover, measure the furniture, one by one taking its dimensions at the longest and widest point of a particular element. To all the values obtained, add 7-10 cm for seam and hem allowances and 15-20 cm for the edges that will be folded inward. To make the cover easy to put on and take off, a flap-shaped closure with buttons can be provided in the middle of the back of the back, with ties on the outer sides of the armrest or on the rear edges. It is wiser to immediately take into account all the allowances when creating the pattern for the covers. This will help you stitch a large item correctly.

To measure the sofa you need to take the following measurements:

Dimensions outside armrest.
Dimensions of the back of the sofa.
Dimensions of the front side of the sofa seat.

When taking measurements, make sure that the measuring tape is not stretched. Pull it from point to point with a slight slack in the middle. Otherwise, the cover may turn out to be too narrow and cramped. It makes more sense to add 1 cm to all the measurements obtained. This will give the necessary space.

Return to contents

Newbie mistakes

Some beginning craftswomen have problems not so much with constructing a sofa pattern, but with taking the necessary measurements. The pattern of the cover is quite complex, but at the same time geometrically correct design. And to build it, you need to know exactly where each part is located. How to accurately take the necessary measurements is shown in Fig. 2.

Figure 3. An example of a finished pattern for sofa covers.

Measurement of the outer side of the armrest. It starts from the seam connecting the inner part to the outer one. Please note that the inner piece (labeled a-b in the picture) wraps around the outer part of the armrest. The front part (o-p) is an insert that connects the outer and inner parts. On straight armrests, this insert also runs along the top of the element, where the inner and outer parts are adjacent to it on both sides.

Back length (s-s) is measured at the widest point of the back. The length of the back is equal to the distance from the top seam to the floor. Next, you need to decide on the sofa seat. Its front side is sometimes shaped like a frill. Its height is measured from the bottom of the sofa to the top seam (u-l). This element is sewn to the bottom of the seat and hangs down to the floor. Its width is equal to the distance from one edge of the seat to the other (v-w). And it has no duplicate parts. But sometimes such a strip can extend onto the side parts (w-x). In some models it can continue on the back side. At the same time, it can be laid in simple or bow folds.

Add 10cm for the back clasp and 15cm for the side clasp. The zipper should be strong enough and match the density of the material you choose. When creating a pattern, it is necessary to take into account the reserve that will be needed to fit the fabric into place. When calculating material consumption, you need to take into account the fabric that will be needed to cut the seat cushion covers.

Return to contents

Making patterns for covers

An example of a finished pattern is shown in Fig. 3.

Naturally, you can specify your own measurements and adjust this pattern to suit your needs. Then all you have to do is cut the fabric. But if such a drawing is too complicated for you, then there is 1 more way. Create a pattern for only the back part of the back, and cut all other elements “on the fly”, focusing on this blank.

It is worth noting that the fabric consumption with this method is very large, since all parts are cut out with huge allowances (at least 15 cm on each side).

Therefore, it is wiser to first make a pattern for the cover from cheap fabric, such as chintz, and then use it as a pattern.

But this method there is one undeniable plus - the pattern of the cover will fit on your sofa like a glove.

Don't forget to label all the pieces on the wrong side, otherwise you will get them mixed up. Mark the position of seams, darts, gathers and folds. Be sure to indicate the direction of the grain thread and the middle of the part. These lines will help you connect different elements. Use a dotted line to mark the position of the seams and their intersection points.

Fold the workpiece in half lengthwise and mark the direction of the grain thread. Then unfold it again and pin it to the back of the chair. Now place the fabric over the front of the back and straighten it so that no wrinkles form. Bring the edges of the front and back pieces together and pin them together. Cut out the necessary element from the material (without removing it from the sofa).

(No ratings yet)

Nowadays, the fashion for furniture covers has returned again. By covering upholstered furniture, you not only keep it in pure form, but you can also inexpensively change the design of a sofa, armchair, as well as the entire room. Well, now we’ll make a cover for corner sofa with your own hands.

Peculiarities

There is a huge variety of slipcover patterns that can turn your furniture into a work of art. Sewing new clothes for furniture from high-quality and beautiful fabric, you can completely change it.

Modern upholstered furniture is one of the most expensive furnishings. Therefore, consumers began to use coating for it more often. Thus, protecting the set from wear and tear and changing the aesthetic appearance of the room.

The main thing is that sewing a cover will cost you much less than reupholstering your favorite sofa or buying a new one. It will be enough to spend money only on the material. To sew new clothes for upholstered furniture with your own hands, you need to make the right pattern, on which the success of your work depends.

Textile

According to the advice of the designers, it is better to choose a fabric color that is slightly darker than the interior of the room. Brave people can use several bright pieces of fabric, or create some kind of pattern. If you want to start sewing for the first time, it is easier to take a plain material.

Considering the design of upholstered furniture, fabric for sewing must be purchased in excess so that clothes for the furniture can be worn freely. It is not easy to calculate the exact proportions of upholstered furniture, so do not try to sew a cover that will fit the sofa, highlighting the bend of the corner.

Also, if you have any embellishments planned (ruffles, bows, frills), you will need a little more additional material. If the product turns out to be not entirely successful, problem areas you can decorate with additional decorations. You can also sew small pillows, as shown in the photo.

Calculation

To correctly determine the dimensions of the fabric for sewing a cover for a corner sofa, add up the dimensions of the length and width of this furniture, and multiply the resulting amount by 2. To correctly calculate the dimensions of this furniture, it is better to divide it into small sections.

To sew new clothes for a corner sofa you will need at least 8 m of fabric. Therefore, everyone decides for themselves what cost of fabric to choose. It will be quite difficult for inexperienced seamstresses to calculate how much fabric needs to be purchased.

If you are sewing a cover for this piece of furniture with your own hands, it is better to use a plain material or with a small pattern. We do not recommend using striped fabrics: they will have to be cut in one direction, which will significantly increase its consumption.

Pattern

For a corner sofa, which has a rectangular shape, the pattern is much easier to make. It is necessary to carefully measure all parts of the furniture, then transfer all dimensions to paper in a reduced form. Finished drawing With correct sizes transfer to fabric. When cutting fabric, do not forget about seam and hem allowances, as shown in the video.

There cannot be any special rules for cutting clothes for a corner sofa, since each piece of furniture has its own sewing options. However, there are recommendations that will help you avoid some mistakes when creating clothes for furniture.

It is better to draw the pattern with large allowances. After you do the fitting, the extra centimeters can be trimmed off;
Do not try to make a completely accurate drawing, since it is very difficult to make a completely accurate calculation. Try to sew the cover so that it fits freely on the furniture. This will be enough to appearance your furniture has changed;
To hide problem areas in your work, use a variety of decoration accessories. They can not only decorate your work, but also perfectly complement the design of the room. May also be useful different shapes pillows that will not only hide bad spots, but will also find the most useful use;
For a sofa with leather upholstery, thin foam rubber can be additionally stitched inside the cover. This is in case you have pets that can scratch your skin.

Let's sum it up

Sewing a cover for your sofa with your own hands will bring you great satisfaction. Do not hesitate, the updated furniture, as well as the interior of your home, will delight you and all family members.

Upholstered furniture is an expensive thing. Therefore, it is not surprising that there is a desire to preserve its purity, novelty and beauty for as long as possible. Optimal solution- sew a cover. However, it can be used not only to protect a new purchase from dirt and damage, but also to improve old furniture.

Apart from purely functional purpose, covers play the role of decorative elements, helping to fit sofas and armchairs into general style interior

Features of manufacturing covers

Any housewife who knows how to hold a needle and has experience in handling dense fabrics can take advantage of the knowledge of how to make a cover with her own hands. Of course, you can use a sewing machine, but mostly you will have to work by hand. Also an important and necessary skill will be the ability to make patterns. Suitable ready-made diagrams usually difficult to find.

How to sew a cover for a sofa? The simplest option– use an old sofa cover. It must be cut into separate pieces and transferred to the selected material. This good way sewing skills training.

But not every housewife has such an opportunity. Therefore there is another method. You can take some cheap fabric and try out the master class you like on it - there are plenty of them on the Internet and in specialized magazines.

After you check the sizing and how the cover will look on the sofa, you need to cut out the product and use it as a sample, taking a more expensive material.

As you can see in the photo of hand-made covers, the simplest solution is to put a cover on a sofa without armrests. Such furniture is used in interior design of cottages or children's rooms.

Instead of armrests, you can use small rectangular pads. In this situation, the shape of the cover will be extremely simple, and the decoration will be frills or flounces sewn along the bottom edge.

How to sew

Covers are sewn not only for sofas and armchairs. If you want to add solemnity to the atmosphere, you can sew elegant chair covers. The first action that needs to be performed is freezing. Draw your sofa or chair and break it down into rectangular pieces.

If the piece of furniture is small, then it will be enough to use one piece of material for both the back and the seat. In other cases, you will need to cut out several elements.

The second step is to draw a pattern according to the measured dimensions. Don't forget to add seam allowances (5 - 6 cm) for each piece. Although this is not a creative process, everything must be done carefully and accurately.

The third step will be to baste all parts of the pattern. Next, you need to check how the product will look on the furniture, how tight it is, and whether any adjustments are needed. After this, you can sew all the details on a sewing machine.

Material selection

Do-it-yourself fabric for a sofa cover must meet the following requirements:

Wear resistance.
Resistant to stains.
Easy to care for.
Aesthetics.
Dense texture.
Environmental friendliness.
Practicality.

In addition, it should be pleasant to the touch and not cause allergies.

For sewing covers and capes, rich, expensive fabrics are most often chosen, for example, velor, flock, jacquard, cotton, microfiber. Each has its own characteristics.

The housewife must decide for herself which fabric is preferable. But it is still believed that optimal options are cotton material and wool.

Model selection

Models of sofa covers amaze with their diversity. There are products that completely hide pieces of furniture, making them seem flying and airy. They will be appropriate in the following styles - classic, English, modern.

If you are a lover of practicality and functionality, then you will like throws made to fit snugly on a sofa or armchair.

Here you will not see any decorations, such as bows, flounces and ruffles. But you will definitely like the pockets located on the side of the case and on the armrests. You can put glasses, a newspaper, a book in them.

In addition to furniture, capes can be sewn for various things - laptops, TVs, etc. A phone case for your hand looks interesting. Experiment and imagine. And you will create a truly unique decor.

Photo of do-it-yourself sofa covers

Sometimes old furniture or car seats spoil the interior with their rather shabby appearance. You don’t always want to throw them away, or you simply don’t have the opportunity to buy them. new furniture due to the high cost. The best way out In such a situation, sewing covers for a comfortable sofa, armchair or seat will become necessary. This will not only give new life furniture, but will also save a significant amount of money.

Where to start sewing covers?

Update old furniture with the help of new cases, anyone who has it at hand can sewing machine and have basic knowledge of sewing. For work you will also need:

Cutting scissors;

Pins;

Strong threads;

Chalk or special pencil;

Various elements for decoration (optional).

First you need to choose the right fabric. The choice in this case will depend on several factors, the main of which will be wear resistance. If the furniture is not often used and serves rather a decorative function, then covers for it can be made of velor, tapestry or flock. In large families with small children or pets, it is better to make furniture covers from very durable, wear-resistant and wrinkle-resistant fabrics. Relax or jacquard is best in this case. Their cost is much higher, but they will last much longer.

Car seat covers must be sewn from specially designed fabrics. It is best to use automotive jacquard, flock or vinyl artificial leather for this. These materials are highly wear resistant. They easily tolerate contamination with petroleum products and frequent washing or cleaning.

Selecting fabric by color

The next step will be choosing the color of the material from which the covers will be made. Furniture should fit harmoniously into the interior, so it is better that its tones match the colors of the walls or be as consistent as possible in style.

If the interior of the room is made in the same colors and lacks zest, then for furniture it is better to choose a bright fabric that will refresh the decor.

Sewing car covers is made from fabric chosen according to the same principle. The color of the material used must fit into the interior without spoiling its interior. Sometimes the bright colors of the seat covers can liven up the atmosphere in the car, so you can opt for fabrics in bold, rich tones.

We are building a pattern

The pattern for sewing furniture covers can be made in two ways. The first one is suitable for experienced craftsmen sewing business, who know how to build patterns according to taken measurements. To do this, you will need to measure the furniture and, based on the data obtained, create a pattern, taking into account allowances for seams and hemming of edges.

For people who are not sewing aces, it is better to use another method. To build the pattern they will need greenhouse film. It must be applied to all parts of the furniture, be it the back, armrest or other, and outlined at the locations of the proposed seams. After this, the parts drawn on the film must be cut out, and the pattern is ready.

Sewing chair covers is the simplest, and it is better for people inexperienced in making such products to start with it. After the first satisfactory result, you can proceed to more complex work: sew a cover for a sofa or easy chair.

Preparing fabric for cutting

To prevent new covers from deforming during use or after washing, the fabric from which they will be sewn must be subjected to special treatment. To do this, you need to wash it, iron it, dry it, and only then start cutting it.

But it is worth considering that such processing is contraindicated for some materials. If the car seat covers are made from vinyl artificial leather, then it is better not to carry out heat treatment. Too high temperatures can damage this material.

How to cut out parts correctly?

When transferring a pattern to fabric when sewing furniture covers, it is necessary to take into account some subtleties. It's better to do more than when sewing clothes. Ideally, they should be at least 7 cm. To eliminate errors when cutting, you need to place a pattern on the fabric, outline it and add allowances around the entire perimeter. If, when constructing the pattern, the size of the allowances was taken into account, then you only need to transfer the pattern to the material.

If sewing furniture covers is made from fabric with a pattern, then the pattern pieces need to be laid out so that after stitching they match. Otherwise, the case will not look very nice, and all your efforts will be in vain. To eliminate such a nuisance, it is better to use material with a simple pattern that does not require strict matching, or a plain color, for sewing covers.

How to sew covers for upholstered furniture?

In order for the cover to look beautiful on the furniture, it must fit well to it. This is difficult to achieve, but still possible. Before sewing, the pattern pieces must be fastened directly on the sofa (armchair, chair), having first placed them in their places. In places where they are stitched, they need to be secured with pins. By sewing furniture covers using this method, you can make products that fit perfectly in size.

After fastening the parts, the cover must be carefully removed from the furniture and the joints must be stitched with bright thread. To be sure, after basting, you can try it on and adjust it if necessary. After this, sew all the seams using a sewing machine.

The finished cover must be ironed, the seams steamed and only then put on the furniture.

Don’t be upset if sewing covers with your own hands is a little unsuccessful. With a little imagination, mistakes can always be hidden decorative elements. Uneven seams can be hidden behind beautiful lace, satin ribbons or fringe. If the errors are too large, and the cover turns out to be too small, you can increase it with various inserts, decorating it beautifully.

Sewing car covers

Car seat covers are sewn using a different method. It is quite inconvenient to fasten them on the seat, so after cutting all the parts are swept along the drawn lines. After this, fitting is done. If the cover fits well to the seat, it can be sewn. Otherwise, it is necessary to correct the mistakes made. After sewing all the seams with a machine, you need to sew a zipper, elastic bands or Velcro into the case. Ready product It is necessary to iron if the material can withstand high temperatures. Products made of leatherette or other materials that are contraindicated high temperatures, no need to iron.

Sewing covers is a very interesting and useful activity. It allows you to spend your time profitably, transform your apartment or car and save money. If the covers turn out to be very beautiful, then sewing them can become an additional or even your main income. A successful product will always catch the eye of guests or passengers, who may want to order beautiful covers for their furniture.

Due to frequent use, upholstery on furniture, especially on sofas, can quickly lose its attractive appearance. It becomes shabby and fades in certain places. A regular sofa cover can help prevent this situation.

Peculiarities

A sofa cover is a universal item. He has whole line features and advantages that only confirm the need for its use:

Cover-cape helps to preserve the original appearance of the upholstery for a long time.
Suitable for sofas of all sizes regardless of their area and shape.
It has a huge variety of different models: with elastic band, cape cover, stretch cover, dimensionless and so on.
Can be made from material of any texture and color.
Covers allow you to change the design of your sofa in a few minutes. With their help, you can radically change the overall perception of the interior of the room.
Unlike sofa upholstery, the covers are much simpler and more convenient not only to use, but also to maintain.
Such covers can be used on sofas of any size and shape., including modular and transformable sofas. This is explained by the fact that even if the cover you need is not on sale, you can easily make it at home yourself.
Another feature and at the same time, the main advantage of sofa covers is their cost-effectiveness. Their use in Everyday life helps you save a lot. After all, such a furniture cover will in any case cost much less than purchasing a new sofa or restoring it.

Those who already use such sofa covers in everyday life say that they significantly save time, effort and money. A wide variety of materials are used to create them.

Materials

Absolutely any materials existing today can be used to make sofa covers. However, experienced seamstresses say that it is necessary to avoid too thick upholstery fabrics that are used directly to create sofas, since they are difficult to use and at home it will be difficult to create a beautiful and practical cover from them. It is also not recommended to use fabric that is too light, such as chiffon or satin. Of course, covers made from these materials look luxurious, but they are not very practical to care for, and they wear out quite quickly.

The best options The fabrics used to create such a cover are the following:

Flock or artificial velvet substitute. It is very soft, pleasant to the touch. The great advantages of this material are its characteristics: it is easy to clean, does not undergo deformation, and does not change the color intensity of the paints even after prolonged exposure to the sun. It is also important that this fabric has good water-repellent functions due to its high density. Also, it is in flock that linen mites are least likely to appear. The material is very light and easy to use, but can sometimes cause an allergic reaction.
Cotton or wool velor. This fabric is not capable of causing allergies, is not a source of static current accumulation, has a long service life and is very easy to clean, and does not deform after washing. The disadvantages of this material are its decent cost, as well as relatively high fragility, for example, cat's claws can quickly render such a case unusable.
Microfiber or artificial suede substitute. It is advisable to give preference to fabric that has been previously impregnated with a special Teflon mixture. Not only will it be soft and pleasant to the touch and wear-resistant, but it will also repel water, grease and dirt from its surface. This fabric feels very soft and pleasant to the touch. It does not fade in the sun or become deformed, and does not cause allergic reactions.
Teflon flock– a universal fabric for a sofa cover if there are animals or small children in the house. It has the same qualities as regular flock, but in addition to them, it also repels any type of dirt from its surface and does not absorb water at all. It is almost impossible to get such a cover dirty.

Jacquard- This is a fabric with increased strength indicators. She doesn't give in various types deformation and does not change its size during operation. Soft and pleasant to the touch, it has an expensive and presentable appearance. Quite easy to use and care.
Leather. It is quite rare to see a leather cover on a sofa. Indeed, such material is not often used, due to its high cost and certain inconveniences during operation. If you still decide to sew just such a cover for furniture, then it is better to use artificial leather.
Flannel stretch. Usually a fabric with a compression effect is used. These covers are very easy to wash and dry. They stretch easily and completely follow all the contours of the furniture. It is the least expensive compared to other materials.
Cotton- This natural material for a sofa cover. It has many colors and textures and does not cause allergies. It’s just that hard-to-reach stains are difficult to remove from it, and during the washing process the fabric may shrink too much.

It is still better to give preference to denser fabrics, since their service life is much longer. In addition to the fabric itself, to create a cover you will also need threads, needles, patterns and, preferably, a sewing machine. Although you can do without it.

Dimensions

In order for the case to look beautiful and last a long time, you need to choose the right size. Sofa covers can be dimensionless, double, triple and corner. In order to decide which size you need, you just need to take simple measurements. The dimensionless cover can be made from any material. His distinctive feature lies in the fact that the lower and side parts of the fabric itself are located on a special elastic band like an accordion, so you can stretch the cover over a sofa of any size and shape. This cape is called “Eurocover”; its distinctive feature is the use of very dense material and heavy-duty elastic bands. In order to find out the sizes of other types of covers, you need to measure the height of the sofa itself and the length of its back. Thus, a double sofa has a backrest with a length of 120 cm to 150 cm, and their height does not exceed 100 cm.

A three-seater sofa usually has a height of up to one meter, but it can be 10 cm more or less than indicated, and the length of the back is in the range from 150 to 210 cm. With covers for a corner sofa, everything is a little different. There are standard covers on sale, designed for sofas up to one meter high and with a back length from 300 cm to 450 cm. If the dimensions of your furniture are different, then before sewing you need to measure the same parameters and create a pattern for the future cover in accordance with them. A wide variety of cases are available for sale. But only a hand-made cover for your favorite sofa can emphasize the individuality of the room and become a real decoration of the interior.

How to create?

In fact, making a cover for your favorite sofa with your own hands is not so difficult. All you need is to stock up on tools, choose fabric, buy it in the required quantity and follow our short instructions. The easiest way is to make a cover for a sofa without armrests, so if your cover is the first one you have sewn with your own hands, it is better to start with it. Stretchable covers, which can be sewn both on sofas with and without armrests, will be no more difficult to manufacture. The most labor-intensive thing to make is a sofa book cover.

But regardless of the type of sofa and the size of the cover created for it, you must first decide on the amount of fabric that will be needed for the job. In order to find out its exact quantity, you need to measure the length and width of your sofa, multiply the resulting numbers by two, and then add them together. The total amount is the number of meters of fabric required.

The pattern is the very first stage. To create it, you need to take measurements from the sofa and put them on thick paper, completely observing all the curves of the furniture. The process is quite lengthy, so you can make it simpler. Take old case, cut it open and trace it along the contour on paper, from which you can then cut out the pattern itself. It is best to make the pattern without a skirt; if necessary, this detail can be made later. Now the resulting pattern is applied to the material from the inside out and outlined with an overlap of 1 cm around the edges.

Necessary tools. They are: paper or cardboard for the pattern, measuring tape, chalk, the fabric itself, threads, needles, wooden slats, scissors and sewing machine. In some cases, you can do without a machine, for example, if you are sewing the simplest covers that take the shape of a sofa with elastic for furniture without armrests. You may also need safety pins and regular pins; it is better to prepare them in advance. To create a pattern you will need a large free space, it is better if it is a table with a large tabletop.

Step-by-step instruction

Here we will look at several options for sewing covers for sofas, depending on their design and size. P sewing a cover for a sofa with an ottoman without armrests or a regular one.

Make a pattern according to the size of your sofa.
Transfer the resulting pattern onto the fabric. It is very important not to forget about the overlap here. Ideally, it should be equal to 1 cm, but if the cover is sewn for the first time, then you can leave more free space.
Now you need to connect all parts of the fabric together with a regular seam. This will not only connect the parts of the pattern into one whole, but will also help make working with the sewing machine easier in the future.
Now all the seams are sewn one by one.

If the cover has an elastic band, it is necessary to cut off the required amount and apply it to the bottom of the cover before it is stitched around the edges. It is worth remembering that the elastic will stretch, so its length should be slightly more than half the length of the lower part of the fabric. It is best to measure the length of the bottom of the sofa with the stretched length of the elastic band, and then the top.
The elastic is applied to the fabric and traced along the width. Using chalk, a line is drawn on the fabric, which determines the position of the elastic inside the future cover.
Stitches are made using a needle and thread, which form the location of the elastic in the fabric, that is, a kind of tunnel for it.
The elastic is inserted into the cover and all seams are basted carefully stitched on a machine.
You can determine the location of the elastic in advance when creating a pattern. and while sewing together the parts of the future cover, perform the last two procedures.

If you decide to choose the option of creating such a cape for a model with an armrest, then the sequence of actions should be as follows:

Calculation required quantity material. The length and width of the furniture are alternately multiplied by two, and then the resulting numbers are added together.
Using thin wooden slats, the fabric is attached to the sofa. It is best to do this at the joints of the backrests and seats, as well as the armrests and backrests.
The fabric is pressed onto the edges of the armrests and on the corners of the furniture itself special clamps . You can use a regular construction stapler.
The slats and clips are decorated with fabric. Decorative elements in this case are selected individually depending on wishes.
The sofa cover is ready.

The advantages of such a cover are the simplicity and speed of its production, but the disadvantage is that it cannot be removed, cleaned and washed regularly. The cover for the sofa book is sewn as follows:

Remove patterns.
Transfer the patterns to the fabric and cut them out.
If necessary, mark the location of the future elastic band. It is preferable that the cover for such a sofa be elastic.
Now the fabric parts are sewn together. The nuance here is that the cover will not consist of one whole canvas, but of several. Therefore, the cover for the back, seat and armrests is sewn separately.
All seams are additionally sewn on a machine.

The cover for a corner sofa is considered the most labor-intensive to manufacture. We have prepared for you the simplest step-by-step instructions for creating it.

Using safety pins you need to attach the fabric to the sofa.
All rectangles, namely the sides, back, seat and the armrests are highlighted with pins.
Using thread, you need to sweep away all the parts, completely repeating the curves of the furniture. You can use regular chalk instead of thread. You need to start with upper parts sofa
Unnecessary parts of the fabric are cut off. It is important not to forget to leave an overlap.
Now all the cut out parts are sewn together in pairs. Please note that this case also consists of two parts: upper and lower. Therefore, parts of the backrest and the seat of the corner sofa are sewn separately.
Then the covers are turned inside out and fitted to the sofa. If necessary, it is necessary to mark on the fabric where it is necessary to narrow or, conversely, widen the seam.
After changes made are being implemented and the cover is completely stitched by machine.

Of course, in each specific case the process of making a sofa cover will be different. But his sewing skills come with practice. In order not to be disappointed in the result obtained, you need to listen to the advice of more experienced seamstresses:

If the cover is being sewn for the first time, then it is better not to use very expensive material.
It is necessary to purchase fabric with a small margin, one or two meters will be enough for this. The excess material can later be spent on decorating a finished cover, masking its minor flaws, or reupholstering chairs and armchairs.
Always check the accuracy of your measurements. The proverb “Measure twice and cut once” is very relevant in this case.
There's no need to rush. It is better to try on the future cover after estimating the details. If any inaccuracies are identified at this stage of sewing, they can be corrected.
Always leave at least 1cm of fabric overlap. When creating the first cover, the fabric overlap can be up to 8 cm long. The excess will then be easy to cut off.
If you are sewing a cover for a sofa in the house Where there are a lot of children, it is better to use waterproof material. This will extend the life of your product.
Sewing such a cape requires time and perseverance.. Therefore, try not to be distracted by extraneous matters.

At first glance, it may seem that sewing such covers is a difficult and tedious task. In fact, quite the opposite. A sofa with removable covers can change its appearance as often as you want. At the same time, with each case you sew, your skill will increase, and the time spent and the amount of work will correspondingly decrease.