The Rubik's cube is already a thing of the past. Today's kids are obsessed with pocket-sized toys that spin around. Children are so captivated by fidget spinners that some schools have already banned bringing them with them. On the other hand, toys help relieve stress and calm children who have a special temperament.
Fidget spinners are now collectible and have something of a status status. No child wants to show up at school without the most basic gaming device. If you're on a budget and want a great toy that really stands out from the crowd, there's a simple solution: you can make a fidget spinner your own with my own hands.
There are a few in various ways make a spinner, for example, cut it out of cardboard or use old recycled lighters. However, if you try this at home, be aware that the fidget spinner may cause damage to your skin. With that said, there is simple methods. The choice is yours.
How to make a spinner using plastic bottle caps
To do this you need: 4 plastic caps, a box of cereal, a knife, super glue, a plastic mug, paint or glitter
Collect four bottle caps. Take four plastic lids from used bottles that are the same size. Glue them together so that all sides meet the middle cap, and then bend the hole in the middle bottle cap with a toothpick.
The weight of the glue inside the caps. Some people prefer to stick pennies on inside caps for added weight, but household items such as magnets will work the same.
Replace bearings with paper. Place the bottle cap over the plastic cup and cut out a circle. Once the circle is cut out, punch a hole the size of a toothpick and place a plastic circle on the inside of the bottle cap to line the empty space. Then take a penny draw 10 circles on the box and cut them out.
Make sure all holes line up with each other; it will be important step to the correct rotation of the spinner.
Glue the circles together. Stick your toothpick in each circle and glue the five cardboard circles together, lining up the small holes. Take two more penny circles and this time avoid punching a hole through them and glue each circle to one side of each five.
Attach all the parts together with glue. Take a toothpick and one stack of cardboard circles and glue the toothpick in the middle. Attach a toothpick to the center of the middle bottle cap and cut off the end. Leave a little toothpick on the opposite end and glue that end in the middle of another stack of cardboard circles to act as a bearing. Your spinner should now spin like the original.
Decorate your creation. Now that your spinner is almost ready, paint or adding some sparkle to your toy will complete the job.
How to make a spinner using skateboard bearings
Materials needed: plain bearings, knife, thick rubber band, super glue.
- Assemble three skateboard bearings. Take the three skateboard bearings you have chosen and align them together horizontally. Take the middle bearing and pull out the middle tread with a knife to expose the inside of the wheel.
- Glue them together. Glue the three bearings together in a straight line with super glue and wait until they dry.
- Cover with rubber band. Wrap a thick rubber band around the outside edge of the three support bearings for support, and decorate the rubber band if you want to add some character to your new toy.
- Can be done Alternative option spinner, which looks more like a traditional spinner. You need to assemble four skateboard bearings and follow all the same steps. The middle bearing will have an open wheel, and the other three should be glued proportionally, around the center.
- Once your feeder is complete, place thumb and your middle finger into the center of the toy and release the stress of life.
How to create a paper spinner
What do you need for this:
- Cardboard.
- Scissors.
- Safety pin.
- Toothpick.
- Glue.
- Stickers.
- Cut the cardboard into four small circles and one propeller shape.
- Poke holes in the center of each of the circles and the propeller using a pin or pointer.
- Apply a spot of glue to the back of one of the circles and insert a toothpick through the hole. Add a second circle to the toothpick and press the pieces of paper to seal the glue and attach the pieces to a toothpick.
- Add the propeller to the toothpick.
- Repeat step 3 with the remaining two circles, leaving about 1/4 inch between the first set of circles and this one (the propeller needs room to spin).
- Remove excess toothpick ends from spinner and decorate with stickers.
The spinner is a new fun toy that adults and children will enjoy. It appeared in America last year and in a short time gained enormous popularity. The principle of operation of the toy is simple: with the middle and thumb of one hand we grab the central bearing. With the other hand we activate the wings of the turntable. With sufficiently good control skills, you can operate the toy with one hand. Use your index finger and thumb to grasp the center bearing. The hand spinner consists of three parts: a housing, a bearing and a plug.
Advantages of a spinner
- Hand motor skills develop, fingers become more sensitive. This tool will be very useful for those who have suffered various hand injuries.
- This is a kind of anti-stress toy that calms the nerves. In addition, thanks to it, you can concentrate, restore efficiency, relieve anxiety and nervousness, and also become less irritable.
- The spinner will be an excellent companion during a long trip; it can be a great way to occupy your free time.
LED spinner on the controller
Some people buy them, while others make them themselves. Here circuit diagram spinner with LEDs controlled by a microcontroller. When rotating, all sorts of pictures and signs are created.
Project Parts List:
- MK ATtiny-45
- 5 smd led (1206)
- 5 smd resistor (47 ohm)
- 1 battery 16 mm (3 V)
- 22mm diameter bearing
- A piece of wood or plastic
As you can see, the scheme is simple, but if anyone doesn’t understand something, study the datasheet from Atmel.
The positive LED leads go to PB0 - PB4 on the MK. To limit current, resistors are added between them. The negative contacts of the LEDs go to minus - GND.
Possible different variants displaying figures, so a browser page is made to create image sequences for the spinner. In the general file, the link to which was above, you will find the drawing, firmware and program.
Spinner with ball bearings
This spinner consists of a housing on bearings and a plug. The center bearing is the most important. The speed and time of rotation of the spinner depends on its quality. The plugs are inserted into the central hole.
One of the most accessible means at hand is paper and cardboard. A hand spinner is made from paper using a knife, four bearings, and glue. First you need to make drawings. Using a utility knife, cut out pieces from paper or cardboard. Holes for bearings are cut out nail scissors or a knife. It is important to ensure that their diameter is slightly smaller than the diameter of the bearing. This is necessary to ensure that the bearings fit tightly into the holes. The number of parts depends on the width of the bearing. Gluing requires a lot of glue. it will give the product greater strength. After finishing the work, we paint the toy in any color.
To increase the moment of inertia, it is necessary to provide weights. The most simple option are coins glued to each other. For 10 mm plywood, you need to glue 8 ten-kopeck coins together. We level the internal surfaces of the workpiece using a drill. We carefully and quickly bring the outer surfaces to the contour using a grinder with a grinding wheel. We remove all remaining irregularities manually with sandpaper.
For those who know how to work with a jigsaw and drill, you can make a spinner out of wood. Wood is an environmentally friendly material. The product turns out beautiful and pleasant to the touch. First we choose durable wood. For beginners, it is better to use plywood. Working with wood requires skills. First prepare a drawing. You can come up with it yourself or simply print it from the Internet. Place the paper blank on the wood or plywood and trace it with a pencil. Cut out and sand the part with sandpaper. The hole can be cut out, but it is better to use a drill to make the hole even. Important point: Use a drill to make a hole halfway on one side, and then turn the part over. This way you have a better chance of getting the perfect hole for the bearing. The thickness of the wood or plywood should be exactly the same as the bearing. If it is a little larger, it needs to be sanded.
Typically, a bearing from skateboard wheels, rollers or scooters is used. They have standard size diameter 22 millimeters, width and inner diameter can be selected at your discretion.
After experimenting with sizes, we came to the conclusion that perfect size for long torsion 25-27 mm in diameter. At the same time, for a spinner it is better not to take bearings smaller than 20 and larger than 30 mm.
Finger spinner will be a savior for those people who bite their nails, pens, or the like during stress. The fidget spinner is designed to relieve stress, warm up your fingers, as well as concentrate your attention and develop hand motor skills. Such a device will become an indispensable thing for children and adults.
The surface of the materials can be lumpy or smooth, and you can find a variety of color options: white, black, red and many others. The size of the toy is small, which allows you to carry it with you. Unusual and stylish design can make a great accessory out of it.
How to make a spinner with your own hands
Why do you need a spinner from a store if you can make it yourself? The whole process of work will take a little time, and its design is simple. In order to start tinkering, you will need:
- Textolite;
- furniture ties;
- bearings;
- drill and drill bits for it;
- ruler, compass.
First you need to take the PCB and cut out the base for the spinner from it. First, using a compass, a drawing of the toy is drawn, and only then it is cut out. Before you start drawing the base, you need to find out the size of the bearing, for example, it is 22 mm, so the compass needs to be inserted into the PCB at 11 mm and draw a circle. After this, insert a compass at 18 mm and draw another circle. An individual calculation is required for each case. This is easy to do, all the variety of options are presented on the Internet, there are also stencils for the spinner.
Then we start working with bearings. Each of them needs to be wiped with resin, after which they can be connected to the block. Only after this can you drill holes for the sleeves. To do this, you need to mark six sectors of the spinner. Each intersection point of sectors and circles is the center of the sleeves. You need to drill holes in each intersection, exactly six pieces. Then you need to drill out the center of the spinner.
Each sleeve must be sanded before being inserted into the hole. This is very simple to do; to do this, you need to insert it into the drill chuck and rub it against the sandpaper until all the paint is removed from them. Each of the sleeves must be lubricated with the same resin and pressed in.
After all the steps are done, the toy needs time to dry. This will require a minimum of six hours, after which you can enjoy playing with the hand spinner.
Video - the coolest spinners
The entertainment industry is constantly expanding. New and new toys appear regularly that develop fine motor skills bodies.
A new hit that displaced the once popular fingerboard was the fidget spinner. At its core, it is one bearing that is surrounded by a certain number of plastic sheets.
These toys are completely different. Everyone will be able to choose their own.
How does this device work? What is it for? And in general, what can you do with it? Let's deal with everything in order.
Description of the spinner
Spinner can be seen in almost every tenth resident big city. The thing is that this is one of the the best means to release the accumulated internal energy. In addition, it is often used to calm down after a hard day at work.This toy consists of 3 parts:
- Bearing– the main trap of the spinner. At its core, it is an ordinary metal ring, inside of which there are balls of a smaller diameter. It is thanks to this spare part that this mechanism rotates. The quality of this part significantly affects the rotation speed.
- Frame- This is the part that rotates around the bearing. It happens absolutely different shapes. Its appearance significantly affects the sensations from the promotion of the device;
- Lid- an element that is screwed into the bearing for ease of use. Without it, it is difficult to rotate the spinner.
The most important parameter for fans of this device is the rotation speed.
What can I do to make the spinner spin longer?
The answer is simple: you need to buy a high-quality bearing and replace it. It is best to immediately buy an expensive spinner, which will be created for high-speed spinning.Types of spinners
There are many different spinners. They differ in the design of the case. Let's look at the most popular of them:- Single- the most popular option of all presented. It is a small plate with a bearing inside. Common because of its compactness and convenience. They are the easiest to unwind. A good option for newcomers to the spin world.
- Three-spinner- in essence, it is a miniature “shuriken” with a metal weight for rotation inside. Also, its design is reminiscent of a three-leaf clover. The beauty of this mechanism is that bearings are installed on each petal. This is done to maintain balance while spinning and increase speed. Made from the most different materials, ranging from metal to wood and leather.
- Quad spinner– this is already a “four-leaf clover” with a bearing. From a design point of view, they are the brightest and most colorful. For some reason, decorators try to make them “the most elegant”.
- Exclusive– these include all spinners that have an unusual and individual design. They are not always convenient, but they are most interesting for hardcore people (real fans of these things).
- Wheel- consists of a bearing and a wheel that rotates around it. Interesting device, however, when used, there is no “wow” effect. That is why only the most sophisticated people use it.
How to choose a spinner?
First of all, when choosing a spinner, you should start from personal preferences. The most important element Something worth considering is the design. You must like him personally. Choose the one that fits best in your hand.You can spin the spinner right when purchasing it to evaluate the second and third significant factors - speed and vibration. As stated earlier, many people want the spinner to be faster than lightning. However, not everyone likes this. The fact is, the higher the speed, the stronger the recoil, that is, the vibration. Many people like the pleasant feeling in their hands. If this is the case, then take a metal spinner, you won’t go wrong.
If vibration and high speed are not your thing, then buy a spinner with a plastic body.
Spinner tricks
Simple helicopter
This trick is basic. In fact, once you master it, you won’t have any problems with others. It consists of getting the toys and throwing them from one hand to the other. An important point: during the “flight” it should not “stall”.This technique is done in a simple way:
- Spin the spinner in one hand for about 5-10 seconds.
- Toss it to your other hand and grab it. The rotation should not stop when grabbed.
It turns out that you need to grab the bearing cleanly. This is not as simple as it might seem at first glance. However, practice will put everything in its place.
Runway
This trick is a more complicated variation of the first one. Below is how to make a runway:- We launch the spinner from one hand to the other.
- We catch it with the back of our hand. You need to get exactly into its center so that the rotation does not stop.
- After this, we raise our palm up and catch the toy in the air with our thumb and middle fingers. Ideally, the rotation should not stop.
Throw from under your feet
This trick is no longer easy. It will take a long time to get used to it. It is done like this:- Launch the spinner in one of your hands index finger. Lower your hand gradually down, trying not to upset the balance of rotation.
- Throw the toy up, while raising your leg. She must fly under it.
- With your other hand you need to grab the bearing so that it does not stop rotating.
- You can do this method with both legs until the engine stalls.
Well, are you ready to repeat the trick?
Choose any in our store and train!
Spinner tricks for kids
According to a study conducted in 2015 by American scientists, a spinner is an excellent toy for children suffering from attention deficit disorder. It allows you to improve concentration and develop fine motor skills of your fingers.It is not surprising that many people buy these toys for their children. Naturally, they also want to do all sorts of cool tricks with it.
Advice: start with the “helicopter” technique. As said earlier, this is the basis of all further tricks. Also, no one forbids performing the previously described elements.
Taking off into the air
Every young boy will love this interesting technique. To learn how to do it, you will have to practice, but the effort will be worth the effort.1. Spin the spinner in one hand with your middle finger.
2. Launch it into the air and catch it with your second hand.
3. Now we throw the toy up with a sharp movement. You need to catch it with the same hand by the bearing so that the rotation does not stop.
4. You can toss infinite number times until you get bored.
The catch with this trick is that you need to learn to grab the mechanism by the middle so that it does not stop. It is also desirable that the rotation speed of your spinner be high so that you can throw it up at least a couple of times.
Dorsal flight
One of the most effective techniques is throwing behind your back. It is not easy to implement. After all, the spinner throw will have to be done blindly.Advice: throw the toy as far as possible so that it can enter your field of vision after a slight turn of your head. As soon as you see it, grab the piston with a sharp movement. If the “helicopter” is mastered to perfection, this will not be difficult.
Yula
This is a fairly simple trick. It is enough to simply launch the spinner not on your hand, but on a flat surface (on a table or floor). After this, you can watch the bewitching dance of an unusual toy for all ages.These techniques can keep you and your children busy for hours. So feel free to choose the perfect spinner and go ahead and conquer the world of “spin”.
The spinner is a fashion toy invented in the USA. It appeared in Russia in 2016 and has already gained extraordinary popularity. What is it? She is called a spinner, a spinner, a fidget.
It develops fine motor skills of the fingers, relieves anxiety and has an anti-stress effect. Fidget spinner is not only a toy designed to entertain children and adults. This is a great way to spend time waiting, traveling in public transport, and queuing. This turntable also allows you to get rid of bad habits, such as tapping your fingers on the table surface, repeating hand movements, and even the habit of smoking. Will allow you to get rid of bad habit twist something in your hands. The working principle of the fidget spinner is the use of a bearing in the middle of the product with petals.
The fitget has two, three, four, five, and some models even six petals. The most common are toys.
The spinner is made of wood, brass, bronze, plastic, and can be combined.
Two types of bearings are used: metal, like, or with ceramic balls. Characterized by rotation time. The spinner rotates from one minute to several tens of minutes. The longer the rotation occurs, the better the quality of the toy.
The cost of the product is affected by use quality materials in the manufacture of a body with petals. The easiest way to buy a spinner is in.
Making wood in a home workshop
However, a person familiar with tools can make such a toy for himself. For this you will need:- A small piece of wood, preferably hardwood;
- Bearing (suitable for a broken skateboard);
- Sleeves or suitable pieces round metal;
- Epoxy adhesive.
Video with instructions for making a spinner from wood
First of all, we mark out a piece of wood. A square piece is required.
We drill a hole in the center and expand it to fit the external dimensions of the bearing. The thickness of the workpiece must be equal to the thickness of the bearing. The next step is to insert the bearing and glue it with glue.
From two opposite sides We drill two holes equal to the smaller diameter of the sleeves. Then we take the polished sleeves, glue them in pairs and mount them with glue in the prepared holes of the board. Let the glue dry.
We clean, sand and paint in the color you like. A simple spinner with two petals is made at home. In the same way, you can make a homemade gadget from plexiglass or PCB.
It is more difficult to make a product with three petals. To do this you will need a drawing, a jigsaw and a protractor. The diagram below clearly illustrates how to make such a toy.
Paper spinner
- Much easier to make hand spinner from paper.
- We print the drawing on a regular printer.
- Transfer the drawing to thick paper or cardboard.
- We cut out 15-20 samples according to the template. Using scissors, we make a hole for the bearing, slightly smaller than the outer diameter.
- Glue the cut out samples with PVA glue.
- Place under the press.
- After the glue has dried, insert the bearing.
- We clean it with scissors and, if necessary, sandpaper.
- We paint in desired color. The toy is ready.
Video with instructions for making a paper spinner without a bearing at home
As you can see, the cost of the product consists mainly of own work, because Parts from out-of-circulation mechanisms were used for production.Before assembling the gadget, inspect the bearing. To do this, remove the anthers and wash them. This completes the work on making the turntable.
Luminous
- The most interesting toys are obtained if you make them yourself from absolutely incredible materials. Make a glowing fitjet - all you need to do is buy a phosphor online in China.
- Dilute 3 grams of powder in 7 ml of glycerin to obtain a luminous liquid.
- Then you can use the described method for making the central part from wood. Just use glass flasks from fluorescent lamp starters instead of sleeves.
- We pump liquid into the flasks using a syringe and glue them into the prepared holes.
Made from chocolate
Any material you can imagine is suitable for making a spinner. It can be made from wax, paraffin candles, ice and even made edible.A very original gadget is made from chocolate.
I played and got tired of it and ate it.
To make such a toy you will need:
- Make a mold for filling;
- Bearing;
- Candies such as confetti or jelly beans;
- Cardboard, for form and glue;
- Wax paper;
- Scissors with pencil;
- A piece of foil from a chocolate bar and the chocolate itself;
- Glue.
Video showing how to make an edible chocolate spinner
- A drawing is taken from which the twist template is cut out. A strip slightly larger than the thickness of the bearing is cut out of paper and glued along the perimeter of the template.
- Then we completely wrap the prepared bearing in foil and place it in the center of our mold, having previously placed wax paper on the bottom of the mold. We place candies along the edges of the petals (you can do without candies, this is for beauty). All that remains is to dissolve the chocolate in a water bath.
- As soon as the chocolate becomes liquid, it is poured into the mold using a pastry syringe. It is necessary to pour very carefully so as not to move the installed parts.
- After filling everything with chocolate, place the toy in the refrigerator. After some time, the chocolate will harden and can be removed from the refrigerator.
- All that remains is to remove the product from the mold, free the bearing from the foil, clean the edges - and you can use it. When you get tired of it, you just have to eat it.
- The entire manufacturing process can be filmed and shown to friends or posted on the Internet on your page.
- In a similar way, a fitget can be made at home from any hardening material: stearin, wax, gelatin, and from colored wax candles you will get a multi-colored spinner body.
- The gadget should rotate smoothly and without noticeable beats.
- The quality of workmanship should not cause any complaints.
- The material from which the toy is made must be of high quality.
- The rotation is quite long: the longer the better.
So we see that no one can give an unambiguous recommendation. Focus on your own feelings. To ensure that the pinwheel serves for a long time and is always attractive, follow the recommendations:
Protect the toy from mechanical damage, falling from a height onto a hard surface;
If the product is made of plastic, it is not recommended to disassemble it, especially the button - the plastic parts can be damaged; they are glued or pressed in very tightly;
Periodically wash and lubricate the middle bearing using a syringe with a needle. Wash with gasoline, preferably for lighters, it has almost no odor. It is recommended to lubricate with watch oil in a small amount. Mineral oils should not be used for lubrication.
spinner- a newfangled simulator for developing fingers, relieving stress with a bearing in the center. To put it into working condition, you need to take it by the inner part and unscrew the outer part. The spinner will spin around its axis for some time.
The spinner is fun for everyone: for respectable men in expensive suits, and for restless children, the structure does not contain small parts, and the toy itself has no sharp corners.
The device has a beautiful aesthetic appearance and comes in a variety of colors. Its compactness allows you to take it with you everywhere.
The spinner is purchased for personal use, as unusual gift for all age categories of people of different status: the item will bring joy and pleasure to everyone.
According to experts, the subject helps people with autism and attention deficit disorder concentrate. It helps to calm down hyperactive children who don’t know what to do with themselves. Some people find comfort in the sound of the device vibrating.
In the article you will learn details about the little thing, the history of its creation, and operating instructions. Also learn how to make a spinner with your own hands.
Kinds
Spinners come in a variety of shapes, sizes, and prices range from a dollar to hundreds of dollars. The toy is made from different materials: metal, wood, plastic. When using a combined material.
Spinners come with three or two petals, smooth and rough.
Plastic ones are larger in size and lighter in weight compared to metal ones.
The ceramic bearing promotes long-term rotation of the object.
History of origin
The fidget spinner was invented by American chemical engineer Katherine Hettinger. According to her, the idea of creating anti-stress came to her in Israel. Watching the picture of children throwing stones at the police, she wanted to make a toy that would occupy the thoughts and hands of the boys, freeing their minds from pranks.
According to other sources, the scientist invented an activity for her daughter, with whom she could not spend much time due to illness.
In the 90s, a woman offered her invention to manufacturers, but no one took the patent. Currently, the device is not similar to the previously invented one.
In 2014, businessman Scott McCoskery created a similar product to relieve stress. It represented an iron rotating device. All his friends liked the invention, and in 2016 McCoskery filed a patent for himself.
The product appeared on the Russian market in 2016.
What is a spinner for?
The purpose of the spinner is to train hands and develop children's motor skills. The device relieves stress, helps cope with anxiety, concentrate, and calms.
Often the simulator is used to train fingers and hands after injuries.
A worthy advantage of the finger spinner is that it helps quit smoking. Monotonous spinning movements calm you down and distract you from thoughts about bad habits.
How the device works
The gadget does not require batteries or accumulators to operate. There is a bearing in the central part. All you have to do is snap your fingers and the unit will work. You need to hold the middle with your thumb and middle finger. You need to operate the machine with your index finger.
How to spin a spinner video
The bearings differ in quality. The higher the rating, the longer the spin takes. For a rotating element, a central bearing is sufficient, the rest will serve decorative element and weights to improve balance.
How long does it take to spin?
How long does the spinner last? Rotation time - important quality and one of the main indicators of traits good device. Connoisseurs of quality toys use only expensive bearings, calculated balance and the right materials for long-term rotation of the spinner.
This may not seem like a big deal, but believe me, once you spin your first spinner, you will be surprised at how quickly you will want the spinner to spin faster and longer.
The price of a spinner starts from a dollar. Inexpensive trinkets spin for a couple of minutes. The duration of rotation of serious units (using steel, copper, brass) reaches tens of minutes.
The greater the weight of the product, the faster the bearing works and the device rotates, the louder the sound and vibration. Ceramic and composite bearings vibrate less.
How long does it last
There is no clear answer to the question of how long a spinner lasts. Criteria long service depend on the materials used, careful operation, and absence of mechanical damage. Metal bearings will extend the life of the device for many years.
Those who are skeptical about these toys simply have not tried to twirl them. Once you find “your” device, you won’t want to part with it, the activity is addictive.
DIY spinner at home
Making a device with your own hands is not so difficult, follow our tips, watch the video, add skill and soon you will be rotating the product.
Made of paper without bearing
A do-it-yourself spinner without a bearing can be made from paper and scrap materials.
Master class of the Plastilin channel.
How to make a spinner out of paper? First, draw a drawing: take a round object with a suitable diameter (in the example, a bottle cap), draw a sketch as in the photo.
Then you need to smooth the corners between the circles.
Cut out the shape along the borders.
Attach it to the cardboard, trace and cut out a second identical part.
You need to cut 4 circles with a smaller diameter.
The coins will serve as a weighting agent. Paste into three parts according to severity,
Glue the other half on top using glue.
Make a hole in the center with nail scissors.
This is what the blanks should look like.
Decorate your toy, paint it in your favorite colors.
Cut a piece from the juice straw and insert it into one of the circles.
Secure with glue and let dry.
Let's assemble our unit.
A circle without a hole is glued on top.
Your DIY paper spinner is ready.
How to make a spinner from scrap materials video
DIY spinner made of wood
If you have golden hands and they know how to operate a jigsaw or drill, you can easily make a product out of wood. It will turn out smooth, good quality, and will be pleasant to hold in your hands. Below is a master class from the ZarkReed channel.
Spinner bearing
Which bearing to get for a spinner? Answer: any. Remove from a broken skateboard or scooter. If a fan or computer cooler breaks down, get it out of there. If there is nothing to take apart, order online or purchase in a store.
Stages
Beginners should start with thin wood material, for example, DPS. Manufacturing procedure:
- Draw a drawing.
- Cut out a sketch from paper and attach it to wooden surface, circle.
- Cut out and sand the parts with sandpaper.
- Enlighten the hole in the middle - it will turn out neater.
- An important point: the thickness and diameter of the hole in the tree and the bearing must match.
- The coins are glued with glue.
- The base is painted over with acrylic paints.
- The central part and coins are threaded and glued.
The spinner toy is ready.
DIY wooden spinner video
DIY glowing spinner
Spinner can also be made glowing using LED strip and battery. Stock up on the necessary ingredients, watch the video and make your own beauty.
If you make this little thing as a gift and give it to a loved one, he will appreciate it! This is a very popular and fashionable destination, you will need to look for those who are indifferent.
Text prepared by: Veronica