How to make a sun lounger with your own hands. Design features, variety of materials and shapes. A step-by-step description of the process of making a sun lounger with your own hands. The best ideas for making your own sun lounger for the dacha How to make a sun lounger at the dacha

(18 ratings, average: 4,22 out of 5)

What summer resident doesn’t dream of relaxing after a hard week of work on his property, taking a comfortable position on a comfortable folding bed? However, a chaise longue is not a cheap pleasure if it is really high quality and good. What to do for those who good sun lounger Can't afford it, but you still want to relax? Don't be content with little: put the uncomfortable bench or chair aside.

This article will cover instructions and step-by-step explanations, and even an amateur carpenter will be able to make a lounger with his own hands, which can even be taken on fishing trips. The chaise longue will harmoniously fit into your country house exterior and will become an integral element of your relaxation.

What is a chaise longue

A chaise longue is similar to a wooden chair, but is more durable and less overall dimensions. It is convenient because a person can take a position that is suitable for the spine and spinal muscles. One more no less pleasant fact is that the back is garden chair regulated. The garden lounger is quite mobile: in summer it can be located in the garden on the site, and in winter it can be located somewhere in the house.

In order to make folding wooden chairs, required:

Some kind of wood, since this material is the most suitable for a garden lounger, and besides, it is quite environmentally friendly;
Rattan;
Plastic;
Two-centimeter slab of laminated wood;
Wooden boards and beams;
Kit necessary tools: jigsaw, drill, screwdriver.
Drill;
Rollers (diameter 10 centimeters);
Corners (fastenings);
Sanding sheets;
Varnish, paint (at personal discretion);

Chaise lounge dimensions

The traditional size of a chaise lounge is 60 x 190 cm, but you can choose the one that will suit your parameters. You should start with a schematic representation of the future chair, drawings must include all the nuances. When a decision has been made on the appropriate size, you can begin to prepare the parts.

Construction stages

You need to prepare the bars for the legs - 5-10 cm. Next you need to attach the legs, stepping back from the edge of the bars 5-7 cm, and rollers to them.

Parts of the grille for the chair must be made using a jigsaw. For them optimal size will be 8 x 60 cm. Spacers will help make a suitable distance from 1–2 centimeters so that the planks can be screwed to the frame. After all this work has been done, the chair needs to be sanded and varnished or painted.

If desired, you can also make a folding country chair. In this case, the wooden lattice must be divided into 2 parts, which then you need to connect using door hinges. Also, do not forget about the mounting strip, which must be installed so that it supports the stand screwed with screws.

Lounger with fabric

The easiest way to make a chaise longue with your own hands is a chair made of dense material on a frame. This optimal choice For summer cottage , since it is quite multifunctional: in a matter of seconds you can make from your country chair chair.

Necessary materials:

For foldable country chaise lounge fabric of sufficient density is suitable, good quality and not exposed sun rays and moisture. You need to choose denim, canvas or tarpaulin.

The work must begin by preparing slats of a suitable size and grinding them, and after that you can begin assembling all the elements.

Assembly instructions

It is necessary to drill holes for bolts of the required size on long beams and remove all irregularities by grinding. Then in a place located in close proximity to the head lying, it is necessary to make the same holes so that you can change the bending angle.

At the ends of the long beams, two holes must be made through which the seat will be made. Diameter round beams should be the same as the diameter of the long ones. For better connection coat the ends with PVA glue.

Connect all the resulting elements with bolts through the holes made in the headboard.

After the above steps, you can begin the finishing touch - stretching the fabric. Stretch the fabric over the frame products, secure the edges to the crossbars with thick thread (if you decide to sew the fabric before attaching it to the frame, you can use a sewing machine).

Kentucky chair

This chair, perhaps, can be called even more interesting than the previous ones, because it will really decorate your teacher. Assembly of the Kentucky chair is carried out only using bars.

In order to make a chair, you will need the following materials:

Assembly instructions

You need to start with processing the wood in order to prevent its destruction, fading, and protect it from moisture, sunlight, and wind. At this stage you you will need a special mixture for deep impregnation of wood for the purpose of coloring (stain). It should be specifically for working with exterior objects. You can also use parquet oil suitable for wooden items. After completing this stage, you need to sand all the bars.

The holes need to be made with a diameter of six millimeters.

How nice after hard times working day retire to the garden or sit on the lawn by the pond to relax, unwind and enjoy the sounds of nature. And what subject garden furniture most people associate with comfortable stay? Yes, a lawn chair! A comfortable portable extended chair, in addition to its direct functional value, will act as an effective element of the exterior, emphasizing the style of the summer cottage. There is nothing difficult about making a garden sun lounger with your own hands. We have selected for you several options for easy-to-make sun loungers. It won’t be difficult to choose among them suitable model, which anyone can build.

This chaise lounge can be safely used instead of a bed: a flat surface, an adjustable backrest. What else do you need for an afternoon relaxation?! The only drawback of this design is that it is very problematic to move it around the site yourself.

Sun loungers of this design are very popular both among vacationers on the sea coast and among owners of suburban areas

But there is a way out! We suggest considering the option of a chaise lounge equipped with rollers. To make a sun lounger you need to prepare:

18 mm thick slabs of laminated spruce wood;
Wooden beams 45x45 mm (for the frame);
Boards 25 mm thick for cladding the sides;
Jigsaw and screwdriver;
Drills with a diameter of 40 mm for wood work;
4 mounting brackets for beds;
Countersunk head screws;
4 rollers 100 mm high;
Sanding sheet, grit 120-240;
Varnish or paint for woodwork.

Plates of the required size can be purchased at a carpentry workshop or at the construction market. When choosing slabs, it is better to give preference to products made from coniferous species, since they are more resistant to precipitation.

The size of the sun lounger depends on the wishes of its owner. In most cases, the design is made with dimensions of 60x190 cm. Having decided on the dimensions of the sun lounger, we make two long and two short sides from wooden blocks. We assemble the structure frame from them, securing them together using fastening angles. Outside We cover the frame with boards.

On long slats at a distance of 5-8 cm from the corner, we attach the legs of the chaise lounge, the material for the manufacture of which was bars 5-10 cm long

We fix the legs to the boards using screws 60 mm long.

We mount the wheels: we install rollers in the center of the short legs of the chaise lounge, fixing them with screws 30 mm long, equipped with a semicircular head with a diameter of 4 mm

For the manufacture of wooden lattice using a jigsaw, cut boards measuring 60x8 cm from the slabs.

We attach the slats to the bed using self-tapping screws, leaving a gap of 1-2 cm. To maintain the gap, it is most convenient to use special spacers

When planning to make a chaise lounge with an adjustable backrest, the lattice should be divided into two parts: the lounger and the headboard. We place both parts on connecting boards and fasten them together using a door hinge.

To arrange the fastening strip between the long beams of the chaise lounge frame, we fix the transverse rail. We fix the support stand on the mounting strip, fixing it on both sides with screws

The finished chaise lounge can only be processed by walking grinder, and open with varnish or paint.

We invite you to watch a video that shows how this chaise lounge model is assembled:

Option #2 – fabric chaise lounge on a frame

Another equally popular chaise lounge model that can be folded into an almost flat shape.

It is convenient to move a light chair around the site, choosing open sunny meadows for relaxation, or, on the contrary, shaded corners in the garden hidden from prying eyes

To make a folding chaise longue you need to prepare:

Reiki rectangular section 25x60 mm thick (2 parts 120 cm long, two 110 cm long and two 62 cm long);
Round slats with a diameter of 2 cm (one piece is 65 cm long, two are 60 cm long, two are 50 cm long);
A piece of durable fabric measuring 200x50 cm;
Nuts and furniture bolts D8 mm;
Fine-grained sandpaper and round needle file;
PVA glue.

It is better to make slats from hardwood species, which include birch, beech or oak. To make a sun lounger, it is better to use fabrics that are highly durable and resistant to abrasion. For example: canvas, tarpaulin, denim, mattress teak, camouflage.

Cut the slats to the required length. Using sandpaper, carefully sand the surface.

According to the diagram, where A and B indicate the main frames, B represents the stop-regulator, we assemble the main structural elements

In the long slats of the main frames, at a distance of 40 and 70 cm from the corners of the structure, we drill holes with a diameter of 8 mm, and then grind them using a round needle file.

So that you can change the position of the backrest in the chaise lounge, we make 3-4 cutouts in frame B at a distance of 7-10 cm. To arrange the seat, we drill holes with a diameter of 2 cm, stepping back from the two ends of the slats. We install crossbars into the holes - round slats, the ends of which are pre-lubricated with PVA glue.

Let's start assembling the sun lounger: we connect parts A and B using screws inserted through the upper holes. Using the same principle, we connect parts A and B, only through the lower holes

The frame is assembled. All that remains is to cut out and sew the seat. The length of the cut is determined by the possibility of folding. A cut that is too short will not allow the chaise longue to fold, and a cut that is too long will sag when folded down. To determine the optimal length, you need to fold the lounge chair and measure the fabric: it should be slightly stretched, but without force.

We nail a piece of fabric with processed edges to the round slats located on parts A and B. To do this, we wrap the edge of the cut around the crossbars, and then fix them with small nails with thick heads. An option is possible in which “loops” are made at the edges of the cut and put on the crossbars.

Option #3 – Kentucky folding chair

The original chair is assembled entirely from blocks. If necessary, the chair can always be folded and stored.

The advantage of such a garden chair is that when disassembled it does not take up much space, and the design is designed in such a way that it allows you to completely relax your muscles.

To make a chair we will need:

Wooden blocks measuring 45x30 mm;
Galvanized wire D 4 mm;
16 pieces of galvanized staples for fixing the wire;
Fine-grained sandpaper;
Hammer and wire cutters.

For making a chair, bars measuring 50x33 mm are also quite suitable, which can be obtained by sawing a 50x100 mm board into three equal parts. The total length of the bars should be 13 meters.

Instead of galvanized wire and staples, you can use galvanized studs, the edges of which are secured with eight nuts and washers.

To determine the required quantity and length of wooden blocks, it is convenient to use a summary table. According to the drawing, we make through holes

The diameter of the holes should be 1.5-2 mm greater than the thickness of the wire used. Having prepared required amount bars, you should carefully process all the edges, sanding the surface with fine-grained sandpaper.

Let's start assembling the structure.

For clarity, we use the assembly diagram of the seat with dividers, as well as the back of the chair. The dotted lines indicate the locations of through holes with wire threaded through them.

On a flat surface, according to the diagram, we lay out the bars for arranging the seat. Pass wire through through holes

Using the same principle, we assemble seats with dividers, connecting wooden blocks pieces of galvanized wire

The main structural elements have been assembled. We take the ends of the wire, holding the sides of the structure, and carefully lift the chair.

All that remains is to cut off the excess wire with wire cutters, and then bend and secure the ends with galvanized staples

Chaise lounge for the garden: 8 DIY models

The garden chair is ready. If desired, it can be coated with a semi-matte woodworking varnish. This will significantly extend the service life of such a popular element of garden furniture.

When arranging a place to relax near a private house, it is impossible to do without a sunbed. This is where the ability to make a comfortable lounge chair with your own hands will come in handy. It is a folding lounge chair on which you can sit in a reclining position.

Sun loungers come in metal, plastic and wood. Often these materials are combined with strong textile inserts, or complemented with light pads in the form of pillows and mattresses.

When you decide to make a chaise longue for your dacha with your own hands, choose wood as the material of manufacture. It's easy to use. A completely wooden lounger will be reliable, strong, and will last you for a long time. Detailed description how you can make a sunbed with your own hands, diagrams, design drawings and photos will help you avoid problems at work.

Lounge chair for relaxing in the garden or by the pool

On such a chaise longue for a summer residence, it is convenient to sit in the shade of plants while reading a book or take a place in a sunny meadow to get a beautiful summer tan. Despite the fact that this is a very simple design, the lounger can be installed in three positions: completely horizontal or with two options for raising the backrest. Moreover, for lifting one of the most simple designs. But we know what simpler mechanism, the less susceptible it is to breakdowns.

Even an inexperienced craftsman can make such a chaise lounge with his own hands. It will have convenient parameters even for an adult tall man: width – 60 cm, length – 215 cm.

Materials and tools

The material from which we will make the lounge chair will be pine beams and boards. Their dimensions, along with a list of tools and fasteners, are presented in the list:

3 bars 4000x100x50 mm;
4 boards 4000x80x25 mm;
2 studs for attaching the back to the frame;
drill with drills;
self-tapping screws;
sandpaper;
wood putty;
paint (color of your choice);
wood glue to strengthen fixed joints;
roulette;
square;
marker;
saw or power saw.

Description of work

Before starting work, carefully examine similar drawings to understand the logic of subsequent actions.

First of all, we assemble the frame from the timber. We take 2 parts of 2150 mm each and the same number of 500 mm each. We make connections using a drill using self-tapping screws. To increase reliability, pre-coat the joints with glue.
Let's start working with the stationary part of the surface. We cut a board with dimensions 4000x80x25 mm with a saw into 60 cm pieces. In total, 13 such parts need to be made.
Leaving centimeter gaps between the boards (60 cm long), we fasten them to the frame with self-tapping screws. We control the angle of connection of the planks at 90 degrees.
Let's start installing the legs of the chaise lounge. For greater stability, the legs in the seat area should be made double. For them, we take 4 bars 35 cm long. We glue them in pairs, then fasten them to the base with glue and self-tapping screws. Any excess adhesive should be wiped off immediately. This will help in the future to avoid problems with processing these areas of wood.
On the side of the headboard we also attach single bars-legs 35 cm long. Then we attach second bars to them, which are 20 cm shorter than the first ones. We fasten them so that the lower edge of the parts coincides (as shown in the figure).

Let's start creating the back of the chaise lounge. The frame of this part will be assembled from pine beams measuring 100x50 mm. Prepare 2 parts of 880 mm and 3 parts of 390 for the back frame.

The dimensions of the backrest base are chosen so that it can fit inside the main part of the chaise longue (with small gaps for free movement).

Back covering. If you want to give the product a more attractive look, attach the trim strips in the direction of the length of the frame. In this case, round the top edge of each board on both sides. Maintain a distance of 10 mm between the slats.
To secure the backrest to the frame so that it can move freely, you need to prepare the holes. Measure 70-80 mm from the edge of the last seat board. At the indicated distance, use a drill to make holes that pass through the frame of the backrest and chaise lounge. Place a pin in them on each side.
The mechanism for raising and fixing the moving part is based on placing bars in special recesses that will not allow the backrest to fall down. The first selections should be made on both sides of the main frame of the sun lounger, retreating 7-8 cm from the hairpin. The dimensions of the recess should be 10 cm wide and 5 cm deep. We make the second recesses at a distance of 20 cm from the first, 5 cm deep and 5 cm wide.

If you place the first support bar, 60 cm long, horizontally in the first recess, the back of the chaise lounge will lock into the “chair” position. The person sitting on the chair will be able to sit comfortably. To change the level of raising the backrest, you should move the first block onto the shortened legs, and insert the second support block (60 cm) vertically into the second recess. You can fully unfold the chaise longue by removing the second bar and lowering the backrest. In this case, the small frame will stand on the first block placed on the shortened components of the legs.

Finally, start finishing the chaise lounge. Use putty to smooth out any uneven surfaces and hide the screws. After drying, sand the corners and surfaces with sandpaper so that there are no sharp parts, burrs or roughness. Cover wooden product stain, this will protect the material from harmful influences. Paint the lounge chair the color of your choice.

The garden chaise lounge for the dacha is ready. You can equip it with a picturesque corner of your garden plot and enjoy a pleasant holiday.

Compact sun lounger: comfort wherever you want

A folding chaise longue, of course, cannot be called a sun lounger; it is more like an armchair. But the product has a number of other advantages. The design is very simple, so making it yourself will not be difficult.

The chaise longue is light in weight and compact, so you can easily move it to a new place. And if you show diligence in your work and care when choosing materials, the product will serve you for a long time. personal plot dachas for more than one year.

What do you need to make a folding lounge chair?

Before starting work, prepare:

For the back frame: 2 parts – 1219x38x19 mm, 1 – 610x38x19, 1 – 648x38x19, 1 – 610x64x19.
For the seat frame: 2 parts – 1118x38x19 mm, 4 – 603x38x19, one – 565x38x19 mm, one – 565x64x19 mm.
To support the back: 2 parts – 381x38x19 mm, wooden dowel with a diameter of 12 mm and a length of 648.
2 pieces of thick fabric, 1372x578 mm each.
2 wooden dowels with a diameter of 12 mm, length - 559.
4 bolts with nuts 50x6 mm.
12 washers.
Screws 50x4 mm.
Glue.

Work sequence

The joints must be additionally glued. After pressing the parts, immediately remove excess glue.

Consider in detail the drawings and diagrams with the dimensions of the chaise lounge. They will help you understand the principle of its folding.
Drill pilot holes, then countersink them for screws.
Assemble the frame for the back of the chaise lounge. Attach the bottom bar 50 mm from the bottom edge. Leave a distance of 10 mm between the 610x64x19 mm strip and the top piece to secure the fabric.

Collect top part The seat frame is similar to the backrest. Attach the first bottom strip, 203 mm away from the bottom edge of the side strip. We fasten the next 3 boards with a gap of 13 mm from the previous one.
We connect the frames of the seat and backrest by tightening them with bolts and installing washers under the bolt heads. We also place washers between the frame posts.
We use bolts and washers to secure the support strips for the backrest.
We place the round dowel on the glue in the drilled hole of the planks without gaps.

It's time to make a fabric seat. We put 2 pieces of fabric together with the right sides inward, stitch them, retreating 60 mm from the edge. On one side we leave a section of about 100 mm unsewn.
We turn the workpiece inside out and sew the sides along the length.
We lay cavities (for wooden dowels) along the width on both sides and stitch them.
We thread the dowels through the long holes of the fabric.
After finishing finishing work With wooden base(grinding, coating protective agent, painting) place the seat in place.

A folding chaise lounge for your dacha is ready. Drawings and images helped create a practical, comfortable, lightweight chair for outdoor recreation.

A lightweight folding chair is a practical and comfortable thing in all respects. With the help of such a chaise lounge, you can equip any corner of the garden in five minutes. cozy place for a family holiday or receiving guests. If necessary, it will not be difficult to fold up an impromptu “living room” and move it to another place: take it out into the sun or, conversely, remove it from the sun into the shade. Of course, in rainy weather, mobile furniture (especially with fabric seats) will have to be brought into the house. But you can be sure that it will not take up much space.

To make a sun lounger with your own hands you will need
dry planed board
broom handle, diameter 30 mm
durable fabric
plastic plugs
furniture screws (confirmed)
furniture bolts

The sequence of making a wooden sun lounger with your own hands

1. Cut the board into pieces.
For the back legs - 125 cm, for the seat legs - 100 cm, for the stops - 59 cm. Cut all parts, except the seat legs, lengthwise into two equal parts - 5 cm each.
2. Seat legs with 3 levels of backrest tilt adjustment. Drill 3 holes D=35 mm in the workpiece at a distance of 13, 20, 27 cm from the edge. Cut the piece in half lengthwise with a circular saw.

3. Back legs. Drill holes D=5 mm at the ends for confirmations. Expand them to a depth of 5 mm: from the front side to D=30 mm (for the crossbars), on the back side - to D=16 mm (for the plugs). Drill holes D=6 and 8 mm for bolts and ties.
4. Crossbars. Cut the broom cuttings into segments: 57 cm for the back legs (2 pieces), 51 cm for the seat legs (2 pieces), 64 cm for the stop (1 piece). Drill holes with a diameter of 5 mm at the ends (for confirmations).

5. Drilling holes. At the ends of the stops, drill holes with a diameter of 5 mm for the crossbar and 6 mm for the bolts.
6. Fold the fabric in half lengthwise, sew, and turn right side out. Fold the ends and sew. The length of the finished seat is 112 cm. Thread the crossbars into the loops.

The main thing in a DIY chaise lounge chair is its folding design. If you managed to assemble everything correctly and carefully wooden elements, then you can fantasize.

The seat gives real scope for creativity!
You can choose camouflage fabric and a “military” style for it, or you may prefer romantic “ladies’” flowers.

A “seat” assembled with wooden planks will look original.

Do-it-yourself wooden sun lounger: video

Other popular chaise lounge models

Fabric chaise lounge

The figure shows a drawing of a popular folding chaise lounge, the design is the same as above, the dimensions have been changed. Anyone who has made such a chaise longue in these dimensions, please leave a comment.

1 – rail 20 x 50 x 1300 mm – 2 pcs.
2 – rail 20 x 50 x 1930 mm – 2 pcs.
3 – rail 20 x 50 x 590 mm – 2 pcs.
4 – rail 20 x 50 x 580 mm – 1 pc.
5 – rail 20 x 40 x 520 mm – 2 pcs.
6 – rail 20 x 40 x 560 mm – 2 pcs.
7 – fabric 530 x 1400 mm – 1 pc.
8 – screw M8 x 50 – 4 pcs.
9 – screws 6 x 45 – 2 pcs., and 6 x 60 – 8 pcs.

Do-it-yourself chaise lounge for a summer cottage

In such a chaise lounge, the frame itself serves as both the legs and the base. The design is created in such a way that it is comfortable to sit and a chaise lounge without legs. When manufacturing, pay attention to the correct cutting at an angle of the ends of the side parts blanks.

Comfortable DIY wooden sun lounger

It’s easy to make such a chaise longue with your own hands, and no matter how craftsman you are, the exquisite shapes and practicality of such a chaise lounge will always decorate your place of relaxation. It is easy to make even for beginners.

Step-by-step production and accurate drawings will help you make a useful and comfortable furniture for relax.

A dacha plot should not be considered only as a place of permanent labor “slavery”. At the dacha and during countryside holiday You will need a folding chair - a chaise longue. This type of furniture is comfortable, laconic and functional. Folding chair You can make it yourself and use it to spend your free time pleasantly.

Helpful information

Two French words longue and chaise have been combined into one - chaise lounge, the literal translation of which is “long chair”. Most often, such pieces of furniture can be found on the beaches of sea resorts, along the sides of swimming pools. You can also use a sun lounger in summer cottages, on long-distance trips, on picnics, etc.

A sun lounger should not be confused with sun loungers, which are a favorite place for sunbathing near the sea. The difference between these two types of furniture lies in the names themselves. A lounger is furniture for lying on, essentially a bed, only less comfortable. This design is lower and wider than a chaise longue.

“Long chair” is an object with a back, like an armchair, and with an elongated seat - a place to place the legs at full length. Sun loungers can have, like armchairs, armrests, the back can accept different positions by adjusting the angle of inclination.

Functions

The popularity of the sun lounger among vacationers is associated with its functional features. A chaise longue is:

A remedy for resting the spine and adjacent muscles. In the reclining position, the back muscles, which are heavily loaded by summer residents in the garden beds, relax as much as possible.
Comfortable furniture, easily folded and carried (or transported) from one place to another.
A piece of furniture in which the backrest can be adjusted from a sitting to a lying position.
Part of the design solution for a summer cottage, veranda or terrace. Looks beautiful and stylish Vacation home, near which there is such furniture.
A place for relaxation for people of different sizes. Reliable designs can withstand up to one hundred kilograms of live weight.

Constructions

There are several design features sun loungers:

classic folding ones (with reclining backrest);
anatomical;
hanging;
in the form of a rocking chair.

Traditionally, chaise lounges are a structure in the form of a chair-bed, the upper part of which is similar to the back of a chair (armchair), and the lower part is like a small sofa. The advantage of such models is the ability to change the position of the backrest.

To make it easier to move wooden sun loungers, some types are designed with wheels that can easily transport them to any relaxation spot.

Modern industry produces anatomical sun loungers, whose manufacturers strive to reproduce the natural curves of the human body. How comfortable and practical they are can be judged by the people who bought such pieces of furniture.

Some designers like to experiment with the shape of sun loungers, but not everyone can afford to buy such models. If you are ready to amaze your guests with the bizarre shapes of such furniture, then you will have to shell out a fairly large sum.

The suspended mounting of the chaise lounge provides it with another additional function - the ability to swing. This design is attached to a metal frame with a reliable lock, so it is very reliable. This structure is installed in a shady place (under house sheds or near large spreading trees) or an additional detail in the form of a small canopy is built in its upper part. Swinging in such a lounge chair is pure pleasure!

The stable and solid support of the “long chair” can be replaced with rounded hoop legs. In this case, the chaise lounge will serve as a rocking chair. This model is also not tied to a specific place, so this chaise lounge can easily be folded and moved to another part suburban area or the place where you settled down to relax.

Photo gallery: types of sun loungers

Metal carcass with a fabric base make this design especially light
Relaxing in such a chaise lounge can be combined with rocking like on a rocking chair
Relaxing and swinging are the main functions of this design.
this design follows all the curves of the spine and resting on it is pleasant and useful

Connecting parts

The appearance of the “long chair” may vary depending on how the connections of the structural parts are made.

Taking this parameter as a basis, sun loungers can be divided into structures:

In the form of a monolith (a rigid, durable connection of all components. In this model, it is impossible to change the angle of the backrest and it is difficult to carry the chaise longue due to its heavy weight).
Monolithic-mixed (the presence of insert elements gives the structure a more beautiful appearance, but still does not add mobility).
Folding (the use of special mechanisms and components gives such sun loungers the ability to easily and quickly transport and change the position of the backrest).
In the form of a frame with fabric (a durable fabric is stretched over an aluminum, plastic or wooden frame).

A chaise longue can be purchased in a store, or you can make it a real “landmark” of your suburban area by applying your skills and efforts. Even the most inexperienced craftsmen can construct this piece of furniture independently.

Choosing material

The material preferred by those who like to lie on a sun lounger is wood. Wooden sun loungers They are environmentally friendly, easy to use and not too expensive.

In addition to wood, completely different materials can be used for a sun lounger:

plastic;
rattan, wicker, hemp;
wooden pallets;
logs;
corrugated cardboard;
fabric with a wooden or metal frame;
plywood.

Photo gallery: using different materials for chairs

Instability to climate change and heavy loads is compensated by the originality of the design
By choosing this option you can save a lot of money
Such a creative place to relax will become a real decoration of a suburban area.
Comfortable, lightweight and mobile option for a chaise longue
Using plywood, you can build a sun lounger unusual shape
The environmental friendliness of the material used makes this design very popular
Plastic is suitable for sun loungers installed near natural bodies of water and in swimming pools

Characteristics of materials

Each of these materials has its own pros and cons.

Table: characteristic features of materials for a chaise longue

Chaise lounge material	Advantages	Flaws
Wood	Environmental friendliness Easy to care for Availability Low price	In the absence of special treatment, it is subject to rotting; there are not many options for the shape of the structure.
Metal	Durable construction with simultaneous lightness. Low weight of the structure is most often achieved when using aluminum frame with fabric center.	It is necessary to have welding skills when creating a frame; without impregnation with anti-corrosion agents it will not last long.
Plastic	Lightness, unusual design solutions, does not require maintenance costs. Low price.	Plastic structures are not very durable and do not withstand the aggressive influence of the climate. It's not easy to build on your own.
Bamboo, rattan, hemp, wicker	Mobility, environmental friendliness, light weight.	The construction of such pieces of furniture requires skills in weaving; they can dry out under prolonged exposure to the sun, and are not resistant to changes in atmospheric conditions. High price.
Available materials (pallets, logs, remains of bars and boards)	Cheap raw materials. Sometimes these materials are completely free. You can make a model “for yourself” by building a real exclusive.	Requires application skillful hands and skills in craftsmanship. If done incorrectly, they can be fragile and will not last long.
Cardboard	Availability, cost-effectiveness, ease of manufacture.	Unresistant to moisture and heavy loads.
Textile	Environmental friendliness (if used natural material), mobility, lightness.	Fragility, instability to withstand heavy weight. The fabric may fade in the sun. Discomfort may occur when using unnatural materials.

The choice of material depends on the chosen model, on material capabilities, as well as on the functions that you want to provide to a hand-made product.

When buying material for constructing a sun lounger, do not try to save much, because your safety and comfort depend on the strength of the structure. If you like fabric coverings, purchase durable and natural materials - tarpaulin, linen, cotton with a strong weave of threads, denim, canvas. Also use reliable fasteners to connect parts - thick ropes, carabiners, etc.

A wicker product will last longer if you properly prepare the vine or buy raw materials for weaving from trusted manufacturers. This material is quite expensive, but how pleasant it will be to use such a design for a long time. When preparing raw materials for weaving yourself, try to study all the information about it or consult with the craftsmen. If you have macrame skills or know how to knit, then you can weave the central part of the chaise lounge from strong threads.

The metal tubes that you want to use to create the frame should not be very worn; check them for the presence of rust. Treatment by special means will help extend the life of metal pipes. Old frames (for example, from folding beds) or chopped ones can be used required sizes pipes.

The wooden components must be perfectly smooth, so don’t be lazy to sand them in advance. When purchasing wooden raw materials, make sure that the material is free of resin areas, otherwise relaxing on a lounge chair with resin may be ruined.

You should not choose improvised materials based only on their cheapness. Be sure to think about the safety of their use. Environmental factor also worth taking into account.

Making drawings

In order for the structure to be strong and the product to look great (without distortions or other flaws), it is necessary to first build a diagram and make a drawing of the future structure.

Internet resources offer a large number of ready-made schematic images of sun loungers with marked dimensions. You can use them by adjusting the parameters to suit your idea or take the entire drawing.

Photo gallery: drawing options

If you want to surprise everyone, take note of this drawing
Sitting comfortably in a chaise lounge of this design, you can fully relax
After studying the drawing, you can build furniture for two people to relax
A wooden frame and durable fabric are necessary to create such a structure.
Use this drawing for a slatted chaise lounge design

We prepare the tools and count the amount of material

Materials and tools for making your own sun lounger may vary depending on the chosen model.

Let's give an example for a chaise lounge made from mixed materials of wood and fabric. For a fabric chaise lounge with wooden frame you need to prepare:

two meters of durable fabric (denim, canvas, canvas) fifty centimeters wide;
pairwise wooden slats 0.25 by 0.6 cm (corresponding to this length - 110, 120 and 62 centimeters);
slats made of wood (oak, birch, beech) 2 by 2 centimeters (one 65 cm long, and two 50 cm each)%
PVA glue or any other furniture glue.

Tools that will be useful:

drill;
electric or hand saw;
sandpaper with the smallest cross-section;
needle file;
square;
roulette;
nuts, bolts of suitable sizes or other fasteners.

If you build a chaise longue from other materials, the quantities and tools used will be different. Welding machine, an angle grinder will be needed for metal products, structures made of rattan, jute, wicker will “require” application special devices for weaving.

Before starting work, try to find as many more information on making sun loungers with your own hands and only then get to work.

How to make a sun lounger out of wood with your own hands: progress of work

Let's talk about the process of constructing a “long chair” from wooden material. Wood is the most affordable and environmentally friendly material. It can be freely purchased without special costs. Many people who like to create something with their own hands can work with wood.

So, it’s time to move from words to action.

Stage 1. Marking and preparation of frame components.

To do this, we need to saw off four boards with the following parameters: 400 * 2.5 * 8 cm. We will also need three bars 400 * 5 * 10 cm. We also need two fixing pins.

It is advisable to sand all wooden parts of the frame and coat them with a special impregnation against rot and mold.

Stage 2. Frame construction.

This frame is made from wooden beam according to the diagram.

Stage 3. Making a place for sitting/lying.

First, we cut boards of sixty centimeters. The number of such blanks may vary and depends on the size of the gap between the boards. Usually for standard size a chaise longue 60*200 cm takes about thirteen boards while maintaining a distance between them of one centimeter.

Using a screwdriver, we attach the boards to the frame, trying to maintain the parallelism of the arrangement of the wooden pieces.

Stage 4. Installation of legs.

We choose the length of the legs to be 35 cm, but you can make the chaise lounge a little lower (if desired).

We duplicate wooden blocks of the required length and secure them at the headboard and at the feet. In principle, the legs on the side of the head can be made single.

Stage 5. Creating a backrest.

The back frame should fit freely into the structure that we built earlier. We make the frame with the following parameters - two parts 88cm each and three parts 39cm each. Don’t be surprised that there are gaps around the perimeter of the backrest inserted into the frame; this is necessary for the backrest to recline freely.

We attach slats to the back frame required length. This can be done across, both on the main part, and along, as in the figure. Try to embed the screws in the “body” of the wood to make using the sun lounger safe. To improve the aesthetic appearance, the top of the slats can be rounded.

Stage 6. Attaching the back to the base.

To firmly fasten the back and base together, you need to drill through holes in these parts, moving 9 cm down from the edge. Insert the mounting pins and secure them.

Stage 7. Construction of the support mechanism.

For support, you need to cut grooves in the main structure - two on each side. The first is at a distance of nine centimeters from the pin with dimensions of 5 by 10 cm. The second notch is cut twenty centimeters from the first, its dimensions are slightly smaller - 5 by 5 cm.

The backrest position is adjusted in this model using a wooden beam 60 cm long, which is installed in the first (half-sitting position) or second (half-lying position) grooves.

You can adjust the backrest tilt using other simple mechanisms. For example, based on the principle of folding a cot.

Stage 8. Product finishing.

Finishing work can be carried out according to your ideas or use the materials that you have on hand. Painting, varnishing, decoupage - all this will change the appearance of the chaise lounge and increase its service life.

There are other ways to make a sun lounger with your own hands. You can use a metal frame from an old folding bed and build a chaise lounge with your own hands. A detailed description of all the manipulations is in a fascinating video on this topic.

Video: how to convert an old folding bed into a chaise lounge

Finishing

The main thing that needs to be considered in the process of making a sun lounger yourself is to increase its service life. This can be facilitated by special processing of the materials used in the construction of the structure. To do this you need to use grinder, sandpaper, anti-corrosion and antiseptics, which can be selected individually for a specific model.

Such processing can be carried out in advance, without assembling the structure. This “event” can be held after the construction of the sun lounger is completed. In this case, the protection of materials will be combined with decorative works: painting, varnishing. Choose high-quality covering materials, then your “long chair” will last a long time and delight you with its beauty.

What else can be done to change the appearance of the sun lounger? You can use textile elements: pillows, mattresses. It is best to make them removable so that you can put them away when it rains and wash them when dirty. Another option is to make mattresses and pillows from washable fabrics.

Choose the colors of the fabrics at your discretion, but it is better to use durable and dense ones. Another criterion for choosing a material is that it must be hypoallergenic and pleasant to the body, because relaxing on a sun lounger is associated with open areas bodies. You can build a bolster pillow and secure it at the top of the sun lounger for maximum relaxation cervical region spine.

Not prevent appearance chaise lounge and will improve its functional characteristics with a canopy in the form of an awning and light transparent fabric that protects vacationers from insects.

An additional element in the form of armrests will add comfort to vacationers.

And this original rocking chair is equipped with a special device for charging phones and tablets.

Care of the finished product

The durability and functionality of a chaise longue will largely depend on proper care for it. What may be included in such manipulations:

timely painting;
updating the varnish;
lubrication of backrest folding mechanisms;
washing textile items.

A DIY chaise lounge is best stored indoors for the winter. This will help you use the product for many years.

Making a sun lounger yourself is a slow process, but creative and interesting. Building a portable, comfortable place to relax will be a pleasant experience, and the result will delight you and your guests for many years. The main thing is to take a responsible approach to making a sun lounger with your own hands.