This craft is made from plastic bottles. This craft is related to ecology. environment, since polluting waste products are very a large number of, one of them is plastic, we wanted to show with this craft that from the garbage that we throw away we can make wonderful crafts who will tame our garden. This craft decorates the yard of our kindergarten.
Materials and tools
How to make a Petrunya craft from plastic bottles with your own hands? Step-by-step instructions for adults and children.
To make this craft we will need the following tools:
Let's start making a rooster from a canister:
6) Move top part canisters approximately 3 cm.
7) We bend the metal-plastic pipe (shape the legs), in my case, the rooster is walking, and attach it to the canister with self-tapping screws.
8) For the neck, from 5 l. bottles, fold the envelope, attach it to the canister with self-tapping screws.
9) From 1.5 liter bottles we cut out two “thighs”, which we attach to the canister with self-tapping screws.
For feathers we used 1.5 liter bottles. Cut off the long neck, cut the bottle into 5 feathers (we are guided by the protrusions on the bottom of the bottle), use the upper part of the feathers.
We begin to cover the body from the “thighs”. Disconnect them from the canister for convenience.
1) Attach the corrugated tube to the neck of the bottle.
2) attach the feathers using wire.
3) Attach the finished legs back to the canister.
4) Starting from the back, we cover the entire body, except the back, with feathers (we attach it to the canister with self-tapping screws). We leave the back of the neck open because there will be other feathers there.
Then the body is painted spray paint(in our case, red).
After painting the body, we cut out the head from foam plastic; it is better to use a stationery knife for cutting. We also paint her head. If the process of cutting out the head seems difficult to you, you can cut it out in separate parts and then glue it together with glue.
Using a furniture stapler and staples (you can use wire), we begin to attach the long wing feathers. The back remains open.
I cover the top of the wings with these feathers from 1.5 liter corrugated feathers. bottles
We paint it with paint, let it dry well and attach it to the body using self-tapping screws and washers. Bend the mesh for attaching the tail
.
Let's start making the tail.
We cut feathers from 2 liters or 2.5 liters. bottles into 5 parts. We paint separately on both sides. Paint can be used different colors.
A rooster made from plastic bottles is considered a difficult craft, because it requires the ability to work with absolutely different materials, use different instruments. The list of everything that will be needed for it turns out to be very large, which is why many do not take on this work and in vain. You can also find simpler options; it’s always better to start with the simple, gradually moving on to the complex.
We offer you to look at two options on how to make a rooster from plastic bottles. First the simplest option.
A small cockerel made from one plastic bottle
To make such a cheerful rooster you will need one large bottle and very few bottles of different colors. Or you can take the same ones and paint them with acrylic paints.
Take a 2-2.5 liter bottle and wash it thoroughly so that there are no traces of the label or any dirt left. Place the bottle on a stick to make it easier for you to work with. Use a marker to mark the holes for the wings, beak and comb on the bottle. The material for the beak will be a shampoo bottle, cut it out and attach it to the base. Paint eyes on the lids, glue them to the base or attach fittings. From the remaining bottles we cut out feathers for the tail, wings and comb. Attach all the parts with glue; the tail can be secured with a stapler or self-tapping screw. As a decoration, you can make fringe on the wings and feathers in the tail. And to prevent it from deteriorating from precipitation and dirt, you can coat it with yacht varnish. It will become much stronger and more interesting.
And now you can make the option a little more complicated.
Rooster made from plastic bottles
To make such a cockerel you will need more old bottles. Its design is attached to self-tapping screws, so you will need a strong base in the form plastic canister. A five-liter canister will be the body, holes for the legs will be cut in it. Make a slot on the side opposite the holes. Bend a metal-plastic tube and insert it into the holes for the legs, securing it with self-tapping screws for stability. From a couple of plastic bottles, cut out pointed toes, three for each. Put the corrugation on your legs and secure the paws.
Another couple of one and a half liter bottles serve as material for the rooster's thighs; you need to cut off the necks and thread the corrugations into them.
The head is cut out of foam plastic, rubbed with sandpaper and coated with acrylic primer. Then it is sanded again and painted with paints. A six-liter bottle will be useful for the neck. We cut off a rectangle and wrap it with a collar, which will be connected to the body with the help of self-tapping screws.
Feathers also need to be made from bottles; you will need a lot of them. For tail feathers you will need the largest bottles, at least 2.5 liters. In such work, the main thing is that the scissors are not dull, otherwise you will have to cut the plastic for a long time and painfully. There are more easy way plumage cutting. For it you only need to make longitudinal cuts, remove the bottom and neck first. Cut out semicircular or triangular shapes from below to create a finished row of feathers. You will need to attach the feathers both with glue and with self-tapping screws; we will go from the bottom so that the joints of the fasteners are not visible. Cover the entire cockerel with feathers, except the tail, to prevent it from freezing in winter. All that remains is to cut out the wings and attach the feathers to them and our craft is ready!
And for dessert, we have prepared a very interesting way for you to make an original craft from bottle caps. To.
Rooster made from plastic bottle caps
The most difficult thing in this craft is to collect all the material for it; you will need a lot of bottle caps and preferably multi-colored ones. But the result will be very colorful!
So, according to the pre-prepared diagram, glue the lids in place. The drawing is needed so as not to get confused, because redoing it is even worse, try not to confuse anything. It’s easier to glue them on the back side to hold them tighter; the cockerel will turn out very colorful even from a distance. If you have accumulated a lot of caps, you can use the leftovers to make a beautiful background in the form of floral motifs.
This is how you make a rooster with your own hands from plastic bottles. As you can see, it’s not complicated, any child can handle such crafts!
Beautiful New Year's crafts are great for decorating your home, school classrooms and rooms. kindergarten. Such products can be easily made by both children and primary and secondary school students. Do-it-yourself bright rooster made from paper, cotton pads, plastic bottles does not require special skills - they can easily be made from inexpensive and simple materials. And to make the symbol of the 2017 New Year a bright fiery one, you can use different combinations materials with colorful colors. The considered toy master classes with photos and videos are great for quick execution. They can be used for entertaining handicraft activities in schools and kindergartens. The article also presents original craft for parents - a rooster costume for a matinee.
How to make a beautiful Rooster symbol of 2017 with your own hands - an idea for kindergarten
Very bright and beautiful craft For the New Year, a rooster can be made from such simple materials as plastic bottles and plates, glasses. The unusual symbol of the year, the rooster, is made with your own hands quite quickly. It can be made to decorate a corridor or office or bedroom. This colorful craft will fit perfectly into general interior and will be a wonderful addition to the Christmas tree.
Master class materials: bright DIY rooster craft
- plastic bottles (brown) - 3 pcs.;
- plastic plates (red and yellow) - 2 pcs.;
- plastic glasses (red and yellow) - 5 and 6 of different colors;
- disposable spoon - 2 pcs.;
- yellow ball (for the pool);
- stapler, marker, tape.
Master class on making a rooster with your own hands - an interesting decor for school and kindergarten
- The top parts of the bottles are cut off and firmly fastened with ordinary tape, as shown in the photo.
- Upper parts disposable glasses cut into fringes and put on the bottle one by one. 2 top glasses and cut into fringe on the other side.
- U disposable plates you need to carefully cut off the sides. Finely cut the inner sides with scissors to create a bright fringe. Connect the parts together with a stapler.
- We make a small cut on the bottle and insert the prepared tail into it.
- We decorate the tail with gift or wrapping paper. From the remaining parts plastic plates The wings are cut out and attached to the body using double-sided tape. The ball head is also attached to the craft with double-sided tape.
- A comb, beak and “earrings” are cut out of plastic plates. The parts are glued to the rooster's head with double-sided tape. Eyes are made from disposable spoons and glued to the head. The pupils are marked with a marker.
- Additionally, you can make a small stand. For example, from a flower pot.
Original do-it-yourself paper rooster for school and kindergarten - crafts with photos and videos
It is very beautiful to make a rooster - the symbol of 2017 - with your own hands using plain paper. This craft can be supplemented with a magnet, photo, to get original decoration for the refrigerator. Do a simple rooster Both kindergarten and school students can make their own paper crafts. Entertaining New Year's craft Can handle even babies 3-4 years old.
DIY materials for the “Rooster Magnet” master class for kindergarten and school
- multi-colored paper;
- glue gun;
- PVA glue;
- magnet, photographs.
A simple and clear DIY master class - New Year's rooster 2017 for school and kindergarten
Do-it-yourself soft New Year's toy Rooster for the senior group of kindergarten and school
Not just paper or plastic crafts can be prepared in the form of a symbol of the New Year 2017. To solve this problem, you can also use felt. Beautiful New Year's toy a rooster with his own hands can become a wonderful gift for mom or good friend. The idea is suitable for middle and high school: children from primary school and it will be difficult for a kindergarten to make such a New Year's toy.
Materials for the master class DIY Rooster toy for the New Year 2017 for school
- felt;
- beads;
- needles, threads;
- padding polyester (can be replaced with regular cotton wool).
Step-by-step instructions for the master class: DIY New Year's rooster as a gift
Unusual DIY crafts for the Year of the Rooster 2017 - for school and garden with photos and videos
Every child and adult knows how pleasant it is to give and receive. new Year gifts. For such an occasion, children can make a simple craft, which can become an excellent decor for the kitchen, room, or hall. It’s not at all difficult to make gifts for the Year of the Rooster with your own hands: you just need to follow the instructions given and ensure that they are executed correctly.
Materials for the master class: DIY paper rooster
- paper plate;
- newspapers;
- paper tape;
- dye;
- PVA glue.
An interesting master class for kids - simple DIY crafts for the Year of the Rooster
Do-it-yourself small New Year's rooster made from cotton pads - crafts for school and kindergarten
Funny small rooster can be made from scrap materials. Regular cotton pads are great for this task. Even elementary and preparatory group students can make a small rooster with their own hands in kindergarten. Fun craft is a simple children's applique.
Necessary materials:
Scissors
- a set of colored paper
- box
- PVA glue
Stages of work:
Prepare boxes of various sizes. Cut off the part that covers the box from the box, make cuts along the fold lines (they should be ½ the height of the box itself). Bend the parts of the box along the cuts. The two opposite parts will be the wings, and the rest will be the tail and head. Round the wings. Cut the tail down to the very base. Cut the head, moving from the top to the very base, to create a triangle shape. Decorate the craft: make earrings and a comb.
DIY cockerel craft
You will need:Plastic bottle – 3 pcs.
- ball yellow color from a dry pool
- red and yellow plates
- red and yellow disposable cups
- black marker
- stapler
- simple tape
- double sided tape
Work process:
Cut off the top parts of 3 bottles and fasten them together with tape. Cut disposable cups along the edge. They must be attached to the rooster's neck using tape. Colors must be alternated. Cut off the edge of disposable plates, make cuts with inside. As a result, you have feathers. Gather the tail and feathers with a stapler. Insert the tail into the cut. Cover the connection area with wrapping paper. Wings also need to be cut from disposable plates. Attach the head with double-sided tape. Cut out the comb, beak and beard from red disposable plates. Insert the cut pieces into the cuts on the head. Eyes are also created from disposable plates.
DIY Cockerel 2017
You will need:Beads for eyes
- hot glue
- egg cartons
- primer
- acrylic paints
- balloon
- old newspapers
- scissors
- 2 beads
- PVA glue
How to do:
Cut two cones from the egg tray and cut one side of each cone. Connect the cut cones with the cuts facing down. You will end up with one large cone with 4 petals. To create the neck and head, connect 5 cones together. Towards the top they will expand and become larger in size. Cut a comb from the side of the tray. Cut out a beak from the lid, which will consist of two parts. Feathers are also created from cones. They are fixed on top of the cardboard with hot glue. The length of one wing is 15 cm. Make blanks for the tail in a similar way.
The next stage is creating the paws. Bend the shape of the legs from copper wire. In order to give the desired effect, twist the corrugated tube. Between corrugated and metal tube insert the remaining tail. For durability bottom part fill with glue. Cut the claws from the bottom. They should be long and narrow. They need to be secured with glue. Paint the legs and torso with spray paint.
Prepare a utility knife and construction foam. All cuts should be neat and even. You can cut out the parts separately. Finally, glue them together with glue. You can bring it to the desired shape with sandpaper. Additionally, treat with acrylic putty, wait until it dries completely, plaster again and treat with PVA glue. This will allow the paint to adhere better.
Start coloring from the head. Glue the eyes on the head. To create a beautiful scallop, make a pattern on paper, transfer it to foam plastic, cut it out, glue it on appropriate place. Start preparing the mold for the wings. Leave the back open. Cover the upper part of the wings with feathers made from corrugated bottles. Fold the last row inside the wing. Paint over it, leave to dry, attach with perforated tape and a self-tapping screw. Make a tail. Take the mesh and bend it. Cut feathers from bottles. Paint them separately on both sides. Apply black first, and then a little blue. Attach the feathers with wire to the mesh. Once the paint has dried, cut the feathers into two more pieces to make the tail appear even fuller.
You will like it too.
For the back, cut feathers from a clear bottle. The width of one feather should be approximately 2-2.5 cm. Attach them to the back, 3-4 pieces at a time. Use self-tapping screws for fastening. When you fix the feathers on the neck, cut off the top part. Glue the last row of feathers to hide the screw heads. Glue smaller feathers in the back of the head and on the side of the crest. Cover all the parts that you have painted. construction tape and bags. First apply the yellow paint and let it dry. Add some stripes orange color.
The finishing touch is blinders. Cut 2 strips, make a cut with a stationery knife. Insert them between the metal-plastic and corrugated pipe. Paint the craft with yacht varnish.
How to sew a cockerel with your own hands
You will need:Cardboard
- threads, scissors
- orange, blue-green, black and white fabric
- tweezers
- cotton wool
- scotch
- glue
- colored paper
Draw a sample of the toy on a piece of cardboard and cut it out. Draw the wing separately, cut it out, and see how they look. Cut the sample into separate parts so that it is more convenient for you to work further. Match each piece of the sample with a separate piece of fabric, cut out each piece in turn from the fabric. There should be 2 of each part. Cut the head from white fabric, the upper part of the wing and body from blue-green fabric, and the lower part of the wing and tail from black fabric. Make the beard, paw, beak, comb and eyes from colored paper. Sew all the details for the head. Sewing the comb can be a little difficult. The fact is that it is wider than the head. It is better to sew it on the outside. Glue the eyes from colored paper.
DIY cockerel costume:
For the body, make allowances of 1.5 cm. Connect the parts from the inside. Sew the tip of the foot inside. Sew the wings on the outside, put soft filling inside. If you don't have it on hand, regular cardboard will do. Sew the bottom half from the outside, sew it to the body, and connect it through the cardboard with a seam. Try the torso to the head. Sew the neck to the body. Fill the connected parts with cotton wool. You need to fill it through the hole in the tail. The hole is very small, so you need to fill the craft with cotton wool in small portions. You may need to use tweezers. Sew the tail parts using an outer seam and fill it with cotton wool.
The paws can be made from cardboard or a piece of fabric. Choose your fabric the right size and colors, make some square pieces. Trim the ends and sew the oblong legs. Fill with cotton wool. Sew the legs, wings, and tail to the body. Cut without touching the seams. The do-it-yourself cockerel toy is ready.
This is the easiest way to create crafts. There are several ways. You can use the technique of origami, quilling, cutting with scissors, etc. Paper crafts can be placed or hung on a Christmas tree, glued to a window, or decorated festive table. An excellent solution is the decor of napkins. It will look quite restrained and at the same time original. If you use origami, then the napkin can be immediately folded into the shape of a cockerel. We will provide you with the diagrams.
DIY cockerel patterns.
I would like to introduce you to the cockerel Petrunya.
Not a single yard in a village or village can do without this magnificent bird. So I made myself a friend, a bright and majestic owner of the yard!
I will be happy to share with you the stages of its production (based on the idea of making birds from plastic bottles by Alena Zinovieva).
To make the mold we need:
1) 5l. canister (I use it from under liquid soap),
2) 5l plastic bottle,
3) metal-plastic pipe (leg height approximately 30-35 cm),
4) two 1.5 l. plastic bottles for thighs,
5) screws, scissors, stationery knife, screwdriver.
For fastenings, I use these self-tapping screws (I buy them by weight at hardware stores).
Small (about 1.5-1.6 cm) - for attaching feathers and component parts to each other.
Large ones (about 5-6 cm) - for attaching the head to the neck.
1) Move the top of the canister about 3cm.
2) We bend the metal-plastic pipe (shape the legs), in my case, the rooster is walking (the right leg is pushed forward), and attach it to the canister with self-tapping screws.
3) For the neck, from 5l. bottles, fold the envelope, attach it to the canister with self-tapping screws.
4) From 1.5 liter bottles we cut out two “thighs”, which we attach to the canister with self-tapping screws.
For the feathers, I used bottles of this shape. We cut off the long neck, cut the bottle into 5 feathers (we are guided by the protrusions on the bottom of the bottle), and use the upper part of the feathers.
We begin to cover the body from the “thighs”. Disconnect them from the canister for convenience.
1) attach the corrugated tube to the neck of the bottle,
2) attach the feathers using wire.
We attach the finished legs back to the canister.
Starting from the back, we cover the entire body, except the back, with feathers (we attach it to the canister with self-tapping screws). We leave the back of the neck open because there will be other feathers there.
The next step is to start making the paws. From 2.5mm copper wire (or any other wire, preferably rigid, but not steel, which bends), we bend the shape of the legs (you can see more details in MK Filin). We create the effect of paws from a corrugated tube. We insert the remaining tail between metal-plastic pipe and corrugated tube. You can also fill the bottom with glue for strength.
We cut out claws from the bottom of the bottle (photo). They should be narrow and long. We fasten them with glue (I use “Moment of installation - liquid nails”).
We paint the body and legs using spray paint (I use universal enamel from KUDO).
We cut out the head from construction foam using a stationery knife, it is very sharp and the cuts are smooth and not torn. If the cutting process seems complicated to you, cut out all the parts separately! Then they can be glued together with glue.
By using sandpaper(medium) bring to the shape we need.
We treat the surface with acrylic putty, wait for it to dry completely and sand it again until smooth. After that, we treat it with ordinary PVA glue, so the paint adheres very well.
We begin to paint the head (you can use acrylic paints, it is more comfortable). Glue on the eyes (I bought them at a fabric store).
After fitting the head to the body, the husband said that the comb turned out not like a rooster’s, but more suitable for a chicken. I decided to redo it. I made a pattern out of paper (I tried it on for a long time to make it larger). I transferred it to foam plastic, cut it out and glued it in place of the previous one.
Using wire, we begin to attach the long wing feathers. The back remains open.
I cover the top of the wings with these feathers from 1.5 liter corrugated feathers. bottles The last row goes to the bend, into the inside of the wing.
We paint it with paint, let it dry well and attach it to the body using perforated tape (sold at any hardware store) and self-tapping screws. We bend the mesh for attaching the tail (you can increase its length and the tail will turn out richer).
Let's start making the tail.
We cut feathers from 2l or 2.5l. bottles into 5 parts. We paint separately on both sides (first we applied black, after drying a little blue)
We attach it to the mesh using wire. After coloring, I cut the feathers in half again, so the tail turned out to be more magnificent.
For the feathers on the back, I cut feathers of different lengths, from transparent bottles (this makes it easier to paint with yellow), approximately 2-2.5 cm wide. I attached it to the back using self-tapping screws, 3-4 pieces at a time.
