How to make a hunting knife with your own hands? How to make a hunting knife with your own hands DIY hunting knives at home

How to make a hunting knife with your own hands? More than one man who is interested in hunting has asked this question.

Every self-respecting hunter should have a hunting knife in his arsenal. During the hunting process, many situations arise in which a knife is simply necessary: ​​from sharpening various kinds of pegs to cutting up prey.

These days there are a great variety of stores for hunters and fishermen, where you can buy any kind of knives for money. However, mass-produced knives do not differ in durability and quality. A more expensive option is to order a hunting dagger from a famous craftsman. In this case, you can get a fairly high-quality blade. But only homemade hunting knives can bring the greatest pride and satisfaction. After all, in the process you can adjust the knife according to your desire and taste. Making hunting knives is a rather complex process and requires thorough preparation.

Characteristics of a hunting knife

In order to make a hunting knife, you need to figure out how it differs from other types.

So, in addition to performing regular cuts, it must cope with the following tasks:

• finish off a wounded animal;
• skin;
• cut up the carcass.

Based on this, we can highlight characteristics designs:

1. Straight butt for a powerful blow during finishing. For finishing, a separate blade with a central tip is often used; it is also called a hunting dagger.
2. Blade length 100-150 mm.
3. Use of harder steel grades.
4. Handle made of wood, birch bark or non-slip artificial materials, with moderate relief. It should be comfortable for cutting towards and away from you, as well as piercing movements.
5. Absence additional accessories in the design.

So, how to make a hunting knife?

Steel selection

Before you begin directly forging, you need to decide on the material from which the hunting knife will be made.

When choosing steel, one uses its five main properties:

• Hardness. The ability of steel to resist deformation. Hardness is measured using the Rockwell scale, which ranges from 20 to 67 HRC.
• Wear resistance. Metal resistance to wear. Directly related to the hardness of the steel used.
• Strength. Preserving the integrity of the blade during impacts and other damaging factors.
• Plastic. Absorption and dissipation of kinetic energy during impacts, cuts and bends.
• Red fastness. An indicator of the resistance of steel when exposed to temperature. The temperature of forging and hardening of steel depends on this indicator. Hard steel grades are the most red-resistant (more than 900 °C).

All properties are closely interconnected. The predominance of one of the indicators leads to a decrease in the quality of the material as a whole. The severity of a particular property is caused by alloyed additives and elements present in the metal.

Depending on the presence of certain alloying elements, the steel receives the appropriate marking. For example, grade U9 - carbon 0.9%, grade X12MF - contains 1.2% molybdenum and vanadium.

Of the most suitable steels for the manufacture of a hunting blade, two grades of steel can be noted that are most widespread:

• ХВ5- diamond, alloy carbon steel with high hardness (up to 70 HRC) and excellent cutting properties. The metal contains chromium and tungsten, which add strength. But with prolonged contact with water and dampness, corrosion spots may appear, so a knife made of this steel requires careful care.
• Х12МВ- stamped steel, tool steel, hardness up to 60 HRC. The composition includes: chromium - increases resistance to corrosion; molybdenum - makes steel more viscous; vanadium - increases heat resistance.

Recently, powder steel has become popular, for example, ELMAX (Sweden). The steel is quite wear-resistant and tough, and also has anti-corrosion protection. Products made from it hold an edge for a long time.

Damask steel - has exceptional hardness and elasticity, and is not subject to corrosion. Damask steel has a pronounced pattern, which is imparted by carbon steel. The damask steel blade easily copes with mechanical and thermal loads. The best hunting knives are made from damask steel.

Damascus steel is not inferior to damask steel in all respects, but requires protection from moisture and dampness. The Damascus blade has a unique pattern and holds an edge perfectly, but it must always be wiped after use and periodically lubricated with special oil.

Blade forging

Tools

We've sorted out the material, now we should talk about necessary tools and the forging itself.

For forging you will need:

• hammer up to 1 kg and hammer 4-6 kg;
• blacksmith tongs, you can use pliers with the insulation removed;
• adjustable wrench;
• vice;
• an anvil or a homemade device for an anvil;
• grinder;
• welding machine;
• grinder;
• a forge furnace or hearth, pressurized using bellows or a fan.

Before starting work experienced craftsmen It is advised to draw sketches of hunting knives, which can be made if one or another material is available. After choosing a suitable sketch, forging begins.

Forging stages

The forging process consists of several main stages, it is necessary:

1. Light the furnace and heat the metal to a certain temperature (depending on the steel used).
2. Design and forge the shank. The workpiece is subsequently held by it.
3. Formation of the future knife nose. At this stage it is purchased future form hunting knife
4. Forging the blade using minimal allowances. At this stage, the metal should be gradually forged without changing the thickness of the workpiece.

Making the handle

Making knife handles is a creative process based on their practical use. The handle should be durable, comfortable and practical. On this moment There are plenty of materials from which you can make a knife handle with your own hands. You can create various combinations of materials and use various manufacturing techniques, the main thing is that the handle of the knife with your own hands meets the individual requirements and characteristics of the owner.

Material selection

The most elegant, comfortable and most importantly - durable - are handles made from animal horns. Another advantage of this material is that it is easy to process.

The handle made of wood or ebonite may be damaged if dropped. The metal handle is strong and reliable, but not practical due to freezing at low temperatures.

The most suitable and available material The handle is made from fiberglass impregnated with epoxy ( epoxy resin), and laid in several layers. The material is light, durable and not affected by temperature. PCB is also widely used. However, to make a PCB handle, it is necessary to use a solid block, because when several pieces are glued together, the strength of the product is lost.

Step-by-step production

It should be noted that before making a knife as a whole, it is necessary to initially select the type of handle: applied or inlaid, since the shank of the workpiece for the handle is formed at earlier stages.

Making a knife handle is divided into several stages:

1. Make a sketch. On paper, draw the outline of the blade and tang, and apply a drawing of the future handle on top.
2. Measure the length and width of future overlays or “cheeks”. If the handle is inlaid, determine the number and thickness of the component elements.
3. Make a bolster and end cap from brass (aluminum).
4. If the handle is stacked, drill holes for the shank in constituent elements. If the handle is applied, drill holes for metal wads in the shank, then alternately in both blanks for the handles.
5. Put on and glue the pads or set tools using epoxy resin, tightly compress or wrap the handle blank on all sides to more securely fix the handle on the shank.
6. Finishing the handle with a file or other grinding tool. (Produced after the resin has completely dried).
7. Sanding the handle. Giving the handle a perfect smoothness and shape.

Making a scabbard

Sheaths are an integral part of quality hunting knives. They are designed to protect the blade from external negative influences, and also allow you to keep your hunting dagger always at hand. A knife for everyday use should be equipped with a collapsible sheath for easy cleaning. The sheath for a hunting knife can be made of leather and wood. Everyone chooses for themselves how to make a knife sheath.

Wooden scabbard

Necessary:

1. Cut a suitable piece of wood into two halves. If the handle is made of wood, then it is best to use a block of the same type of wood.
2. Draw on each half the outline of the corresponding side of the blade.
3. Make a recess according to the outline in the two halves of the sheath to the thickness of the blade. You should slowly adjust the recesses so that the sheath fits tightly in the future.
4. Glue the halves strictly along the edges of the recesses. A moderate coat of epoxy should be applied to prevent penetration into the blade recess. If necessary, pre-sand the surfaces to be glued for a tighter fit. You can also fasten the halves together with decorative screws.
5. Give final shapes using a file or Dremel and sand.

Leather scabbard

You will need:

1. Make a mockup out of paper and tape.
2. Transfer the pattern to the leather and cut, leaving a seam margin of approximately 7-10 mm.
3. Soak the skin in water room temperature for 20-30 minutes.
4. Cut out a thin plastic liner.
5. Protect the blade with masking tape.
6. Wrap the knife in the soaked cut leather. Commit necessary bends(you can use regular clothespins).
7. Make a pendant (trench) and form a hole in its loop. Cut a strip of leather and fold it in half, this will be the pendant.
8. After the leather has dried, glue the pendant and sew it to the sheath.
9. Glue in the plastic liner.
10. Make an expansion wedge for the top of the sheath.
11. Sew the sheath by first making symmetrical holes.
12. Soak the sheath and place the blade in it, then place it under a press to give the final shape.
13. After drying, you can impregnate the leather with shoe wax or special impregnations.

Making a knife from a file

As you know, a good blade made of excellent steel can cost a lot of money. In such cases, the question arises: how to make a knife with your own hands from scrap materials? An old, unnecessary file will come to the rescue, from which you can make a hunting knife with your own hands.

Tools and materials

Making a hunting knife with your own hands from a file must begin with selecting source material, or simply “blanks”. It is best if it is a Soviet file, since at that time they were made of very high quality steel. The shape of the file should be flat, rectangular, or better yet diamond-shaped, about 30-40 mm wide.

It is necessary to decide what the handle of the future knife will be made of and prepare materials for it. In addition, you will also need:

• epoxy resin;
• brass or aluminum rivets;
• vice;
• sharpening machine;
• sander;
• sandpaper of different grain sizes;
• magnet (necessary for hardening);
• ferric chloride (for etching).

Step-by-step instruction

1. First of all, to make a knife with your own hands from a file, draw sketch future knife.
2. Annealing. We heat the workpiece to approximately 700 degrees. When you have to make a knife with your own hands at home, you can use a gas stove. To determine the heating, use coarse table salt, pour it onto the heated area, when it begins to melt, it means the heating is sufficient. After the metal has acquired an even color, it is necessary to keep it in this state for 4 hours. Then the metal should cool slowly.
3. Blade formation. We cut off all the excess with a grinder and shape the future blade. Next, using circles of different grain sizes, they form a trigger on the knife with their own hands, a butt, and a shank for attaching the handle.
4. We produce hardening and product release.
5. Grinding and polishing the knife to the finished state. We use sandpaper, gradually reducing its grain size, and for polishing we use a felt wheel and Goya paste.
6. Attaching the handle and bring it to the final state by grinding and sanding.
7. Etching. An important step that is necessary to prevent rust on the blade.

Additional accessories

Such devices most often include a trench and a sharpener, as well as secret holes in the back of the knife and pockets on the sheath.

Trenchik

A special loop for attaching the sheath to a belt. When making a trench coat, they use various materials: rope, cord, strip of leather. Making a sheath with your own hands allows you to make a trench coat from any available material.

The trench coat can be glued, sewn, attached with a screw from the inside of the sheath, the main thing is to make a loop with a margin for any belt width. The length must be selected individually.

Sharpener

A small, fine-grained block of stone used for sharpening a knife. The sharpener is attached to the sheath and is necessary when using the blade for a long time.

Pockets

Making a knife and a sheath with your own hands allows you to fully equip it to your taste. But it is worth carefully considering the necessity, and most importantly, the practicality of this or that pocket.

When making handles for knives, some craftsmen leave a cavity in the back, into which small objects can also be placed.

How to harden steel at home

In fact, steel hardening can be done not only in a forge. It is quite possible to build a small stove on fresh air or make do gas stove. It is only necessary to create conditions to retain the maximum amount of heat near the knife. For this purpose they use heat shields, or more simply put, metal plates.

The metal must be heated until it acquires a uniform bright red color. On the edge of the blade, the metal is thinner, so it heats up more strongly and can have almost White color. A magnet will help determine the optimal degree of heat. If the magnet stops reacting to metal, it needs to be cooled. It is necessary to cool sharply, take it with pincers or pliers and dip it in a bucket of water, and some craftsmen advise dipping it in used machine oil.

After the hardening process, the metal remains “stressed” and there is a danger of crumbling. In order to prevent this, metal tempering is carried out. Place the knife in an oven heated to 200 degrees and leave for 2 hours, then turn off the oven and let the metal cool along with the oven.

Making a knife with your own hands is quite a labor-intensive task. Even using ready-made drawings for making knives and detailed instructions, on the way to success you can spoil more than one workpiece, get more than one callus, get more than one cut. But you shouldn’t stop there, because everyone can make a blade with their own hands.

The independent manufacturing process gives rise to a special attitude towards your blade and makes you appreciate the work put into it.

Video

Watch the video on how to make a hunting knife from a drill with your own hands.

How to make a hunting knife?

If you look at the store's assortment, the desired type and the type of hunting blade was never found, then there is a way out! You can make a hunting knife at home with your own hands. To do this, you just need to set aside free time, be patient, read the instructions on how to make a hunting knife yourself and prepare necessary materials with tools.

The first step on the path to a new hunting knife with your own hands will be to determine the required type of future blade. For example, at www.mens-tema.ru/ the main types of knives for hunting are blades for cutting, for skinning and for striking. The main features of a hunting knife, formed over the centuries, are the following:

• a blade with a straight spine or a curved blade is allowed;
• the edge of a hunting knife can be either cutting or piercing;
• the length of the blade must be at least 10 cm;
• the blade must be made of of stainless steel, since if the blade gets wet frequently, traces of corrosion may appear on its surface;
• It makes sense to make the handle from wood or durable plastic with a rubber base so that your fingers do not slip when gripping the knife.

To make a neat hunting knife with excellent balance with your own hands, you cannot do without specialized tools. For work you will need:

• Drill and drill bit set various diameters;
• Emery machine;
• File;
• Abrasive stones;
• Grinding wheel;
• Soldering iron.

The materials that will be required to make a hunting knife with your own hands are steel sheet (grades 65G, R6M5 and R3MZF2 are recommended) and wood or plastic for the handle. For a homemade knife, it is best, of course, to take wood, as it will be easier to work with. Walnut, maple, pear, mahogany, cherry or beech are suitable.

Next, you will need to prepare a drawing of a hunting knife and cut out a stencil that will help you create a workpiece using an emery machine. But a person who decides to make a hunting knife with his own hands should understand in advance that the procedure is long. It will be necessary to sharpen, grind off irregularities, polish the blade, attach a sleeve and a handle to it, which will need to be sharpened, given a shape that is convenient for gripping, and polished.

At the last stage, if the desire to craft still remains, you can make a simple case from leather so that the knife is kept clean and remains in perfect condition. But in the end, the hunter will have a very special blade, which he made for his needs with his own hands!

Article: How to make a hunting knife yourself?

Read also:

Monday, June 10, 2019, 10:44
As many already know, fishing for rudd is most effective in spring and summer. With the onset of autumn, this fish stops actively feeding, and is no longer in shallow water, but in deeper layers of water.

A knife is a piercing and cutting tool that people use not only in everyday life, but also in hunting. He has different shapes, blade sharpening and design. Any man can make a hunting knife with his own hands, as it is not difficult to do. The material and manufacturing technology are selected depending on the purpose of the tool.

Design features

To prevent the hunter’s hand from getting tired while working with a knife, the center of gravity of the tool is shifted closer to the handle. This reduces the load on the hand and increases cutting efficiency. The tool becomes easier to use. Features of hunting knives:

Since hunting homemade knives used in any weather; when making them, take into account what climatic zone they will apply. A tool with a solid wooden handle is used in conditions high humidity and at severe frost. Handle made from wooden material, does not freeze to the hand in frosty weather and does not slip out of the palm during humidity. There are no patterns on the handle or finger grooves. Without them, the tool is more convenient to use.

To avoid losing or injuring yourself on the knife while carrying it, it is stored in a sheath. In addition, the case protects the instrument from harmful atmospheric influences. The scabbard comes in wood and leather with straps for attaching to the belt.

Purpose of the tool

Cutting is the main purpose of a knife, but depending on the circumstances, hunters use the tool for a variety of other functions.

Using a knife:

1. They skin the caught prey.
2. Cut the carcass into pieces.
3. They finish off a wounded animal.
4. Protect yourself from an attack by an angry beast.
5. They are setting up a camp.
6. They chop branches and open cans.

In rare cases, the instrument is used as a weapon.

Making your own knife

Sometimes the products sold in the store are of poor quality or are expensive. Therefore, you can make a hunting knife at home. To make a tool you need special devices and skill in working with metal. The work consists of several stages:

You can make life-size drawings of hunting knives yourself or use ready-made diagrams. The tools you will need are an assembly table with a vice, a drill, files, diamond needle files, a current rectifier and other small tools.

Step-by-step instruction

Before you start making a knife for hunting and fishing with your own hands, prepare a drawing. The finished parts, handle and blade, will be connected using the mounting method and fixed with a rivet.

Crafting and Sharpening the Blade

The steel for the blade must have special hardness, ductility and anti-corrosion properties. Steel under the R6M5 brand has these properties. The material is commercially available and is often used to create pendulum saws.

Carbon steel grade 65 G has good resistance to corrosion. It holds an edge well due to its hardness. If such materials are not available, you can use a hacksaw or any other tool.

The blade is made like this:

Handle installation

Wood is the most suitable raw material used to make the handle. Apple, maple, ash and other dense varieties of trees produce good blanks. But the ideal raw material is birch bark. The material is placed in a container with water and boiled for 2 hours. After heat treatment it softens. It is thoroughly dried, then prepared.

Not used for handle coniferous trees. You can use a leg from an old chair or other furniture as a blank. The manufacturing and installation diagram is as follows:

Sheath for protection

Various available materials are suitable for making sheaths. These can be boards from old boxes and leather. Manufacturing process:

After making a simple model of a hunting knife, you can begin to create more complex products.

For every hunter, fisherman or tourist, a hunting knife is an essential tool that will help cope with any difficult task or situation that takes you by surprise. Of course, you can easily purchase it in a store, market, or order it from a local craftsman. But it is unlikely to satisfy the needs of an experienced user. And the dubious quality of a serial product will most likely not allow you to open even a tin can, not to mention solving more serious problems. Hunter knives self made They are of high quality and look great if you take their production seriously. However, as a product produced and developed with one’s own hands, a hunting knife can become a reason for pride.

Making a hunting knife

So, the only one the right decision In order to acquire a truly high-quality accessory, all that remains is to make it yourself, adapting it as much as possible to your needs. Not only a professional, but also an ordinary amateur can make hunting knives with his own hands. For this it is enough to have minimum set tools. Moreover, getting detailed drawings of hunting knives will not be difficult. If necessary, you can make them yourself; for this you do not need to have any supernatural skills.

Blade making

How to make a hunting knife durable and beautiful at the same time? The first step in making this cutting accessory is finding the blade. It is not necessary to look for a special steel for a hunting knife for this, especially since it is not so easy to get. It is enough to find a ready-made blade, old or broken, and modify it. Refinement may consist of changing its shape, recessing the handle, maximally adapted to the hand, and making a sheath. But still, if steel for a hunting knife is found, then this blade will be the most durable and high-quality with a beautiful metallic sheen.

Making the handle

Various materials can be used to make the handle. For example, a wooden or ebonite handle can be very comfortable, but very vulnerable to shock or other physical influences. As soon as such a knife is dropped on a hard surface, the handle immediately shatters into pieces. The most durable knife handle can be obtained if it is cast from metal. Such a hunting knife will not be afraid of blows and falls, but even in slight frost it will simply freeze to the hand, not to mention large ones. negative temperatures. Thus, accessories with very fragile or metal handles are not suitable for intensive use due to their impracticality.

Very often, good handmade hunting knives are made from the antlers of some animals, but most often these are the antlers of a deer or roe deer. Thanks to uneven surface horns, the knife fits well in the hand, which makes it as convenient to use as possible. In addition, this material is very durable and, despite this, can easily be decorated, thanks to which you can give the handle some sophistication.

To get truly durable hunting knives, the manufacture of handles should begin by preparing the fiberglass, impregnating it with epoxy resin. This material is not inferior in strength to metal, but, unlike it, it does not freeze and is very light. Textolite is also suitable for making this element of the knife. This material does not rot, is not flammable and is very durable. But when using it to make a knife handle, you must use whole piece. Gluing various elements or gluing a handle from several components will lead to loss of its strength and, as a result, fragility. To avoid having to remake hunting knives with your own hands, you need to think through all the stages of making the handle in advance.

Stages of making a knife handle

Having a finished blade, you can start making a handle on it. To do this, the plate must be ground using sandpaper or a file to give it the outline of the future handle. Then, using pre-prepared thin bars made of durable wood, they should be fixed to the handle using epoxy resin or glue. Next, you can wrap the glued bars with lace impregnated with epoxy resin, or use colored fabric tape for this. Winding should be done with maximum force to remove air bubbles and excess epoxy glue.

To create a finger rest on the handle of a hunting knife, you should use the same material, but wrap it in several layers. After the epoxy resin has dried a little, its excess can be cut off or removed with a file, giving the final shape to the handle.

Smooth or textured handle

If the task is to make an absolutely smooth surface of the handle, then at the final stage it should be tightly wrapped with durable polyethylene film or the irregularities should be sanded well and then polished. If, on the contrary, the final version should be embossed or rough, then grains must be applied to the surface impregnated with epoxy resin river sand or other abrasive and leave the product until completely dry. When the resin has completely hardened, any excess abrasive should be removed from the surface.

If the knife handle plate is much smaller in size than the intended handle, then it can be placed in a pre-prepared metal tube or a hollow handle. The existing cavity can later be used to store various necessary small items, thus increasing the functionality of the product. For example, you can put threads and needles or matches there, but provided that the cavity is completely protected from moisture. It is impossible to know what situation you will find yourself in in the future.

Making a scabbard

Scabbard like one of important elements, which are equipped with good hunting knives, must meet certain functional requirements. The knife should not fall out of them, but should be firmly fixed and at the same time easily and unhindered if necessary. The scabbard must be dismountable, which makes it possible to thoroughly clean it. With intensive use of the knife, dirt and food debris will settle in the sheath, creating an environment for the development of microorganisms and harmful bacteria. Non-separable ones are permissible for collectors and connoisseurs of aesthetic beauty, and not for practitioners who use a hunting knife almost every day. After all, it is, first of all, a tool, a means for cutting, planing and performing other important functions.

Stages of making a scabbard

To start making a sheath, you should first prepare a wooden sheath for the knife. To do this, a cavity should be drilled and ground in the workpiece, strictly suitable for the dimensions of the blade. A lid corresponding in size to the first element should also be cut from the same material. When the two parts are juxtaposed, they should form a solid case. In order for the sheath to not differ in style from a hunting knife, it must be finished with exactly the same coating. After the finishing is completed, the component parts should be fastened together in several places with screws, preferably decorative ones.

Making a trench coat

The sheath hangs on the belt using a special loop - a trench. To make it, you can use scraps of leather, thick lace or scraps of strong rope. The size of the trench coat must correspond to the width of the belt and fit freely on it. It is attached to inside scabbard Can be glued with glue, epoxy resin or secured with a screw. It doesn't have special significance, it is important that the sheath is firmly secured and does not get lost during movement. You shouldn’t make the trainer very long, as a knife located too low will create inconvenience. A training jacket that is too short will make it difficult to remove the weapon from its sheath.

Additional accessories

For greatest convenience and functionality, a knife sharpener is sometimes attached to the sheath. It is necessary when using the tool for a long time. You can also make small secret pockets for storing various small items. You never know what might await you far from home and civilization. You can also attach a signal mirror to the sheath by pre-processing the cutting edges. Modification options depend on the features and conditions of use of a hand-made hunting knife. But you shouldn’t be too zealous, as some devices may turn out to be completely useless.

When making a knife for the first time, even using well-written drawings and instructions, most likely it will not be possible to avoid any mistakes and shortcomings. But don't stop there. Each subsequent independently manufactured cutting assistant will be better than the previous one in functional terms and, taking into account all the previous shortcomings, will not be able to compare with a factory-made analogue. Hunting knives, the production of which is extremely thoughtful and is not carried out in a hurry, must turn out to be of high quality and meet all the requirements necessary for the use of these products.

Knives are currently popular not only in the kitchen, but also among people who have connected their lives with extreme types of active leisure - fishing, hunting, tourism, etc.

On the market in modern times available various knives: variable models, different dimensions and designs. But none of them can replace a knife that you make yourself.

People often write on the Internet about how to make a knife with your own hands, but you have to try hard to make them.

Knives: types and basic properties

In the photographs of the knife on the Internet, you can see that each product is a creative element created from various mechanisms.

There is a large classification of knives depending on their functionality: combat, tourist, folding (for example, butterfly), knives designed for hunting, multi-tools, bivouac knives, as well as ordinary kitchen knives.

Kitchen knives are bought ready-made, but knives intended for hunting or tourism can easily be made at home yourself.

There are also knives such as survival knives, the main task of which is to help in living in conditions wildlife. This option is relevant for tourists and hunters.

The blade of such a knife is usually no more than 12 cm. This length is sufficient for cutting wood, processing game, cleaning fish or other similar actions. Small dimensions make this knife easy to transport.

When making such a knife, you should great attention pay attention to the material intended to create the blade. Steel is often preferred.

Procedure for creating a knife

To get a positive result when making a knife, you should first sketch out a drawing of the knife. In this case, you can know in advance what exactly you want to achieve in the end.

Instructions on how to make a knife at home include a number of rules.

Making a knife step by step

Cut out the blank for the future knife. Relying on finished drawing, cut out the shape for the knife.

You will need a knife sharpener. With its help, the base is brought to the required shape. And after this you will have a clear blank in your hands, where you can distinguish the places of the handle and blade.

Rough sharpening of knives. At this stage you need to clearly know what your future knife is intended for. If it is made for hunting, fishing or hiking, then it is better to give preference to the blade type of sharpening.

And, if a knife is created to function in the kitchen or in the garden, then a razor type is suitable.

Don't expect perfect sharpening at this stage, as this is just a rough draft intended to determine the future shape.

If the blade is pre-prepared, then you can start working with the handle. A variety of materials are used to create the handle - these are: wood, plexiglass, bones, thick types of leather, etc.

Note!

Having cut out a blank to create a handle, you should check whether it fits comfortably in your hand, as well as its proportionality relative to the blade. The knife handle is secured using the riveting method.

The shape for the foot handle is given using a sharpening machine.

The knife is ground and polished using sandpaper.

The final sharpening of the blade is carried out after sharpening on a sharpener, also using sandpaper.

At the end, the finished knife is polished with velvet cloth or polish.

Note!

As you can see, the process of making a knife with your own hands is not that difficult, so everyone can try their hand at this area.

You can also give the future knife the necessary and desired design. Special attention pay attention to the handle during the design process.

Knife design

Because it is by the handle of the knife that others can then judge your creative thinking and status.

Some write their names on the handles of the knife, draw certain patterns and sketches in the form of tattoos.

The simplest knife can be built in an emergency in the forest; the main thing is to find the materials necessary to create it.

Note!

You just need to find the cutting part for the knife, and then you should insert it only into the handle, which will be in the form of a piece of wood, rope or leather.

Photo of a knife with your own hands