Concrete lamps
How buy hanging concrete chandeliers, concrete lamps: concrete lamps, cement lamps– “heavy” but amazing beauty of the loft.
This is wild for you - buysuspended concrete chandeliers and concrete lamps? Concrete lamps, cement lamps – This business card a once wild, misunderstood, but nowadays in demand loft. And, yes – massive concrete with an interesting shape looks very noble (even overhead)! In order to chandeliers andconcrete lamps did not burden the space and did not “press” with their urban feel, we recommend buying chandeliers , floor lamps and table lamps made of this material - use them as a source of lighting, a decorative element in spacious rooms with high ceilings.
Hanging concrete chandeliers and concrete lamps– although heavy in weight, but light in design.
Perfect match concrete lamps with wooden metal structures and give the decor a sense of completeness and some kind of warehouse negligence.
Loft originated in the 40s in the States and was regular style design of industrial buildings, factories, factories. All production then (as well as now) was moved outside the city.
Large areas had to be somehow put in order and filled, which is why tall, heavy, simple lamps were preferred as lighting and decoration items.
Lamps for concrete ceiling we tried to mount them so that they would not interfere with production, but at the same time fully illuminate the space.
Lamp under concrete, sconce made from such rough material - it was once both cheap and cheerful.
In the 50s, the loft was recognized as bohemian, the beau monde of the West.
Lamps for concrete ceilings in the loft they didn’t just hang out in the modest studios of artists and sculptors—the owners of “elite housing” raved about them.
Now not everyone could buy a luminary made from building materials. Purchasing such a plan was considered exquisite, expensive, revered!
Lamps made of concrete, cement, concrete lamps and concrete chandeliers from our company Retro Lux are high quality lamps at affordable prices.
Buy concrete chandeliers and lamps and creating an atmosphere of space zoning is so easy! It is important to observe minimalism in furniture, use natural or organic materials in the decoration of the room, and place light sources above a specific object (painting, sofa, table).
Concrete luminaires decorate beams, pipes, load-bearing walls, bricks.
Why do they decorate? Because some parts of residential or industrial premises leave “as is” without changing anything about them.
If it's iron water pipe– they leave it, don’t mask it, don’t paint it, don’t trim it.
If it is brickwork or bearing wall– refresh it with transparent paint and highlight it with loft-style lighting. Cement lamps look harmonious with large display windows and huge doorways in a room or indoors and with “native” objects in the interior.
How to make a lamp from concrete or concrete chandelier? DIY concrete lamp impossible to create - it requires a whole technological process, therefore we recommend that you do not try your luck, but trust us! There are no flaws, inaccuracies or negligence in our products! Each product item is a whole creation of industrial style! There is no room for error!
Do you want to buy concrete lamps and idealize lighting in an industrial style?
Be prepared for the fact that you will need to stock up on a significant number of lighting devices. Don't forget to buy table lamps - they are indispensable for local lighting!
If you want to buy retro pendants, retro sockets, retro switches, or maybe you need retro wiring, try buying it all from us! Retro lamps will also interest you - we strongly recommend that you take a look at the pages of our catalogues!
Hangingbuy concrete lamps It is also worth emphasizing a certain area in the room. In the loft style, it is important to direct the light the way it comes from shop windows; it is necessary to shade parts of the room.
Lamp made of wood and concrete in the shape of a ball, black, white or beige colour will perfectly complete the country, minimalist or classic style in your apartment.
If you are interested recessed luminaires in concrete– then when installing them, leave all fasteners, handles, frames and fittings outside.
This is reminiscent of how the soffits of warehouses, workshops, and factories are located.
Cement lamps or concrete lamps? Buy practicality, reliability you can have with us! They do not crack, do not overheat, do not lose their original shape and are resistant to mechanical stress.
Such lamp on concrete pillar it can be hung without problems (as an element of outdoor lighting), it is installed in underground establishments, men prefer it in their bachelor apartments, and modern families are simply crazy about it.
Want to bconcrete lampgarageloonabuy or are you still inclined towards a wider selection of lighting products from different manufacturers? We will delight you with various models, shapes and colors according to affordable price! Because loft is more than industrial style!
Source: http://retro-luxe.ru/svetilniki-iz-betona
Outdoor concrete lamps for garden and home photo
Among those who like to make things with their own hands, concrete has become a fairly popular material due to its low cost and ease of use.
Concrete lamps are very heavy and cold, but this fact does not affect the versatility of such devices; they will fit perfectly into any interior design.
To this end, designers create various shapes made of cement, they are decorated and painted in an original way, giving it shades such as gold, silver or copper.
It is worth noting that concrete lamps made by the hands of designers are very highly valued, so not everyone has the opportunity to acquire such a luxurious product. To save your Money you can create this source light with your own hands.
Concrete lamp using a package
Before you start making this type of lamps, you need to prepare the following materials:
- milk carton. Important condition– the packaging should not allow moisture to pass through, otherwise the concrete will lose its strength. How bigger size a lamp is planned, the larger the package size should be chosen;
- a plastic bottle into which the light source should then be placed;
- dry mix for concrete.
The first step is to get rid of the folded edges of the packaging and install a plastic bottle into it. Next, you need to drill holes in the resulting structure.
Then you should fix the bottle with a bolt, threading it through the drilled holes and securing it.
Use electrical appliances the same way as before, and pay 2 times less!
You can pay 30-50% less for light, depending on what electrical appliances you use.
To preserve the moisture resistance of the packaging, the joints must be treated with sealant.
This way we get a base where the concrete will be poured. The dry mixture is diluted with water according to the rules described in the instructions for it.
The main thing here is to avoid excess liquid.
The consistency of the finished solution should be similar to shortbread dough. Therefore, water should be poured in gradually, with each particle of the mixture becoming wet.
After preparation, the concrete should be placed in a previously made form, pressing it tightly enough, thereby eliminating the formation of empty spaces.
To completely de-air the product, the bag must be shaken thoroughly.
All tools must be washed immediately after use, otherwise the concrete mixture will set, making its removal almost impossible.
After two days (that’s how long it takes for the concrete to harden), you should get rid of the bag and unscrew the bolt.
To give the concrete lamp originality, it is recommended to make additional holes in it. This will help diffuse the light flux.
A light source is placed in a plastic bottle, which is then connected to a switch. The finished device can be placed either on the wall or hung from the ceiling.
Lighting device using a bottle
They are no less popular pendant lamps made of concrete. This device Easily made by yourself.
For this purpose, materials such as a sand-cement mixture containing gravel, water, a power source, an electrical cord, self-tapping screws (designed for working with wood), a pair of plastic bottles (of different sizes), a light bulb socket, and additional accessories: knife, drill, threaded tube. First you need to prepare the bottles. To do this, you need to cut off their bottom and drill holes for the threaded tube.
The light bulb socket is secured with nuts and self-tapping screws on both sides, so the base for the lamp is considered prepared.
The next step involves preparing cement-sand mixture, after which it is necessary to fill the base (using a spoon) for the lamp, pressing down a little.
This method laying concrete helps remove excess air and also ensures uniform distribution of cement.
When the concrete becomes hard, the plastic is removed using a knife along with self-tapping screws.
Uneven surface concrete needs to be treated sandpaper, which has a grain size of 120.
The last step is to connect the cord to the light bulb and to the voltage source. Considering the weight of the concrete product, you should ensure the strength of the fastening.
Concrete garden lamp
Such products fit perfectly into general form garden plots. In addition to their main function of lighting, they serve as a decorative element.
The material for it is a sheet of plywood, whose thickness is 12 mm.
When creating a form, you should ensure that it can be easily disassembled. It is advisable to varnish the parts of the base, which will then help to detach it from the solid concrete intact.
Repeated coating with varnish will allow finished products gain shine and shimmer. The wiring of a concrete lamp can be organized using foam plastic or corrugated pipe.
The most optimal is the first option, due to which the weight of the lamp is significantly reduced and the cost of concrete is reduced.
Glue is used to secure the foam. In addition, another advantage is the ease of material removal.
If there are fragments left that are difficult to get rid of, it is recommended to use acetone, which completely dissolves the foam.
The next step is to create the formwork inside the product. For this purpose, it is possible to use both plywood and cardboard.
The main thing is that their walls have a thickness of at least 25 mm. Also, this formwork should be made in the form of a trapezoid, which will ensure ease of removal.
Foam grooves for wiring are placed in the openings.
Both ready-made and self-made cement mixtures can be used as a cement mixture.
When choosing the second option, M-500 cement is used in combination with sand (ratio of one to three). The additive can be gravel or granite chips (one part).
When diluting the mixture, it is necessary to achieve consistency shortcrust pastry. At the next stage, concrete is laid in the formwork.
DIY concrete garden lamp
To make the mixture lie more densely, you should use a vibration grinder.
Completed concrete mixture the product should be covered with plastic wrap for at least three days. This will eliminate the possibility of water leakage from the concrete and will also give it strength.
After the mixture has hardened, the formwork is removed, the lamp is sanded, and the lamp is installed.
Today, a material such as concrete is used not only for construction purposes, but also for interior decoration, representing an original and stylish decorative element.
The main advantage of the concrete lamps described above is not only unusual design, but also simplicity self-made.
In addition to lamps, due to the ability of this material to take different shapes, a variety of vases, tables and chairs, and flower pots are created.
Source: https://LustryPro.ru/svetilniki/svetilniki-iz-betona.html
From concrete to paper: lamps made from unusual materials
A folding origami lamp, a lamp with a plaster shade and a lamp with an inflatable rubber bulb - we have collected ten models of lamps made from unusual, and sometimes shocking, materials.
Concrete
Latitude concrete base pendant lights are inspired by Scandinavian design traditions.
The Beton collection (the brand’s assortment also includes lamps made of marble and ceramics – Marmor and Keramik) has five models of lamps, and each is distinguished by its own shape, born from a certain association.
In the photo above, for example, is the Air model. All models, except the Makt (“Strength”) lamp, can be made in one of three colors: white, gray or black. Makt – only gray and black.
Fittings to choose from: brass or aluminum. Lamps are manufactured at own production studios in Moscow.
Tree
Lamps made of wood are not that uncommon. One of the most interesting options The use of wood was realized by the American designer John Procario.
He learned to make - under the strong influence of steam - ash and oak planks plastic. Each bend of a wooden strip is unique, which means it is impossible to create two identical lamps.
In addition to wood, the design uses frosted plexiglass, which covers the strip LED strip– light source.
The designer admits that the idea came to him when he was thinking about the flexibility of muscles and bones.
Paper
The paper lamp was, of course, invented by a Japanese - the tradition of origami is very strong in the land of the rising sun. Designer Issey Miyake created a series of IN-EI paper lamps for the Artemide factory.
The name of the series is translated from Japanese as “shadow-darkening,” which means that the main theme is the play of light and shadows.
The material that the designer used for the light origami consists of an innovative fiber - recycled plastic. Outwardly, it is very similar to paper, but much more practical and durable.
IN-EI lamps are easy to fold and just as easy to unfold – you can learn the art of origami.
Minerals
The shade of the Catch Rock lamps by designer Lindsey Eidelman, although made of the usual glass, rests on an unusual base - raw mineral.
The choice can be either tiger's eye or malachite. Each lamp is handmade to order - all models are unique.
Catch Rock was first presented at Milan Design Week at the Nilufar Gallery.
Rubber
Making inflatable light bulbs with LEDs was the idea of a graduate of the Eindhoven Design Academy, a young conquistador of Spanish design, Nacho Carbonell.
The role of the flasks is played by a plastic bag, which is inflated when the LED is activated.
Such a lamp does not heat up or break, it is easy to transport and install, and the light can be controlled from a distance via wireless technology.
The modern polymer is made by the Formafantasma company, and the prototype is the “rubber” material of the 19th century, which was obtained by processing insect excrement.
Plaster
In addition, Nacho Carbonell likes to look at his lamps as if they were living organisms.
To create his Light Mesh tree lamps, he came up with a special plaster made from sand and textile hardener, which are applied to a steel mesh.
The coverage is obtained sand color, in places it crumbles and when exposed to light it glows with a warm soft glow.
Nylon
Incredibly strong and durable, nylon is one of the most tempting materials for 3D printing.
Swedish designers Regine Cavicchioli, Roman Hurt and Michael Kennedy used it to print their Pollen Lamps - lamps that visually replicate unusual shapes pollen when viewed under a microscope. As the basis, the designers chose particles of birch, dandelion, sunflower, grass and ash. From January to August, 20% of Swiss residents suffer from allergies caused by flowering plants. Pollen Lamps also has an educational function: for the first time, people can see what pollen really looks like.
Soft polyurethane
The use of a rubber substitute, soft polyurethane, as the main material for creating the lamp allowed German designer Simon Frambach to completely reconsider the functionality of the lamp.
His lamp looks like a rubber heating pad. Not only does it shine, but it has a pleasant textured surface that you want to touch - this is a kind of opportunity to “feel the light.”
In addition, to use Soft Light (literally, “soft light”) as a pillow, you can throw it on a chair, hang it on the back of a chair, or plug it into the gap between the wall and the bed - in a word, anywhere where there is not enough both warmth and light.
Papier mache
“The ability to make something out of nothing is what defines the aesthetics of Romanian design,” says Mihnea Ghildus, founder of the design bureau Dizainar.
To confirm these words, at the landmark exhibition IMM Cologne in Cologne, he presented a lamp “from nothing”, or rather from papier-mâché - crumpled paper combined with plaster and glue.
The unusual choice of material is “balanced” by the simple shape of the lamp: the light bulb burns inside a moon-like hemisphere. We won’t be surprised if we can replicate such an item at home.
Dried fish
The Icelanders turned out to be the most inventive. At the international exhibition Design March in Reykjavik, designers from the Dögg Design studio presented a series of pendant lamps made from dried fish.
The designers cut up fish caught in coastal waters themselves and then dried them using ancient technology learned from local fishermen.
Once the fish had acquired its structural form, it was stuffed with light bulbs, thereby transforming it from a trophy into a design object.
At the same time, the last thing the designers of Dögg Design wanted to shock anyone: their lamp is only a tribute to local traditions and crafts, embodied in household items.
Source: https://design-mate.ru/read/objects/fixtures-from-unusual-materials
Concrete lamps
Designers have increasingly begun to use concrete as a material to create lamps and chandeliers. Despite their heavy weight and coldness, such concrete products are suitable for any interior.
To do this, it is enough to give the cement a suitable shape, decorate it gracefully, and paint it in the color of gold, silver or copper. If you have some skills and knowledge, you can create cement lamps with your own hands.
This will require a minimum of materials and time. Below are a few notable methods.
Lighting fixture made of cement using a package
For creating original lamp required:
- milk carton to create formwork;
- plastic bottle for connecting a light bulb;
- dry cement mixture to create a suitable shape.
The size of the cardboard box is not of fundamental importance. It all depends on how big the lamp should be.
The main thing is that the package is waterproof, since excess moisture concrete loses its strength characteristics. The folded edges of the box need to be trimmed and a plastic bottle placed in it.
The structure should be secured with bolts that are threaded into holes previously made with a nail or screwdriver.
The dry mixture should be diluted with water according to the instructions on the packaging in which it is sold. It is important here not to pour in excess water. The thickness of the filling should be similar to cookie dough.
When the desired consistency is achieved, the prepared form is filled. When laying concrete, it is important to compact it well so that voids do not form.
At the end, you should thoroughly shake the future lamp. These actions will remove residual air.
The utensils and tools used must be immediately cleaned and thoroughly washed to remove concrete. Otherwise, you will have to throw everything away when the mixture hardens.
The finished form is left for two days, as the concrete needs to set. Then the packaging is removed and the bolt is unscrewed.
To make concrete lamps look original and the light to be more diffused, you can drill several holes in them.
A socket with a light bulb is inserted into the prepared form from a plastic bottle, the wires are connected to the switch, and the product itself is hung from the ceiling or on the wall.
Lamp using a bottle (hanging)
Making a concrete lamp using a bottle.
Other, no less interesting, are suspended concrete lighting fixtures. The products are easy to make with your own hands.
To do this you will need a strong cement-sand mixture with stone or gravel as a filler, a small amount of water, an outlet, a cord, a switch, wood screws, two plastic bottles different sizes, lamp socket, auxiliary tool in the form of a knife, drill, threaded tube.
At the first stage, bottles are prepared. The bottom is cut off and holes are drilled for a threaded tube. The cartridge is fixed with nuts and screws on both sides.
In this way, a form for a concrete lamp is prepared. After this, you can begin mixing the cement-sand mixture. When the mixture is ready, use a spoon to fill the mold, lightly squeezing from the edges.
After the concrete has hardened, the plastic is cut off with a knife and the screws are removed. Since the concrete will be rough, it is recommended to sand the surface with 120 grit sandpaper.
On last stage the cord is connected through metal tube to the socket and to the switch. Finally, it is important to check the fastenings thoroughly so that they can support the significant weight of the concrete.
Concrete ceiling lamps are made in this way.
Concrete garden lamp
Concrete lighting fixtures for the garden look very good. They not only fulfill their main purpose, but also perfectly decorate the space. You can make them quite easily with your own hands, just follow the instructions below.
At the first stage, formwork should be made from a plywood sheet 1.2 cm thick. It is important to design the mold so that it is easy to disassemble at the end.
If you repeatedly open the formwork with varnish, the finished concrete lanterns will acquire a corresponding shimmering shine.
At the second stage, it is important to carefully consider the wiring method. Two versions are offered:
- Use corrugated plastic pipe as internal formwork.
- Making a wire mold from pieces of foam.
The second method is more acceptable, since the weight of the lantern is reduced and cement is saved. You can connect the foam together with a special glue.
After the concrete hardens, the material is easily separated. If pieces remain in hard-to-reach places, there is always the option of using acetone.
As a solvent, it easily corrodes foam.
Formwork for a lamp made from a milk carton.
At the third stage, the internal formwork is created. For its manufacture, plywood or cardboard is used. It is important that the wall thickness is more than 2.5 cm.
Foam grooves for the wire are laid in the opening.
The cement mixture can be prepared from a ready-made dry mixture, but it is allowed self-cooking composition. For the second method, it is recommended to use M500 cement in a ratio of 1:3 to sand.
Gravel or granite chips are used as an additive. One part of this filler is enough. Add water until the mixture is neither too dry nor too wet, with the consistency of cookie dough.
This will be the fourth stage.
At the fifth stage, the formwork is filled with the finished mixture.
To do this, first the cement is placed in hard to reach places so that the edges of the lamp are even and smooth. Then the rest of the formwork is filled.
To prevent water from escaping from the concrete and for it to gain strength, after pouring and compacting it must be covered with plastic film. The future lamp is left in this form for at least three days.
Conclusion
Concrete has long ceased to exist building material, used exclusively for the construction of buildings, pouring screeds, and arranging foundations.
Today it is used for decorative purposes.
Cement is suitable for creating beautiful and original vases, candlesticks, chairs, garden tables and flower pots.
This material is accessible, low cost and easy to use. And most importantly, to create decorative masterpieces, a minimum of materials and quite affordable tools are enough.
Source: https://kladembeton.ru/izdeliya/obshie/svetilniki-iz-betona.html
How to make a concrete lamp
Among home craftsmen, the most popular consumable material is concrete, from which you can make a wide variety of interior items, for example, decorative lighting fixtures. This building material is quite easy to use and is inexpensive. Lamps made of concrete are quite heavy, but this does not affect their functionality. Such decorative products are perfect for any design solutions when decorating the interior of premises.
With help concrete mortar designers create interior items of a wide variety of shapes, paint and decorate them additional accessories, give the product shades of gold, silver, copper and others.
It is important to note! Concrete illuminators self made experienced designers are quite expensive. Therefore, not everyone can afford to decorate their home with such an exclusive piece of furniture.
To save your home budget, you can make such a lighting item yourself.
Do-it-yourself concrete light using a package
Before you start making a cement construction lighting fixture, you should first prepare for this event - collect all the necessary Consumables and tools.
To make a concrete lamp you will need the following materials:
- A cardboard milk bag (the larger the illuminator needed, the larger the bag should be).
- A plastic bottle for placing a light source (light bulb).
- Dry concrete mixture.
Step 1
It is necessary to release the milk carton and trim its folded edges.
Step 2
Next, a plastic bottle is inserted into the box and a through hole is drilled through them. To make this easier, it is recommended to first make small holes in these places using a nail or knife.
Step 3
It is necessary to insert a bolt into the resulting hole and secure it securely.
Important! Concrete luminaires must have a sufficiently sealed housing. It should not allow moisture to pass through. Therefore, the areas where the package meets the bolt must be sealed with sealant.
Step 4
Prepare the cement mixture in accordance with the instructions from the material manufacturer. In this case, the main thing is not to add excess water.
The finished solution should resemble cookie dough.
In this case, the mixture must be thoroughly mixed so that there is not a single dry grain.
Step 5
The free space between the bottle and the bag is filled with concrete mixture (it must be pressed well - there should be no hollow areas). To get rid of the formed air bubbles, the workpiece must be thoroughly shaken.
Important! Immediately wash the container in which the cement mixture was prepared, otherwise, when it sets, it will be quite difficult to remove it.
Step 6
The product must be given time to dry - the concrete must set well, that is, all moisture must leave it. This may take approximately two days. After this, the milk carton is removed and the bolt is unscrewed.
Step 7
In the resulting concrete blank for the illuminator, you need to drill holes of the same or different diameters.
Step 8
A light bulb is placed inside the case, wiring is made, and a connection is made to the switch.
This unique concrete lighting fixture is ready for use!
DIY concrete light using plastic bottles
No less unique are concrete lamps made from two plastic bottles of different sizes.
Consumables
- Two plastic bottles of different sizes.
- Light source.
- Cartridge with cord.
- Cement mixture.
Tool
- Electric drill with drills.
- Self-tapping screws for wood.
- Sharp knife.
- Threaded tube.
DIY concrete lamps
Recently, concrete has become a popular and fashionable addition to the interior. As a decorative element, it entered the design with the loft style in the 50s of the last century.
Today, tables, dishes, chairs, furniture facades, sinks and much more can be made from concrete.
In this article we will tell you how to do table lamp made of concrete with your own hands.
What is concrete?
Concrete is environmentally friendly pure product, which can be recycled and reused. The recipe for making concrete is quite simple. All you need is cement, crushed stone, sand and water.
The exact ratio of all components of the solution is very important, since the strength of future products depends on this. The main component of a concrete mixture is cement.
When choosing its brand, you should determine the level of load and the impact of external destructive factors.
DIY concrete lamp
Pay attention to the water you will add to the concrete mixture. If it contains components that disrupt the structure of concrete, it is better to discard it. River or lake water is ideal.
Speaking of proportions, you can see them on the back of the package. Remember that this ratio is quite arbitrary, so without precise calculations you may get an unexpected result.
Concrete in the living room interior, 40 stylish photos
DIY concrete lamps in loft style at home
To create a concrete lamp with your own hands at home, it is best to use decorative concrete.
The composition of such concrete includes natural ingredients, therefore it is safe for health.
In addition, decorative concrete allows you to imitate various coatings: wood, stone, decorative tiles, brick and much more.
No matter what type of concrete you use, it is recommended to sift it before mixing. It is important to use a construction mask that will protect the respiratory tract from harmful dust.
What do you need to make a loft lamp with your own hands?
Concrete is perfect for realizing creative ideas.
Despite the coldness of the material, such products bring comfort, warmth and will complement any interior style. Concrete can also be combined with other materials.
When making a concrete lamp, you can give it any color using special dyes for concrete.
The main advantage of concrete is its naturalness and environmental friendliness. You can easily make it yourself without using any special materials, tools or accessories.
How to make a table lamp with your own hands? You will need:
- durable cement-sand mixture;
- drill;
- cord;
- lamp socket;
- threaded tube;
- two plastic bottles of different sizes;
- wood screws.
The first thing to do is prepare the bottles. To do this, cut the bottom and drill holes in the bottle caps. The hole must be large enough to allow the threaded tube to be inserted.
Then insert the tube into the resulting holes and secure its position with nuts. Screw the resulting structure onto bottles. Use self-tapping screws to stabilize bottles.
In this way, a form for a concrete lamp is prepared.
How to make a lamp from a bottle with your own hands
Now you can start mixing the concrete. The main thing is not to overdo it with water. The mixture should resemble cookie dough.
Mix it thoroughly so that every grain of the mixture is moist.
Remember that all concrete work must be done with gloves, as concrete dries out the skin and concrete dust is not removed from the lungs.
Lay out the resulting concrete into a mold. Use a large spoon to fill the pan.
Shake and squeeze the bottle a little after each spoonful to ensure the mixture is evenly distributed.
Shake well at the end. This will help remove any excess bubbles.
Be sure to immediately wash the container in which you mixed the concrete. Otherwise, it will set quickly and will be extremely difficult to remove.
After a couple of days, as soon as the concrete has hardened, you can cut off the plastic bottles with a knife and remove the screws. Since the concrete will have a rough shape, it is best to sand its surface with 120-grit sandpaper.
The last step is to connect the cord through a metal tube to the socket and switch. Make sure that the lamp is well secured and that the fixtures can support the significant weight of the concrete.
Apartment interior in loft style - tips for arrangement
Ordinary concrete, which has an unsightly grey colour, is not particularly beautiful.
Concrete color
A concrete structure does not have to be gray and dull.
Thanks to modern technologies, mineral pigments and metal oxides, you can give concrete products any shade.
The dyes are durable and will not lose their tone during use.
The color of concrete can be changed by various methods. You can apply a layer of paint to the finished product or add coloring additives at the stage of mixing the components.
DIY loft table lamp
You can also make a concrete lamp using milk or juice cartons. The manufacturing principle is still the same: fill the mold with concrete and leave room for the cartridge. After a couple of days, remove the packaging and get a chic decoration for your home.
Concrete lamps are creative, fashionable and durable. Interestingly, if you already have cement, such a hand-made product will cost you much less than a purchased lamp. Don't be afraid to dream, fantasize and bring your ideas to life!
Love unusual items interior? Look for a lamp that matches modern interior in loft style or minimalism? This master class will help you find a solution. It will take only two hours to make an original pendant lamp from... concrete.
Basic materials
1. Cement and sand or ready-mixed cement high level strength
Advice. Two or more mixtures can be used if desired various colors to diversify the design of the lampshade. You can also use special colored dyes for concrete.
2. Wire with or without switch
Advice. It is worth paying attention to quality; do not forget that the cord must withstand the weight of the concrete lampshade. In order to be sure of reliability, you can additionally use a metal chain for hanging.
4. Tube with thread and nuts for it
Advice. These products can be purchased at a lighting store or removed from an old electrical appliance.
5. Self-tapping screws
6. Two plastic bottles of different diameters
Advice. Bottle larger diameter selected based on the desired size of the lamp and its shape. A good option Can be an ordinary two-liter container. Please note that the embossing on the bottle will also be imprinted on outside lampshade.
Advice. A bottle of smaller diameter should be without embossing. Its size must be selected so that a socket with a lamp can be placed inside. The interior space of the lampshade should not be too narrow and long, so that later you can change the lamps without problems.
9. Tin can (optional)
Tools
- Scissors
- Wire cutters
- Small drill or screwdriver (optional)
- Small spatula for mixing concrete
- Hacksaw (optional)
- Paper knife
Do not forget:
- container for mixing cement;
- cover the table surface;
- Prepare a cloth to wipe your hands and excess concrete.
Once everything you need is prepared, you can start working.
Step-by-step master class with photos
1. Cut off the bottom of a larger bottle.
2. Drill or otherwise make holes in the covers. It is more convenient to work when the caps are on the bottles. Remember that the holes must be located strictly in the middle so that the thickness of the lampshade is the same on all sides. The hole should be of such a size that the tube fits freely into it.
3. Attach the tube to the cap of the bottom bottle.
3. Attach the top bottle.
As a result, you should have a design like this:
4.Secure the sides of the bottle with self-tapping screws. This will avoid displacement.
5. Prepare the concrete mixture. Fill the form. Remember to shake the bottle as you work to ensure a firm seal against the concrete. It can also be compacted with a stick.
Advice. If you want the surface of the lamp to be smooth, use thick concrete. The liquid consistency will help create unusual effect surface covered with shells.
Advice. To make pouring concrete more convenient, you can place the bottles on a tin can (as shown in the photo below).
6. Once the concrete is compacted, you can remove the screws and tamp again by pressing on the smaller bottle. Be careful not to move the center. Shape the edge.
Advice. The edge can be either smooth or asymmetrical.
7. After the concrete has partially dried (depending on the brand used), you can carefully remove the bottles. Do not forget that at this time the lampshade is fragile and can be easily damaged.
Glass, concrete and LEDs are combined in this product to create a modern, original and stylish element lighting, which will be a wonderful addition to the interior. Details of the manufacturing process are in the given master class.
Materials
To make an LED lamp with your own hands, prepare:
LED garland;
cylindrical glass vase 26.5 cm high;
PVC pipe;
concrete mixture;
miter saw;
hot glue gun and hot glue sticks;
cling film;
electrical tape;
hacksaw;
stationery knife;
drill;
grinding machine;
plastic bottle;
foam adhesive tape;
nail;
a piece of plywood or wooden board.
Step 1. Cut from PVC pipes a piece approximately 13 cm high. This will be the mold for the concrete base of your lamp. Adjust its height yourself. Pipe diameter for of this project will depend on the diameter of the vase you took. There is no need to process the PVC part; it will become the outer wall of the mold for the concrete base.
Step 2. The cylindrical base of the lamp with an empty recess inside is to be made from concrete. To make it, you will need a small plastic bottle, which needs to be cut in height approximately 2 - 3 cm lower than the outer part of the mold.
Step 3. At the top of the concrete lamp base there should be a small rim on which the vase will be placed. To make it, glue it with inside a piece of prepared PVC pipe and foam adhesive tape.
Step 4. Cover the bottom of the mold with cling film and secure it with electrical tape.
Step 5. Dilute the concrete mixture with water in the ratio specified by the mixture manufacturer.
Step 6. Place the prepared part of the pipe on a piece of plywood. Place an upside down, trimmed and empty plastic bottle right in the center of it.
Step 7 Gradually begin pouring the concrete solution into the mold. Periodically knock on PVC wall pipes rubber mallet so that parts of the solution settle to the bottom and do not rise. As the material is poured, the plastic bottle may be pushed upward. Take a nail and lower it to the bottom.
Step 8 Take a grinder and use it to create vibrations to shrink the concrete solution. During this process, continue to hold the bottle with the nail.
Step 9 Leave the entire structure to dry completely. This process may take several days.
Step 10 Received concrete base for the lamp you need to remove it from the mold. To remove the concrete layer from the bottom side, gently tap it with a hammer.
It will be easy to remove the mold if you have greased it with oil first. If you poured concrete into an unprepared mold, make two small cuts on it with a hacksaw or saw, and remove the PVC part.
Step 11 Sand the resulting workpiece with sandpaper or a sander using a 60-grit attachment.
Step 12 Drill a hole in the top to accommodate the wire connected to the plug or other power source. From the bottom, make a small groove for the wire. This will ensure that the base of the lamp is stable on a flat surface.
Step 13 Thread the wire into the prepared hole and secure it in place using hot glue.
Step 14 Connect the LED garland to the wire. Carefully place it in the vase. To do this, pre-wind the product on any cylindrical object. Cover the concrete base with a makeshift glass cover.
Among DIY enthusiasts, concrete has become a popular material due to its low cost and ease of use. Concrete lamps are very heavy and cold, but this fact does not affect the versatility of such devices; they will fit perfectly into any interior design. For this purpose, designers create various forms from cement, decorate and paint them in original ways, giving it shades such as gold, silver or copper.
It is worth noting that concrete lamps made by the hands of designers are very highly valued, so not everyone has the opportunity to acquire such a luxurious product. To save your money, you can create this light source with your own hands.
Concrete lamp using a package
Before you start making this type of lamps, you need to prepare the following materials:
- milk carton. An important condition is that the packaging should not allow moisture to pass through, otherwise the concrete will lose its strength. The larger the lamp is planned, the larger the package should be chosen;
- a plastic bottle into which the light source should then be placed;
- dry mix for concrete.
The first step is to get rid of the folded edges of the packaging and install a plastic bottle into it. Next, you need to drill holes in the resulting structure. To facilitate this process, it is recommended to make holes in these places in advance using a nail or screwdriver. Then you should fix the bottle with a bolt, threading it through the drilled holes and securing it.
To preserve the moisture resistance of the packaging, the joints must be treated with sealant. This way we get a base where the concrete will be poured. The dry mixture is diluted with water according to the rules described in the instructions for it. The main thing here is to avoid excess liquid.
The consistency of the finished solution should be similar to shortbread dough. Therefore, water should be poured in gradually, with each particle of the mixture becoming wet. After preparation, the concrete should be placed in a previously made form, pressing it tightly enough, thereby eliminating the formation of empty spaces. To completely de-air the product, the bag must be shaken thoroughly.
All tools must be washed immediately after use, otherwise the concrete mixture will set, making its removal almost impossible. After two days (that’s how long it takes for the concrete to harden), you should get rid of the bag and unscrew the bolt. To give the concrete lamp originality, it is recommended to make additional holes in it. This will help diffuse the light flux. A light source is placed in a plastic bottle, which is then connected to a switch. The finished device can be placed either on the wall or hung from the ceiling.
Lighting device using a bottle
Concrete pendant lamps are no less popular. This device can be easily made independently. For this purpose, materials such as a sand-cement mixture containing gravel, water, a power source, an electrical cord, self-tapping screws (designed for working with wood), a pair of plastic bottles (of different sizes), a light bulb socket, and additional accessories are used. : knife, drill, threaded tube. First you need to prepare the bottles. To do this, you need to cut off their bottom and drill holes for the threaded tube.
The light bulb socket is secured with nuts and self-tapping screws on both sides, so the base for the lamp is considered prepared. The next step involves preparing a cement-sand mixture, after which it is necessary to fill the base (using a spoon) for the lamp, pressing down a little. This method of laying concrete helps remove excess air and also ensures uniform distribution of cement.
When the concrete becomes hard, the plastic is removed using a knife along with self-tapping screws. The uneven concrete surface must be sanded with 120 grit sandpaper. The last step is to connect the cord to the light bulb and to the voltage source. Considering the weight of the concrete product, you should ensure the strength of the fastening.
Concrete garden lamp
Such products fit perfectly into the overall appearance of garden plots. In addition to their main function of lighting, they serve as a decorative element. Following the recommendations described below, it is quite possible to make these lamps yourself. First you need to make the formwork. The material for it is a sheet of plywood, whose thickness is 12 mm.
When creating a form, you should ensure that it can be easily disassembled. It is advisable to varnish the parts of the base, which will then help to detach it from the solid concrete intact. Repeated coating with varnish will allow the finished products to gain shine and shimmer. The wiring of a concrete lamp can be organized using foam plastic or corrugated pipe. The most optimal is the first option, due to which the weight of the lamp is significantly reduced and the cost of concrete is reduced.
Concrete lamp for garden
Glue is used to secure the foam. In addition, another advantage is the ease of material removal. If there are fragments left that are difficult to get rid of, it is recommended to use acetone, which completely dissolves the foam. The next step is to create the formwork inside the product. For this purpose, it is possible to use both plywood and cardboard.
The main thing is that their walls have a thickness of at least 25 mm. Also, this formwork should be made in the form of a trapezoid, which will ensure ease of removal. Foam grooves for wiring are placed in the openings. Both ready-made and self-made cement mixtures can be used as a cement mixture.
When choosing the second option, M-500 cement is used in combination with sand (ratio of one to three). The additive can be gravel or granite chips (one part). By diluting the mixture, it is necessary to achieve the consistency of shortcrust pastry. At the next stage, concrete is laid in the formwork. First of all, it is recommended to fill hard-to-reach places, and then the rest of the space.
To make the mixture stick more tightly, you should use a vibrating sander. The product filled with concrete mixture should be covered with plastic film for at least three days. This will eliminate the possibility of water leakage from the concrete and will also give it strength. After the mixture has hardened, the formwork is removed, the lamp is sanded, and the lamp is installed.
Today, a material such as concrete is used not only for construction purposes, but also for interior decoration, representing an original and stylish decorative element. The main advantage of the concrete lamps described above is not only the unusual design, but also the ease of self-production. In addition to lamps, due to the ability of this material to take different shapes, a variety of vases, tables and chairs, and flower pots are created.
Well-known concrete, it turns out, is not so prosaic as to be a sign of exclusively dirty construction sites. This is a very artistic material, from which interesting crafts can be made in skillful hands.
We are ready to clearly confirm what has been said. Let's look at the photo, dear readers.
Numbers for houses
You can place such a cute thing in your garden (found on chezlarsoon).
Drawer handles
To make these things, you will, of course, need concrete itself, screws and small cardboard boxes, for example, from light bulbs. It's very simple (found on projektila and signedbytina).
Bottom for a vase
Not every interior is suitable for the design depicted. However, the novelty and remarkableness of the idea is no less (found on adailysomething).
Watch
The little thing is easy to make. Any shape and design. You just need to find a suitable mold and pour the solution into it. After it dries, the mechanism is attached (found on instructables).
Tablet stand
The basis of the product is a regular popcorn bucket.
Framed crafts
Concrete is great for small crafts. A mold, a solution, some time to dry, and now you have an original little thing in your hands. It can be decorated with a frame (found on skonahem).
Heart shaped pens
Hooks
Hook lamps are perhaps one of the most interesting projects. Why? Yes, because the idea of a new life for ordinary old things is always attractive in itself.
And the functional component of the craft is also significant. You can even hang quite heavy things on the devices - a coat or raincoat (found on instructables).
Fridge magnets
An easy item to make. The key here is to press the magnet in before the concrete completely hardens (found on athomeinlove).
Numbers for tables
The durability of the products is obvious. And after drying, they can be decorated with bright colors (found on loveandlavender).
Cutting board
The finishing touch when creating such household item there must be sanding to get the board perfectly smooth (found on adailysomething).
Candlesticks
The usual thing went into effect cardboard box milk bottle (found on chezlarsson).
You can play with the shapes and sizes of the products (found on inmyownstyle).
For creating original crafts Absolutely any available means will be useful - coins, adhesive tape, plastic cups, baking dishes (found on sayyestohoboken, signepling and naver).
Used the bottom of a plastic bottle (found on ellasinspiration).
And then the master found a simple use tin can(found on monsterscircus).
A little imagination, and here you have an original little thing (found on nimidesign).
Concrete plant pots
Items can be of any shape, different color(found on ruffledblog).
Several triangles were connected and a template was made. And they used it to make this piece of furniture (found on abeautifulmess).
Once again, the inspiration for creating a cute little thing is an ordinary plastic bottle. It is convenient because you can vary the height of the product (found on handmadecharlotte).
Flowers in concrete! And even stylish asymmetry in execution. This trinket is good as a gift (found on the site).
Here are examples of symmetrical pots of all shapes and sizes. It looks beautiful, quite modern.
Concrete lamps
Another one bright idea. When the shape for the base of the lamp has been selected, then you just need to be patient. You will have to wait a bit for the solution to harden (found on pastill).
Concrete is great for decoration lighting fixtures. It is durable and stable. In addition, you can experiment with the design to your heart’s content, casting exactly the shape you want (found on the site).
For this lamp you only need balloon. Then don’t forget to make holes for the wires and level the surface with a sponge (found on elinsvra).
A lampshade of this shape will look good in the kitchen. It can be painted in your favorite color (found on esmeraldas).
Concrete and a plastic bottle are simply made for each other. So many interesting options. The bottle is also advantageous because it is convenient to route wires through the neck (found on brit).