How to properly cover a ceiling with paper wallpaper. How to glue wallpaper on the ceiling - step-by-step instructions, types of wallpaper and surfaces. Pros and cons of ceiling wallpaper

One of the popular options for finishing the ceiling is wallpapering it. This is not only quick, but anyone can do it with their own hands. This task will require patience, attentiveness and a small amount of space. useful information. Thanks to this article, you will learn how to glue wallpaper to the ceiling quickly and easily, what is the difference between the technique of gluing non-woven and vinyl panels, and a number of other tips that will make finishing work easier.

Wallpaper - the best way finishing ceiling surface. Respectable appearance over a long period, relatively cheap material and the ability to do the pasting yourself increases their popularity. But only high-quality canvases and compliance with all the subtleties of the upcoming work can guarantee the achievement of all these advantages.

The modern building materials market provides a wide range of ceiling panels. Their main difference from wall ones is their light weight (1 m should weigh no more than 110 g) at increased density. They do not get wet, are more difficult to tear and hold firmly. There are models with the possibility of updating by painting with special solutions.

As for the structure of the material itself, there are several suitable options: vinyl and non-woven. They differ in the pasting technique. How to glue vinyl and non-woven wallpaper to the ceiling correctly, let's look at it in more detail.

Features of gluing vinyl wallpaper

Vinyl wallpaper will last about 5 years without noticeable changes in color. Their dense structure and moisture resistance allow you to stick them on yourself. To avoid noticeable joints (seams), it is recommended to arrange the wallpaper sections in a certain sequence (as in a roll). After cutting, the top and bottom are marked on them.

For vinyl products, buy special, reliable glue. It guarantees fast and strong adhesion to the ceiling area in a short time. It must be applied in an even layer over the entire canvas. After this, the wallpaper strip is folded into an “envelope”. Only after this do you begin to distribute the adhesive mass over the working surface.

Subsequent actions are universal. The wallpaper is attached to the ceiling. Then excess adhesive solution and air particles are expelled using a plastic spatula, elastic sponge or roller (depending on personal preference).

See the video for details and the procedure for sticking vinyl products.

Features of gluing non-woven wallpaper

Non-woven products do not require preliminary cutting into separate sheets, like vinyl or paper. In addition, the glue is applied only to the ceiling. This saves not only the cost of the adhesive solution, but also reduces the time for gluing. In addition, they are very dense, so they can hide surface unevenness.

Non-woven products simplify the process interior decoration, and gluing work can actually be done alone. Apply glue to working part ceiling. As the roll unwinds, attach the wallpaper to the treated surface using smoothing movements from the center of the strip. Finally, cut the wallpaper in the required place with a utility knife.

In the video you can clearly see how to glue wallpaper on a non-woven ceiling with your own hands.

List of required tools

Regardless of the type of wallpaper chosen for gluing, you will need:

Stepladder, rack.
Container for adhesive solution.
Brush, roller for distributing glue.
Tape measure for necessary measurements.
A rag, a piece of fabric.
A stationery or ordinary sharp knife.
Scissors.
Pencil, marker for marking.
A plastic spatula or roller needed to smooth out wallpaper.

The specified arsenal is quite enough for gluing the panels yourself.

Preparation of the surface and adhesive solution

Before you hang wallpaper on the ceiling with your own hands, you need to properly prepare the work surface.

de-energize sockets and other electrical outlets;
free up as much space as possible in the room so that there are no disturbances in the future;
remove old wallpaper;
Seal problem areas, joints and connections of structural elements with a special solution. Sand the areas to be corrected after drying. sandpaper until perfectly smooth;
action of direct sun rays does not have the best effect on newly pasted wallpaper, so it is recommended to close sunny side a piece of fabric or paper;
drafts, open windows and doors, the air conditioner on will only do harm, exclude their presence before gluing;
Treat the working area with a soil solution 2-3 times. Each subsequent layer is applied after the previous one has completely dried;
for convenience, mark a visible line under the first wallpaper strip.

An equally important issue in the preparatory stage is the preparation of glue. Follow the instructions. To avoid the appearance of lumps in the composition, it is recommended to add the dry mixture in small portions, stirring continuously. Leave the prepared adhesive mass for 20-30 minutes for proper swelling.

Pasting process

Let's take a closer look at how to glue wallpaper to the ceiling quickly and efficiently with your own hands.

The gluing process includes several basic techniques:

for gluing paper and vinyl, glue is applied to both surfaces (both wallpaper and ceiling). The adhesive solution is distributed evenly with a brush or roller, in the direction from the central part to the edges. The glue should be absorbed for some time; for convenience, the vinyl wallpaper is folded in half inward. Meanwhile, spread the glue over the working surface of the ceiling. After 7-10 minutes, start gluing it;
For non-woven materials, there is no need to apply glue to the canvas, only to the ceiling part. But keep in mind that the adhesive mass for non-woven wallpaper is thick. It must be applied in an even, dense layer;
Attach the first strip according to the markings. Its edge should coincide with the drawn line;
To ensure tight adhesion to the ceiling area, remove excess glue and prevent swelling of the canvas, smooth it out. Movements should be directed from the center to the side. To do this, use a rubber roller or wallpaper spatula;
Apply subsequent strips butt to the previous ones;
folds are not allowed. If they do not smooth out, then carefully separate part of the canvas and re-coat it. After that, try gluing the wallpaper again. Push excess glue to the edges of the canvas and remove with a clean cloth;
Make sure that the edges of the canvases fit tightly and correctly to the surface of the ceiling. Go over the joints several times with a spatula. This will prevent them from peeling off in the future;
the canvases should be 1-2 cm on the side wall. After drying, excess paper will be removed using a sharp knife;
this way, you should get a smooth surface without blisters or noticeable wrinkles. There is no need to worry about small folds.

They will smooth out on their own as they dry.

Additional subtleties of wallpapering the ceiling are shown in the video

Rules for wallpapering

The following recommendations from experts will help you learn how to hang wallpaper on the ceiling with your own hands so that it lasts for years.

Long or wide?

It is difficult to answer this question unambiguously. The location of the stripes can be influenced by the shape and topography of the ceiling. But in standard cases, in order to visually hide the finishing joints, it is recommended to place the canvases perpendicular to the direction of the light flux.

Wallpaper cutting

Paper and vinyl sheets must be pre-cut. When determining the length of the strip, take into account allowances of 4-5 cm for going onto the walls. The overlap allows you to avoid gaps in the event of “shrinkage” of the wallpaper when drying.

Some wallpapers require a selection of patterns. Please note beautiful view finishing depends on strict adherence to the pattern.

We glue wallpaper in the corners

The angle causes great difficulty for many beginners. The technique for sticking a corner consists of the following steps:

Carefully place the wallpaper strip into a corner and make a visible mark with a marker or pencil. Do not overdo it with embossed products so that there are no kinks left later.
Release the wallpaper and cut out the marked part.
Now you can glue the corner itself.

This technique is suitable for hard to reach places, kinks and areas under the chandelier.

Wallpaper should be glued in such a way that the glue does not have time to dry out and the material does not get wet. Speed of action is an important factor in finishing works Oh. Therefore, additional assistance is recommended. The assistant must hold the wallpaper strip, correct its position, point out visible defects, or hand over a tool if necessary.

Wallpaper hides structural imperfections, does not require regular updating and will last a long time. And in terms of price, the method is quite acceptable, especially if you glue it yourself.

This article reveals the main questions that may arise when finishing the ceiling surface with your own hands. The video will help you clearly see how to glue wallpaper on the ceiling.

The modern world of design does not stand in one place: more and more new styles, finishing materials, and approaches to room design appear. Such changes lead to the fact that the room takes on an original and non-standard look. When decorating a house, various alterations are made that affect not only the walls, but also the ceiling. On modern market building materials There is a wide range of finishing coatings for ceilings, but wallpaper remains the most popular.

Where to start

Wallpapering is a rather complicated process from a technical standpoint. The main difficulties arise when decorating ceilings, which is mainly due to the inconvenience of holding the wallpaper, and subsequently hand fatigue.

To hang wallpaper on the ceiling you will need:

The sequence of preparation and the process of gluing wallpaper on the ceiling will help you evaluate the provided video:

Features of ceiling preparation

The quality of gluing depends primarily on the preparation of the ceiling. It should be even and smooth. To achieve this result, you need to:

priming the concrete surface;
to level the ceiling, starting putty is used;
priming again;
finishing type puttying;
sanding until maximum smoothness is obtained;
and again priming.

Advice! After applying each layer, it is necessary to allow time to dry.

After preparation, all that remains is to draw a line, which will serve as a guide for correctly gluing the wallpaper. It will prevent deviations to the sides, and then the wallpaper will be laid evenly. An ideal option for drawing a line would be painting thread. It needs to be pulled and released. After this, a line will appear on the ceiling and then you can proceed to the next stage of work. You can see the best way to stick it on the ceiling in the photo:

Now comes the time to prepare the wallpaper. First of all, their required length is calculated. When cutting off the required pieces, it is necessary to take into account not only the distance between the walls, but also make allowance for bends in the corners. We do not recommend saving on this indicator; it is better to cut off a little more. The excess can be cut off later.

Another one of important points To properly stick wallpaper on the ceiling, you need to adjust the pattern. It's most comfortable to do this downstairs. After selecting the pattern, you can cut the required length and stick the stripes to the ceiling without any difficulty.

The next step is choosing the glue. Based on the wide variety of this product on the construction market, you will need to choose the type that matches the selected type of wallpaper. But the most basic requirements that are put forward for this material are a thick consistency and quick drying.

Wallpapering

Finishing preparatory stage, you can begin the process itself. First, the glue is diluted, and then applied to the wallpaper using a special tool - a roller. It is recommended to smear it from the center to the edges. This process must be carried out very carefully, since glue can get on the front side, and it will not look very nice. For better impregnation The canvas must be folded like an accordion or in half. The duration depends on the type of material chosen.

Correctly gluing wallpaper to the ceiling should be done slowly, carefully, focusing on the drawn line. Glue is applied to the area, and then the prepared piece is applied and gradually pressed to the surface. By using special tools, namely a roller or spatula, the material is smoothed and air is removed, as well as excess glue - with a sponge. Each subsequent strip is glued end-to-end to the first. The strips must fit tightly to each other, otherwise the joints will be visible. It is better to carefully coat the edges of the joints to prevent unwanted peeling of the wallpaper from the ceiling.

A special approach is required to properly apply wallpaper in the corners. A brush or pencil will help you achieve the desired result in this matter. These items allow you to gently press the wallpaper into a corner. After that small area is separated from the surface and the “extra” piece is cut out.

To make the wallpaper on the ceiling look perfect, special attention should be paid to gluing around the lamp. If there is a chandelier or other lighting object, it should be temporarily removed. A small cut is made in the canvas for wiring, and the wallpaper is glued directly to the surface. Excess areas are cut off carefully. After drying lighting fixture is installed in place.

Advice! Gluing should be done when closed windows and doors. The absence of drafts is the key to successful work. The temperature also has great importance. It should not be below +10C.

The following video will help you to glue wallpaper on the ceiling yourself:

Features of choosing wallpaper

There is a huge selection of wallpaper that can be glued to the ceiling. Most best option- this is non-woven wallpaper for painting. After their installation, you have the opportunity to change their color several times. Such products can be remade up to 15 times.

Since non-woven wallpaper belongs to the heavy class, the glue must be selected appropriately for it. It should be made on the basis of methylcellulose, which guarantees reliable adhesion to the surface

You can glue fabric, liquid, and glass wallpaper to the ceiling.

Paper type is characterized high level environmental friendliness, relatively low quality. The process of gluing them is the simplest.

Very often a controversial question arises: is it better to paint the ceiling or stick wallpaper? The answer depends first of all on people's preferences, and then on the right choice. Wallpaper should be selected to match the interior of the room, since each of them has its own characteristics.

Thus, in order to paste wallpaper on the ceiling correctly and beautifully, you need to prepare: stock up necessary tools, purchase glue, wallpaper, cut them into pieces, and also watch a video tutorial that will help you learn all the nuances of such a difficult task. With some effort, the result will always be positive.

How to properly glue glass wallpaper to the ceiling is shown in the video:

Tsugunov Anton Valerievich

Reading time: 5 minutes

As an alternative to banal painting and whitewashing, many people prefer to wallpaper the ceiling. They will hide minor flaws in the base surface - cracks, small irregularities - allowing less money and spend effort on preparing the ceiling. A variety of textures, colors and designs at a reasonable cost allows you to spread the wings of your imagination. In addition, you can glue wallpaper to the ceiling yourself, without involving professionals.

Choosing wallpaper

The selected type of wallpaper affects the pasting technology and some other features of the process. Experts recommend choosing one of the following varieties:

paper;
paper-based vinyl;
vinyl on non-woven base;
non-woven.

The choice will be influenced by the condition of the base ceiling, requirements for material and design, and financial capabilities. By the way, the paper version will cost you the least amount, while vinyl and non-woven wallpaper will cost more, but will also last longer.

Important! For the ceiling, a material with minimal weight is selected. It should not exceed 110 g/m2. m. This parameter is usually indicated on the roll label.

The nuances of working with paper wallpaper

The surface and color of canvases of this type may vary; in the simplest, the bottom layer has a rough texture, and the top is smooth. It is on this that the drawing is applied. Due to the small thickness paper sheets It’s quite difficult to stick correctly, and besides, they will repeat all the existing imperfections of the ceiling. If it is uneven, it is better to give preference to another type of finishing material.

True, construction stores also offer thicker versions of paper wallpaper - embossed. Such canvases are already less demanding on the surface.

Vinyl on different backings: which one is easier to glue?

Vinyl wallpapers differ in the type of base (paper or non-woven). It is this that influences the gluing technique and the choice of wallpaper glue:

the material on the paper backing is impregnated with glue and then applied to the surface, so gluing them to the ceiling is not very convenient, although it is still easier than ordinary paper wallpaper;
Physeline-based canvases do not need to be lubricated with glue; the composition is applied only to the ceiling, so it is easier to work with them.

Is interlining an ideal choice for the ceiling?

Wallpaper made of non-woven material made from cellulose fibers is a popular solution for the ceiling, giving it an original appearance and a soft glow. In this case, it is permissible to perform up to 12 repaints.

Non-woven wallpaper differs:

high strength - it is very difficult to break them accidentally;
no shrinkage - do not stretch when wet, do not shrink after drying;
compatibility with any surfaces;
ability to level ceilings with small defects.

Advice. If you want to cover the ceiling with minimal effort, choose wide wallpaper made from non-woven fabric or based on it. Unlike canvases on a paper backing, they do not need to be coated with glue; the composition is applied only to the surface to be pasted. This makes working in uncomfortable conditions much easier. A larger strip width will speed up the process and reduce the number of seams.

Selecting wallpaper glue

When choosing an adhesive composition, be sure to take into account the selected type of wallpaper. For ceilings, this axiom is especially relevant, because under their own weight, heavy canvases glued to the wrong glue can simply fall off.

Wallpaper glue is selected according to the following principle:

For paper wallpaper, a starch-based adhesive composition is suitable, to which special components have been added that prevent the development of fungus.
When using vinyl and non-woven wallpaper, you should choose starch adhesive with the addition of methylcellulose, which has high adhesion to the base and plasticity.
If heavy vinyl finishing materials are selected, the adhesive for them, in addition to starch and methylcellulose, must contain polymer additives and biocide.

Exist universal options adhesives that are suitable for wallpaper of any type. Their parameters are adjusted depending on the amount of added water.

When purchasing, carefully select the adhesive composition and read the instructions.

Preparing the foundation

The ceiling can be concrete, plasterboard, you can also glue wallpaper onto chipboard and plywood. Before starting the final finishing, the base should be prepared. To do this, it is cleaned, leveled, and cracks and other defects are sealed. All previous coating must be completely removed. After completing this work, the base is primed.

Wallpaper at proper preparation can be glued even to complex surfaces:

on a ceiling insulated with penoplex or polystyrene foam;
old PVC panels that you don’t want to remove due to defects on rough ceiling that will have to be eliminated;
painted surface oil paint, which is very difficult to remove and from which the wallpaper can lag.

Preparation stages concrete base are described in detail.

Read about processing drywall before wallpapering.

Ceiling markings

First of all, you need to decide whether the wallpaper will be glued along or across the long wall. You can choose the direction of the stripes according to several principles:

Based on the location of the windows. The wallpaper should run perpendicular to it, in the direction of the incident light, then the joints will not be so noticeable.
Minimizing the number of seams. In this case, the stripes are located along a long wall. Please note that the gluing process will become more complicated: long sheets are more difficult to manage, both in terms of lifting to the ceiling and in terms of aligning the joints.
Focusing on maximum ease of gluing. Working with short strips is much easier than with long ones, especially when finishing the ceiling alone. From this point of view, it makes sense to glue the canvases along short wall, across the width of the room.

First, we draw a guide line for the first strip. The easiest way to do this is with laser level or pull a string from one of the walls, along which you can place marks.

Important! If ceiling plinth not yet installed, you need to make markings so that the outer panels overlap the wall with an overlap of 2-3 cm.

Cutting wallpaper

You can make your work easier if you pre-cut required amount stripes It is calculated taking into account the parameters of the room, the width and length of the roll.

If adjustment of the pattern is required, this should also be taken care of at the cutting stage.

We glue paper wallpaper or paper-based vinyl wallpaper

These two types of material are glued according to the same principle, with one difference: paper sheets, especially thin ones, require much more careful handling. After being soaked in glue, they may tear and become crumpled.

Work order:

Apply the adhesive solution directly onto the canvas in an even layer.
We fold a piece of wallpaper, but not like for walls, in half or like an “envelope,” but like an “accordion,” and leave it for 5–10 minutes. It is important to ensure that the glue does not get on the front side.
We also apply glue to the base using a medium-pile roller.
We apply a strip of material to the marking line in any convenient corner with a slight overlap on the wall, smooth it with our hands from the center to the edges, gradually fixing the entire canvas.
Remove excess glue and air bubbles using a brush or plastic spatula, moving from the center to the edge at an angle of 45°.

One person is unlikely to be able to perform these actions efficiently; it is better to find an assistant.

Advice. You can cope with gluing paper wallpaper alone with the help of a fence that will support the canvas, and several tables or construction trestles, arranged in a row to move along them.

We glue non-woven wallpaper or vinyl on a non-woven base alone

We also combined these types of wallpaper into one group: they have a common gluing technology. Using it will help you finish the ceiling yourself, without helpers.

Apply the glue directly to the base in an even, thick layer, using a long-haired roller for this purpose. You should not cover the entire ceiling with the composition at once; it is enough to lubricate the surface to the width of a strip with a small margin.
The edge of the cut wallpaper sheet, previously rolled into a tube, is applied to the mark.

The last stage is the same for all types of wallpaper:

Excess material from the ceiling plinth is cut off sharp knife, which is supported on a wide metal spatula, used as a ruler, as in the next photo.
If the fillet has not yet been installed, an overlap of several centimeters is left, which, after drying, is cut off in the same way.

Ceiling decoration involves the use of several options. This can be a tension or suspended installation ceiling structure, painting or wallpapering. Last option has always been popular, but with the arrival of new modern technologies gradually forgotten. The fact is that the process of gluing wallpaper on the ceiling is characterized by difficulty and inconvenience. However, using wallpaper you can create unique interior, which will not be found in any apartment. Despite the decline in popularity, it is still necessary to talk about the technique of gluing wallpaper on the ceiling, at least for novice craftsmen.

There are several advantages to gluing wallpaper to the ceiling, including the following:

Insignificant material costs compared to the installation of suspended and suspended ceilings.
The original color of the wallpaper lasts longer than that of a whitewashed or painted surface. Consequently, there is no need for frequent repairs.
Porous wallpaper has good sound insulation properties.

The disadvantage of wallpapering the ceiling is the extreme inconvenience of the process, since all work must be done overhead. Therefore, it is important to know how to hang wallpaper on the ceiling for one person.

When choosing wallpapering as a method of finishing the ceiling, it is important to consider the following nuances:

It is advisable to experiment with the texture of wallpaper in large rooms. Here, finishing imperfections will be less noticeable than in small rooms.
Embossed ceilings visually make the room smaller, which is why they are also used in large rooms.
Using wallpaper you can divide a room into zones and increase the level of comfort. Thanks to this, gluing wallpaper on the ceiling studio apartment becomes practically the only finishing method.

It is very important to take a responsible approach to the choice of wallpaper; you should take into account all the factors and features of the room where renovation work is planned.

Types of material and its features

There are several types of wallpaper, each of which has its own characteristics. This should be kept in mind when choosing material for a certain type of room:

Paper wallpaper is the most common and cheapest, but is only suitable for cosmetic repairs.
Liquid wallpaper is liquid mixture. As a result of finishing the ceiling with such material, a seamless and perfectly flat surface is obtained.
Vinyl wallpaper is very popular due to its strength, durability and high resistance to moisture.
Non-woven wallpaper is durable, elastic and abrasion resistant.
Textile wallpaper is a textile fabric on a paper or non-woven basis.

In addition, there is wallpaper that can be painted, modern models This type can be painted more than 10 times. At the same time, it is not at all necessary to remove wallpaper from the ceiling.

In general, the choice of wallpaper depends on the preferences of the owner; any type of wallpaper can be used if operating conditions allow it. However, it is worth considering that in rooms with low ceilings It is better to stick light colors, it is better to give preference to small and dim patterns. To visually reduce the height of the ceiling, it is better to glue wallpaper in dark colors.

Preparation of materials and tools

To independently solve the problem of how to hang wallpaper on the ceiling, you will need the following:

Stepladder or other device for working at height.
Roulette.
Pencil or marker.
Bucket.
Brush and roller. It is advisable to use tools with long handles.
Bath with a special platform for a roller.
Soft dry rags.
Device for stirring glue.

The process of wallpapering the ceiling is characterized by great inconvenience, so it is recommended to invite friends or relatives to help. Otherwise, you will need to study materials on how to paste wallpaper on the ceiling alone.

Preparing the surface for work

To perform any finishing work efficiently, it is necessary to carefully prepare the work surface. Wallpapering the ceiling is no exception in this regard. In particular we're talking about about the following:

Old wallpaper must be removed, followed by cleaning the surface from traces of glue.
Whitewashed ceiling you need to wash it and apply several layers of putty.
Defects in the form of unevenness or slopes are leveled using putty; if there is a significant difference in height, it is recommended to use plasterboard sheets.
Wallpaper is applied to a putty ceiling after preliminary priming. You can apply the primer using a regular brush. After the primer layer has dried, sand the surface and begin gluing the wallpaper to the ceiling. It should be noted that priming the ceiling is not a mandatory procedure. However, this process makes the adhesion of the working surface to the finishing material stronger.
Before wallpapering the ceiling, it is necessary to mark the ceiling. It is important that the wallpaper is positioned perpendicular to one of the walls.
Before hanging wallpaper on the ceiling, you must turn off the power supply, and the place where the lighting fixtures are attached should be sealed with masking tape.

Rules for cutting wallpaper

A beautiful ceiling with a minimum number of flaws can only be obtained by cutting the wallpaper correctly. You can achieve this result if you follow certain instructions:

The wallpaper roll is laid face up and rolled out to the maximum possible length.
Using a tape measure, measure the distance on the ceiling between opposite walls and mark it on a strip of wallpaper. At this point, make a corresponding mark with a pencil or marker.

Bend the strip along the mark, align the ends and smooth the resulting fold.
Next, use a stationery knife to cut a strip along the fold line.

Ceiling markings

After execution preparatory activities and cutting strips required length it is necessary to make corresponding marks on the ceiling. In particular, we are talking about the line along which the first strip of wallpaper will be pasted. You can get a straight line using a rope rubbed with chalk. To do this, you need to hammer one nail into opposite walls. A rope, previously rubbed with chalk, is tied to these nails and pulled as tight as possible. Next, the rope must be pulled back and released sharply. The result of these actions will be a smooth chalk mark.

Direct wallpapering

The process of performing work at this stage is determined by the type of wallpaper selected for the ceiling. For example, when using paper or vinyl wallpaper the adhesive composition is applied to the material, and in the case of non-woven wallpaper, the glue is applied directly to the ceiling. In addition, when applying glue to non-woven wallpaper, you should wait some time, while at the same time, it is important to glue paper wallpaper immediately after coating adhesive composition.

As for the location of the stripes, there is one rule, according to which the direction of the stripes must be strictly parallel to the wall with the window opening. In this case, the joints of the strips become almost invisible.

The problem of how to properly glue wallpaper to the ceiling must be solved in accordance with specific instructions.

- Preparation of adhesive composition

In most cases, hardware stores offer ready-made adhesive compositions for each type of wallpaper. The mixture can be in dry or liquid form. You can prepare wallpaper glue according to the instructions that the manufacturer comes with its products.

In any case, the glue should be mixed well before use. In this case, the composition must have good density so that the fixation of the wallpaper on the ceiling is maximum.

- Applying adhesive to wallpaper

In order to properly glue the wallpaper to the ceiling surface, it is necessary to correctly apply the adhesive composition to the cut strips. For this purpose, you should take one strip and carefully spread it on a flat surface. The glue can be applied with a brush, making strokes from the central part of the strip to its edges. All actions must be as careful as possible; only in this case can glue get on the front side of the wallpaper.

- Gluing the first strip

At this stage of deciding how to hang wallpaper on the ceiling yourself, you are guided by several instructions depending on the number of people taking part in the process of gluing the wallpaper. If the work is carried out by one person, then the strip is folded like an accordion, the edge is applied to the intended line and the wallpaper is gradually straightened.

In this case, the material must be smoothed with a soft cloth, roller or using a special smoothing brush. Wallpaper gluing with the participation of two people is carried out as follows: one participant in the process takes the strip by the edges and climbs onto a stepladder or other device for working at height, the second participant at this time carefully holds the strip and gradually straightens it.

- Pressing stripes

In order for the strip of wallpaper to firmly adhere to the work surface, it is necessary to remove excess glue and air bubbles from under the pasted wallpaper. To do this, you can use a clean roller, rolling it in the direction from the middle of the strip to its edges. Excess glue is immediately removed with a clean rag or sponge.

- Gluing the remaining strips

The remaining strips of wallpaper are glued according to a similar pattern, so there are no particular difficulties in solving the problem of how to glue wallpaper to the ceiling. However, difficulty can be encountered when adjusting a new strip to an already pasted material. It is very important to tightly join the strips and prevent overlap. When using wallpaper with a pattern or design, it is recommended to combine the stripes while cutting the material into certain sections.

In order to efficiently resolve the issue of how to properly hang wallpaper on the ceiling, it is very important to control the absence of drafts. In addition, after the process is completed, doors and windows should not be opened for several more days.

Wallpapering a ceiling by one person can be made easier by making a device in the shape of the letter “T” with your own hands. It can be made from a plasterboard profile.

Consequences of incorrectly gluing wallpaper to the ceiling

Poor quality work and non-compliance with instructions can cause unpleasant consequences, such as a strip of wallpaper coming off the work surface.

This defect is observed very often, its cause is most often the following:

Gluing onto old, peeling plaster. The appearance of such a defect can be avoided only by thoroughly cleaning the surface from the old layer of plaster and paint. Pasting wallpaper over lime or chalk whitewash leads to a similar result. That's why experienced craftsmen It is strongly recommended that before gluing ceiling wallpaper, remove the old coating and treat the work surface with a fixing compound.

Incorrect application of adhesive. In most cases, gluing wallpaper on the ceiling with your own hands is accompanied by applying an adhesive composition either to the work surface or to the wallpaper strips. But some types of finishing material require the application of glue, both on the surface of the ceiling and directly on the wallpaper. The adhesive should be selected in accordance with the type of wallpaper, since there are adhesive compositions specifically for heavy types of this material. It is recommended to use a composition that is thicker than indicated in the manufacturer's instructions. The working surface must be pre-treated and carefully leveled. For thinner wallpaper sheets, the surface must be as smooth as possible. Thick textured wallpaper can mask minor defects, so careful leveling is not required. For good adhesion of the working surface to the finishing material, it is necessary to prime the ceiling and sand it.
Presence of air bubbles. This defect appears when the web is poorly rolled with a special roller. The switched on lighting makes the bubbles under the wallpaper especially noticeable.
Stains on the wallpaper can appear when the wallpaper is soaked for a long time or when the adhesive is applied too thickly to the material.

Rules for using wallpaper glued to the ceiling

Every owner wants repairs in an apartment or house to be carried out as rarely as possible. To do this, you need to know what is the best way to glue the ceiling, and select the material in accordance with the purpose of the room and the specifics of its use. In addition, use and care for finishing materials correctly.

Firstly, coating with varnish helps to extend the life of wallpaper glued to the ceiling.

Secondly, the use of wallpaper for painting allows you not only to change the design of the room, but also to save on finishing materials. If any parts or edges of the wallpaper come off, it is enough to coat these parts with adhesive and press them well to the ceiling with a clean roller.

Advantage embossed wallpaper lies in their ability to absorb dust and unpleasant odors. Consequently, during operation, such material requires periodic cleaning with a vacuum cleaner, dry cloth or brush. Wallpaper on the ceiling, resistant to high humidity, can be wiped with a cloth soaked in clean water.

Thus, the question of how to properly stick wallpaper on the ceiling can be called quite complex. However, if all recommendations are followed, this work is quite accessible to self-execution. The main condition when wallpapering a ceiling is to strictly follow the sequence of actions. Only in this case can you avoid difficulties and troubles in the further operation of the ceiling.

Application ceiling wallpaper has quite a lot of features - both at the selection stage and when sticking them on. We will touch on the main stages of this work, mention possible problems and their solutions, and at the end we’ll watch a video - gluing wallpaper on the ceiling with your own hands will be clearly demonstrated.

Ceiling preparation

How to prepare the ceiling for wallpapering?

Armed with a steel spatula, we completely remove all protrusions and irregularities. Was the ceiling whitewashed with lime or chalk? The whitewash is also cleaned down to the plaster.

Tip: the work will go faster, and there will be much less dust if you first wet the ceiling with water using a sprayer or roller.

If the room is damp and/or fungus has appeared in it, treat the ceiling surface with an antiseptic primer. It will not only kill mold, but also prevent it from appearing in the future.

A budget option is to use any cleaning liquid containing chlorine. It will not provide, of course, long-term protection; however, the fungus will die. By the way, it is better to clean the areas affected by it before processing to the floor concrete.

The next step is to apply a penetrating primer. It will make the surface of the ceiling much stronger, which is important when gluing heavy wallpaper. In addition, the soil will significantly improve the adhesion (adhesion) of the ceiling to the adhesive layer, and at the same time reduce glue consumption (see).

If you don’t want the wallpaper to fall, don’t be too lazy to prime the ceiling.

Preparing the ceiling for wallpapering necessarily includes puttying all noticeable irregularities. The degree of leveling depends on the type of wallpaper: the choice of embossed non-woven wallpaper will mask small irregularities, and the choice of glossy vinyl, on the contrary, will highlight them.

In the latter case, the surface must be perfectly flat. If you are new to finishing ceiling putty, it is better to use the widest possible spatula (see).

If there are any visible irregularities, stripes, or protrusions on the surface, it is better not to be lazy and sand them down. The tool is a grater with a sanding mesh or a sander.
Finally, the putty areas are re-primed with a primer (penetrating primer). After it dries, everything is ready for wallpapering. For a clearer picture, we suggest watching the video - wallpapering the ceiling.

Wallpaper sticker

What will you need?

But in fact, are any special conditions or tools? Something else?

Invite a partner. Doing this work alone is EXTREMELY inconvenient, and the result will most likely disappoint you.
Prepare a roller with a long handle. Applying glue with a brush from bottom to top is much harder and slower. The type of roller coat is not important; however, the longer the pile, the more glue it will pick up at a time.
A soft cloth will help smooth the wallpaper and remove air bubbles.

The simplest scaffolding or a high and long table covered with polyethylene will greatly simplify your work. Moving a stepladder or stool a dozen times while applying each strip is somewhat tedious.
Finally, thin out the wallpaper glue. The consistency is much thicker than usual. Wallpapering the ceiling with liquid glue is difficult if the wallpaper is thin, and impossible with thick and heavy wallpaper: it will simply fall off.

Basic Operations

Strips of wallpaper are glued in the direction from the window, so that daylight did not make the joints between the stripes noticeable. You should start from the junction of the ceiling and the wall.

The length of the strip is measured with a tape measure.
A strip of wallpaper is cut off.
The ceiling is smeared with glue along its width. Not wallpaper, just the ceiling: it’s much easier to glue this way.
One edge of the strip is glued; at the same time, the partner holds the second edge taut, checking the correct location relative to the previous strips or wall.
Then, from the pasted edge, the wallpaper is smoothed with a rag. If the strip ends up being a little longer, that’s okay; the excess is trimmed off with a sharp knife.

The last strip is cut out not only in length, but also in width. Take the time to measure the required width of the strip in both corners of the room: the walls will not necessarily be parallel.

Useful little things

Hanging ceiling wallpaper requires taking into account a number of nuances.

As already mentioned, thick wallpaper with a relief pattern hides minor surface defects. But gluing vinyl wallpaper to the ceiling requires not only filling the uneven surfaces, but also pre-sanding.
The wallpaper is glued strictly end to end. No overlaps. If the stripes overlap each other, the ceiling will look simply terrible when lit from the side.

Drafts are not allowed either when applying wallpaper or while drying the glue..

Advice: during this time it is better to provide constant temperature and humidity in the room. Close all windows and doors. During drying, the humidity in the room will be very high, so drying may take two or even three days. However, it is better to wait an extra day than to re-glue the fallen wallpaper.

The gaps between the wallpaper and the wall will be hidden by the ceiling plinth. It also sticks only after the wallpaper has completely dried (see).
Light colors make the ceiling visually higher. However, they will again make any surface defects more noticeable. Gloss gives the same effect.
It is better to paint wallpaper for painting with a water-based emulsion based on acrylic, acrylic-latex or silicone. These types of paints do not smell and provide a surface that is resistant to moisture and abrasion, which can be washed with a regular sponge and soapy water.

Conclusion

Let us draw your attention to one more nuance. If you have to level the surface of the ceiling, perhaps it makes sense to stick with regular painting? In most cases, the result is at least no worse than when sticking wallpaper, but it will take much less time and money. If you have any additional questions, watch the video on this page.

Good luck with the renovation!