How to properly glue wide meter-long or standard non-woven wallpaper on a wall: what glue to use, technique for performing the work. How to glue non-woven wallpaper - step-by-step instructions How to glue non-woven wallpaper

Wallpapering is the most important stage in the design of any interior. But every wallpaper is applied differently. After all, they differ not only visually, but also in the key material from which they are made. It is one thing to glue textile wallpaper, and another, for example, non-woven wallpaper.

Works with wallpaper professional master from a construction company

But what exactly are the differences? How to glue non-woven wallpaper so that you can do it yourself without any problems? In fact, everything is not so complicated, the main thing is to just understand general principle. So let’s figure out exactly what to do if you prefer wallpaper of this particular type.

What kind of wallpaper is this

In general, there are many types of wallpaper, for example, paper or fabric, but non-woven wallpaper is now one of the most popular. They have excellent characteristics, they are easy to stick with your own hands, they look very interesting and are suitable for most rooms.

It is worth distinguishing between two types of such wallpaper. Some are purely non-woven, others have a purely non-woven base and have a vinyl covering. The second type is popular because it copes better with moisture, so such wallpaper can be washed with your own hands. But pure non-woven wallpaper is more breathable, which means there is less chance that a large number of mold. However, it is necessary to choose based on specific needs.

Wallpaper with silver glitter in the living room

Classic non-woven wallpaper is usually called, they often have some kind of texture without a color print, so you can paint them with your own hands in a convenient way, and the paint will adhere to them much better than, for example, textile ones. However, there are also variations with prints. In general, the choice of non-woven wallpaper is huge, so you can safely choose their variations for yourself. But no matter what you choose, it is very, very important to hang the wallpaper correctly.

Preparation

Before you hang non-woven wallpaper recently purchased in a store, you need to carry out proper preparation. Without it, the gluing efficiency will not be as high; the wallpaper simply will not stick so well. So don’t be careless about this, do everything right, especially since it’s quite easy to do it all with your own hands, but the result will delight you for many years.

We begin preparations for repairs, dismantling old paintings

To begin, accurately measure the height and width on each side of the room. Approximately estimate how many rolls you will need, but do not forget to leave a few centimeters in reserve on each side. After this you need to purchase required amount non-woven wallpaper. Please note that you need to pay attention to the specific batch number that is written on the roll. Even if the wallpaper is visually similar, if they have a different batch number, then the pattern may be different, as a result there will be a slight imbalance in the room.

Leveling walls with plaster according to beacons

Next, you need to level the walls with your own hands. This is especially important if the wallpaper is wide and does not respond well to unevenness. You also need to unscrew all the sockets, they will greatly interfere. It is critical to insulate the wires, otherwise liquid may get inside the boxes. All walls are treated with primer and dried thoroughly. Moisture can not only create conditions for mold, but also simply prevent the wallpaper from sticking well. So it should be avoided.

Selection of glue

Not any type of glue is suitable for non-woven wallpaper. However, textile and vinyl also require their own mixture. So different adhesives for different wallpapers are different. Be sure to consult with a qualified salesperson in a specialized store, or at least carefully study the instructions for what this or that is intended for.

The peculiarity of non-woven wallpaper is that it soaks quickly, so you don’t need to devote some time to it, as often happens when you take textile or vinyl wallpaper.

In general, individual mixtures may have various features and methods of use, so be sure to read the instructions after purchasing, although it is clear that you do not want to do this at all.

Good French wallpaper glue

Before directly gluing non-woven wallpaper, you need to understand what the basic principle of applying glue is when gluing them, and only then start gluing. The peculiarity here is that regular wallpaper they smear the back side of the material, while for non-woven ones it is necessary to smear only the wall. You need to smear it lightly, evenly, and you also need to press the material. The material is glued from the corner, from top to bottom. It is smoothed vertically using a wallpaper brush or roller.

Sequence of gluing

In order for such wallpaper to be hung correctly, it is necessary to adhere to a clear sequence of actions.

Non-woven wallpaper is ready for gluing

First, you apply adhesive to the wall, then take the first strip of wallpaper and adjust its height. Using a method convenient for you, measure the verticality of the sticker. If the wallpaper does not match a little on top or bottom, then it’s okay, this happens when you glue wallpaper with your own hands. They can then simply be trimmed a little.
Next, the material is very carefully smoothed out so that no air remains under it. You need to try to get rid of all the bubbles that may form under the coating.
Then take a wide spatula and sharp knife. Using a spatula as a guide, it is necessary to cut off the excess wallpaper, and then glue it in those specific places where they are not glued well enough.

With quality work done, the joints of the canvases are not visible

While doing all this, do not forget that you cannot create excessive drafts or heat in the room. The room should be slightly ventilated, but not so much that it could negatively affect how the wallpaper adheres to the wall. Before gluing non-woven wallpaper, understand the temperature conditions.

A few tips on how to properly hang non-woven wallpaper so that the gluing is done at the highest possible level.

Using light wallpaper in a room

Do not forget to read the manufacturer's instructions for specific wallpaper before hanging non-woven wallpaper. Although non-woven solutions are quite similar, in some cases the gluing may be slightly different. For example, although it was previously written that it is enough to smear only the wall, some manufacturers recommend also smearing the wallpaper, as when you glue textile or vinyl options with your own hands.
Coat not only the surface of the wall where you directly glue the wallpaper, but also a little large area. This will allow the edges to adhere better to the wall surface.
Wallpaper with a deep texture should be pasted more carefully; it is best to press it using a wallpaper roller, which, moreover, should not be pressed too hard, otherwise the surface of the wallpaper can be deformed, then the roll will have to be changed.
When wallpapering, excess glue may remain on the wall. You shouldn’t leave it on; when it dries, it won’t become 100% transparent and will leave unpleasant stains. Take a damp sponge and then gently wipe the area where the glue was applied. Try not to unnecessarily touch the wallpaper or wet it. Although non-woven fabric does not wrinkle from slight moisture, it is still better to protect it from water.

Wallpaper work has just been completed

It’s not so difficult to figure out how to glue non-woven wallpaper. The main thing is to clearly understand whether this particular wallpaper is really optimal in your situation, and not, say, textile or paper. After all, if you make an incorrect decision, then it will be much more difficult to change something in the future.

Re-pasting wallpaper, cleaning the surface with your own hands and spending money again is something that would be good to avoid. So do it right choice immediately - and no problems will arise in the future; non-woven wallpaper is very resistant and durable, therefore it will delight you for an extremely long time.

The guide will save you from many common mistakes and will tell you how to properly glue non-woven wallpaper: about gluing corners, marking walls, cutting wallpaper and gluing technology.

Non-woven wallpaper can be with or without a pattern. The second type will require additional painting. Such wallpapers mask wall imperfections well and are the most simple material for finishing.

Preliminary preparation of the room before pasting

At the preliminary stage, it is important to correctly calculate the required number of rolls. To do this, you need to measure the width and height on each side of the room. When calculating the required number of rolls, it is important to add a few centimeters to the length of the required fabric.

Note! You should buy wallpaper from only one batch number. This number is usually indicated on the roll label. Only rolls from the same batch number will definitely have the same shade and pattern texture.

Before wallpapering, the walls need to be leveled; wallpaper wider than 50 cm is very sensitive to unevenness.

Preliminary preparation of the room before wallpapering consists of: This fact is especially important for wide wallpapers, which are extremely intolerant of unevenness, especially at the joints.

Sockets and switches must be removed and the wires insulated. Treat the walls with primer and be sure to dry them. Protect the remaining furniture in the room, the floor and unused areas of space with plastic film.

Preparing corners for pasting

In the corners the panels are glued overlapping, this way their unevenness is hidden

This process should be done at the stage of wall putty. In the corners you need to put special plastic corners, which will be attached to the walls with putty. After the structure has dried, you can begin gluing. When gluing a corner, the wall is treated with glue, including the corner. The panel is glued overlapping; experts do not recommend gluing the whole panel into a corner. Because the angles, as a rule, are far from ideal and the formation of defects is possible. The overlap on the next wall should be small.

Required tools and materials:

To roll the edge you will need a roller
polyethylene film
plastic spatula
for glue bucket and roller
soft bristle brush
pencil and tape measure
plumb line
building level
glue designed specifically for non-woven wallpaper

The process of pasting walls with your own hands

Stage No. 1. Wall marking

When working with non-woven wallpaper, marking is necessary, since the sticker goes end-to-end

It is recommended to start marking from scratch. Wallpaper on this basis has an excellent edge; the butt gluing method is used. Overlapping panels are glued in the corners. This is done in order to enable good further processing. If the width of the roll is 1.06 meters, then a meter must be set aside on both sides of the corner.

Initially, a vertical line is drawn with a pencil using a level or plumb line. From the drawn line, the tape measure marks 1.06 meters. This is how you need to outline all the walls that are being prepared for pasting.

Stage No. 2. Preparing the site and cutting wallpaper

Make sure that the pattern fits together; flaws will be very noticeable with large ornaments

After marking the walls, you need to spread clean plastic film on the floor. It will be needed as a place for rolling out rolls. This is done by placing the wallpaper face down. When cutting the panel, it is important to take into account the pattern on the wallpaper.

If there is no drawing, then use a tape measure to measure the place where the first piece will be glued. Another ten centimeters are added. The roll is folded over the rolled part so that the edges match. First, the bend is drawn by hand, and then it is cut with a knife. Prepare wallpaper for covering the entire room.

The prepared panels are rolled into loose rolls, face down. Non-woven wallpaper is tolerant of such manipulations.

Stage No. 3. Glue preparation

When diluting the glue, do not allow lumps to appear, as they negatively affect the quality of the sticker.

Wallpaper glue should be purchased specifically for non-woven wallpaper. It should be diluted according to the instructions indicated on the package. Typically, glue is diluted using this technology: water is poured into a bucket, glue is poured into it in a thin stream, and it is constantly stirred. There should be no lumps, otherwise they will interfere with quality pasting. For the glue to become usable, you need to let it sit for a while. It will be useful to insert a special plastic mesh into the bucket, which will help remove excess glue.

If you already had non-woven wallpaper,

Stage No. 4. Applying glue and wallpapering walls

Dip the roller in a bucket of glue, move it along the mesh, and then apply glue to the wall. Apply glue only to cover one panel. The panel should be glued on top. The canvas is taken by the edge and applied to the wall. Gradually lower the roll down, smoothing the wallpaper from the middle to the edges with a special brush or roller. You can also use a plastic spatula, but be careful not to damage the wallpaper.

Note! The wallpaper should be pressed tightly against the wall, there should be no bubbles or folds inside.

Wallpaper always starts from the top, moving downwards, from the middle to the edges of the panel.

When several sheets have already been pasted, each subsequent seam of wallpaper will need to be additionally rolled with a roller. The piece of wallpaper that remains below should be carefully cut off. It is recommended to do this after the wallpaper has dried. By the way, consider that the baseboard completely covers the area where the wallpaper was cut.

It is important! Many construction stores today sell wallpaper that is a meter wide, which is non-standard for us. But the meter width has its advantages, because it simplifies the pasting process.

Takes ~4 minutes to read

Save

Non-woven wallpaper at one time revolutionized the idea of renovation. They have a lot of advantages and are easier to stick. With certain knowledge, the entire process can be done with your own hands, achieving good result, you just need to understand the technology. In this article we will look at how to properly glue wallpaper and prepare walls for quality repairs.

The technology for gluing non-woven fabrics differs little from paper and vinyl types wallpaper The basis for gluing them is similar; it requires preparation, accuracy and patience. At the same time, you need to know the nuances of working with them.

Save

Required Tools

For high-quality gluing you will need a large amount auxiliary tools. You can do without them, but using them will make the gluing process easier and faster.

Required tools:

Roulette.
Pencil.
Roller or brush.
Knife or scissors.
Glue container.

Save

When purchasing tools, you should know that a roller is more convenient than a brush, and a utility knife is preferable to scissors. In the first case, the speed of applying the glue will be higher, and it will lay down in a more uniform layer. The knife will allow you to cut the canvas with straight cut without nicks.

Additional tools:

Ladder.
Long ruler.
Container with water.
Building level.
Metal spatula of small width.
A brush with soft bristles for smoothing wallpaper.
Tray and mesh for removing excess glue from the roller.
Foam sponge and/or cotton towel.
Rubber or plastic spatula with a soft tip.

You can do without these items, but they will speed up the gluing process and allow you to achieve higher quality work. At the same time, it is difficult to get a good result on unprepared walls.

Marking and preparing walls

Save

The structure of such wallpaper allows it to be used on walls that are not perfectly flat. At the same time, there should be no obvious bulges, pits or cracks on the surface. Their elimination is included in the first stage of preparation.

It is important not to forget that they cannot be glued to surfaces covered with oil paint. You need to first sand the walls a little with medium-caliber sandpaper.

Acrylic paints do not interfere with gluing non-woven wallpaper. This type of painting does not need to be sanded; if the walls were covered with other wallpaper, then they simply need to be removed. It is also necessary to clean the surface from dirt, cobwebs or dust accumulations.

It is worth remembering that gluing non-woven fabrics requires a relatively uniform surface color. They are slightly translucent, so if there was a contrasting color pattern on the walls, it will be noticeable. The final stage in preparation - applying a primer, although many do without this procedure. After this, it is recommended to switch to marking the walls using a level.

Save

You need to draw a vertical line at a distance of a meter from the corner. You can use a simple plumb line or a building level, and then draw a line. A distance of 1 meter is needed for a wide format of canvases; using narrower ones requires a different distance. You also need to take into account the future gluing process: the width includes a few cm for adjustment. If the wallpaper is end-to-end, then it is necessary to draw a vertical line taking into account these extra centimeters.

Save

After preparing the walls, it is recommended to cut strips for the entire room. This rule is only relevant for experienced people, but even they try not to cut all the rolls when gluing canvases with large patterns that require adjustment in height.

When gluing non-woven fabrics with your own hands, it is important to remember that the height of the room can be unstable throughout the room. Even if you choose a format that does not require adjustment, you should not cut everything to the same length. You must first measure the height of the walls in different parts rooms with a pitch of no more than 50 cm.

When slicing, canvases with large patterns deserve special attention. The larger the step, the higher the probability of error. For those who are gluing for the first time, it is recommended that if there is a large pattern, cut off each strip after placing the previous canvas on the wall. This will allow you to adjust the design without the risk of damaging the wallpaper.

The least problematic in terms of cutting are those with no clear pattern. After checking the height of the room, you can immediately cut them, marking their order with a pencil. If the height error is 1-2 cm and you plan to use a wide ceiling plinth, then length measurements are not required, this difference will subsequently close.

Save

Non-woven-based roll materials are a heavy type of adhesive wall coverings. Many who do their own repairs for the first time make a mistake when choosing glue. For these types of roll coverings, a special glue is required; it says on it that it is intended for non-woven types of wallpaper. He can be different manufacturers, but the purpose must be the above.

Gluing such canvases to paste will not work - they will begin to “slide” from the walls. The only exception is fiberboard: if you glue it to this material, then a mixture of PVA and paste is quite suitable.

You can properly dilute purchased glue according to the instructions. Granular glue from any manufacturer has instructions for dilution. Usually you need to pour the powder into a container of water in a thin stream, stirring the mixture vigorously. You should not dilute a large portion in advance - if left standing for a long time, the glue loses its adhesive characteristics, which can lead to the canvases coming away from the walls. Even the most good glue It is worth starting a new one if the work is not completed in one day. As a last resort, leftover mixture should be stored in the refrigerator and used as soon as possible.

How to stick it yourself? The procedure for pasting walls

Save

Often a person wants to glue wallpaper himself, after briefly watching a video of this process. Even with high-quality preparation, you can stick them on incorrectly. This is possible if you ignore or do not know the basics of the arrangement of paintings.

It is also always worth studying the information on the rolls themselves - sometimes they contain additional individual information about working with them. For example, it is possible to specify a duplicate application of glue on both the wallpaper and the wall. In most cases, it is necessary to apply it only to the surface to be pasted, leaving the canvas dry.

How to glue: technology

The whole process is divided into 3 stages:

Applying glue.
Sticking.
Removing wrinkles and bubbles.

Save

Before gluing, you need to study the label on the package. Unless otherwise indicated on it, the adhesive is applied only to the wall. This must be done with a small margin of bandwidth. The glue is applied separately for each piece of fabric.

After this, they begin to glue the wallpaper on top, trying not to touch the wall. bottom canvases. If you are doing a DIY repair for the first time, it is better to call an assistant. It will hold the bottom of the strip, preventing it from sticking to the wall ahead of time.

For a good result, you need to smooth the wallpaper when gluing it from top to bottom, trying to avoid folds and air bubbles. If bubbles remain, then you need to take a rubber spatula or a dry towel and, without strong pressure, direct them to the nearest edge of the canvas. You can also remove minor wrinkles by gently smoothing them out. Large creases require careful detachment of the strip from the wall and re-gluing. This must be done immediately.

A narrow metal spatula may be required to detach the canvas from the wall to remove folds or to coat the edge of the wallpaper with glue if there is insufficient or uneven amount of glue. If glue gets on the front side, it is recommended to immediately remove it with a damp sponge. Only after this can air bubbles be smoothed out. Then you can proceed to applying glue for the next piece of canvas and subsequent work.

Knowledge general technology Pasting this type of wallpaper does not always save you from mistakes. Often the work turns out to be of poor quality due to a poorly applied first strip. Mistakes are also possible when gluing the ceiling.

First stripe sticker

From correct location the first panel depends on the further result. Do not neglect the level or plumb line at least before gluing the first piece. It is recommended to start from the window or from the corner closest to it. Many people use the window as a vertical line, but this does not guarantee that deviations will not be visible in the future.

Save

The presence of a verified vertical of the first strip does not guarantee the preservation of evenness when gluing with an overlap. In such cases, it is necessary to regularly check the new vertical and mark it on the wall. Experts recommend doing this for each new strip, but with a good eye, you can pass the strips through one.

The basics of end-to-end wallpaper do not require such nuances for each piece. You need to check the vertical of the first strip and then just continue to place the subsequent ones evenly. But neither this option nor the subsequent one will allow you to avoid adjusting the pattern if it is clearly present.

Adjustment of canvases and photo wallpapers on this basis

Save

Ideally, any pattern needs to be adjusted, since this type of wallpaper has a relief, it also needs to be combined to achieve the maximum effect of uniform wall covering. This type does not require a significant increase in material consumption, while a large pattern may force you to buy an extra roll.

On modern wallpaper Manufacturers indicate the size of the fitting step for matching the pattern. The label indicates the number of centimeters placed between the repeating elements of the pattern. To align the pattern, you need to move the blade up or down to cut the next strip.

Photo wallpaper is considered a more complex type of pasting. It doesn’t matter what kind of base they have - paper or non-woven, the gluing process itself requires at least minimal experience. They require pattern alignment accuracy of literally up to 1 mm, which is difficult to do when working with roll coverings for walls. It is more correct and logical to wallpaper the room first simple wallpaper by giving yourself a workout. It is better to start gluing photo wallpapers already having a small amount of skills.

Ceiling pasting

If you decide to hang wallpaper on the ceiling with your own hands using rolled non-woven materials, then you need to remember about the correct joining and placement of the canvases. There are only two rules:

The joints are parallel to the sunlight.
The canvases are arranged without overlap.

Such requirements have a logical basis - the overlap is difficult to properly cut from the ceiling, and if it is not removed, it will be very noticeable. The same applies to the location of the canvases - wallpaper should not be pasted perpendicular to the window. Otherwise, pasting the ceiling differs little from the walls.

Save

Final works

After finishing work, it is important to ensure proper drying - the wallpaper should dry for 24 hours at closed windows and doors. Ignoring this requirement may lead to the appearance of bubbles, folds and other deformation of the canvas.

If you set yourself a goal, then it’s not difficult to find out how to hang such wallpaper with your own hands. Each person can do this themselves. You need to follow the recommendations and be careful in your work. Then the result will be worthy even without the involvement of highly paid specialists.

Video: proper gluing of non-woven wallpaper with your own hands

Non-woven wallpaper is in high demand among professionals and home craftsmen. But not everyone thinks about how to properly glue non-woven wallpaper when purchasing such canvases.

Non-woven coverings are made in a wide range of colors and textures for bold design ideas. It is allowed to completely cover the entire house or apartment. Canvases even in rooms with increased level humidity.

Convenience when working with any material - knowledge of the technique of its use. To do this, the publication presents:

Popular brands of non-woven wallpaper. Their characteristics and rules for pasting.
Brands of professional adhesive mixtures for correct work with such wall coverings.

Non-woven wallpaper: composition and properties of canvases

Non-woven wallpaper is a multi-layer non-woven wall covering. They are made from modified cellulose. One of the binding elements of the composition is polyester fibers.

Non-woven material differs from paper in its resistance to high temperatures. Wallpaper wears out slowly: it is much harder to tear than other types of wall coverings.

Visually, the canvases are similar to white or light yellow paper, and their structure is similar to fiberglass. They attract customers tactilely, because they feel like elastic fabric to the touch.

Non-woven fabrics are often combined with other materials: paper or vinyl. A coating with this composition is also considered non-woven. It is true that it would be more rational to define them as separate types.

The most common fabrics are smooth, non-woven based, without additives. Let's study their advantages, disadvantages and pasting methods.

Pros and cons of the material

There are many advantages to choosing non-woven wallpaper. The following ones deserve attention:

strength and, accordingly, increased service life;
increased resistance to moisture, which led to the appearance of washable non-woven fabrics;
resistance to odor absorption;
high density, due to which you can hide minor imperfections of the wall itself;
vapor tightness - you can paste over walls in almost any room;
environmental cleanliness;
resistance to high temperatures And high level fire safety;
elasticity - do not lose their original appearance even when the walls shrink;
resistance to direct ultraviolet rays;
easy removal when replacing wall coverings with new ones;
economical use of wallpaper glue.

At the same time, non-woven wallpaper also has its disadvantages:

High price, which will not suit everyone.
Transparency. Through light coatings, any speck on the wall surface will easily appear.
Preservation of adhesive residues that accidentally fall on outside canvases.

Where can I glue it?

When deciding to hang non-woven wallpaper yourself, a person without experience does not always know in which rooms this is permissible. Thanks to good technical specifications Such canvases can be used for almost any room.

Since they are moisture resistant, they can even be placed in the bathroom. Resistance to fading makes it possible to veneer rooms with them sunny side Houses. However, remember that this type of wall covering cannot be glued to dirty walls, as all marks will be visible.

Popular brands

There are so many non-woven wallpapers in building materials stores that an uninformed buyer can get confused and make a mistake when choosing. Therefore, let’s immediately outline the list popular brands wallpaper products:

Palette. Russian manufacturer, which conquered the country's market. Produces a wide range of non-woven wallpaper at low prices compared to European ones.
Erismann. A current Russian brand that attracts with a wide range of designs.
Fipar. Not the most famous brand that is just beginning to conquer the market. Attracts with original textures.
Rasch. German trademark, which guarantees the quality of its products.
Zambaiti Parati. Brand of non-woven coverings in classic style, whose goods are exported from Italy.

Methods for gluing non-woven wallpaper

This is a rather labor-intensive process. Many people don’t even try to work with it on their own, simply hiring craftsmen for this task.

However, everything is not as complicated as it seems. Introducing universal instructions on the correct sizing of walls with non-woven wallpaper.

Tools and materials

Before starting work, you will need to prepare the appropriate equipment. You will need:

canvases;
adhesive composition;
a level and a tape measure several meters long;
wide metal spatula;
knife and pencil;
fleecy (or foam) and rubber roller;
a cone-shaped roller for working out joints;
container with clean water.

Preparing non-woven fabrics

Before you start gluing non-woven wallpaper, you need to prepare the canvas itself. Pre-work out the design of the entire room, or better yet, the entire apartment. Wallpaper in different rooms must be in harmony with each other to create a single design composition.

Use a tape measure to measure the wall vertically to determine the required length of the panels. Cut the rolls themselves into sheets according to the patterns, which should match each other.

How to determine the quantity?

Before hanging non-woven wallpaper, measure the total area (S) of the room. In this case, take into account the height of the walls and their total width. Focus on the length and width of the wallpaper rolls.

Based on these values, set the amount of wall covering in full. We recommend purchasing one extra roll, which can be used as a spare.

Which wallpaper glue to choose?

Naturally, gluing walls with non-woven wallpaper should be done with specially developed adhesives. We recommend purchasing only proven formulations from well-known brands.

Here are some of those that, according to the masters, have proven themselves in their work:

“The Interlining Moment.” Cheap glue that copes with all non-woven coatings. The composition includes additives that prevent the occurrence of mold fungus. The disadvantage is the formation of lumps during dilution.
“Methylane Interlining Ultra Premium”. Composition from a German manufacturer. Can interact with walls made of different materials, easy to divorce. Positioned as a mid-price glue.
“Quelyd Special non-woven fabric”. The most expensive glue, but the cost of purchasing it is fully justified by the high quality of the product. Has the highest user rating.

Calculating glue consumption

Therefore, the master must first install S of the wall to be pasted, and then divide the result obtained by the consumption marked on the packaging. When rounding numbers, use the largest side as a guide.

Breeding method

There is nothing difficult about diluting glue. To do this, it is only important to follow the algorithm.

This is done like this:

fill a deep container with warm water (the volume of water is indicated on the glue box);
measure the required amount of adhesive powder;
Using a stick, quickly stir the water until a funnel forms;
pour glue into the formed hole in a thin stream;
stir the glue so that all the adhesive remains in the water;
after that you can use a mixer (drill) for better mixing;
let the composition brew and swell.

How to cover a wall with non-woven wallpaper?

24 hours before starting work, the room must be ventilated, and then all windows and doors must be tightly locked.
The walls for pasting are being measured.
Sheets are cut with a margin of 9-10 centimeters.
Next is wallpaper glue.
A place to start work is set. It's best to start from a corner. To do this, apply the first wallpaper sizing line to the wall with a pencil a few millimeters from one of the corners.
Use a roller to coat the wall with glue, going slightly beyond the borders of the wallpaper sheet.
The first strip of wallpaper is applied in accordance with the intended line.
The sheet is pressed tightly against the wall with a roller or spatula.
Remains of glue are carefully removed with a soft, dry cloth.
We glue the remaining sheets end to end.
The resulting air bubbles are removed by smoothing.

Complete drying time

The main mistake novice craftsmen make is ventilating the room immediately after gluing it. This leads to the fact that the canvas will begin to peel off at the joints and other problem areas.

Manufacturers of non-woven coatings note that they will dry completely only a day after work. But in practice, complete drying occurs no earlier than after 28 hours.

How to glue non-woven wallpaper to the ceiling?

Let's look at another popular question about how to glue non-woven wallpaper to the ceiling. In this matter, it is also important to make the correct calculation of the material, based on total area ceiling.

In general, pasting ceilings with non-woven wallpaper is not much different from applying canvases to walls. For detailed information about this pasting procedure, we recommend that you study the video instructions.

Let's sum it up

Now you know how to properly glue non-woven wallpaper onto walls and ceilings without the help of hired craftsmen. For clarity, we recommend watching several training video lessons on this topic:

Perhaps you know other methods of working with non-woven wall coverings? Share your practical knowledge in the comments to help others choose the best method for themselves.

Tsugunov Anton Valerievich

Reading time: 5 minutes

Non-woven wallpaper is becoming more and more popular and is gradually replacing its paper counterparts. This is due to the presence of a number positive properties: resistance to deformation, durability, the ability to hide minor defects in the base, the possibility of subsequent painting. How home handyman, and a professional finisher needs to know how to properly glue non-woven wallpaper.

Features of gluing non-woven wallpaper

At the heart of this finishing material interlining is used - a non-woven fabric made of cellulose fibers.

Before starting work, you need to get acquainted with several important features these wallpapers:

the canvas does not stretch and retains its original size;
the width of the rolls is often 700–1400 mm, so finishing a room will require fewer strips than when using wallpaper of a standard half-meter width;
non-woven fabrics are glued end-to-end, without overlaps. An exception is gluing the corners (but more often craftsmen make the joint with a double cut);
The glue is spread only on the walls or ceiling; the canvases themselves are applied dry.

Gluing non-woven wallpaper with your own hands is easier than paper-based wallpaper.

Tools and materials for work

TO necessary equipment and materials include:

roller for applying glue (preferably with long pile);
brush or brush for treating corners and hard-to-reach places;
a bucket for diluting glue;
tape measure 5–8 meters;
laser level or plumb line (the simplest device can be made independently);
plastic spatula for smoothing strips;
sponge for removing excess glue;
dry rag;
pencil.

Special attention attention should be paid to preparing the glue: it should be intended specifically for non-woven wallpaper. The universal composition recommended by some consultants in stores usually has much less adhesion to non-woven fabric. If it is used in the future, the canvas may begin to come off.

Preparing the walls

For high-quality wallpapering, the walls must be prepared. Main stages:

Removing old canvases or paint. It’s written about how to remove old finishes with minimal effort. All methods for removing paint are outlined in. If layer paint coating is very durable, the surface should be treated sandpaper medium grit.
Plastering is carried out in case of significant unevenness.
Priming with a deep penetration compound.
Leveling surfaces with putty.
Re-priming. Craftsmen recommend applying a thin layer of wallpaper glue to the walls instead of the usual primer.

All stages of preparing walls for wallpapering are described in more detail in. The rules for preparing drywall will be different; step-by-step instructions for drywall can be found.

Before gluing the fabrics onto non-woven fabrics, the surfaces must be completely dry.

Marking

Work begins from any corner of the room. It is allowed to glue the first sheet with an indentation, for example, if the calculation of the number of blanks with a pattern along the entire perimeter of the room showed that it is better to make the finishing joint not in the corner, and the corners themselves are quite even. In any case, you need to glue the first workpiece as evenly as possible: all subsequent work depends on this.

A distance equal to the width of the wallpaper minus 2 cm is removed from the corner.
By using laser level or a plumb line, a vertical line is drawn on the wall with a pencil.
If the wallpaper is light, then do not draw a solid line, but make marks at the top, bottom and in the middle.

They go through the entire room in the same way. Even if there are overlaps somewhere in the corners, these lines will help guide you in the correct gluing, especially if canvases with a pattern are chosen.

Cutting material

The process looks like this:

A roll of non-woven wallpaper is rolled out and the height of one sheet is measured.

Using a ruler, draw a cutting line with a pencil. The canvas is folded along it, placing a roll on top, and carefully smoothing it out.
Next, use a knife or scissors to cut off the first piece.

Measure the height of the room at different points and, taking into account a small margin, cut the required number of sheets.

If non-woven wallpaper has a pattern that requires joining, you need to find out the size of the repeat - the height of the repeating image. The length of the cut strip must be a multiple of this number, but must be greater than the height of the room.

The required height margin will allow you to move each sheet for precise selection drawing. To simplify the work, you can periodically place two sheets of paper together to check the image matches.
Wallpaper is always cut sequentially on one side of the roll.

At this stage, the main thing is not to make a mistake in the sizes, so that you don’t have to glue the missing pieces.

Technology for gluing non-woven wallpaper on walls

Step-by-step gluing instructions:

The diluted glue is applied with a roller to the surface between the two lines. You need to capture a width slightly larger than the size of the wallpaper. This will help the joints stick well.
Use a brush to coat the top, bottom edge and corner, since there is always less glue here.
The finished sheet of non-woven wallpaper is held by the upper corners, carefully applied to the wall and, starting from the top, smoothed with a plastic spatula, but strong pressure is not necessary. Particular attention is paid to exact compliance with previously made vertical marks on the wall.

If the wallpaper has a deep texture, it is better to use a wallpaper roller to avoid damaging it.

Remaining air and excess glue are removed with a spatula from the middle to the sides.
Exposed glue should be immediately removed with a damp sponge or rag, and then wipe these areas with a dry cloth.
The second sheet is glued butt to the first.

Do not be afraid that gaps will appear at the joints: non-woven wallpaper does not change its size after drying.

Glue the remaining sheets in the same way.

It is necessary to ensure that the glue on the wall does not dry out, especially in the places where the edges of the blanks are glued, otherwise the canvas may come off.

For this reason, it is advisable to work quickly with non-woven wallpaper. When it is clear that little glue has been applied, it is better to immediately coat this area by bending the sheet.

Trimming the tails

It is more convenient to trim the wallpaper when it is already dry. The technique for even pruning is as follows:

a wide metal spatula is held almost vertically and pressed against the top or bottom of the wall;
the knife is held strictly parallel to the spatula, without tearing it off; only the spatula moves.

Nuances of pasting corners

If the wall joints in the room are perfectly straight, you can glue non-woven wallpaper onto the adjacent surface. But this rarely happens. More often, the double cut technique is used in corners:

The sheet is glued with an overlap (2–5 cm is enough).
A metal spatula is applied to the junction of the workpieces.
Use a utility knife to cut through both sheets.
After this, the cut off top strip is removed. The joint will be smooth and almost invisible.

It is important to not press too hard with the knife so as not to cut the putty on the wall, which may crumble, but not too lightly, otherwise only the top sheet will be cut through.