How to line a ceiling with plastic panels. We cover the ceiling with PVC panels - how to do everything right? You also need to pay attention to

Previously, it was difficult to imagine that anything other than whitewash or water-based emulsion could be used as a ceiling finish. As a last resort, those who were especially daring could wallpaper the ceiling surface. Fortunately, at present the situation has changed dramatically, and a huge variety has appeared on the construction market. Now you can choose between tension, suspended, mineral, glass, mirror or plasterboard surfaces. Finishing ceilings with plastic is one of the most common and affordable types of finishing.

Plastic ceiling finishing: main characteristics

Polyvinyl chloride is used as the material for the manufacture of such panels, since it differs high level security. In addition to the already noted production of plastic panels, material such as PVC is also used for the manufacture of certain types of dishes. Which adds another convincing argument in favor of such a design. First you need to figure out how to attach plastic panels to the ceiling.

It is also necessary to clearly distinguish between plastic panels for the ceiling and slabs for the walls. Ceiling panels are significantly lighter, which affects mechanical strength, but allows you to safely attach to the upper parts of the room. So, if you attach wall panels to the ceiling, there is a risk that the adhesive mixtures will not provide good adhesion, and sooner or later such a panel will fall off. And if the ceiling panel is used on walls, then the risk of deformation of the surfaces from the slightest touch increases.

At the same time, covering the ceiling with plastic has certain features. Thus, the appearance is largely influenced by the type of panels used during installation. Glossy panels can significantly hide joints and seams, as the surface reflects light, which gives the entire structure even more originality. You can also purchase matte or patterned panels, but in this case there is a high risk of emphasizing the joints or seams.

Mounting plastic to the ceiling: advantages

Plastic panels have a number of advantages, which explains their great popularity in the construction markets.

The main advantages include:

Material selection

Before you start work, you should decide on the amount of material needed. This can be easily done if the area of the surface to be pasted is known. If the room has a non-standard complex configuration, you should first calculate the number of required rectangular sections and round the resulting number.

When using a standard rectangular design, everything is much simpler. The packaging usually indicates the dimensions or area of one panel. Taking into account the number of pieces in one pack, we determine the required amount of material. It is also worth considering spare parts in case of cutting or adjusting to the dimensions of the surface, as well as in the event of a defect or defect.

As for the color and type of surface, it all depends on the design or the author’s idea. You can purchase the cheapest white panels and then paint them in the desired color, but embossed ones will cost an order of magnitude more. It is advisable that all details relate to one color scheme or clearly corresponded to the picture. WITH special attention It is worth handling those panels that differ from others with the naked eye, as they must be replaced immediately.

When purchasing the plastic panels themselves, you should carefully inspect each part for defects or irregularities. In addition, during transportation or delivery, the material should be moved very carefully, since the slightest damage will reduce the chance of creating a perfectly flat and smooth surface.

Selecting a profile and tools

The main types of profiles that are used to create a frame are the following:

Starters. Such profiles are used to cover the ends of the tiles and are attached along the entire perimeter of the ceiling surface.
H-profiles. Another variant of the name is connecting. They are used to increase the length of plastic plates.
F-profiles. Like the starting ones, they are intended for closing the ends, but are only used in external corners or changes in planes. Thus, one wall is paneled, but the corner wall on the other side is not.
Ceiling plinths. A more refined version of the starting profile.
Plastic corners– external and internal. They are used to close joints that form in all corners of the surface.
Universal corners. This type can be used in any corner joints, but this does not guarantee a presentable appearance.

In order to determine a clear quantity necessary materials, you should also create a drawing or diagram of the ceiling surface. A small copy of the ceiling is drawn on a regular piece of paper. Each profile should be attached at a distance of 60 cm to the other. Considering this fact, you can count the number of beams for the profile, as well as the number of plinths. In addition, such a diagram marks the mounting points for lighting systems.

Another significant point is the number of profiles for the entire perimeter, as well as the screws and dowels that serve to secure the profile structure. It is also necessary to take into account a certain number of spare parts, well, in case additional ones are required. An alternative option for profiles could be wooden beam, it is attached using staples. This choice can facilitate the installation process and save a sufficient amount of money.

In order to determine the required number of plastic panels themselves, you should divide the perimeter of the ceiling surface by the standard length of one panel (3 meters).

As necessary tools The following can be noted:

ruler;
roulette;
level;
hacksaw for metal;
drill;
ladder.

How to attach plastic to the ceiling: preliminary work

This type of finishing such as plastic panels does not require particularly heavy preparatory work. If possible, it is worth sanding the surface with sandpaper to remove excess unevenness. And if the ceiling is installed in a bathroom or any other room with a high level of humidity, the surface should be treated special composition preventing the spread of fungus.

On preparatory stage are also determined with height. As a rule, such structures in any case eat up several centimeters of space. Also, when additionally mounting lighting systems, it is also worthwhile to outline their location. The standard depth for installing lamps varies between 5-10 cm.

How to make a plastic ceiling: installing a box

When applying markings, it is very important to carefully approach the definition of contours. Since long lines attract attention first of all, you should take measurements of everything and more than once. All angles are measured, and the lowest is taken as the basis. Next, retreating 5 cm, mark a horizontal line; this can be done using a water level. Marks should be left in all corners and protrusions. Then, using a painting cord, all the points are connected and lines are drawn.

On a certain strip, holes for dowels are drilled using a hammer drill or drill, and these holes are also duplicated through adjacent profiles. Dowels are inserted into the holes made, and the profiles are attached to them to the wall. Since the standard length of each panel is 3 meters, they can be connected to each other to achieve optimal size, to do this, one profile is inserted into another, and the joint is carefully secured using bugs.

Next, hangers are attached to the profile to hold the panels. They are attached in a straight line, which are determined using a painting cord. The attached hangers are then tucked in, and all seams are filled with silicone.

How to sheathe a ceiling with plastic, see details in the video:

How to assemble a plastic ceiling: installation

It is also worth noting that plastic ceilings can be laid not only perpendicular to the room, you can also mount the panels diagonally, which allows you to best combine colors to create a unique pattern. You can also use a special corner to hide panel joints. And also to realize the author’s one-of-a-kind idea, you can create a two-level plastic ceiling.

So, the installation of the first panel begins from the wall opposite the entrance, as this will mask the unevenness at the final joints. Using a hacksaw for metal, the panels are adjusted to fit right size. The first panel should be 3-5 mm shorter than the width of the room. The edges are cleaned by sanding or creating an abrasive mesh. It is also worth remembering that many panels are wrapped in film when sold, so before installation you should get rid of the unnecessary layer.

The final stage is the installation of lighting systems. Using a pencil, we mark the place where the lamp is attached, and then a hole is made with an ordinary stationery knife. The lamp is inserted into the hole and connected to a wire, which is then placed under the ceiling. To add even more shine to the entire structure, you can also cover the entire perimeter with a frieze. This type of finishing is one of the most accessible and inexpensive and, at the same time, provides the ceiling surface with durability and practicality.

In this article we will talk about the feasibility and method of finishing ceilings with PVC panels with your own hands. The ceiling decoration itself plastic panels It is advantageous in that the time spent on installation is very small, and such work does not represent any particular complexity. However, you can see this for yourself, not only by reading the article, but also by watching the video clip attached to this page.

Installation of ceilings from PVC panels

Conclusion

If all of the above was not enough for you, we offer you to watch a video clip:

Plastic panels come in matte, semi-gloss and glossy. For finishing ceilings, as a rule, semi-gloss and glossy panels are used, the width of which is 20-25 cm. When using such panels outdoors, preference is usually given to semi-gloss ones, since they do not react as painfully to temperature changes and are more viscous in their structure.

It’s quite easy to decorate the ceiling with plastic panels yourself. This is not only savings, but also no need to hire workers. Finishing material is durable and lightweight, and also has a long service life. Modern version resistant to high temperature, non-flammable and has no unpleasant odor.

There is no need to level the ceiling surface before starting work. Currently, the market offers colored versions of panels or with a surface imitating natural materials.

Calculation of material quantity

To determine the amount of material consumed, you should first calculate the area of the ceiling space, then divide it by the area of the panel. Approximately 15% is added for stock and trimming. The resulting amount should be rounded up, so you don’t have to purchase additional material.

To understand how many hangers and profiles to purchase, it is recommended to draw a design plan indicating the distance from one element to another. This o will help you do the calculations.

Next, stripes are drawn on each wall; profiles will be attached to these marks to ensure the stability of the structure. Depending on how many profiles are required, you can determine the number of screws. To save money, a metal profile is sometimes replaced with a wooden one.

Preparing for work

Because for finishing the ceiling PVC panels there is no need to prepare the surface with your own hands, the following actions such:

Types of frame

Using a frame is the most common method of installing PVC panels yourself. The base for creating a ceiling covering must be reliable. This requires marking and installation of a frame for the structure.

The building level will help determine the lowest point of the surface collapse. Based on this, lines are drawn on all four walls. These marks are necessary to correctly install the frame.

Hanging view

Correct assembly hanging frame provides a quality finish. To do this you need:

In places where it is planned to install lighting devices, it is necessary to strengthen the fastening of the structure. Sometimes cuts are made in the profile for this purpose.

On a surface

Installation of the frame when finishing the ceiling surface is carried out as follows:

Ceiling trim is sometimes done to hide electric wires or install lighting fixtures.

Plastic covering, installed on metal carcass , has a long service life. Easy to install economical option as wooden slats, but it serves much less.

Installation of panels

Covering the ceiling with plastic panels works like this:

Glue mounting

If the ceiling surface is flat, you can do without assembling the frame. In this case, installation occurs using liquid nails or tile adhesive.

First of all you will need ceiling cleaning and priming. Then you need to treat the back side of the first panel with an adhesive solution and glue it to the corner of the ceiling space. The remaining panels will be attached to each other using groove connections. The last panel needs to be cut. All that remains is to attach the ceiling plinth.

To install a ceiling with plastic panels, it is not necessary to have special education. The main thing is to follow the instructions and follow safety rules.

Dramatic changes in the interior of any room require reconstruction of the ceiling. It can be sheathed with either plastic or other materials. One of the most successful and popular solutions in this case are plastic panels, with which you can sheathe the ceiling surface. Today's choice various options unusually wide, you can find good decision for any stylistic direction. Another question becomes relevant - how to cover the ceiling with plastic panels? Is it necessary to seek the services of professionals or can you do it yourself? Of course, you can do everything with your own hands, which is what we will talk about today.

Characteristics of PVC ceiling panels

Such panels usually consist of two plates spaced apart by some distance using stiffening ribs. Connecting elements are located on the side, thanks to which the installation of the panels is facilitated, and they themselves are securely and firmly held in the installed position.

PVC sheathing sheets may have different sizes: length varies from 24 to 60 meters, width from 10 to 50 centimeters, and thickness from 5 to 12 millimeters. The panels have different coatings, they vary appearance and color, may have a pattern or be without it.

The panels are made from environmentally friendly material that does not pose any danger to human health. This type of cladding is easy to care for and can be carried out without fear. wet cleaning. The service life is at least 10 years, installation is simple and does not require any special experience in related work. The cost is quite reasonable, in addition, PVC sheathing It is distinguished by the ability to easily carry out repairs if necessary.

Criteria for choosing plastic ceiling panels

The variety of PVC panels can make the choice difficult, or even make it completely wrong. That is why below are several criteria, guided by which it will be easier to solve the problem. The first thing you should pay attention to is the size. The usual indicators of length, width and thickness must be chosen so that there is as little waste during installation as possible. The issue of price deserves special mention. There is no point in chasing cheapness; the low cost of the panels means their corresponding quality.

Regarding the last aspect, which is of primary importance, it should be said that it is very simple to determine which product is of high quality and will last a long time and which is not. To do this, you need to pay attention to the following points:

appearance - panels must have the correct geometric shape, smooth surface and sufficient thickness, at least one and a half millimeters;
tactile sensations - the product must be homogeneous, there should be no distortion when feeling;
strength - stiffeners should not bend under mechanical influence;
joining of panels - the tenons and grooves must completely coincide, the slightest deviations are unacceptable;
resistance to bending - when bending the corner of the mounting strip, no traces of such impact should remain on the surface of the panel.

Calculation of the required amount of materials

Correct calculation of the materials required for filing will allow you to optimize costs during the repair process. First you need to calculate the area of the ceiling and one panel, then divide the first indicator by the second. The result will be the number of panels needed for installation. It is worth considering that it is necessary to make a small reserve, within 15-20 percent, so that later you do not encounter the problem of a shortage of material. To find out how much is needed ceiling cornice and fittings starting profile, two lengths and two widths of the ceiling surface are summed up, after which the same 15-20 percent is also added.

On a note: To successfully cover a ceiling with plastic, you need a frame; it is usually made from a wooden beam or a metal profile.

To clarify this aspect, a calculation similar to the starting profile is performed, after which ceiling surface is divided into equal small sections of about 50 centimeters so that you can determine the passing lines onto which the guide battens are attached. Thanks to this, you can find out how much timber or profile is required; its length will be equal to the length of the room or its width if a different spatial orientation is chosen for the mounted structure.

Tools needed for ceiling sheathing

The list of tools needed during the installation process consists of the following items:

impact drill (hammer);
construction stapler;
level;
screwdriver;
hammer;
scissors;
roulette;
measuring line;
goggles and gloves to protect hands and eyes.

Ceiling covering, preparatory work

To properly hem the ceiling, you must first prepare appropriately for installation. To do this, the following steps must be performed sequentially:

Surface cleaning and antiseptic treatment.
Removing the wiring into corrugated pipes and securing them to the ceiling.
Finding out which corner of the room is the lowest in height.
Horizontal marking of the starting strip with an indentation of 40-50 millimeters for lamps.
Installation of the starting bar.
Installation of the guide beam in increments of about 50 centimeters.

Completing these simple operations gives every reason to believe that the process of creating the sheathing has been successfully completed.

Installation of plastic panels

The installation procedure does not depend on what the frame will be, metal or wood. The only thing that needs to be noted is that it is easier to screw self-tapping screws into a wooden beam than into a metal profile; on the other hand, the latter is significantly lighter in weight, so the choice is yours.

The sequence of operations performed during the upholstery of the ceiling with PVC panels is approximately as follows:

screwing a U-shaped strip around the perimeter of the ceiling;
installation of a plinth in the strip, which creates gaps for installing panels;
installation of the first panel in the profile or in the gap;
aligning the installed element and screwing it to the profile with self-tapping screws;
installation of the following panels, the tenons of which, falling into the grooves, hide the screw heads.

On those elements where lighting fixtures will later be inserted, corresponding holes are made ahead of time with the passage of the power cable. There is nothing difficult about upholstering a ceiling, although the installation last panel may have problems. This is due to the need to get it into the groove of the previous one and at the same time into the gap of the profile or baseboard. It is extremely difficult to calculate everything accurately, so the situation is often solved this way: the panel is fastened to the wall with self-tapping screws, and then they are covered with a plinth.

Caring for plastic panels

Despite the importance of installation work, it should be noted that lining the ceiling with plastic only means half the battle; the panels require appropriate care. A huge advantage of polyvinyl chloride products is their resistance to various types of influences. So, since these panels are resistant to chemical substances, during their maintenance they can be washed with ordinary washing liquids. Due to the special antistatic coating, dust does not accumulate on them, so it is enough to carry out this procedure only a few times a year.

Naturally, there are still certain reservations, for example, resistance to mechanical stress leaves much to be desired, so brushes and scrapers made of metal would be a bad maintenance idea. Perfect option- using a soft sponge that can easily remove dirt from the panels without causing physical harm to them.

Video on the topic

Today there are many options for finishing the ceiling. This base can be sheathed with both expensive and available materials. For example, these could be plastic panels, available in a wide range. Such coverings look attractive and are easy to install. Today we will talk about the intricacies of finishing the ceiling with such materials.

Peculiarities

Today, many owners choose PVC panels for ceiling finishing. The popularity of these finishing materials is explained by their affordable cost, quite simple installation and durability.

IN retail outlets You will be able to find plastic facing panels made in any style. These can be not only laconic monochromatic options, but also non-trivial canvases with various images or patterns. With the help of such finishing materials you can give the interior a more interesting and expressive look.

The installation of plastic panels is easy to handle. To do this, it is not at all necessary to call a team of craftsmen, whose services can cost a tidy sum. You will be quite able to cope with such finishing work yourself.

PVC panels can be mounted in different rooms. This can be not only the living room or hallway, but also the bathroom or kitchen. High-quality coatings are not afraid higher level humidity - they are not subject to deformation in such conditions and do not lose their original appearance.

Advantages and disadvantages

If you want to decorate the ceiling with plastic panels, then you should familiarize yourself with their advantages and disadvantages.

First, let's look at what advantages these products can boast of. facing materials:

Polyvinyl chloride panels are durable materials. Their service life can reach 20 years or more.
Such materials do not rot.
They do not require complex and constant care. You will only need to wipe off any accumulated dust from time to time.
Plastic panels are perfect for ceiling decoration, as they have soundproofing characteristics.

By installing them on the ceiling, you will protect yourself from unnecessary noise coming from above.

Plastic panels are lightweight, so they are easy to work with.
Plastic ceiling panels are not afraid of temperature changes. Under such conditions they do not deform. Of course, this property applies exclusively to high-quality materials.
Plastic panels are often used to visually divide living space into functional zones.
Plastic panels can be classified as universal materials. They can be installed both in city apartments and in private houses.

It is impossible not to note the rich assortment of these facing materials. Thanks to large selection suitable coverings can be selected for an ensemble made in any key.
Plastic panels can hide imperfections and differences in ceilings.
Under these facing coatings it will be possible to reliably “hide” electrical wiring and other similar elements.
PVC coatings have an affordable price. Suitable option You can choose one for any wallet.

Plastic panels are not ideal materials. Despite their popularity, such products also have their weaknesses:

Today, stores sell a lot of materials made from low-quality plastic, which contains toxic substances. These coatings are harmful to health. They are not recommended to be installed in residential premises.
After installing plastic ceiling coverings, an unpleasant chemical odor may remain in the room. But it is worth noting that not all buyers noticed this defect.
Plastic is not a breathable material. Due to its presence, air cannot circulate freely, penetrating the ceiling.
Most plastic sheets contain voids, which often harbor insects, and getting rid of them is a big problem.

Plastic ceiling panels are not impact-resistant materials. They are susceptible to mechanical damage, so when working with them, you should not apply too much pressure or press on the surface.
The lion's share of PVC panels “does not like” Sun rays. Under their influence, these facing materials may lose their color saturation.
Plastic is a flammable raw material. When ignited, it emits acrid smoke.

Kinds

There are several types of plastic panels needed for finishing ceilings. Let's get to know them better.

Seamless

These types of plastic ceiling sheets are considered more aesthetic and attractive. After installation work, they form a neat and continuous canvas on the ceiling, in which all the parts are joined as tightly as possible. Joints and cracks are not visible on these coatings.

Rack and pinion

Such options plastic trim are more common. They are cheaper than seamless specimens. It is worth considering what positive qualities have plastic slats:

This kind of cladding is not scary high humidity, therefore it is allowed to be installed in the bathroom, kitchen and even in the bathhouse.
Slat slats will not interfere with high-quality ventilation of the ceiling, since they contain gaps of different sizes located between the slats.
Such elements can be installed both along and across the existing premises.
Slatted canvases are inexpensive.
Installation of such coatings is quick and easy.
Slat slats boast durability.

Sectional

Sectional plastic panels for finishing the ceiling are also quite common. These differ in their structure. These panels can be two- or three-section.

On the surface of the sectional lamellas, each individual section is highlighted with a thin strip. As a rule, this element has a golden or silver color. Often, such ceiling coverings are confused with aluminum slats installed tightly to each other. This is explained by the external similarity of these materials.

With 3D effect

If you want to purchase more interesting ceiling coverings, then you should take a closer look at polyvinyl chloride panels with a 3D effect. These coatings have a relief surface. It may contain both small and large parts with convex shapes.

Such coatings look impressive not only on simple single-level ceilings, but also on beautiful multi-level structures with a plasterboard box.

Mirror

If you want to create a beautiful and rich interior design without resorting to expensive finishing materials, then you should purchase spectacular mirror panels. By decorating the ceiling with similar coverings, you can visually expand the living space and make it lighter.

Mirror panels are produced not only in standard rectangular ones, but also in square and diamond-shaped ones. On the surface, such materials have a special film with a reflective effect.

Plastic panels with a mirror surface can be found not only in home interiors, but also in cafes, shopping centers and other public institutions. They are inexpensive and look presentable, which makes them incredibly popular.

Imitating natural materials

Separately, it is worth highlighting plastic panels that imitate various materials of natural origin. For example, it could be an imitation of wood or stone covering. Such options look attractive and natural.

Of course, you should choose such panels especially carefully - low-quality coatings with a poorly applied image will look inharmonious and cheap.

Design

Plastic panels can be installed in many rooms. Correctly selected coverings will look harmonious in the hallway, living room, and bathroom.

It is worth noting that for areas where you receive guests, it is not recommended to purchase simple slatted canvases, classic for plastic white. These finishing materials will significantly reduce the cost of the interior. In such conditions, more attractive and fashionable coatings, for example, mirror or wood-effect, will look harmonious.

Currently, plastic ceiling panels are available in a variety of colors. Please note that for small rooms it is not recommended to purchase materials that are too dark - they can make the space even smaller. In such settings, light-colored canvases will look much better - they will visually expand the space, making it lighter and more comfortable.

If you want to purchase ceiling panels with patterns or colorful images, then you should be careful. Too colorful and intrusive paintings can overload the space, making it uncomfortable. It will be uncomfortable to be in a room with such a “pressing” ceiling.

If the ceiling in the room is bright and colorful, then the rest of the ceilings should have a more neutral color. This rule must be observed so that the overall interior does not seem tacky and ridiculous.

In bathrooms, panels of neutral colors are most often installed. These can be snow-white, beige, soft green or soft blue coatings.

In the kitchen, PVC sheets also look beautiful and harmonious. In this case, suitable slats should be selected based on the shade of the set, as well as the finish of the walls and floor. The texture of the panels can be either matte or glossy.

It is not recommended to install ceiling panels in both children's and adult bedrooms. In such conditions, there must be good ventilation, which cannot be achieved with “non-breathable” plastic sheets.

It is also not recommended to install plastic panels in interiors designed in rich and elaborate styles. These include such styles as Rococo, Empire, Art Deco, Neoclassical and Baroque. In such ensembles it is customary to use only expensive materials of natural origin. Ordinary plastic will stand out noticeably from similar interiors, demonstrating its cheapness.

Lamps

For ceilings finished with plastic panels, many suitable lamps are sold. Most often, such coatings are complemented by built-in and overhead lighting fixtures, which can be found in any store specializing in the sale of such products.

The most popular and in demand are recessed lamps. Typically they have small sizes and are easy to install.

Also in plastic ceiling lamps There may be different light bulbs present. For example:

halogen;
LED (the most economical and durable);
energy saving.

Latest options light bulbs are chosen less frequently than others, as they are increasingly being replaced by modern LED bulbs. Of course, a ceiling trimmed with plastic panels can be complemented with a classic pendant chandelier. However, in this case it is necessary to strengthen the frame structure on which the plastic will be supported.

Installation

To install plastic ceiling panels you do not need to have extensive experience and special knowledge. It is quite possible to do all the work yourself. The main thing is to stick to simple step by step instructions, and the result will not disappoint you.

Preparation

Before going directly to installation work, it is necessary to carefully prepare the ceiling. From such a base nothing should fall off or crumble. If such defects do occur, they should be eliminated. After this, it is recommended to treat the ceiling surface with a primer mixture.

After this, you should proceed to marking the future frame around the perimeter of the ceiling. On the walls in the room you need to draw a line using a marker or pencil. It will act as a guide when filing hanging parts. This distance must be calculated for hidden wiring lighting fixtures. Then the lowest point is selected on the base, after which a line is drawn along the floors using a long level.

After this, using a level, all lines are transferred to other walls. Experts recommend using accurate laser level. Then you need to start marking the supporting structures of the future frame foundation.

It is important to consider here that the installation of these elements should occur perpendicular to the PVC lamellas themselves.

Frame

Often the frame is a necessary structure for installing PVC panels. There are several options for sheathing:

Made of plastic. To prepare a U-shaped profile or plinth, it is possible to use high quality plastic. When you mark the lower limit on the walls, plastic frame need to be attached along this line.
Made from wooden blocks. Often, wooden beams are used to make a reliable and durable frame. Using dowels and screws, the block is attached directly to the ceiling (every 60 cm). To ensure that all elements are aligned to the same level, it is worth attaching wooden overlays between the block itself and the base.
Made of metal. Metal sheathing is the most common, durable and reliable. To prepare it, U-shaped profiles are used, which are attached with anchors to the ceiling base in increments of 60-80 cm.

When you have decided which frame you are going to install for covering the ceiling with plastic, you should proceed directly to its installation. Stages of work:

First you need to mark on the walls where the profiles will be attached. To line suspended structure was horizontal, you must use a level.
Next, you need to install a profile along the perimeter of the ceiling so that there are no gaps between it and the wall.
After this, you can proceed to attaching the transverse profiles.
Next we take the L-rail. It needs to be secured around the perimeter of the room.
If you plan to add lighting fixtures to the cladding, then you need to take care of the wiring in advance.

Installation

Once you have prepared the sheathing, you can proceed to laying the plastic panels. Let's take a closer look at how to assemble PVC sheets on a finished frame step by step.

The first plastic panel must be inserted in the corner to the transverse U-shaped slats. All subsequent parts should be inserted into the groove of the previous ones. These elements must be fixed using self-tapping screws.

Experienced craftsmen It is recommended to cut the starting panel with a hacksaw or special knife. Using these tools, you need to trim the latch of the part along the edge. There is no need to be afraid of anything - plastic lamellas are cut quite easily. To ensure that all panels fit tightly together, they must be carefully hammered during installation. Do not apply too much force, otherwise the plastic may crack or break.

When all the plastic panels are laid out, you should pay attention to how the last part is installed correctly. At this stage you should be especially careful and careful, since you yourself will have to adjust the width of the panel. Do this carefully so as not to damage the plastic. Next, the lamella will need to be inserted into the plank located on the opposite wall.

Some people turn the panels over with the lock facing the opposite side, and then trim it around the groove.

The last element must be fixed to the base with screws. All fasteners must be as reliable as possible. Then all the parts will hold tightly to the frame and will not begin to move away from it over time.

Then you need to glue the ceiling plinth. With its help it will be possible to close the edges and gaps of the ceiling sheathing. Such elements should be glued using ordinary liquid nails. The adhesive must be applied to the baseboard itself, then applied to the ceiling, pressed and held for a while.

As a rule, when you press, excess glue appears along the edges of the plinth - they must be removed with a rag and done as soon as possible.

There are also types of ceiling plinths that you need to assemble yourself. Such parts are assembled by snapping opposite side. Any cracks that appear must be sealed with sealant.

On glue

Plastic ceiling panels can be mounted using glue (without installing a frame). This method of finishing the ceiling is the simplest and most affordable. In addition, during such work the ceiling height is not “taken away”.

However, installing PVC panels without glue has its weaknesses:

Immediately before installing the panels, you will need to properly prepare the base. You will need to remove any previous coatings and finishing materials from its surface.
This method is not suitable for ceilings with significant unevenness and differences. On such a basis, the panels will not be able to be properly joined. Over time, they may simply fall off.
If you lay plastic panels on glue, you will not be able to hide communication systems under them.

Let's look at step by step how to cover a ceiling with plastic panels using glue:

cut the starter panel to length;
after this, several thin strips of liquid nails should be applied to the back of the part;
after this, the panel should be pressed against the ceiling base and immediately torn off;
after 3-5 minutes it needs to be pressed again to the installation site, but this time definitively;
As for the finishing panel, it can be hemmed to the rest of the parts only after trimming; this must be done not only in length, but also in width;
At the end of all finishing works regular ceiling skirting boards or beautiful baguettes. These elements can be installed using liquid nails or acrylic putty.

If you decide to cover the ceiling with plastic panels with your own hands, then you should listen to the advice and recommendations of professionals:

First, decide which panels you want to lay on the ceiling. These finishing materials should match the main interior in style and color.
Don't look for panels that are priced too low. Most likely, these are low-quality materials that contain toxic elements harmful to health.
It is advisable to make an estimate in advance for the installation of such finishing materials.
If you are filing PVC panels, then all the wires must be hidden inside the corrugation. A similar rule should be followed when laying MDF boards. These are fire safety requirements.

According to experts, it is quite difficult to correctly assemble and install a frame (especially a metal one) alone, so it is recommended to carry out such work in pairs with an assistant.
At frameless method During installation, never neglect the preparation of the ceiling base, especially if it has various defects (cracks, potholes). Only after removing old coatings and repairing damage do we sheathe PVC ceiling-panels.
After installing the sheathing, you need to check it for horizontalness and the absence of differences/irregularities.
If you are using a plastic frame, then you should not use screws, but special staples that are installed using a construction stapler.
If you are going to add plastic ceiling big chandelier or a second ceiling level, then you need to strengthen the sheathing. To do this, install more guide profiles, leaving a minimum gap between them. This applies to both metal and wooden frames.

It is not recommended to cover the ceiling with plastic panels in a room with low temperatures.
For repairs you need to purchase a quality finishing material. To check this parameter, you should squeeze the end cut of one of the panels in your hand. This part should not be severely dented or cracked. High quality material when compressed, it can only slightly decrease in thickness, and then quickly recover.
If you are going to supplement plastic panels with lighting fixtures, then you should purchase materials with deep seams.
After installation, it is not recommended to clean plastic panels with caustic substances or aggressive chemicals. It is better to use a regular sponge or a damp soft cloth.

Beautiful examples in the interior

Plastic panels can be used to cover the ceilings in almost any room. Correctly selected coatings will look impressive in the kitchen, in the hallway, in the bathroom, and in the toilet.

For example, in a kitchen with light walls and a brown wooden cabinet, sectional white or beige panels with golden dividing stripes will look harmonious.

This ceiling should be complemented with recessed lamps with gold-plated edging.

In the bathroom, you can sew up any type of plastic panels, from slatted to seamless. The main thing is that they match the color of the tiles. White coatings are universal. They may contain silver or golden colored separating stripes. Against the background of such a ceiling, both light and dark colors will look equally harmonious. wall materials finishing.

Light plastic panels are an excellent solution for narrow corridor or a small hallway. Such spaces can be visually expanded by glossy or mirror materials. If you back them up with suitable lighting fixtures, the environment will become very bright and welcoming.

And diamond-shaped or square-shaped mirror panels can even be installed in more expensive and pompous interiors. They look especially impressive and attractive if they are complemented with a lush chandelier with pendants and chrome parts.

Such a bright and expressive ceiling finish can be used not only in the corridor or hallway, but also in the living room.