How to cover a corner sofa with your own hands. Correct upholstery of a sofa with your own hands. Making a sofa cover

No matter how good, comfortable and high-quality the upholstered furniture is, over time the upholstery wears out and the sofa becomes unusable. And not only the appearance deteriorates, some structural parts become unusable, springs are deformed, the filler is wrinkled, restoration and cleaning are required. Often it is necessary to restore not new upholstered furniture, but, for example, donated, given away or antique. If you have the finances, you can take the furniture to a specialized company for reupholstery, but you can master this simple process yourself. It’s worth talking in detail about how to reupholster a sofa.

If the upholstered furniture in the house is similar in design, but has different upholstery and degrees of wear, you can reupholster the entire set at the same time, resulting in a unique furniture set. Although this will entail additional costs, updating the furniture will cost several times less than completely replacing it with a new one. If you master reupholstering a sofa, then changing the upholstery of armchairs and chairs with soft backs will not be difficult for you. But it's easier to start with a sofa, since there are fewer different structural parts, and the surfaces themselves are larger, and it is much easier to hide the seams and hems of the fabric.

When starting restoration, it is important to think through all stages of the work:

identify all defects that arose when using the sofa;
decide on the type of upholstery;
calculate the upholstery footage;
make preliminary cost calculations;
purchase upholstery fabric;
prepare everything necessary tools;
disassemble the sofa;
carry out general cleaning inside;
make the necessary restoration;
reupholster the sofa step by step.

Having no idea how the sofa works inside, do not rush to get down to business. The easiest way to reupholster a sofa is with simple geometric structural details. In this case, there are no problems with complex patterns and intricate details.

People say that the eyes are afraid, but the hands do the work, so if you have any doubts or questions, you should watch the video on how to reupholster a sofa with your own hands. Then all you need is patience and time.

Main defects of old sofas and signs of wear

Definition " old sofa” is very relative, that is, “new” means just purchased. A used sofa may have varying degrees of wear and tear, and this depends on various reasons:

degree of daily load;
layout frequency;
the room in which it was used;
additional loads, for example, when children often jumped on the sofa.

A sofa on wheels experiences the greatest load precisely in the roller part of the legs, and it is important to pay attention to this. The degree of wear of the sofa is determined by:

on legs and rollers;
dirty upholstery;
seat deformation;
crushing of the filler;
spring stretching;
integrity of the layout mechanism.

It is these parts of the sofa that are subject to careful inspection and restoration. This will entail additional costs, but it is unlikely that there will be another opportunity to look inside it in the coming years.

The easiest way to reupholster a book sofa yourself is because it has the fewest structural parts and the simplest layout mechanism.

The most necessary tools for restoring a sofa:

drill;
nail puller or screwdrivers;
pliers;
furniture or construction stapler with staples;
scissors and chalk (marker);
needle and thread for basting;
glue gun;
sewing machine.

Reupholstering a corner sofa with your own hands is much more difficult than restoring a simple ottoman, kitchen sofa or book sofa. The main stages of work are the same, but you have to take it into account design features and cutting difficulties. The most difficult thing is to assemble it after restoration and bring it back to its original condition. The same is true for some types of layout, for example, automatic. If you don't have the skill to replace them, you shouldn't touch these corners. In such cases, it is important to securely fix the folding part during operation.

You should not reupholster the sofa yourself if:

The sofa model has a complex configuration and upholstery elements that will be difficult to restore with new material.
Furniture has complex design or a transformation mechanism that prevents access to the inside of the sofa.
You have doubts that after disassembling the furniture, it can be assembled again to working condition, including the frame, filling and other structural parts.
You have expensive Italian or antique furniture, the restoration of which can only be entrusted to specialists.
You are afraid of the difficulties of working with upholstery materials, such as fine leather or hand-woven antique tapestry.

Possible difficulties when restoring and reupholstering sofas

When disassembling the sofa into structural parts, remember that you cannot do without this stage. Review the supporting frame wooden frame and other details. Most often, a crack or broken board is detected. When it is not possible to remove it and replace it with a similar one, you can fasten it on both sides with a corner and tighten it with screws.

Review the integrity of all accessories: transformation mechanism, screws, slats, etc. If there are defects or severe wear, replace them with analogues and check the accuracy of the fit.

If the old sofa creaked, you need to reconsider all the joints, they need to be adjusted and re-glued. Avoid toxic adhesives as they may produce harmful fumes for a long time, and you will have to inhale it involuntarily while sitting on the sofa.

Carefully review the entire spring block, and if something is wrong, correct it. Sometimes you need to bandage the springs or replace one of them. Usually sofa springs are strong, but their grip becomes deformed. The springs sticking out in the seat need to be shortened, compacted or replaced; for this you can take the same ones from the extreme corners of the sofa.

You should not tie the springs too tightly, as this will hinder their normal operation. Filler and padding are placed on the springs.

We disassemble the sofa into structural parts

How to choose the right upholstery fabric?

When choosing upholstery, you need to focus not on the prestige or cheapness of the material, but on its appearance and practicality. If the sofa serves its intended purpose occasionally, for example, in country house, then the choice depends on whether it will be used often. Often, especially elegant or antique sofas are covered with expensive tapestry, silk, leather or fur - to emphasize the status of the owner and decorate the living room.

If the sofa is the main place for family communication, then you need practical upholstery, which is difficult to spoil with anything. This could be a special imported upholstery fabric or a sofa velor with a pattern where dirt is not so visible. Those fabrics that are used for sewing clothes will not be suitable, but they can be used as removable covers if necessary.

Most often used for reupholstering furniture:

special synthetic velor;
furniture tapestry;
shinil;
skin;
furniture jacquard;
low-pile faux fur with a dense base;
high quality leatherette.

Advice: It is impossible to say anything unambiguous regarding the color - it all depends on the style in which the product is made and on the interior design. Jacquard and “flower” would be appropriate in country style, and expensive striped satin or tapestry would be suitable for furniture in historical styles. Leather is not appropriate for every style, and white, brown and black leatherette is very similar to genuine leather, but much more practical and cheaper. The upholstered sofa should be in harmony with common interior. Acid and bright shades are best chosen for a youthful interior, but remember that they are tiring and are not suitable for the area comfortable rest. When choosing fabric, you can also use the hint in the photo:

Features of reupholstering a leather sofa

Upholstering a sofa with leather is the most difficult process, especially if it is an antique. The most complex types of work should be entrusted to professionals, for example, instruct a carpentry shop to turn similar legs. Leather for a sofa, as a rule, is saved and diluted with leatherette similar in texture and shade for hidden and rear upholstery elements. Although only one part of a leather sofa needs to be replaced, the new leather will contrast against the old sofa, even if the color is the same.

Disassembling a leather sofa into its components is similar to any other, but worn leather can be difficult to remove without damaging it, especially when removing the staples. It is important to remember that the leather shrinks a little over time, so along the edges of the old patterns for cutting we add a little allowance - about 1 cm. It is easier to cut out symmetrical parts one pattern at a time. The most difficult thing is to calculate without experience required amount skin, so it is better to purchase material with a reserve; the trimmed flap may be useful for the next restoration.

When cutting out leather parts, it is important to remember that leather can be different thicknesses both quality and the strongest pieces will be used for sitting and top part backrests - under the back of the head and shoulder blades, as well as on the armrests. All pieces of leather are carefully inspected for defects, especially when purchased in bulk. If there is not enough leather, then inconspicuous and rear parts can be replaced artificial leather the same color.

Tip: It is better to check the stitching on a leather machine in 2-3 layers in advance, since not every machine is adjusted for leather. Using a sample, select the stitch width and check the strength of the threads (only strong, silky synthetics). If the machine does not cope with the task, entrust this operation to a workshop. And remember that skin requires special care with special products. Stains on the skin are removed with alcohol, acetone, gasoline, glycerin or stain remover, which should be tested on a separate piece of leather to see if the paint will peel off.

The most difficult type of furniture reupholstery is the restoration of an antique sofa, especially if all the parts are dilapidated. Sometimes it is easier to make an exact copy from professionals in furniture workshop than to do a thorough restoration. Today, a whole technique has been developed on how to make wood look dilapidated or how to visually age it. new furniture so that it does not differ from the best antique samples. At the same time, there will be no problems with its operation, because it is no secret that antiques are practically not used for their intended purpose.

Everyone likes change. If an old, but beloved and familiar sofa has worn out, and you have not yet saved up the money to buy a new one, you can update it by upholstering it with a new one beautiful upholstery. You need to figure out how to choose the material and then cover the sofa with your own hands.

If your sofa is worn out and looks ugly, then reupholstering it will be the way out of this situation.

You need to start with the main thing, without which it is impossible to start work, with tools and materials.

Tools and materials

How to upholster a sofa yourself? It is necessary to prepare in advance the tools that are available in the house:

In the process of reupholstering the sofa, you will need a construction stapler.

hammer;
Screwdriver Set;
scissors;
hex wrenches;
screwdriver;
wire cutters;
construction stapler;
pliers;
pliers.

Now about the materials. First of all, this is upholstery fabric. The main requirements for it are as follows: it must be strong, easy to clean when in contact with external environment, do not lose its original appearance. The following fabrics are most often used for upholstery:

Tapestry - practical and cheap fabric, dense, 100% cotton with woven patterns various shades and colors. Has dust-repellent properties.
Jacquard fabric is expensive, looks very solid, is easy to clean, strong, durable, and wear-resistant.
Flock is a fabric similar to leather or suede, but much cheaper. It is easy to clean, does not fade, durable, velvety, pleasant to the touch.
Shinil is a fabric containing 50% synthetics and 50% cotton. Similar to velor, but of higher quality. Strong, breathable material.
Artificial suede is a durable, environmentally friendly material that is easy to clean. Can be washed in warm water. Visually it is not easy to distinguish natural suede from artificial one.
Leather. Both artificial and natural materials are used for furniture upholstery. Solid, strong and comfortable material.

In addition to upholstery fabric, you will need to prepare braid, furniture tape and piping. Also needed:

plywood sheet;
foam;
padding polyester;
special staples;
piece of chalk;
strong threads or twine and needle;
nails;
screws and bolts;
wood glue or PVA.

To change the upholstery of the sofa you will need foam rubber.

When buying foam rubber (polyurethane foam), you should note the following properties:

softness;
density;
elasticity.

The thickness of polyurethane for a sleeping sofa should be at least 4 cm. Markings will help you find out its density, where letters indicate the brand, numbers indicate density (the first two) and hardness (the final two). To sit on a sofa, you need foam rubber with a hardness of 40 to 50 units.

For different parts For sofas with unequal loads, polyurethane is selected with different densities: for the seat - with a higher density, and for the back and armrests - with a slightly lower density.

The heaviest load is placed on the seat, so you should choose foam rubber with a density of 40 kg/m³ (EL4050 brand), but you need to lay super-soft polyurethane foam on top.

For the handles and back, you can use foam rubber with a lower density, for example, 25 kg/m³.

Dismantling an old sofa

Use a nail puller or screwdriver to remove the upholstery from the sofa.

Before starting the main work, you need to carefully inspect the condition of the furniture. Use a screwdriver to remove the upholstery from the furniture. Then it is recommended to pry the staples. If they are firmly fixed, then you need to use a flat-head screwdriver and pliers.

To repair an old sofa with your own hands, you need to inspect all the wooden elements. For a detailed examination of the frame, you need to remove the backing. All joints and fastenings must be checked for strength. It is better to replace screws and bolts with new ones. Broken and old structures must be replaced with new components from wooden beams, fiberboard sheet or plywood sheet. At minor damage the product can be corrected using construction tape and wood glue. Special attention should be given to fasteners. Replacing them will allow you to extend the life of the sofa for a long time.

To repair a sofa, you need to separate the seat from the back:

First, unscrew the bolts holding the armrests to the sides.
Then remove the side surfaces and disconnect bottom part furniture.
Unfold the sofa and turn it over outer side to the floor.
Remove the backrest and remove the metal mechanisms holding it in place.
Dismantle the seat and remove used fasteners: staples and nails.
Remove the old drapery and take out everything that is filled with the sofa.
If the springs are not damaged, then leave them, and if there are damaged ones, then remove the block.

There is no need to rush to throw away the old upholstery; it can be useful as a pattern for a pattern when sewing new covers.

Sofa interior repair

Use pliers and a hammer to remove old springs from the sofa.

First you need to start repairing the spring blocks inserted into the back and armrests:

Use pliers to unscrew the damaged springs.
New springs must be installed to replace the removed springs.
Attach the spring blocks to the sheathing with nails.

If the springs on the seat are particularly worn out, they can be made elastic again:

Cut the polyurethane into small pieces.
Stuff the spring block tightly with these pieces.
Cover it with an old blanket or some material, such as burlap.
Attach this entire layer of material with nails to the box.
Attach the springs to the material using twine and a thick needle.
If there are depressions between the springs, fill them with foam rubber or cotton wool.
Cover everything on top with binding material, for example calico, and secure it with nails, pulling it tightly.
Apply glue to one side of the polyurethane and place this side on the material. The foam will stick and the surface will be smooth.

If there are sagging springs, do not throw them away; you can stretch them and they will still serve. To make the sofa more voluminous, you can put padding polyurethane on top of the polyurethane.

When all of the above work is behind you, you can start sewing covers for the sofa.

Upholstery and reupholstery of furniture

Each detail of the sofa should be cut out separately.

Now you need to figure out how to cover the sofa. First you need to cut the fabric. The fabric chosen for drapery is laid out on the floor or on a huge table, used covers are placed on it instead of patterns and outlined with chalk. They cut the fabric, leaving allowances, and sew new covers on a machine. When sewing, it is necessary to take into account that the seams receive a large load during operation. Therefore, their strength is mandatory. You can use reinforced threads when sewing and sew in 2-3 layers.

You can use decorative tape or braid at the joining points. These materials will cover up unnecessary or unsuccessful seams and give the product a decent look.

When everything is ready, you can put new covers on the seat, armrests and backrest. The attachment points for the new upholstery should be in the same place where the old covers were attached.

You can attach the covers with a stapler, tensioning the material each time you insert the next fastener. The upholstery on upholstered furniture should stretch well. The fasteners should be located every 2-3 cm. This will ensure a strong and reliable fixation of the upholstery. Fabric sagging is unacceptable. But excessive fastening is also undesirable. Therefore, this procedure requires caution and accuracy. During finishing works it is necessary to control the degree of fixation.

In order for the upholstery to lie flat, you need to find the middle of the long side of the sofa, drive in the fasteners, and then move gradually from there to the edges, alternately driving in the fasteners on one side or the other of the first fastener.

Having finished with the upholstery, assemble the sofa with your own hands in the reverse order:

Strictly control that the marks match.
Attach the lock first to the back, then to the seat and the bottom of the sofa.
Secure the sides.
Attach elbow pads to them.
Pin wooden panels, pre-coating them with varnish if necessary.

Anyone who wants to do this can upholster a sofa with their own hands, because there are no barriers for an interested person.

To decorate the sofa and disguise imperfections, you can make several decorative pillows from the same fabric. This will give an organic and undivided look to this design. A set like this looks great and will be complete. And the pillows will also perform a practical function: they are comfortable to lean on. They will act as side backs. Now you know how to upholster a sofa, and you can do it yourself.

No matter how hard we try to maintain comfort in the apartment at the proper level, sometimes it’s just worth looking around and admitting to yourself that something needs to be changed or corrected in the design. Over time, every piece of furniture becomes unusable. Sofas are no exception.

The place where we spend enough a large number of spending time with the family, or simply receiving guests, or reading a book, I would like to see it in good condition. No matter how often we use a sofa, it can quickly take on an unpleasant appearance.

Scuffs, aging, a stain from spilled coffee that cannot be completely removed no matter how hard you try, and children in the heat of play do not always understand what their actions can lead to. Here is just a small part of what can affect outer skin sofa

Now ask yourself the question: “Is it possible to do something about all this yourself, at home?” Answer: “Yes, you can.”

In this article we will look at the step-by-step process of reupholstering a sofa without resorting to outside help. Of course, it is worth mentioning that calling specialists to your home to show a master class will be less time-consuming, but at the same time more expensive. It's up to you to choose.

What will we face?

First of all, it is worth pointing out cases when it is not worthwhile to restore a piece of furniture yourself:

a very complex process of disassembling and assembling furniture;
the upholstery elements contain such parts, the configuration of which is not possible, or their implementation is difficult, due to the use of a material different from the original one;
not only the upholstery needs restoration, but also the frame itself, or the filler;
the material that needs to be sheathed is difficult to use;
lack of basic skills and experience.

So, we decided to carry out the restoration process of our sofa ourselves. All of the above options are not about us. This means we are moving towards the intended goal.

Preparation work

First of all, it is worth deciding on the material and equipment that we will use during the work process.

The choice of upholstery material should also be based not only on your personal preferences, but should also take into account, for example, the design of the room as a whole. Moreover, there is a large amount of information on cladding and it is worth consulting first before making a choice.

The photo in the catalogs of any sewing store presents a wide range of materials that can be used to upholster a sofa and sew pillows. Leather, leatherette, velor, flock, tapestry and jacquard are in demand.

Here are some tips for choosing fabric:

Do not use synthetic or rough fabric;
It is worth taking upholstery for the cover, which is pleasant to the touch;
to reduce the cost of the material used, you need to use a plain material or with a small pattern;
You can achieve some kind of contrast or a pronounced style by combining a plain material with some multi-colored fabric;
In order to give the necessary softness to the furniture, materials such as foam rubber or synthetic winterizer are used.

Sintepon will add airiness upholstered furniture. A pronounced chemical smell can be a warning sign of poor quality.

Sintepon is a durable material, and therefore changes very little if everything is done technologically correctly. When applying, you should pay attention to the thickness of the material and its strength. It is extremely important that it is the same over the entire application area.

With the use of foam rubber everything is a little easier. The quality of the material is determined by its structure. A high quality material, when compressed, will immediately restore its original shape, but a low quality material will take time. It is worth mentioning that in high-quality furniture, pads made of batting, etc., are used between the human body and foam rubber.

Advice: Pay attention to the smell of the future upholstery, it should not be repulsive.

Preparing the tool also takes a separate place, here is some of what is needed:

scissors;
threads, strong;
spanners;
sewing machine;
an anti-stapler or a screwdriver, whichever is more convenient for you;
stapler

Furniture disassembly

Of course, before we get to work, it’s worth disassembling a piece of our furniture (keys will help us).

Don’t forget about some notes for yourself in this process, otherwise we can take it apart, but put it back together – problems may arise. The process requires accuracy on our part, which means we shouldn’t barbarically tear off the fastenings if it didn’t work out right away.

Elements such as sidewalls and backrests must be disassembled first. Step by step process showdown:

seats;
fasteners must be marked and stored in a specific location;
there are staples - use an anti-staple gun or a screwdriver;
we handle the old upholstery carefully, this is our stencil for the new one;
if it is necessary to replace foam rubber or other material, and we see it, then we do it without hesitation;
we look at the elements of the exposed structure (if necessary, replace the springs, tighten the structural elements, glue them where necessary);
We eliminate defects that are visible.

It is not necessary to follow these instructions strictly, but it is definitely worth paying attention to.

Upholstery

Here is the finish line. In order not to delay the reupholstery process, after disassembling the sofa, there should be old upholstery material on your hands.

This the best option, which will reduce the time for restoration. Especially for corner sofas or furniture with complex structures.

We take new upholstery fabric and cut out parts from it using the contours of the old one. You can first mark this outline with chalk or soap, applying the old upholstery as a stencil and adding 3-5 centimeters of reserve.

For most of the sofa, such actions are enough, but with pillows the situation is not so rosy. Here you can’t do without a master at hand, but we don’t have one, which means we’re organizing our own master class:

take a tape measure and make necessary measurements(length, width, height to help us);
we take the upholstery fabric and take the corresponding measurements, adding approximately another 3-5 cm to each (the additional dimensions will be used for folding the fabric);
there is a figure - cut it out;
place the pillow in the center of the resulting figure (don’t forget that the fabric has a back side so you don’t have to redo it);
we wrap the material and fix it with staples, for the most part the staples are located at a distance of 3-4 cm;
if there is a pattern, stretch the material evenly so that the pattern does not warp;
Then we repeat the re-upholstering method for the rest of the pillow.

Note: When buying material, pay attention to the shade, it may not match.

This method will allow us to cover the remaining parts of the sofa with our own hands. Do not forget that the material taken “back to back” may not be enough, be careful.

Buying upholstery material with a reserve will save you from unnecessary expenses. The remaining material can be used to reupholster something else, fortunately there is enough imagination.

And finally. You should not jump above your own head; if you are not confident in your abilities, it is better to contact specialists. They will help transform the sofa. You can also watch the special video below to better imagine the whole reupholstering process:

A new piece of furniture in the house always brings a certain joy to the owners. It's hard to imagine an apartment without a sofa, armchairs and other upholstered furniture. But after a few years, the upholstery loses its former attractiveness, becomes unusable and no longer fits into the interior of the room. Often in such cases it is thrown into a landfill or taken to the country. Sometimes specialists are invited to reupholster and give the furniture a new look.

But not everyone knows that reupholstering a sofa with your own hands is not a very difficult task.

How to repair furniture at home, what difficulties can you encounter and how to overcome them? Difficulties may arise if:

The cutting of fabric furniture parts is done according to patterns.

The furniture has a very complex structure and is difficult to disassemble.
Individual parts are made in complex geometric shapes, making it difficult to correctly cut new upholstery.
The service life of furniture is 7-10 years; not only reupholstery is required, but also frame repairs and replacement of the filling. Professionals can do this job better.
The furniture is expensive, antique, you don’t want to accidentally ruin it.
It is planned to use natural leather as a new material for the upcoming reupholstery, which is not easy to work with.

In all other cases, you can reupholster any sofa yourself. It is worth considering this issue step by step.

Tools for work

Sofa upholstery: a – soft and upholstery materials; b – cutting; c – order of upholstery and reupholstery.

When performing work on reupholstering home upholstered furniture, the following tools may be required:

A flathead screwdriver or staple remover to remove old staples.
Wrenches from 8 to 19 mm.
Nippers, side cutters and scissors.
Stapler.
Sewing machine.
Titan threads with high strength.
Decorative buttons may be needed to decorate pillows.

Return to contents

Main stages

Do-it-yourself reupholstery of a sofa and other upholstered furniture includes several main steps:

Disassembly with removal of individual components in the form of pillows, sides, poufs. Scheme spring sofa presented. Disassembling the sofa is done using some tools. First, carefully disconnect the sides, remove all the overhead elements, the seat and the back. This is usually done quite simply, since manufacturers assemble furniture with high maintainability. Place all fasteners in a container so as not to lose them.
Removing what has become unusable old upholstery. Worn upholstery can be removed using an anti-staple gun, which can be replaced with a regular flat-head screwdriver. The work requires a certain amount of care so as not to tear the old casing and use it as a pattern for cutting out parts from new fabric. All internal cavities are cleared of debris and dust. Old foam rubber should be mercilessly thrown away, since usually only dust remains from it. All metal mesh, various kinds of stretch marks, as well as springs need to be carefully inspected and some detected defects must be eliminated. Nylon or fabric stretchers should be replaced with new ones. All screws must be carefully tightened, the joints of the parts must be strengthened, and the wooden joints must be glued.
Uncover new upholstery parts. The result of the entire reupholstery of the product largely depends on the quality of the new patterns. Old upholstery can serve as a pattern for the pattern, if you leave an allowance of a few centimeters at the edges of the new fabric. Worn parts of the old upholstery are placed on new fabric and traced with chalk, then cut out with tailor's scissors.
Attaching new upholstery to furniture parts. The fabric on the sofa parts is stretched evenly so that the pattern on the fabric does not warp. The material is secured using a stapler. The distance between the staples should not exceed 4 cm. In order not to make a mistake with the amount of new fabric, it is recommended to buy it with a small margin. The remaining material can be covered with kitchen stools or sewn from it decorative pillows. Foam rubber is cut out and attached in the same way as fabric. You can cut it sharp knife. Leftovers can also be used to upholster stools and sew decorative pillows.
Assembly of an updated design.

The same procedure is used to reupholster any sofa, including a corner sofa.

Surely everyone in the house has upholstered furniture, which for several years in a row has received sidelong glances, because the hand rises to throw it away, maybe an antique, or a gift from a beloved mother-in-law for her birthday, and it is impossible to use, because the luster is no longer the same, but creaking remained. You can remove this issue once and for all - resolutely and solemnly take responsibility and rid the family of the creaking tyrant. Or you can try to reupholster the sofa and give it a second life. At least you can try, but throw it away anyway.

Reupholstering a spring sofa, video tutorial

Before reupholstering a sofa with your own hands, you should think a hundred times whether it is necessary to do this and how high of a value it represents in terms of upholstered furniture, in terms of the space occupied and ease of use. There are times when the whole family is just waiting for that moment for that very board to fall off the sofa, which will overflow the cup of everyone’s patience and the hated creaky and unaesthetic tormentor will be taken to the trash heap to applause. Happens. But it’s always easier to throw it away, so if the sofa somehow justifies its existence (the same mother-in-law, for example, will be able to spend the night on it once when she accidentally comes to visit), perhaps it makes sense to think about reupholstering the sofa with your own hands step by step video of which we have posted below, extended it happy Days in the apartment.

If this video was inspiring, then you can try to do something similar with your own hands. Taking into account useful tips, which are given by experienced furniture makers.

What upholstery material to choose

In general, choosing fabric for upholstered furniture is a thankless task. It is very difficult to assess the effect that it will produce in combination with our old ruin. There are a lot of nuances to consider here:

Also, a lot depends on where the sofa ends up after reupholstering. We mean a room in the house. If this is a sofa for the kitchen, then there can be no question of any woven materials. They will quickly absorb odors and then the fate of the sofa will be decided even faster. In addition, there is constant humidity, the risk of kitchen sofa stains from liquids and grease, rather, suggest that the upholstery material should be inexpensive leatherette or something similar.

Materials for a sofa in the living room

If the leather-like fabric meets the requirements for the living room interior, then it makes sense to choose more expensive leatherette. At the very least, it should not creep away from tension; the substrate should be moderately strong and moderately soft. Smell. This is the scourge of cheap leatherette. It is almost impossible to eradicate it, and if there is still some way to deal with it in a car, there are enough of their own odors, and it dissipates faster in the car, then the living room can turn into a small branch of a chemical plant for several months. The joy of drinking tea on such a sofa will most likely not be enough.

There are woven water-repellent fabrics with special impregnation, but even experienced furniture makers do not always undertake reupholstery with such material. It can be more capricious than the thickest tapestry. This is also worth considering. The rigidity of the foam rubber is no less important. As a rule, for reupholstering this kind of product, foam rubber with either HL hardness or the hardest EL is chosen. Too much soft foam it will quickly sag and crumble, one that is too cheap will fall apart, one that is too thick will be difficult to shape, and one that is too thin will lead to rapid wear of the upholstery, and not everyone will find it comfortable to sit on.

Tools and technological subtleties of reupholstery

Reupholstering upholstered furniture with your own hands, and even more so a complex sofa, is impossible without minimum set tools. Of course, you can do without, for example, a stapler, but then re-stretching will take a hundred space years and will turn from pleasure into heavy duty. Here is an approximate set of tools that is needed to reupholster a sofa of any configuration:

Talking about the technological aspects of upholstery without knowing the design of the sofa is sinful idle talk, so we will limit ourselves to general recommendations, which are given by experienced furniture makers.

Actually, this is all you need to know about how to delay the removal of your old sofa for scrap and save a little on buying a new one. And the money saved can be spent on buying a good professional stapler. You never know what else will have to be tightened.