Shower cabins for a small bathroom. Bathroom interior with shower. Tile design for bathroom with shower

Shower cabin - comfortable and stylish solution for those whose bathroom sizes leave much to be desired. Introducing: a shower stall in a small bathroom – photos of the best solutions.

Residents Western countries People have been installing shower cabins in their apartments and houses for a long time. The same cannot be said about the residents of our country, where showers became widespread ten years ago. During the Soviet era, the range of goods, like , was so narrow that there was no question of choice. The Soviet assembly line produced only a few models of any product. Considering the small size of the apartments we inherited from the period Soviet era, it is surprising that showers have not become a common feature of our everyday life in such a time. The widespread use of shower cabins in Russian apartments is still a long way off.

Taking a bath is relaxing, there are times when a bath is not recommended medical indications. A shower is more likely to invigorate you, which is especially important in the morning.

Saving. When you take a bath, you use a lot more water than when you take a shower. According to experts, when taking a bath, you spend 3-4 times more water than while taking a shower.
Rapidity. To take a bath, you will need to spend time filling it with water. The bathing process itself will stretch into splashing, lying, and dreaming. To take a shower: stand under running water, wash yourself and run. Clear time savings.
Compactness. Even the smallest bathtub will take up more square footage than a built-in shower stall in a bathroom.
Hygiene. Dirt, germs and bacteria are less likely to accumulate and multiply in the shower stall, since it has running water.

Choosing the type of shower cabin

There are several types of shower cabins. Firstly, open and closed are distinguished.

Open

This is a simple shower stall without any bells and whistles, consisting of a tray and two partitions. The tray is installed in the corner of the bathroom, and the partitions run from one wall to the other.

The advantages of these cabins are that they are compact and inexpensive.

When purchasing an open shower stall, choose higher partitions to protect yourself from water spills.

Closed

The second category is a sealed capsule. In addition to the pallet and walls, it also has a roof. This design is completely sealed. It not only prevents water from entering the shower stall, but also protects the bathroom from condensation and moisture. and bathroom items will not be subject to temperature changes and high humidity.

It does not have to be installed in the corner of the bathroom.

The undoubted advantage of such booths is the use of advanced technologies in them. For example, the presence of a hydromassage or a radio.

Basic models of shower cabins

Let's look at the main types of shower cabins.

Open shower corner

Characterized by the absence rear walls and the presence of side screen partitions.

partitions are held on hinges or mounting profiles, which visually increases the space in small bathrooms;
the walls are fixed around the perimeter of the frame; this model is often equipped with sliding doors, which allows you to compactly place a shower corner;
the internal partitions are attached to a frame structure, whose strength and stability makes such a shower corner attractive to the buyer.

Based on their external shape, shower corners are classified into semicircular, rectangular and square. When choosing one or another design form, it is important to focus on the size of the bathrooms. Rectangular shower enclosures are more appropriate in spacious bathrooms.

Most of the space in the bathroom is occupied by square and rectangular corners.

If you need to save space, opt for semicircular partitions. By smoothing out sharp corners, several centimeters of space are freed up, which allows, for example, to install a hand-washing sink closer to the shower corner or provide space for free movement.

Without top partition

A shower stall in a bathroom without a top cover has its pros and cons.

reasonable price (compared to closed capsules);
the cabin can be easily installed in a room with low ceilings (no higher than 2.1 meters);
the design will allow all family members whose height exceeds 1.95 m to shower comfortably;
rear partitions partially protect the walls from water entering them.

incomplete waterproofing, as a result of which fumes settle on the ceiling and walls outside the cabin; therefore, it is worth taking additional care of the moisture resistance of the material of the walls, ceiling and furniture, otherwise you will have to wipe them dry every time after taking a shower;
often water and steam get into the cracks located between the walls and partitions, because of this the walls become covered with mold; the problem is eliminated with the help of special drains;
It is useless to install a steam generator in open shower cabins, so this option is not suitable for those who like to steam in a mini-sauna;
open cabins are not intended for rain showers and cascade showers.

Sealed capsule

High price, large dimensions, reduction of internal space due to the top coating are just a few disadvantages that are compensated by a lot of advantages.

placing the cabin anywhere in the bathroom and even outside it;
installation of a deep tray, which is convenient if you have small children and pets (the tray can be used as a bath);
wide additional functionality (various types of lighting, hydromassage, Charcot shower, cascade and tropical shower, « Finnish sauna", "Turkish bath", foot massage, etc.);

Complete sealing of the cabin will protect the walls, ceiling and bathroom furniture from dampness and extremes temperature regime indoors, reliable sound insulation and independence from the external microclimate.

Hydrobox

It is a combination of a shower cabin and a bathtub. This design is preferred married couples with children and those who like to swim while lying down.

A shower box offers the same benefits as a sealed capsule. You can also install a landline telephone, radio and even a compact TV in it, or you can additionally equip the walls with shelves and cabinets for bathroom accessories.

Selecting pallet materials

When choosing a material, think about how long it will last you. Pay attention to noise levels and heat conductivity. Find out if the surface is too slippery.

Acrylic

Popular material, heats up quickly and retains heat for a long time. Quiet and safe - not slippery and does not make noise under streams of water.

Acrylic is easy to process. Due to this, you can give it any shape and attach additional details.
Easy to clean and retains a fresh look for a long time.
It lasts 15-20 years, and minor damage is corrected with a special paste.

Acrylic has only one disadvantage: without reinforcement with plates, it bends and then breaks. When purchasing, you should pay attention to this. If the manufacturer has not strengthened the pallet, it is better to buy metal carcass additionally.

Cast iron

To “kill” a cast iron pan, you need to work hard.

Serves for decades;
Keeps warm well, but takes a long time to warm up;
It is inexpensive compared to other materials.

It weighs a lot, there is no variety in the choice of shapes: several standard models are sold;
Cast iron reflects loudly the impact of a jet of water. If this is important to you, please note: the thicker the pan, the less noise it makes;
Enameled cast iron may chip and the coating layer will have to be replaced.

Steel

It is durable and much stronger than acrylic, but the pallets are covered with enamel. The service life depends on the quality of the coating. Light weight and cost are a plus, but there are disadvantages.

Steel pallets slippery, it is better to take one with a corrugated bottom or lay a rubber mat;
They heat up slowly and retain heat poorly;
Sound insulation is worse than cast iron.

Ceramics

Aesthetically beautiful, long lasting;
Ceramic is easy to care for;
High level of sound insulation;
Ceramics heats up slowly, but holds heat much better than steel and cast iron.

The disadvantages include heavy weight, high price and fragility: if you dropped the shower head, it cracked.

Stone

The main material is marble, but there are other options.

Durable, stylish and beautiful looking;
They heat up quickly and do not cool down for a long time;
The roughness of the stone is pleasant to the skin.

Natural is expensive. But you can choose a pallet from artificial materials: porcelain stoneware is durable, similar to real stone, but not so expensive.

Tree

More suitable for a summer residence. Requires correct processing, without which it will not last long. As an option: make it not entirely out of wood, but only the bottom. Stand and lie on wooden covering Very nice.

From my own experience I can say:
looks stylish;
pleasant to stand;
does not get cold feet;

but more difficult to clean.

Choosing material for the partition

Water-repellent curtain

It is impossible to wash in an open shower stall, because splashes fly in all directions. A waterproof curtain is a reliable barrier that saves the room from flooding.

This accessory is often made of colored polyethylene film, rubberized fabric or oilcloth.

If the cabin has low sides, choose a curtain with weighting along the lower edge. It better protects against water, ensuring complete tightness.

Polymer partitions

Acrylic, PMMA and plexiglass - these polymer composites are used for shower renovations. They have earned great popularity due to their ease of care and high aesthetic qualities. The ability to use different finishing methods allows the use of polymer partitions in various interiors

They look very much like glass partitions, but they weigh less and are easily scratched. So be careful with aggressive detergents and hard brushes when cleaning.

Plastic screens

Budget material for bathroom partitions. It lends itself to any type of processing; it is easy to assemble a shower cabin from it with your own hands. Plastic is an inexpensive finishing material that is used to decorate sanitary areas in hospitals and other government institutions. Therefore, before installing plastic screens, think about whether you will feel comfortable in such a room.

Inexpensive, but requires a frame, as the plastic bends easily.

Strained glass

Shower doors made from tempered glass, hard to damage. Heat treatment gives surface strength. This quality allows you to safely operate the structure in rooms with high humidity, where it is so easy to slip and fall.

Tempered glass looks expensive, making the bathroom impressive and stylish. Its only drawback is its predisposition to the formation of limescale. To avoid this problem, wipe the glass doors dry every time you shower.

Choosing a package

Faucets

The right choice of a mixer for a shower stall with a tap (they probably don’t produce another one anymore) is reliability and functionality. Washing and showering become a pleasure. The faucet will not fall off, the shower hose will not leak, and there will be no rust.

Installation of a shower cabin. Here your needs are solved - simple water procedures or a massage shower.
Manufacturer. There are well-known quality brands.
Material that can withstand the effects of aggressive additives and hard water.
Mixer design. Lever or with taps. Despite the popularity of lever faucets, faucets with separate taps have their advantages:

Taps are more durable.
Adjusting the water temperature is easier.
Turn the tap slightly to open the water (for some models).
Special valve material (for some models) eliminates heating.

It is possible to have a shower stall with a separate faucet for washing, but this is more of an exotic option with a very minimal bathroom area.

Shower head

Attaching the shower head. Can be done on the side wall of a small shower stall, on the ceiling or on the wall of the room. When the watering can is firmly attached, water pours out from above. It is optimal - depending on your desire - to wash partially or completely. A special mount with a non-rigid fixation of the watering can is suitable for both showering and partial water procedures. Taking the watering can in your hands, adjust the direction and height of the stream.
Shower hose material. Rubber and silicone last longer and are stronger on bends than metal hose.
Watering can throughput. Depends on the number of holes - the more, the stronger the pressure and splashes.

An interesting aspect is the choice of shower head from a medical point of view:

And lastly, a knowledgeable consultant in the store will select the mixer equipment to match the model of the shower cabin, the needs and capabilities of the buyer.

Additional functions

Pleasant trifles

radio that allows you to wash and listen last news simultaneously;
a TV, thanks to which you can also see a visual picture of the news;
a video player that makes it possible to play films or clips during water procedures.

Perhaps at one time having a radio or TV in the shower stall was considered especially chic, now wireless waterproof speakers with Wi-Fi control will help you relax.

Mass development since Soviet times, unfortunately, did not involve large areas for these premises. Conducting major repairs bathrooms, we very often have these small areas as initial data: 1, 2.2, 3 square meters. m. And the smaller the space, the more difficult it is to plan it correctly and reconcile our desires with our capabilities.

THERE ARE SEVERAL BASIC RULES IN THE CHOICE OF PLUMBING FIXTURES FOR MODERATE SIZED BATHROOMS:

if there is not enough space, it makes sense to choose a shower stall rather than a bathtub;
a cheap one without a tray and with thin walls will take up less space than a ready-made plastic shower stall;
it makes sense to consider shower stalls with folding partitions, which take up almost no space until you use them;
use corner models of furniture and plumbing fixtures (sinks, bathtubs, showers);
a toilet installed in the wall will take up less space and will appear visually lighter than a conventional model;
pay attention to combined models (combined showers or bathtubs with sinks, etc.), as they are much more compact;
If you decide to choose a bathtub, remember the variety of their models: corner asymmetrical shapes, sitting ones, etc.Perhaps your bathroom needs a non-standard option;
if there is not enough space, install a narrow washing machine with vertical loading, for two people its size will be quite enough.

The first thing you need to pay attention to when planning the bathroom space is the rules of ergonomics. After all, it is very important to place plumbing fixtures so that they are convenient to use.

For those who are planning to do renovations without a designer, I recommend paying attention to at least the main indicators:

the minimum distance from the edge of the toilet to the wall or to another plumbing fixture must be at least 20 cm, for convenient use bidet this distance is slightly larger - 25 cm
the free distance in front of the bathtub should be at least 75 cm by 90 cm and the same distance is recommended in front of the shower stall and if the shower tray is in the corner, then the width of the passage into it should be at least 70 cm
It is recommended to leave the functional distance in front of the washing machine 90 cm by 60 cm

If these rules are violated, the most frequent mistakes become

insufficient opening of doors, furniture storage drawers,
doors washing machine sticking out into the doorway furniture
inconvenient location of the toilet, bidet - too close to the wall.

The second thing to consider when planning a bathroom is that you can leave the center free and then the room will look more spacious. If a long and narrow room is allocated for a bathroom, then it should be divided into functional zones. Of course, the placement possibilities in the bathroom depend primarily on the location of the main communications, the height of the sewer riser exit, the material from which this is made sewer riser, and in each individual case, the possibility of positioning the toilet (moving, rotating), placing a water heated towel rail, the height of the shower tray, the location of the drain, I recommend agreeing with specialists
(With)

Any small bathroom requires proper organization space, especially when it comes to a combined bathroom. It performs several functions at once, and small area You need to place a lot of plumbing items and furniture. There are several techniques and secrets that will be useful to owners of small combined bathrooms.

Non-standard plumbing

The first thing that will save usable area in a small bathroom - plumbing non-standard forms and sizes. The ideal option is when you can use all the corners in the room. For example, put a toilet in one, install a sink in another, and place furniture and a shower stall or a small hip bath in the other corners. Fortunately, today plumbing manufacturers offer narrow sinks, corner toilets, sinks and bathtubs.

Glass partition and white walls

Even before repairs, you should think about color scheme rooms. For a small space, white, blue and light gray are ideal. It is better to decorate the walls in a small combined bathroom with glossy tiles, which reflect light and affect the visual expansion of the space.

Another trick is a glass partition separating the wet area. It does not visually eat up the area, prevents the spread of water to the rest of the bathroom area and zones the space.

Without shower

The shower stall, which is most often used in a combined bathroom, takes up a lot of precious space. This is why many people refuse it. Instead of a cabin, you can install a special tray and make a floor with a slight slope and simply pave it with tiles. This not only saves space, but also creates a more holistic interior picture. The main thing is to seal the floor and walls in the shower area well.

Spacious shower instead of a bath

You can sacrifice a bathroom and free space for a spacious shower. This option is ideal for large people or for lovers who like to shower as a couple. In this case, a glass partition will be useful. To visually make a room larger, it is recommended to use a large mirror.

Behind the curtain

A traditional alternative to a glass partition is a regular curtain. This element zones the room and prevents splashes from getting on furniture and towels. It is relevant in very small bathrooms, where glass partition impossible to install. It is better to choose a curtain of a neutral color so as not to overload an already small space.

Storage Niches

At the design stage, it’s a good idea to think through niches for storing things and various small items. Practice shows that they can be made in any typical bathroom. This can be an open niche where it is convenient to put towels or shampoos, or a closed vertical drawer that can be pulled out using wheels. You can hide anything there - all things will be securely hidden from moisture.

Combined “3 in one” option: mirror, hooks and towel shelf, Gentry Home

In an effort to expand usable space bathroom and modernize the decor, many prefer ergonomic designs for taking water procedures. The shower cubicle is practical and multifunctional device. It doesn't take up much space. To create a truly warm, relaxing and peaceful atmosphere, it is important to properly design a bathroom with a shower.

IN modern interiors bathroom - the photos clearly confirm this - more and more often you can see a shower stall instead of a traditional bathtub. This popularity is due to the significant advantages of this plumbing product. The shower cabin has more compact dimensions, which allows it to fit into even the most small room. This frees up enough space to accommodate a washing machine or furniture elements for storing various accessories. The shower cabin allows you to take a quick shower. This allows you to significantly reduce water consumption, which does not affect the effectiveness of water procedures.

Thanks to the presence of sealed doors, water does not splash around the room while taking a shower, and heat is retained inside the cabin. Modern models shower cabins are equipped with various functions, ranging from aromatherapy to hydromassage. A telephone and radio may also be located here. The trays have an anti-slip coating, which minimizes the risk of injury while showering. The depth of structures may vary.

Helpful advice! Deep shower trays can be used for bathing small children.

Thanks to the wide variety of design models, the shower stall easily fits into any interior of the room, while creating a unique atmosphere in the bathroom.

Despite a number of distinctive advantages, shower stalls have their drawbacks. During water procedures, you can stand or sit here, which may be uncomfortable for older people. The more additional functions a product has, the larger its dimensions will be. If there is low pressure in the water supply, you will not be able to use all the capabilities of the shower stall. In order for the structure to look aesthetically pleasing, its textured surface must be cleaned regularly, which is a more labor-intensive process than caring for a traditional bathtub.

How to choose a shower stall for a bathroom

Today, manufacturers produce a wide range of products that differ in type, size, shape, material and design. When choosing a specific model, it is important to take into account the features and dimensions of the room. When planning a small bathroom, you should give preference to a compact model that can be conveniently located in the corner. For spacious bathrooms, the shower stall can be of any shape and size, but the design should not unnecessarily overload the space.

Important! For convenient use of the shower stall, it is necessary to organize free access to it, without blocking the path with other devices.

The shape and size of the product are selected based on the installation location of the cabin, which depends on the layout of the premises, the varieties of which are shown in the photo of bathroom options. For a square-shaped room, preference should be given to corner models, which are conveniently located in the corner opposite front door. If the doorway is located in the central part of the wall, the booth should be in the far corner.

For rectangular rooms, designs of square, round and rectangular shapes are suitable. The booth can be located along the wall with the doorway or opposite it.

Bathroom design with an open shower

Showers open type equipped with side surfaces, but do not have rear panels or a base. Such structures are attached to the ceiling and walls of the bathroom. Built-in showers have glass doors, which are assembled in a profile made of stainless steel or aluminum and tightly attached to the walls.

Open-type cabins, also called shower enclosures, are economy class products. They have a basic set of capabilities. This is because the structure has no ceiling, and functions such as sauna or aromatherapy will be effective in closed space. Different designs of cabins can be seen in the photo of the design of a bathroom with a shower corner.

Installation of open-type models requires high-quality waterproofing and leveling of the floor, walls and ceiling. Such a shower stall is mounted exclusively in a niche or in a corner of the room. This model can also be installed directly on the bathroom floor. In this case, a concrete bowl is cast and finished with tiles with an anti-slip surface.

A corner shower takes up minimal space. The maximum height of the structures is 1.7 m, width - 0.9 m. Their installation is easy and labor-intensive, so there is no need to resort to the services of specialists. The products have an affordable price, which is acceptable for people with limited financial capabilities. The price of an open-type shower stall is in the range of 7-22 thousand rubles. The disadvantages of open-type booths include the following:

thorough installation of product elements;
labor-intensive repair engineering communications;
high level of humidity in the room;
inability to install an ozonation system and a steam generator.

Bathroom with a closed shower: design options

Fully autonomous plumbing unit in the form of a shower stall closed type consists of a tray, walls and ceiling, equipped with many additional functions. The tray has a depth of 3 to 45 cm. Most often it is made of acrylic or stainless steel. The supporting structure can be aluminum or stainless.

For the manufacture of side walls, transparent, translucent silicate glass or plexiglass. Monolithic polycarbonate is also used, which can take any shape. The doors open in a swing or sliding manner. The first option requires additional space. Variations of closed boxes can be seen in the photo of renovations of bathrooms with a shower.

This design has substantial dimensions, which requires much more free space than for open models. A closed shower stall can have different shapes, sizes and is made from a variety of materials. The design is easy to assemble and dismantle, which makes it possible to transport or remove the device when renovating the premises.

An indoor shower in an apartment has a number of advantages:

high level of soundproofing;
increased moisture insulation, which does not affect the indoor microclimate;
wide variety of designs;
easy and quick installation;
a wide range of additional functions.

The operation of the shower stall is controlled using an electronic regulator. By simply pressing a button, you can select the desired operating mode of the device. There are models equipped with mechanical control, which are cheaper. You can buy a shower box for 30-40 thousand rubles. There are exclusive designer models, the cost of which can reach up to 150 thousand rubles.

Additional features of closed showers

Closed shower cabins are equipped with the following functions:

horizontal hydromassage,
Turkish bath;
tropical shower;
chromotherapy;
aromatherapy;
contrast shower;
voice control;
ventilation.

Horizontal hydromassage is carried out using air bubbles and elastic jets of water, which lend themselves to the required intensity, and in a certain order. This procedure relaxes the body, improves blood circulation and metabolism, and helps in the fight against cellulite and excess weight. Hydromassage can be horizontal or vertical. The number of nozzles through which water is supplied determines the quality of the procedure. The more there are, the more effective the hydromassage will be.

The Turkish bath is organized thanks to a built-in steam generator, through which the enclosed space is filled with steam. Thus, it is created high humidity air at low water temperatures. This function can operate at a certain water pressure in the pipes. You can give the steam a different aroma by using aroma oil.

A rain shower is created through the operation of a special nozzle on the roof of the cabin, which, when turned on, allows the smallest droplets of water to disperse, creating the effect of rain. Chromotherapy is carried out thanks to LEDs built into the ceiling of the cabin different color that color the water. Subsequent color perception contributes to the health of the body. A contrast shower is performed by alternately supplying cold and hot water within a given temperature range.

Helpful advice! Availability of large quantity various functions in the shower stall requires electricity to be supplied to it. For reliable and durable operation, it is better to separate a separate cable line by grounding it.

Combination showers for bathrooms

Combination models combine a bathtub and a stall. This can be a full-fledged bathtub, which is closed with side walls. Depending on the constructive solution the booth can have a top cover or be installed without it. There are open and closed models. In the first version, the cabin is enclosed only by doors - without a ceiling. Closed models are a full-fledged shower box. There are combined bathtubs with shower curtains of different shapes.

Designs with a high tray (up to 40 cm) should be chosen by families with children. Small devices with a shower in the bathroom with a tray height of 10-15 cm, suitable for older people. For the rest of the category the best option the height is considered to be 20-30 cm. The combined type shower stall is equipped with all the functions of a closed flask and is complemented by a jacuzzi. Such products are installed in large rooms - with an area of at least 7-8 m². The average cost of these booths is 65 thousand rubles. An enclosed hydromassage box with a deep tray and a multifunctional shower cabin is very popular, the cost of which reaches 100 thousand rubles.

Related article:

Their purpose and advantages. A variety of models according to the type of opening. Technical and aesthetic characteristics. Criteria for correct selection.

Homemade shower cabin: design options

You can create a shower cabin with your own hands. In this case, there are three options:

buy a ready-made pallet and build enclosing elements;
make the pallet yourself, and purchase the doors and walls ready-made;
make the entire structure yourself.

The first two varieties are limited in the choice of size and design configuration, which is determined by factory standards. Last option provides the opportunity to realize any, even the most extraordinary, idea.

The first step is to create the base for the cabin. How to make a shower tray? To do this, enclose part of the floor using formwork or brickwork. The entire internal surface is reliably coated with waterproofing mastic. Next, installation is organized sewer pipe, then the ladder is set up.

Important! The drain should be positioned in such a way that after pouring the concrete and tiling the surface, it is flush with the finishing.

Concrete is poured with a slight slope towards the ladder. After the screed has completely set, the floor and sides of the pallet are finished with tiles.

Options for fencing homemade shower stalls in the bathroom

Enclosing structures can be made of any moisture-resistant building material. Wood can also be used, but it should be treated with a water-repellent compound.

The traditional solution is to create the walls of the structure from moisture-resistant plasterboard and then cover the surface with ceramic tiles. You can get a warm and bright space by building a shower from glass blocks. Laying is done quickly and allows you to create any shape of fence. An insert of decorative tiles imitating natural stone will help add originality to this design. It is advisable to use the same material for finishing the pallet.

You can get a shower without a cabin using waterproof fabric suspended on a chrome pipe and falling in flowing folds. In this case it is better to trim the pallet mosaic tiles. The ideal solution Polycarbonate is used to create the walls of the booth. This is durable, moisture resistant and decorative material framed with aluminum or plastic profile. Doors can be made pivoting or sliding. For the latter option, a guide profile is also used.

Get a shower stall unusual shape possible through cellular polycarbonate, which is clearly demonstrated by the photo of the shower stall design. Plexiglas is popular for shower enclosures. Since the material is fragile, it should be framed in a stainless steel profile.

A shower cabin made of tempered glass will look elegant and airy. This is an ideal option for small spaces. You can add aesthetics to the design using a harmonious combination of tiles, which are used to trim half the height of the booth, and tempered glass in the upper part of the fence.

Varieties of designs depending on the shape of the product

The shape of the shower stall, which determines its size and convenience of location, is determined by the modification of the tray. The most versatile option is the corner model, which can be installed in a room of any size. The pallet has a square shape or is made in the form of a quarter circle. This is the most compact type of construction, occupying a minimum of space, as shown in the photo of a shower stall in a Khrushchev-era building. A device located in the corner allows you to free up more space for installing a washing machine, bidet, washbasin or bathroom cabinet.

A rectangular shower stall is considered a classic. However, it takes up a lot of space. Such a cabin is most often installed along one of the walls. This solution not only turns out to be convenient, but also allows you to visually align the proportions of the room. A round shower stall, which can be located in a corner, in the center or near a wall, will look unusual. A design of this form is only suitable for large rooms, as is clearly shown in the photos of the most beautiful bathrooms.

Helpful advice! When choosing a round shower stall, you should give preference to glass models, which look the most impressive, creating the illusion of a waterfall.

The largest, but most unusual and interesting, is the pentagonal model. This design is most often installed in large combined bathrooms, where the cabin does not clutter the interior, providing free access to other elements of the room.

What are the sizes of symmetrical and asymmetrical shower cabins?

To ensure trouble-free operation of the device over a long period of time, it is important to choose the right size of the cabin. Undoubtedly, the larger the dimensions of the product, the more convenient it is to use. However, the model you like may simply not fit into the dimensions of the room.

The optimal size of the shower cabin for symmetrical models in width is 75, 80, 90 and 100 cm. Asymmetrical devices have dimensions of 80x120 and 80x180 cm. The standard height of the structure is 198 cm and 230 cm. However, it is possible to individual order, indicating specific dimensions. Square products have dimensions of 80x80 and 100x100 cm.

Models where the tray has the shape of a quarter circle with dimensions of 75x75 cm are ideal for small rooms. The diameter of round products varies from 75 to 100 cm. Combined shower cabins can have dimensions of more than 100 cm. The most comfortable option for taking a shower is considered to be a cabin with dimensions 90x90 cm. The height of the pallet can be 3-40 cm, and it is sometimes flush with the floor. In this case, it is important to ensure proper waterproofing.

Helpful advice! For bathrooms in an apartment, you should choose structures with a height of at least 20 cm to reduce the likelihood of flooding your neighbors.

Material for making a shower tray

The service life of the product depends on the type of material used to make the pallet. Also important are the parameters of sound and noise absorption. For safe use of the product, the coating should not be slippery.

The most popular are acrylic pallets. The material is able to retain heat for a long time, heating up in a matter of minutes. Acrylic pallets characterized by a non-slip coating and safety in operation. When water jets hit the surface, there is no unpleasant noise. Due to the fact that acrylic is easy to process, the product can be given any configuration by attaching additional elements. The surface is easy to clean, which allows it to remain aesthetic and presentable for a long time.

Helpful advice! Minor scratches and damage on the acrylic surface can be repaired using a special paste.

The disadvantages of the material include deformation that occurs due to permanent loads. This possibility can be eliminated by means of plates secured under the pallet.

A cast iron tray is more durable, reliable and durable. The material is able to retain heat for a long time, but takes time to heat up. A cast iron pallet, in comparison with other materials, is characterized by an affordable cost. Such products are distinguished by their large weight and identical shapes. Upon contact with water, a characteristic noise occurs. Over time, chips and cracks form on a product coated with enamel, as a result of which the surface needs restoration.

Steel pallets are stronger than acrylic and lighter than cast iron. The material retains heat well, but in some properties it is inferior to cast iron products. The surface of the pallet is slippery, so you should choose corrugated products or lay a rubber mat. Steel pallets are coated with enamel, the quality of which determines their durability. The products are inferior in sound insulation to cast iron.

Reliable, durable, with high degree Ceramic trays are sound-absorbing, undemanding in maintenance, and retain heat for a long time. Such products differ from others in their presentable appearance. However, the material is characterized by low resistance to damage, heavy weight and high cost.

The most durable pallets are made from natural stone. You can restore a damaged surface using grinder followed by polishing. The disadvantage is the high cost of the product. For a country house, you can choose a wooden pallet. The material is characterized by pleasant tactile sensations. In order for such a pallet to last for a long time, it is important to properly process the wood and ensure proper care of the product. Different versions of the tray can be seen in the photo of shower stalls in small and large bathrooms.

Doors and walls for shower stalls: suitable options

The protective elements of shower stalls are made of acrylic or impact-resistant glass. Acrylic doors and walls vary in color and degree of transparency. A decorative film with a pattern that matches the specific interior of the room can be applied to the surface. The material requires care. After each water procedure, you should immediately wipe the surface. Otherwise, there will be stains on it that cannot be eliminated over time, which will lead to clouding of the structure. You can buy an acrylic shower door in a 100 cm niche from 18 thousand rubles.

Glass surfaces are more hygienic and easy to clean. Fungus and mold do not form on them. Water quickly flows down the glass without lingering on it or leaving marks. The material does not become cloudy over time. Such surfaces are resistant to damage because they are made under the influence of high temperatures. Shower cabins made of glass look presentable and luxurious, giving the interior of the room a special cozy atmosphere. The greatest demand is for shower doors in the Cezares niche, which can be purchased from 15 thousand rubles.

Exist budget models shower stalls with enclosing elements made of plastic. The material is resistant to moisture and is lightweight, but requires maintenance and has a short service life. The surface is matte or transparent.

Doors in the cabin can be sliding, swinging, turning, folding, have two or four doors. The first option provides maximum tightness in the closed position and does not require free space for opening. Swing doors will require additional space that is not cluttered with various elements and accessories.

Helpful advice! If selected swing doors, and the inner bath area does not have free space, the doors can open into the cabin.

The walls of which are made of glass blocks will look original and stylish.

For limited space ideal option are rotating structures that open using a hinge moving along a special guide. These doors move easily and smoothly. The folding type, or book door, turns into a compact accordion and opens into the cabin. It is often used in conjunction with sliding doors. In the photo of small bathrooms with a shower you can see different variations of enclosing structures.

Optimal bathroom layout with shower

To create a cozy and comfortable room, it is important to properly organize the space, arranging all its elements taking into account their sizes. For this purpose, a bathroom plan is drawn up. In addition to the shower stall, the room should include a washbasin, a washing machine, a mirror with a cabinet and a toilet (in the case of a combined bathroom).

Important! All doors must open without obstruction, and a free space of at least 40 cm wide must be provided for passage.

For small apartments Often they have a combined bathroom with a shower. The structure usually occupies an area of at least 1 m². You can further save space by installing a wall-mounted sink and toilet. It is recommended to organize a cabinet under the washbasin for various bath accessories.

There are various options for planning a small bathroom. In a square room, the shower stall is located in the corner. A washbasin is installed nearby. A toilet is placed opposite the cubicle, if possible covered by a partition. IN rectangular rooms the booth can be installed along one wide wall, opposite which there is a toilet and sink. In narrow rooms, plumbing fixtures should be located along one of the long walls.

Preparing the premises and installing utilities

After the layout of the room has been drawn up, you can begin to dismantle bathroom items and prepare its elements, while removing old Decoration Materials. The price of renovating a bathroom with a shower will be determined by the dimensions of the room, volume dismantling works and the complexity of surface finishing.

Important! In the case of combining a bathtub and a toilet, the demolition of the partition must be agreed upon with the regulatory authorities.

The next stage is the installation of the necessary utilities for new plumbing equipment. Tap water. For this purpose, grooves are made where communications are laid. This solution will save space. The sewer and water risers, located in the corner of the room, can be hidden in a plasterboard box. If they are placed in the central part of the wall, then you can disguise them behind plasterboard wall with an elegant shutter door.

Special attention You should pay attention to the option of connecting the shower to the sewer. For pallets with a low drain pipe, you will either have to bury the waste pipe into the floor or raise the booth to a certain height. You can lift the pallet using special adjustable legs or mount a brick pedestal under it.

An important undertaking is the installation of new electrical wiring. The cable, enclosed in a corrugated pipe, is hidden in the wall. For the bathroom, you should purchase sockets with increased moisture resistance. After all communications have been laid, the grooves are filled with cement-sand or gypsum mixture.

Important preparatory event is waterproofing all surfaces of the room. Particular attention is paid to the places where the pipes pass. Joints between walls and floors must be covered special composition to a height of 12-15 cm. In places where plumbing fixtures are installed, a special sealing tape is glued above the level of the connection points. The entire floor surface is covered with a waterproofing compound.

Helpful advice! When emergency situation To eliminate the possibility of water leakage outside the bathroom, it is recommended to equip the door with a threshold and waterproof it.

Wall cladding when creating a bathroom design with a shower

Ceramic tiles are mainly used to decorate the walls of a room with a shower stall. The material is characterized by increased resistance to moisture and aggressive influences. detergents. In addition, it is environmentally friendly, practical and wear-resistant. Today, shower tiles are presented in a wide range of color variations and a variety of designs, which makes it possible to choose the material to suit any interior style.

The tiles can be plain, with ornaments, patterns, stained glass, imitation wood, stone and mosaics. It has a matte or glossy surface. There are products coated with mother-of-pearl. The shape of the tiles is rectangular, round, square, octagonal and semicircular. Different options for using products can be seen in the photo of the interior of a bathroom with a shower.

The tiles are laid different ways, thanks to which you can visually adjust the shape of the room. You can visually stretch the walls using vertical masonry. The horizontal method of mounting elements will help to lengthen the room. Diagonal masonry looks unusual and original. However, in this case, high material consumption should be taken into account. Interesting experiments in tiling can be seen in the photo of tiled showers.

Important! Before installing ceramic tiles, the surface must be leveled.

You can decorate the walls of the bath water-based paint any color or use several shades that can be combined with each other. This is the cheapest finishing option, but it requires a perfectly flat base. In the photo of the bathroom small size can be clearly seen this type registration

Another budget, but more interesting option is the cladding of the room plastic panels. The material is resistant to moisture, but is subject to mechanical stress. Among the presented product samples, you can choose plain, colored panels, products with patterns and imitation of stone and wood.

Helpful advice! To create a reliable and durable coating, the panels should be tightly connected to each other and the joints should be thoroughly sealed.

Options for flooring in a bathroom with a shower

To finish the floor in the bathroom you can use ceramic tiles. This is especially true for shower stalls with low sides. However, for safe operation of the premises, it must have a protective anti-slip coating.

Helpful advice! To create additional comfort in the bathroom, you can install a heated floor under ceramic tiles.

The floor in a small bathroom with a shower stall (photos of the room design clearly show this) can be covered with moisture-resistant laminate. This coating should be used for closed type booths with high pallet sides. Laminate is a relatively warm material, which creates additional comfort after getting out of the shower. The disadvantage of the material is its fragility. However, with proper use and care, the coating can last for many years.

Helpful advice! After installation, it is recommended to treat the laminate with a moisture-resistant impregnation.

Today, more and more often, self-leveling polymer or epoxy flooring is chosen to finish the bathroom floor. This coating can be used for shower stalls of any type with different tray heights. The floor performs two functions simultaneously: waterproofing and decorative. The main disadvantages are the high cost of the material and the need to attract a specialist to install it.

Another expensive but respectable coating is porcelain stoneware. This is a strong, durable material that is resistant to mechanical stress and can withstand any load. He can be various colors and imitations. The most popular is marbled porcelain tile. Such a surface will look luxurious, as is clearly shown in the photo of the design of a bathroom with a shower.

Bathroom ceiling finishing material

The ceiling in the bathroom can be finished with various materials: plastic panels, tiles, paint. The last option is the cheapest, but you should know that the surface must be perfectly flat before applying paint. For the bathroom, it is recommended to use paint based on silicate, silicone or latex based. A plain painted ceiling can become the basis for applying a color gradient or an original pattern, making the room exclusive and unique. Interesting design ideas are presented in the photo of the interior of a bathroom with a shower.

PVC panels can be attached directly to the ceiling or frame wooden sheathing. It is advisable to use them when uneven surface. The result is an even coating. The material is available in a wide variety of colors and patterns. You can choose samples with imitation of ceramic tiles, wood texture, natural stone structure, metal surface. Clearly different variants The interior of the room is shown in the photo of the design of a small bathroom with a shower in Khrushchev.

Stretch ceilings are very popular today. After installation there will be no seams left on the ceiling. The main advantage of the design is its ability to withstand up to 100 kg of weight. Such a ceiling will hide all surface imperfections and imperfections, and will also prevent the consequences of flooding by neighbors above. Another advantage of this solution is the additional insulation of the room. Today you can choose any ceiling color that will fit into the chosen design. Original solutions shown in the photo of the bathroom design.

Design of a small bathroom with shower

When organizing the space of small rooms, it is important to take into account every centimeter of free space. For such rooms, the most preferable option is shower enclosures with sliding doors, which allows you to use one corner, freeing up space for other interior elements. This zoning of space is shown in the photo of the design of a small bathroom of 4 square meters. m with shower and washing machine.

The presence of a niche will allow you to equip a built-in shower with sliding doors. With this option, it is important to properly organize the supply of all utilities to the product. If there is a shortage of space, the walls of the shower stall can be used to place clothes hangers or mini-shelves.

For cramped spaces, preference should be given to transparent booth options or those painted in light colors. Partitions made of corrugated, tinted glass or plexiglass with a discreet pattern will look elegant and original. The pallet should have an average depth so as not to overload the interior. It is recommended to decorate the room in a light color palette.

Glossy or semi-gloss ceramic tiles with reflective elements will look harmonious. Large drawings should not be used. The most harmonious look is a shower made of mosaics or traditional tiles with geometric patterns in a vertical orientation. You can add contrast by having a dark floor and choosing bright interior accessories. These could be colored rugs on the floor, towels or curtains with a pattern.

Helpful advice! When decorating small bathrooms, it is not recommended to use more than three colors so as not to overly overload the space.

When decorating a bathroom with plastic panels, you should give preference to elements of blue, blue or aquamarine shades, which will add depth to the room.

A prerequisite for small bathrooms is the presence of mirrors that can visually expand the area. The maximum effect can be achieved by making a mirror ceiling. In order for the structure to completely “dissolve” in the room, it must have transparent, profileless surfaces floating in the air. Frosted glass surfaces, which can be used to decorate one of the bathroom walls, will help fill the room with light, as is clearly shown in the photo of bathroom options.

Large bathroom with shower: design options

When creating a beautiful bathroom interior big size you don’t have to sacrifice the necessary elements of the room to install a multifunctional booth. Quite often the structure is placed in a corner to ensure the best ergonomics. Zonal division of space creates a number of additional opportunities, at the same time making the room cozy and comfortable, eliminating the feeling of cluttering things. You can delimit the territory for water procedures, bathrooms, and storage systems for accessories.

The interior of a bathroom with a round shower installed in the center of the room will look original and unusual. A special color will be created by a transparent glass multifunctional design, which is equipped with multi-colored lighting.

Along one of the walls you can place a combined stall with shower sliding door into a 120 cm niche, with an additional Jacuzzi. Along the perimeter of the room you can place floor cabinets or cabinets.

For a spacious room there are no color restrictions. Here you can safely choose dark gray, chocolate, rich burgundy surfaces, which must be diluted with light splashes or mosaics. Indoor flowers will help to breathe natural aroma into the atmosphere of a spacious room, as evidenced by the photo of the design of a bathroom with a shower.

Color design for a bathroom with shower

The chosen color palette plays a significant role when decorating a room. This is especially important for small rooms. When designing a small bathroom, you should use only light colors. pastel shades, which are diluted with bright accessories. A room made in white, cream or milky color will seem airy and weightless. You can add clarity to the lines of the room using chrome elements plumbing and fittings.

A good solution for a small space would also be all shades of blue, purple, peach, pearl, silver, pink, lavender and blue. It is recommended to decorate monochromatic surfaces with decorative inserts with ornaments or designs. In a bright design, you can decorate one of the walls of the room, which is clearly shown in the photo of the design of a combined bathroom with a shower.

Terracotta colors will help create a warm, relaxing atmosphere in the room. You can dilute the sparkling red color with the help of white borders, ceilings and other interior elements.

Helpful advice! To prevent the room from looking dull and gloomy, it is important to take care of intense lighting.

Rooms decorated in the contrast of purple and yellow, red and white, yellow and blue, red and gray colors, which is clearly shown in the photo of the design of small bathrooms with a shower.

For spacious rooms, you can safely use black. It will look especially stylish in marble. Dark colors may be present in large ornaments on the walls, patterns on floor covering or in the edging. It is easy to get a spectacular, catchy and bright bathroom by using a red palette. A calming and relaxing environment will be created by frosted glass surfaces of the shower stall and snow-white sanitary fixtures. You can avoid excessive aggressiveness by using a lot of light.

A small bathroom with a shower in a yellow or orange palette, complemented by glass or mirror surfaces, looks cheerful and sunny. To make the room shimmer with bright colors, it is important to organize intense warm lighting.

Bathroom design with shower: photos of rooms in different styles

The interior style of a bathroom with a shower will determine the atmosphere in the room, which can be calm and light or bright and dynamic. Since the shower stall is a fresh flow, the interior should be designed in modern directions. It is much more difficult to create a classic design in such a situation.

For a small room, the most suitable options are hi-tech, Japanese style or minimalism. High-tech requires a large number of mirror and glass surfaces, a minimum of interior elements and accessories. The Japanese style is characterized by the use of natural materials when decorating the room. The room should be decorated in a neutral palette. It is recommended to dilute the interior of the shower with the help of sakura branches or hieroglyphs.

You can embody the minimalism trend using black and white colors in the decoration of the room. The room should not be overloaded with decorative elements and unnecessary furniture. Smooth ones should prevail here glossy surfaces. The shower stall is made of plastic or glass and has a simple outline.

For adherents of naturalism, the eco style is suitable. In the decoration of premises they are used exclusively natural materials such as wood and stone. A light, calm natural range of colors should dissolve in abundant warm lighting. You can clearly see the different design options in the photo of a small bathroom design.

IN small room it will also look organic sea style. White and blue surfaces are used here, decorative elements, reminiscent of the sea, transparent doors and flowing curtains.

For spacious rooms, the loft and Provence directions are suitable. Get space for creative ideas The first option will help. In this case, it is recommended to reunite rough surface finishes with stylish interior accessories and art objects. The premises are decorated in gray, blue, beige colors with a metallic tint. Characteristic is the use of concrete surfaces and brickwork. For such a design, antique, rare inserts that are reminiscent of the last century would be appropriate. Unusual bathroom design options are clearly demonstrated in the photo.

Provence style will help fill the room with air, freshness and floral aroma. The design is characterized by the use of natural shades found in nature: white, vanilla, lavender, yellow, turquoise, olive. The highlight of the room will be splashes of faded colors and artificially aged surfaces. All the naturalness of the style can be seen in the photo beautiful interiors bathrooms.

The shower stall is necessary element in modern bathrooms. This is not only a multifunctional design, thanks to which you can recreate in own home a spa room, but also a stylish element of the interior. The modern assortment includes models different sizes, shapes and design, which makes it possible to select a product that meets all the stated requirements. A properly designed interior of the room will help to recreate a warm, cozy, peaceful atmosphere, which will help you relax and tune into a positive mood after a hard day at work.

Bathrooms equipped with shower cabins have become increasingly popular lately.

It doesn’t matter so much whether you live in a private house or an apartment - you can install and stylishly decorate a shower in almost any room. The only difference is the size of the bathroom.

With private houses everything is simple - spacious room allows you to implement many design ideas, correctly arrange equipment and accessories.

Apartments in multi-storey buildings, as a rule, have bathrooms small size— You don’t see a separate bathroom there very often.

But what should owners of small apartments do who want to decorate a bathroom with a shower in accordance with the latest fashion trends? You will learn the answer to this question from this article.

Shower stall for the bathroom – choose the right one!

While preparing the room for installing a shower stall in the bathroom, you have probably already looked at several interesting models.

However, there is no need to rush into purchasing - a hastily purchased cubicle may simply not be the right size for your bathroom. Therefore, you should first take measurements of the place where you plan to install it, accurate to the millimeter.

The next step is to choose a shower stall for the bathroom. They come in different colors, shapes, materials from which the frame and pallet are made - this is all very important points, which cannot be ignored.

Not only the appearance of the entire bathroom, but also the amount of money spent depends on the selected characteristics. We will look at two main types of structures:

Open showers. This design consists only of a pallet and side walls. The cabin is not equipped with any special functions– they are simply not needed here. This is the most common shower enclosure, fixed to the wall with the front walls.

Enclosed showers. This design is more advanced, has a deep tray and roof, and is protected on all sides by walls. Often, such boxes are multifunctional and can have a rectangular, round or triangular shape.

Compact and stylish design options for a bathtub with a shower stall

In conditions of limited space, all objects and elements used should be as compact and mobile as possible.

Take a few ideas for optimal placement of a shower stall in a small bathroom:

Combined bathroom, equipped with minimal space. Typically, such a small area of the room is allocated only for the bathroom.

However, if you approach the issue professionally, even a small room will fit everything you need. To achieve this result, you should choose the simplest possible shower stall, without additional parts or specific functions.

The tray should be shallow and the walls transparent. Otherwise, the space may feel crowded. A mirror placed opposite the booth will benefit a small space - making it visually wider.

Expanding the space by properly combining the toilet and bathroom. Most effective method increase the space - make one room out of two. The wall that previously divided the bathroom will become an excellent partition in the newly formed room, if it is not completely demolished.

When decorating such a bathroom, I often use warm color scheme. To add originality to the interior, you can use several shades of the same color.

You can install a very ordinary shower cabin - maximizing the free space in such a room is much more important than the additional functions of the cabin. Give preference to smooth transitions and rounded shapes - this will significantly soften the interior.

Bathroom in light cool colors. Such a room may not seem very attractive at first glance, but even it has its own zest and design idea.

Finishing walls, floors and ceilings in grey, white and beige tones- a sign of a strict and official style. In such a bathroom you will not find home comfort, but it shouldn't be here.

Such an interior speaks of the neatness and efficiency of the owner of the house. One of the undoubted advantages of this design option is the ability to select and install a large shower stall, which has a number of additional functions.

Shower stall in the interior of a Khrushchev-type bathroom. The room reserved for the bathroom in old Khrushchev apartments is not large in size, but even it can be optimized and decorated, taking into account the wishes of the owners.

The shower stall in such a room will occupy most of the space. Therefore, you should choose light colors for decoration and decoration - they will visually increase the size of the bathroom and it will not seem too cluttered. Semicircular frosted shower doors will cover part of the wall, making the room seem larger.

Small but stylish bathroom with shower. It probably seems to you that the small dimensions of the room will not allow you to implement the design you like. modern design bathroom with shower? Remember - proper zoning of space simply works wonders!

A shower stall located in the corner will not take up much space, which means that the remaining area can be used to place a bedside table, towel holders, and even to install a washing machine.

To decorate the walls, you can use ceramic tiles in two contrasting shades. This technique will certainly attract the eye and become a unique highlight of the interior.

How can a shower cabin surprise us?

Enclosed shower enclosures almost always come with several additional features. Among them are:

Backlighting (creates an intimate atmosphere, allowing you not to use the main lighting in the bathroom, can have a chromotherapy effect);
Aromatherapy (the cabin is filled with your favorite aromas);
Heavy rain (through special nozzle water jets of incredible power pass through);
Contrast shower (frequent changes in temperature energize and have a positive effect on work activity);
Bathhouse (humidity in the cabin rises to a maximum, and the temperature ranges from 40 to 60 degrees)

As you can see, if you take a professional approach to creating the interior of a bathroom, it will accommodate not only a shower stall, but also many other important little things.

Your favorite modern shower design will last longer if you take the time to properly prepare the room and think through all the details in advance.

By listening to our advice, you will get a comfortable and incredibly stylish room where you can soak in a hot bath and enjoy an invigorating shower.

Photo of a bathroom with a shower stall

Content:

When designing a bathroom, many people have to choose between a bathtub and a shower. If you're lucky with square meters, you can install a bathtub, a shower cabin, and even a combined option, but residents of small apartments have to give preference to one thing. A small bathroom with a shower is a great option.

Advantages of a shower cabin:

Space saving. A shower cabin will allow you to at least double the usable area. There will be space for a washing machine, a basket with dirty laundry, additional shelves or a closet.
Cost savings. By taking a shower rather than a bath, you'll waste less water by approximately one third, therefore, the cost of paying for utilities will be reduced.
Ergonomics. Today, shower cabins, in addition to their direct functions, have a whole range of additional ones, such as contrast showers or hydromassage.
Aesthetics. The bathroom will be transformed and take on a modern look. Today, bathroom design with a shower has reached a new level.

How to properly place a shower stall?

There are a number of options:

Wall-mounted. The cabin is located along the entire length of the wall;
Free. The location is determined by the desire of the apartment owner;
Angular. This is the most reasonable option in terms of space saving and ergonomics. A small bathroom with a shower does not give many options to choose from.

Dimensions and dimensions

The range of stores is as wide as possible. There are both simple shower cabins, consisting of a tray and one door, and options with additional functions. The most popular sizes are 70x70 cm, 80x80 cm and 90x90 cm.

Regardless of the size, you should follow the rules for arranging a small bathroom with a shower:

The gap from the washbasin or toilet to the cabin is at least 30 cm;
Unoccupied space in front of the shower - from 80 cm, so that you can undress and dress;
If the cabin and the bathroom door are located on the same wall, the distance between them should be at least 15 cm.

If these conditions are met, the design of a bathroom with a shower will look organic.

Should I buy a ready-made version or assemble it myself?

Sometimes assembling a shower stall with your own hands for a small bathroom, purchasing everything you need separately in a specialized store, is the only right solution. In addition, this option will cost less. Monoblocks good quality They are not cheap, and there is no point in purchasing a budget Chinese version that will not last long.

Design of a pink and gray bathroom with a wall-mounted shower stall. Photo Gray-pink bathroom design Pink bathroom door

If you have money but no time, then the best solution Your bathroom will have a ready-made shower cabin with hydromassage. This shower cabin looks no worse.

Can save on buying a pallet and make it yourself, using the same ceramic tiles from which the floor is made. This technique visually expands a small space. You can create your own bathroom design with a shower.

We take into account the features of the layout

Square. The shower should be installed in the corner opposite the entrance. If the doorway is in the middle, then installation is desirable in the far corner diagonally.

Rectangular. If the bathroom is wide and the door is in the middle of the long side, then the shower is placed in the corner part, on the wall where the door is located. In a narrow room it is recommended to install on short wall from the side of the door. Even a small bathroom with a shower can create an aesthetic and functional space.

Which shower cabin shape should you choose?

When the bathroom area is only a few meters, you can save space by correct form shower cabin.
If you decide to place the shower in a corner, buy a corner model with a quarter-circle shaped tray. This is the most reasonable option in terms of proper use of space.

The design of a bathroom with a square or rectangular shower cabin is possible if there is enough space for communications.