A clogged sewer pipe is a plug made up of particles of grease, dirt, and foreign objects (large or small) that prevents free drainage. In many cases, you can clean the sewer yourself, but to do this you need to know how and what products are best to use. Action should be taken in direct proportion to the cause and location of the sewer blockage.
Classifying sewer blockages according to the type of their occurrence helps determine the cleaning method.
Obstruction of the drainage system rarely occurs suddenly. More often, this is a gradual overgrowing of communications with fat and small debris, which decomposes, releasing a specific odor. A sign of a blockage is difficult drainage, when water comes out with difficulty. An unfavorable symptom of clogging is an unpleasant odor.
All blockages can be divided into the following types:
- Operational in a pipe. Most common type of blockage drain pipe, the cause of which is suspended particles of debris (food debris, hair, household dust, sand) and fat, which inevitably end up in wastewater.
- Operational in siphon. It is formed when the siphon of a bathroom or sink becomes clogged with small debris.
- Mechanical. It forms suddenly when a large object gets into the drain pipe, or it grows gradually, for example, when toilet paper is flushed down the toilet.
- Technogenic. There is an error in the design or installation of the drainage system. A sign that clogged pipes are due to their incorrect location are constantly appearing plugs.
How to determine the location of the blockage
All blockages can be divided according to the place of their formation:
- to the central ones - arising in a common riser;
- to local ones - those that arose in a separate apartment.
If a blockage has formed in the pipes that are located between the plumbing fixtures and the central sewer riser, then such a blockage, as a rule, can be eliminated quite quickly on your own, without resorting to the help of plumbers.
If the central drain is clogged, then you can’t handle it on your own, and you need to call the housing office.
Signs of a clogged central pipe: water in the apartment will not drain from any plumbing fixture. The worst option is when the drain water does not just stand there, but begins to rise in the sink, bathtub or toilet. This is especially typical for apartments located on the first floors of apartment buildings.
Note! If water does not drain in a particular sink (bathtub, toilet), and other plumbing fixtures are working normally, then the blockage is local in nature, and it is usually easy to fix it yourself.
Cleaning methods
All pipe cleaning methods can be divided into mechanical and chemical.
Sewerage, just like other plumbing systems, sometimes tends to present “surprises” to its owners. This time we will talk about the causes of blockages. sewer systems, About, how to clean a sewer pipe , methods of dealing with blockages and methods that will help avoid problems in the future.
There are several how objective reasons, and those that depend on correct operation sewerage systems. First of all, it is worth noting reasons beyond the control of the owners:
- the material of the pipes from which the drainage system is made. Usually, cast iron pipes are most susceptible to blockages. This is due to the rough inner surface of cast iron pipes. First, they retain dirt and grease on their walls, and then the blockage begins to grow like a snowball.
- improperly installed sewer system, with large turning angles and incorrectly calculated hydrodynamic characteristics and slopes - second no less common reason blockages
- in private houses, a shallowly laid drain pipe may freeze during the cold season or move under the influence of soil pressure.
No less often, the cause of blockage is poor culture when using sewerage. Food particles, garbage, rags - all this can quickly damage any drainage system. If you do not want to frequently deal with the unpleasant procedure of cleaning drain pipes, teach your family how to use the drain system correctly.
Pipe material has a direct impact on the frequency of blockages.
Methods for cleaning sewer pipes
Before deciding on a method for removing debris from a drain pipe, you need to find out where the blockage occurred. To do this, you need to check the entire drain, starting from the drain hole of the installed equipment. The most frequently clogged areas are:
- kitchen sink drain;
- sewer section from kitchen to bathroom;
- toilet flush;
- the area where the toilet pipes and the sewer riser are connected.
All sewer cleaning methods can be divided into mechanical methods, thermal and chemical methods cleaning, as well as hydrodynamic drain cleaning. When choosing a cleaning method, be guided by the severity of the blockage, the location of the contamination, and the material of the pipes from which your drain system is made.
Plastic pipes clog less often, however, when they become clogged with dirt, it is not always possible to use everything available methods cleaning. Yes, some types plastic pipes do not allow increased heating during thermal cleaning. Others, thin-walled, are afraid of cleaning with metal devices. The most a good decision The problem with this type of drainage is the use of chemical treatment methods.
The simplest tools for cleaning drains in the kitchen and bathroom
Learning to clean sewers using mechanical methods
If we are dealing with a fairly shallow blockage, we can use a plunger or a brush. In this case, the bowl of the plunger should cover the drain hole with a margin. To carry out work using a plunger, it is necessary that the water layer be at least 3 centimeters. It is necessary to place the sole of the device on the drain and release the air from under it. The plunger should be pressed sharply, but not very often, waiting until its shape is completely restored. The water pressure under the bowl of the plunger lifts layers of grease and dirt from the walls of the pipes, thus cleaning them. After removing the contamination, rinse the drain with hot water.
Plumbing cable
For deeper blockages use plumbing cable or long wire. A large number of cables for cleaning sewers, short and longer, are produced. The most top scores you would expect from a plumbing cable with a brush at the end. In order to properly clean the clogged area, the edge of the cable is passed into the pipe. Pushing the cable deep with one hand, use the other to rotate it. Rotation will allow the cable to pass through bends and contaminated areas. When pushing the plumbing cable with great force, rotate it only clockwise, otherwise the wire turns will begin to unwind and the cable will become unusable.
Tip: when passing bends inside pipes, rotate the cable in the direction of the turn, i.e. if the pipe turns to the right, you need to rotate the device clockwise, and if it turns to the left, vice versa.
When pushing the cable deep into the pipe, do not forget to add hot water there. This will further soften debris deposits and facilitate the sliding of the device. After cleaning, open the water and, while pulling the cable, rotate it the opposite side, wiping with a rag as needed. After use, wash the device with warm water and detergent and dry thoroughly.
Chemistry in the fight against sewer blockages
For chemical cleaning of the inner surface of pipes, it has been developed great amount chemicals. These are all kinds of powders, gels, granules, liquids, etc. To use these drugs, you should use the instructions for their use. In some cases, it is enough to pour the product into the clogged pipe, in others it must be diluted in a certain amount hot water. Then the drain is washed generously with plenty of water.
When using chemicals, you must remember to take precautions, wear gloves and avoid contact of toxic substances with open areas skin and eyes.
Important: never mix chemicals, which contain alkali and acidic substances. Follow the manufacturers' recommendations.
Thermal method and other folk methods
The method of removing blockages using boiling water is one of the simplest, however, very effective in the fight against fatty deposits. It consists of gradually pouring boiling water into the sink drain hole. When the boiling water begins to dissipate, add an even larger volume of hot liquid. This will help warm up the fatty deposits well and remove them from the walls of the pipes. In this case, you can use a plunger, which will create the necessary pressure.
Attention: when using boiling water as a means of clearing a blockage, make sure that the pipes from which your drain system is made are heat resistant. Remember that some types of plastic can be damaged high temperature.
Before flushing the wastewater system with boiling water, you can use another traditional method. To do this, you need to dissolve one pack of soda in a liter of warm water and pour it into the sink. Then add 100 ml of vinegar there. Inside the blockage there will be a reaction with the release of large quantity foam. This chemical reaction is good at corroding greasy deposits on pipe walls. After all the soda has been “quenched” by the acid, additionally pour boiling water over the drain. This will most likely return your drain system to full functionality.
Hydrodynamic cleaning of the sewerage system
Hydrodynamic methods for removing blockages from sewer systems are the most effective, but they are impossible to carry out without special equipment. All methods of this type are based on the supply of water under high pressure to the site of the blockage. Professional equipment public utilities is based precisely on this principle.
For home use good equipment released German company"Kärcher". This manufacturer’s installation is equipped with a long hose that is inserted into the pipe. Water is supplied through the hose under pressure of up to 150 atmospheres. Under the influence of such a powerful water flow, particles of debris are gradually washed out and the cork is destroyed.
To insert the sleeve you don’t even need to make a significant effort; it easily fits into the pipe due to the reverse outflow of water.
This system includes additional nozzles that combine the hydrodynamic cleaning method with the mechanical one. The cost of equipment of this type is quite high, however, if you periodically use it for preventive purposes, then you can confidently say that the system will never become clogged.
In order for the sewerage system to work without failures and never be bothered by problems, it is necessary to adhere to the simplest rules when operating it.
First, make sure that there are fine meshes on the drain holes of sinks and sinks for mechanical filtration of drained water. Second, do not throw greasy waste, food scraps, rags, or other debris down the drain. That's what the trash can is for. Try to make it a rule to rinse the drains of sinks and sinks with boiling water while cleaning. Use special ones at least a couple of times a season chemical methods cleaning to prevent future blockages.
Analysis is a necessary thing in our time, it is an irreplaceable part of the life of every family and every person. The sewage system is used so intensively and often without observing basic operating rules that in many cases it sooner or later breaks down. Such stories happen primarily with sewer pipes, and most often it is a clogged pipe. It is best when this issue is resolved by a qualified specialist, but if such a solution is not suitable for some reason, then you can clean the pipes yourself.
Clearing the blockage
To eliminate this problem, you need to thoroughly clean the blockage and completely flush the drain. For this purpose, technological and chemical means are used. Thus, repairs are carried out much faster and in compliance with all hygienic standards. This problem is quite easy to prevent; you just need to prevent blockages from time to time. This is called routine drain cleaning. This is much more convenient and safer than solving an existing blockage problem.
Also, by performing preventative cleaning, you can not only avoid problems with mechanical problems, but also eliminate bad odors from sewer pipes. Many enterprises or individuals offer their services in the field of sewer installation and cleaning of structures, washing of channels, pipes, and can remove dirt and grease deposits. This is much better than an inexperienced person climbing into the sewer himself.
The sewer gets clogged often and quite unexpectedly
The sewer gets clogged often and quite unexpectedly. Sewer cleaning can take a different period of time, since the blockage can also be different, mostly they can be minor or deep. Very often, the problem of blockage can be solved by superficial cleaning of the sump or pipe. You can do this yourself if you have experience in such matters, having repeatedly encountered them in everyday life. For an experienced specialist, this problem is insignificant; he can deal with it quickly and efficiently.
Sometimes, in order to clear clogged pipes, you need to partially disassemble them, which can cause some difficulties. This is a dirty and unpleasant job, but this problem needs to be solved in shortest time, since blockages cause not only problems in the area of water drainage, but also because of this, pipes subsequently collapse, colonies of bacteria multiply, and unpleasant odors in the house and insects in the house.
You can also clean the sewer channels by simply thermally– flush the drain with boiling water. It is effective against fresh fat deposits - this type of contamination can simply dissolve when it comes into contact with high temperatures. If your sewer system consists of cast iron pipes, you need to use at least 10 liters of boiling water, since cast iron pipes absorb heat, cooling the water.
Chemical cleaning of pipes is only possible if a small amount of debris is deposited, since in other cases it is ineffective and even harmful. This method is best used to prevent blockage. Most often, these means are special powders and liquids; when the case is particularly complex, hydrochloric acid is used. But you should not use acid if you have old cast iron pipes - it can corrode the walls of the pipes, and then you will get a new, much more unpleasant problem.
The mechanical method of cleaning a sewer pipe is considered the most effective, since it is quite possible to do it with my own hands. To do this you need a plunger or a flexible cable. A manual or mechanical plunger creates a vacuum in the system, thus, it can “stir up” debris deposits, and they will calmly pass without creating congestion. If the plunger does not solve the problem, you can try the option with a flexible cable. You just need a few people to push the cable into the pipe and thus, by rotating the cable in different directions, break through the blockage. To avoid cutting your hands with the cable, you need to wear gloves on them, or make handles at the ends of the cables. These are the simplest options that you can apply yourself.
The plumber is knowledgeable about the design of sewer systems
Do not forget that a plumber is best informed about the design of sewer systems. He can solve a blockage of any complexity, since this problem happens very often. A professional plumber will fix the problem efficiently and guarantee you no further leaks or pipe breaks. Cleaning the pipe on your own can cause a number of problems, since an ordinary person who does not understand these matters will not be able to determine whether it is necessary to replace some rubber gaskets and seals, as well as assess the corrosion and wear of the pipes, thus, it can bring the situation to a critical limit .
Problems with clogs
Small blockages can provoke further global problems with sewerage. The first sign of a blockage may be problems with water drainage from the toilet or sink. Therefore, if you clear the blockage from the pipe in a timely manner, you don’t have to worry about further major blockages in the sewer, as well as flooding of the house or other premises. Thus, cleaning sewer pipes from small blockages is a household necessity, along with spring cleaning or repair.
Probably, many in their lives have encountered such an economic necessity as cleaning sewer pipes. The main reason why blockages form in pipes is the accumulation of household waste: hair, soap, grease, etc. There are simple ways self-cleaning of sewer pipes using basic tools and available materials. At the right approach You can remove blockages with your own hands, without seeking the help of qualified plumbers. How to do this, read our article.
How to properly remove blockages
Use of household products
To self cleaning sewer pipes was effective and fruitful, you need to act in this sequence ( recipe No. 1):
- Clear the drain hole of accumulated debris. You can pour 1 liter of boiling water into it and leave for 15 minutes.
- Apply the plunger.
- Pour 1 cup of soda into the drain hole and fill it with boiling water in a 1:3 ratio.
The described procedure can be repeated several times if necessary. Baking soda creates an alkaline environment in sewer pipes, making it easier to remove blockages. It will not only clean the inside of the pipes, but also disinfect the pipes and sink.
You can use another method of dealing with blockages ( recipe No. 2):
- Pour baking soda into the pipes in equal parts (½ cup each) and pour table distilled vinegar.
- As a result of mixing the substances, a chemical reaction will occur, accompanied by the formation of a large amount of foam. In view of this, it is recommended to close the drain hole with a stopper and leave for 2 hours.
- After the specified time has passed, remove the plug and pour a little boiling water into the pipes.
By using this method deposits on the inner surface of the pipe are dissolved, and powerful cleaning occurs.
Cleaning sewer pipes is also possible using salt and soda ( recipe No. 3):
- Pour the ingredients (½ cup each) into the pipes through the hole.
- Add boiling water and leave for 8-10 hours. During the specified period of time, do not allow anything to flow into the pipe.
As you know, it is better to prevent a disease than to treat it. The same applies to sewer blockages: periodic prevention removes accumulated waste and does not give it the opportunity to “grow” into big problem. To prevent the formation of blockages, it is enough to sometimes pour boiling water into the pipes; it dissolves soap and grease.
Or you can use this method ( recipe No. 4):
- Combine 1 cup salt, 1 cup baking soda and ¼ cup cream of tartar. After thoroughly mixing the components, place the mixture in a tightly sealed container.
- Periodically pour the mixture into the hole and fill it with boiling water.
- After 1 minute, rinse the drain with cold water.
Chemicals
In addition to homemade mixtures, there are other ways to clean sewer pipes. On shelves modern stores you can find a variety of ready-made chemicals that help fight blockages in pipes: from the “Mole” powder, available to everyone, produced in Russia, to expensive gels, produced in Germany. If you are in doubt about what to use to clean your pipes, know that in the fight against grease blockages, any of these products will be a winner. The main thing is to read the instructions on how to clean the pipes with the chosen preparation.
On the label of its products, the manufacturer indicates that it is enough to pour the substance into the pipes and wait for a while.
Pro tip:
However, in practice it often turns out that this is not enough and the use of a plunger is additionally required. With its help, dissolved chemical reagents the clog leaves the pipes and goes into the sewer.
Plunger in the fight against blockages
The ingenious invention of mankind, the plunger, can safely be called the most effective means fight against blockages. A plunger is a manual and most popular plumbing equipment for cleaning sewer pipes. It perfectly clears clogged pipes coming from the sink, bathtub and toilet from blockages. The principle of operation of the device is a double action on garbage:
- strong pressure at which the blockage begins to move inside the pipe;
- destruction of the blockage.
When accumulated waste breaks down, it sometimes comes out of the pipes and can be easily removed.
A positive result in eliminating blockages is achieved only if you know how to clean pipes with a plunger correctly.
This is done like this:
- If there is an overflow hole in the pipeline, close it tightly (with a lid, rag, etc.) to prevent the pressure on the blockage from being reduced.
- Place the plunger over the drain hole and press the rubber part firmly against it. When working through a clog with a plunger, make sure that the water level in the sink (bathtub) is above the rubber valve.
- Make rhythmic forward movements with the plunger without lifting the rubber element from the drain of the sink (bathtub, toilet).
- Pull the plunger sharply away from the hole.
Cleaning sewer pipes using a cable
Cleaning cable
It happens that a blockage has formed in the depths of the sewer, and you don’t know how to clear it sewer pipes. Then specialized equipment will come to the rescue.
The most common and affordable type of such plumbing tool is a flexible shaft, or cable for cleaning sewer pipes. It is made of steel wire and is an elastic but easily bendable long spring. At one end of the flexible shaft there is a metal handle for ease of use, at the opposite end there is a spiral that serves to secure various replaceable attachments (scraper, brush, hook, etc.).
Instructions for use of plumbing cable
- visual inspection of the instrument - allows you to identify a violation of integrity;
- checking the reliability of the handle;
- if necessary, lubricating the bushings that make up the handle;
- quality control of installation of replaceable nozzles (if any).
If you are convinced that the hose is working properly, proceed to cleaning the pipes:
- Taking the handle in your hands, guide the other end of the cable into the sewer pipe. In this case, the siphon can be removed from the sink, this will improve the quality of pipe cleaning.
- Make rotational movements with the cable, trying to push the shaft as deep as possible. Translational movements allow the tool to quickly and without interference overcome bends and bends in the sewer pipeline. However, putting too much pressure on the cable may cause it to break or damage the inside of the pipe.
Pro tip:
When you need to give a large torque to the plumbing cable, rotate the handle strictly clockwise. Otherwise, the flexible shaft may break and unravel.
- Having felt the blockage, increase the intensity of rotation of the cable: this will push the debris through. If the flexible shaft has a hook attachment, hook the debris and pull it out.
- As soon as the water begins to flow down the drain, turn on the hot water. Flush the pipes with a weak stream of water, gradually increasing the pressure.
- Evaluate the result: if a funnel forms when draining the water, the sewer system has been cleaned correctly.
Pro tip:
It happens that a plumbing cable gets stuck in a sewer pipe. In this case, slowly rotate it to the left or right until you overcome the obstacle.
Most often, at least one of the described techniques allows you to cope with something clogged in the pipes. household waste. However, if you have tried all cleaning methods, but the blockage is still not removed, contact a specialist for help. Plumbers, as a rule, have more powerful methods of cleaning sewer pipes, capable of flushing pipes under high pressure and removing the most difficult blockage. In addition, masters have specific skills and know what manipulations are best to use.
Anyone in their apartment may experience such a nuisance as clogged pipes. To combat it, you can use a wide variety of means: a proven plunger, plumbing cable, soda ash or chemicals with acids and alkalis. For those who cannot tolerate various types of chemicals, you need to take drugs with bacteria, then you don’t have to be afraid of allergic reactions.
But the most important thing is prevention, which needs to be carried out on time, and maintaining cleanliness.
How to choose the ideal solution for clogged pipes? Let's consider this issue in more detail.
Why does blockage occur, how to avoid this problem?
The problem of clogged pipes is familiar to every homeowner. Why does it occur, and for some people constantly:
Before you start cleaning the pipes, the most common questions arise: “What can I use to quickly and effectively clear the blockage?”, “Which product is the best?”, “Will the drug damage the pipes?”, “What is better to buy: gel or solution?". Let's look at the basic tools that will help you quickly solve the clog problem that has arisen.
In total there are 4 main types of funds:
What are they made of?
Any product always contains alkalis and acids. Alkali perfectly dissolves any fats and accumulation of small debris. These products are ideal for the kitchen sink.
The acid composition is used to remove soap scum and lime deposits. This product is ideal for the bathroom.
One of the most frequently asked questions is: “Is this acidic or alkaline cleaner harmful to the pipe?” As a rule, such preparations are created by chemists who have studied in detail any effect of the products on pipes made from the most various materials. Therefore, before you begin cleansing, you need to read the instructions. In it you can find the answer to the question posed: “Is it possible to use this tool for PVC pipes or metal?"
You cannot increase the time of action of the drug on the blockage, otherwise you will have to start unscheduled pipe replacement.
Be sure to read the instructions! This is necessary for correct and safe work with a chemical!
Rating of the best anti-clog remedies
The most famous and widely available remedy. Its effectiveness has been proven for a long time. This substance is currently available in various types: gel, granules and liquid. This alkali-based product removes grease and debris well.
Rules of use:
- Bring at least 3 liters of water to a boil and pour this amount into the clogged pipe.
- Mix the liquid well and pour 250 ml into the pipe opening.
- Don't touch anything for 3 hours.
- Rinse off the product with water by turning the tap.
In some cases, the water continues to drain with difficulty. Take a plunger and push the now soft remaining dirt out.
Its contents: sodium hypochlorite, chlorine bleach 5 - 15% and nonionic surfactants.
Application:
- Bring 3 liters of water to a boil and pour into the drain.
- Fill half of the special glass with Tiret.
- Pour into the drain hole. Depending on how severe the blockage is, the action time is up to 35 minutes.
- Rinse again with boiling water.
The disadvantages of Tiret are a strong odor, high fluid consumption and not always positive results.
An excellent product that is ideal for plastic pipes. The advantage is convenient packaging. One sachet weighing 60 grams is required at a time. Homeowners consider the main advantages of the product to be: convenience, good effect and inexpensive price. If you purchased a red sachet, its contents dissolve in hot water. Cool water is also perfect for green packaging.
It contains: caustic soda, sodium nitrate, dyes and fragrance.
Application:
- Open the bag and pour into the drain hole.
- Pour 250 ml of boiling water there.
- Wait 15 minutes and wash off the remaining dirt and grains of the substance with boiling water.
Prohibited for use in toilets. When working with Floop, you must follow safety precautions. The product may splash upward and get into your eyes. Another drawback is the strong unpleasant odor.
This product only takes 3 minutes to effectively remove the most difficult clogs. You need to be very careful when working with it. As soon as the product enters chemical reaction, it is ejected to the surface. Do not lean over the sink, as the smell of the substance can be harmful to health. Do not go beyond the dosage and recommended time.
It contains only 2 components: sodium hydroxide and surfactant.
Operating instructions:
- Remove accumulated liquid from the sink using a syringe or a regular rag. 5 cm is the permissible distance from the mesh to the water level.
- Pour 100 grams of the substance into the drain.
- Leave everything alone for 3 minutes.
- Pour 250 ml of hot water into it.
Disadvantage: very caustic. Be careful not to get the product on adjacent surfaces, especially corrugation and enamel.
A very popular remedy among housewives. It is ideal for removing any blockages in the drains coming from the kitchen or bath. This soft solution will not harm expensive plumbing fixtures and pipes made of plastic and metal. It does not have a pungent odor, but the result takes a long time to arrive.
It contains: sodium hydroxide and filler.
Usage:
- Remove all water from around the drain.
- Pour the contents of the sachet into the drain or sink.
- Wait half an hour. After this, pour a glass of hot water into the pipe, then turn on the tap and rinse the drain thoroughly. If the plug is large, the contents are left for 12 hours.
- If there is no effect, cleaning must be repeated.
The disadvantage is that Mr Muscle is too expensive.
For those who do not want to use chemicals, you can offer products that contain live bacteria. These drugs are not harmful, non-toxic and do not affect human health at all. Ideal for those who suffer from asthma or allergic diseases.
The most famous trade marks, producing the following drugs: Probiotica in Progress (PiP), Binatec, Chrisal, HD Unblocking, etc.
How probiotics work
Bacteria, penetrating into the pipes, begin to absorb fatty deposits, accumulated food residues, and small debris. At the same time, all harmful microorganisms are destroyed, and the terrible smell disappears.
The microflora of probiotics prevents the number of microbes in the sewer from increasing and protects the metal from corrosion.
The main composition of this useful product:
- lacto- and bifidobacteria;
- lactic acid bacteria;
- acidobacteria;
- organic.
This drug is easy to use. It is enough to shake the can and dilute the composition in accordance with the recommendations specified in the instructions. Pour the contents into the hole in the pipe and leave for 12 hours. To achieve greater effect, you can repeat the procedure after a few days.
If you prefer to remove blockages with proven traditional methods, then you should use the following recipes:
1 way
This is an excellent preventive measure. It is advisable to carry out this cleansing once a week. To do this, remove the remaining water from the sink and pour 100 grams of soda ash into the hole. Leave for 30 minutes. After this, we wash away all the accumulated dirt and the resulting congestion with water pressure.
Soda ash is an excellent substance for removing mold, cleaning pots and pans from carbon deposits, and washing things. If you don’t have ash powder on hand, you can use regular soda and increase its quantity.
One of the best ways to combat limescale and fat deposits. The disadvantage of this method is the release of toxic chlorine. Therefore, when working with this substance, you should open the windows, cover the drain hole with a rag and leave the room.
Stages of work:
- We pump out excess water.
- Pour a mixture of calcined and regular soda. You need to take 50 grams of each powder.
- After 30 minutes, pour in 150 ml of 9% vinegar.
- Immediately after this, add 150 ml of chlorine bleach to the pipe.
- Leave the room.
- Wait 30 minutes, then enter the room and open the water tap. Make sure the clog is cleared.
Once the pipes are clear, you should ventilate the room well and continue to use the plumbing as before.
In order to completely dissolve lime deposits, you need to apply citric acid. It will effectively remove plaque from the bathroom. To start the procedure, you need to pour 50 grams of acid into the drain and pour in 250 ml of very hot water.
Owners of country houses
In those households where there is no sewerage system and basic amenities are located on the street, it is recommended to carry out cleaning using septic tanks or local treatment plants. In this case, processing fecal matter occurs with the help of special microorganisms.
Chemicals should not be used as this will destroy microorganisms that help in waste management. Restoring their livelihoods will be problematic and costly.
Therefore, well-known cleaners based on living bacteria are used to clean cesspools.
Terms of use
- Dilute the solution exactly as written in the instructions.
- Pour into cesspool or pipe.
- Try not to use this toilet or sewer for a day. All this time, bacteria will break down fats and dissolve all accumulated debris.
- If the pipe you were cleaning is also clogged, use a plunger.
This is the simplest and most environmentally friendly way to remove blockages in any type of sewer. It is based on bacteria that actively destroy all blockages. But you need to know that microorganisms begin to act only at higher temperatures.
So, to quickly and successfully clean the sewer, you can use mechanical methods(cable or plunger) or pour in chemicals that contain acids and alkalis. Or you can use proven folk recipes. Solutions that contain living microorganisms are perfect for septic tanks.