As a rule, heating radiators are located directly under the window sill and are visible to the naked eye of the visitor. They rarely decorate exquisite interior and you have to think about how to decorate them. Some resort to decoupage, while others install or hang decorative grilles on the heating radiators of the most different forms and colors.
Video demonstration
Key Features and Benefits
Decorative screens have become a practical and elegant solution to the problem of hiding bulky heating radiators. Designs that are so simple at first glance can perform more than one useful function:
- Protect radiators complex shape from the accumulation of debris and dust, greatly simplifying the cleaning process
- They are an additional barrier for small children who may accidentally touch a hot radiator and get burned.
- Promotes better distribution of heat throughout the room and more uniform heating
But the most main function radiator grilles – decorative. With their help you can embellish and even complement the most sophisticated interior. They ennoble and emphasize the stylistic direction.
Decorative grilles for heating radiators divided by criteria:
- Design Features
- Material of manufacture
Design Features
Depending on the design features, decorative screens are divided into a number of subtypes:
- Extension box - it completely hides the heating equipment from view
- Hinged screens with a lid - they are intended for heating devices that protrude from under the window sill
- Hinged screens without cover- they are intended for heating devices that do not protrude from under the window sill
- Flat screens– an excellent solution to protect a radiator mounted in a niche
The front surface of the screens can be semi-open or completely closed.
An interesting heating option using water convectors from the point of view of decoration and efficiency,
Production material
The materials from which decorative screens for heating radiators are made are very diverse. The following products can be found on the market:
- Glass
- MDF screens
- Plastic
- Wooden
- Metal
Glass
Glass decorative screens are among the most exotic. Such products are the most expensive, but they look truly beautiful. They are widely used in office premises and have an exquisite design, which is developed individually for the customer. Images and textures are applied to the surface in a wide variety of ways (engraving, matting, etc.).
MDF screens
Decorative MDF screens for heating devices are considered one of the most affordable. They replaced more expensive natural wood products.
According to experts, the strength of MDF products is twice that of wood. The material is environmentally friendly, it does not emit harmful substances that have a negative effect on the body.
Ease of processing is another feature that has led to the widespread use of MDF products on the market. They can be easily shaped into any shape and a wide variety of patterns and images can be applied.
Plastic
Plastic products can be classified as classic. They are among the most affordable on the market. Credit must be given simple maintenance and durability.
The market is rich in a wide variety of models, to which manufacturers give any shapes and textures, and apply a wide variety of designs. However, in addition to style, due attention must be paid to the quality of the material used. It directly affects the cost, but plastic that is too cheap can be toxic. When heated, it releases substances that can be harmful to health.
Wooden
Decorative grilles for heating radiators made of wood will never lose demand and will never go out of fashion. However, their industrial production is practically not carried out; it is necessary to order products and individual craftsmen.
Particular attention must be paid to the type of wood and its quality. Under the influence of temperatures, its internal structure begins to collapse, the screen will begin to warp and shrink.
The undeniable advantages of wooden decorative screens are their naturalness and environmental friendliness. They are able to complement even the most sophisticated interior, adding warmth and comfort.
Screens are manufactured strictly according to the size of the heating radiator. Given the low thermal conductivity of wood, much of the heat may not be able to enter the room, remaining to circulate inside. For converter heating systems Wood products are contraindicated.
Metal
Metal screens, which have an excellent quality ratio, will never lose their popularity. performance characteristics and cost. They have no effect on heating device, its service life and reliability.
The production of metal screens is carried out from thin steel with a high thermal conductivity coefficient. Even completely closed structures give in environment everything is warm.
Click to enlarge image
Thanks to development modern methods processing and painting of metals, they do not fade or corrode even after years. Constant temperature changes and aggressive environments do not affect the quality and structure of products in any way.
Metal gratings are relatively inexpensive and easy to install. The main thing is to choose the right size so that it matches the dimensions of the device being covered. For non-standard radiators, you have to order the grille individually.
How to reduce heat loss
It is no secret to many that placing a heating radiator under a window sill reduces its efficiency by 4%. If you place it in a niche, efficiency can drop by as much as 7-8%. Decorative heating screens have the same effect. Designs that cover the entire battery can reduce efficiency by 30%.
To reduce the amount of heat loss by installing decorative screens on the radiator, you should remember a few very useful rules:
- Ventilation screens must not be covered by a canopy.
- The visor should point warm air up rather than holding it down
- The surfaces inside are blackened, so that thermal infrared radiation is directed into the room
- Metal or foil reflective screens are installed on the wall
And in order not to overpay for heat, we recommend that you use batteries yourself
Average prices of decorative grilles for heating radiators
The modern market amazes everyone with its variety of offers for various categories of goods - decorative grilles are no exception. Products differ not only in materials, but also in shape, configuration, color palette, manufacturers, etc.
Potential buyers are offered not only factory production models, but also custom-made products. If we talk about the average cost of products, we can name figures from several tens to hundreds of dollars. For a classic battery of 7-8 ribs, a metal or plastic product will cost about 15-50 USD e.
Let's sum it up
Taking advantage of the demand, decorative grilles for heating radiators are increasingly found not only in offices, but also in private homes. Moreover, everyone must make an individual choice, since it depends only on capabilities, wishes and personal preferences.
Grilles for heating radiators
Although heating radiators do an excellent job of heating rooms during the cold season, they will not always look aesthetically pleasing and fit into a sophisticated interior. That is why owners of houses and apartments often resort to using elements such as grilles for heating radiators. Such grilles can not only update your interior, giving it new sophisticated features, but also protect against hot metal and make it easier to care for heat sources in your home.
Currently, the market is simply filled with an incredible number of variations of grilles for heating radiators, so choosing the right ones for yourself will not be difficult. Let's figure out what grilles for radiators can be and how they differ from each other.
Variety of radiator grilles
It’s worth noting right away that grilles for heating radiators should not only be attractive, but also resistant to prolonged exposure to high temperatures. temperature conditions. After all, the heating season lasts quite a long time, all this time the grilles will be in contact with the heated metal of the batteries.
If we evaluate heat resistance, the materials will be as follows:
- MDF. This is an imitation of wood, but the cost of such gratings is less. Decorative grilles for heating radiators made of MDF can be of various shapes, they look great, and different images can be applied to their surface.
- Tree. Wooden grilles for heating radiators are usually made from valuable wood, which is why such grilles are expensive. They go well with other interior items and are suitable for almost any style. But under the influence high temperatures Heating radiators can cause the wood to become deformed and dry out. Wood is an indicator of sophistication in the interior; in addition, such grilles will add coziness to your home.
Wooden grilles for heating radiators
- Glass. Glass grilles for radiators are included in the expensive category. They are made from frosted or colored glass. You can also find gratings with a printed pattern. It is worth noting that the material is not very practical - after all, glass may not withstand an accidental mechanical shock or prolonged pressure. You should handle it carefully and carefully so as not to accidentally break it.
- Metal. Metal grilles for heating radiators are the most common; they are often used in living conditions. It's practical and convenient option hide batteries from prying eyes and decorate your interior with a stylish element.
- Certain types of plastic. Plastic gratings for heating radiators are included in the category of budget products. Very often, such grilles are used in public spaces and office buildings. And if the material is not of high quality, then when heated, such gratings can be hazardous to human health.
Flat grilles are usually placed on radiators that are mounted in niches. Mounted - made with or without a lid. There are also PVC grilles for heating radiators in the form of a box - they are used if it is necessary to completely cover the heating elements and communications.
Why metal?
Metal grilles for heating radiators do not have any special design - however, they are very practical in all their variations. As a rule, such gratings are made of thin sheets of steel. They are powder painted, so their service life is increased.
Decorative grilles for heating radiators made of stainless steel do not require painting, since the material itself has good aesthetic characteristics.
Sometimes such material is perforated, resulting in a complex pattern. But such models will fit perfectly only into an interior created in a high-tech style.
Metal grilles for heating radiators in high-tech style
Thus, metal grilles for radiators have many advantages, which have led to their widespread use:
- There is no need to repair or paint them.
- They will not interfere with heat transfer.
- Made from materials that are safe for human health.
- They are easy to install.
- They do not deform from heating.
- If dirt appears, it is very easy to remove.
What affects the cost of battery grids?
Radiator grilles can help you save money financial resources. And if you are normal cast iron batteries, which provide excellent heat transfer, but have an unsightly appearance, it is not necessary to remove them. All you have to do is just buy grilles for them - and they will be hidden under stylish elements interior, successfully complementing it.
So, the cost of the grille will be influenced by several factors:
- Material of manufacture. Certainly, wooden product made from expensive valuable wood will cost more than a plastic product.
- Brand and trademark. There is no point in arguing that if you are looking at identical products made in Germany and China, their prices will be completely different.
- Dimensions of grilles for heating radiators. If you order non-standard design, then the cost of such a product may be higher – even by 50%.
- Decoration. If you order a product with curly legs, complex weaves, beautiful edging, then it will cost more than standard gratings.
- Design features. Flat gratings will be cheaper than closed boxes.
- Color and method of painting. When ordering expensive exclusive variations such as “wood”, “gold”, etc. the cost of such products will be slightly higher than just white powder coating.
Decorative grilles, as seen in the photo, in any design can add completeness to your interior. The decoration of the room will no longer be spoiled by sometimes completely unsightly cast iron radiators heating. In addition, the owners of the premises will like not only the design task of the batteries, but also the ease of caring for them - after all, you will no longer have to paint the batteries, and sometimes this is precisely what is difficult to do due to the design of the heating radiators.
The appearance of bare batteries does not always correspond to the owner’s idea of beauty. Decorative grilles can solve this problem. They disguise old radiators and when the right approach perfectly complement the interior design of the room. However, radiator grilles have not only aesthetic, but also several very practical functions.
Why are there grilles on radiators?
The grilles prevent human contact with too hot radiators (primarily this applies to old cast-iron modifications), protect against possible bruises from sectional ribs or protruding metal plates of convectors. It is also important that the grilles, in principle, make it difficult to access the radiators, and this reduces the risk of careless and careless handling of them.
The radiator grille also resists dust from the batteries. Dust particles settling on hot battery and gradually decomposing under the influence of significant temperatures, fill the atmosphere of the room with decomposition products. This is harmful to the health of people living indoors (especially harmful for allergy sufferers and those who suffer from asthma). But if there is a grille, it is she who takes over everything - as a result, the dust is decomposed to a much lesser extent. And in order to prevent an increase in dust concentration, the grille should be periodically washed or cleaned with a vacuum cleaner.
Another possible purpose of the grilles is to enhance heat transfer. There are schemes for installing lattice screens with different thermal efficiencies. A well-designed and placed enclosure can significantly increase the heat transfer of the battery.
Differences in design
Depending on how the grilles are located relative to the heating batteries, three types are distinguished:
- flat;
- with lid;
- volumetric.
Flat grilles (screens) hide radiators, fittings and pipes recessed in niches. Grilles with a lid that fit directly onto the fins of the heating elements. They are capable of covering the radiator both from the front and from the top. It is important to use them if the battery protrudes slightly from the plane of the wall. Volumetric grilles cover the radiator on all four sides, resulting in a full-fledged box.
Differences by material
Classic options in this case include wood and metal gratings. However, now they are also made from other materials, for example, MDF (MDF), chipboard, glass and plastic. The capabilities and effectiveness of their use depend on the properties of each of these materials.
Features of the tree
Wooden grilles for heating radiators are, as a rule, exclusive, a kind of piece product with carved patterns. Wood structures look great when they are used for batteries that protrude noticeably beyond the line of the window sill. However, it’s also flat wooden version lattice can also turn out to be a real masterpiece.
Such a lattice will become important element furnishings (no less important than sofas, armchairs and other pieces of furniture) and interior decoration of an apartment, office or home. And also the gratings made experienced craftsman made of wood, can improve the microclimate of the room. Natural wood, as studies show, has a real healing effect - that is, the choice in favor of this material is more than justified.
In general, wooden structures are characterized by:
- durability;
- reliability;
- environmental cleanliness;
- excellent heat dissipation.
A the best breeds wood for similar products oak or beech are considered.
However, it is worth pointing out the shortcomings. Practice shows that voluminous wooden grilles do not withstand temperature changes in the radiator area very well. Some of them warp or become cracked after 2-3 heating seasons.
Advice! Warping wooden structures can be avoided if inside, near the radiator, place a container of water.
Advantages of metal
This is the most practical option, which, according to some parameters, has no equal in the radiator decoration market today. Here are some key benefits of metal gratings:
- super-resistant to temperature changes and mechanical stress;
- insensitivity to changes in pressure and humidity levels;
- ease of installation;
- low prices (this is due to the fact that the manufacturing technology itself does not involve too significant costs);
- long service life;
- wide range of models.
Metal decorative grilles for heating radiators are usually beautiful sheets with holes in an exquisite pattern.
Making a metal grating on your own is quite difficult (especially if you do not have welding skills) - it is better to buy ready product. Moreover, now in many companies you can order a product at custom sizes, If standard samples are not suitable, for example, because the radiator has a unique shape or is installed in an unusual location.
Can I use plastic?
This material is used everywhere today, including for the manufacture of radiator grilles. Plastic panels They really attract with their very affordable cost and variety of shapes. But at the same time, they quickly lose their original appearance (compared to steel or wooden counterparts).
And when plastic is heated, substances are released into the air that are undesirable for human health - they can penetrate into the lungs, cause a cough, a sore throat, and make the eyes water.
Attention! Despite the low cost plastic products, it is prohibited to install them in children's or health care institutions.
How to make it yourself
First of all, you should choose the design format itself. If the battery is located in a niche (alcove), a grid in the format of a flat screen would be appropriate to enclose and decorate it. Such a screen is always selected taking into account the actual dimensions of the niche, and the installation of this product is actually not too difficult.
But much more often the batteries are suspended and located under the window opening. In such situations, experts advise making a choice in favor of mounted radiator grilles.
Materials and tools used
Among existing options When making a flat radiator grille, the easiest and fastest options are MDF or chipboard. This design is quite simple to make. For this you may need:
- MDF or chipboard sheets, the colors of which will harmoniously fit into the existing interior;
- hacksaw;
- wood glue;
- sheet steel mesh, which will be used to install the front and two side panels;
- sheet of metal to create a reflector;
- nails;
- screws, staples and possibly other fasteners.
Of course, you can’t do without a tape measure and a pencil. If desired, you can use decorative perforated MDF for the grid.
Making the grating step by step
The manufacturing process of a radiator grille can be described as follows.
First, the height and width of the radiator are measured. Then you need to add 10 cm to the width and 5 cm to the height. It is on the basis of the results obtained in this way that the front panel will be manufactured.
The depth of the radiator is also measured. Another 2.5 cm is added to the resulting value - this is exactly the width of the side panels of the future product.
The dimensions of the screen cover are measured in exactly the same way (and still, its dimensions should ultimately be a couple of centimeters larger than the dimensions of the sidewalls).
After completing the measurements, you can begin cutting parts. To create a front profile, take sheets of MDF or chipboard and cut out rectangular parts about 11 cm wide from them. And then, using a hacksaw, make angles equal to 45 degrees in the contact areas.
A metal reflector is installed at the rear wall; its dimensions should be approximately the same as the decorative grille itself. This reduces heat loss and waves infrared radiation from the battery will be redirected from the near wall to the middle of the room.
Then a steel mesh sheet is installed, which in this case plays the role of a frame, and the structure is assembled from the previously cut parts.
The flat grille can be attached not only to the frame, but also to anchor collets. However this method due to the need to purchase expensive parts, it is not very popular among those who want to make the screen themselves.
1.
2.
3.
4.
5.
6.
Today, such an interesting and at the same time functional decorative element as a grille for a heating radiator can be found in many homes. Some people mistakenly believe that such designs are gradually becoming a thing of the past, although for the most part, knowing all the functions and features, such an opinion can be easily refuted.
The main advantages of this type of finishing can be noted:
- the ability to hide imperfections using radiator grilles;
- the ability to change the design without replacing the radiator itself, which will look great in the photo;
- protection from burns and injuries;
- prevents the formation of dust on the batteries, which increases the heat transfer of the entire system.
It should also be noted that although the system itself is called a radiator grille on a battery, the overall design can be either lattice or shielding, on which various designs or prints can be applied (read also: " ").
As for sizes, they can be either standardized or individual. The model and design are selected depending on the heating system itself. So, if the width of the battery is small, then you can use a flat screen. But in the case of camouflage of the entire structure, it is necessary to purchase both the top and side stripes.
One more important parameter When choosing a grille for radiators, the type of fastening is important. So, based on the immediate model and condition of the radiator, the grille under the battery can be mounted both on the wall and on the heating structure itself using specialized hooks. Such panels without special labor are dismantled, thereby providing fast access to parts of the radiator itself, which is also convenient during the process of cleaning and maintaining the entire system.
Material type
As for one more important characteristic, the radiator grille for the battery may vary according to the types of material from which the heating screens are made. They may vary depending on the conditions and type of environment.Metal grilles for batteries
This type of material is considered one of the most common. A convection grille for this type of battery is made of metal, the sheets of which are then perforated. This method allows you to create unique design depending on customer preferences. In public places or office premises, as a rule, classic panels are installed. The frame itself is made of metal, and rods are attached to the frame, the size of which depends on the type of room in which the radiator grille is installed (read also: " ").
- good moisture resistance, which is especially important in the case of severe condensation of adjacent floors;
- the ability to easily be repainted in a variety of colors and textures, can even be closed;
- a seamless and accessible care process;
- is toxically harmless even in the case of high degree heating;
- absolutely independent of the type of microclimate in the room;
- high strength and resistance to deformation.
Wooden grids for batteries
This type of material will fit perfectly into almost any room, especially if it contains wooden items interior In most cases, oak or beech is used as the main material. Moreover, wooden grilles for batteries can be made from cherry, ash, or other types of wood.
However, when using this type of grating, it is worth paying attention to the fact that wood is not highly moisture resistant, so using wooden gratings Not recommended in bathrooms and kitchens.
MDF board gratings
This type of material in many cases is several times stronger than the above-mentioned wooden gratings. An undoubted advantage will also be high environmental friendliness; moreover, such grilles can be easily repainted and washed. However, the level of heat transfer is still lower than that of the above.
Plastic grids for batteries
This type of material is used quite rarely nowadays, mainly due to its low resistance to deformation. Moreover, plastic battery grates are also considered environmentally harmful, since when heated, polymer substances are released into the room.
As for the average cost of gratings, depending on the material of manufacture, size and configuration, in Moscow prices vary from 540 to 900 rubles. for MDF bars, from 140 to 1650 rubles. for wooden ones and from 320 to 650 for metal ones. You can buy these at almost any construction market or in a special construction goods store.
How to install a grid on a battery
Of course, radiators or other heating structures are present in every home, so in some cases it will be more profitable to install such a structure yourself. Considering that cast iron is used as the material of the main system, the process of masking the battery can be quite neat and simple.It should also be taken into account that a do-it-yourself battery grate made of wood will be the most the best option, since it is quite simple to purchase and process, and there is no need to purchase special equipment for installation.
How to make a grill for a battery, watch the video:
The whole process is as follows:
- .First, you need to measure the battery, including its width and length, the distance between the bottom of the battery and the floor, and between the front edge and the wall. Then you should determine the size of the allowance that will be required when installing the parts itself. You should also mark at least two points for attaching the screen to the floor and wall.
- Next, you need to decide on the material. If the grid for the battery is made from wood, then wood is used for the frame, but the mesh is made from fabric strips.
- Then, we proceed to cut out the parts of the required size, and also process them well to minimize the destruction of the rock.
- We assemble a frame from metal slats, which are fastened with self-tapping screws.
- Then we attach the created frame structure in place.
Alternatively, you can pull plastic mesh, so the front part will be solid and you can put wallpaper on it.
Old heating batteries, as well as modern radiators have a number of positive properties. The main task of a radiator is to heat the room. Therefore, it is natural that among them negative qualities aesthetics definitely plays a significant role. The rather rough shapes of old radiators lead to particular embarrassment for the owners and other residents of the house when they need to invite friends or relatives to visit. IN modern radiators this problem occurs less frequently because they are often decorated with decorative elements.
But the need to hide part of the heating system from view remains relevant in most cases. One of the most the best ways The way to do this is to install decorative grilles on the heating radiators. There are several positive aspects to using decorative grilles that will not only lead to appearance premises to a certain standard, uniform style and will become an indispensable part of the interior. It's easy to see the difference specific examples, including evaluating the design of rooms with radiators before and after installing decorative grilles.
To decide which options for decorative grilles are best suited to the design of the rooms and at the same time ensure the full functioning of the heating system, you need to know what types there are and how to install grilles for placement on radiators. And how safe are the materials from which they are made?
Types of gratings
There are several factors by which gratings are classified. As a rule, two of them are considered main:
- installation method;
- manufacturing material.
Although sometimes there are also other divisions into types, for example, according to the characteristics protective coating surface, environmental friendliness and other differences. But these differences most often depend on two fundamental factors, which should be considered separately.
Design issues are also a separate area in which there are a lot of nuances. Classic options and examples design solutions can be assessed from the photo after final choice base material and constructive solution for gratings.
Installation method
The internal layout of the room and the location of the heaters in it influence the choice of a specific type of grille.
There are two main types of gratings, which depend on the installation method:
- mounted;
- attached.
Hanging grilles
Hanging grilles can be installed in several cases:
- the radiator is installed in a niche;
- the radiator is installed under a fairly long window sill;
- The radiator is against the wall.
In the first two cases, the grille is flat, but there are differences in the installation method.
A heater located in a niche is most often covered with a decorative flat grille, which is attached to the wall on both sides with self-tapping bolts or other fasteners. Sometimes used additional elements, creating fastenings for organizing removable hanging grilles. This is a good option that allows you to quickly access the battery, for example during a breakout, for repairs or painting, without destroying or damaging the grill itself.
In the case of installing a heating element near a window, when its width matches or is slightly less than the width of the window sill, a flat grille can be used, but only with a top fastening. It is better to use for this type of installation not a flat decoration, but one with side panels that protect end sides heater, and also hide them from view. In this case, there can be several fastenings: top, side or combined (top and side).
If you install the battery directly next to flat wall without a window, as shown in the photo, they use a hinged panel with a top strip, which may also have side strips. The types of fastening are appropriate.
Using a hanging grille with covers or side panels can completely change the appearance of the battery, but when choosing this option, carefully plan the mountings. In some cases, you can do without fastening parts. For example, if the hinged grill cover fits well on the top side of the battery. But experts still recommend using fasteners in this case: load-bearing bolts, clamps, clips and others.
Attached grilles
Attached grilles are the easiest decoration method to install and the most universal, since they are suitable for almost all of the listed types of installation of heaters in a room.
Attached decorations have two important advantages:
- they do not require mandatory preparation of fasteners, which often leads to surface damage and even destruction of walls and window sills;
- they can be installed at any distance from the walls and are often part of an overall design solution.
The disadvantages of attached grilles also include some factors. Although they do not require the same fastenings as mounted ones. Their fixation on the floor, near walls or other furniture elements is simply necessary. They most often have a lot of weight, which gives them additional stability, but makes them inconvenient to transport, install and dismantle.
Added decors are often characterized by a certain pomp, because they are usually used as individual elements interior design or furniture. Therefore, their use is more justified in residential premises, work rooms, classic style etc. They are unlikely to be suitable for offices, common corridors or bathrooms.
Raw material
Several common materials are used to decorate water heaters in the house:
- different types of metals;
- wooden boxes and attachments;
- plates and sheets (MDF and others);
- plastic and other artificial structures.
Metal
Metal gratings and boxes are usually stainless steel, already painted before they go on sale.
This is the most practical and widespread option, which has no equal on the market for decorating radiators. Its main advantages are its extreme resistance to any temperature and mechanical influences, as well as its insensitivity to changes in humidity levels, pressure and other conditions.
Stainless metals, mainly used in decorative grilles, have a huge service life. They can be used in any climatic conditions. Some composite variations of metal alloys are quite easy to install and transport. Thanks to standard solutions for fastenings, which can be seen in the presented photos, these variations can be used anywhere in the home, office, study, etc.
From manufacturers metal structures quite democratic for decorating heating systems price policy, thanks to the low cost of manufacturing technology.
Thanks to these advantages, the metal decor of radiators takes a leading position among others.
Tree
Wooden decorative grilles are popular among aesthetes and admirers of environmentally friendly technologies. These materials have one clear advantage. They are of natural origin. Their beautiful appearance can be appreciated by the photo of decorative grilles on heating radiators.
Although wood is environmentally safer than other materials, it sometimes brings some troubles into the house:
- wood is susceptible to drying out and moisture accumulation;
- it requires chemical treatment;
- The tree is quite fragile.
Frequent weather changes, which entail a change in the heat supply regime, open negative side wooden decors. Using examples of photographs of outdated wooden gratings, you can see how badly its surface cracks due to the constant drying out and moistening of the environment.
A pleasant factor influencing the choice of wooden radiator grilles is the wide price range. Lovers of natural materials will find samples ranging in price from low to high.
Wood fiber
Wood fiber is a more simplified and reliable option than wood. It often helps prevent rodents, insects, and moisture, but is still sensitive to these problems.
One of the most popular types is a fine wood fraction (MDF), which has proven itself well for decorating radiators, thanks to some production features. Wood fiber materials are compressed during hot pressing. They perfectly transmit heat and are practically unaffected by the environment; they do not allow moisture to pass through during normal use.
Other types of materials are also widely used: HDF, plywood, fiberboard. They are to some extent inferior to the finely dispersed fraction in terms of strength characteristics, although they are quite convenient for processing and installation, as shown in the photo.
The main disadvantage of MDF is the price, which significantly exceeds the cost of both wooden and metal design elements.
Synthetics
Plastic, PVC and other synthetic materials have firmly established themselves in the market for decorative grilles, as they guarantee any type and desired qualities.
Typically, the set of qualities depends on prices, the range of which for plastic is quite wide. Advantages of synthetic materials:
- strength;
- ease;
- ease of installation;
- relatively low price.
Modern technologies make it possible to create composite and polymer materials, which are in no way inferior in terms of environmental friendliness, strength, safety and ease of installation to other materials.
The main question when choosing artificial materials is how much money the buyer is willing to pay. It is noteworthy that for any wallet there is an acceptable option for plastic, polyvinyl chloride, other composite or polymer coating.
Installing the grille on the radiator is a very simple task. It will be especially easy if both of these elements have standard sizes. For reliable and long-term service of the grille, you need to take care of it and prevent various damages. To choose the best option For own home, you can evaluate photo catalogs. It is advisable to invite a designer who will develop an interior style and suggest what would be better suited to radiators.
The right grille will provide you with an attractive interior design and will become an integral part of it. A regular care will significantly extend its service life.